Relevant bibliographies by topics / Metoda mezních stavů

Contents

  1. Dissertations / Theses

Academic literature on the topic 'Metoda mezních stavů'

Author: Grafiati
Published: 28 June 2021
Last updated: 2 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Metoda mezních stavů.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Dissertations / Theses on the topic "Metoda mezních stavů"

1

Zouhar, Michal. "Deformačně napěťová analýza a hodnocení mezních stavů částí tlustostěnného potrubí v oblasti creepu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228762.

Full text
Abstract:
This thesis deals with the stress-strain analysis of thick-walled pipe parts. The dimension series (characterized by the D/d ratio) of three components are solved, then a direct tube, a torus with constant wall thickness (arcus) and a torus with variable wall thickness (bend). At first, the internal pressure amount, when a fully plastic state for these components is created, is solved. The amount of the limit pressure is determined analytically, numerically and by appropriate normative relations. The results and stress diagrams of individual solutions are mutually compared. Furthermore, these components are solved in the creep and are exposed to the maximum allowable normative internal pressure for 200,000 hours according to the standard – the operating time of components. The place of the maximum equivalent creep strain and the place of the maximum equivalent stress is examined. In these places the principal stresses are depicted depending on the D/d ratio. The results and stress diagrams of individual dimension series are mutually compared. From the available literary sources the condition of the limit state reach is chosen, according to which the evaluation of the limit state reach for individual components is carried out.
APA, Harvard, Vancouver, ISO, and other styles
2

Čejda, Marek. "Spolehlivost zemních hrází ohrožených filtračními deformacemi." Doctoral thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-355620.

Full text
Abstract:
Subject of the dissertation is a probability analysis on creation of embankment subsoil filtration deformations. Out of the broad topic of filtration deformations, the dissertation is focused at initiation of the process. At this phase, the overlying layers downstream of levee get uplifted, and eventually get breached. The process of downstream subsoil failure probability estimation is formulated using mathematical and statistical modelling. Within the scope of parametrical study the suggested method is applied onto a test environment. Results of the probability estimation are compared with results obtained using Limit state design method. The results of stochastic modelling can be used for improvement of Limit state design method precision.
APA, Harvard, Vancouver, ISO, and other styles
3

Poruba, Michal. "Návrh sanace sesuvu." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227466.

Full text
Abstract:
Main goal of thesis entitled "Landslide remediation design" is - based on acquired knowledge and submitted documents about the problematic of landslides - to determine the causes of the landslides on II. class road between villages Koryčany and Jestřabice and to propose optimal redevelopment.
APA, Harvard, Vancouver, ISO, and other styles
4

Kopečková, Hana. "Hodnocení aktuálního stavebně technického stavu existujícího objektu." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-227017.

Full text
Abstract:
This thesis deals about the methodology, implementation and evaluation of diagnostic work of units and structural elements of the residental building built on Gorkého street in Brno. The building is located in the premesis of the vicinity of The Faculty of Arts, where was the extensive reconstruction and also the final extension. The survey was conducted for this reason . The experimantal part of the thesis include a static assessment of the mansory wall.
APA, Harvard, Vancouver, ISO, and other styles
5

Turek, Jan. "Železobetonová základová vana administrativní budovy." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-409781.

Full text
Abstract:
The master’s thesis deals with a design of a reinforced concrete foundation of multi-storey office building. The basement of the building is an underground watertight structure. The design of foundations is a combination of a concrete slab and piles. Internal forces were analysed in RFEM software based on finite element method. The structural assessment of underground construction was performed according to ultimate and serviceability limit states. Due to watertight function of construction, the reinforcement was also designed according to non-force effect in early stage.
APA, Harvard, Vancouver, ISO, and other styles
6

Obršlík, Petr. "Modelování a statická analýza stropní konstrukce v programu ANSYS." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226805.

Full text
Abstract:
This thesis mainly deals with modeling and static analysis of the ceiling structure in the basic environment of ANSYS. The first part is focused on verifying correctness of the model most stressed parts of the structure with a simple hand-static calculation by the process of stress on a continuous beam. The main part is devoted to modeling composite structure, element types, specifying loads and boundary conditions by ANSYS FEM program. In the end, there are the results of stress and deflection presented, and the structure is evaluated at the ultimate limit state and serviceability limit state.
APA, Harvard, Vancouver, ISO, and other styles
7

Čoček, Jan. "Konstrukční řešení mechanismu napínací kladky zkušebního zařízení." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231728.

Full text
Abstract:
The aim of this diploma thesis is the design of automatic tensioning device for regulating forces in driving belts of high-pressure pumps under long-term testing, in collaboration with Bosch Diesel s.r.o. in Jihlava. The paper describes the development of the mechatronic device, from the selection of components, going through the design phase of the automatic electronic device, up to mechanical design and prototype execution. An assessment is made of custom device based on the test in real operations and economic benefits for the client are evaluated in the conslusion.
APA, Harvard, Vancouver, ISO, and other styles
8

Kudrna, Jan. "Návrh nosné konstrukce ŽB objektu garáží." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-239994.

Full text
Abstract:
The diploma thesis deals with the design and assessment of reinforced concrete structure supporting two-storey building of the underground garage for cars. In the space above the garage is designed open area with public space. The project was designed especially outer water-impermeable construction method white bath and a base plate and a perimeter wall. The structure was designed as a comprehensive model. Computing analyzed by finite element method. All selected elements were assessed at the ultimate limit state and limit state, namely to limit state of cracking load and forced stress.
APA, Harvard, Vancouver, ISO, and other styles
9

Zdražilová, Pavlína. "Vícepatrová skeletová konstrukce administrativní budovy." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-372046.

Full text
Abstract:
This diploma thesis deals with design and assessment of selected parts of the reinforced concrete frame of multi-storey administrative building according to the ultimate and serviceability limit state. The aim of this thesis was to design and assess the reinforced concrete structure of a slab above the first floor, one column, a foundation pad and a staircase. In addition to the static calculation, drawing documentation is included. Internal forces were obtained from the 3D model created in computational software Scia Engineer 16.1.
APA, Harvard, Vancouver, ISO, and other styles
10

Tesař, David. "Polyfunkční dům – železobetonová nosná konstrukce." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-372121.

Full text
Abstract:
The aim of the master‘s thesis is static and structural design of polyfunctional house. The load will be determined according to ČSN EN 1990. The finite element method will be used for the calculation of internal forces. The design will be dimensioned according to ČSN EN 1992. Text part, static calculation and shape and reinforcement drawings will form the output of this work.
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography