Relevant bibliographies by topics / Metallurgical and Materials Science

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Metallurgical and Materials Science'

Author: Grafiati
Published: 6 September 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Metallurgical and Materials Science.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Metallurgical and Materials Science"

1

Readey, D. W. "Specific Materials Science and Engineering Education." MRS Bulletin 12, no. 4 (June 1987): 30–33. http://dx.doi.org/10.1557/s0883769400067762.

Full text
Abstract:
Forty years ago there were essentially no academic departments with titles of “Materials Science” or “Materials Engineering.” There were, of course, many materials departments. They were called “Metallurgy,” “Metallurgical Engineering,” “Mining and Metallurgy,” and other permutations and combinations. There were also a small number of “Ceramic” or “Ceramic Engineering” departments. Essentially none included “polymers.” Over the years titles have evolved via a route that frequently followed “Mining and Metallurgy,” to “Metallurgical Engineering,” to “Materials Science and Metallurgical Engineering,” and finally to “Materials Science and Engineering.” The evolution was driven by recognition of the commonality of material structure-property correlations and the concomitant broadening of faculty interests to include other materials. However, the issue is not department titles but whether a single degree option in materials science and engineering best serves the needs of students.Few proponents of materials science and engineering dispute the necessity for understanding the relationships between processing (including synthesis), structure, and properties (including performance) of materials. However, can a single BS degree in materials science and engineering provide the background in these relationships for all materials and satisfy the entire market now served by several different materials degrees?The issue is not whether “Materials Science and Engineering” departments or some other academic grouping of individuals with common interests should or should not exist.
APA, Harvard, Vancouver, ISO, and other styles
2

Liu, Yiliang, Youpo Su, Guoqiang Xu, Yanhua Chen, and Gaoshuai You. "Research Progress on Controlled Low-Strength Materials: Metallurgical Waste Slag as Cementitious Materials." Materials 15, no. 3 (January 19, 2022): 727. http://dx.doi.org/10.3390/ma15030727.

Full text
Abstract:
Increasing global cement and steel consumption means that a significant amount of greenhouse gases and metallurgical wastes are discharged every year. Using metallurgical waste as supplementary cementitious materials (SCMs) shows promise as a strategy for reducing greenhouse gas emissions by reducing cement production. This strategy also contributes to the utilization and management of waste resources. Controlled low-strength materials (CLSMs) are a type of backfill material consisting of industrial by-products that do not meet specification requirements. The preparation of CLSMs using metallurgical waste slag as the auxiliary cementing material instead of cement itself is a key feature of the sustainable development of the construction industry. Therefore, this paper reviews the recent research progress on the use of metallurgical waste residues (including blast furnace slag, steel slag, red mud, and copper slag) as SCMs to partially replace cement, as well as the use of alkali-activated metallurgical waste residues as cementitious materials to completely replace cement for the production of CLSMs. The general background information, mechanical features, and properties of pozzolanic metallurgical slag are introduced, and the relationship and mechanism of metallurgical slag on the performance and mechanical properties of CLSMs are analyzed. The analysis and observations in this article offer a new resource for SCM development, describe a basis for using metallurgical waste slag as a cementitious material for CLSM preparation, and offer a strategy for reducing the environmental problems associated with the treatment of metallurgical waste.
APA, Harvard, Vancouver, ISO, and other styles
3

Huang, Peng, Xi Sun, Xixi Su, Qiang Gao, Zhanhao Feng, and Guoyin Zu. "Three-Point Bending Behavior of Aluminum Foam Sandwich with Different Interface Bonding Methods." Materials 15, no. 19 (October 6, 2022): 6931. http://dx.doi.org/10.3390/ma15196931.

Full text
Abstract:
The interface bonding method has a great influence on the mechanical properties of aluminum foam sandwich (AFS). This study aims to investigate the effect of different interface bonding methods on the mechanical properties of AFS. In this paper, the metallurgical-bonding interface-formation mechanism of AFS prepared by powder metallurgy was investigated. The shear properties of metallurgical-bonded AFS were determined by the panel peeling test. The flexural properties and energy absorption of metallurgical-bonded and glued AFS were analyzed through the three-point bending test. The results show that the magnesium, silicon, and copper elements of the core layer diffuse to panels and form a metallurgical composite layer. The metallurgical-bonding strength between the panel and core layer is higher than that of the foam core layer. The peak load of metallurgically-bonded AFS is 24% more than that of glued AFS, and energy absorption is 12.2 times higher than that of glued AFS.
APA, Harvard, Vancouver, ISO, and other styles
4

Fleuriault, Camille, Joseph Grogan, and Jesse White. "Refractory Materials for Metallurgical Uses." JOM 70, no. 11 (August 21, 2018): 2420–21. http://dx.doi.org/10.1007/s11837-018-3096-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Lis, Teresa, Krzysztof Nowacki, and Tomasz Małysa. "Utilization of Metallurgical Waste in Non-Metallurgical Industry." Solid State Phenomena 212 (December 2013): 195–200. http://dx.doi.org/10.4028/www.scientific.net/ssp.212.195.

Full text
Abstract:
The iron and steel industry is one of the largest sources of waste materials, primarily in the form of steelmaking dusts, sludge and slag. Those wastes are a serious threat to the environment. Main precondition for the protection of natural resources in the environment is to recover raw material and energy from waste. The use of waste as raw materials does not involve the storage and creates the possibility of closure of the existing landfill. The article presented utilization of same metallurgical waste containing 4-20 wt. % zinc in non-metallurgical industry. Performed chemical analyzes of pollutants contained in waste tested (dusts, sludge and slag) and in manufactured products (cement bricks, ceramic construction materials, colored glass products and slag for road construction). Aqueous extracts analysis results were compared with the maximum values for the sewage entering into water and soil. The performed research proves that proposed technologies (production of cement clinker, construction bricks, hollow glass, decorated glass) do not pose threat to environment. Harmful impurities are eluted from the products – clinker, constructions bricks and slag after the recovery of zinc recovery. Proposed technologies substitution of primary raw materials recyclable materials can reduce environmental degradation.
APA, Harvard, Vancouver, ISO, and other styles
6

Zhang, Jiangshan, Yuhong Liu, and Qing Liu. "Metallurgical Process Simulation and Optimization." Materials 15, no. 23 (November 26, 2022): 8421. http://dx.doi.org/10.3390/ma15238421.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Huang, Wan. "Computer Application for Metallurgical Material Field." Applied Mechanics and Materials 66-68 (July 2011): 2041–45. http://dx.doi.org/10.4028/www.scientific.net/amm.66-68.2041.

Full text
Abstract:
At present the design of metallurgical engineering materials research largely also depends on the facts and experience accumulation. As a modern tools, computers increasingly play a huge role in today's world of various fields, it has penetrated into every subject areas and daily lifewhich become the symbol of modernization. In material field, computer is also gradually become extremely important tool. It is one of the important reasons that the application of computer in material science makes materials science rapid development .
APA, Harvard, Vancouver, ISO, and other styles
8

Sadoway, D. R. "Metallurgical Electrochemistry: The Interface between Materials Science and Molten Salt Chemistry." Materials Science Forum 73-75 (January 1991): 555–60. http://dx.doi.org/10.4028/www.scientific.net/msf.73-75.555.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Raabe, Dierk, Gerhard Dehm, Jörg Neugebauer, and Michael Rohwerder. "100 years public–private partnership in metallurgical and materials science research." Materials Today 20, no. 7 (September 2017): 335–37. http://dx.doi.org/10.1016/j.mattod.2017.02.005.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Zhao, Qiang, Lang Pang, and Dengquan Wang. "Adverse Effects of Using Metallurgical Slags as Supplementary Cementitious Materials and Aggregate: A Review." Materials 15, no. 11 (May 26, 2022): 3803. http://dx.doi.org/10.3390/ma15113803.

Full text
Abstract:
This paper discusses a sustainable way to prepare construction materials from metallurgical slags. Steel slag, copper slag, lead-zinc slag, and electric furnace ferronickel slag are the most common metallurgical slags that could be used as supplementary cementitious materials (SCMs) and aggregates. However, they have some adverse effects that could significantly limit their applications when used in cement-based materials. The setting time is significantly delayed when steel slag is utilized as an SCM. With the addition of 30% steel slag, the initial setting time and final setting time are delayed by approximately 60% and 40%, respectively. Because the specific gravity of metallurgical slags is 10–40% higher than that of natural aggregates, metallurgical slags tend to promote segregation when utilized as aggregates. Furthermore, some metallurgical slags deteriorate the microstructure of hardened pastes, resulting in higher porosity, lower mechanical properties, and decreased durability. In terms of safety, there are issues with the soundness of steel slag, the alkali-silica reaction involving cement and electric furnace ferronickel slag, and the environmental safety concerns, due to the leaching of heavy metals from copper slag and lead-zinc slag.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Metallurgical and Materials Science"

1

Jenkins, Neil Travis 1973. "Chemistry of airborne particles from metallurgical processing." Thesis, Massachusetts Institute of Technology, 2003. http://hdl.handle.net/1721.1/17033.

Full text
Abstract:
Thesis (Ph.D.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 2003.
Vita.
Includes bibliographical references.
Airborne particles fall into one of three size ranges. The nucleation range consists of nanoparticles created from vapor atom collisions. The decisive parameter for particle size and composition is the supercooling of the vapor. The accumulation range, which comprises particles less than 2 micrometers, consists of particles formed from the collision of smaller primary particles from the nucleation range. The composition of agglomerates and coalesced particles is the same as the bulk vapor composition. Coarse particles, the composition of which is determined by a liquid precursor, are greater than 1 micrometer and solidify from droplets whose sizes are controlled by surface, viscous, and inertial forces. The relationship between size and composition of airborne particles could be seen in welding fume, a typical metallurgical aerosol. This analysis was performed with a cascade impactor and energy dispersive spectrometry with both scanning electron microscopy (SEM-EDS) and scanning transmission electron microscopy (STEM-EDS). Other methods for properly characterizing particles were discussed. In the analysis, less than 10% of the mass of fume particles for various types of gas metal arc welding (GMAW) were coarse, while one-third of flux cored arc welding (FCAW) fume particles were coarse. Coarse particles had a composition closer to that of the welding electrode than did fine particles. Primary particles were not homogeneous. Particles larger than the mean free path of the carrier gas had the same composition as that of the vapor, but for particles 20 to 60 nanometers, smaller particles were more enriched in volatile metals than larger particles were. This was explained by the cooling path along the bubble point line of a binary phase diagram.
(cont.) Particles were not necessarily homogenous internally. Because nanoparticles homogenize quickly, they may form in a metastable state, but will not remain in that state. In this analysis, the presence of multiple stable immiscible phases explains this internal heterogeneity. The knowledge contained herein is important for industries that depend on the properties of nanoparticles, and for manufacturing, where industrial hygiene is important because of respirable particle by-products, such as high-energy-density metallurgical processing.
by Neil Travis Jenkins.
Ph.D.
APA, Harvard, Vancouver, ISO, and other styles
2

King, Matthew Joseph. "Control and optimization of metallurgical sulfuric acid plants." Diss., The University of Arizona, 1999. http://hdl.handle.net/10150/284812.

Full text
Abstract:
The pyrometallurgical processing of copper concentrates produces SO₂-bearing offgas. SO₂ in the offgas is catalytically oxidized to SO₃ and absorbed into a ∼98.5% H₂SO₄-H₂O mixture in a sulfuric acid plant. This research provides an analysis of a copper smelter sulfuric acid plant and discusses the control and optimization necessary to attain the following goals: (a) minimize smelter SO₂ emissions; (b) maximize acid plant capacity and availability. The objectives of this work are to: (a) prepare mathematical descriptions of sulfuric acid plant operations; compare the mathematical predictions with plant data; (c) use the mathematical descriptions to: (i) predict acid plant behavior with varying feed SO₂ strengths and gas flow rates; (ii) determine control strategies to minimize smelter SO₂ emissions; (iii) evaluate requirements for an existing acid plant to accommodate future increased feed gas flows and SO₂ strengths.
APA, Harvard, Vancouver, ISO, and other styles
3

Bernardis, Sarah. "Engineering impurity behavior on the micron-scale in metallurgical-grade silicon production." Thesis, Massachusetts Institute of Technology, 2012. http://hdl.handle.net/1721.1/101457.

Full text
Abstract:
Thesis: Ph. D., Massachusetts Institute of Technology, Department of Materials Science and Engineering, 2012.
This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.
Cataloged from student-submitted PDF version of thesis.
Includes bibliographical references (pages 127-137).
Impurities are detrimental to silicon-based solar cells. A deeper understanding of their evolution, microscopic distributions, and oxidation states throughout the refining processes may enable the discovery of novel refining techniques. Using synchrotron-based microprobe techniques and bulk chemical analyses, we investigate Fe, Ti, and Ca starting from silicon- and carbon bearing raw feedstock materials to metallurgical grade silicon (MG-Si), via carbothermic reduction. Before reduction, impurities are present in distinct micron- or sub-micron-sized minerals, frequently located at structural defects in Si-bearing compounds. Chemical states vary, they are generally oxidized (e.g., Fe²+, Fe³+). Impurity concentrations are directly correlated to the geological type of quartz: pegmatitic and hydrothermal quartz have fewer impurities than quartzite. Particles containing Cr, Mn, Fe, Ni, Cu, K, and/or Zn are also detected. In carbon-bearing compounds, Ca typically follows wood veins. In wood, Fe and Ti are diffused uniformly. In contrast, charcoal samples can contain particles of Fe, Ti, and/or Ca. The overall impurity content in the pine charcoal sample is higher than in the pine woodchip, suggesting that the charcoalization process introduces unintentional contamination. During reduction, silica evolution is analyzed in parallel to Fe. Fe is predominantly clustered in minerals which influence its oxidation state. Here, Fe is embedded in muscovite with predominance of Fe℗đ+. Initially, Fe is affected by the decomposition of muscovite and it is found as Fe²+; as muscovite disappears, Fe diffuses in the molten silica, segregating towards interfaces. Contrary to thermodynamic expectation, Fe is oxidized until late in the reduction process as the silica melt protects it from gases present in the furnace, hence minimizing its reduction, only partially measured at high temperatures. After reduction, the initial low- to sub- ppmw concentrations measured in the precursor quartz increase drastically in the MG-Si. The refining process is responsible for the increased contamination. Yet, most impurities are clustered at grain boundaries and a leaching process could remove them. Electrical fragmentation and a leaching treatment are tested as a method to expose grain boundaries of "dirty" quartzite and to remove impurities. The selective fragmentation proves to be a very important step in removing impurities via leaching.
by Sarah Bernardis.
Ph. D.
APA, Harvard, Vancouver, ISO, and other styles
4

Papakirillou, Ismini. "A metallurgical study of West African iron monies from Cameroon and Liberia." Thesis, Massachusetts Institute of Technology, 2009. http://hdl.handle.net/1721.1/55263.

Full text
Abstract:
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 2009.
Cataloged from PDF version of thesis.
Includes bibliographical references (p. 200-202).
The aim of this thesis is to make a contribution to the study of West African iron monies through examination and analysis of a group of these objects in the collection of the Peabody Museum of Archaeology and Ethnology at Harvard University. The selection of objects from the collection includes five distinct types, representing different sizes and shapes that have been identified as monies/exchange mediums. All of these object types were originally part of a bundle or remain in bundled form; all share a provenience in West Africa, four groups in present day Cameroon and one in Liberia. The research corpus of material has dates ranging from the late nineteenth to the early twentieth century. My metallurgical studies of West African iron monies are the first such investigations to have been carried out. The results will contribute to the appreciation of the ways in which iron 'monies' functioned within late nineteenth - early twentieth century West African societies.
by Ismini Papakirillou.
S.M.
APA, Harvard, Vancouver, ISO, and other styles
5

Cooney, Elizabeth Myers. "Bronze metallurgy in Iron Age central Europe : a metallurgical study of Early Iron Age bronzes from Stična, Slovenia." Thesis, Massachusetts Institute of Technology, 2007. http://hdl.handle.net/1721.1/39480.

Full text
Abstract:
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 2007.
This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.
Includes bibliographical references (v. 2, p. 375-377).
The Early Iron Age (750-450 BCE) marks a time in the European Alpine Region in which cultural ideologies surrounding bronze objects and bronze production were changing. Iron was becoming the preferred material from which to make many utilitarian objects such as weapons and agricultural tools; this change can be clearly seen in the different treatments of bronze object deposits from the Late Bronze Age to the Early Iron Age. The Early Iron Age hillfort settlement of Sticna in what is now southeastern Slovenia was one of the first incipient commercial centers to take advantage of the new importance placed on iron, conducting trade with Italy, Greece, the Balkans, and northern Europe. This metallurgical study of bronze funerary objects from Sticna identifies construction techniques, use patterns, and bronze metallurgical technologies from the ancient region of Lower Carniola. This information is then used to explore the cultural importance of bronze at Early Iron Age Sticna and to compare the bronze work of Lower Carniola with that of other regions in central Europe and Italy from this time of great change in Iron Age Europe.
S.M.
APA, Harvard, Vancouver, ISO, and other styles
6

Payton, Eric John. "Characterization and Modeling of Grain Coarsening in Powder Metallurgical Nickel-Based Superalloys." The Ohio State University, 2009. http://rave.ohiolink.edu/etdc/view?acc_num=osu1250265477.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Jönsson, Martin. "The Atmospheric Corrosion of Magnesium Alloys : Influence of Microstructure and Environments." Doctoral thesis, KTH, Kemi, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-4545.

Full text
Abstract:
The low density and high specific strength of magnesium alloys have created a great deal of interest in the use of these alloys in the automotive and aerospace industries and in portable electronics. All of these industries deal with applications in which weight is extremely important. However, an obstacle to overcome when using magnesium alloys in engineering applications are their unsatisfactory corrosion properties. This thesis is devoted to the atmospheric corrosion of the two magnesium alloys AZ91D and AM50, in particular the ways the microstructure and exposure parameters of these alloys influence their corrosion behaviour. The work includes both laboratory and field studies. The results obtained show that the microstructure is of vital importance for the corrosion behaviour under atmospheric conditions. The microstructure of magnesium-aluminium alloys contains different intermetallic phases, e.g. Al8Mn5 and β-Mg17Al12. The local nobility of these intermetallic phases was measured on a submicron level in an atmospheric environment. It was shown that particles of the Al-Mn type exhibit the highest Volta potential among the microstructure constituents of the AZ91D magnesium alloy. Further, it was shown that the Volta potential was highly dependent on the aluminium content of the magnesiumaluminium phases in the surface layer. When thin electrolyte layers are present, CO2 diffuses readily to the surface forming magnesium carbonate, hydromagnesite. The CO2 lowers the pH in areas on the surface that are alkaline due to the cathodic reaction. This stabilises the aluminium-containing surface film, the result being increased corrosion protection of phases rich in aluminium. Both in the laboratory and under field conditions the corrosion attack was initiated in large α-phase grains, which is explained by the lower aluminium content in these grains. The thin electrolyte film, which is formed under atmospheric conditions, decreases the possibility of galvanic coupling of alloy constituents located at larger distances from each other. Thus the cathodic process is in most cases located in the eutectic α-/β phase close to the α-phases, instead of in intermetallic Al-Mn particles, even though the driving force for the initiation of the corrosion attack in Al-Mn particles should be high, due to their high nobility.

QC 20100802

APA, Harvard, Vancouver, ISO, and other styles
8

Duffey, Matthew James. "Metallurgical Characterization and Weldability Evaluation of Ferritic and Austenitic Welds in Armored Steels." The Ohio State University, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=osu1460910681.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Boster, Connor M. Boster. "Metallurgical Characterization and Testing of Dissimilar Metal Welds for Service in Hydrogen Containing Environments." The Ohio State University, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=osu1524179509481363.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Semykina, Anna. "Recovery of iron and manganese values from metallurgical slags by the oxidation route." Doctoral thesis, KTH, Materialens processvetenskap, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-24534.

Full text
Abstract:
In the modern practice, a sustainable development strategy in a domain of wasteutilization is shifting its focus from a general completeness of recycling to a morespecific attention to efficiently utilize elements in the wastes. This is well-illustrated bythe steelmaking slag industries. The major waste product from the steelmaking practiceis slag and its main constituents are: CaO, SiO2, Al2O3, MnO, FeO and so on. The mainfield of application for the steelmaking slags is civil engineering, especially for road andwaterway construction. However, a significant amount of the slag remains in the dumps,damaging the environment as well as requiring a land for secure storage. Efficientrecycling of these materials is of increasing interest worldwide as a result of increasingsustainability in processes with respect to increasing raw material costs and wastereduction.In order to find a practical solution, joint efforts are currently made at the RoyalInstitute of Technology, Sweden and National Metallurgical Academy of Ukraine. Theconcept is based on transformation of non-magnetic wüstite (FeO) to magneticmagnetite (Fe3O4) using an oxidizing atmosphere was proposed.In order to verify the feasibility of the proposed way of slag utilization, experiments onthe ternary CaO-FeO-SiO2 and quaternary CaO-FeO-SiO2-MnO slags systems,accompanied by thermodynamic and kinetic modelling, were performed. The crystalprecipitation during synthetic slag oxidation was observed by Confocal Scanning LaserMicroscopy (CSLM). Precipitated phases were found to be magnetite and manganeseferrite in the spinel form.Obtained magnetite and manganese ferrite can be separated from the slag by magneticseparation.The formation of nanosize manganese ferrite from the CaO-FeO-SiO2-MnO slag systemduring oxidation was investigated. Experiments were conducted in a horizontalresistance furnace in an oxidizing atmosphere (air). The final product was analysed by Xraydiffraction (XRD). The particles size of the manganese ferrite was estimated by theScherrer formula and was found to be of the order of 23-25 nm. In order to get anunderstanding of the magnetic properties of the manganese ferrite recovered from slagtreatment, it was necessary to synthesize a reference compound from pure precursors.The MnFe2O4 nanopowder was synthesized by the oxalate route. The size effects on themagnetic properties of manganese ferrite particles were investigated.IIThe potential way of the magnetite particles separation from liquid slags was investigatedby cold model studies. The experimental technique of mobilising non-conducting,nonmagnetic particles in conducting liquid in crossed electric and magnetic fields wasinvestigated in order to find the way of the particle separation from the liquidsteelmaking slags. The effects of the current density, magnetic field, size and shape ofthe particle on the particle velocity under action of the electromagnetic buoyancy force(EBF) in the electrolyte were analyzed.
QC 20100916
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Metallurgical and Materials Science"

1

Metals and Materials Society Minerals. Metallurgical and materials transactions: Physical metallurgy and materials science. Warrendale, PA: Minerals, Metals & Materials Society, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kumar, Dharmendra. Materials science and manufacturing processes. 2nd ed. Jangpura, New Delhi: Vikas Publishing House, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Adaskin, Anatoliy, Aleksandr Krasnovskiy, and Tat'yana Tarasova. Materials science and technology of metallic, non-metallic and composite materials. ru: INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1143245.

Full text
Abstract:
Book 1 of the textbook consists of two parts. Part I describes the structure of metallic, non-metallic, and composite materials. Technologies of production of metal materials are considered: metallurgical production of ferrous and non-ferrous metals; powder metallurgy; technologies of production of non-metallic materials: polymers, glass, graphite; technologies of production of composite materials, including semi-finished products-prepregs, premixes. Part II is devoted to methods for studying the properties of materials. Metal materials, technologies of their hardening by thermal, chemical-thermal treatment, and plastic deformation are considered. The features of organic and inorganic nonmetallic materials, as well as the possibility of changing their properties, are given. Composite materials are widely covered, and the areas of their rational application are shown. Revised chapter 14, which deals with intelligent materials. Meets the requirements of the federal state educational standards of higher education of the latest generation. For bachelors and undergraduates studying in groups of training areas 15.00.00 "Mechanical Engineering" and 22.00.00 "Materials Technologies". It can be used for training graduate students of engineering specialties, as well as for advanced training of engineering and technical workers of machine-building enterprises.
APA, Harvard, Vancouver, ISO, and other styles
4

Zeng, Jianmin, Yun-Hae Kim, and Yanfeng Chen. New materials, applications and processes: Selected, peer reviewed papers from the International Conference on Chemical, Material and Metallurgical Engineering (ICCMME 2011), December 23-25, 2011, Beihai, China. Switzerland: Trans Tech Publications Ltd., 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Yazawa, International Symposium on Metallurgical and Materials Processing: Principles and Technologies (2003 San Diego Calif ). Metallurgical and materials processing: principles and technologies: Yazawa International Symposium : proceedings of the International Symposium : March 2-6, 2003, San Diego, California, USA. Warrendale, Pa: TMS, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

National Seminar on the Application of Textures in Materials Research (1st 1997 Hyderabad, India). Textures in materials research: Proceedings of the First National Seminar on the Application of Textures in Materials Research (NASAT-97) held in [sic] Dec. 4-5, 1997 at the Defence Metallurgical Research Laboratory, Hyderabad (India). Enfield, N.H: Science Publishers, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

International Conference on Modelling and Simulation in Metallurgical Engineering and Materials Science (1996 Beijing). The International Conference of Modelling and Simulation in Metallurgical Engineering and Materials Science: June 11-13, 1996, Beijing, China. Edited by Yü Tsung-sen, Xiao Zeqiang, Xie Xishan, and Chinese Society for Metals. Beijing: Metallurgical Industry Press, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

International Symposium on Process Control and Automation in Extractive Metallurgy (1989 Las Vegas, Nev.). Process control and automation in extractive metallurgy: Proceedings of an International Symposium on Process Control and Automation in Extractive Metallurgy. Warrendale, Pa: TMS, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

International Symposium on Superalloys. (6th 1988 Champion, Pa.). Superalloys 1988: Proceedings of the Sixth International Symposium on Superalloys sponsored by the High Temperature Alloys Committee of the Metallurgical Society, held September 18-22, 1988, Seven Springs Mountain Resort, Champion Pennsylvania. Warrendale, Pa: The Society, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Lʹvov, A. L. (Anatoliĭ Lʹvovich), ed. Pik Metalloveda: Akademik Bochvar. Moskva: MISiS, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Metallurgical and Materials Science"

1

Rowshan, Reza, and Mária Kocsis Baán. "Thermal and Metallurgical Modelling of Laser Transformation Hardened Steel Parts." In Materials Science Forum, 599–606. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-426-x.599.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Tsao, Shen, and Shuang Shii Lian. "Refining of Metallurgical-Grade Silicon by Thermal Plasma Arc Melting." In Materials Science Forum, 2595–98. Stafa: Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-960-1.2595.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Toyoda, Masao, Masahito Mochizuki, and Yoshiki Mikami. "Metallurgical and Mechanical Heterogeneity in Weld Materials Considering Multiple Heat Cycles and Phase Transformation." In Materials Science Forum, 19–24. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-996-2.19.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kestens, L. A. I., and Roumen Petrov. "Physical Metallurgical Aspects of Texture Control by Thermo-Mechanical Processing of Low-Carbon Steel Sheet." In Materials Science Forum, 835–41. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-443-x.835.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Wang, Qing Feng, Cheng Jia Shang, R. D. Fu, Ya Nan Wang, and Wayne Chen. "Physical Simulation and Metallurgical Evaluation of Heat-Affected Zone during Laser Welding of Ultrafine Grain Steel." In Materials Science Forum, 2717–20. Stafa: Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-960-1.2717.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kainer, K. U., J. Schroder, and B. L. Mordike. "Powder Metallurgical Production of Whisker Reinforced Magnesium." In Developments in the Science and Technology of Composite Materials, 171–76. Dordrecht: Springer Netherlands, 1989. http://dx.doi.org/10.1007/978-94-009-1123-9_23.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Wong, Ka C. "From Angel Food Cake to Porous Titanium – A Novel Powder Metallurgical Approach for Metallic Foam Utilizing Food Processing and Ceramic Processing Techniques." In Materials Science Forum, 353–56. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-462-6.353.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Golden Renjith Nimal, R. J., M. Sivakumar, S. Arungalai Vendan, and G. Esakkimuthu. "Effect of Mechanical and Metallurgical Analysis of Magnesium and Aluminium Alloys Using Diffusion Bonding." In Advanced Manufacturing and Materials Science, 395–401. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-76276-0_40.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hayes, Peter C. "Reaction Mechanisms and Product Morphologies on Gaseous Reduction of Metal Compounds - Extractive Metallurgy Meets Materials Science." In 4th International Symposium on High-Temperature Metallurgical Processing, 75–86. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118663448.ch10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Chen, Shao Kai, C. F. Liu, Ping Xiang Zhang, and L. Zhou. "Influence of Processing Parameters on the Texture Formation in Powder Metallurgic Ni-5at.%W Substrate Tapes." In Materials Science Forum, 1997–2002. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-432-4.1997.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Metallurgical and Materials Science"

1

Fomenko, S., S. Tolendiuly, А. Akishev, A. Turan, and M. Almagambetov. "Study of physico-chemical properties of refractory materials synthesized from metallurgical waste." In PROCEEDINGS OF THE 11TH INTERNATIONAL ADVANCES IN APPLIED PHYSICS AND MATERIALS SCIENCE CONGRESS & EXHIBITION. AIP Publishing, 2023. http://dx.doi.org/10.1063/5.0143499.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Fomenko, S. M., S. Tolendiuly, A. Kh Akishev, M. Almagambetov, and R. Yeskendirov. "The technology for producing refractory products based metallurgical production waste." In PROCEEDINGS OF THE 10TH INTERNATIONAL ADVANCES IN APPLIED PHYSICS AND MATERIALS SCIENCE CONGRESS & EXHIBITION. AIP Publishing, 2021. http://dx.doi.org/10.1063/5.0058302.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kumar, Pushpinder, Ravinder Singh Joshi, and Rohit Kumar Singla. "Mechanical and Metallurgical Characterization of Ultrafine Grained Titanium Laminates Developed by LSEM." In ASME 2022 17th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/msec2022-85839.

Full text
Abstract:
Abstract Titanium alloy sheets find its broad use in the automotive, biomedical, and aerospace industries. One of the most demanding role of these sheets is in making of Ti/GFRP based stacked composites. Production of Titanium laminates for this application is difficult and expensive than other metals due to the challenges of multipass processing with intermediate annealing. In the present research work, ultrafine titanium laminates are fabricated through novel technique based on large strain extrusion machining in a single pass. Laminates were produced from Ti-6Al-4V and pure titanium (CP-Ti). Metallurgical characterization through SEM/XRD/EBSD analysis is performed to check the effects of different parameters on laminates properties. Mechanical testing is performed using vicker’s hardness tester. It is evident from the analysis that the hardness of laminates is increased by 25–52% as compared to the base materials. Changes in crystallite structure of the material with severe plastic deformation may have led to an increase in hardness of laminates. Scanning electron microscopy is used to see the topography of the surface, and roughness is measured using a roughness tester. Deformation in different laminates was analysed through X-ray diffraction. Electron backscatter diffraction (EBSD) was done on the sample to find the crystallographic information of the microstructure of laminates fabricated by large strain extrusion machining.
APA, Harvard, Vancouver, ISO, and other styles
4

Romashkov, Evgeniy, and Svetlana Krilova. "Scientifically based development of microalloyed steel for metallurgical tools operating under conditions of thermal shock-abrasive wear." In II INTERNATIONAL SCIENTIFIC AND PRACTICAL CONFERENCE “TECHNOLOGIES, MATERIALS SCIENCE AND ENGINEERING”. AIP Publishing, 2023. http://dx.doi.org/10.1063/5.0158386.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

"Preface: Proceedings of the 3rd International Conference on Materials and Metallurgical Engineering and Technology (ICOMMET 2017)." In PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON MATERIALS AND METALLURGICAL ENGINEERING AND TECHNOLOGY (ICOMMET 2017) : Advancing Innovation in Materials Science, Technology and Applications for Sustainable Future. Author(s), 2018. http://dx.doi.org/10.1063/1.5030221.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Somova, Yu V., T. V. Sviridova, S. V. Strelkov, V. S. Frolova, and E. A. Nekerov. "Oiled sludges of bottom sediments processing for rolling production of the metallurgical complex." In PROCEEDINGS OF THE III INTERNATIONAL CONFERENCE ON ADVANCED TECHNOLOGIES IN MATERIALS SCIENCE, MECHANICAL AND AUTOMATION ENGINEERING: MIP: Engineering-III – 2021. AIP Publishing, 2021. http://dx.doi.org/10.1063/5.0071853.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

"Program Committees: Proceedings of the 3rd International Conference on Materials and Metallurgical Engineering and Technology (ICOMMET 2017)." In PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON MATERIALS AND METALLURGICAL ENGINEERING AND TECHNOLOGY (ICOMMET 2017) : Advancing Innovation in Materials Science, Technology and Applications for Sustainable Future. Author(s), 2018. http://dx.doi.org/10.1063/1.5030222.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Miller, Scott. "Characterization of Material Transfer in Friction Stir Processing With a Consumable Tool." In ASME 2018 13th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/msec2018-6648.

Full text
Abstract:
This is a study of material transfer from a consumable tool to a substrate. The major advantage of this technique is material adheres by mechanical bonding at relatively low temperature, with potential benefits of high bonding strength, low temperature and thermal effects, high tolerance to contamination, environmentally benign, and low cost of materials, tooling, and process. There is an increasing need for dissimilar material surfacing and coating applications, leading to the study of the friction surfacing process. Friction surfacing experiments were done for depositing different materials to a steel substrate. Subsequent surface roughness and material analysis was done to characterize the nature of material transfer and adhesion to the substrate. The results suggest that friction stir processing by a consumable tool is capable of producing a smooth coating with good metallurgical properties.
APA, Harvard, Vancouver, ISO, and other styles
9

Zhukov, A. S., I. V. Shakirov, P. A. Kuznetcov, M. M. Sychev, S. V. Dyachenko, and L. A. Nefedova. "Comparison of the properties of additive materials obtained from sprayed powders of steels of various metallurgical production methods." In PROCEEDINGS OF THE III INTERNATIONAL CONFERENCE ON ADVANCED TECHNOLOGIES IN MATERIALS SCIENCE, MECHANICAL AND AUTOMATION ENGINEERING: MIP: Engineering-III – 2021. AIP Publishing, 2021. http://dx.doi.org/10.1063/5.0071253.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Tani, Giovanni, Alessandro Ascari, and Leonardo Orazi. "Metallurgical Phases Distribution Detection Through Image Analysis for Simulation of Laser Hardening of Carbon Steels." In ASME 2007 International Manufacturing Science and Engineering Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/msec2007-31071.

Full text
Abstract:
This paper deals with an original method for detecting the topological distribution of the ferrite and pearlite phases concerning a medium carbon hypo-eutectoid steel. Starting from a digital metallographic image a computation algorithm is applied to the pixel grid and a text array is generated reproducing the actual position of every phase into the bulk of the material. This result could be very useful to technological processes FEM simulators, where a good knowledge of the starting material is a required condition in order to obtain reliable and accurate results.
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Metallurgical and Materials Science"

1

Olivas, Jesus, and Joe Watts. LANL/UTEP Metallurgical Science Center of Excellence Planning. Office of Scientific and Technical Information (OSTI), August 2023. http://dx.doi.org/10.2172/1993213.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Meger, R. A. Railgun Materials Science. Fort Belvoir, VA: Defense Technical Information Center, January 2006. http://dx.doi.org/10.21236/ada521513.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Lesuer, D. R. Materials science and engineering. Office of Scientific and Technical Information (OSTI), January 1998. http://dx.doi.org/10.2172/15009526.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Lesuer, D. R. Materials Science and Engineering. Office of Scientific and Technical Information (OSTI), March 1993. http://dx.doi.org/10.2172/10194532.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Lesuer, D. R. Materials science and engineering. Office of Scientific and Technical Information (OSTI), February 1997. http://dx.doi.org/10.2172/623044.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Coverdale, R. Tate, Edward J. Garboczi, and Dale P. Bentz. Computational materials science of cement-based materials :. Gaithersburg, MD: National Bureau of Standards, 1993. http://dx.doi.org/10.6028/nist.tn.1405.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kippen, Karen E., and Deniece R. Korzekwa. MST-16: Nuclear Materials Science. Office of Scientific and Technical Information (OSTI), November 2013. http://dx.doi.org/10.2172/1107993.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Granick, Steve. Phospholipid Vesicles in Materials Science. Office of Scientific and Technical Information (OSTI), May 2016. http://dx.doi.org/10.2172/1252427.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Raj, Rishi. High Temperature Materials Processing Science. Fort Belvoir, VA: Defense Technical Information Center, June 1987. http://dx.doi.org/10.21236/ada182904.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Allocca, Clare, and Stephen Freiman. Materials Science and Engineering Laboratory :. Gaithersburg, MD: National Institute of Standards and Technology, 2005. http://dx.doi.org/10.6028/nist.ir.7130.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Metallurgical and Materials Science' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography