Relevant bibliographies by topics / Method 141

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Method 141'

Author: Grafiati
Published: 28 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Method 141.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Method 141"

1

Извекова, T. Izvekova, Гриневич, V. Grinevich, Гущин, A. Gushchin, Иванцова, and N. Ivantsova. "Bioassay Method in the Estimation of Overall Performance of Plazmachemical Water Treatment Devices." Safety in Technosphere 1, no. 4 (August 25, 2012): 47–53. http://dx.doi.org/10.12737/141.

Full text
Abstract:
This article describes the estimation of wastewater treatment plasmachemical devices using toxicologic testing of model aqueous solutions of organic compounds. It is shown that the bioassay can be used not only as an effective method for assessing the toxicity of water, but also as a criterion for determination of the effectiveness of various methods of water treatment.
APA, Harvard, Vancouver, ISO, and other styles
2

Beets-Tan, R. "141 Rectal cancer staging: which method is optimal?" European Journal of Cancer Supplements 7, no. 2 (September 2009): 35. http://dx.doi.org/10.1016/s1359-6349(09)70124-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

KOYAMA, Akinori, Mariko HONDA, and Haruki OBARA. "141 Treatment of rigid wall in SPH method." Proceedings of The Computational Mechanics Conference 2006.19 (2006): 339–40. http://dx.doi.org/10.1299/jsmecmd.2006.19.339.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Smith, M. A., G. Palmiotti, E. E. Lewis, and N. Tsoulfanidis. "An Integral Form of the Variational Nodal Method." Nuclear Science and Engineering 146, no. 2 (February 2004): 141–51. http://dx.doi.org/10.13182/nse146-141.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Rada, T., R. L. Reis, and M. E. Gomes. "Novel method for the isolation of adipose stem cells (ASCs)." Journal of Tissue Engineering and Regenerative Medicine 3, no. 2 (February 2009): 158–59. http://dx.doi.org/10.1002/term.141.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Hamdi, Saibatul, and Arhamsyah Arhamsyah. "PENGGUNAAN BAHAN FINISHING PADA ROTAN NON KOMERSIAL SEBAGAI BAHAN KERAJINAN." Jurnal Riset Industri Hasil Hutan 3, no. 2 (December 31, 2011): 7. http://dx.doi.org/10.24111/jrihh.v3i2.1189.

Full text
Abstract:
Development of the rattan furniture industry today is quite fast although the amount of raw materials are decreasing, especially in commersial rattan commodities such as Manau, Irit, Taman, Sega, etc. Their price is quite expensive too five species of rattan were used as research materials. There are Manau (Calamus mettanensis Becc), Toho (Calamus sp), Galang (Daemonorops verticilaris Griff Mart), Hijau (Calamus sp) and simpurut (Calamus panajuga Becc). For finishing materials, clear glass melamine (ML 131 and NC 141) were used in this research with three different immersion timer for 24 hours, 36 hours and 48 hours long. An immersion method without using any finishing materials was done as control materials. Result show that the average of volume expansion of rattan speseis using NC 141 are 1,56-3,16% in Marau; 1,36-2,91%; in Toho; 2,01-3,05% in Galang; 2,12-3,20% in Hijau and 1,90-2,14 in Simpurut. In the other hand, the average of volume expansion of rattan species using melamin ML 131 are 1,27-2,58% in Marau; 1,46-2,51% in Toho; 2,30-3,23% in galang; 1,10-2,79% in Hijau and 1,45-2,55% in Simpurut. In control materials the average of expantion volume in 5 species rattans is 2,53-3,99%. From those results, the best method was shown in using NC 141 which can prevent the volume expansion and give great influence in volume expansion value.Keywords: rattan, finishing material, melamine ML 131, melamine NC 141, volume expantion.
APA, Harvard, Vancouver, ISO, and other styles
7

Coyle, David A. "A method of sampling clast-rich laminated diamictons for magnetic analyses." Canadian Journal of Earth Sciences 26, no. 8 (August 1, 1989): 1654–56. http://dx.doi.org/10.1139/e89-141.

Full text
Abstract:
The sampling of nonlithified diamictons for magnetic analyses (anisotropy of magnetic susceptibility and paleomagnetic remanence) has been restricted to samples that are either massive, clay-rich sediments, or fine-grained ones with very low pebble contents. A new method was developed that produced standard-sized 2 × 2 × 2 cm cubes of sediment from a laminated, clay-poor diamicton from southern Denmark. The sampling procedure did not affect the sample or its magnetic characteristics in any observable manner.
APA, Harvard, Vancouver, ISO, and other styles
8

Sierra-Arguello, Yuli M., Rafaela B. Morgan, Gustavo Perdoncini, Leonardo M. Lima, Marcos José P. Gomes, and Vladimir Pinheiro do Nascimento. "Resistance to β-lactam and tetracycline in Campylobacter spp.isolated from broiler slaughterhouses in southern Brazil." Pesquisa Veterinária Brasileira 35, no. 7 (July 2015): 637–42. http://dx.doi.org/10.1590/s0100-736x2015000700006.

Full text
Abstract:
Abstract The study was carried out to screen and analyze the genetic characteristics of antimicrobial resistance in Campylobacter spp. from poultry sources. A total of 141 strains of Campylobacter isolated from samples of broilers of slaughterhouses in southern Brazil was identified by phenotypic and genotypic methods. Campylobacter isolates were evaluated for its antimicrobial susceptibility and the presence of resistance genes. The strains were investigated for antimicrobial susceptibility against two agents (ampicillin and tetracycline) by disk diffusion method. PCR assay was used to confirm the specie and the presence of ampicillin (blaOXA-61), tetracycline tet(O), and the energy-dependent multi-drug efflux pump (cmeB) genes. Campylobacter jejuni was the most ubiquitous; its presence was determined in 140 samples out of 141 (99.3%), whereas Campylobacter coli was found only in one of the contaminated samples (0.70%). The results obtained showed 65% and 35.5% of Campylobacter isolates resistant to β-lactams and tetracyclines, respectively. The cmeB gene responsible for multidrug resistance was detected in 26 isolates out 141 strains (18.5%). Moreover, 36 out of 141 Campylobacter strains (25.6%) were found to be resistant to at least two different antimicrobia resistance markers (β-lactams and tetracyclines).
APA, Harvard, Vancouver, ISO, and other styles
9

Hunt Gerardo, S., D. M. Citron, M. C. Claros, and E. J. Goldstein. "Comparison of Etest to broth microdilution method for testing Streptococcus pneumoniae susceptibility to levofloxacin and three macrolides." Antimicrobial Agents and Chemotherapy 40, no. 10 (October 1996): 2413–15. http://dx.doi.org/10.1128/aac.40.10.2413.

Full text
Abstract:
When the Etest was compared to broth microdilution for susceptibility testing of Streptococcus pneumoniae, levofloxacin, erythromycin, and penicillin results correlated for both methods; azithromycin and clarithromycin showed discrepancies of > or = 2 dilutions for 95.8% and 31.5% of the isolates, respectively. Levofloxacin was active against 141 of 142 isolates (< or = 2.0 micrograms/ml), making it a potentially useful new fluoroquinolone.
APA, Harvard, Vancouver, ISO, and other styles
10

K. S. Abbiramy, K. S. Abbiramy, and P. Ronald Ross P. Ronald Ross. "Determination of Acute Toxicity of NPK Fertilizers to Eisenia Foetida Using a Simple Paper Contact Method." International Journal of Scientific Research 2, no. 2 (June 1, 2012): 415–17. http://dx.doi.org/10.15373/22778179/feb2013/141.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Method 141"

1

Hendrych, Marek. "Možné chyby návrhu a provedení svarů pro následnou chemickou úpravu mořením." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-443190.

Full text
Abstract:
The diploma thesis deals with the issue of surface treatment by pickling. In the research part the pickling technology is described in detail. The next chapters are focused on the TIG welding method and the weldability of austenitic stainless steels. In the experimental part an experiment is carried out focusing on the comparison of weight loss and surface quality depending on the pickling time. Part of the conclusion is the implementation of pWPS documentation for the specified component and a brief manual for customers of pickling plant.
APA, Harvard, Vancouver, ISO, and other styles
2

Liu, Ran. "Synthesis, characterization and properties of nanostructured materials by template-directed method." ScholarWorks@UNO, 2004. http://louisdl.louislibraries.org/u?/NOD,141.

Full text
Abstract:
Thesis (M.S.)--University of New Orleans, 2004.
Title from electronic submission form. "A thesis ... in partial fulfillment of the requirements for the degree of Master of Science in the Department of Chemistry."--Thesis t.p. Vita. Includes bibliographical references.
APA, Harvard, Vancouver, ISO, and other styles
3

Dodici, Adria Danielle. "The Relationship Between Teachers' Multicultural Attitudes and Their Instructional Practice with English Language Learners: A Mixed Method Study." PDXScholar, 2011. http://pdxscholar.library.pdx.edu/open_access_etds/141.

Full text
Abstract:
Teachers of English language learners (ELLs) are often ill prepared to provide content area instruction tailored to their students' needs. This explanatory mixed method study examined the relationship between 15 ELL teachers' multicultural attitudes and use of sheltered instruction (SI). The purpose of the study was to ascertain whether teachers' multicultural attitudes influenced their use of SI. Data were gathered using a Demographic Questionnaire, Multicultural Efficacy Scale (MES), Classroom Instruction Questionnaire, and semi-structured interviews. A correlational analysis found no statistically significant relationship (i.e., r = -.34; p = .22) between participants' scores on SI observations and the MES. A correlational estimate for the four highest SI scorers indicated a relationship between the two sets of scores (i.e., r = .75; p = .25). Qualitative data did not indicate any patterns that might distinguish the high and low SIOP scorers; however, Aptitude Measurement Interaction may explain the different correlational results.
APA, Harvard, Vancouver, ISO, and other styles
4

Yang, Weixuan. "Temperature-dependent homogenization technique and nanoscale meshfree particle methods." Diss., University of Iowa, 2007. http://ir.uiowa.edu/etd/147.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

MATOS, IZABELA T. de. "Padronização dos radionuclídeos F-18 e In-111 e determinação dos coeficientes de conversão interna total para o In-111 em sistema de coincidência por software." reponame:Repositório Institucional do IPEN, 2014. http://repositorio.ipen.br:8080/xmlui/handle/123456789/10615.

Full text
Abstract:
Made available in DSpace on 2014-10-09T12:42:28Z (GMT). No. of bitstreams: 0
Made available in DSpace on 2014-10-09T14:02:00Z (GMT). No. of bitstreams: 0
Dissertação (Mestrado)
IPEN/D
Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP
APA, Harvard, Vancouver, ISO, and other styles
6

Labron, Timothy. "John 1:14a and Rudolf Bultmann's hermeneutical method." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape11/PQDD_0003/MQ42405.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Hecksén, Alexander. "Distributed Operations : En förmåga eller en metod?" Thesis, Swedish National Defence College, Swedish National Defence College, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:fhs:diva-143.

Full text
Abstract:

Uppsatsen behandlar det amerikanska konceptet Distributed Operations (DO) kopplat mot den svenska doktrinutvecklingen. Uppsatsen bygger på Mika Ihalainens uppsats om DO som en framtida upprorsbekämpningsmetod. Uppsatsen avser fortsätta på Mika Ihalainens uppsats, och då främst med hans egna förslag på vidare forskning. Syftet med uppsatsen är att besvara frågeställningen ”Är Distributed Operations en förmåga eller en metod utifrån hur konceptet nyttjades under Falklandskriget?” och att ge ett konceptexempel på hur den svenska Försvarsmakten kan hantera en lågtek-nologisk fiende samt bidraga till den svenska doktrinutvecklingen, framförallt genom en definition av begreppen förmåga och metod. Ytterligare ett syfte med uppsatsen är att ”öppna upp” för vidare studier kring ämnet. Problemställningen har angripits med en kvalitativ textanalys där den nominella definitionen av begreppen förmåga och metod har väglett författaren genom empirin och slutligen resulterat i ett försöka att avgöra huruvida DO är en förmåga eller me-tod, sett från hur det nyttjades av SAS i Falklandskriget. Empirin har i huvudsak bestått av major Mika Ihalainens och major Brian L. Gilmans (USMC) uppsatser samt ett urval av deras källor. Även svenska ordböcker och doktriner har använts för framtagandet av en nominell definition av de för uppsatsen centrala begreppen. Uppsatsen visar att Distributed Operations bör betraktas som just ett koncept, ett koncept som skapar, binder samman och driver utvecklingen av metoder i syfte att uppnå vissa förmågor.


The essay deals with the American concept of Distributed Operations (DO) and the Swedish development of doctrines. The essay has its origin in major Mika Ihalainens essay on DO as a future method of fighting Small Wars. This essay intends to continue with Mika Ihalainens suggestion for future research and the dual purpose of this essay is to answer the question “Is Distributed Operations a capability or a method as seen from how it was used during the Falklands war?”. It’s second purpose is to describe a concept to the Swedish Armed Forces as an example on how to deal with a low-tech enemy and also to contribute to the Swedish doctrinal development, especially re-garding the definition of the concepts capability and method. Another purpose of this essay is to open up the subject for more widened and thorough studies. This study has been carried out through a qualitative analysis where the definition of capability and method has guided the author through the empiric material and has fi-nally resulted in an attempt to decide whether DO is a capability or a method, based upon how the concept was used by the SAS during the Falklands war. The empiric ma-terial has mainly consisted of major Mika Ihalainens and major Brian L. Gilmans essays and has been complemented with their original sources. The author has also used Swedish dictionaries and doctrines for the production of the nominal definition of the central notions of the essay. The result of the essay is that Distributed Operations should be considered as a con-cept which creates, binds together and forces the development of methods with the purpose to achieve certain capabilities.

APA, Harvard, Vancouver, ISO, and other styles
8

BRITO, ANDREIA B. de. "Determinação da taxa de desintegração de Tc-99m e In-111 em sistemas de coincidências." reponame:Repositório Institucional do IPEN, 2011. http://repositorio.ipen.br:8080/xmlui/handle/123456789/10047.

Full text
Abstract:
Made available in DSpace on 2014-10-09T12:34:11Z (GMT). No. of bitstreams: 0
Made available in DSpace on 2014-10-09T14:06:46Z (GMT). No. of bitstreams: 0
Dissertação (Mestrado)
IPEN/D
Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP
APA, Harvard, Vancouver, ISO, and other styles
9

Daniels, Jason M. "Forensic and Anti-Forensic Techniques for OLE2-Formatted Documents." DigitalCommons@USU, 2008. https://digitalcommons.usu.edu/etd/141.

Full text
Abstract:
Common office documents provide significant opportunity for forensic and anti-forensic work. The Object Linking and Embedding 2 (OLE2) specification used primarily by Microsoft’s Office Suite contains unused or dead space regions that can be over written to hide covert channels of communication. This thesis describes a technique to detect those covert channels and also describes a different method of encoding that lowers the probability of detection. The algorithm developed, called OleDetection, is based on the use of kurtosis and byte frequency distribution statistics to accurately identify OLE2 documents with covert channels. OleDetection is able to correctly identify 99.97 percent of documents with covert channel and only a false positive rate 0.65 percent. The improved encoding scheme encodes the covert channel with patterns found in unmodified dead space regions. This anti-forensic technique allows the covert channel to masquerade as normal data, lowering the ability probability for any detection tool to is able to detect its presence.
APA, Harvard, Vancouver, ISO, and other styles
10

Zhang, Lin. "Generalized finite element method for multiscale analysis." Diss., Texas A&M University, 2003. http://hdl.handle.net/1969.1/1141.

Full text
Abstract:
This dissertation describes a new version of the Generalized Finite Element Method (GFEM), which is well suited for problems set in domains with a large number of internal features (e.g. voids, inclusions, etc.), which are practically impossible to solve using the standard FEM. The main idea is to employ the mesh-based handbook functions which are solutions of boundary value problems in domains extracted from vertex patches of the employed mesh and are pasted into the global approximation by the Partition of Unity Method (PUM). It is shown that the p-version of the Generalized FEM using mesh-based handbook functions is capable of achieving very high accuracy. It is also analyzed that the effect of the main factors affecting the accuracy of the method namely: (a) The data and the buffer included in the handbook domains, and (b) The accuracy of the numerical construction of the handbook functions. The robustness of the method is illustrated by several model problems defined in domains with a large number of closely spaced voids and/or inclusions with various shapes, including the heat conduction problem defined on domains with porous media and/or a real composite material.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Method 141"

1

Ferreri, Doug. Golf swing construction 101: The Bertholy method revisited. West Palm Beach, FL: OTW Pub., 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Alvo, Mayer, and Philip L. H. Yu. Statistical Methods for Ranking Data. New York, NY: Springer New York, 2014. http://dx.doi.org/10.1007/978-1-4939-1471-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Epidemiology 101. Sudbury, Mass: Jones and Bartlett Publishers, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Griffiths, David F., and Desmond J. Higham. Numerical Methods for Ordinary Differential Equations. London: Springer London, 2010. http://dx.doi.org/10.1007/978-0-85729-148-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Shredding 101. Hopkinsville, Kentucky: Loosey Goosey Press, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Sol, H., and C. W. J. Oomens, eds. Material Identification Using Mixed Numerical Experimental Methods. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-009-1471-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Scott, Tipton, ed. Comic books 101: The history, methods and madness. Cincinnati, Ohio: IMPACT Books, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Corazza, Marco, and Claudio Pizzi, eds. Mathematical and Statistical Methods for Actuarial Sciences and Finance. Milano: Springer Milan, 2010. http://dx.doi.org/10.1007/978-88-470-1481-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Association, Reader's Digest, ed. Get fit for free home workouts: Yoga and pilates : 80 step-by-step exercises/140 personalized workouts. Pleasantville, NY: Reader's Digest Association, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Newson, Angie. Get fit for free!: Home workouts : yoga and pilates : 80 step-by-step exercises,140 personalized workouts. Pleasantville, NY: Reader's Digest Association, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Method 141"

1

Griffiths, David F., and Desmond J. Higham. "Euler’s Method." In Numerical Methods for Ordinary Differential Equations, 19–31. London: Springer London, 2010. http://dx.doi.org/10.1007/978-0-85729-148-6_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Calderazzo, Fausto. "1,1 Insertion Reactions." In Inorganic Reactions and Methods, 355–56. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2007. http://dx.doi.org/10.1002/9780470145296.ch245.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Koh, Eunsook T., and Willis L. Owen. "Writing Method Sections." In Introduction to Nutrition and Health Research, 41–56. Boston, MA: Springer US, 2000. http://dx.doi.org/10.1007/978-1-4615-1401-5_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

"Having persevered with the reading of the case and the notations, the differences between this Community case and common law reports is stark. The judges in the ECJ do not use analogy, poetic language, asides, stories, counter arguments. There is a veneer of scientific detachment in the language of the Court. The style is unadorned description, technical language without explanation, assertion, the summarising without comment of a wide range of arguments by the parties, the Advocate General, and the governments wishing to make observations. When the ECJ turns to the decisions it will make, it dismisses arguments without explanation with phrases such as, ‘this is misconceived’, ‘No, this is not right’ and states ‘this is the case’ without giving reasons why. The Court argues deductively without making any attempts to refer to policy. Yet, it must surely be aware of the policy dimensions of its decisions. If it had decided against Van Gend en Loos, then the power of the fledgling Community would have been severely diminished. In the view of the Advocate General, companies would follow the national customs tariffs and not be guided by the provisions of the treaty. The ECJ may well have been taking the opportunity to assert the power of the Community over the individual Member State. This is conjecture in the absence of any comment on policy from the Court itself. Potentially powerful and persuasive arguments were put forward that the ECJ did not have the jurisdiction to hear the case; the Court merely replied that they did have jurisdiction. This was based on the grounds that the meaning behind the question raised an issue of interpretation within its jurisdiction. The Court’s simplistic decision following from this that any arithmetical change, even if it resulted from a re-classification within the existing order rather than a deliberate increase, would constitute an infringement of the treaty—is severe and open to question. In the face of arguments that would concentrate upon the intention of Member States concerning infringement, the ECJ says any arithmetical increase constitutes an infringement irrespective of intention. Indeed, much policy has to be read into all judgments of the ECJ and this judgment is no exception. Perhaps given the tensions between Member States and their creation, the EC, this is a wise and deliberate policy. The Member States gave birth to something that, in many respects, is more powerful and can dictate terms to an individual Member State." In Legal Method and Reasoning, 185. Routledge-Cavendish, 2012. http://dx.doi.org/10.4324/9781843145103-141.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Hasegawa, Jun-ya. "Photobiology and biospectroscopy studied by SAC-CI method." In Recent Progress in Computational Sciences and Engineering (2 vols), 1296. CRC Press, 2006. http://dx.doi.org/10.1201/b12066-141.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Schenk, J., and V. Mikulenka. "Experience made with the GPS undermining impact measurement method." In Mine Planning and Equipment Selection 1997, 743–47. CRC Press, 2020. http://dx.doi.org/10.1201/9781003078166-141.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Souza, G. F. M., I. S. Melo, and M. A. C. Michalski. "Applying Mahalanobis-Taguchi method to detect faults in rotating machinery." In Safety and Reliability – Safe Societies in a Changing World, 1115–23. CRC Press, 2018. http://dx.doi.org/10.1201/9781351174664-141.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Blahova, Marta, Vaclav Mach, Ondrej Zimek, and Milan Adamek. "Method of Device Diagnostics, Operating Status Logging and Configuration Changes." In DAAAM Proceedings, 1014–18. DAAAM International Vienna, 2019. http://dx.doi.org/10.2507/30th.daaam.proceedings.141.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Yonghua, Su, He Manchao, and Jing Haihe. "Analysis method of stability probability for underground engineering in platy structure rock-mass." In Frontiers of Rock Mechanics and Sustainable Development in the 21st Century, 601–4. CRC Press, 2020. http://dx.doi.org/10.1201/9781003077510-141.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Olivia, M., and H. Nikraz. "Corrosion performance of embedded steel in fly ash geopolymer concrete by impressed voltage method." In Incorporating Sustainable Practice in Mechanics and Structures of Materials, 781–86. CRC Press, 2010. http://dx.doi.org/10.1201/b10571-141.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Method 141"

1

Li*, Shuqin, Shiqian Luo, Libin Cao, Hong Liu, and Guangmin He. "Fold calculation method of offset VSP using stack imaging theory." In SPG/SEG 2016 International Geophysical Conference, Beijing, China, 20-22 April 2016. Society of Exploration Geophysicists and Society of Petroleum Geophysicists, 2016. http://dx.doi.org/10.1190/igcbeijing2016-141.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Rakhit, A. K. "A Realistic Method to Establish the Required Gearbox Rating for a Gas Turbine Application." In ASME 1995 International Gas Turbine and Aeroengine Congress and Exposition. American Society of Mechanical Engineers, 1995. http://dx.doi.org/10.1115/95-gt-141.

Full text
Abstract:
A reliable gearbox rating is essential for successful operation of high speed gas turbines. Presently, there is no dependable method to establish such a rating based on actual gas turbine performance under operating conditions. A great majority of manufacturers of this equipment use gas turbine output power at inlet air temperature of −20°F as the basis for this rating, while others assume an arbitrary inlet air temperature profile for turbine operation and use turbine output powers at various temperatures of the profile to derive an average rating for the gearbox. The major drawbacks of these methods are that they do not consider the effects of turbine performance characteristics and also do not include temperature profiles of actual installation sites. Thus, a vast majority of gear transmission equipment used in today’s high speed turbomachinery applications are either under- or over-rated. The procedure, as outlined in this paper, provides a reliable method to rate gearboxes for gas turbine driven equipment.
APA, Harvard, Vancouver, ISO, and other styles
3

Junk, Stefan, and Henning Einloth. "New Method for the Application of Voxels in Product Design for Multi-Material 3D-Printing." In CAD'20. CAD Solutions LLC, 2020. http://dx.doi.org/10.14733/cadconfp.2020.137-141.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Foulcher, Thomas, and Samuel Doyle. "PG93 COVID19 Pandemic – the use of instant messaging apps as a novel education method." In Abstracts of the ASPiH 2020 Virtual Conference, 10–11 November 2020. The Association for Simulated Practice in Healthcare, 2020. http://dx.doi.org/10.1136/bmjstel-2020-aspihconf.141.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Wang, Zairan, Weiming Li, Yueying Kao, Dongqing Zou, Qiang Wang, Minsu Ahn, and Sunghoon Hong. "HCR-Net: A Hybrid of Classification and Regression Network for Object Pose Estimation." In Twenty-Seventh International Joint Conference on Artificial Intelligence {IJCAI-18}. California: International Joint Conferences on Artificial Intelligence Organization, 2018. http://dx.doi.org/10.24963/ijcai.2018/141.

Full text
Abstract:
Object pose estimation from a single image is a fundamental and challenging problem in computer vision and robotics. Generally, current methods treat pose estimation as a classification or a regression problem. However, regression based methods usually suffer from the issue of imbalanced training data, while classification methods are difficult to discriminate nearby poses. In this paper, a hybrid CNN model, which we call it HCR-Net that integrates both a classification network and a regression network, is proposed to deal with these issues. Our model is inspired by that regression methods can get better accuracy on homogeneously distributed datasets while classification methods are more effective for coarse quantization of the poses even if the dataset is not well balanced. The classification methods and the regression methods essentially complement each other. Thus we integrate both them into a neural network in a hybrid fashion and train it end-to-end with two novel loss functions. As a result, our method surpass the state-of-the-art methods, even with imbalanced training data and much less data augmentation. The experimental results on the challenging Pascal3D+ database demonstrate that our method outperforms the state-of-the-arts significantly, achieving improvements on ACC and AVP metrics up to 4% and 6%, respectively.
APA, Harvard, Vancouver, ISO, and other styles
6

Minghetti, P., UM Musazzi, F. Selmin, GM Khalid, S. Franzé, and F. Cilurzo. "3PC-060 Hot-melt ram extrusion 3D printing: a smart method for compounding orodispersible films in hospital pharmacies." In 24th EAHP Congress, 27th–29th March 2019, Barcelona, Spain. British Medical Journal Publishing Group, 2019. http://dx.doi.org/10.1136/ejhpharm-2019-eahpconf.141.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Feiereisen, John M., Matthew D. Montgomery, and Sanford Fleeter. "Unsteady Aerodynamic Forcing Functions: A Comparison Between Linear Theory and Experiment." In ASME 1993 International Gas Turbine and Aeroengine Congress and Exposition. American Society of Mechanical Engineers, 1993. http://dx.doi.org/10.1115/93-gt-141.

Full text
Abstract:
The unsteady flow field generated by rotating rows of perforated plates and airfoil cascades are mathematically split into vortical and potential components using two methods, one relying entirely on velocity data and the other utilizing both velocity and unsteady static pressure data. The propagation and decay of these split flow perturbations are then examined and compared to linear theory predictions. The perforated plate gusts closely resemble linear theory vortical gusts. Both splitting methods indicate that they are dominantly vortical gusts with insignificant unsteady static pressure perturbations. The airfoil gusts resemble linear theory combined vortical and potential gusts. The recombined airfoil gusts using the vortical and potential components calculated by the method using only unsteady velocity data do not necessarily resemble the measured gusts, nor do they behave axially as predicted by linear theory. The recombined airfoil gusts using the linear theory components calculated by the method using both unsteady velocity and unsteady static pressure data do resemble the measured gusts and behave axially as predicted by linear theory, with the vortical component propagating unattenuated and the potential component decaying at the rate predicted by linear theory.
APA, Harvard, Vancouver, ISO, and other styles
8

Zekert, F., A. Hufnagl, A. Hufnagl, and M. A. A. Kratzer. "FIRST EXPERIENCE WITH A NEW SYSTEM TO MEASURE PRIMARY HEMOSTASIS IN VITRO." In XIth International Congress on Thrombosis and Haemostasis. Schattauer GmbH, 1987. http://dx.doi.org/10.1055/s-0038-1643078.

Full text
Abstract:
Control of hemostatic parameters of patients undergoing surgery usually involves only determination of parameters of the coagulation cascade, but not measurement of primary hemostasis. This has mainly methodological reasons. Recently a model of primary hemostasis has been introduced (Kratzer & Bom, Haemostasis 15:357; 1985) now produced under the name “ Thrombostat 4000” (VDG von der Goltz, 8221 Seeon, West Germany). This device measures computerized within minutes “ in vitro” bleeding parameters (vBP) like bleeding volume (V,ul), time (T,sec) and the viscosity depending initial flow (IF,ul/min) in a small sample (0.5-lml) of whole anticoagulated blood (Na citrate 1 to 10). The clinical relevance of the vBP was tested in patients undergoing major surgery.Results : Case 1: A 78 years old woman with osteomyelosarcoma, heavy bleeding and normal coagulation parametrs showed strongly pathological vBP: (V > 800, T > 300, IF 184); control values: (V = 177, T = 105, IF = 145); An improvement of beeding and shortening of vBP was observed after infusion of platelet concentrate: (V = 328, T = 245, IF = 147).Case 2: A 60 years old man with adenocarcinoma undergoing liver transplantation, before operation (OP) vBP: (V = 224, T = 114, IF = 182); displayed a strong increase during OP: (V > 800, T = 360, IF = 277; decreasing values after Oft (V = 348, T = 146, IF = 254); 1. day after OP: (V = 250, T = 127, IF = 221); 13 day after OP normal vBft (V = 160, T = 111, IF 182).Case 3: A 35 years old man with III. grade burnings of the skin (35%) and a massive platelet function defect: (V > 800, T > 180, IF = 328); improvement after infusion of platelet concentrate: (V = 393, T = 164, IF = 239); further improvement some hours later: (V = 240, T = 120, IF = 213); and normalizing of parameters at the 1. day: (V = 197, T = 126, IF = 186) and the 5. day after OP: (V = 130, T = 122, IF = 142).It is interesting to note that patients with heavy burnings reguarly displayed reduced vBP: (V = 120, T = 70, IF = 127) if measured very early after the accident. The new method seems to be a valuable instrument to judge platelet functions.
APA, Harvard, Vancouver, ISO, and other styles
9

Mankbadi, R. R., and S. Mikhail. "A Study of a Turbine-Generator System for Low-Head Hydropower." In ASME 1985 International Gas Turbine Conference and Exhibit. American Society of Mechanical Engineers, 1985. http://dx.doi.org/10.1115/85-gt-141.

Full text
Abstract:
A method is outlined for determining the optimum operating conditions of a turbine-generator unit installed across a low-head irrigation structure for electrical power generation. For a given regulator’s characteristic, the unit’s rated power and design parameters are determined such that its cost-benefit ratio is minimum. The economical feasibility of the microhydro plant is studied by comparing its life-time cost to its life-time benefit. The benefit is determined by the cost of the corresponding energy generated through a diesel-driven generator set. The microhydro plant was found to be economically feasible over a wide range of inflation and interest rates.
APA, Harvard, Vancouver, ISO, and other styles
10

Bechtel, G. S., R. L. McKnight, and T. S. Cook. "TMFSLAM-Design Analysis Tool for Coated Structures." In ASME 1991 International Gas Turbine and Aeroengine Congress and Exposition. American Society of Mechanical Engineers, 1991. http://dx.doi.org/10.1115/91-gt-141.

Full text
Abstract:
Hot flowpath components in aircraft gas turbine engines are subject to a severe operating environment. The large thermal gradients can produce high thermal strains which, when combined with mechanical loads and a deleterious environment, can lead to premature failure. To combat this possibility, designers spend considerable time determining the stress and strain fields in these components as the parts undergo typical operating histories. These field quantities can then be used to determine failure parameters and determine life limiting locations. The field determinations can be difficult and, in combination with numerous potential failure mechanisms, the structural assurance process can take a considerable time to complete. To shorten this process, a personal computer (PC) based preliminary design system has been developed. This system, called Thermomechanical Fatigue – Structural Life Assessment Method (TMFSLAM), permits the user to rapidly evaluate the interactive effects of duty cycle, geometry, and materials on component life. The quantitative results determined by TMFSLAM will be available to make decisions on design changes, material substitution, etc.
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Method 141"

1

Kuhn, D., C. Wells, J. Armitage, K. Cusick, and S. Garcia. A Description of the Systems Engineering Capability Maturity Model Appraisal Method Version 1.1. Fort Belvoir, VA: Defense Technical Information Center, March 1996. http://dx.doi.org/10.21236/ada310235.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Peacock, Richard D., Walter W. Jones, Richard W. Bukowski, and C. Lynn Forney. Software user's guide for the HAZARD I fire hazard assessment method: version 1.1. Gaithersburg, MD: National Institute of Standards and Technology, 1991. http://dx.doi.org/10.6028/nist.hb.146v1-1991.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Peacock, Richard D., Walter W. Jones, Richard W. Bukowski, and C. Lynn Forney. Software user's guide for the HAZARD I fire hazard assessment method: version 1.1. Gaithersburg, MD: National Institute of Standards and Technology, 1991. http://dx.doi.org/10.6028/nist.hb.146v2-1991.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Barbour, Rick, Melanie Benhoff, Brian Gallagher, Suellen Eslinger, and Thomas Bernard. Standard CMMI Appraisal Method for Process Improvement (SCAMPI), Version 1.1: Method Implementation Guidance for Government Source Selection and Contract Process Monitoring. Fort Belvoir, VA: Defense Technical Information Center, September 2002. http://dx.doi.org/10.21236/ada408309.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Shafii, B., R. W. Atcher, and E. R. DeSombre. An improved and facile method for the synthesis of 1,1-bis(4-hydroxyphenyl)-2-phenylethylene and its derivatives. Office of Scientific and Technical Information (OSTI), October 1994. http://dx.doi.org/10.2172/10188496.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Tsui, Benjamin M. Corrective In-111 Capromab Pendetide SPECT Image Reconstruction Methods for Improved Detection of Recurrent Prostate Cancer. Fort Belvoir, VA: Defense Technical Information Center, March 2005. http://dx.doi.org/10.21236/ada438429.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Tsui, Benjamin M. Corrective 111 In Capromab Pendetide SPECT Image Reconstruction Methods for Improved Detection of Recurrent Prostate Cancer. Fort Belvoir, VA: Defense Technical Information Center, June 2006. http://dx.doi.org/10.21236/ada462023.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Liljegren, L. M. Similarity analysis applied to the design of scaled tests of hydraulic mitigation methods for Tank 241-SY-101. Office of Scientific and Technical Information (OSTI), February 1993. http://dx.doi.org/10.2172/6555923.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Liljegren, L. M. Similarity analysis applied to the design of scaled tests of hydraulic mitigation methods for Tank 241-SY-101. Office of Scientific and Technical Information (OSTI), February 1993. http://dx.doi.org/10.2172/10127628.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Wright, Kirsten. Collecting Plant Phenology Data In Imperiled Oregon White Oak Ecosystems: Analysis and Recommendations for Metro. Portland State University, March 2020. http://dx.doi.org/10.15760/mem.64.

Full text
Abstract:
Highly imperiled Oregon white oak ecosystems are a regional conservation priority of numerous organizations, including Oregon Metro, a regional government serving over one million people in the Portland area. Previously dominant systems in the Pacific Northwest, upland prairie and oak woodlands are now experiencing significant threat, with only 2% remaining in the Willamette Valley in small fragments (Hulse et al. 2002). These fragments are of high conservation value because of the rich biodiversity they support, including rare and endemic species, such as Delphinium leucophaeum (Oregon Department of Agriculture, 2020). Since 2010, Metro scientists and volunteers have collected phenology data on approximately 140 species of forbs and graminoids in regional oak prairie and woodlands. Phenology is the study of life-stage events in plants and animals, such as budbreak and senescence in flowering plants, and widely acknowledged as a sensitive indicator of environmental change (Parmesan 2007). Indeed, shifts in plant phenology have been observed over the last few decades as a result of climate change (Parmesan 2006). In oak systems, these changes have profound implications for plant community composition and diversity, as well as trophic interactions and general ecosystem function (Willis 2008). While the original intent of Metro’s phenology data-collection was to track long-term phenology trends, limitations in data collection methods have made such analysis difficult. Rather, these data are currently used to inform seasonal management decisions on Metro properties, such as when to collect seed for propagation and when to spray herbicide to control invasive species. Metro is now interested in fine-tuning their data-collection methods to better capture long-term phenology trends to guide future conservation strategies. Addressing the regional and global conservation issues of our time will require unprecedented collaboration. Phenology data collected on Metro properties is not only an important asset for Metro’s conservation plan, but holds potential to support broader research on a larger scale. As a leader in urban conservation, Metro is poised to make a meaningful scientific contribution by sharing phenology data with regional and national organizations. Data-sharing will benefit the common goal of conservation and create avenues for collaboration with other scientists and conservation practitioners (Rosemartin 2013). In order to support Metro’s ongoing conservation efforts in Oregon white oak systems, I have implemented a three-part master’s project. Part one of the project examines Metro’s previously collected phenology data, providing descriptive statistics and assessing the strengths and weaknesses of the methods by which the data were collected. Part two makes recommendations for improving future phenology data-collection methods, and includes recommendations for datasharing with regional and national organizations. Part three is a collection of scientific vouchers documenting key plant species in varying phases of phenology for Metro’s teaching herbarium. The purpose of these vouchers is to provide a visual tool for Metro staff and volunteers who rely on plant identification to carry out aspects of their job in plant conservation. Each component of this project addresses specific aspects of Metro’s conservation program, from day-to-day management concerns to long-term scientific inquiry.
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Method 141' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography