Relevant bibliographies by topics / Metoda lití na vytavitelný model

Contents

  1. Dissertations / Theses

Academic literature on the topic 'Metoda lití na vytavitelný model'

Author: Grafiati
Published: 28 June 2021
Last updated: 4 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Metoda lití na vytavitelný model.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Dissertations / Theses on the topic "Metoda lití na vytavitelný model"

1

Tirala, David. "Testování a hodnocení vlastností keramických jader pro technologii vytavitelného modelu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-445169.

Full text
Abstract:
Production of top quality castings for applications in energy, aerospace and medical industries by the addition of ceramic cores to investment casting presents many metallurgical and technological problems. Ceramic cores applied in investment casting are subjects to many requirements in terms of their inertness to the casted alloy and at the same time to their final removal from the casting cavity in such a way that does not damage the casting. Both of these assumptions can be achieved by applying a thin layer of inert oxide ceramic coating to the surface of a ceramic core, made out of a chemically removable – leachable oxide ceramic.
APA, Harvard, Vancouver, ISO, and other styles
2

Kinc, Marek. "Numerická simulace výroby keramických jader pro technologii lití na vytavitelný model." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231964.

Full text
Abstract:
The aim of this diploma thesis is validation of numerical simulation of the ceramic core manufacturing in the investment casting proces. The first part submit the theoretical description of the manufacturing of the ceramic cores and a description of the basic principles of numerical simulations. The second part compares the video recording of filling the wax-ceramic mixture to the die-casting mold and simulation of the same process created in a simulation software Cadmould 3D-F.
APA, Harvard, Vancouver, ISO, and other styles
3

Mazůrek, Tomáš. "Optimalizace skořepinové formy při výrobě odlitků ze slitin Al metodou vytavitelného modelu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230072.

Full text
Abstract:
This diploma thesis deals with the possibilities of optimization of ceramic shell molds in the method of investment casting. In the first part is mentioned a complete technological process of the method with focusing on production and quality control of the ceramic shell and components, from which it is produced. The experimental part is divided into two parts, in the first are results of laboratory tests, which were tested both the current ceramic shell and shells which have been considered as a possible replacement. In the second section were verified conclusions of the experimental findings and recommendations of the laboratory results in pilot plant conditions.
APA, Harvard, Vancouver, ISO, and other styles
4

Čagánek, Radim. "Možnosti uplatnění numerických simulací v technologii vytavitelného modelu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-382112.

Full text
Abstract:
The diploma thesis deals with the possibilities of using numerical simulation in investment casting technology. The first chapter of practical part deals with the use of simulations in the design of gating system for the shape-complex casting. At the same time, the practical part verified the accuracy of the simulation by test castings on which the X- ray inspection was performed. The results showed that the occurrence of internal defects predicted by simulation corresponded to the locations in the test casts. Next part of the thesis describes improvement of the use of liquid metal (so called “yield”) by numerical simulations. Two specific castings were chosen to perform simulation of current and newly designed variant of the gating system.
APA, Harvard, Vancouver, ISO, and other styles
5

Mikulka, Vít. "Optimalizace technologie výroby Al odlitku litého metodou vytavitelného modelu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-228936.

Full text
Abstract:
This diploma theses deals with possibilities of using numerical simulation for optimizing production of highly demanding thin-section casting produced by investment casting process. The casting made of aluminium alloy in which the manufacturing process was very problematic (occurrence of macro and micro shrinkages) has been chosen. By numerical simulation the existing technology has been analysed and based on this the possible reasons for defects found. This was later confirmed also by metallographic examinations. Following to this several options for a new technology were proposed and again by simulation checked their suitability. By comparing all above mentioned options two versions have been chosen in the end which was later tested in production with satisfactory results.
APA, Harvard, Vancouver, ISO, and other styles
6

Macko, Martin. "Vliv použitých surovin na konečnou kvalitu Al odlitků zhotovených technologií vytavitelného modelu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-382187.

Full text
Abstract:
The purpose of this thesis is to assess the current state of production of ceramic shells in MESIT Foundry, a.s. and optimize it. The shells are evaluated in terms of their bending strength, gas permeability and microstructure. Subsequently, castings produced using the shells are evaluated with regard to number of non-conforming products and presence of defects. The final part seeks to compare different shells and outlines a possible new approach to the development of ceramic shells.
APA, Harvard, Vancouver, ISO, and other styles
7

Bochníček, Štěpán. "Validace numerické simulace průběhu plnění matečné formy voskem a její následná optimalizace." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230975.

Full text
Abstract:
The main topic of the diploma thesis is simulation of the process when wax is filling the cavity of the "mother" metal die.This knowledge is the neccessary presumption for correct design of the gating system and setting correct injection parameters (temperature, pressure, wax flow) when making wax patterns.
APA, Harvard, Vancouver, ISO, and other styles
8

Kosour, Vojtěch. "Využití numerické simulace k optimalizaci výroby voskových modelů." Doctoral thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-234157.

Full text
Abstract:
Production of wax pattern model by injection machine is a one of the key phases of Investment casting process. The thesis deals with the development of numerical simulation wax blend injection in to metal die. The possibilities of selection simulation software – ProCast and Cadmould are described in the relation to numerical predictions of wax injection. Creating of material database of selected wax blends is described. The prototype simulations of die filling are made. The special testing die are designed a used for created simulations. The measurements of initial conditions are mentioned.
APA, Harvard, Vancouver, ISO, and other styles
9

Žižka, Jiří. "Optimalizace vtokové soustavy s ohledem na využití tekutého kovu při výrobě Al odlitků technologií vytavitelného modelu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-416634.

Full text
Abstract:
This diploma thesis deals with the optimization of gating systems of shape-complex aluminum castings produced by investment casting process. Two castings whose massive gating systems make problem with the use of liquid metal (so called yield) were chosen for optimization. Each casting is described in its own chapter. The individual subchapters deal with description of the original and newly designed gating system. Simulation, test castings, X-ray inspection and metallographic examination were performed for each variant. At the end of each chapter there is an evaluation of the results of the optimization of gating system.
APA, Harvard, Vancouver, ISO, and other styles
10

Úředníček, Lukáš. "Rozměrová stabilita odlitků ze slitin Al zhotovených metodou vytavitelného modelu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-228150.

Full text
Abstract:
The aim of this paper is to compare a bottom filling of a ceramic form made by lost wax process and a top filling conventional method. A computer simulation of filling and casting solidification will contribute to this comparison. The comparison includes evaluation of readings DAS and characteristic readings of porosity with chosen varieties of casting. The results show that the readings DAS did not change much but characteristic readings of porosity were much better at bottom filling. The computer simulation also showed a certain contribution in the field of model smelting technology.
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography