To see the other types of publications on this topic, follow the link: Metal Phosphate Porous Materials.
Dissertations / Theses on the topic 'Metal Phosphate Porous Materials'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 50 dissertations / theses for your research on the topic 'Metal Phosphate Porous Materials.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.
1
Yang, Zhu. "Preparation and Application of Hierarchically Porous Monolithic Materials with Embedded Nanoscale Interfaces." 京都大学 (Kyoto University), 2016. http://hdl.handle.net/2433/215332.
Full text
2
Wharmby, Michael T. "Synthesis of porous metal phosphonate frameworks for applications in gas separation and storage." Thesis, University of St Andrews, 2012. http://hdl.handle.net/10023/3450.
Full textAbstract:
Porous metal phosphonate framework materials were synthesised by solvothermal reaction of bis(α-aminomethylenephosphonic acid) ligands with divalent and trivalent metal cations. The syntheses and characterisation by NMR and, where possible, single crystal X-ray diffraction of seven bisphosphonic acid ligands, including N,N′-piperazinebis(methylenephosphonic acid) (H₄L), its racemic and enantiopure (R) 2-methyl (H₄L′ and R-H₄L′) and 2,5-dimethyl (H₄L′′) derivatives, and N,N′-4,4′-bipiperidinebis(methylenephosphonic acid) (H₄LL) are reported. Syntheses of the known phase Y₂(LH₂)₃·5H₂O and the new phases, STA-13(Y) (St Andrews microporous material No. 13) and Y₂(R-L′H₂)₃·4H₂O, from reactions of Y(AcO)₃ with H₄L, H₄L′ and R-H₄L′ respectively are reported. The as-prepared and dehydrated structures of each phase have been determined from either laboratory or synchrotron powder X-ray diffraction data. Reaction of Y(AcO)₃ and H₄L′′ is shown to form a phase with a different structure. The features determining which structure crystallises are discussed. Syntheses of other rare-earth forms of STA-13 (Sc³⁺, Gd³⁺–Yb³⁺) and the porosity of each phase to N₂ are reported. STA-13(Y) is the most porous form with loadings of ∼3 mmol g⁻¹ and ∼4 mmol g⁻¹ for N₂ and CO₂ respectively. MIL-91(Fe) was synthesised for the first time from reactions of Fe³⁺ cations with H₄L. Its structure was confirmed by Rietveld refinement, but it was not porous. The first syntheses of [Fe₄L₁.₅(AcO)₁.₅(OH,H₂O)₃]·0.5NH₄5.5H₂O (L= L or L′) are reported, from reactions of H₄L or H₄L′ in the presence of an excess of Fe³⁺ cations. The phase is related to a previously reported Co phase. The synthesis of divalent metal bisphosphonate STA-12(Mg) (Mg₂(H₂O)₂L·5.6H₂O) was reported for the first time and its structure determined from single crystal X-ray diffraction. The dehydration behaviour of this material was compared with the known forms of STA-12. STA-12(Mg) is porous to both N₂ (∼5.5 mmol g⁻¹) and CO₂ (~ 8.5 mmol g⁻¹). Reaction of H₄LL with Co²⁺ and Ni²⁺ gave two materials isoreticular with STA-12, labelled STA-16(Co) and STA-16(Ni). The structures of both materials were solved from synchrotron powder X-ray diffraction data. On dehydration, STA-16(Co) undergoes a reversible structural transition to an unknown structure. By contrast, STA-16(Ni) retains the same symmetry in the dehydrated form and its structure was determined from synchrotron powder X-ray diffraction data. Both materials are porous to N₂, with an uptake of up to 22.2 mmol g⁻¹, and CO₂ with maximum loading of 21.7 mmol g⁻¹. NLDFT analysis of N₂ adsorption data confirm the crystallographically determined pore radii. Syntheses of other frameworks with divalent cations and initial reactions of H₄LL with trivalent cations are also reported.
3
Su, Zixue. "Porous anodic metal oxides." Thesis, University of St Andrews, 2010. http://hdl.handle.net/10023/1019.
Full textAbstract:
An equifield strength model has been established to elucidate the formation mechanism for the highly ordered alumina pore arrays and titanium oxide nanotubular arrays prepared via a common electrochemical methodology, anodisation. The fundamentals of the equifield strength model was the equilibrium between the electric field driven oxidation rate of the metal and electric field enhanced dissolution rate of oxide. During the anodic oxidation of metal, pore initiation was believed to generate based on dissolution rate difference caused by inhomogeneity near the metal/oxide interface. The ionic nanoconvection driven by the electric force exerted on the space charge layer in the vicinity of electrolyte/oxide interface is established to be the main driving force of the pore ordering at the early stage of the anodisation. While the equifield strength requirement governs the following formation of the single pore and the self-ordering of random distributed pore arrays during the anodisation process. Hexagonal patterned Al2O3 nanopore arrays and TiO2 nanotubular arrays have been achieved by anodisation of corresponding metal substrates in proper electrolytes. The two characteristic microstructural features of anodic aluminium oxide (AAO) and anodic titanium oxide (ATO) were investigated using scanning electron microscopy (SEM) and high resolution transmission electron microscopy (HRTEM). The observations of the hemispherical electrolyte/oxide and oxide/metal interfaces, uniform thickness of the oxide layer, as well as self-adjustment of the pore size and pore ordering can be well explained by the equifield strength model. Field enhanced dissociation of water is extremely important in determination of the porosity of anodic metal oxide. The porosity of AAO and ATO films was found to be governed by the relative dissociation rate of water which is dependent on anodisation conditions, such as electrolyte, applied voltage, current density and electric field strength. Using an empirical method, the relations between the porosity of the AAO (ATO) films and the anodisation parameters, such as electric field strength, current density and applied voltage, have been established. Besides, the extent that an external electric field can facilitate the heterolytic dissociation of water molecule has been estimated using quantum-chemical model computations combined with the experimental aspect. With these achievements, the fabrication of anodic metal oxide films can be understood and controlled more precisely. Additionally, the impacts of other factors such as the electrolyte type and the temperature effect on the morphology of the anodic products were also investigated. Some important experimental evidences on the pore diameters variation with applied voltage in the anodisation of aluminium and the titanium were obtained for future investigation of the anodic metal oxide formation processes.
4
Zheng, Yu 1970. "Modelling of solidification of porous metal-hydrogen alloys." Thesis, Massachusetts Institute of Technology, 1995. http://hdl.handle.net/1721.1/37004.
Full text
5
Taksande, Kiran. "Exploration of the Ionic Conduction Properties of Porous MOF Materials." Thesis, Université de Montpellier (2022-….), 2022. http://www.theses.fr/2022UMONS010.
Full textAbstract:
Ce travail a pour objectif l’étude de matériaux hybrides poreux de type Metal-Organic Frameworks (MOFs) et d’un cristal moléculaire en tant que conducteurs ioniques solides pour des applications dans le domaine de l’énergie et de l’environnement. Dans le premier cas, nous avons développé diverses stratégies pour optimiser et contrôler la teneur en sites acides de Lewis et en porteurs de charges de deux séries de MOFs afin de concevoir des matériaux aux propriétés de conduction protonique très prometteuses. A partir d’une approche basée sur la substitution progressive des ligands par des entités fonctionnalisées présentant des sources de protons acides, nous avons créé une série de MOFs, MIP-207-(SO3H-IPA)x-(BTC)1–x, dont la teneur en groupements sulfoniques, par l’intermédiaire du ligand SO3H-IPA, est contrôlée à façon. Le meilleur matériau qui combine stabilité structurale et conduction protonique élevée présente des performances sous humidité parmi les plus intéressantes au sein de la famille des MOFs conducteurs protoniques (e.g., σ = 2.6 × 10–2 S cm–1 à 363 K/95% d’humidité relative (RH)). Selon une autre approche, nous avons étudié un MOF mésoporeux connu (MIL-101(Cr)-SO3H) dont les parois des pores sont tapissées de sites protoniques et qui contient dans ses pores un liquide ionique, le chlorure chlorure de 1-Ethyl-3-methylimidazolium (EMIMCl) capable d’assurer le transfert de proton. L’encapsulation du liquide ionique, caractérisée par une série d’outils expérimentaux (sorption de diazote, DRX sur poudre, TGA/MS, DSC et analyse élémentaire), s’avère particulièrement efficace pour exalter les propriétés de conduction protonique des composites à la fois à l’état anhydre (σ473 K = 1.5 × 10-3 S cm-1) mais également à l’état hydraté (σ(343 K/60%-80%RH) ≥ 0.10 S cm-1). Enfin, ce travail a été étendu à une autre famille de solides poreux, à travers l’étude des propriétés de conduction ionique d’un cristal moléculaire à base de zirconium (Zr-3) qui contient des paires ioniques KCl. Nous avons démontré que ZF-3 transite d’un comportement isolant à l’état anhydre (σ = 5.1 x 10-10 S cm-1 à 363 K/0% RH) vers un comportement super-conducteur ionique en présence d’eau (σ = 5.2 x 10-2 S cm-1 à 363 K/95 % RH), suite à l’augmentation de la dynamique de ions Cl- sous hydratation. Par ailleurs, des simulations moléculaires ont permis de décrire les mécanismes microscopiques à l’origine des propriétés de conduction des matériaux étudiés. Ces avancées devraient permettre de développer dans le futur de nouveaux matériaux performants dans le domaine de la conduction protonique et ioniqueThe conductivity performance of a new series of chemically stable proton conducting Metal Organic Frameworks (MOFs) as well as a superionic molecular crystal was explored. The contribution of this PhD was to (i) select a variety of architectures and functionalities of robust MOFs/superionic molecular solids and (ii) characterize and rationalize their conducting performance over various temperature/humidity conditions. We designed two series of MOFs to achieve promising proton-conducting performance, using distinct approaches to modulate the concentration of Brønsted acidic sites and charge carriers and further boost the conductivity properties. First, a multicomponent ligand replacement strategy was successfully employed to elaborate a series of multivariate sulfonic-based solids MIP-207-(SO3H-IPA)x-(BTC)1–x which combine structural integrity with high proton conductivity values (e.g., σ = 2.6 × 10–2 S cm–1 at 363 K/95% Relative Humidity -RH-). Secondly, a proton conducting composite was prepared through the impregnation of an ionic liquid (1-Ethyl-3-methylimidazolium chloride, EMIMCl) in the mesoporous MIL-101(Cr)-SO3H. The resulting composite displaying high thermal and chemical stability, exhibits outstanding proton conductivity not only at the anhydrous state (σ473 K = 1.5 × 10-3 S cm-1) but also under humidity (σ(343 K/60%-80%RH) ≥ 0.10 S cm-1) conditions. Finally, the ionic conducting properties of another class of porous solids, considering a zirconium-formate molecular solid containing KCl ion pairs (ZF-3) were explored. ZF-3 switches from an insulator (σ = 5.1 x 10-10 S cm-1 at 363 K/0% RH) to a superionic conductor upon hydration (σ = 5.2 x 10-2 S cm-1 at 363 K/95 % RH), in relation with the boost of Cl- dynamics upon water adsorption. Noteworthy, quantum- and force-field based simulations were combined with the experimental approach to elucidate the microscopic mechanisms at the origin of the ionic conducting properties of the studied materials. This fundamental knowledge will serve to create novel robust superionic conductors with outstanding performances that will pave the way towards appealing societal applications for clean energy production
6
Mu, Bin. "Synthesis and gas adsorption study of porous metal-organic framework materials." Diss., Georgia Institute of Technology, 2011. http://hdl.handle.net/1853/41097.
Full textAbstract:
Metal-organic frameworks (MOFs) or porous coordination polymers (PCPs) have become the focus of intense study over the past decade due to their potential for advancing a variety of applications including air purification, gas storage, adsorption separations, catalysis, gas sensing, drug delivery, and so on. These materials have some distinct advantages over traditional porous materials such as the well-defined structures, uniform pore sizes, chemically functionalized sorption sites, and potential for post-synthetic modification, etc. Thus, synthesis and adsorption studies of porous MOFs have increased substantially in recent years. Among various prospective applications, air purification is one of the most immediate concerns, which has urgent requirements to improve current nuclear, biological, and chemical (NBC) filters involving commercial and military purposes. Thus, the major goal of this funded project is to search, synthesize, and test these novel hybrid porous materials for adsorptive removal of toxic industrial chemicals (TICs) and chemical warfare agents (CWAs), and to install the benchmark for new-generation NBC filters. The objective of this study is three-fold: (i) Advance our understanding of coordination chemistry by synthesizing novel MOFs and characterizing these porous coordination polymers; (ii) Evaluate porous MOF materials for gas-adsorption applications including CO2 capture, CH4 storage, other light gas adsorption and separations, and examine the chemical and physical properties of these solid adsorbents including thermal stability and heat capacity of MOFs; (iii) Evaluate porous MOF materials for next-generation NBC filter media by adsorption breakthrough measurements of TICs on MOFs, and advance our understanding about structure-property relationships of these novel adsorbents.
7
Zhao, Yue. "Preparation and investigation of group 13 metal organo-phosphate hybrid-framework materials." Winston-Salem, NC : Wake Forest University, 2009. http://dspace.zsr.wfu.edu/jspui/handle/10339/42608.
Full textAbstract:
Thesis (Ph.D.)--Wake Forest University. Dept. of Chemistry, 2009.Title from electronic thesis title page. Thesis advisor: Abdessadek Lachgar. Vita. Includes bibliographical references (p. 140-156).
8
Mochizuki, Shuto. "Controlled radical polymerization in designed porous materials." Kyoto University, 2019. http://hdl.handle.net/2433/242535.
Full text
9
Annamalai, Perushini. "Electrospinning of porous composite materials for hydrogen storage application." University of the Western Cape, 2016. http://hdl.handle.net/11394/5654.
Full textAbstract:
>Magister Scientiae - MScDue to the rapid depletion of fossil fuel reserves and the production of environmentally harmful by-products such as carbon dioxide, there is an urgent need for alternate sustainable clean energy. One of the leading candidates in this endeavour is hydrogen, which can be used as an energy carrier since it has a high energy density, zero emissions and is produced from non-depletable resources such as water. The major challenge hindering a hydrogen economy is the lack of safe and effective storage technologies for mobile applications. A prospective solution to this problem lies in the use of porous powdered materials, which adsorb the hydrogen gas. However, the integration of these powdered materials into a storage tank system, results in the pipelines being contaminated during filling cycles. This necessitates the shaping of the porous powdered materials. Among the many shaping techniques available, the electrospinning technique has been proposed as a promising technology since it is a versatile process that is easily scaled-up making it attractive for the applications of the study. Furthermore, the electrospinning process enables the synthesis of nano-sized fibres with attractive hydrogen sorption characteristics. In this regard, the current study employs the electrospinning technique to synthesise electrospun composite fibres for mobile hydrogen storage applications. After electrospinning three polymers, polyacrylonitrile (PAN) was selected as the most suitable polymer because it yielded bead-free electrospun fibres. However, the diameter of the PAN fibres was large/thick which prompted further optimisation of the electrospinning parameters. The optimised electrospinning conditions that yield unbeaded fibres within the desired diameter range (of 300-500 nm) were a PAN concentration of 10 wt%, a flow rate of 0.4 mL/h, a distance of 10 cm between the needle tip and collector plate, and an applied voltage of 8 kV. The study then progressed to the synthesis and characterisation of the pristine porous powdered materials which adsorb hydrogen gas. The porous powdered materials investigated were commercial zeolite 13X, its synthesised templated carbon derivative (ZTC) and Zr (UiO-66) and Cr (MIL-101) based metal-organic frameworks (MOFs). ZTC was synthesised via liquid impregnation coupled with chemical vapour deposition (CVD), and the MOFs were synthesised by the modulated solvothermal method. Analysis of the ZTCs morphology and phase crystallinity show that the carbon templated process using zeolites was successful, however, ZTC was amorphous compared to crystalline zeolite template. The BET surface area was assessed with the aid of nitrogen sorption isotherms for both zeolite 13X and ZTC, and values of 730 and 2717 m²/g, respectively were obtained. The hydrogen adsorption capacity for zeolite 13X was 1.6 wt% and increased to 2.4 wt% in the ZTC material at 77 K and 1 bar. The successful synthesis of well defined, crystalline MOFs was evident from X-ray diffraction and morphological analysis. The BET surface area and hydrogen adsorption for Zr MOF were 1186 m²/g and 1.5 wt%, respectively at 77 K and 1 bar. Cr MOF had a BET surface area of 2618 m²/g and hydrogen adsorption capacity of 1.9 wt% at 77 K and 1 bar. The main focus of the study was to synthesise electrospun composite fibres that can adsorb hydrogen gas and thus provide significant insight in this field of research. As such it examined composite fibres that incorporates porous powdered materials such as zeolite 13X, ZTCs, UiO-66 (Zr) MOF and MIL-101 (Cr) MOF and investigated their ability to adsorb hydrogen gas, which have not been reported previously. The synthesis of composite fibres was achieved by incorporating the porous powdered materials into the PAN resulting in a polymeric blend that was then electrospun. Morphological analysis illustrated that the porous powdered materials were successfully supported by or incorporated within the PAN fibres, forming composite fibres. The BET surface area of the 40 wt% zeolite-PAN and 12.5 wt% ZTC-PAN composite fibres were 440 and 1787 m²/g respectively. Zr MOF and Cr MOF composite fibres had a BET surface area of 815 and 1134 m²/g, respectively. The BET surface area had reduced by 40, 34, 31 and 57% for zeolite 13X, ZTC, Zr MOF and Cr MOF, respectively after these porous powdered materials were incorporated into PAN. The hydrogen adoption capacity for 40 wt% zeolite-PAN, 12.5 wt% ZTC-PAN, 20 wt% Zr MOFPAN and 20 wt% Cr MOF-PAN composite fibres was 0.8, 1.8, 0.9 and 1.1 wt%, respectively. This decrease was attributed to the limited amount of porous powdered materials that could be incorporated into the fibres since only 40 wt% of zeolite 13X, 12.5 wt% of ZTC and 20 wt% of the MOFs were loaded into their respective composite fibres. This was due to the fact that incorporation of greater amounts of porous powdered materials resulted in a viscous polymeric blend that was unable to be electrospun. It is evident from the study that electrospinning is a versatile process that is able to produce composite fibres with promising properties that can potentially advance the research in this field thus providing a practical solution to the problem of integrating loose powdered materials into an on-board hydrogen storage system.
CSIR Young Researchers Establishment Fund (YREF)
10
Taksande, Kiran. "Exploration of the Ionic Conduction Properties of Porous MOF Materials." Thesis, Montpellier, 2022. https://ged.scdi-montpellier.fr/florabium/jsp/nnt.jsp?nnt=2022UMONS010.
Full textAbstract:
Ce travail a pour objectif l’étude de matériaux hybrides poreux de type Metal-Organic Frameworks (MOFs) et d’un cristal moléculaire en tant que conducteurs ioniques solides pour des applications dans le domaine de l’énergie et de l’environnement. Dans le premier cas, nous avons développé diverses stratégies pour optimiser et contrôler la teneur en sites acides de Lewis et en porteurs de charges de deux séries de MOFs afin de concevoir des matériaux aux propriétés de conduction protonique très prometteuses. A partir d’une approche basée sur la substitution progressive des ligands par des entités fonctionnalisées présentant des sources de protons acides, nous avons créé une série de MOFs, MIP-207-(SO3H-IPA)x-(BTC)1–x, dont la teneur en groupements sulfoniques, par l’intermédiaire du ligand SO3H-IPA, est contrôlée à façon. Le meilleur matériau qui combine stabilité structurale et conduction protonique élevée présente des performances sous humidité parmi les plus intéressantes au sein de la famille des MOFs conducteurs protoniques (e.g., σ = 2.6 × 10–2 S cm–1 à 363 K/95% d’humidité relative (RH)). Selon une autre approche, nous avons étudié un MOF mésoporeux connu (MIL-101(Cr)-SO3H) dont les parois des pores sont tapissées de sites protoniques et qui contient dans ses pores un liquide ionique, le chlorure chlorure de 1-Ethyl-3-methylimidazolium (EMIMCl) capable d’assurer le transfert de proton. L’encapsulation du liquide ionique, caractérisée par une série d’outils expérimentaux (sorption de diazote, DRX sur poudre, TGA/MS, DSC et analyse élémentaire), s’avère particulièrement efficace pour exalter les propriétés de conduction protonique des composites à la fois à l’état anhydre (σ473 K = 1.5 × 10-3 S cm-1) mais également à l’état hydraté (σ(343 K/60%-80%RH) ≥ 0.10 S cm-1). Enfin, ce travail a été étendu à une autre famille de solides poreux, à travers l’étude des propriétés de conduction ionique d’un cristal moléculaire à base de zirconium (Zr-3) qui contient des paires ioniques KCl. Nous avons démontré que ZF-3 transite d’un comportement isolant à l’état anhydre (σ = 5.1 x 10-10 S cm-1 à 363 K/0% RH) vers un comportement super-conducteur ionique en présence d’eau (σ = 5.2 x 10-2 S cm-1 à 363 K/95 % RH), suite à l’augmentation de la dynamique de ions Cl- sous hydratation. Par ailleurs, des simulations moléculaires ont permis de décrire les mécanismes microscopiques à l’origine des propriétés de conduction des matériaux étudiés. Ces avancées devraient permettre de développer dans le futur de nouveaux matériaux performants dans le domaine de la conduction protonique et ioniqueThe conductivity performance of a new series of chemically stable proton conducting Metal Organic Frameworks (MOFs) as well as a superionic molecular crystal was explored. The contribution of this PhD was to (i) select a variety of architectures and functionalities of robust MOFs/superionic molecular solids and (ii) characterize and rationalize their conducting performance over various temperature/humidity conditions. We designed two series of MOFs to achieve promising proton-conducting performance, using distinct approaches to modulate the concentration of Brønsted acidic sites and charge carriers and further boost the conductivity properties. First, a multicomponent ligand replacement strategy was successfully employed to elaborate a series of multivariate sulfonic-based solids MIP-207-(SO3H-IPA)x-(BTC)1–x which combine structural integrity with high proton conductivity values (e.g., σ = 2.6 × 10–2 S cm–1 at 363 K/95% Relative Humidity -RH-). Secondly, a proton conducting composite was prepared through the impregnation of an ionic liquid (1-Ethyl-3-methylimidazolium chloride, EMIMCl) in the mesoporous MIL-101(Cr)-SO3H. The resulting composite displaying high thermal and chemical stability, exhibits outstanding proton conductivity not only at the anhydrous state (σ473 K = 1.5 × 10-3 S cm-1) but also under humidity (σ(343 K/60%-80%RH) ≥ 0.10 S cm-1) conditions. Finally, the ionic conducting properties of another class of porous solids, considering a zirconium-formate molecular solid containing KCl ion pairs (ZF-3) were explored. ZF-3 switches from an insulator (σ = 5.1 x 10-10 S cm-1 at 363 K/0% RH) to a superionic conductor upon hydration (σ = 5.2 x 10-2 S cm-1 at 363 K/95 % RH), in relation with the boost of Cl- dynamics upon water adsorption. Noteworthy, quantum- and force-field based simulations were combined with the experimental approach to elucidate the microscopic mechanisms at the origin of the ionic conducting properties of the studied materials. This fundamental knowledge will serve to create novel robust superionic conductors with outstanding performances that will pave the way towards appealing societal applications for clean energy production
11
Batisai, Eustina. "Synthesis and sorption studies of porous metal-organic hosts." Thesis, Stellenbosch : Stellenbosch University, 2013. http://hdl.handle.net/10019.1/79803.
Full textAbstract:
Thesis (PhD)--Stellenbosch University, 2013.ENGLISH ABSTRACT: The first part of this study describes the synthesis of new porous materials from basic building blocks. Five structurally related ligands namely: N,N'-bis(3-pyridylmethyl)-naphthalene diimide (L1), N,N'-bis(4-pyridylmethyl)-naphthalene diimide (L2), N,N'-bis(4-pyridylmethyl)- pyromellitic diimide (L3), N,N'-bis(3-pyridylmethyl)-pyromellitic diimide (L4) and 2-(pyridin-4- ylmethyl)-benzene tricarboxylic anhydride (L5) were synthesised. Ligands L1 and L2 were reacted with metal nitrates and carboxylates as co-ligands in a systematic manner with a view to obtaining potentially porous 3–D coordination polymers. Ten structurally diverse coordination polymers were obtained and they were characterised by single-crystal X-ray diffraction, powder X-ray diffraction and thermogravimetric analysis. Four of these compounds absorb moderate amounts of CO2 and, in addition, show sorption selectivity towards CO2 over N2. The reaction of L3 and L4 with transition metal halides yielded two 1–D chains, while the reaction of L5 with transition metal nitrates yielded seven coordination polymers of which four are 2–D and three are 1–D. Of the 2–D structures three are isostructural. The second part of this work describes a variable pressure study of a flexible metal-organic framework [Zn2(BDC)2(BPY)] (BPY = 4,4 -bipyridine and BDC = 1,4-benzene dicarboxylic acid). [Zn2(BDC)2(BPY)] is one of the few examples of a flexible metal-organic framework that undergoes phase transformations in response to gas pressure. The high pressure sorption recorded for this metal-organic framework displays two inflection steps in the pressure range 0 to 30 bar, possibly indicating two phase transformations. The gas-loaded structures for each phase transformation were determined by means of single-crystal X-ray diffraction. High-pressure differential scanning calorimetry was also carried out on the system in order to determine accurate gate-opening pressures, as well as the energies involved with each phase transformation. The results correlate with those obtained from single-crystal X-ray diffraction and high-pressure sorption. The final section reports the mechanochemical synthesis of two Werner complexes [NiCl2(4- PhPy)4] (1), [CoCl2(4-PhPy)4] (2) and their corresponding solid solution [Ni0.5Co0.5Cl2(4-PhPy)4] (3) (PhPy = phenyl pyridine). The solid solution could only be formed by mechanochemical synthesis and not by conventional solution crystallisation methods. The solid solution exhibits sorption properties that differ from those of the pure compounds.
AFRIKAANSE OPSOMMING: Die eerste deel van hierdie studie beskryf die sintese van nuwe poreuse stowwe uit basiese boublokke. Vyf struktureel verwante ligande naamlik: N,N'-bis(3-piridielmetiel)-naftaleen diimied (L1), N,N'-bis(4-piridielmetiel)-naftaleen diimied (L2), N,N'-bis(4-piridielmetiel)- piromellitien diimied (L3), N,N'-bis(3-piridielmetiel)-piromellitien diimied (L4) en 2-(piridiel-4- ielmetiel)benseen trianhidried (L5) is gesintetiseer. Ligande L1 en L2 is gereageer met metaal nitrate en karboksielsure as mede-ligande in 'n sistematiese wyse met 'n oog op die verkryging van potensieel poreuse 3–D koördinasie polimere. Tien struktureel diverse koördinasie polimere is verkry en hulle is gekarakteriseer deur enkel-kristal X-straal-diffraksie, poeier X-straal diffraksie en termo-analise (thermal analysis). Vier van hierdie verbindings het matige hoeveelhede CO2 geabsorbeer en, bykomend, wys sorpsie selektiwiteit van CO2 oor N2. Die reaksie van L3 en L4 met oorgangsmetaalhaliede het twee 1–D kettings gevorm, terwyl die reaksie van L5 met oorgangsmetaal nitrate sewe koördinasie polimere opgelewer het, waarvan vier 2–D en drie 1–D polimere is. Van die 2–D polimere het drie vergelykbare strukture. Die tweede deel van hierdie werk beskryf 'n veranderlike druk studie van 'n buigsame metaalorganiese raamwerk [Zn2(BDC)2(BPY)] (BPY = 4,4-bipiridien en BDC = 1,4-benseen dikarboksielsuur). [Zn2(BDC)2(BPY)] is een van die min voorbeelde van 'n buigsame metaalorganiese raamwerk wat fase transformasies (phase transformations) ondergaan in respons op ‘n verandering in gas druk. Die hoë-druk sorpsie aangeteken vir hierdie metaal-organiese raamwerk vertoon twee infleksie stappe in die gebestudeerde druk gebied (0 tot 30 bar), wat moontlik op twee fase transformasies dui. Die gas-gelaaide strukture vir elke fase transformasie is bepaal deur middel van enkel-kristal X-straal-diffraksie. Hoë-druk differensiële skandeer kalorimetrie (differential scanning calorimetry) is ook uitgevoer op die stelsel ten einde dié akkurate hekopenings druk, sowel as die energie betrokke by elke fase transformasie te bepaal. Die resultate stem ooreen met dié verkry vanaf enkel-kristal X-straal diffraksie en hoë-druk sorpsie. Die finale afdeling bespreek die meganochemiese sintese van twee Werner komplekse [NiCl2(4-PhPy)4] (1) en [COCl2(4-PhPy)4] (2) en hul ooreenstemmende vaste oplossing (solid solution) [Ni0.5Co0.5Cl2(4-PhPy)4] (3). Die vaste oplossing kan slegs gevorm word deur meganochemiese sintese en nie deur konvensionele oplossing kristallisasie metodes. Die vaste oplossing vertoon sorpsie eienskappe wat verskil van dié van die suiwer verbindings.
12
Yigit, Mehmet Veysel. "Design of open hydrogen-bonded frameworks using bis(imidazolium 2,4,6-pyridinetricarboxylate)metal complexes as secondary building units." Link to electronic thesis, 2003. http://www.wpi.edu/Pubs/ETD/Available/etd-0514103-110657.
Full text
13
Liu, Leifeng. "Inorganic and Metal-Organic Framework Materials : Synthesis and structure characterization." Doctoral thesis, Stockholms universitet, Institutionen för material- och miljökemi (MMK), 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:su:diva-102816.
Full textAbstract:
Inorganic and metal-organic framework materials possessing accessible and permanent pores are receiving tremendous attention. Among them, zeolites are the most famous class due to their wide applications on petrochemistry and gas separation. Besides zeolites, the other oxide framework materials are also intensively investigated because of their diverse structures and compositions. Metal-organic frameworks are built from metal clusters and organic linkers. By rational designing the reagent, the network with desired topology and functionality can be synthesized. For all of the framework materials mentioned above, to explore novel framework structures is important for improving properties and discovering new applications. This thesis includes the synthesis of zeolites and structure characterization for various types of inorganic framework materials. The zeolite synthesis conditions was exploited. With the optimized condition, the zeolite ITQ-33 was synthesized as single crystals. From the single crystal X-ray diffraction data, the disorder in the structure is discovered and explained. Following the topic of disorder and twinning, we proposed a novel method of solving structure of pseudo-merohedric twinning crystal by using an example of a metal-organic complex crystal. Then we also showed methods for solving structures of high complexity and nano-crystal by using mainly powder X-ray diffraction and transmission electron microscopy. Four examples were shown in chapter 4 including open-framework germanates and metal-organic frameworks.At the time of the doctoral defence the following paper was unpublished and a status as follows: Paper 4: Manuscript
14
Al-Janabi, Nadeen. "Engineering novel porous materials for carbon capture and storage." Thesis, University of Manchester, 2017. https://www.research.manchester.ac.uk/portal/en/theses/engineering-novel-porous-materials-for-carbon-capture-and-storage(919c4243-ed8d-4a6b-9207-43c6a2c62637).html.
Full textAbstract:
Global warming along with the climate change derived from the World's demand for energy are among the greatest challenges to our society. To tackle climate change issue, research must focus on proposing practical approaches for carbon emissions reduction and environmental remediation. This thesis focuses on carbon dioxide separation mainly from flue gases (major sources of carbon dioxide emissions) using metal organic frameworks (MOFs) to reduce its impact on the global warming hence the climate change. MOFs are a class of crystalline porous adsorbents with structures that attract CO2 selectively and store it in their porous frameworks. Over the course of this PhD research, the fundamental aspects of these materials, as well as their practical applications, have been investigated. For example, the synthesis recipe of copper (II) benzene-1,3,5-tricarboxylate (CuBTC) MOF was improved to deliver a product of high yield ( > 89%) and free of by-product. Also, a mechanism study on the hydrothermal stability CuBTC MOF was carried out under simulated flue gas conditions and delivered the first experimental proof of the decomposition mechanism of CuBTC MOF caused by the water vapour. The fundamental understanding of the stability of materials then motivated the research into the development of a facile method of using an economic functional dopant (i.e. glycine) to strengthen the structure of CuBTC MOF (completely stable towards water vapour), as well as to improve the selectivity of resulting materials to CO2 (by 15% in comparison to the original CuBTC MOF). The suitability of the CuBTC MOF for fixed bed adsorption processes was also assessed using a combined experimental and process simulation method. In addition to the experimental approaches, molecular simulation based on grand canonical Monte Carlo method was also used to understand the effect of structural defects of MOFs on the CO2 adsorption isotherms.
15
Deshpande, Atul Suresh. "Fabrication of porous metal oxides for catalytic application using templating techniques." Phd thesis, Universität Potsdam, 2004. http://opus.kobv.de/ubp/volltexte/2005/112/.
Full textAbstract:
Nanostrukturierte Materialien zeichnen sich dadurch aus, dass sie aus sehr kleinen Baueinheiten zusammengesetzt sind. Typischerweise liegt die Grössenordnung dieser Bausteine im Bereich von einigen Nanometern. Ein Nanometer entspricht 10-9 Meter. Dadurch bekommen nanostrukturierte Materialien oft verbesserte, vielfach sogar ganz neue Eigenschaften, die für viele heutige wie auch zukünftige Anwendungen von Vorteil sind.Ein Weg, um solche nanostrukturierte Materialien herzustellen, ist die sogenannte „Templatierungsmethode“. Das Templat besteht aus einem einzelnen Molekül, einer Ansammlung von Molekülen oder aus einem festen Objekt. Beim Aufbau des nanostrukturierten Materials wirkt das Templat als Schablone oder als Gussform und beeinflusst damit die Struktur des Endproduktes. Normalerweise besteht dieser Prozess aus mehreren Schritten. Zuerst wird der Raum um das Templat mit dem Ausgangsstoff umhüllt oder ausgefüllt, dann wird der Ausgangsstoff chemisch in das gewünschte Endprodukt umgewandelt, wobei das Templat die Endform kontrolliert und am Schluss wird das Templat entfernt. Das geschieht meistens durch Erhitzen. Als Ausgangsstoff können dabei einzelne Moleküle verwendet werden, die sich leicht in das Endprodukt umwandeln lassen, oder aber vorgeformte Partikelchen, die nur noch zur entsprechenden Form angeordnet werden müssen.
In dieser Arbeit wurden poröse Metalloxid-Kügelchen hergestellt, die aus einem Gemisch aus Titanoxid und entweder Aluminium-, Gallium- oder Indiumoxid bestehen. Als Template wurden poröse Kunststoffkügelchen eingesetzt, die man sonst für Chromatographiezwecke braucht. Bei der Synthese wurden die Poren der Kunststoffkügelchen mit dem Ausgangsmaterial gefüllt und mit Wasser in ein amorphes Netzwerk umgewandelt. Danach werden die Kügelchen erhitzt, wobei das Kunststofftemplat zersetzt wird. Gleichzeitig wird das amorphe Gerüst in stabile, kristalline Wände umgewandelt, die die Form der Kügelchen auch dann noch behalten, wenn das Templat verschwunden ist. Mit einem ähnlichen Prozess wurden auch Kügelchen aus Cer-Zirkonoxid erhalten. Als Ausgangsstoff wurden dabei aber vorgeformte Cer-Zirkonoxid-Nanopartikel eingesetzt, die in die Poren der Kunststofftemplatkügelchen hinein diffundieren. Diese Cer-Zirkonoxid-Nanopartikel lassen sich auch für die Herstellung von porösen Pulvern verwenden, wobei dann nicht Polymerkügelchen, sondern hochgeordnete Ansammlungen von Block Copolymeren als Template verwendet werden.
Form, Struktur und Eigenschaften all dieser Materialien wurden systematisch unter Anwendung verschiedenster Analysemethoden untersucht. Die auf Titanoxid-basierten Kügelchen wurden auch auf ihre photokatalytische Verwendung zum Abbau von umweltschädlichem 2-Chlorophenol untersucht. Die Cer-Zirkonoxid-Kügelchen wurden für die Herstellung von Wasserstoff aus Methanol getestet. Wasserstoff gilt als hoffungsvoller, sauberer Energieträger der Zukunft und kommt in Brennstoffzellen zum Einsatz.
Nanostructured materials are the materials having structural features on the scale of nanometers i.e. 10-9 m. the structural features can enhance the natural properties of the materials or induce additional properties, which are useful for day to technology as well as the future technologies
One way to synthesize nanostructured materials is using templating techniques. The templating process involves use of a certain “mould” or “scaffold” to generate the structure. The mould is called as the template, can be a single molecule or assembly of molecule or a larger object, which has its own structure. The product material can be obtained by filling the space around the template with a “precursor”, transformation of precursor into the desired material and then removal of template to get product. The precursor can be any chemical moiety that can be easily transformed in to the desired material. Alternatively the desired material is processed into very tiny bricks or “nano building blocks (NBB)” and the product is obtained by arrangement of the NBB by using a scaffold.
We synthesized porous metal oxide spheres of namely TiO2-M2O3: titanium dioxide- M-oxide (M = aluminum, gallium and indium) TiO2-M2O3 and cerium oxide-zirconium oxide solid solution. We used porous polymeric beads as templates. These beads used for chromatographic purposes. For the synthesis of TiO2-M2O3 we used metal- alkoxides as precursor. The pore of beads were filled with precursor and then reacted with water to give transformation of the precursor to amorphous oxide network. The network is crystallized and template is removed by heat treatment at high temperatures. In a similar way we obtained porous spheres of CexZr1-xO2. For this we synthesized nanoparticle of CexZr1-xO2 and used then for the templating process to obtain porous CexZr1-xO2 spheres.
Additionally, using the same nanoparticles we synthesized nano-porous powder using self-assembly process between a block-copolymers scaffold and nanoparticles.
Morphological and physico-chemical properties of these materials were studies systematically by using various analytical techniques
TiO2-M2O3 material were tested for photocatalytic degradation of 2-Chlorophenol a poisonous pollutant. While CexZr1-xO2 spheres were tested for methanol steam reforming reaction to generate hydrogen, which is a fuel for future generation power sources like fuel cells. All the materials showed good catalytic performance.
16
Silva, Manuel António Martins da. "Chemical preparation and properties of calcium phosphate based materials for biomedical applications." Master's thesis, Universidade de Aveiro, 2004. http://hdl.handle.net/10773/17672.
Full textAbstract:
Mestrado em Ciência e Engenharia de MateriaisCalcium phosphate-based materials, in particular hydroxyapatite-based ones,are among the most important materials for biomedical applications (bone graftsubstitutes, drug delivery systems, etc.). Owing to their compositional similaritywith respect to hard tissues, these materials show superior bioactive,osteoconductive, cell seeding and growth environment properties. Additionally,their capability to adsorb biological important substances like proteins, drugs,etc. makes them interesting materials to be used as drug delivery systems. Several studies on the effects of morphological aspects like particle size,shape, pore size and pore volume on the biological behaviour of calciumphosphate-based materials have shown that the properties of these materialscannot be considered merely on compositional aspects, but the role ofmorphological issues must also be taken into consideration. In the present work, calcium phosphate particles with a wide range of sizeswere produced by precipitation in calcium/citrate/phosphate solutions. It wasobserved that the manipulation of experimental conditions, namely the citrate-calcium ratio (Cit/Ca) and the pH of the solution, allowed to producehydroxyapatite particles either as nanosized particles, either as micrometricsized aggregates with particular shapes. The different sizes and shapes wereanalyzed in the framework of nucleation and growth phenomena and henceattributed to the development of different particle surface charge conditionsrelated to the adsorption of differently charged citrate species. The study of the preparation of calcium phosphate porous granules by spraydrying the suspensions of the various precipitated hydroxyapatite particles wasalso undertaken in the present work. The obtained results showed that thedifferent morphologies of the suspended hydroxyapatite particles havesignificant effects on the spray dried granules’ morphology and microstructure,thus accounting for different pore size and pore size distributions. Moreover,the study of the spray dried granules heat treatment demonstrated that not onlythe granules’porosity may be further modified but also its crystal phasecomposition. In view of the potential applications of the porous materialsprepared in this work such as drug, growth factors and stem cells carriers or aspromoter of cell adhesion, the present study points out to a wide range ofpossibilities for producing calcium phosphate porous granules with a differentschedule of morphological characteristics.
Os materiais fosfo-cálcicos, particularmente aqueles à base de hidroxiapatite, são dos mais importantes para aplicações biomédicas, como por exemplo, a substituição óssea e os sistemas de libertação controlada de fármacos. Este facto deve-se principalmente à semelhança da sua composição com a parte inorgânica do tecido ósseo. É esta semelhança que está na origem dasnotáveis propriedades biológicas destes materiais, tais como: excelente bioactividade e osteoconductividade. Por outro lado, estes materiais possuem ainda a capacidade de adsorver substâncias com interesse biológico,(proteínas, drogas, etc.) o que os torna interessantes como sistemas delibertação controlada de fármacos. No entanto, alguns estudos têmdemonstrado que o comportamento biológico dos materiais fosfo-cálcicos não depende apenas da sua composição mas também de aspectos morfológicos, tais como: tamanho e forma departícula, tamanho e volume de poro, etc. No presente trabalho produziram-se, por precipitação a partir de soluções de cálcio/citrato/fosfato, partículas de fosfato de cálcio com uma grandediversidade de tamanhos. Observou-se que a manipulação das condiçõesexperimentais, nomeadamente a razão citrato/cálcio (Cit/Ca) e o pH dasolução, possibilitaram a produção de partículas de hidroxiapatite, quer na forma de partículas com tamanhos nanométricos, quer na forma de agregados micrométricos com formas peculiares. A variedade de tamanhos e formas daspartículas produzidas foi analisado no contexto dos fenómenos de nucleação e crescimento, tendo sido atribuídaao desenvolvimento de diferentes condições de carga superficial devidas à adsorção de espécies iónicas de citrato com diferentes cargas. No presente trabalho desenvolveu-se também o estudo da preparação de grânulos porosos de fosfato de cálcio, por atomização de suspensões de partículas de hidroxiapatite com diferentes morfologias. Os resultados obtidosmostraram que a utilização de partículas com diferentes morfologias influenciasignificativamente a morfologia e microestrutura dos grânulos atomizados, oque origina grânulos com diferentes tamanhos e distribuição de tamanho deporos. Além disso, demonstrou-se que o tratamento térmico permite modificar não só a porosidade dos grânulos, mas também a sua composição cristalina.Tendo em vista as potenciais aplicações dos materiais porosos preparadosneste trabalho, tais como sistemas de libertação controlada de fármacos,factores de crescimento e de células estaminais ou como promotores daadesão de células, o presente trabalho sugere a possibilidade de produção de grânulos de fosfato de cálcio com uma vasta multiplicidade de características morfológicas.
17
Ko, Ying-hsiang. "The growth of metal particles in porous glass and the dielectric and optical properties of the composites /." The Ohio State University, 1986. http://rave.ohiolink.edu/etdc/view?acc_num=osu1487267024996737.
Full text
18
Dawson, Daniel M. "Combined theoretical and experimental investigations of porous crystalline materials." Thesis, University of St Andrews, 2014. http://hdl.handle.net/10023/7053.
Full textAbstract:
This thesis combines solid-state nuclear magnetic resonance (NMR) spectroscopy, X-ray diffraction (XRD), chemical synthesis, isotopic enrichment and density-functional theory (DFT) calculations to provide insight into a number of microporous materials. The first class of materials studied is metal-organic frameworks (MOFs), where the presence of paramagnetic ions has a range of effects on the ¹³C NMR spectra, depending on the nature of the ligand-metal interactions. For the Cu²⁺-based MOFs, HKUST-1 and STAM-1, the assignment of the NMR spectra is non-intuitive, and unambiguous assignment requires specific ¹³C labelling of the organic linker species. It is shown that ¹³C NMR spectra of these two MOFs could act as a sensitive probe of the nature of “guest” molecules bound to the Cu²⁺. The second class of materials is aluminophosphates (AlPOs). It is shown that, using a series of relatively simple linear relationships with the crystal structure, the NMR parameters calculated by DFT (with calculation times of several hours) can be predicted, often with experimentally-useful accuracy, in a matter of seconds using the DIStortion analysis COde (DISCO), which is introduced here. The ambient hydration of the AlPO, JDF-2, to AlPO-53(A) is shown to occur slowly, with incomplete hydration after ~3 months. The resulting AlPO-53(A) is disordered and some possible models for this disorder are investigated by DFT. The final class of materials is gallophosphates (GaPOs), particularly GaPO-34 and related materials. The two as-prepared forms of GaPO-34 are characterised by solid-state NMR, and their calcination investigated by TGA and in-situ powder XRD. An unusual dehydrofluorinated intermediate phase is isolated and characterised for the first time by solid-state NMR. The fully calcined material is shown to be stable under anhydrous conditions, but hydrates rapidly in air. The hydrated material is stable under ambient conditions, but collapses upon heating. Partial dehydration without collapse is achieved by gentle heating or room-temperature evacuation. The impurity phases, GaPO₄ berlinite and GaPO-X are investigated by solid-state NMR and, while the structure of GaPO-X remains unknown, much structural information is obtained.
19
Wollmann, Philipp, Matthias Leistner, Ulrich Stoeck, Ronny Grünker, Kristina Gedrich, Nicole Klein, Oliver Throl, et al. "High-throughput screening: speeding up porous materials discovery." Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2014. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-138648.
Full textAbstract:
A new tool (Infrasorb-12) for the screening of porosity is described, identifying high surface area materials in a very short time with high accuracy. Further, an example for the application of the tool in the discovery of new cobalt-based metal–organic frameworks is givenDieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich
20
Brunet, Gabriel. "Molecular Engineering of Metal-Organic Assemblies: Advances Toward Next Generation Porous and Magnetic Materials." Thesis, Université d'Ottawa / University of Ottawa, 2020. http://hdl.handle.net/10393/40385.
Full textAbstract:
The controlled assembly of molecular building blocks is an emerging strategy that allows for the preparation of materials with tailor-made properties. This involves the precise combination of molecular subunits that interact with one another via specifically designed reactive sites. Such a strategy has produced materials exhibiting remarkable properties, including those based on metal-organic frameworks and single-molecule magnets. The present Thesis aims to highlight how such metal-organic assemblies can be engineered at the molecular level to promote certain desired functionalities. Specifically, Chapter 2 will focus on the confinement effects of a crystalline sponge on a ferrocene-based guest molecule that is nanostructured within the porous cavities of a host material. In doing so, we evaluate how one can exert some level of control over the binding sites of the guest molecule, through the addition of electron-withdrawing groups, as well as tuning the physical properties of the guest itself through molecular encapsulation. Notably, we demonstrate a distinct change in the dynamic rotational motion of the ferrocene molecules once confined within the crystalline sponge. In Chapter 3, we investigate the generation of slow relaxation of the magnetization from a Co(II)-based metal-organic framework. We compare this to a closely related 2D Co(II) sheet network, and how slight changes in the crystal field, probed through computational methods, can impact the magnetic behaviour. This type of study may be particularly beneficial in the optimization of single-ion magnets, by sequestering metal centres in select chemical environments, and minimizing molecular vibrations that may offer alternative magnetic relaxation pathways.
We extend these principles in Chapter 4, through the use of a nitrogen-rich ligand that acts as a scaffold for Ln(III) ions, thereby yielding 0D and 1D architectures. The coordination chemistry of Ln(III) ions with N-donor ligands remains scarce, especially when evaluated from a magnetic perspective, and therefore, we sought to determine the magnetic behaviour of such compounds. The monomeric unit displays clear single-molecule magnet behaviour with an energetic barrier for the reversal of the magnetization, while the 1D chain displays weaker magnetic characteristics. Nevertheless, such compounds incorporating nitrogen-rich ligands offer much promise in the design of environmentally-friendly energetic materials. In Chapter 5, we take a look at different two different systems that involve the formation of radical species. On one hand, we can promote enhanced magnetic communication between Ln(III) ions, which is typically quite challenging to achieve given the buried nature of the 4f orbitals, and on the other hand, we rely on a redox-active ligand to design stimuli-responsive metal-organic assemblies. The latter case provides access to “smart” molecular materials that can respond to changes in their environment. Here, a multi-stimuli responsive nanobarrel was studied, which displayed sensitivity to ultraviolet radiation, heat and chemical reduction.
Lastly, Chapter 6 provides a new method for the systematic generation of cationic frameworks, termed Asymmetric Ligand Exchange (ALE). This strategy focuses on the replacement of linear dicarboxylates with asymmetric linkers that features one less negative charge, in order to tune the ionicity of porous frameworks. This allows for the retention of the structural topology and chemical reactivity of the original framework, representing distinct advantages over other similar strategies. Methods to retain permanent porosity in such cationic frameworks are also proposed. Altogether, these studies highlight how the directed assembly of ordered networks can generate varied properties of high scientific interest.
21
Deshmukh, A. A. "Synthesis, characterization and catalytic application of heterogenized transition metal complexes in solid porous materials." Thesis(Ph.D.), CSIR-National Chemical Laboratory, Pune, 2007. http://dspace.ncl.res.in:8080/xmlui/handle/20.500.12252/2560.
Full text
22
Wollmann, Philipp, Matthias Leistner, Ulrich Stoeck, Ronny Grünker, Kristina Gedrich, Nicole Klein, Oliver Throl, et al. "High-throughput screening: speeding up porous materials discovery." Royal Society of Chemistry, 2011. https://tud.qucosa.de/id/qucosa%3A27767.
Full textAbstract:
A new tool (Infrasorb-12) for the screening of porosity is described, identifying high surface area materials in a very short time with high accuracy. Further, an example for the application of the tool in the discovery of new cobalt-based metal–organic frameworks is given.Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.
23
Dickinson, Calum. "Metal oxide porous single crystals and other nanomaterials : an HRTEM study." Thesis, University of St Andrews, 2007. http://hdl.handle.net/10023/217.
Full textAbstract:
Three-dimensional porous single crystals (PSCs) are a recent development in the growing world of mesoporous material. The mesoporosity allows for the material to retain their nanoproperties whilst being bulk in size. The current work concentrates on chromium oxide and cobalt oxide PSCs formed in the templates SBA-15 and KIT-6. HRTEM is the main technique used in this investigation, looking at the morphology and single crystallinity of these materials. A growth mechanism for the PSC material is proposed based on HRTEM observations. XRD studies revealed that the confinement effect, caused by the mesopores, reduces the temperature for both cobalt and chromium oxide crystallisation, as well as a different intermediate route from the metal nitrates. The properties of chromium oxide PSC are also investigated magnetically and catalytically. Some metal oxides in different templates are also presented, despite no PSC forming. HRTEM work on other nanomaterials, based on collaboration, is also presented.
24
Fujiwara, Yu-ichi. "Synthesis and Formation Mechanism of Carbon Materials from Porous Coordination Polymers." Kyoto University, 2018. http://hdl.handle.net/2433/232058.
Full text
25
Lively, Jason M. "In Situ Ion Exchange in a Micro-porous Transition Metal Silicate Framework." TopSCHOLAR®, 2016. http://digitalcommons.wku.edu/theses/1730.
Full textAbstract:
Ion selectivity of minerals has traditionally been utilized in industry as a catalyst, metal separation, and environmental reclamation/sequestration tool. There is an increased interest in understanding ion selectivity mechanisms of micro-porous minerals and mineral-like structures and how they can be applied in various industries: environmental and, potentially, pharmaceutical. This study seeks to understand the ion exchange mechanisms in micro-porous zirconosilicates using time-resolved Raman spectroscopy and X-ray diffraction. The thesis material was exchanged with H+, Na+, K+, and Cs+ in order to better understand structural changes as well as the influence of the H+-bonding during the exchange process. It is hypothesized that the host (H+) ion strongly influences the ion selectivity of the mineral by changing framework polyhedra and ring geometry, and the geometry of the interstitial the OH…H2O bond network to only allow cations of certain sizes through the channels. In addition, the H+ may repel cations with high charge densities from entering the extra-framework sites in the crystal structure by protonating the channel pathways.
26
Karra, Jagadeswarareddy. "Development of porous metal-organic frameworks for gas adsorption applications." Diss., Georgia Institute of Technology, 2011. http://hdl.handle.net/1853/45751.
Full textAbstract:
Metal-organic frameworks are a new class of porous materials that have potential applications in gas storage, separations, catalysis, sensors, non-linear optics, displays and electroluminescent devices. They are synthesized in a "building-block" approach by self-assembly of metal or metal-oxide vertices interconnected by rigid linker molecules. The highly ordered nature of MOF materials and the ability to tailor the framework's chemical functionality by modifying the organic ligands give the materials great potential for high efficiency adsorbents. In particular, MOFs that selectively adsorb CO₂ over N₂, and CH₄ are very important because they have the potential to reduce carbon emissions from coal-fired power plants and substantially diminish the cost of natural gas production. Despite their importance, MOFs that show high selective gas adsorption behavior are not so common.
Development of MOFs for gas adsorption applications has been hindered by the lack of fundamental understanding of the interactions between the host-guest systems. Knowledge of how adsorbates bind to the material, and if so where and through which interaction, as well as how different species in adsorbed mixture compete and interact with the adsorption sites is a prerequisite for considering MOFs for adsorptive gas separation applications. In this work, we seek to understand the role of structural features (such as pore sizes, open metal site, functionalized ligands, pore volume, electrostatics) on the adsorptive separation of CO₂, CO and N₂ in prototype MOFs with the help of molecular modeling studies (GCMC simulations). Our simulation results suggest that the suitable MOFs for CO₂ adsorption and separation should have small size, open metal site, or large pore volume with functionalized groups.
Some of the experimental challenges in the MOF based adsorbents for CO₂ capture include designing MOFs with smaller pores with/without open metal sites. Constructing such type of porous MOFs can lead to greater CO₂ capacities and adsorption selectivities over mixtures of CH₄ or N₂. Therefore, in the second project, we focused on design and development of small pore MOFs with/without open metal sites for adsorptive separation of carbon dioxide from binary mixtures of methane and nitrogen. We have synthesized and characterized several new MOFs (single ligand and mixed ligand MOFs) using different characterization techniques like single-crystal X-ray diffraction, powder X-ray diffraction, TGA, BET, gravimetric adsorption and examined their applicability in CO₂/N₂ and CO₂/CH₄ mixture separations. Our findings from this study suggest that further, rational development of new MOF compounds for CO₂ capture applications should focus on enriching open metal sites, increasing the pore volume, and minimizing the size of large pores.
Flue gas streams and natural gas streams containing CO₂ are often saturated by water and its presence greatly reduces the CO₂ adsorption capacities and selectivities. So, in the third project, we investigated the structural stability of the developed MOFs by measuring water vapor adsorption isotherms on them at different humid conditions to understand which type of coordination environment in MOFs can resist humid environments. The results of this study suggest that MOFs connected through nitrogen-bearing ligands show greater water stability than materials constructed solely through carboxylic acid groups.
27
Sun, Xin. "Organofunctional silica mesostructures with improved accessibility and applications as heavy metal ion adsorbents." Diss., Connect to online resource - MSU authorized users, 2008.
Find full text
28
Ohira, Koji. "Systematic survey of phosphate materials for lithium-ion batteries by first principle calculations." Master's thesis, 京都大学 (Kyoto University), 2013. http://hdl.handle.net/2433/180500.
Full text
29
Li, Yuan. "Synthesis and mechanical characterization of transversely isotropic nanoporous platinum." Thesis, Georgia Institute of Technology, 2011. http://hdl.handle.net/1853/42927.
Full textAbstract:
Nanoporous (NP) metal foams combine desirable characteristics of metals with unique nanoarchitectural features to yield weight normalized properties far superior than either dense metals or bulk metal foams. Due to their high surface to volume ratios these structures show great promise as components of fuel cells, as sensors and have been suggested for use in biological applications, for example as antimicrobial scaffolds or as platforms on which to explore biological material behavior. While most NP metal foams are isotropic, structures with anisotropic features spanning different length scales can further extend applications. This work examines the parameters controlling the synthesis of transversely isotropic NP Platinum foam by dealloying an amorphous Pt-Si alloy. The structure that is examined in this work is hierarchical with Voronoi polyhedra that form on the free surface and under each polyhedral hyper-structure, nanocrystalline NP Pt foam forms with radial struts of length ~60 nm and grain size of 5 nm. The size of the polyhedra can be tailored by changing the dealloying potential. In turn, the mechanical properties of these structures as assessed by nanoindentation can range from 1 to 3GPa depending on the geometric arrangement of the struts. Finally, the initiation location of these structures and the relationship between electrochemical parameters and dealloying front evolution is examined.
30
Hellman, Oskar. "Synthesis of framework porous sorbents using sustainable precursors." Thesis, Uppsala universitet, Nanoteknologi och funktionella material, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-445896.
Full textAbstract:
Metal organic frameworks (MOFs) is a quite recently discovered porous material group which shows potential in many different areas. One of these areas is carbon capture; the framework structure of the porous materials allows gas molecules to adsorb to the surface of the pores. MOFs are conventionally synthesised at high temperatures and with hazardous solvents. The goal of this projectwas to synthesise highly porous MOFs at room temperature with water as the main solvent, using environmentally friendly and non-hazardous precursors. As well as the room temperature synthesis, conventional synthesis methods were used with the same precursors as comparison. The materials were characterised with X-ray diffraction, thermogravimetrical methods and IR-spectroscopy. To assess the porosity of the materials, gas adsorption evaluation was performed with CO2, N2, SF6, and CH4 at 20⁰C. In the end, three novel porous magnesium-based materials and one zirconium-based material were successfully synthesised. One of the magnesium-based materials showed a moderately high CO2 adsorption (2.38mmol/g), and could be synthesised at room temperature. The zirconium-based material showed a remarkably high selectivity (17.7) for SF6 over N2 and a high surface area (550m2/g)
31
Klingstedt, Miia. "Characterizing cavity containing materials using electron microscopy : A study of metal oxides, mesoporous crystals and porous material containing nanosized metal-particles." Doctoral thesis, Stockholms universitet, Institutionen för material- och miljökemi (MMK), 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:su:diva-64164.
Full textAbstract:
This thesis concerns the characterization of novel materials by utilizing electron microscopy techniques. The examined materials contain cavities with certain attributes that enables desired properties for applications such as gas separation, catalysis and fuel cells. The specimens concerned herein belong to the following groups of materials: Metal oxides in the Sb-W-Mo-O system; ordered mesoporous silicas and carbons; hollow spheres containing Au-nanoparticles; zeolite LTA incorporated with mesopores; metal organic frameworks doped with nickel. With scanning electron microscopy (SEM) and transmission electron microscopy (TEM) you get vast possibilities within the field of characterization. This thesis utilizes conventional electron microscopy techniques such as imaging, energy-dispersive spectroscopy and electron diffraction as well as reconstruction techniques, such as exit-wave reconstruction, electron tomography and electron crystallography. Furthermore, the sample preparation technique cross-section polishing has been used in conjunction with low voltage SEM studies. The scientific approach is to gain knowledge of nano-sized cavities in materials, in particular their shape, size and content. The cavities often have irregularities that originates from the synthesis procedure. In order to refine the synthesis and to understand the properties of the material it is required to carefully examine the local variations. Therefore average characterization techniques such as crystallography needs to be combined with local examination techniques such as tomography. However, some of the materials are troublesome to investigate since they to some extent bring limitations to or gets easily damaged by the applied characterization technique. For the development of novel materials it is essential to find means of overcoming also these obstacles.At the time of the doctoral defense, the following paper was unpublished and had a status as follows: Paper 6: Submitted.
32
Williams, Christopher Bryant. "Design and development of a layer-based additive manufacturing process for the realization of metal parts of designed mesostructure." Diss., Atlanta, Ga. : Georgia Institute of Technology, 2008. http://hdl.handle.net/1853/22687.
Full textAbstract:
Thesis (Ph. D.)--Mechanical Engineering, Georgia Institute of Technology, 2008.Committee Co-Chair: David Rosen; Committee Co-Chair: Farrokh Mistree; Committee Member: David McDowell; Committee Member: Hamid Garmestani; Committee Member: Joe Cochran; Committee Member: Shreyes Melkote.
33
Young, Allison Patricia. "Using Lattice Engineering and Porous Materials Gating to Control Activity and Stability in Heterogeneous Catalysis." Thesis, Boston College, 2018. http://hdl.handle.net/2345/bc-ir:108207.
Full textAbstract:
Thesis advisor: Chia-Kuang TsungHeterogeneous catalysis is a critical field for chemical industry processes, energy applications, and transportation, to name a few. In all avenues, control over the activity and selectivity towards specific products are of extreme importance. Generally, two separate methods can be utilized for controlling the active surface areas; a below and above the surface approach. In this dissertation, both approaches will be addressed, first starting with controlling the active sites from a below approach and moving towards control through sieving and gating effects above the surface. For the first part half, the control of the product selectivity is controlled by finely tuning the atomic structures of nanoparticle catalysts, mainly Au-Pd, Pd-Ni-Pt, and Pd Ni3Pt octahedral and cubic nanoparticle catalysts. Through these shaped core-shell, occasionally referred to as core@shell, particles the shape is maintained in order to expose and study certain crystal facets in order to obtain a more open or closed series of active sites. With the core shell particles, the interior core particle (Au and Pd) is used for the overall shape but also to expansively/compressively strain the outer shell layer. By straining the surface, the surface electronic structure is altered, by raising or lowering the d-band structure, allowing for reactants to adsorb more or less strongly as well as adsorb on different surface sites. For the below the surface projects, the synthesized nanoparticle catalyst are used for electrochemical oxidation reactions, such as ethanol and methanol oxidation, in order to study the effect of the core and shell layers on initial activity, metal migration during cycling, as well as particle stability and activity using different crystal structures. In particular, the use of core shell, alloyed, and intermetallic (ordered alloys) particles are studied in more detail. In the second half of this dissertation, control of the selectivity will be explored from the top down approach; in particular the use of metal organic framework (MOF) will be utilized. MOF, with its inherent size selective properties due to caging effects from the chosen linkers and nodes, is used to coat the surface of catalysts for gas, liquid, and electrochemical catalysis. By using nanoparticle catalyst, the use of MOF, more explicitly the robust zirconium based UiO-66, as a crystalline capping agent is first explored. By incorporating both the nanoparticle and UiO-66 amino functionalized precursors in the synthesis, the nanoparticles are formed first and followed by coating in UiO-66-NH2, where the amino group acts as an anchor, completely coating the particles. The full coating is tested through size selective alkene hydrogenations with the NP surface further tested by liquid phase selective aldehyde hydrogenations; the UiO-66-NH2 pores help to guide the reactant molecule in a particular orientation for the carbonyl to interact rather than the unsaturated C=C bond. This approach is taken for more complex hybrid structures for electrochemical proton exchange membrane fuel cell (PEMFC) conditions. Through the gating effects, the UiO-66 blocks the Pt surface active sites from poisonous sulfonate groups off of the ionomer membrane while simultaneously preventing aggregation and leaching of Pt atoms during electrochemical working conditions
Thesis (PhD) — Boston College, 2018
Submitted to: Boston College. Graduate School of Arts and Sciences
Discipline: Chemistry
34
Morabito, Joseph. "Kinetic Methods for Understanding Linker Exchange in Metal-Organic Frameworks." Thesis, Boston College, 2017. http://hdl.handle.net/2345/bc-ir:107593.
Full textAbstract:
Thesis advisor: Chia-Kuang (Frank) TsungExchange reactions have enabled a new level of control in the rational, stepwise preparation of metal-organic framework (MOF) materials. However, their full potential is limited by a lack of understanding of the molecular mechanisms by which they occur. This dissertation describes our efforts to understand this important class of reactions in two parts. The first reports our use of a linker exchange process to encapsulate guest molecules larger than the limiting pore aperture of the MOF. The concept is demonstrated, along with evidence for guest encapsulation and its relation to a dissociative linker exchange process. The second part describes our development of the first quantitative kinetic method for studying MOF linker exchange reactions and our application of this method to understand the solvent dependence of the reaction of ZIF-8 with imidazole. This project involved the collection of the largest set of rate data available on any MOF linker exchange reaction. The combination of this dataset with small molecule encapsulation experiments allowed us to formulate a mechanistic model that could account for all the observed kinetic and structural data. By comparison with the kinetic behavior of complexes in solution, we were able to fit the kinetic behavior of ZIF-8 into the broader family of coordination compounds. Aside from the specific use that our kinetic data may have in predicting the reactivity of ZIF linker exchange, we hope that the conceptual bridges made between MOFs and related metal−organic compounds can help reveal underlying patterns in behavior and advance the field
Thesis (PhD) — Boston College, 2017
Submitted to: Boston College. Graduate School of Arts and Sciences
Discipline: Chemistry
35
Vijwani, Hema. "Hierarchical Porous Structures with Aligned Carbon Nanotubes as Efficient Adsorbents and Metal-Catalyst Supports." Wright State University / OhioLINK, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=wright1433350549.
Full text
36
Kothalawala, Kothalawalage Nuwan. "Nanoporous high surface area silicas with chelating groups for heavy metal ion adsorption from aqueous solution /." View online, 2010. http://repository.eiu.edu/theses/docs/32211131524422.pdf.
Full text
37
Hondow, Nicole S. "The synthesis of new heterogeneous Fischer-Tropsch catalysts : the incorporation of metal aggregates in mesoporous silicas." University of Western Australia. School of Biomedical, Biomolecular and Chemical Sciences, 2008. http://theses.library.uwa.edu.au/adt-WU2008.0083.
Full textAbstract:
Transition metals have been extensively studied as catalysts, and certain metals are known to be highly selective and active for certain processes. It is possible to use metal clusters as models for reactions occurring at metal surfaces, but it is often found that in practical applications these complexes are unstable and break down. It is possible to support or stabilise a metal species on, or in, an inorganic framework, making heterogeneous catalysts. A study of metal cluster chemistry with mixed-donor phosphine ligands was conducted, with several new ruthenium complexes synthesised. The chemistry of metal-sulfur interactions is applicable to the removal of sulfur from crude oil, and in an investigation to this chemistry, the bifunctional ligand HSCH2CH2PPhH was added to ruthenium clusters (Chapter 2). The addition of this sulfur-phosphine ligand to the cluster [Ru3([mu]-dppm)(CO)10] produced the carbonyl substituted cluster [Ru3([mu]-dppm)(H)(CO)7(SCH2CH2PPhH)] and the bridged complex [Ru3([mu]-dppm)(H)(CO)8(SCH2CH2PPhH)Ru3([mu]-dppm)(CO)9], as well as recovery of the starting material. Further reactions with this ligand were examined with [Ru3(CO)12] and other complexes were synthesised with different clusters and ligands (Chapter 2). The M41S materials, MCM-41 and MCM-48, are well ordered porous materials with high surface areas (Chapter 3). The incorporation of three different types of metal species, metallosurfactants, metal clusters and nanoparticles, into these materials was examined in an attempt to make heterogeneous catalysts for the Fischer-Tropsch process. The success of this was studied using characterisation techniques such as powder X-ray diffraction, transmission electron microscopy and BET surface area measurements. Metallosurfactants containing either copper or cobalt were added directly to the synthesis of the porous materials in an attempt to incorporate the metals into the framework structure of the porous silica (Chapter 3). This resulted in well ordered iv porous materials, but the successful incorporation of the metal species was found to be dependent on several factors. Organometallic clusters containing metals such as copper, iron and ruthenium, with supporting carbonyl ligands, were added post-synthesis to MCM-41 and MCM-48 (Chapter 4). Various reaction conditions were examined in attempts to ensure small particle formation. The optimum incorporation of nanoparticles containing iron and platinum was found to occur when a suspension of pre-made and purified nanoparticles was added post-synthesis to the M41S materials (Chapter 4). These materials resulted in porous silicas with well dispersed, small metal particles. The optimum conditions for the calcination of these new materials were determined, in an attempt to remove the ligands and stabilisers and retain the small metal particle size (Chapter 5). Testing for the Fischer-Tropsch process was conducted in a fixed bed reactor through which a flow of synthesis gas containing carbon monoxide and hydrogen could pass over the material (Chapter 5). Analysis by gas chromatography showed that the major product produced by all materials tested was methane, but other hydrocarbons were produced in small amounts, including hexane.
38
Wiersum, Andrew. "Developing a strategy to evaluate the potential of new porous materials for the separation of gases by adsorption." Thesis, Aix-Marseille, 2012. http://www.theses.fr/2012AIXM4817/document.
Full textAbstract:
Les Metal-Organic Framework (MOF) sont des adsorbants très prometteurs pour la séparation des gaz. Formés de centres métalliques reliés par des ligands organiques, ces matériaux présentent une structure organisée avec des pores de taille contrôlée ainsi que des surfaces et des volumes poreux très élevées. La possibilité de faire varier à la fois le centre métallique et le ligand organique donne aux MOFs une très grande diversité qu'on ne retrouve pas chez les zéolithes et les charbons actifs.L'objectif de cette étude a été d'évaluer le potentiel des MOFs en tant qu'adsorbants pour quatre procédés de séparation de gaz. En raison du grand nombre de MOFs disponibles, il a été nécessaire d'élaborer une stratégie pour identifier les matériaux les plus prometteurs dans chaque cas. Cette méthodologie comprend quatre étapes : une étape de criblage, une étape expérimentale, une étape de calcul et une étape d'évaluation.Pour l'étape de criblage, un nouvel appareil dit « à haut débit » a été développé pour mesurer des isothermes approximatives. Ensuite, un certain nombre de matériaux ont été retenus pour faire une étude plus approfondie de leurs propriétés d'adsorption. Des isothermes très précises ont été mesurées par gravimétrie tandis que les enthalpies d'adsorption ont été obtenues par microcalorimétrie. Dans l'étape de calcul, le modèle IAST a été utilisée pour prédire les sélectivités à partir des données en gaz pur. Enfin, les adsorbants ont été classés à l'aide d'un nouveau paramètre de sélection qui regroupe la sélectivité, la capacité efficace et l'enthalpie d'adsorption, où l'importance de chacun des paramètres peut être ajustée en fonction des besoins du procédéMetal-Organic Frameworks (MOFs) are seen to be one of the most promising classes of adsorbents for gas separations. Consisting of metal clusters connected by organic linkers to form a fully crystalline network, these materials have record breaking surface areas and pore volumes as well as a wide variety of pore structures and sizes. This, coupled with the possibility to use virtually any transition metal as well as functionalized linkers, gives MOFs the chemical and physical versatility often lacking in traditional adsorbents such as zeolites and activated carbons.The purpose of this study was to evaluate the potential of MOFs as adsorbents for four gas separations of interest to the petrochemical industry. Because of the diversity and number of MOFs available, a methodology was needed to help identify the most promising materials in each case. The proposed methodology comprises four stages: a screening step, an experimental step, a computational step and finally an evaluation step. For the first stage, a high-throughput setup was developed to measure rough adsorption isotherms. A number of materials were then selected for a more thorough investigation of their adsorption properties. Highly accurate isotherms were measured gravimetrically while precise adsorption enthalpies were obtained by microcalorimetry. Step three involved predicting the co-adsorption behaviour from the pure gas isotherms using the Ideal Adsorbed Solution Theory. Finally, the adsorbents were ranked based on a new selection parameter regrouping selectivity, working capacity and adsorption enthalpy where the importance of each term can be adjusted depending on the requirements of the process
39
Sanderyd, Viktor. "Novel Hybrid Nanomaterials : Combining Mesoporous Magnesium Carbonate with Metal-Organic Frameworks." Thesis, Uppsala universitet, Nanoteknologi och funktionella material, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-355366.
Full textAbstract:
Nanotechnology as a field has the potential to answer some of the major challenges that mankind faces in regards to environmental sustainability, energy generation and health care. Though, solutions to these concerns can not necessarily rely on our current knowhow. Instead, it is reasonable to expect that humanity must adapt and learn to develop new materials and methods to overcome the adversities that we are facing. This master thesis has involved developing novel materials, serving as a small step in the continuous march towards a bright future where this is possible. More specifically, this work sought to combine mesoporous magnesium carbonate with various metal-organic frameworks to utilize the beneficial aspects from each of these constituents. The ambition was that these could be joined to render combined micro-/mesoporous core-shell structures, with high surface areas and many active sites whilst maintaining a good permeability. Numerous different synthesis routes were developed and explored in the pursuit of viable routes to design novel materials with potential future applications within for instance drug delivery, water harvesting from air and gas adsorption. Coreshell structures of the hydrophilic mesoporous magnesium carbonate covered with the hydrophobic zeolitic imidazole framework ZIF-8 was successfully synthesized for the first time, and practical studies demonstrated a dramatically enhanced water stability, which is perceived to have an impact on further research on these materials. ZIF-67 was also combined with mesoporous magnesium carbonate in a similar manner. Further, Mg-MOF-74 was grown directly from mesoporous magnesium carbonate, where the latter acted as a partially self-sacrificing template, with the aim of rendering a porous hierarchical structure with contributions from the micro- and mesoporous ranges. The outcomes of all these syntheses were characterized using several analyzing methods such as scanning electron microscopy, X-ray diffraction, energy dispersive spectroscopy and nitrogen sorption analysis.
40
Wu, Qingliu. "SYNTHESIS AND ENERGY APPLICATIONS OF ORIENTED METAL OXIDE NANOPOROUS FILMS." UKnowledge, 2011. http://uknowledge.uky.edu/gradschool_diss/206.
Full textAbstract:
This dissertation mainly addresses the synthesis of well-ordered mesoporous titania thin films by dip coating with PEO-PPO-PEO triblock copolymer surfactant template P123. Because P123 is composed of poly(ethylene oxide) [PEO] and poly(propylene oxide) [PPO] blocks, concentrations of ingredients are adjusted to tune the films’ wall thickness, pore size and mesophase. Structural changes are consistent with partitioning of species among PEO blocks, PPO blocks, and the PEO/PPO interface. Titanates localize near PEO and increase wall thickness (by 5 nm to 7 nm). Depending on aging temperature, PPG either swells the PPO cores (when it is hydrophobic) or introduces large (>200 nm) voids (when it is hydrophilic but phase separates during heating). 1-butanol localizes at the PEO/PPO interface to favor a 3D hexagonal mesostructure.
In another approach, anodizing Ti foils yields vertically aligned titania nanotubes arrays with exceptional stabilities as anodes in lithium ion batteries; they maintain capacities of 130-230 mAhg-1 over 200 cycles. No microstructural changes are induced by battery cycling and good electrical contact is maintained. A diffusion induced stress model suggests that thin-walled nanotubes arrays should be stable under testing conditions, and that ordered hexagonal columnar pore arrays should have both high charge/discharge rates and low stress development.
41
Haja, Mohideen Mohamed Infas. "Novel metal organic frameworks : synthesis, characterisation and functions." Thesis, University of St Andrews, 2011. http://hdl.handle.net/10023/1892.
Full textAbstract:
The synthesis and properties of novel Metal Organic Frameworks were investigated and reported in this thesis. Thirteen new materials have been synthesized and their properties have been discussed with nine of the structures being solved. The most interesting and useful MOF among the thirteen materials is STAM-1, a copper-based Metal Organic Framework in which the starting linker (Benzene-1,3,5-tricarboxylic acid) undergoes selective in situ monoesterification during the synthesis. The monoesterified BTC can be recovered easily from the MOF, opening up MOF synthesis as a “protection” tool for unexpected selectivity in preparative chemistry that is difficult to accomplish using standard organic chemistry approaches. The selective linker derivatisation leads to the formation of a porous MOF with two types of accessible channel; one hydrophilic lined by copper and the other hydrophobic, lined by the ester groups. The unique structure of the pores leads to unprecedented adsorption behaviour, which reacts differently to gases or vapours of dissimilar chemistry and allows them to access different parts of the structure. The structural flexibility of STAM-1 shows significant differences in the kinetics of O₂ and N₂ adsorption, showing potential for new materials to be developed for air separation. Having two types of channel systems, adsorption can be switched between the two channels by judicious choice of the conditions; a thermal trigger to open the hydrophilic channel and a chemical trigger to open the hydrophobic channel. The storage and release capability of NO in STAM-1 was investigated for use in biomedical applications. Successful studies showed the strength of the antibacterial effects of NO loaded STAM-1, by using three different bacterial strains as a test of performance and were found to be bactericidal. Furthermore the antibacterial effects of NO free STAM-1 were also probed and found to be bactericidal even with low concentrations of the material such as 5 wt%. STAM-1 showed some complex magnetic behaviour by displaying strong antiferromagnetic properties at room temperature and ferromagnetic properties at lower temperatures. The antiferromagnetic coupling was observed within the dimer and ferromagnetic coupling between the dimers. This property of ferromagnetism can only be attributed to the corporation of magnetic dimers in the framework. STAM-2 displays a different magnetic behaviour than STAM-1 which shows paramagnetic properties at room temperature and antiferromagnetic properties at lower temperatures. Other novel MOFs were also successfully characterised and their properties were investigated for potential applications.
42
Pally, Nitin Kumar. "Synthesis and Structures of New Three-Dimensional Copper Metal-Organic Frameworks." TopSCHOLAR®, 2013. http://digitalcommons.wku.edu/theses/1295.
Full textAbstract:
Metal-organic frameworks (MOFs) are crystalline materials with metal ions covalently bonded to organic ligands. The ligands act as spacers often creating a porous structure with very high pore volume and surface area. MOFs are known for their robust structures, high porosity, and different chemical functionalities and are considered for applications in adsorptions, separations, catalysis and gas storage. This work focuses on the synthesis of new MOFs using copper compounds. Different types of carboxylate ligands were used for the synthesis. Two new copper-organic frameworks, [Cu3(pyz)(btc)] (1), and [(Cu3(btc))•xH2O] (2) (btc= benzene-1,3,5-tricarboxylate, pyz= pyrazine) have been synthesized using hydro/solvothermal methods and have been characterized using X-ray diffraction, IR, TGA, fluorescence and CHN analysis.
43
McPherson, Matthew Joseph. "Control of water and toxic gas adsorption in metal-organic frameworks." Thesis, University of St Andrews, 2016. http://hdl.handle.net/10023/16489.
Full textAbstract:
The research presented in this thesis aims to determine the effectiveness of the uptake of toxic gases by several MOFs for future use in gas-mask cartridges, and to attempt to compensate for any deficiencies they show in “real-world” conditions. The main findings of this thesis confirm that MOFs are suitable candidates for the use in respirator cartridge materials and provide high capacity for adsorption of toxic gases like ammonia and STAM-1 in particular showed an impressive improvement in humid conditions, which normally decrease the performance of MOFs made from the same materials, such as HKUST-1. STAM-1's improved performance in humid conditions is attributed to the structural shift it displays upon dehydration and rehydration and this was shown to be the case in a structural analogue, CuEtOip, which was synthesised in the author's research group. This analogue was analysed using a combination of single crystal XRD and solid state MAS-NMR, both of which showed the structural change occurring and displays similar gas sorption behaviours, suggesting that this mechanism is the source of STAM-1's improved performance in humid conditions. This thesis also examines the “Armoured MOF” process and investigates the transferability of the process of deposition of mesoporous silica onto MOFs with vastly different properties and synthetic methods compared to those published in the original publication. Alongside this, attempts to protect MOFs using mesoporous silicates were investigated for their viability.
44
Löfgren, Rebecka. "Metal ion adsorption of highly mesoporous magnesium carbonate." Thesis, Uppsala universitet, Nanoteknologi och funktionella material, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-388827.
Full textAbstract:
In this project the adsorption ability of mesoporous magnesium carbonate (MMC) for copper (Cu), cobalt (Co), chromium (Cr) and arsenic (As) was evaluated. This was done by mixing MMC and dissolved metal (of different concentrations) and measuring the concentration of the solution before and after addition of MMC with Inductively coupled plasma optical emission spectroscopy. Besides MMC, “ordinary” magnesium carbonate (MgCO_3) was evaluated for comparison. Furthermore, the MMC was characterised with various instruments before and after adsorption of the metals. The adsorption experiments established that MMC was able to adsorb large amounts of Cu, Co and As while MgCO_3 was not. Moreover, it was discovered that both materials adsorbed equally large amounts of Cr. At higher concentrations of Cu and Co the uptake capacity of MMC suddenly dropped. However, for As, it was determined that MMC reached saturation at a concentration of ~22 mg/L. An adsorption experiment of a mixture of metals of 20 mg/L of each metal could not conclude anything about the selectivity of MMC, but the experiment revealed that MMC was able to adsorb all of Cu, Co and As rapidly at this concentration. The characterisation of MMC before adsorption revealed an amorphous structure and a high porosity. The structure of MMC after adsorption of Cu went from amorphous to crystalline and after adsorption of Co and As the structure also became crystalline, but of a lower degree than after adsorption of Cu. Furthermore, it was discovered that ion exchange also occurred along with adsorption.
45
Gonzalez-Santiago, Berenice. "Synthesis and properties of scandium carboxylate metal-organic frameworks." Thesis, University of St Andrews, 2015. http://hdl.handle.net/10023/6904.
Full textAbstract:
This work investigated the synthesis, characterisation and properties of known and novel scandium carboxylate Metal-organic Frameworks (MOFs). The first part reports the performance of these Sc-MOFs as Lewis acid catalysts. The porous MOF scandium trimesate MIL-100(Sc) and the scandium terephthalates such as MIL-101(Sc), MIL-88B(Sc) and MIL-68(Sc) (prepared as the Sc-analogue for the first time), and scandium biphenyldicarboxylate MIL-88D(Sc) were prepared and tested as Lewis acid catalysts. Chromium MIL-101 and MIL-100 and scandium-exchanged zeolites were prepared for comparison. Moreover, successful encapsulation of the phosphotungstate polyoxometalates (POMs) in the cavities of MIL-101(Sc) enhanced the stability of this material. These scandium and chromium MOFs, POM-MOF composites and scandium-exchanged zeolite were tested as heterogeneous catalysts in the carbonyl ene reaction between α-methyl styrene and ethyl trifluoropyruvate. This showed that MIL-100(Sc) was the best catalyst for this reaction, achieving a conversion of 99% to the desired product. The stabilized MIL-101(Sc) was also very active, but less selective for this reaction. Acetalisation of acetaldehyde was also studied, and in this reaction the isoreticular MOFs MIL-88(B) and MIL-88D(Sc) were the most active and selective catalysts. For this reaction, the activity of MIL-100(Sc) was low, which was attributed to reduce pore size and blockage. Functionalisation of the range of scandium terephthalates such as MIL-101(Sc), MIL-88B(Sc), MIL-68(Sc), Sc₂BDC₃,and MIL-53(Sc) particularly with –NH₂ groups, made up the second main part of this research. Solvothermal synthesis were performed at lower temperatures and using mixed solvents to synthesize these amino-terephthalate MOFs, often for the first time, and their adsorption properties were studied, particularly for the adsorption of CO₂. The synthesis of pure Sc₂(NH₂-BDC)₃ and Sc₂(Br-BDC)₃ was achieved for first time by a solvothermal route, lower temperatures, and mixed solvents. This approach yielded large crystals suitable for single crystal diffraction and microcrystal IR spectroscopy. Post-synthetic modification (PSM) of Sc₂(NH₂-BDC)₃ was explored by incorporation of NO₂-groups into the framework by solvent-assisted ligand exchange. The adsorption properties of functionalised and post-modified materials were compared with those of Sc₂BDC₃ and Sc₂(NO₂-BDC)₃ for methanol and hydrocarbons This study demonstrated that Sc₂BDC₃ and Sc₂(NH₂-BDC)₃ give the higher uptakes while the –Br and –NO₂ forms display shape selectivity for n-alkanes over iso-alkanes. Amino-functionalised MIL-53(Sc) was prepared for the first time using a mixed ligand approach, so that 10-20% of a second functionalised terephthalate ligand (NO₂, Br, -(OH)₂) was required for successful single phase synthesis in addition to amino-terephthalic acid. The materials were characterised using PXRD, TGA and gas adsorption, which confirms the samples show a range of behaviour for CO₂ adsorption. Notably, the `breathing´ behaviour is strongly dependent on the type of functionalisation. Finally, the exploratory synthesis of novel scandium MOFs, using isophthalic acid (IA) and its amino and nitro- derivatives, 2,5-furandicarboxylate (FDA) and the porphyrin tetra(carboxyphenyl)porphyrin (TCPP) as linkers was carried out and six novel materials were synthesized, three of which gave crystals large enough for their structure to be determined by single crystal diffraction. Further characterisation was carried out by PXRD, TGA and solid-state NMR. Some of these materials have been shown to be porous to CO₂ and N₂.
46
Mohamed, Mona Hanafy. "Organic-Inorganic Hybrid Materials Based on Oxyanion Linkers for Selective Adsorption of Polarizable Gases." Scholar Commons, 2015. http://scholarcommons.usf.edu/etd/5811.
Full textAbstract:
The separation of industrially important gases into pure supplies that can be used for many practical applications is based mainly on energy intensive methods such as the cryogenic distillation which is costly and energy intensive. Therefore other routes have been introduced to industrial separation of gases such as the selective adsorption using porous solid materials. Zeolites and activated carbon are the most widely used recyclable energy-efficient porous solid materials for industrial gas separations, however the low uptake and selectivity hurdles their commercialization in some separation applications. Metal organic frameworks (MOFs) have been extensively studied as solid porous materials in term of gas separations nevertheless the future of MOFs for practical gas separations is considered to be vague and stringent due to their low stability, low capacity and selectivity especially at low partial pressures of the adsorbed gas, the competitive adsorption of the contaminants such as H2O, NOX and SOX, high cost of the organic ligands, besides the challenges of the formulation of MOFs which is very important in the MOFs marketing. In this context we present new porous materials based on inorganic linkers as well as the organic molecules, Organic-Inorganic Hybrid Materials, which were found to conquer the current challenges for the exploitation of MOFs in practical gas separation such as separation of trace and low CO2 concentrations and Xe separation from Xe/Kr mixtures.
The work presented herein encompasses the development of novel 48.67 topology metal organic material (MOM) platform of formula [M(bp)2(M'O4)] (M= Co or Ni; bpe= bipyridine-type linkers; M'= W, Mo or Cr) that have been assigned RCSR code mmo based upon pillaring of [M(bp)2] square grids by angular WO42-, MoO42- or CrO42- pillars. Such pillars are unexplored in MOMs. They represent ideal platforms to test the effect of pore size and chemistry upon gas sorption behavior since they are readily fine-tuned and can be varied at their 3-positions (metal, organic linker and the inorganic pillar) without changing the overall structure. Such an approach allows for systematic control of pore size to optimize interactions between the framework and the adsorbent in order to enhance selectivity and/or gas uptake. Interestingly, these nets showed a high chemical stability in air, water, boiling water and in a wide range of pH which is certainly a desirable property in industry and commercialization of MOMs.
[Ni(bpe)2(MoO4)] (bpe= 1,2-bis(4-pyridyl) ethane), MOOFOUR-1-Ni, and its chromate analog, CROFOUR-1-Ni, exhibit remarkable CO2 affinity and selectivity, especially at low loading. This behavior can be attributed to exceptionally high isosteric heats of adsorption (Qst) of CO2 in MOOFOUR-1-Ni and CROFOUR-1-Ni of ~56 and ~50 kJ/mol, respectively, at zero loading. These results were validated by modeling which indicate that the electrostatics of such inorganic anions towards CO2 affords favourable attractions to CO2 that are comparable to the effect of unsaturated metal centres.
The use of WO42- instead of CrO42- or MoO42- as an angular pillar in mmo topology nets has afforded two isostructural porous nets of formula [M(bpe)2WO4] (M = Co or Ni, bpe=1,2-(4-pyridyl)ethene). The Ni variant, WOFOUR-1-Ni, is highly selective towards CO2 thanks to its exceptionally high isosteric heat of adsorption (Qst) of -65.5 kJ/mol at zero loading.
The fine-tunability and the inherent modularity of this platform allow us exquisite design and control over the pore chemistry through the incorporation of different functionalities inside the channels of the networks which was then demonstrated as valuable strategy in terms of carbon dioxide capture at condition relevant to the direct CO2 capture from air. The exploitation of 4,4'-azopyridine in the design and synthesis of CROFOUR-2-Ni, an isostructure of CROFOUR-1-Ni, affords a paradigm shift in the CO2 adsorption properties as exemplified by the enhanced CO2 isosteric heat of adsorption at moderate and high loading in CROFOUR-2-Ni and the superior CO2 selectivity even for trace and low CO2 concentration.
The two isostructures, CROFOUR-1-Ni and CROFOUR-2-Ni have been also investigated in term of Xe adsorption and separation from Xe/Kr mixtures. The two structures were found to exhibit the remarkable Xe affinity and selectivity which, together with high stability, good recyclability, low regeneration energy and low cost of the two materials could not only diminish the cost of the Xe and Kr production but also can potentially afford a high purity of the separated gases.
47
Johnson, Janine. "Thermomechanical modeling of porous ceramic-metal composites accounting for the stochastic nature of their microstructure." Diss., Georgia Institute of Technology, 2009. http://hdl.handle.net/1853/33857.
Full textAbstract:
Porous ceramic-metal composites, or cermets, such as nickel zirconia (Ni-YSZ), are widely used as the anode material in solid oxide fuel cells (SOFC). These materials need to enable electrochemical reactions and provide the mechanical support for the layered cell structure. Thus, for the anode supported planar cells, the thermomechanical behavior of the porous cermet directly affects the reliability of the cell. Porous cermets can be viewed as three-phase composites with a random heterogeneous microstructure. While random in nature, the effective properties and overall behavior of such composites can still be linked to specific stochastic functions that describe the microstructure. The main objective of this research was to develop the relationship between the thermomechanical behavior of porous cermets and their random microstructure. The research consists of three components. First, a stochastic reconstruction scheme was developed for the three-phase composite. From this multiple realizations with identical statistical descriptors were constructed for analysis. Secondly, a finite element model was implemented to obtain the effective properties of interest including thermal expansion coefficient, thermal conductivity, and elastic modulus. Lastly, nonlinear material behaviors were investigated, such as damage, plasticity, and creep behavior. It was shown that the computational model linked the statistical features of the microstructure to its overall properties and behavior. Such a predictive computational tool will enable the design of SOFCs with higher reliability and lower costs.
48
Glass, Joseph. "Modelling and optimisation of metal foam integrated heat exchangers for power electronics cooling." Thesis, Université Grenoble Alpes, 2021. http://www.theses.fr/2021GRALI007.
Full textAbstract:
Il y a plusieurs décennies, l'électronique de puissance (PE) est devenue une discipline importante dans le monde de l'électrotechnique.Grâce aux progrès technologiques réguliers, à savoir l'utilisation de matériaux à "wide band gap" pour les semi-conducteurs, les dispositifs PE sont devenus plus compacts et efficaces, mais cela a malheureusement entraîné une gestion thermique réduite. Ainsi, dans le cadre d'un effort collaboratif entre G2Elab, LEGI et SIMAP, ce travail a étudié l'utilisation de la mousse métallique comme nouvel échangeur de chaleur utilisé dans un système de refroidissement à convection forcée qui peut être intégré dans des modules PE pour un refroidissement supérieur. Les mousses métalliques sont légères, ont de faibles densités, des surfaces spécifiques élevées, une structure à cellules ouvertes et de bonnes propriétés thermiques. Ils sont typiquement classés par leur porosité (ε), leur densité de pores (PPI, pores par pouce) et par le diamètre des fibres solides (df). Les avantages du transfert de chaleur proviennent de la possibilité d'une surface spécifique accrue par rapport à d'autres échangeurs de chaleur, tels que des microcanaux, et de la microstructure tortueuse qui génère des turbulences d'écoulement et améliore les transferts de convection dans le fluide de refroidissement. Les performances thermiques ont été modélisées en développant un modèle analytique qui considérait les échangeurs de chaleur comme un réseau de résistances en série. Ceci a été réalisé en simplifiant les équations LTNE qui régissent le transfert d'énergie à travers les phases solide et fluide. Le modèle a été initialement comparé aux simulations numériques et aux résultats expérimentaux de la littérature scientifique, où il a bien fonctionné. Comme niveau supplémentaire de validation, un banc d'essai expérimental a été conçu et assemblé in-house. Les performances thermiques ont été vérifiées en utilisant des thermocouples pour mesurer le profil de température des phases solide et fluide, et les propriétés hydrauliques ont été trouvées en mesurant la chute de pression à travers les échangeurs de chaleur. Les résultats analytiques et expérimentaux concordaient bien les uns avec les autres, s'écartant en moyenne de moins de 10%. Le modèle a ensuite été utilisé pour optimiser les propriétés physiques des mousses afin de produire un échangeur de chaleur qui maximise les performances thermiques tout en minimisant la puissance hydraulique requise. Les résultats montrent que pour une perte de charge de 50 kPa, la résistance thermique d'un échangeur de chaleur en mousse métallique est de 0,127 K/W. Les mousses métalliques sont donc un matériau d'échangeur de chaleur viable et le modèle proposé dans ce travail peut être utilisé comme un moyen rapide et peu coûteux d'optimisation des performancesSeveral decades ago, power electronics (PE) emerged as an important discipline in the world of electrical engineering. Thanks to regular technological advancements, namely the use of "wide band gap" materials for semiconductors, PE devices have become more compact and efficient, but this has unfortunately resulted in a reduced thermal management. Thus, as a collaborated effort between G2Elab, LEGI and SIMAP, this work has studied the use of metal foam as a novel heat exchanger used in a forced-convection cooling system that can be integrated into PE modules for superior cooling. Metal foams are lightweight, have low densities, high specific surface areas, an open-celled structure and good thermal properties. They are typically categorised by their porosity (ε), their pore density (PPI, pores per inch) and by the diameter of the solid fibres (df). The advantages to heat transfer arise from the possibility of an increased specific surface area over other heat exchangers, such as microchannels, and from the tortuous microstructure that generates flow turbulence and improves convective transfers within the coolant. Thermal performances were modelled by developing an analytical model that considered the heat exchangers as a network of resistances in series. This was achieved by simplifying the LTNE equations that govern energy transfer through the solid a fluid phases. The model was initially compared with numerical simulations and experimental results from the scientific literature, where it performed well. As an additional level of validation, an experimental test bench was designed and assembled in-house. Thermal performances was ascertained by using thermocouples to measure the temperature profile of the solid and fluid phases, and hydraulic properties were found by measuring the pressure drop across the heat exchangers. Analytical and experimental results agreed well with each other, deviating on average by less than 10%. The model was then used to optimise the foams physical properties in order to produce a heat exchanger that maximises thermal performances whilst minimising the required hydraulic power. The results show that for a pressure drop of 50kPa, the thermal resistance of a metal foam heat exchanger is 0.127 K/W. Metal foams are thus a viable heat exchanger material and the model proposed in this work can be used as a quick and inexpensive means of performance optimisation
49
Schoedel, Alexander. "[M3(μ3-O)(O2CR)6] and Related Trigonal Prisms: Versatile Molecular Building Blocks for 2-Step Crystal Engineering of Functional Metal-Organic Materials." Scholar Commons, 2014. https://scholarcommons.usf.edu/etd/5121.
Full textAbstract:
Metal-organic materials (MOMs) assembled from metal-based building blocks and organic linkers have attracted much interest due to their large pore dimensions and their enormous structural diversity. In comparison to their inorganic counterparts (zeolites), these crystalline materials can be easily modified to tailor pore dimensions and functionality for specifically targeted properties.
The work presented herein encompasses the development of a synthetic 2-step process for the construction of novel families of MOMs or 'platforms' and allow us exquisite design and control over the resulting network topologies. Examples of cationic mesoporous structures were initially exploited, containing carboxylate based centers connected by metal-pyridine bonds. The inherently cationic nets allowed for subsequent anion exchange which can be regarded as an elegant and easy postsynthetic modification strategy. The incorporation of different functionalities inside the channels of the networks was then demonstrated as useful in terms of carbon dioxide capture.
The scope of the 2-step process was then expanded to construction of the first trinodal MOM platform involving triangular, tetrahedral and trigonal prismatic building units: tp-PMBB-1-asc. Examples of reticular chemistry are shown which enable the formation of large and functionalized nanocages with retention of the underlying network topology. Gas adsorption studies indicate relatively high uptakes of carbon dioxide and hydrogen which, together with the use of inexpensive ligands, provide an excellent cost/performance ratio of these materials. Moreover, very high stability in organic solvents and especially in water are addressed which is a particularly challenging, but industrially relevant target in the field of Metal-Organic Materials.
The 2-step approach was also used to synthesize a new and versatile class of metal-organic materials with augmented lonsdaleite-e (lon-e-a) topology. This family of lon-e nets is built by pillaring of hexagonal 2-dimensional kagomé (kag) lattices that are in turn pillared by a trigonal prismatic Primary Molecular Building Block (tp-PMBB-1). These MOMs represent the first examples of axial-to-axial-pillared undulating kag layers and they are readily fine-tuned because the bdc2- moieties can be varied at their 5-position without changing the overall structure. This lon-e platform possesses functionalized hexagonal channels since the kag lattices are necessarily eclipsed. The effect of the substituent at the 5-positions of the bdc2- linkers upon gas adsorption, particularly the heats of adsorption of carbon dioxide and methane, were studied.
If linear dicarboxylates were instead utilized, we were able to synthesize a new and versatile class of metal-organic materials that exhibits 4,6-connected fsb topology. These networks are constructed from simple and inexpensive building units and since interpenetration is precluded, afford very high void volumes. They therefore represent ideal targets to generate a novel family of frameworks, because of the ready availability functionalized and expanded ligand derivatives. They also allow for systematic fine tuning and could ultimately provide a roadmap to ultra-high surface areas from simple building blocks.
50
Elsaidi, Sameh Khamis. "Crystal Engineering of Functional Metal-Organic Material Platforms for Gas Storage and Separation Applications." Scholar Commons, 2014. https://scholarcommons.usf.edu/etd/5417.
Full textAbstract:
Metal-organic materials (MOMs) represent a unique class of porous materials that captured a great scientific interest in various fields such as chemical engineering, physics and materials science. They are typically assembled from metal ions or metal clusters connected by multifunctional organic ligands. They represent a wide range of families of materials that varied from 0D to 3D networks: the discrete (0D) structures exemplified by metal-organic polyhedra (MOPs), cubes and nanoballs while the polymeric 1D, 2D and 3D structures exemplified by coordination polymers (CPs). Indeed, the porous 3D structures include metal-organic frameworks (MOFs), porous coordination polymers (PCPs) and porous coordination networks (PCNs). Nevertheless, MOMs are long and well-known from more than 50 years ago as exemplified by CPs that were firstly introduced in early 1960s and reviewed in 1964. However, the scientific interest toward MOMs has been enormously grown only since late 1990s, with the discovery of MOMs with novel properties, especially the high permanent porosity as exemplified by MOF-5 and HKUST-1. The inherent tunability of MOMs from the de novo design to the post-synthetic modification along with their robustness, afford numerous important families of nets "platforms" such as pcu, dia, tbo, mtn and rht topology networks.
There are more than 20,000 crystal structures of MOMs in the Cambridge Structure Database (CSD). However, only a few of the networks can be regarded as families or platforms where the structure is robust, fine-tunable and inherently modular. Such robustness and inherent modularity of the platforms allow the bottom-up control over the structure "form comes before function" which subsequently facilitates the systematic study of structure/function in hitherto unprecedented way compared with the traditional screening approaches that are commonly used in materials science. In this context, we present the crystal engineering of two MOM platforms; dia and novel fsc platforms as well we introduce the novel two-step synthetic approach using trigonal prismatic clusters to build multinodal 2D and 3D MOM platforms.
For the dia platform, we introduce a novel strategy to control over the level of the interpenetration of dia topology nets via solvent-template control and study the impact of the resulting different pore sizes on the squeezing of CH4, CO2 and H2 gases. New benchmark material for methane isosteric heat of adsorption was produced from this novel work.
Indeed we introduce the crystal engineering of a novel versatile 4,6-c fsc platform that is formed from linking two of the longest known and most widely studied MBBs: the square planar MBB [Cu(AN)4]2+( AN = aromatic nitrogen donor) and square paddlewheel MBB [Cu2(CO2R)4] that are connected by five different linkers with different length, L1-L5. The resulting square grid nets formed from alternating [Cu(AN)4]2+ and [Cu2(CO2R)4] moieties are pillared at the axial sites of the [Cu(AN)4]2+ MBBs with dianionic pillars to form neutral 3D 4,6-connected fsc (four, six type c) nets. Pore size control in this family of fsc nets was exerted by varying the length of the linker ligand whereas pore chemistry was implemented by unsaturated metal centers (UMCs) and the use of either inorganic or organic pillars. 1,5-naphthalenedisulfonate (NDS) anions pillar in an angular fashion to afford fsc-1-NDS, fsc-2-NDS, fsc-3-NDS, fsc-4-NDS and fsc-5-NDS from L1-L5, respectively. Experimental CO2 sorption studies revealed higher isosteric heat of adsorption (Qst) for the compound with the smaller pore size (fsc-1-NDS). Computational studies revealed that there is higher CO2 occupancy about the UMCs in fsc-1-NDS compared to other extended variants that were synthesized with NDS. SiF62- (SIFSIX) anions in fsc-2-SIFSIX form linear pillars that result in eclipse [Cu2(CO2R)4] moieties at a distance of just 5.86 Å. The space between the [Cu2(CO2R)4] moieties is a strong CO2 binding site that can be regarded as being an example of a single-molecule trap; this finding has been supported by modeling studies.
Furthermore, we present herein the implementation of the two-step synthetic approach for the construction of novel multinodal MOM platforms, using the trigonal prism cluster [M3(µ3-O)(RCO2)6] as a precursor to build novel stable multinodal 2D and 3D frameworks. In the first step, the bifunctional carboxylate ligands are reacted with Fe+3 or Cr+3 salts to isolate highly symmetrical decorated trigonal prismatic clusters with diverse decoration such as pyridine, amine and cyano coordinating functional groups using pyridine carboxylate, amino carboxylate, cyano carboxylate type ligands, respectively. Afterward, the isolated highly soluble trigonal prismatic salts were reacted in the second step with another metal that can act as node or linker to connect the discrete trigonal prismatic clusters to build 2D or 3D networks. Indeed, we were able to develop another novel high-symmetry Cu cluster [Cu3(µ3-Cl)(RNH2)6Cl6] by utilizing CuCl2 salt and amine decorated trigonal prismatic cluster. Two novel 3D water stable frameworks with acs and stp topologies have been afforded.
Our work on the crystal engineering design and synthesis of new MOM platforms offer an exceptional level of control over the resulting structure including; the resulting topology, pore size, pore chemistry and thereby enable the control over the resulting physicochemical properties in a manner that facilitates the achieving of the desired properties.