Log in

Relevant bibliographies by topics / Metallurgy ; Engineering Materials / Journal articles

To see the other types of publications on this topic, follow the link: Metallurgy ; Engineering Materials.

Journal articles on the topic 'Metallurgy ; Engineering Materials'

Author: Grafiati

Published: 4 June 2021

Last updated: 17 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Metallurgy ; Engineering Materials.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Readey, D. W. "Specific Materials Science and Engineering Education." MRS Bulletin 12, no. 4 (June 1987): 30–33. http://dx.doi.org/10.1557/s0883769400067762.

Full text

Abstract:

Forty years ago there were essentially no academic departments with titles of “Materials Science” or “Materials Engineering.” There were, of course, many materials departments. They were called “Metallurgy,” “Metallurgical Engineering,” “Mining and Metallurgy,” and other permutations and combinations. There were also a small number of “Ceramic” or “Ceramic Engineering” departments. Essentially none included “polymers.” Over the years titles have evolved via a route that frequently followed “Mining and Metallurgy,” to “Metallurgical Engineering,” to “Materials Science and Metallurgical Engineering,” and finally to “Materials Science and Engineering.” The evolution was driven by recognition of the commonality of material structure-property correlations and the concomitant broadening of faculty interests to include other materials. However, the issue is not department titles but whether a single degree option in materials science and engineering best serves the needs of students.Few proponents of materials science and engineering dispute the necessity for understanding the relationships between processing (including synthesis), structure, and properties (including performance) of materials. However, can a single BS degree in materials science and engineering provide the background in these relationships for all materials and satisfy the entire market now served by several different materials degrees?The issue is not whether “Materials Science and Engineering” departments or some other academic grouping of individuals with common interests should or should not exist.

APA, Harvard, Vancouver, ISO, and other styles

2

Cohen, Morris. "Metallurgy and the evolution of materials science and engineering." Bulletin of the Japan Institute of Metals 27, no. 3 (1988): 151–57. http://dx.doi.org/10.2320/materia1962.27.151.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Flemings, Merton C. "Why materials science and engineering is good for metallurgy." Metallurgical and Materials Transactions B 32, no. 2 (April 2001): 197–204. http://dx.doi.org/10.1007/s11663-001-0043-5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Flemings, Merton C. "Why materials science and engineering is good for metallurgy." Metallurgical and Materials Transactions A 32, no. 4 (April 2001): 853–60. http://dx.doi.org/10.1007/s11661-001-0343-z.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Ilyushchanka, A. Ph, A. K. Kryvanos, Ya Ya Piatsiushyk, V. A. Osipov, and S. G. Baray. "Materials and technologies of powder metallurgy in components of aviation and space engineering." Proceedings of the National Academy of Sciences of Belarus, Physical-Technical Series 65, no. 3 (October 21, 2020): 272–84. http://dx.doi.org/10.29235/1561-8358-2020-65-3-272-284.

Full text

Abstract:

Examples of the implementation of powder metallurgy methods and their individual elements in the processes of producing materials with special properties and products thereof are considered. The possibility is shown and the results of producing radar-absorbing and radar-transparent materials in the form of solid bodies and coatings are evaluated. The addition of technological transitions, traditional for powder metallurgy, providing in general the production of radar-transparent materials, with the processes of mechanically activated synthesis and mechanically activated self-propagating high-temperature synthesis at the stages of preparing powders for molding, makes it possible to make the transition to the production of radar-absorbing materials. The high efficiency of both has been confirmed experimentally. The transition from a single-component composition of the initial charge mixture through the formation of the phase composition of the material due to the inclusion of powder components into the mixed charge, the composition and crystal structure of which remain unchanged at all stages of its preparation, to the synthesis of the required phase composition due to the interaction of powder components at one of the stages of technological conversion makes it possible to synthesize, for example, silicon carbide ceramics directly in practically useful products, particularly, substrates of optical mirrors for remote sensing of the Earth. The technological operations developed in powder metallurgy have become a background for the production of energy-saturated heterogeneous composite materials. Actively developing additive technologies, as a relatively new branch of powder metallurgy, expands its capabilities practically boundless.

APA, Harvard, Vancouver, ISO, and other styles

6

Lawley, Alan, and Thomas F. Murphy. "Metallography of powder metallurgy materials." Materials Characterization 51, no. 5 (December 2003): 315–27. http://dx.doi.org/10.1016/j.matchar.2004.01.006.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Abraham, Sunday, Rick Bodnar, Justin Raines, and Yufeng Wang. "Inclusion engineering and metallurgy of calcium treatment." Journal of Iron and Steel Research International 25, no. 2 (February 2018): 133–45. http://dx.doi.org/10.1007/s42243-018-0017-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Kunanbaeva, Kymbat, Saule Rahimova, and Andrey Pigurin. "The role of metallurgical clusters in the development of environmental engineering: new opportunities." E3S Web of Conferences 164 (2020): 01031. http://dx.doi.org/10.1051/e3sconf/202016401031.

Full text

Abstract:

This paper discusses the place and role of metallurgical clusters in the development of environmental engineering. The paper is based on research materials on the development of environmental engineering and the features of the functioning of metallurgical clusters. The paper studies the development of ferrous metallurgy, development trends, and developmental features of city-forming organizations of ferrous metallurgy. The main existing areas for development of metallurgical clusters and the relevance of environmental engineering development are shown.

APA, Harvard, Vancouver, ISO, and other styles

9

Wolfenden, A., and Leon-Salamanca. "Nondestructive Testing (Metallurgy and Materials Science)." Journal of Testing and Evaluation 18, no. 4 (1990): 305. http://dx.doi.org/10.1520/jte12489j.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Demopoulos, G. P. "From extractive metallurgy to materials engineering: personal teaching and research perspective." Canadian Metallurgical Quarterly 54, no. 2 (November 3, 2014): 129–35. http://dx.doi.org/10.1179/1879139514y.0000000171.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Chen, Katherine C., and Vilupanur A. Ravi. "Physical metallurgy: Providing unifying principles in diverse areas of materials engineering." JOM 55, no. 5 (May 2003): 23. http://dx.doi.org/10.1007/s11837-003-0240-6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

AMS, Editorial. "Rewievers, except the members of Editorial Boards, in year 2016." Acta Metallurgica Slovaca 23, no. 1 (March 28, 2017): 93. http://dx.doi.org/10.12776/ams.v23i1.847.

Full text

Abstract:

<p>Dana BARICOVÁ, Faculty of Metallurgy, Technical University of Kosice, Slovakia</p><p>Jaroslav BRIANČIN, Slovak Academy of Sciences, Kosice, Slovak</p><p>Anh-Hoa BUI, School of Materials Sciecen and Engineering, Hanoi University of Technology, Viet Nam</p><p>Branislav BUĽKO, Faculty of Metallurgy, Technical University of Kosice, Slovakia</p><p>Martin ČERNÍK, US Steel, Kosice, Slovakia</p><p>Rakesh K. DHAKA, US Steel, Research and Technology Center, Pittsburg, USA</p><p>Ladislav FALAT, Institute of Materials Research, Slovak Academy of Sciences, Kosice, Slovakia</p><p>Martin FUJDA, Faculty of Metallurgy, Technical University of Kosice, Slovakia</p><p>Anna GUZANOVÁ, Faculty of Mechanical Engineering, Technical University of Kosice, Slovakia</p><p>Mária HAGAROVÁ, Faculty of Metallurgy, Technical University of Kosice, Slovakia</p><p>Mária HEŽELOVÁ, Faculty of Metallurgy, Technical University of Kosice, Slovakia</p><p>Pavol HVIZDOŠ, Institute of Materials Research, Slovak Academy of Sciences, Kosice, Slovakia</p><p>Ľuboš KAŠČÁK, Faculty of Mechanical Engineering, Technical University of Kosice, Slovakia</p><p>Ján KIZEK, Faculty of Metallurgy, Technical University of Kosice, Slovakia</p><p>Róbert KOČIŠKO, Faculty of Metallurgy, Technical University of Kosice, Slovakia</p><p>Andrea KOVAČOVÁ, Faculty of Metallurgy, Technical University of Kosice, Slovakia</p><p>Vladimir KOVAL, Institute of Materials Research, Slovak Academy of Sciences, Kosice, Slovakia</p><p>František LOFAJ, Institute of Materials Research, Slovak Academy of Sciences, Kosice, Slovakia</p><p>Pavol MAREK, Consultant, Kosice, Slovakia</p><p>Jan SAS, Institute for Technical Physics, Karlsruhe Institute of Technology, Germany</p><p>Andrzej TRYTEK, Politechnika Rzeszowska, Rzeszow, Poland</p>

APA, Harvard, Vancouver, ISO, and other styles

13

Michalcová, Alena, Dalibor Vojtěch, Tomáš František Kubatík, Pavel Novák, and Petr Dvořák. "Structural Description of Powder Metallurgy Prepared Materials." Manufacturing Technology 14, no. 3 (October 1, 2014): 359–62. http://dx.doi.org/10.21062/ujep/x.2014/a/1213-2489/mt/14/3/359.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Robinson, M. "STRAIN GAGE MATERIALS PROCESSING, METALLURGY, AND MANUFACTURE." Experimental Techniques 30, no. 1 (February 2, 2006): 42–46. http://dx.doi.org/10.1111/j.1747-1567.2006.00013.x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Sedlaříková, Marie, Jan Hrabovský, Milan Růžička, and Pavel Čudek. "Materials for Biodegradable Implants Prepared by Powder Metallurgy." ECS Transactions 95, no. 1 (November 18, 2019): 437–48. http://dx.doi.org/10.1149/09501.0437ecst.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Ortega-Jimenez, Cesar Humberto, Giovany David Luque Andino, Walter Alfonso Amador Segura, Gerardo Efraín Villalobos Andino, Carlos Eduardo Díaz Pavón, Selvin Alejandro Baca Valladares, Herbert Daniel Chavarría Donaire, Luis Fernando Chandias Flores, and Carlos Humberto Aguilar Padilla. "Systematic Review of Powder Metallurgy: Current Overview of Manufactured Materials and Challenges for Future Research." Materials Science Forum 1015 (November 2020): 36–42. http://dx.doi.org/10.4028/www.scientific.net/msf.1015.36.

Full text

Abstract:

The journey toward foundry and the increasing implementation of Powder Metallurgy are evoking replacing traditional Sand Casting, thus, creating new challenges and opportunities. To take advantage of these opportunities and deal with the challenges, we must gain a holistic understanding of the emerging technical interactions and apply new approaches and methods when introducing new technologies and designing Powder Metallurgy. In this paper, we present the findings of a systematic literature review, consisting of quantitative and qualitative data, focusing on investigating Powder Metallurgy, as an alternative to traditional Sand Casting, by comparing certain characteristics of either process to synthesize the existing information of each method and to present an overview of manufactured materials. Although results indicate an increasing current trend in research publications, showing Powder Metallurgy with many advantages over traditional casting, the latter continues to be implemented as the preferred option in industries with low-level casting production. Given that the studies indicate greater advances in Powder Metallurgy methods over traditional casting, we identified the need for more research on the former under different contexts and therefore recommend it as an approach for future studies of metal casting. This review both reorganizes the available knowledge on Powder Metallurgy, as well as it makes an important methodological contribution by applying a review in Materials science, where there is little to no systematic research, which often means failure to provide sufficient help to implement Powder Metallurgy. Based on these findings, we point to future research needs, highlighting the need for further empirical evidence and improved collaboration between the topics of Mechanical Engineering, Manufacturing Processes, and Materials science, as well as with practitioners.

APA, Harvard, Vancouver, ISO, and other styles

17

Bettles, Colleen J. "Magnesium Powder Metallurgy: Process and Materials Opportunities." Journal of Materials Engineering and Performance 17, no. 3 (February 22, 2008): 297–301. http://dx.doi.org/10.1007/s11665-008-9201-0.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Haasen, Peter, and J. M. Galligan. "Physical Metallurgy." Journal of Engineering Materials and Technology 109, no. 2 (April 1, 1987): 176. http://dx.doi.org/10.1115/1.3225960.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Guo, Zhong Quan, Hao Ran Geng, and Bao Chuan Sun. "Copper-Based Electronic Materials Prepared by SPS and their Properties." Advanced Materials Research 97-101 (March 2010): 1730–35. http://dx.doi.org/10.4028/www.scientific.net/amr.97-101.1730.

Full text

Abstract:

Copper-based electrical contact materials were prepared by Spark Plasma Sintering (SPS) method and powder metallurgy with the addition of different proportions of rare earth (RE) element. It is found that SPS method greatly enhances the density, hardness and conductivity of the composite materials, thus improving their comprehensive properties. Compared with powder metallurgy, SPS boasts a shorter sintering time, smaller compression force and higher efficiency. RE has considerable influence on the comprehensive properties of copper-based electrical contact materials. When the content of RE lower than 0.1%, the comprehensive properties can be improved by increasing RE.

APA, Harvard, Vancouver, ISO, and other styles

20

Abdrakhimov, V. Z., A. K. Kairakbaev, and E. S. Abdrakhimova. "The Use in the Production of Clinker Waste of Non-Ferrous Metallurgy and Power Engineering of East Kazakhstan." Ecology and Industry of Russia 24, no. 3 (March 4, 2020): 14–18. http://dx.doi.org/10.18412/1816-0395-2020-3-14-18.

Full text

Abstract:

The technology of obtaining clinker bricks on the basis of waste of non-ferrous metallurgy – clay part of the "tails" of the gravity of zircon-ilmenite ores and waste of energy – ash of light fraction is considered. The use of non-ferrous metallurgy and energy waste in ceramics contributes to the disposal of industrial waste, environmental protection and the expansion of the raw material base for ceramic building materials.

APA, Harvard, Vancouver, ISO, and other styles

21

Zelechower, Michal, Pawel Zieba, and Clive Walker. "Introduction." Microscopy and Microanalysis 9, no. 4 (August 2003): 336. http://dx.doi.org/10.1017/s1431927603030307.

Full text

Abstract:

This issue of Microscopy and Microanalysis contains selected papers from the fifth Regional Workshop of the European Microbeam Analysis Society (EMAS) on Electron Probe Microanalysis—Practical Aspects that took place May 22–25, 2002 at Szczyrk, Poland. The meeting was organized by the Polish National Branch of EMAS in collaboration with the Silesian University of Technology (Faculty of Materials Engineering and Metallurgy) and the Polish Academy of Science (Institute of Metallurgy and Materials Science).

APA, Harvard, Vancouver, ISO, and other styles

22

Watanabe, Ryuzo, and Akira Kawasaki. "Development of Functionally Gradient Materials via Powder Metallurgy." Journal of the Japan Society of Powder and Powder Metallurgy 39, no. 4 (1992): 279–86. http://dx.doi.org/10.2497/jjspm.39.279.

Full text

APA, Harvard, Vancouver, ISO, and other styles

23

Peng, Zhiwei, Zhizhong Li, Xiaolong Lin, Mengshen Yang, Jiann-Yang Hwang, Yuanbo Zhang, Guanghui Li, and Tao Jiang. "Microwave Power Absorption in Materials for Ferrous Metallurgy." JOM 69, no. 2 (November 14, 2016): 178–83. http://dx.doi.org/10.1007/s11837-016-2174-9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

24

Ball, Philip. "Stellar metallurgy." Nature Materials 13, no. 5 (April 22, 2014): 431. http://dx.doi.org/10.1038/nmat3954.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

Predein, Valery, Artyom Popov, Oleg Komarov, and Sergey Zhilin. "Integrated processing of ferriferous materials in blank production for mechanical engineering facilities." E3S Web of Conferences 192 (2020): 02009. http://dx.doi.org/10.1051/e3sconf/202019202009.

Full text

Abstract:

The paper considers the possibility of reducing the use of crude ore for metal product by using aluminothermy, which facilitates effective integrated processing of metal waste generated by engineering and metallurgy facilities in the form of mill scale, ferrous and non-ferrous metal swarf with simultaneous castings production. The paper studies the impact patterns of thermite components ratios on the parameters of extracting chemical elements from the source components, metal phase output and its chemical composition. The possible applications for experimental alloys resulting from controlled exothermic reactions are determined for supplying castings and melting stock to blank production for mechanical engineering facilities.

APA, Harvard, Vancouver, ISO, and other styles

26

Editorial, Article. "11th International Symposium «Powder Metallurgy: Surface Engineering,New Powder Composite Materials, Protective Coatings.Welding»." Izvestiya Vuzov. Poroshkovaya Metallurgiya i Funktsional’nye Pokrytiya (Universitiesʹ Proceedings. Powder Metallurgy аnd Functional Coatings), no. 2 (June 19, 2019): 75–76. http://dx.doi.org/10.17073/1997-308x-2019-2-75-76.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Capus, Joseph M. "Clintonomics and powder metallurgy." Metal Powder Report 48, no. 4 (April 1993): 56. http://dx.doi.org/10.1016/0026-0657(93)90541-y.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Kmita, A., and A. Roczniak. "Implementation of Nanoparticles in Materials Applied in Foundry Engineering." Archives of Foundry Engineering 17, no. 3 (September 1, 2017): 205–9. http://dx.doi.org/10.1515/afe-2017-0116.

Full text

Abstract:

Abstract The ceaseless progress of nanotechnology, observed in the last years, causes that nanomaterials are more and more often applied in several fields of industry, technique and medicine. E.g. silver nanoparticles are used in biomedicine for disinfection and polymer nanoparticles allow insulin transportation in pharmacology. New generation materials containing nanoparticles are also used in the chemical industry (their participation in the commercial market equals app. 53 %). Nanomaterials are used in electronics, among others for semiconductors production (e.g. for producing nanoink Ag, which conducts electric current). Nanomaterials, due to their special properties, are also used in the foundry industry in metallurgy (e.g. metal alloys with nanocrystalline precipitates), as well as in investment casting and in moulding and core sand technologies. Nanoparticles and containing them composites are applied in several technologies including foundry practice, automotive industry, medicine, dentistry etc. it is expected that their role and market share will be successively growing.

APA, Harvard, Vancouver, ISO, and other styles

29

CANE, B. "Metallurgy service expands." International Journal of Fatigue 11, no. 2 (March 1989): 135. http://dx.doi.org/10.1016/0142-1123(89)90012-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Bunk, Wolfgang G. J. "Aluminium RS metallurgy." Materials Science and Engineering: A 134 (March 1991): 1087–97. http://dx.doi.org/10.1016/0921-5093(91)90931-c.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Habashi, F. "Copper metallurgy at the crossroads." Journal of Mining and Metallurgy, Section B: Metallurgy 43, no. 1 (2007): 1–19. http://dx.doi.org/10.2298/jmmb0701001h.

Full text

Abstract:

Copper technology changed from the vertical to the horizontal furnace and from the roast reaction to converting towards the end of the last century. However, the horizontal furnace proved to be an inefficient and polluting reactor. As a result many attempts were made to replace it. In the past 50 years new successful melting processes were introduced on an industrial scale that were more energy efficient and less polluting. In addition, smelting and converting were conducted in a single reactor in which the concentrate was fed and the raw copper was produced. The standing problem in many countries, however, is marketing 3 tonnes of sulfuric acid per tonne of copper produced as well as emitting large amounts of excess SO2 in the atmosphere. Pressure hydrometallurgy offers the possibility of liberating the copper industry from SO2 problem. Heap leaching technology has become a gigantic operation. Combined with solvent extraction and electrowinning it contributes today to about 20% of copper production and is expected to grow. Pressure leaching offers the possibility of liberating the copper industry from SO2 problem. The technology is over hundred years old. It is applied for leaching a variety of ores and concentrates. Hydrothermal oxidation of sulfide concentrates has the enormous advantage of producing elemental sulfur, hence solving the SO2 and sulfuric acid problems found in smelters. Precipitation of metals such as nickel and cobalt under hydrothermal conditions has been used for over 50 years. It has the advantage of a compact plant but the disadvantage of producing ammonium sulfate as a co-product. In case of copper, however, precipitation takes place without the need of neutralizing the acid, which is a great advantage and could be an excellent substitute for electrowinning which is energy intensive and occupies extensive space. Recent advances in the engineering aspects of pressure equipment design open the door widely for increased application. .

APA, Harvard, Vancouver, ISO, and other styles

32

Pokorska, Iwona. "Computer Methods in Design and Identification of Powder Metallurgy Materials." Advanced Materials Research 314-316 (August 2011): 1666–69. http://dx.doi.org/10.4028/www.scientific.net/amr.314-316.1666.

Full text

Abstract:

This paper has been focused on presentation of application of computer methods in design and identification of PM materials in cold forming operations. The solutions for direct and inverse problems of powder forging have been described. In order to solve an identification problem for powder metallurgy materials we assume desired material model characterizing by specific material law with desired material parameters. The material parameters are the design variables of the optimization problem which have to be solved.

APA, Harvard, Vancouver, ISO, and other styles

33

Sedlarikova, Marie, Martin Mika, Jan Hrabovsky, Tereza Tkacova, Guenter Fafilek, and Pavel Cudek. "Iron-Based Materials for Biodegradable Implants Prepared by Powder Metallurgy." ECS Transactions 99, no. 1 (December 12, 2020): 241–47. http://dx.doi.org/10.1149/09901.0241ecst.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Sedlarikova, Marie, Martin Mika, Jiri Hrabovsky, Tereza Tkacova, Guenter Fafilek, and Pavel Cudek. "Iron-Magnesium Materials for Biodegradable Implants Prepared by Powder Metallurgy." ECS Transactions 99, no. 1 (December 12, 2020): 249–53. http://dx.doi.org/10.1149/09901.0249ecst.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Shang, Feng, Hai Xia Zhou, Bin Qiao, Hua Qiang Li, and Yi Qiang He. "Application of Metal Powder Metallurgy Technology in Prepartion of Friction Materials of the Railway Vehicles." Advanced Materials Research 287-290 (July 2011): 2987–90. http://dx.doi.org/10.4028/www.scientific.net/amr.287-290.2987.

Full text

Abstract:

With the speed up of the train, higher performance demands are put forward to the materials which have friction function. The friction materials produced by power metallurgy technology have a lot of advantages, such as good wear resistance, better thermal conductivity, bearing high lord, work reliably and so on. So they are used widely in the fields such as auto industry, aerospace and so on. The application of metal powder metallurgy technology in preparation friction materials of railway vehicles was researched in this paper, such as brake-shoe, brake lining of train braking, pantograph slide of electric locomotive, electrify boots slider of the maglev train and so on. This kind of friction material has superior performance and better prospects.

APA, Harvard, Vancouver, ISO, and other styles

36

Peng, Hong, and Kerstin Forsberg. "Advances in Process Metallurgy." JOM 73, no. 6 (April 19, 2021): 1629–30. http://dx.doi.org/10.1007/s11837-021-04691-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Chang, Y. Austin. "The role of chemical metallurgy in the emerging field of materials science and engineering." Metallurgical and Materials Transactions B 25, no. 6 (December 1994): 789–816. http://dx.doi.org/10.1007/bf02662763.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Kosolapova, T. Ya, L. A. Dvorina, and A. M. Sasov. "Production of refractory compound materials for electronic engineering applications by the powder metallurgy method." Soviet Powder Metallurgy and Metal Ceramics 24, no. 9 (September 1985): 694–97. http://dx.doi.org/10.1007/bf00792165.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Sonsino, C. M. "Fatigue design for powder metallurgy." Metal Powder Report 45, no. 11 (November 1990): 754–64. http://dx.doi.org/10.1016/0026-0657(90)90460-x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Süllow, S., T. J. Gortenmulder, G. J. Nieuwenhuys, A. A. Menovsky, and J. A. Mydosh. "Metallurgy of Y1−xUxPd3." Journal of Alloys and Compounds 215, no. 1-2 (November 1994): 223–26. http://dx.doi.org/10.1016/0925-8388(94)90844-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Guard, Ray W., and S. W. Stafford. "Recruitment and Retention of Lower Division Metallurgy/Materials Students." MRS Proceedings 66 (1985). http://dx.doi.org/10.1557/proc-66-67.

Full text

Abstract:

ABSTRACTOpportunities in the materials science and engineering field appear quite plentiful into the next century. An increasing number of materials engineers will be needed by industry to develop new materials as well as adapt current ones to new needs. Is there a shortage of metallurgical/materials engineers? Academic institutions with existing or developing programs in materials may affect significant increases in enrollment by “marketing” materials high technology. The Department of Metallurgical Engineering at The University of Texas at El Paso has made exceptional progress in recruiting and retaining prospective engineering students into this technical area. What has been successful at UTEP may also benefit other academic programs.

APA, Harvard, Vancouver, ISO, and other styles

42

"Fracture toughness testing of powder metallurgy materials." Metal Powder Report 50, no. 7-8 (July 1995): 37. http://dx.doi.org/10.1016/0026-0657(95)92874-x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

"Vacuum metallurgy." Metal Powder Report 51, no. 10 (October 1996): 41. http://dx.doi.org/10.1016/s0026-0657(96)93568-7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

"Metallurgy prize." Metal Powder Report 74, no. 5 (September 2019): 231. http://dx.doi.org/10.1016/j.mprp.2019.07.050.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

"Powder metallurgy." Metal Powder Report 50, no. 7-8 (July 1995): 35. http://dx.doi.org/10.1016/0026-0657(95)92855-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

"ABB metallurgy." Metal Powder Report 46, no. 1 (January 1991): 12. http://dx.doi.org/10.1016/0026-0657(91)91980-k.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

"Powder Metallurgy." Metal Powder Report 48, no. 2 (February 1993): 37. http://dx.doi.org/10.1016/0026-0657(93)92812-j.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

"Powder metallurgy." Metal Powder Report 48, no. 2 (February 1993): 39. http://dx.doi.org/10.1016/0026-0657(93)92833-q.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

"Powder metallurgy." Metal Powder Report 48, no. 2 (February 1993): 42. http://dx.doi.org/10.1016/0026-0657(93)92865-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

"Quality in Research: International Symposium on Materials, Metallurgy, and Chemical Engineering." IOP Conference Series: Materials Science and Engineering 316 (March 2018): 011001. http://dx.doi.org/10.1088/1757-899x/316/1/011001.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!