Books on the topic 'Mechanical technique'

G, Keith Theodore, United States. Army Aviation Research and Technology Activity., and United States. National Aeronautics and Space Administration., eds. Applications of an exponential finite difference technique. [Washington, DC]: National Aeronautics and Space Administration, 1988.

Mechanical design. 2nd ed. Oxford: Burlington, MA, 2004.

Ashby, M. F. Materials selection in mechanical design. Oxford: Pergamon Press, 1992.

Materials selection in mechanical design. 3rd ed. Amsterdam: Elsevier Butterworth-Heinemann, 2005.

Joanne, Stryker, ed. Drawing: Structure and vision. Upper Saddle River, N.J: Pearson Prentice Hall, 2009.

Bethune, James D. Essentials of drafting. 2nd ed. Englewood Cliffs, N.J: Prentice-Hall, 1987.

Alain, Mercier. Le portefeuille de Vaucanson: Chefs-d'oeuvre du déssin technique. Paris: Musée national des techniques : Conservatoire national des arts et métiers, 1991.

Thorne, Robert M. Intentional site burial: A technique to protect against natural or mechanical loss. [Washington, DC]: U.S. Dept. of the Interior, National Park Service, 1991.

United States. National Park Service. Archeological Assistance Division, ed. Intentional site burial: A technique to protect against natural or mechanical loss. [Washington, D.C.]: U.S. Dept. of the Interior, National Park Service, 1991.

Lahti, Tapio. Measurement of reflection and impedance in a beam by the structural intensity technique. Espoo: Technical Research Centre of Finland, 1989.

1869-, Giesecke Frederick Ernest, ed. Technical drawing. 8th ed. New York: Macmillan, 1986.

Gascoigne, Bamber. How to identify prints: A complete guide to manual and mechanical processes from woodcut to inkjet. 2nd ed. New York: Thames & Hudson, 2004.

How to identify prints: A complete guide to manual and mechanical processes from woodcut to ink jet. [London]: Thames and Hudson, 1986.

J, Artaud, and Institut national de recherche pédagogique (France). Département Etudes et recherches sur les enseignements technologiques., eds. L' Apprentissage de la géométrie du dessin technique: Des constats d'échec et des moyens de réussite. Paris: Institut national de recherche pédagogique, 1985.

Drawing and perceiving: Life drawing for students of architecture and design. 3rd ed. New York: Wiley, 2001.

Douglas, Cooper. Drawing and perceiving: Life drawing for students of architecture and design. 4th ed. Hoboken: Wiley, 2007.

Douglas, Cooper. Drawing and perceiving. 2nd ed. New York: Van Nostrand Reinhold, 1992.

Suryanarayana, C. Experimental techniques in materials and mechanics. Boca Raton: CRC Press, 2011.

author, Phillips Terry, ed. Moving into mechanical engineering: Course book. Reading, UK: Garnet Publishing Ltd, 2016.

Grigore, Gogu, ed. Recent advances in integrated design and manufacturing in mechanical engineering. Boston: Kluwer Academic Publishers, 2003.

Bartos, Karen F. A three-dimensional finite-element thermal/mechanical analytical technique for high-performance traveling wave tubes. Cleveland, Ohio: Lewis Research Center, 1991.

F, Bartos Karen, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Program., eds. A three-dimensional finite-element thermal/mechanical analytical technique for high-performance traveling wave tubes. Cleveland, Ohio: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1991.

F, Bartos Karen, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Program., eds. A three-dimensional finite-element thermal/mechanical analytical technique for high-performance traveling wave tubes. Cleveland, Ohio: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1991.

N, Sharpe William, American Society of Mechanical Engineers. Winter Meeting., and American Society of Mechanical Engineers. Experimental Mechanics Committee., eds. Micromechanics: Experimental techniques : presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, San Francisco, California, December 10-15, 1989. New York, N.Y: American Society of Mechanical Engineers, 1989.

Handschuh, Robert F. An exponential finite difference technique for solving partial differential equations. [Washington, D.C.]: National Aeronautics and Space Administration, 1987.

Engineering mechanics and design applications: Transdisciplinary engineering fundamentals. Boca Raton, FL: CRC Press, 2012.

Engineering drawing and design. Albany, N.Y: Delmar Publishers, 1991.

P, Madsen David, and Turpin J. Lee, eds. Engineering drawing & design. 5th ed. Clifton Park, NY: Delmar Thomson Learning, 2007.

1934-, Hundal Mahendra S., ed. Mechanical life cycle handbook: Good environmental design and manufacturing. New York: Marcel Dekker, 2002.

Jürgen, Harms. Instrumented spinal surgery: Principles and technique. Stuttgart: Thieme, 1999.

Saint-Théotiste, soeur, C.N.D., m. 1927. and Congrégation de Notre-Dame, eds. Enseignement du dessin linéaire [microforme]: Adapté au cours d'études de la Congrégation de Notre-Dame de Montréal. Montréal: Lovell, 1993.

Design and optimization of thermal systems. 2nd ed. Boca Raton: CRC Press, 2008.

Jaluria, Yogesh. Design and optimization of thermal systems. New York: McGraw-Hill Co., 1998.

Turbulent premixed flames. Cambridge: Cambridge University Press, 2011.

Sceno-graphic techniques. 3rd ed. Carbondale: Southern Illinois University Press, 1987.

Balakrishnan, K. S. Evaluation of the mechanical properties of SA 333 Gr.6, AISI 304 and Zr-2.5% Nb through automated ball indentation (ABI) technique. Mumbai: Bhabha Atomic Research Centre, 2009.

Mechanical Engineering Services: Plumbing. Blackwell Science Inc, 1989.

Bensamoun, Sabine. Mechanical Properties of Soft Tissues with MR Elastography Technique. Wiley & Sons, Incorporated, John, 2020.

Bensamoun, Sabine. Mechanical Properties of Soft Tissues with MR Elastography Technique. Wiley & Sons, Incorporated, John, 2014.

Adams, Charles Laban. Mechanical Drawing: Technique and Working Methods, for Technical Students. Creative Media Partners, LLC, 2018.

Bensamoun, Sabine. Mechanical Properties of Soft Tissues with MR Elastography Technique. Wiley & Sons, Incorporated, John, 2020.

Materials Selection in Mechanical Design. 2nd ed. Butterworth-Heinemann, 1999.

Bethune, James D. Essentials of Drafting (2nd Edition). 2nd ed. Prentice Hall, 1998.

Bethune, James D. Essentials of Drafting (2nd Edition). Prentice Hall, 1998.

The Eclectic System of Industrial Freehand and Perspective Drawing. Legare Street Press, 2021.

Fundamentals of Engineering Graphics: Si Metric. Mcgraw-Hill Ryerson Ltd, 1988.

Drury, Ralph O., and Joanne Stryker. Drawing: Structure and Vision. Prentice Hall, 2007.

Drury, Ralph O., and Joanne Stryker. Drawing: Structure and Vision. Prentice Hall, 2007.

Allen, James J. Micro Electro Mechanical System Design. Taylor & Francis Group, 2005.

Oxford English for Electrical and Mechanical Engineering. Oxford University Press, 1995.