Books on the topic 'Metallurgical and Materials Science'

Metals and Materials Society Minerals. Metallurgical and materials transactions: Physical metallurgy and materials science. Warrendale, PA: Minerals, Metals & Materials Society, 1994.

Kumar, Dharmendra. Materials science and manufacturing processes. 2nd ed. Jangpura, New Delhi: Vikas Publishing House, 1993.

Adaskin, Anatoliy, Aleksandr Krasnovskiy, and Tat'yana Tarasova. Materials science and technology of metallic, non-metallic and composite materials. ru: INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1143245.

Zeng, Jianmin, Yun-Hae Kim, and Yanfeng Chen. New materials, applications and processes: Selected, peer reviewed papers from the International Conference on Chemical, Material and Metallurgical Engineering (ICCMME 2011), December 23-25, 2011, Beihai, China. Switzerland: Trans Tech Publications Ltd., 2012.

Yazawa, International Symposium on Metallurgical and Materials Processing: Principles and Technologies (2003 San Diego Calif ). Metallurgical and materials processing: principles and technologies: Yazawa International Symposium : proceedings of the International Symposium : March 2-6, 2003, San Diego, California, USA. Warrendale, Pa: TMS, 2003.

National Seminar on the Application of Textures in Materials Research (1st 1997 Hyderabad, India). Textures in materials research: Proceedings of the First National Seminar on the Application of Textures in Materials Research (NASAT-97) held in [sic] Dec. 4-5, 1997 at the Defence Metallurgical Research Laboratory, Hyderabad (India). Enfield, N.H: Science Publishers, 1999.

International Conference on Modelling and Simulation in Metallurgical Engineering and Materials Science (1996 Beijing). The International Conference of Modelling and Simulation in Metallurgical Engineering and Materials Science: June 11-13, 1996, Beijing, China. Edited by Yü Tsung-sen, Xiao Zeqiang, Xie Xishan, and Chinese Society for Metals. Beijing: Metallurgical Industry Press, 1996.

International Symposium on Process Control and Automation in Extractive Metallurgy (1989 Las Vegas, Nev.). Process control and automation in extractive metallurgy: Proceedings of an International Symposium on Process Control and Automation in Extractive Metallurgy. Warrendale, Pa: TMS, 1988.

International Symposium on Superalloys. (6th 1988 Champion, Pa.). Superalloys 1988: Proceedings of the Sixth International Symposium on Superalloys sponsored by the High Temperature Alloys Committee of the Metallurgical Society, held September 18-22, 1988, Seven Springs Mountain Resort, Champion Pennsylvania. Warrendale, Pa: The Society, 1988.

Lʹvov, A. L. (Anatoliĭ Lʹvovich), ed. Pik Metalloveda: Akademik Bochvar. Moskva: MISiS, 2009.

Yin, Ruiyu. Metallurgical Process Engineering. Berlin, Heidelberg: Metallurgical Industry Press,Beijing and Springer-Verlag Berlin Heidelberg and Metallurgical Industry Press, 2011.

J, Srolovitz David, American Society for Metals. Materials Science Division. Computer Simulation Technical Activity., and Metallurgical Society of AIME. Fall Meeting, eds. Computer simulation of microstructural evolution: Proceedings of a symposium sponsored by the American Society for Metals Materials Science Division Computer Simulation Technical Activity, held at the Fall Meeting of the Metallurgical Society in Toronto, Canada, October 13-17, 1985. Warrendale, PA: Metallurgical Society, 1986.

Stern, K. H. Metallurgical and Ceramic Protective Coatings. Dordrecht: Springer Netherlands, 1996.

Dunn, Barrie D. Metallurgical assessment of spacecraft parts and materials. Chichester: E. Horwood, 1989.

Dunn, Barrie D. Metallurgical assessment of spacecraft parts, materials, and processes. 2nd ed. Chichester: Wiley, 1997.

Walak, Steven E. Heat pipe fatigue test specimen: Metallurgical evaluation. [Washington, DC]: National Aeronautics and Space Administration, 1992.

Belyaev, A. I. Surface Phenomena in Metallurgical Processes: Proceedings of an Interinstitute Conference. Boston, MA: Springer New York, 1995.

1930-, Bennett L. H., and American Society for Metals. Alloy Phase Diagram Data Committee., eds. Computer modeling of phase diagrams: Proceedings of a symposium sponsored by the Alloy Phase Diagram Data Committee of the Materials Science Division of the American Society for Metals, held at the Fall meeting of the Metallurgical Society in Toronto, Canada, October 13-17, 1985. Warrendale, Pa: Metallurgical Society, 1986.

I, Lakshmanan V., and Society for Mining, Metallurgy, and Exploration (U.S.), eds. Advanced materials: Application of mineral and metallurgical processing principles. Littleton, CO: Society for Mining, Metallurgy, and Exp loration, 1990.

International Symposium on Advances in Refractories for the Metallurgical Industries (3rd 1999 Québec, Quebec). Advances in refractories for the metallurgical industries III: Proceedings of the International Symposium on Advances in Refractories for the Metallurgical Industries III. Edited by Allaire Claude 1958-, Rigaud M. 1939-, Canadian Institute of Mining, Metallurgy and Petroleum., and Conference of Metallurgists (38th : 1999 : Québec, Quebec). Montréal, Qué: Canadian Institute of Mining, Metallurgy and Petroleum, 1999.

P, Beiss, Dalal K, Peters R, Huppmann W. J, and Metal Powder Industries Federation, eds. International atlas of powder metallurgical microstructures. Princeton, N.J: MPIF, 2002.

Anderson, J. C., K. D. Leaver, R. D. Rawlings, and J. M. Alexander. Materials Science. Boston, MA: Springer US, 1990. http://dx.doi.org/10.1007/978-1-4899-6826-5.

1922-, Anderson J. C., ed. Materials science. 3rd ed. Berkshire, England: Van Nostrand Reinhold, 1985.

Materials science. Minneapolis, MN: Lerner Publications, 2009.

N, Arzamasov B., and Afanasyev V, eds. Materials science. Moscow: Mir Publishers, 1989.

Materials science. Cheltenham: Stanley Thornes, 1995.

International, Symposium on Advances in Refractories for the Metallurgical Industries (2nd 1997 Montraeal Quaebec). Advances in refractories for the metallurgical industries II: Proceedings of the International Symposium on Advances in Refractories for the Metallurgical Industries II, Montreal, Quebec, August 24-29, 1996. Montreal: Canadian Institute of Mining, Metallurgy and Petroleum, 1996.

Radionov, Andrey A. Materials Science and Metallurgical Technology. Trans Tech Publications, Limited, 2019.

Radionov, Andrey A. Materials Science and Metallurgical Technology III. Trans Tech Publications, Limited, 2022.

Radionov, Andrey A. Materials Science and Metallurgical Technology III. Trans Tech Publications, Limited, 2022.

Radionov, Andrey A. Materials Science and Metallurgical Technology II. Trans Tech Publications, Limited, 2020.

Radionov, Andrey A. Materials Science and Metallurgical Technology II. Trans Tech Publications, Limited, 2020.

Radionov, Andrey A. Materials Science and Metallurgical Technology : International Russian Conference on Materials Science and Metallurgical Technology: Selected, Peer Reviewed Papers from the International Russian Conference on Materials Science and Metallurgical Technology , October 1-4, 2018, Chelyabinsk, Russian Federation. Trans Tech Publications, Limited, 2019.

(Editor), George E. Totten, Kiyoshi Funatani (Editor), and Lin Xie (Editor), eds. Handbook of Metallurgical Process Design (Materials Engineering, 24). CRC, 2004.

Hopkins, Donald W., Igor Wilkomirsky, Lucien Coudurier, and D. W. Hopkins. Fundamentals of Metallurgical Processes: International Series on Materials Science and Technology. Elsevier Science & Technology Books, 2013.

(Editor), Florian Kongoli, Kimio Itagaki (Editor), Chikabumi Yamauchi (Editor), and Hong Yong Sohn (Editor), eds. Metallurgical and Materials Processing: Principles and Technologies (Azawa International Symposium). Minerals, Metals, & Materials Society, 2003.

Dube, R. K., G. S. Upadhyaya, and D. W. Hopkins. Problems in Metallurgical Thermodynamics and Kinetics: International Series on Materials Science and Technology. Elsevier Science & Technology Books, 2013.

Design education in metallurgical and materials engineering: Proceedings of a symposium. Warrendale, Pa: The Society, 1993.

(Editor), Hong Yong Sohn, K. Itagaki (Editor), C. Yamauchi (Editor), and F. Kongoli (Editor), eds. Metallurgical and Materials Processing Principles and Technologies (Yazawa International Symposium): Aqueous and Electrochemical Processing. Minerals, Metals, & Materials Society, 2003.

Michael, Burns. Study Guide for Principles and Practice of Engineering Exam Metallurgical and Materials Engineering: 2022 Revised Edition. TMS, 2022.

Partelpoeg, E. H., and D. C. Himmesoete. Process Control and Automation in Extractive Metallurgy Iii/351. Tms, 1989.

Baruah, Mayuri, Renu Kumari, and Poulami Maji, eds. Abstracts of National Conference on Research and Developments in Material Processing, Modelling and Characterization 2020. AIJR Publisher, 2020. http://dx.doi.org/10.21467/abstracts.108.

Kaur, Harrison. MATERIALS and METALLURGICAL ENGINEERING. Independently Published, 2018.

Hintermann, H. E., and J. Spitz. Metallurgical Coatings and Materials Surface Modifications. Elsevier Science & Technology Books, 1991.

Metallurgical Modelling of Welding (Materials Modelling). Ashgate Publishing, 1994.

Ghosh, Ahindra. Textbook of Materials and Metallurgical Thermodynamics. Prentice-Hall of India Pvt.Ltd, 2004.

Metallurgical Coatings and Materials Surface Modifications. Elsevier Science & Technology Books, 1991.

Bazaluk, Oleg. Advances in Metallurgical Technology. Scientific Research Publishing, 2022.

Research, Institute For Career. Career as an Engineer: Materials and Metallurgical. Createspace Independent Publishing Platform, 2018.

Dunn, Barrie D. Metallurgical Assessment of Spacecraft Parts and Materials. John Wiley and Sons Ltd, 1994.