Academic literature on the topic 'Methane activation chemistry'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Methane activation chemistry.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Methane activation chemistry"

1

Sharma, Richa, Hilde Poelman, Guy B. Marin, and Vladimir V. Galvita. "Approaches for Selective Oxidation of Methane to Methanol." Catalysts 10, no. 2 (February 6, 2020): 194. http://dx.doi.org/10.3390/catal10020194.

Full text
Abstract:
Methane activation chemistry, despite being widely reported in literature, remains to date a subject of debate. The challenges in this reaction are not limited to methane activation but extend to stabilization of the intermediate species. The low C-H dissociation energy of intermediates vs. reactants leads to CO2 formation. For selective oxidation, nature presents methane monooxygenase as a benchmark. This enzyme selectively consumes methane by breaking it down into methanol. To assemble an active site similar to monooxygenase, the literature reports Cu-ZSM-5, Fe-ZSM-5, and Cu-MOR, using zeolites and systems like CeO2/Cu2O/Cu. However, the trade-off between methane activation and methanol selectivity remains a challenge. Density functional theory (DFT) calculations and spectroscopic studies indicate catalyst reducibility, oxygen mobility, and water as co-feed as primary factors that can assist in enabling higher selectivity. The use of chemical looping can further improve selectivity. However, in all systems, improvements in productivity per cycle are required in order to meet the economical/industrial standards.
APA, Harvard, Vancouver, ISO, and other styles
2

Schwarz, Helmut. "Activation of Methane." Angewandte Chemie International Edition in English 30, no. 7 (July 1991): 820–21. http://dx.doi.org/10.1002/anie.199108201.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Choudhary, Tushar V., Erhan Aksoylu, and D. Wayne Goodman. "Nonoxidative Activation of Methane." Catalysis Reviews 45, no. 1 (January 5, 2003): 151–203. http://dx.doi.org/10.1081/cr-120017010.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Sherry, Alan E., and Bradford B. Wayland. "Metalloradical activation of methane." Journal of the American Chemical Society 112, no. 3 (January 1990): 1259–61. http://dx.doi.org/10.1021/ja00159a064.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Yu, Yue, Zhixiang Xi, Bingjie Zhou, Binbo Jiang, Zuwei Liao, Yao Yang, Jingdai Wang, Zhengliang Huang, Jingyuan Sun, and Yongrong Yang. "Enhancing Methane Conversion by Modification of Zn States in Co-Reaction of MTA." Catalysts 11, no. 12 (December 17, 2021): 1540. http://dx.doi.org/10.3390/catal11121540.

Full text
Abstract:
Limited by harsh reaction conditions, the activation and utilization of methane were regarded as holy grail reaction. Co-reaction with methanol, successfully realizing mild conversion below 450 °C, provides practical strategies for methane conversion on metal-loaded ZSM-5 zeolites, especially for highly efficient Zn loaded ones. However, Zn species, regarded as active acid sites on the zeolite, have not been sufficiently studied. In this paper, Zn-loaded ZSM-5 zeolite was prepared, and Zn was modified by capacity, loading strategy, and treating atmosphere. Apparent methane conversion achieves 15.3% for 1.0Zn/Z-H2 (16.8% as calculated net conversion) with a significantly reduced loading of 1.0 wt.% against deactivation, which is among the best within related zeolite materials. Besides, compared to the MTA reaction, the addition of methane promotes the high-valued aromatic production from 49.4% to 54.8%, and inhibits the C10+ production from 7.8% to 3.6%. Notably, Zn2+ is found to be another active site different from the reported ZnOH+. Medium strong acid sites are proved to be beneficial for methane activation. This work provides suggestions for the modification of the Zn active site, in order to prepare highly efficient catalysts for methane activation and BTX production in co-reaction with methanol.
APA, Harvard, Vancouver, ISO, and other styles
6

Baerns, M. "Workshop on basic research opportunities in methane activation chemistry." Applied Catalysis 18, no. 1 (September 1985): 211–12. http://dx.doi.org/10.1016/s0166-9834(00)80330-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Meyet, Jordan, Mark A. Newton, Jeroen A. van Bokhoven, and Christophe Copéret. "Molecular Approach to Generate Cu(II) Sites on Silica for the Selective Partial Oxidation of Methane." CHIMIA International Journal for Chemistry 74, no. 4 (April 29, 2020): 237–40. http://dx.doi.org/10.2533/chimia.2020.237.

Full text
Abstract:
The selective partial oxidation of methane to methanol remains a great challenge in the field of catalysis. Cu-exchanged zeolites are promising materials, directly and selectively converting methane to methanol with high yield under cyclic conditions. However, the economic viability of these aluminosilicate materials for potential industrial applications remains a challenge. Exploring copper supported on non-microporous oxide supports and rationalising the structure/reactivity relationships extends the scope of material investigation and opens new possibilities. Recently, copper on alumina was demonstrated to be active and selective for the partial oxidation of methane. This work aims to explore the formation of well-defined Cu(II) oxo species on silica via surface organometallic chemistry and examines their reactivity for the selective transformation of methane to methanol. Isolated Cu(II) sites were generated via grafting of a tailored molecular precursor. Activation under oxidative conditions and subsequent removal of organic moieties from the grafted copper centres led to the formation of small copper (II) oxide clusters, which are active in the partial oxidation of methane under mild conditions, albeit significantly less efficient than the corresponding isolated Cu(II) sites on alumina.
APA, Harvard, Vancouver, ISO, and other styles
8

Butschke, Burkhard, Maria Schlangen, Helmut Schwarz, and Detlef Schröder. "C–H Bond Activation ofMethane with Gaseous [(CH3)Pt(L)]+ Complexes (L = Pyridine, Bipyridine, and Phenanthroline)." Zeitschrift für Naturforschung B 62, no. 3 (March 1, 2007): 309–13. http://dx.doi.org/10.1515/znb-2007-0302.

Full text
Abstract:
Electrospray ionization of solutions of dimethyl(1,5-cyclooctadiene)platinum(II) in methanol with traces of nitrogen-containing ligands L provides gaseous complexes of the type [(CH3)Pt(L)]+ with L = pyridine (py), 2,2′-bipyridine (bipy), and 1,10-phenanthroline (phen). These [(CH3)Pt(L)]+ cations are capable of activating the C-H bond in methane as shown by H/D exchange when using CD4 as a neutral reactant. Most reactive is the complex [(CH3)Pt(py)]+ bearing a monodentate nitrogen ligand. The cationic complexes [(CH3)Pt(bipy)]+ and [(CH3)Pt(phen)]+ also bring about activation of methane, though at a lower rate, whereas the bipyridine complex [(CH3)Pt(py)2]+ does not react with methane at thermal conditions. A detailed analysis of the experimental data by means of kinetic modeling provides insight into the underlying mechanistic steps, but a distinction whether the reaction occurs as σ bond metathesis or via an oxidative addition cannot be made on the basis of the experimental data available.
APA, Harvard, Vancouver, ISO, and other styles
9

Tian, Yudong, Lingyu Piao, and Xiaobo Chen. "Research progress on the photocatalytic activation of methane to methanol." Green Chemistry 23, no. 10 (2021): 3526–41. http://dx.doi.org/10.1039/d1gc00658d.

Full text
Abstract:
This review presents the recent progress of the photocatalytic conversion of CH4 to CH3OH from four aspects: photocatalysts, oxidants, sacrificial reagents, and CH4 activation mechanisms, along with its current status and existing challenges.
APA, Harvard, Vancouver, ISO, and other styles
10

Cui, Weihong, X. Peter Zhang, and Bradford B. Wayland. "Bimetallo-Radical Carbon−Hydrogen Bond Activation of Methanol and Methane." Journal of the American Chemical Society 125, no. 17 (April 2003): 4994–95. http://dx.doi.org/10.1021/ja034494m.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Methane activation chemistry"

1

Brimacombe, Lyn M. "Activation of methane on supported metal catalysts." Thesis, University of Ottawa (Canada), 1991. http://hdl.handle.net/10393/7805.

Full text
Abstract:
In order to obtain more information required for the catalytic conversion of methane, the interaction of methane and ethylene with various supported metal catalysts was investigated. The metals used were Ni, Fe, Co, Mo, Ru, Rh, Pd, Re, Ir, and Pt, all supported on $\rm Al\sb2O\sb3.$ Silica supported nickel was also used. The technique of temperature programmed reaction was mainly used. This method gives temperatures at which the adsorption and/or the reaction of a gas starts to occur. The present results showed wide differences in the interaction of methane or ethylene with each catalyst. The isothermal reaction of methane was also carried out in order to further investigate the behaviour of the CH$\sb{\rm n}$ species which were formed upon the chemisorption of methane. As a process for converting methane to higher hydrocarbons, the catalytic coupling of methane with ethylene (CH$\sb4$ + $\rm C\sb2H\sb4\to C\sb3H\sb8$) was examined by using the catalysts listed above. At 250 and 350$\sp\circ$C, no propane was produced on any of the catalysts, except for alumina supported platinum. A trace of propane was found in this case for the reaction at 250$\sp\circ$C. The results were discussed based on the interaction of the reactants with these metals as revealed by the temperature programmed reactions.
APA, Harvard, Vancouver, ISO, and other styles
2

Loader, Peter Kelvin. "An investigation of the activation of methane on heterogeneous catalysts." Thesis, University of Reading, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.359396.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kopp, Daniel Arthur. "Mechanistic studies of electron transfer, complex formation, C-H bond activation, and product binding in soluble methane monooxygenase." Thesis, Massachusetts Institute of Technology, 2003. http://hdl.handle.net/1721.1/16915.

Full text
Abstract:
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Chemistry, 2003.
Vita.
Includes bibliographical references.
This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.
Chapter 1. Soluble Methane Monooxygenase: Activation of Dioxygen and Methane The mechanisms by which soluble methane monooxygenase uses dioxygen to convert methane selectively to methanol have come into sharp focus. Diverse techniques have clarified subtle details about each step in the reaction, from binding and activating dioxygen, to hydroxylation of alkanes and other substrates, to the electron transfer events required to complete the catalytic cycle. Chapter 2. Electron Transfer Reactions of the Reductase Component of Soluble Methane Monooxygenase from Methylococcus capsulatus (Bath) Soluble methane monooxygenase (sMMO) catalyzes the hydroxylation of methane by dioxygen to afford methanol and water, the first step of carbon assimilation in methanotrophic bacteria. This enzyme comprises three protein components: a hydroxylase (MMOH) that contains a dinuclear non-heme iron active site, a reductase (MMOR) that facilitates electron transfer from NADH to the diiron site of MMOH, and a coupling protein (MMOB). MMOR uses a non-covalently bound FAD cofactor and a [2Fe-2S] cluster to mediate electron transfer. The gene encoding MMOR was cloned from Methylococcus capsulatus (Bath) and expressed in Escherichia coli in high yield. Purified recombinant MMOR was indistinguishable from the native protein in all aspects examined, including activity, mass, cofactor content, and EPR spectrum of the [2Fe-2S] cluster. Redox potentials for the FAD and [2Fe-2S] cofactors, determined by reductive titrations in the presence of indicator dyes ...
(cont.) The midpoint potentials of MMOR are not altered by the addition of MMOH, MMOB, or both MMOH and MMOB. The reaction of MMOR with NADH was investigated by stopped-flow UV-visible spectroscopy, and the kinetic and spectral properties of intermediates are described. The effects of pH on the redox properties of MMOR are described and exploited in pH jump kinetic studies to measure the rate constant of 130 +/- s-1 for electron transfer between the FAD and [2Fe-2S] cofactors in two-electron reduced MMOR. The thermodynamic and kinetic parameters determined significantly extend our understanding of the sMMO system. Chapter 3. Structural Features of the MMOH/MMOR Complex as Revealed by Mass Spectrometric Analysis of Covalently Cross-linked Proteins. Soluble methane monooxygenase requires complexes between its three component proteins for efficient catalytic turnover. The hydroxylase (MMOH) must bind both to the reductase (MMOR) for electron transfer and to the regulatory protein (MMOB) to allow reaction with substrates. Although structures of MMOH, MMOB, and one domain of MMOR have been determined, little is known about structures of the complexes. Proteins cross-linked by a carbodiimide reagent were analyzed by specific proteolysis and capillary HPLC-mass spectrometry. Tandem mass spectra conclusively identified two amine-to-carboxylate cross-linked sites involving the alpha subunit of MMOH and the [2Fe-2S] domain of MMOR (MMOR-Fd). The amino terminus of the MMOH alpha subunit cross-links to the side chains of MMOR-Fd residues Glu56 and Glu91. These Glu residues are close to one another on the surface of MMOR-Fd and far from the [2Fe-2S] cluster ...
by Daniel A. Kopp.
Ph.D.
APA, Harvard, Vancouver, ISO, and other styles
4

Yu, Jenwei Roscoe. "Methane activation over molybdenum disulfide, molybdenum carbide, and silver(110). Molecular orbital theory." Case Western Reserve University School of Graduate Studies / OhioLINK, 1990. http://rave.ohiolink.edu/etdc/view?acc_num=case1059138320.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Pahls, Dale R. "Pathways for C—H Activation and Functionalization by Group 9 Metals." Thesis, University of North Texas, 2015. https://digital.library.unt.edu/ark:/67531/metadc801909/.

Full text
Abstract:
As fossil fuel resources become more and more scarce, attention has been turned to alternative sources of fuels and energy. One promising prospect is the conversion of methane (natural gas) to methanol, which requires an initial activation of a C-H bond and subsequent formation of a C-O bond. The most well studied methodologies for both C-H activation and C-O bond formation involve oxidation of the metal center. Metal complexes with facile access to oxidation states separated by four charge units, required for two subsequent oxidations, are rare. Non-oxidative methods to perform C-H bond activation or C-O bond formation must be pursued in order for methane to methanol to become a viable strategy. In this dissertation studies on redox and non-redox methods for both C-H activation and C-O bond formation are discussed. In the early chapters C-O bond formation in the form of reductive functionalization is modeled. Polypyridine ligated rhodium complexes were studied computationally to determine the properties that would promote reductive functionalization. These principles were then tested by designing an experimental complex that could form C-O bonds. This complex was then shown to also work in acidic media, a critical aspect for product stabilization. In the later chapters, non-oxidative C-H activation is discussed with Ir complexes. Both sigma bond metathesis and concerted metalation deprotonation were investigated. For the former, the mechanism for an experimentally known complex was elucidated and for the latter the controlling factors for a proposed catalyst were explored.
APA, Harvard, Vancouver, ISO, and other styles
6

Jen, Shu-Fen. "Oxidation and reduction of carbon monoxide and methane carbon-hydrogen bond activation: Molecular orbital theory." Case Western Reserve University School of Graduate Studies / OhioLINK, 1991. http://rave.ohiolink.edu/etdc/view?acc_num=case1056129369.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Najafian, Ahmad. "Activation of Small Molecules by Transition Metal Complexes via Computational Methods." Thesis, University of North Texas, 2020. https://digital.library.unt.edu/ark:/67531/metadc1703353/.

Full text
Abstract:
The first study project is based on modeling Earth abundant 3d transition-metal methoxide complexes with potentially redox-noninnocent ligands for methane C–H bond activation to form methanol (LnM-OMe + CH4 → LnM–Me + CH3OH). Three types of complex consisting of tridentate pincer terpyridine-like ligands, and different first-row transition metals (M = Ti, V, Cr, Mn, Fe, Co, Ni, and Cu) were modeled to elucidate the reaction mechanism as well as the effect of the metal identity on the thermodynamics and kinetics of a methane activation reaction. The calculations showed that the d electron count of the metal is a more significant factor than the metal's formal charge in controlling the thermodynamics and kinetics of C–H activation. These researches suggest that late 3d-metal methoxide complexes that favor σ-bond metathesis pathways for methane activation will yield lower barriers for C–H activation, and are more profitable catalyst for future studies. Second, subsequently, on the basis of the first project, density functional theory is used to analyze methane C−H activation by neutral and cationic nickel-methoxide complexes. This study identifies strategies to further lower the barriers for methane C−H activation through evaluation of supporting ligand modifications, solvent polarity, overall charge of complex, metal identity and counterion effects. Overall, neutral low coordinate complexes (e.g. bipyridine) are calculated to have lower activation barriers than the cationic complexes. For both neutral and cationic complexes, the methane C−H activation proceed via a σ-bond metathesis rather than an oxidative addition/reductive elimination pathway. Neutralizing the cationic catalyst models by a counterion, BF4-, has a considerable impact on reducing the methane activation barrier free energy. Third, theoretical studies were performed to explore the effects of appended s-block metal ion crown ethers upon the redox properties of nitridomanganese(V) salen complexes, [(salen)MnV(N)(Mn+-crown ether)]n+, where, M = Na+, K+, Ba2+, Sr2+ for 1Na, 1K, 1Ba, 1Sr complexes respectively; A = complex without Mn+-crown ether and B = without Mn+). The results of the calculations reveal that ΔGrxn(e ̶ ) and thus reduction potentials are quite sensitive to the point charge (q) of the s-block metal ions. Methane activation by A, 1K and 1Ba complexes proceeds via a hydrogen atom abstraction (HAA) pathway with reasonable barriers for all complexes with ~ 4 kcal/mol difference in energy, more favorable free energy barrier for the complexes with higher point charge of metal ion. Changes in predicted properties as a function of continuum solvent dielectric constant suggest that the primary effect of the appended s-block ion is via "through space" interactions. Finally, a comprehensive DFT study of the electrocatalytic oxidation of ammonia to dinitrogen by a ruthenium polypyridyl complex, [(tpy)(bpy)RuII(NH3)]2+ (complex a), and its NMe2-substituted derivative (b), is presented. The thermodynamics and kinetics of electron (ET) and proton transfer (PT) steps and transition states are calculated. NMe2 substitution on bpy reduces the ET steps on average 8 kcal/mol for complex b as compared to a. The calculations indicate that N–N formation occurs by ammonia nucleophilic attack/H-transfer via a nitrene intermediate, rather than a nitride intermediate. Comparison of the free energy profiles of Ru-b with its first-row Fe congener reveals that the thermodynamics are less favorable for the Fe-b model, especially for ET steps. The N-H bond dissociation free energies (BDFEs) for NH3 to form N2 show the following trend: Ru-b
APA, Harvard, Vancouver, ISO, and other styles
8

Grinenval, Éva. "Chimie organométallique de surface sur hétéropolyacides anhydres de type Keggin : application en catalyse." Thesis, Lyon 1, 2009. http://www.theses.fr/2009LYO10184.

Full text
Abstract:
L’objectif de ce travail de thèse était la préparation et la caractérisation des hétéropolyanions anhydres sur supports oxydes par la stratégie de chimie organométallique de surface. Les acides anhydres H3PMo12O40 et H3PW12O40 ont été préparés sur silice partiellement déshydroxylée. Cette réaction conduit à une interaction ionique par protonation des silanols de surface. La réactivité de ces hétéropolyacides anhydres en présence d’alkylsilanes a été étudiée en milieu homogène et a conduit à la formation d’espèces silylées cationiques [Et2MeSi+]3[HPA3-] et au dégagement d’hydrogène. Cette réactivité a ensuite été appliquée en milieu hétérogène en fonctionnalisant la surface de la silice par des groupements [(≡SiO)SiMe2H] et a conduit à la formation d’une espèce de surface polyoxometalate liée de manière covalente au support. L’introduction de fonction chloroalkylsilane à la surface de la silice [(≡SiO)SiMeCl2] et [(≡SiO)2SiMeCl] a également permis de former des liaisons covalentes Si Support-O-M HPA. Par ailleurs, Par ailleurs, l’activation du méthane a été observée sur tous les solides HPA/SiO2 à travers le dégagement de CO2, H2O, H2. L’activation C-H a lieu sur ces systèmes même à basse température et les données obtenues suggèrent la formation d’une espèce méthoxy de surface par réaction des protons acides avec le méthane
The aim of this work was the preparation and characterization of anhydrous heteropolyanions on oxide supports using surface organometallic chemistry approach. Anhydrous H3PMo12O40 and H3PW12O40 were prepared on partially dehydroxylated silica. This reaction led to an ionic interaction by protonation of surface silanols. The reactivity of these heteropoly compounds with alkylsilanes was studied in homogeneous conditions and led to the formation of cationic silicon species [Et2MeSi+]3[HPA3-] and release of hydrogen. This reactivity was then applied in heterogeneous conditions by introduction of silane groups [(≡SiO)SiMe2H] at the silica surface and led to the formation of a surface polyoxometalate species covalently bonded to the support. The introduction of chloroalkylsilane groups [(≡SiO)SiMeCl2] and [(≡SiO)2SiMeCl] has also enabled the formation of covalent bonds Si Support-O-M HPA. In addition, methane activation was observed on all HPA/SiO2 solids through the releases of CO2, H2O, H2. The C-H activation takes place on these systems even at low temperature and obtained data suggest the formation of a methoxy surface species by reaction of stronf acidic protons with methane
APA, Harvard, Vancouver, ISO, and other styles
9

Zaher, Hasna. "The activation of small molecules using frustrated Lewis pairs." Thesis, University of Oxford, 2012. http://ora.ox.ac.uk/objects/uuid:82848f03-2269-4e76-9b01-d89a6d22cd71.

Full text
Abstract:
This thesis describes the activation of small molecules using frustrated Lewis pairs, in particular investigating their use to reduce CO₂ to methanol, thus producing a new route towards a renewable fuel. Chapter One summarises the requirement for a renewable fuel source, the alternative methods currently available and previous research conducted into converting CO₂ to methanol using FLPs and other reducing agents. Chapter Two describes the synthesis of a new family of electron-deficient tris(aryl)boranes, B(C₆F₅)3-x(C₆Cl₅)x (x = 1-3), allowing the electronic effects, resulting from the gradual replacement of C₆F₅ with C₆Cl₅ ligands, to be studied. The novel Lewis acids have been fully characterised and their Lewis acidities have been determined using NMR spectroscopy, electrochemistry and DFT studies. Chapter Three discusses the synthesis of nine novel FLPs and their use to successfully split H2. Each borohydride salt has been spectroscopically fully characterised and five of the salts have been characterised using single crystal X-ray diffraction. To determine the exact positions of the H atoms, single crystal neutron diffraction and DFT experiments were carried out on [1-H][H-TMP]. Chapter Four details attempts to use the borohydride salts, synthesised in Chapter Three, to reduce CO₂ to methanol. Each experiment was been fully investigated and their catalytic viability was determined. The X-ray crystal structure of [1-OCHO][H-TMP] is described and each formatoborate and methoxyborate salt were fully characterised. Chapter Five describes experimental procedures and characterisation data.
APA, Harvard, Vancouver, ISO, and other styles
10

Kumar, Rahul. "Mechanistic Insights Into Small Molecule (Amine-Boranes, Hydrogen, Methane, Formic Acid Carbon dioxide) Activation Using Electrophilic Ru(II)-Complexes." Thesis, 2016. http://etd.iisc.ernet.in/handle/2005/2744.

Full text
Abstract:
Current fossil fuels (Coal and Petroleum) based economy is not sustainable in the long run because of its dwindling resources, and increasing concerns of climate change due to excessive carbon dioxide (CO2) emission. To mitigate CO2 emission and climate change, scientists across the world have been looking for clean and sustainable energy sources. Among them hydrogen gas (H2) could be more promising because it is the most clean fuel and can be produced from cheap source (water) which is renewable and abundant. Nevertheless, the bottleneck for hydrogen economy is lying in the cost of hydrogen production from water. Still there are no any efficient systems developed which can deliver hydrogen from water in economically viable way. Meanwhile, recent research on old molecule ammonia-borane (H3N•BH3, AB) as hydrogen source has increased the hope towards the hydrogen economy, however, catalytic recycling (or efficient regeneration) of AB from the dehydrogenated product polyborazylene (PB or BNHx) is the biggest hurdle which prevents use of AB as practical hydrogen storage material. Therefore, it is imperative to understand the dehydrogenation pathways of ammonia-borane (or related amine-boranes) which lead to polymeric or oligomeric product(s). On the other hand, methane (CH4) is abundant (mostly untamed) but cleaner fuel than its higher hydrocarbon analogs. To develop highly efficient catalytic systems to transform CH4 into methanol (gas to liquid) is of paramount importance in the field of catalysis and it could revolutionize the petrochemical industry. Therefore, to activate CH4, it is crucial to understand its binding interaction with metal center of a molecular catalyst under homogenous condition. However, these interactions are too weak and hence σ–methane complexes are very elusive. In this context, σ-H2 and σ-borane complexes bear some similarities in σ-bond coordination (and four coordinated boranes are isoelectronic with methane) could be considered as good models to study σ-methane complexes. Studying the H−H and B−H bond activation in H2 and amine-boranes, respectively, would provide fundamental insights into methane activation and its subsequent functionalization. Moreover, the proposed methanol economy by Nobel laureate George Olah seems more promising because methanol can be produced from CH4 (CO2 as well). This in turn will gradually reduce the amount of two powerful greenhouse gases from the earth’s atmosphere. Thus, efficient and economic production of methanol from CH4 and CO2 is one of most challenging problems of today in the field of catalysis and regarded as the holy grails. Furthermore, very recently formic acid (HCOOH) is envisaged as a promising reversible hydrogen storage material because it releases H2 and CO2 in the presence of a suitable and efficient catalyst or vice versa under ambient conditions. Objective of the research work: Taking the account of the above facts, the research work in this thesis is mostly confined to utilize electrophilic Ru(II)-complexes for activation of small molecules such as ammonia-borane (H3N•BH3) [and related amine-borane (Me2HN•BH3)], hydrogen (H2), methane (CH4), formic acid (HCOOH) and carbon dioxide (CO2) and investigation of their mechanistic pathways using NMR spectroscopy under homogeneous conditions. Though these molecules are small, they have huge impacts on chemical industries (energy sector and chemical synthesis: drugs/natural products) and environment [CO2 and CH4 are potent green house gases] as well. However, they are relatively inert molecules, especially CH4 and CO2, and impose very tough challenges to activate and functionalize them into useful products under ambient conditions. The partial oxidation of the strong C−H bond in CH4 for its transformation into methanol under relatively mild condition using an organometallic catalyst is considered as a holy grail in the field of catalysis which is mentioned earlier. More importantly, to develop better and highly efficient homogeneous catalytic systems for the activation of these molecules, it is imperative to understand the mechanistic pathways using well defined homogeneous metal complexes. Thus, an understanding of the interaction of these inert molecules with metal center is obligatory. In this context, discovery of a σ-complex of H2 gave remarkable insights into H−H bond activation pathways and its implications in catalytic hydrogenation reactions. Subsequently, σ-borane complexes of amine-boranes were discovered and found to be relatively more stable because of stronger M−H−B interaction and hence act as good models to study the M−H−C interaction of elusive σ-methane complex. On the other hand, HCOOH, a promising hydrogen storage material and its efficient catalytic dehydrogenation/decarboxylation and CO2 hydrogenation back to HCOOH using well defined homogeneous catalysts could lead to a sustainable energy cycle. Therefore, it is quite significant to understand the mechanistic pathways of formic acid dehydrogenation/decarboxylation and carbon dioxide reduction to formic acid for the development of next generation efficient catalysts. Chapter highlights: Keeping all these in view, we carried out thorough studies on the activation of these small molecules by electrophilic Ru(II)-complexes. This thesis provides useful insights and perspective on the detailed investigation of mechanistic pathways for the activation of small molecules such as H3N•BH3 [and Me2HN•BH3], H2, CH4, HCOOH and CO2 using electrophilic Ru(II)-complexes under homogeneous conditions using NMR spectroscopy. In Chapter 1 we provide brief overview of small molecule activation using organometallic complexes. This chapter presents pertinent and latest results from literature on the significance of small molecule activation. Although there are several small molecules which need our attention, however, we have focused mainly on H3N•BH3 [and Me2HN•BH3], H2, CH4, HCOOH and CO2. In Chapter 2, we present detailed investigation of mechanistic pathways of B−H bond activation of H3N•BH3 and Me2HN•BH3 using electrophilic [RuCl(dppe)2][OTf] complex using NMR spectroscopy as a model for methane activation. In these reactions, using variable temperature (VT) 1H, 31P{1H} and 11B NMR spectroscopy we detected several intermediates en route to the final products at room temperature including a σ-borane complex. On the basis of elaborative studies using NMR spectroscopy, we have established the complete mechanistic pathways for dehydrogenation of H3N•BH3/Me2HN•BH3 and formation of B−H bond activated/cleaved products along with several Ru-hydride and Ru-(dihydrogen) complexes. Keeping the B−H bond activation of amine-boranes in view as a model for methane activation, we attempted to activate methane using [RuCl(dppe)2][OTf] complex. In addition, [Ru(OTf)(dppe)2][OTf] complex having better electrophilicity than [RuCl(dppe)2][OTf], was synthesized and characterized. The [Ru(OTf)(dppe)2][OTf] complex has highly labile triflate bound to Ru-metal and therefore its reactivity studies toward H2 and CH4 were carried out where H2 activation was successfully achieved, however, no any spectroscopic evidence was found for C−H bond activation of CH4. The Chapter 3 describes the synthesis and characterization of several Ru-Me complexes such as trans-[Ru(Me)Cl(dppe)2], [Ru(Me)(dppe)2][OTf], trans-[Ru(Me)(L)(dppe)2][OTf] (L = CH3CN, tBuNC, tBuCN, H2) with an aim to trap corresponding σ-methane intermediate at low temperature. However, interestingly, we observed spontaneous but gradual methane elimination and orthometalation of [Ru(Me)(dppe)2][OTf] complex at room temperature. We thoroughly investigated mechanistic details of methane elimination and orthometalation of [Ru(Me)(dppe)2][OTf] using VT NMR spectroscopy, NOESY and DFT calculations. Furthermore, H2 activation was confirmed unambiguously by [Ru(Me)(dppe)2][OTf] and Ru-orthometalated complexes using NMR spectroscopy under ambient conditions. An effort was also made to activate methane using Ruorthometalated complex in pressurized condition of methane in a pressure stable NMR tube. Moreover, preliminary studies on protonation reaction of [Ru(Me)(dppe)2][OTf] using VT NMR spectroscopy to trap σ-methane at low temperature was carried out which provided us some useful information on dynamics between proton and Ru-Me species. The Chapter 4 provides useful insights into the mechanistic pathways of dehydrogenation/decarboxylation of formic acid using [RuCl(dppe)2][OTf]. Catalytic dehydrogenation of HCOOH using [RuCl(dppe)2][OTf] was observed in presence of Hunig base (proton sponge). In addition, a complex [Ru(CF3COO)(dppe)2][OTf] was synthesized and characterized using NMR spectroscopy, and found to readily dehydrogenate HCOOH. Moreover, preliminary results on transfer hydrogenation of CO2 into formamide using [RuCl(dppe)2][OTf] as a precatalyst and tert-butyl amine-borane (tBuH2N•BH3) as secondary hydrogen source was confirmed using 13C NMR spectroscopy. The mechanisms were proposed for HCOOH dehydrogenation and transfer hydrogenation of CO2 based on our NMR spectroscopic studies. Furthermore, a few test reactions of transfer hydrogenation of selected alkenes such as cyclooctene, acrylonitrile, 1-hexene using [RuCl(dppe)2][OTf] as pre-catalyst and tert-butyl amine-borane (tBuH2N•BH3) as secondary hydrogen source showed quantitative conversion to hydrogenated products.
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Methane activation chemistry"

1

begum, Pakiza, and Ramesh c. deka. "A comparative theoretical investigation on the activation of C-H bond in methane on mono and bimetallic Pd and Pt subnanoclusters." In Computational Chemistry Methodology in Structural Biology and Materials Sciences, 243–58. Toronto; New Jersey: Apple Academic Press, 2017.: Apple Academic Press, 2017. http://dx.doi.org/10.1201/9781315207544-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Arndt, S., and R. Schomäcker. "Methane Activation." In Reference Module in Chemistry, Molecular Sciences and Chemical Engineering. Elsevier, 2014. http://dx.doi.org/10.1016/b978-0-12-409547-2.10948-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Hoffmann, Roald, and Pierre Laszlo. "Protean." In Roald Hoffmann on the Philosophy, Art, and Science of Chemistry. Oxford University Press, 2012. http://dx.doi.org/10.1093/oso/9780199755905.003.0015.

Full text
Abstract:
Science often advances upon willful transgression of a seeming interdiction. Examples which leap to a chemist’s mind are noble gas compounds, strained hydrocarbons such as tetrahedranes, activation (by organometallics) of even methane, and, to mention just one brilliant, more recent achievement, inclusion of an allene within the confines of a six-membered ring while preventing its conversion into a benzenoid. Such feats put all the cunning of a scientist into coaxing and, yes, coercing the system at hand to obey instructions from one’s daring imagination. As always, it is hard. Not for nothing is our playroom called a laboratory. And when the task is done and the time arrives to convey to others (who might not be privy to the anguish of the work) all that struggle and the majesty of the achievement, the scientist quite naturally lapses into metaphor. One such, founded in male 19th century language as much as in history, is some more or less prurient variant of “Unveiling the Secrets of Nature.” Another, evoking the thorny, twisted path to understanding and the long hours of toil in the laboratory, is “Wrestling with Nature.” The latter metaphor has been central to experimental science at least since the Elizabethan Age, and is the subject of this small essay. While the roots of the metaphor lie in Greek myth, it makes a striking debut in a seminal brief for experiment in science. This arresting phrase also marks a bifurcation in the way science is viewed by nonscientists, even—and especially so—in our day. The proof text here is that of Francis Bacon (1561–1626), in his 1605 Of the Advancement of Learning. Bacon writes: . . . For like a man’s disposition is never well known till he be crossed, nor Proteus ever changed shapes till he was straitened and held fast; so the passages and variations of nature cannot appear so fully in the liberty of nature, as in the trials and vexations of art. . . . He repeats the imagery in his remarkable 1620 Novum Organum. Bacon’s 1620 book was a clarion call to replace what passed as Aristotelian reasoning about the world with experiment.
APA, Harvard, Vancouver, ISO, and other styles
4

Chizoo, Esonye. "Alkali Homogeneous Catalyzed Methyl Ester Synthesis from Chrysophyllum albidum Seed Oil: An Irreversible Consecutive Mechanism Approach." In Alkaline Chemistry and Applications. IntechOpen, 2022. http://dx.doi.org/10.5772/intechopen.95519.

Full text
Abstract:
This chapter considers the application of alkaline (NaOH) based catalyzed methanolysis of seed oil from Chrysophyllum albidum (African star apple) as a viable route for synthesis of methyl esters (biodiesel). Specific consideration was given to the chemical kinetics and thermodynamics of the irreversible consecutive mechanism of the process on the basis of higher application of methanol/molar ratio (>3:1) as a feasible approach for generating required data for commercial scale-up of the process. The application of power rate law revealed that second order model was the best fitted model on the 328 K, 333 K and 338 K temperature and 0–100 min ranges studied. Rate constants of the glyceride hydrolysis were 0.00710, 0.00870 and 0.00910 wt% min−1 for the triglyceride (TG), 0.02390, 0.03040 and 0.03210 wt% min−1 for the diglycerides (DG) and 0.01600, 0.03710 and 0.04090 wt% min−1 for the monoglycerides (MG) at the above respective temperatures. The activation energies were 2.707, 7.30 and 23.33 kcal/mol respectively. TG hydrolysis to DG was the rate determining step. Rates of reactions were found to increase with increase temperature and mixing rate (200, 400 and 800 rpm). No optimal mixing rate was detected and the highest mixing rate of 800 rpm was the most favorable in the mixing range under investigation. The possible reason for the absence of lag period is formation of methyl esters, which acted as a solvent for the reactants, and consequently, made the reaction mixture a homogeneous single phase. The quality of the produced methyl esters were found to compare with international standards. All the results lead to more diverse and novel applications of the seed oil in biodiesel productions.
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Methane activation chemistry"

1

Mehdi, Ghazanfar, Maria Grazia De Giorgi, Donato Fontanarosa, Sara Bonuso, and Antonio Ficarella. "Ozone Production With Plasma Discharge: Comparisons Between Activated Air and Activated Fuel/Air Mixture." In ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/gt2021-60167.

Full text
Abstract:
Abstract This study focused on the comparative analysis about the production of ozone and active radicals in presence of nanopulsed plasma discharge on air and on fuel/air mixture to investigate its effect on combustion enhancement. This analysis is based on numerical modeling of air and methane/air plasma discharge with different repetition rates (100 Hz, 1000 Hz and 10000 Hz). To this purpose, a two-step approach has been proposed based on two different chemistry solvers: a 0-D plasma chemistry solver (ZDPlasKin toolbox) and a combustion chemistry solver (CHEMKIN software suite). Consequently, a comprehensive chemical kinetic scheme was generated including both plasma excitation reactions and gas phase reactions. Validation of air and methane/air mechanisms was performed with experimental data. Kinetic models of both air and methane/air provides good fitting with experimental data of O atom generation and decay process. ZDPlasKin results were introduced in CHEMKIN in order to analyze combustion enhancement. It was found that the concentrations of O3 and O atom in air are higher than the methane/air activation. However, during the air activation peak concentration of ozone was significantly increased with repetition rates and maximum was observed at 10000 Hz. Furthermore, ignition timings and flammability limits were also improved with air and methane/air activation but the impact of methane/air activation was comparatively higher.
APA, Harvard, Vancouver, ISO, and other styles
2

Pashkov, V. V., D. V. Golinsky, N. V. Vinichenko, and A. S. Belyi. "Non-oxidative activation of methane under a pulsed mode in the presence of supported platinum-containing catalysts." In 21ST CENTURY: CHEMISTRY TO LIFE. AIP Publishing, 2019. http://dx.doi.org/10.1063/1.5122940.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Holton, M. M., P. Gokulakrishnan, M. S. Klassen, R. J. Roby, and G. S. Jackson. "Autoignition Delay Time Measurements of Methane, Ethane, and Propane Pure Fuels and Methane-Based Fuel Blends." In ASME Turbo Expo 2009: Power for Land, Sea, and Air. ASMEDC, 2009. http://dx.doi.org/10.1115/gt2009-59309.

Full text
Abstract:
Autoignition delay experiments in air have been performed in an atmospheric flow reactor using typical natural gas components, namely methane, ethane and propane. Autoignition delay measurements were also made for binary fuel mixtures of methane/ethane and methane/propane and ternary mixtures of methane/ethane/propane. The effect of CO2 addition to the methane-based fuel blends on autoignition delay times was also investigated. Equivalence ratios for the experiments ranged between 0.5 and 1.25 and temperatures ranged from 930 K to 1140 K. Consistent with past studies, increasing equivalence ratio and increasing inlet temperatures over these ranges decreased autoignition delay times. Furthermore, addition of 5–10% ethane or propane decreased autoignition delay time of the binary methane-based fuel by 30–50%. Further addition of either ethane or propane showed less significant reduction of autoignition delays. Addition of 5–10% CO2 slightly decreased the autoignition delay times of methane fuel mixtures. Arrhenius correlations were used to derive activation energies for the ignition of the pure fuels and their mixtures. Results show a reduction in activation energies at the higher temperatures studied, which suggests a change in ignition chemistry at very high temperatures. Measurements show relatively good agreement with predictions from a detailed kinetics mechanism specifically developed to model ignition chemistry of C1-C3 alkanes.
APA, Harvard, Vancouver, ISO, and other styles
4

Peswani, Mohnish, and Brian McN Maxwell. "Performance of a Generic 4-Step Global Reaction Mechanism With Equilibrium Effects for Detonation Applications." In ASME 2020 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/imece2020-23786.

Full text
Abstract:
Abstract A reduced 4-species, 4-step Global Reaction Mechanism (GRM) [1], derived from detailed chemistry using a thermochemical approach, is investigated for three different reactive mixtures. The trade-off between preciseness of Elementary Reaction Mechanisms (ERMs), and low computational overhead requirements of GRMs remains a dilemma in the application of chemical kinetic models to detonation problems. Reducing a reaction mechanism often compromises the chemical details, and reduces the scope of applicability of the derived model. This is largely due to the mixture chemistry having a vital influence on several key aspects of the detonation phenomenon like initiation, quenching, and the dynamics of the wave front and hydrodynamic structure during propagation. For detonation problems in particular, there has been an insufficient replication of the complex reality of the phenomenon through numerical simulations which has lead to a constant demand for more accurate and affordable models. Three separate stoichiometric combustion mixtures are investigated, each involving acetylene, methane, or propane mixed with oxygen. Each mixture exhibits very different global activation energies, heat release, and ignition characteristics.
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!