Academic literature on the topic 'Metal cladding'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Metal cladding.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Metal cladding"
Viňáš, Ján, Miroslav Greš, and Tomáš Vaško. "Cladding of Wear-Resistant Layers in Metallurgy and Engineering." Materials Science Forum 862 (August 2016): 41–48. http://dx.doi.org/10.4028/www.scientific.net/msf.862.41.
Full textPeng, De-Xing, and Yuan Kang. "Wear behavior of ceramic powder and nano-diamond cladding on carbon steel surface." Industrial Lubrication and Tribology 66, no. 2 (March 4, 2014): 272–81. http://dx.doi.org/10.1108/ilt-11-2011-0101.
Full textWang, Kai, Yongjun Shi, Xiaoyu Zhou, Changmin Zhai, Yankuo Guo, and Jianfeng Jiang. "Microstructure and properties of NiCrBSi coating formed by ultrasonic vibration combined with induction cladding." Metallurgical Research & Technology 119, no. 2 (2022): 205. http://dx.doi.org/10.1051/metal/2022017.
Full textYue, Kun, Guofu Lian, Meiyan Feng, and Youji Zhan. "Investigation on the effect of powder size on the properties of cladding layer based on RSM." Metallurgical Research & Technology 119, no. 1 (2022): 113. http://dx.doi.org/10.1051/metal/2022003.
Full textLekhov, O. S., A. V. Mikhalev, and M. M. Shevelev. "PRODUCTION OF THREE-LAYER STEEL BIMETALLIC STRIPS IN THE UNIT OF CONTINUOUS CASTING AND DEFORMATION. REPORT 2." Izvestiya. Ferrous Metallurgy 62, no. 10 (November 3, 2019): 763–68. http://dx.doi.org/10.17073/0368-0797-2019-10-763-768.
Full textZhang, Wei, and Jian Hua Yao. "Research on Technics of Laser Direct Metal Deposition Forming Technology." Advanced Materials Research 69-70 (May 2009): 54–58. http://dx.doi.org/10.4028/www.scientific.net/amr.69-70.54.
Full textCao, Qiang, Guo-fu Lian, Chang-rong Chen, and Mei-yan Feng. "Sensitivity analysis of the process parameters of laser cladding NiCrCoAlY." Metallurgical Research & Technology 119, no. 2 (2022): 206. http://dx.doi.org/10.1051/metal/2022015.
Full textSoodi, Mehdi, S. H. Masood, and Milan Brandt. "A Study of Laser Cladding with 420 Stainless Steel Powder on the Integrity of the Substrate Metal." Advanced Materials Research 230-232 (May 2011): 949–52. http://dx.doi.org/10.4028/www.scientific.net/amr.230-232.949.
Full textPeyre, Patrice. "Additive Layer Manufacturing using Metal Deposition." Metals 10, no. 4 (April 1, 2020): 459. http://dx.doi.org/10.3390/met10040459.
Full textLam, Y. W. "Noise Transmission Through Profiled Metal Cladding Part III: Double-Skin SRI Prediction." Building Acoustics 2, no. 2 (June 1995): 403–17. http://dx.doi.org/10.1177/1351010x9500200201.
Full textDissertations / Theses on the topic "Metal cladding"
Yevko, Vladimir. "Cladding formation in laser-beam fusion of metal powder." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk2/tape17/PQDD_0007/MQ33971.pdf.
Full textYang, Wen Fu. "Laser cladding surface treatment for enhancement of mechanical properties." Thesis, Peninsula Technikon, 2003. http://hdl.handle.net/20.500.11838/1267.
Full textSystematic laser cladding experiments were performed using a mixture of a Nickel base alloy powder mixed with tungsten carbide powder (percentage contents of tungsten carbide from 10% to 40%) on EN8 steel substrate with pre-placed powder method. Laser cladding of the Nickel base alloy powder + 50% tungsten carbide powder on EN9 steel substrate was performed with powder injection method as well. A Finite Element Method for calculating the surface temperature distribution was used to help prediction of temperature distribution laser cladding results. Composition of cladding materials was designed; a sticking agent was chosen for the pre-placed powder method. Clad coatings were obtained for different process parameters for laser cladding, and a detailed study of the affects of these parameters has been carried out. The characteristic microstructure and properties of the clad layers and interface were investigated by using an optical microscope, a micro hardness tester and a makeshift wear test. A comprehensive review is presented on the dilution of the coating and the typical problems experienced with the coating substrate interface. The results show that microstructure of clad layers comprise three zones: the cladding layer, bonding zone and heat-affected zone. The results showed that tungsten carbide particles increased the hardness and wear resistance as expected. Wear resistance of laser cladding coating is 3.5 times than that of substrate. The micro hardness range of the cladding layer is from RV 981.5 to RV 1187, which is 2-3 times than that of substrate. The micro hardness varies from cladding coating to transition layer then to heat affected zone and substrate along a gradient.
Salehi, Dariush, and ds_salehi@yahoo com. "Sensing and control of Nd:YAG laser cladding process." Swinburne University of Technology, 2005. http://adt.lib.swin.edu.au./public/adt-VSWT20050915.142812.
Full textStephan, Hendrik Christoffel. "Investigation of a testing approach for trapezoidal crest fastened metal cladding." Thesis, Stellenbosch : Stellenbosch University, 2013. http://hdl.handle.net/10019.1/80018.
Full textENGLISH ABSTRACT: Low-rise buildings with crest fastenedmetal cladding are susceptible to failures in the vicinity of the fasteners during strongwind uplift conditions. These localised failures often lead to the progressive removal of cladding, which can cause disastrous building damage. In South Africa, the current metal cladding design approach is inadequate, since it solely relies upon manufacturer design specifications. These specifications are typically designated as broad design guidelines for the maximum allowable cladding support spacings which are independent from any specified design loads. This research focuses on the investigation of 0.50 mm ISQ550 IBR cladding systems to understand basic cladding behaviour during static wind uplift conditions and to quantify the uplift performance of IBR systems. The research investigation also included the improvement and performance evaluation of a full-scale cladding test method which applies an air-bag loading method to simulate static wind uplift conditions according to the revised SANS 10237:201X code of practice. This thesis may serve as a basis for further cladding research, and the development of suitable standardised metal cladding test methods in South Africa. Several experimental investigation methods and limited finite element analyses (FEA) were used to investigate IBR and the performance of the test methods. Tensile testing was used to determine the material properties of the cladding metal. The full-scale cladding assembly testing was used to investigate the behaviour of IBR and to evaluate the performance of the air-bag test rig. The localised behaviour of the cladding around the fasteners was also investigated with a small cladding subassembly test method. The FEA served as a supplementary investigation for IBR performance evaluation. The experimental investigation confirmed that the static wind uplift resistances of IBR systems are mainly governed by localised deformations of their fastened crests and fastener pull-through failures. The behaviour and performance of IBR systems are heavily dependent on the crest fastening arrangement. IBR systems with every crest fastening demonstrated a considerably higher wind uplift resistance than IBR systems with the standard alternate crest fastening arrangement. The measured fastener loads were independent from span length, whereas the overall uplift resistance of IBR reduced with increased span lengths. Load-span resistance data for 0.50 mm ISQ550 IBR was derived from testing to provide a rational framework for design. The FEA provided a reasonable simulation of IBR subjected to static wind uplift and confirmed the presence of high stress and strain concentrations around the fastener holes which cause fastener pull-through failures. Therefore, FEA can be used as an effective tool to investigate the behaviour of IBR. In conclusion, the air-bag test method used in this research investigation provided an effective method for evaluating the uplift performance of crest fastened metal cladding. However, the air-bag load method is not capable of accurately simulating a true uniformly distributed uplift load. It is recommended that direct air pressure testing be adopted for any further research or commercial testing ofmetal cladding because direct air pressure testing is an effective and proven test method for accurate simulation of static and cyclic wind uplift conditions.
AFRIKAANSE OPSOMMING: Metaalbekleding met kruinvashegting op lae geboue is geneig om te faal by die vashegters tydens toestande van sterkwind-opheffing. As vashegters faal kan bekleding progressief verwyderwordomrampspoedige skade aan die gebou te veroorsaak. Die huidige ontwerpmetode vir metaalbekleding in Suid-Afrika is onvoldoende, aangesien dit slegs gegrond is op vervaardigers se ontwerpspesifikasies. Spesifikasies word gewoonlik verklaar as breë ontwerpriglyne vir die maksimum toelaatbare spasiërings van ondersteunings sonder enige oorwegings vir ontwerpbelastings. Hierdie navorsing fokus dus op 0.50mm ISQ550 IBR metaalbekleding omdie basiese gedrag van bekleding tydens wind-opheffing beter te verstaan en die ophefweerstand van IBR te kwantifiseer vir ontwerpdoeleindes. Verder ondersoek hierdie navorsing ook die verbetering en evaluasie van ’n volskaalse bekledingstoetsmetode wat statiese wind-opheffing naboots met verspreide lugsakbelasting volgens die hersiende SANS 10237:201X gebruikskode. Hierdie proefskrif kan dien as ’n grondslag vir verdere navorsing en die ontwikkeling van geskikte standaard-toetsmetodes vir metaalbekleding in Suid-Afrika. Verskeie eksperimentele toetsmetodes en beperkte eindige-element-analises (EEA) is gebruik om die gedrag van IBR en die toets-opstellings te ondersoek. Trektoetse is gebruik om die meganiese eienskappe van die bekledingsmetaal te bepaal. Volskaalse toets-opstellings is gebruik om die weerstand van IBR te ondersoek en die lugsaktoetsmetode te evalueer. Die gelokaliseerde gedrag van die bekleding rondom die vashegters was ook ondersoek met klein toets-opstellings. EEA het gedien as ’n aanvullende ondersoek om die gedrag van IBR te evalueer. Die eksperimentele ondersoek het bevestig dat die wind-ophefweerstande van IBR-stelsels hoofsaaklik bepaal word deur gelokaliseerde deformasies van die vasgehegde kruine en die vashegters se deurtrekweerstand. Die gedrag en weerstand van IBR-stelsels is ook grootliks afhanklik van die toegepaste vashegtingsmetode. IBR stelsels met vashegting deur elke kruin het ’n hoër ophefweerstand verskaf as IBR-stelsels met die standaard vashegtingsmetode deur elke tweede kruin. Die gemete vashegterbelastings was onafhanklik van die spanlengtes, terwyl die algehele ophefweerstand van IBR verminder het vir langer spanlengtes. Toetsdata is gebruik om ophefweerstande vir 0.50mm ISQ550 IBR oor verskeie spanlengtes af te lei sodat ’n rasionele raamwerk vir ontwerp bewerkstellig kan word. Die EEA het die gedrag van IBR tydens toestande van statiese wind-opheffing redelik goed nageboots en het ook die teenwoordigheid van hoë spannings- en vervormingskonsentrasies rondom die vashegtergate, wat vashegters laat deurtrek, bevestig. Daarom kan EEA as ’n effektiewe instrument gebruik word om die gedrag van IBR te ondersoek. Ten slotte word dit afgelei dat die lugsaktoetsmetode van hierdie navorsingsondersoek ’n effektiewe metode verskaf het vir die gedrag-evaluering van kruinvasgehegte bekleding tydens wind-opheffing. Die lugsaktoetsmetode kan egter nie ’n ware gelykverspreide ophefbelasting naboots nie. Daarom word dit voorgestel dat toetsmetodes wat direkte lugdruk aanwend gebruik moet word vir enige verdere navorsing of kommersiële toetse van metaalbekleding, aangesien dit ’n effektiewe en bevestigde toetsmetode is wat statiese en sikliese opheftoestande akkuraat kan naboots.
Krishnamurthy, Vivek. "Theoretical investigation of photonic crystal and metal cladding for waveguides and." Diss., Atlanta, Ga. : Georgia Institute of Technology, 2009. http://hdl.handle.net/1853/28214.
Full textCommittee Chair: Klein, Benjamin; Committee Member: Alavi, Kambiz; Committee Member: Allen, Janet K.; Committee Member: Buck, John; Committee Member: Gaylord, Tom; Committee Member: Yoder, Douglas.
Windle, Richard Michael. "The prediction of industrial noise and its transmission through metal cladding systems." Thesis, University of Salford, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.308378.
Full textPinelli, Jean-Paul. "Development of energy dissipating cladding connections for passive control of building seismic response." Diss., Georgia Institute of Technology, 1992. http://hdl.handle.net/1853/19429.
Full textEl-Gazairly, Loai F. "Three dimensional nonlinear dynamic response of an RC structure with advanced cladding." Diss., Georgia Institute of Technology, 1993. http://hdl.handle.net/1853/20812.
Full textKalligerakis, Kostas. "Stainless steel cladding of mild steel shafts using pulsed metal-inert-gas welding techniques." Thesis, University of Southampton, 1990. https://eprints.soton.ac.uk/411151/.
Full textNguyen, Quan Viet. "Seismic Energy Dissipation of Steel Buildings Using Engineered Cladding Systems." Amherst, Mass. : University of Massachusetts Amherst, 2009. http://scholarworks.umass.edu/theses/373/.
Full textBooks on the topic "Metal cladding"
P, Wolstenholme R., Howell D. M, W. S. Atkins and Partners., and Great Britain. Construction Sponsorship Directorate., eds. Durability of cladding. London: Thomas Telford, 1994.
Find full textM, Albon J., and Garner N. K, eds. Coated metal roofing and cladding. London: Thomas Telford, 1997.
Find full textAmir, Khajepour, and Corbin Stephen, eds. Laser cladding. Boca Raton, Fl: CRC Press, 2005.
Find full textRyan, P. A. Durability of cladding: A state of the art report. London: T. Telford, 1994.
Find full textEngineers, Institution of Structural, and Structural Engineers Trading Organisation, eds. Aspects of cladding. London: SETO, 1995.
Find full textSmith, L. M. CASTI handbook of cladding technology. 2nd ed. Edmonton: CASTI Pub., 2000.
Find full textSmith, L. M. Practical handbook of cladding technology. Edited by Celant Mario. Edmonton: CASTI Pub., 1998.
Find full textSexton, Cornelius L. Rapid alloy scanning by laser cladding. Aachen: Shaker, 1995.
Find full textD, Sisson R., American Society for Metals. Energy Division., and American Society for Metals. Coatings Committee., eds. Coatings and bimetallics for aggressive environments: Conference proceedings : Conference on Coatings and Bimetallics for Energy Systems and Chemical Process Environments, Hilton Head, South Carolina, 12-14 November, 1984. [Metals Park, Ohio]: ASM, 1985.
Find full textWindle, Richard Michael. The prediction of industrial noise and its transmission through metal cladding systems. Salford: University of Salford, 1995.
Find full textBook chapters on the topic "Metal cladding"
Watts, Andrew. "Profiled Metal Cladding." In Modern Construction Envelopes, 24–33. Vienna: Springer Vienna, 2011. http://dx.doi.org/10.1007/978-3-7091-0258-9_2.
Full textWang, Xianping, Cheng Yin, and Zhuangqi Cao. "Symmetrical Metal-Cladding Waveguide." In Springer Tracts in Modern Physics, 145–62. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-662-48984-0_6.
Full textBocchetta, Patrizia, Katy Voisey, Liana Anicai, Teodor Visan, and Filippo Selleri. "Corrosion Protection of Metal Alloys by Laser Cladding." In Laser Cladding of Metals, 185–213. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-53195-9_7.
Full textYao, Jianhua, Qunli Zhang, Rong Liu, and Guolong Wu. "Laser Cladding of Metal-Ceramic Composites." In Advanced Topics in Science and Technology in China, 59–81. Singapore: Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-8922-2_3.
Full textMehrtens, Peter. "Rapid On-site Fabrication of Customized Freeform Metal Cladding Panels." In Rob | Arch 2012, 309–15. Vienna: Springer Vienna, 2013. http://dx.doi.org/10.1007/978-3-7091-1465-0_40.
Full textSchmieder, Markus, and Peter Mehrtens. "Cladding Freeform Surfaces with Curved Metal Panels — a Complete Digital Production Chain." In Advances in Architectural Geometry 2012, 237–42. Vienna: Springer Vienna, 2013. http://dx.doi.org/10.1007/978-3-7091-1251-9_19.
Full textAmado, J. M., M. J. Tobar, and A. Yáñez. "Laser cladding of NiCr-WC metal matrix composites: dependence on the matrix composition." In Proceedings of the 36th International MATADOR Conference, 459–62. London: Springer London, 2010. http://dx.doi.org/10.1007/978-1-84996-432-6_102.
Full textWells, Daniel M., Richard Becker, Jiaxin Chen, Clara Anghel, Dennis Hussey, Jayashri Iyer, and Jacqueline Stevens. "Out-of-Reactor Test of Corrosion and Hydrogen Pickup in Fuel Cladding Materials in Contact with Nickel Metal." In Zirconium in the Nuclear Industry: 18th International Symposium, 281–311. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2018. http://dx.doi.org/10.1520/stp159720160038.
Full textBernhard, Robert, Philipp Neef, Henning Wiche, Volker Wesling, Christian Hoff, Jörg Hermsdorf, and Stefan Kaierle. "Laser Cladding – Additive Manufacturing." In Laser Cladding of Metals, 1–8. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-53195-9_1.
Full textGanjali, Monireh, Mansoureh Ganjali, S. K. Sadrnezhaad, and Yousef Pakzad. "Laser Cladding of Ti Alloys for Biomedical Applications." In Laser Cladding of Metals, 265–92. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-53195-9_10.
Full textConference papers on the topic "Metal cladding"
IGOSHIN, Sergei, Dmitriy MASAYLO, Artem KIM, and Anatoliy POPOVICH. "In-situ synthesis Ni-Ti alloy by laser cladding." In METAL 2020. TANGER Ltd., 2020. http://dx.doi.org/10.37904/metal.2020.3519.
Full textVOSTŘÁK, Marek, Šárka HOUDKOVÁ, Josef DULIŠKOVIČ, Matěj HRUŠKA, and Jiří HALML. "Laser cladding of TIN based coatings for industrial bearings application." In METAL 2020. TANGER Ltd., 2020. http://dx.doi.org/10.37904/metal.2020.3573.
Full textČejková, Petra, Antonín Kříž, Karel Brom, and Petr Steidl. "High-temperature tribological protection of laser cladding materials for power generation components." In METAL 2020. TANGER Ltd., 2020. http://dx.doi.org/10.37904/metal.2020.3577.
Full textAbbas, Ghazanfar, and David R. F. West. "Laser Produced Composite Metal Cladding." In 1989 Intl Congress on Optical Science and Engineering, edited by Michel Gaillard and A. Quenzer. SPIE, 1989. http://dx.doi.org/10.1117/12.961585.
Full textKARŞI, Adem, Meryem ALTAY, Dilara ERGİN, and Hakan AYDIN. "EFFECT OF ENERGY INPUT ON POROSITY AND MICROHARDNESS IN LASER CLADDING COATING ON FGS600-3A DUCTILE CAST IRON." In METAL 2022. TANGER Ltd., 2022. http://dx.doi.org/10.37904/metal.2022.4414.
Full textFRKOVÁ, Petra, Šárka HOUDKOVÁ, Marek VOSTŘÁK, and Jiří HALML. "The development of alternative method of coating of sliding surface on hydrodynamic bearing by thermal spraying and laser cladding." In METAL 2019. TANGER Ltd., 2019. http://dx.doi.org/10.37904/metal.2019.733.
Full textMASAYLO, Dmitriy, Sergei IGOSHIN, and Anatoliy POPOVICH. "INVESTIGATION OF THE MICROSTRUCTURE AND PROPERTIES OF THE AISI H13 TOOL STEEL TI-MODIFIED POWDER DURING LASER CLADDING PROCESS UNDER NITROGEN." In METAL 2021. TANGER Ltd., 2021. http://dx.doi.org/10.37904/metal.2021.4132.
Full textLeyens, Christoph, Frank Brückner, and Steffen Nowotny. "Innovations in Laser Cladding and Direct Metal Deposition." In Laser and Tera-Hertz Science and Technology. Washington, D.C.: OSA, 2012. http://dx.doi.org/10.1364/ltst.2012.mf2b.1.
Full textJendrzejewski, Rafal, Grazyna T. Rabczuk, R. Zaremba, and Gerard Sliwinski. "Laser stereolithography by multilayer cladding of metal powders." In Second GR-I International Conference on New Laser Technologies and Applications, edited by Alexis Carabelas, Paolo Di Lazzaro, Amalia Torre, and Giuseppe Baldacchini. SPIE, 1998. http://dx.doi.org/10.1117/12.316613.
Full textBrückner, Frank, Steffen Nowotny, and Christoph Leyens. "Innovations in laser cladding and direct metal deposition." In SPIE LASE, edited by Eckhard Beyer and Timothy Morris. SPIE, 2012. http://dx.doi.org/10.1117/12.906706.
Full textReports on the topic "Metal cladding"
Messner, M. C., V. T. Phan, B. Barua, T. L. Sham, and R. I. Jetter. Finite element analysis of compliant cladding and base metal systems. Office of Scientific and Technical Information (OSTI), July 2018. http://dx.doi.org/10.2172/1480529.
Full textCaraher, D. L., and R. W. Shumway. Metal-water reaction and cladding deformation models for RELAP5/MOD3. Office of Scientific and Technical Information (OSTI), June 1989. http://dx.doi.org/10.2172/5780778.
Full textHudman, G. D., D. D. Keiser, and D. L. Porter. Ex-reactor testing for carbon loss from HT9 cladding in the presence of metal fuels. Office of Scientific and Technical Information (OSTI), June 1987. http://dx.doi.org/10.2172/713759.
Full text(Method and apparatus for applying metal cladding). Office of Scientific and Technical Information (OSTI), July 1990. http://dx.doi.org/10.2172/6723779.
Full text