Log in

Relevant bibliographies by topics / Mechanical Design / Journal articles

To see the other types of publications on this topic, follow the link: Mechanical Design.

Journal articles on the topic 'Mechanical Design'

Author: Grafiati

Published: 4 June 2021

Last updated: 25 May 2024

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Mechanical Design.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Kumar, Prof M. Suresh, T. A. Ajay Chakravarthi, and N. Arun Kumar S. Hariprasaath. "Design and Fabrication of Mechanical Maize Decobber." International Journal of Trend in Scientific Research and Development Volume-2, Issue-3 (April 30, 2018): 276–78. http://dx.doi.org/10.31142/ijtsrd10868.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

宋, 仁杰. "Mechanical Design Methods and Innovative Thinking in Ancient Chinese Classics." Design 03, no. 03 (2018): 59–64. http://dx.doi.org/10.12677/design.2018.33010.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Arafa, H. A. "Mechanical Design Pitfalls." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 220, no. 6 (June 1, 2006): 887–99. http://dx.doi.org/10.1243/09544062jmes185.

Full text

Abstract:

Design pitfalls are defined as those obscure mistakes that can be attributed to negligence or ignorance of particular details and characteristics of the design and, in some cases, the manufacturing processes. This paper presents ten actual cases where a designer could be tempted or misled into design pitfalls that would create weird encounters during assembling or operating mechanical equipment. The pitfalls could have immediate, embarrassing consequences, or eventually lead to hazardous situations and failure in unexpected modes. The consequences of these pitfalls and their remedies are also discussed. The design examples lie in various areas such as gearing and planetary systems, bearings, and fluid power. They are classified under generic headings, some of which are seen to qualify, and are therefore suggested, as design principles, to be added to the repertory. It is deemed that this paper will stimulate further investigations leading to the identification of design pitfalls in these and other areas.

APA, Harvard, Vancouver, ISO, and other styles

4

Reddy, T. Y. "Mechanical engineering design." Journal of Mechanical Working Technology 11, no. 3 (July 1985): 378–79. http://dx.doi.org/10.1016/0378-3804(85)90010-5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Edwards, K. L. "Mechanical engineering design." Materials & Design 15, no. 2 (January 1994): 116–17. http://dx.doi.org/10.1016/0261-3069(94)90047-7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

He, Fa Wei. "Research on Accuracy Design of Mechanical Design." Applied Mechanics and Materials 184-185 (June 2012): 412–16. http://dx.doi.org/10.4028/www.scientific.net/amm.184-185.412.

Full text

Abstract:

Abstract. Mechanical design contains three part: firstly, organization design; according to working requirement of machine, properly choose transmission form and executive body, so as to realize mechanical movement, and the result is showed by mechanical movement diagram. Secondly, structural design; according to machine’s load level, Meeting the request of mechanical strength and service life consider Structure technology and assembly processes, and determine the machine’s parts and assembly drawings. And thirdly, accuracy design; according to the function requirement of machine, select the appropriate dimensional accuracy, shape accuracy and surface roughness, in order meet the requirement, raise product quality, and reduce costs at the same time. There has already been plenty of paper dealing with organization design and structural design, but very few dealing with accuracy design.

APA, Harvard, Vancouver, ISO, and other styles

7

Yoder, Paul R., and R. N. Ckakraborty. "Opto-Mechanical Systems Design." Journal of Optics 22, no. 1 (March 1993): 23–24. http://dx.doi.org/10.1007/bf03549710.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Shadwick, R. E. "Mechanical design in arteries." Journal of Experimental Biology 202, no. 23 (December 1, 1999): 3305–13. http://dx.doi.org/10.1242/jeb.202.23.3305.

Full text

Abstract:

The most important mechanical property of the artery wall is its non-linear elasticity. Over the last century, this has been well-documented in vessels in many animals, from humans to lobsters. Arteries must be distensible to provide capacitance and pulse-smoothing in the circulation, but they must also be stable to inflation over a range of pressure. These mechanical requirements are met by strain-dependent increases in the elastic modulus of the vascular wall, manifest by a J-shaped stress-strain curve, as typically exhibited by other soft biological tissues. All vertebrates and invertebrates with closed circulatory systems have arteries with this non-linear behaviour, but specific tissue properties vary to give correct function for the physiological pressure range of each species. In all cases, the non-linear elasticity is a product of the parallel arrangement of rubbery and stiff connective tissue elements in the artery wall, and differences in composition and tissue architecture can account for the observed variations in mechanical properties. This phenomenon is most pronounced in large whales, in which very high compliance in the aortic arch and exceptionally low compliance in the descending aorta occur, and is correlated with specific modifications in the arterial structure.

APA, Harvard, Vancouver, ISO, and other styles

9

Ashby, Michael F. "Materials in Mechanical Design." MRS Bulletin 18, no. 7 (July 1993): 43–53. http://dx.doi.org/10.1557/s0883769400037520.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

AOYAMA, Hajime, Kazutaka YOKOTA, Kazuyoshi ISHIKAWA, Saori ISHIMURA, Junya SEKI, Yoshinori ADACHI, Yuichi SATSUMI, Asami TAKAHASHI, Yoji ISHIMARU, and Nobusige IMAI. "S201021 Mechanical Design Education." Proceedings of Mechanical Engineering Congress, Japan 2011 (2011): _S201021–1—_S201021–5. http://dx.doi.org/10.1299/jsmemecj.2011._s201021-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Baker, L. R. "Opto-Mechanical Systems Design." Optica Acta: International Journal of Optics 33, no. 11 (November 1986): 1335–36. http://dx.doi.org/10.1080/713821893.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Mattheck, C., and R. Kappel. "Mechanical design after nature." Journal of Biomechanics 39 (January 2006): S348. http://dx.doi.org/10.1016/s0021-9290(06)84384-8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Tobias, Paul A. "Mechanical Reliability and Design." Technometrics 42, no. 2 (May 2000): 207–8. http://dx.doi.org/10.1080/00401706.2000.10486004.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Lemaire, Maurice. "Reliability and mechanical design." Reliability Engineering & System Safety 55, no. 2 (February 1997): 163–70. http://dx.doi.org/10.1016/s0951-8320(96)00083-x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Wright, A. "Opto-mechanical systems design." Optics & Laser Technology 19, no. 1 (February 1987): 48. http://dx.doi.org/10.1016/0030-3992(87)90014-4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Jones, P. L. "Mechanical design failure analysis." Materials Science and Engineering 96 (December 1987): 334–35. http://dx.doi.org/10.1016/0025-5416(87)90580-5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Butler, David L. "Mechanical design in organisms." Journal of Biomechanics 19, no. 8 (January 1986): 679. http://dx.doi.org/10.1016/0021-9290(86)90173-9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

ITO, Koichi. "Optimization in Mechanical Design." Journal of the Society of Mechanical Engineers 91, no. 833 (1988): 338–43. http://dx.doi.org/10.1299/jsmemag.91.833_338.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Carter, A. D. S. "Mechanical reliability by design." Quality and Reliability Engineering International 2, no. 1 (January 1986): 7–17. http://dx.doi.org/10.1002/qre.4680020104.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Galera, Andrés C., Verónica San Miguel, and Juan Baselga. "Magneto-Mechanical Surfaces Design." Chemical Record 18, no. 7-8 (February 23, 2018): 1010–19. http://dx.doi.org/10.1002/tcr.201700073.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Culley, S. J. "The mechanical design process." Design Studies 15, no. 1 (January 1994): 115–16. http://dx.doi.org/10.1016/0142-694x(94)90041-8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Fisher, E. J. "Computer-assisted mechanical design." Mechanism and Machine Theory 26, no. 4 (January 1991): 433. http://dx.doi.org/10.1016/0094-114x(91)90014-u.

Full text

APA, Harvard, Vancouver, ISO, and other styles

23

Kubler, Hans. "Trees—the Mechanical Design." Forest Science 38, no. 1 (February 1, 1992): 210. http://dx.doi.org/10.1093/forestscience/38.1.210.

Full text

APA, Harvard, Vancouver, ISO, and other styles

24

Steckelmacher, W. "Probability applications in Mechanical design: vol. 128 in Mechanical engineering design series." Vacuum 62, no. 4 (June 2001): 389–90. http://dx.doi.org/10.1016/s0042-207x(01)00158-0.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

McCormick, David. "Seeing Mechanical." Mechanical Engineering 129, no. 09 (September 1, 2007): 35–36. http://dx.doi.org/10.1115/1.2007-sep-3.

Full text

Abstract:

This article reviews a case for advancing the role of sketching in the art of engineering. Engineers have adopted productivity tools that promise more predictable outcomes. Computer-aided design, for example, is one of those tools. The evolution of design documentation made a huge advance when engineers no longer defined their designs in the universal graphics language known as orthographic projection drawings. Engineers now create a 3D simulation of the solid design instead of creating 2D representations of views. The 3D CAD process is closer to sculpting the design than drawing it. Sketches are part of a successful design process acting as a channel between creative engineering thinking and critical engineering thinking. Visualizing a design prepares the way to more traditional analytical engineering activities. In this early phase, engineering decisions are being made with little if any data. Intuition is a guide to get the project to a point where data can be collected and analyzed.

APA, Harvard, Vancouver, ISO, and other styles

26

Parkinson, A. "Robust Mechanical Design Using Engineering Models." Journal of Mechanical Design 117, B (June 1, 1995): 48–54. http://dx.doi.org/10.1115/1.2836470.

Full text

Abstract:

This paper examines how engineering models can be used to develop robust designs—designs that can tolerate variation. Variation is defined in terms of tolerances which bracket the expected deviation of model variables and/or parameters. Several methods for robust design are discussed. The method of transmitted variation is explained in detail and illustrated on a linkage design problem and a check valve design problem.

APA, Harvard, Vancouver, ISO, and other styles

27

Parkinson, A. "Robust Mechanical Design Using Engineering Models." Journal of Vibration and Acoustics 117, B (June 1, 1995): 48–54. http://dx.doi.org/10.1115/1.2838676.

Full text

Abstract:

This paper examines how engineering models can be used to develop robust designs—designs that can tolerate variation. Variation is defined in terms of tolerances which bracket the expected deviation of model variables and/or parameters. Several methods for robust design are discussed. The method of transmitted variation is explained in detail and illustrated on a linkage design problem and a check valve design problem.

APA, Harvard, Vancouver, ISO, and other styles

28

Kumbhar, Nilesh Arjun. "Design and Development of Mechanical Ventilator." International Journal for Research in Applied Science and Engineering Technology 9, no. VI (June 30, 2021): 4111–23. http://dx.doi.org/10.22214/ijraset.2021.35905.

Full text

Abstract:

Respiratory diseases and injury-induced respiratory failure constitute a significant public healthiness in both developed and fewer developed countries. Asthma, chronic obstructive pulmonary disease and other chronic respiratory conditions are spread globally. These conditions are exacerbated by pollution , smoking, and burning of biomass for fuel, all of which are on the rise in developing countries1,2 Patients with underlying lung disease may develop respiratory failure under a selection of challenges and should be supported mechanical ventilation. These are machines which mechanically assist patients inspire and exhale, allowing the exchange of oxygen and CO2 to occur within the lungs, a process mentioned as procedure. Design and prototyping of a inexpensive portable mechanical ventilator to be utilized in mass casualty cases and resource-poor environments. The ventilator delivers breaths by compressing a typical bag-valve mask (BVM) with a pivoting cam arm, eliminating the need for an individual's operator for the BVM. Now a days, COVID-19 is one among the main issue goes on, and during this disease ventilator is plays the important role. during this project report, we've focused on to style and development of semi-automatic low cost mechanical ventilator.

APA, Harvard, Vancouver, ISO, and other styles

29

Suh, N. P. "Axiomatic Design of Mechanical Systems." Journal of Mechanical Design 117, B (June 1, 1995): 2–10. http://dx.doi.org/10.1115/1.2836467.

Full text

Abstract:

Design is done in many fields. Although the design practices in different fields appear to be distinct from each other, all fields use a common thought process and design principles. Consequently, the true differences between these fields are minor, often consisting of the definitions of words, the specific data, and knowledge. In comparison, larger differences can exist within a given field between simple systems and large systems due to the size and the time dependent nature of functional requirements. The axiomatic approach to design provides a general theoretical framework for all these design fields, including mechanical design. The key concepts of axiomatic design are: the existence of domains, the characteristic vectors within the domains that can be decomposed into hierarchies through zigzagging between the domains, and the design axioms (i.e., the Independence Axiom and the Information Axiom). Based on the two design axioms, corollaries and theorems can be stated or derived for simple systems, large systems, and organizations. These theorems and corollaries can be used as design rules or guidelines for designers. The basic concepts are illustrated using simple mechanical design examples. When design is viewed axiomatically, not only product design but all other designs, including design of process, systems, software, organizations, and materials, are amenable to systematic treatment.

APA, Harvard, Vancouver, ISO, and other styles

30

Suh, N. P. "Axiomatic Design of Mechanical Systems." Journal of Vibration and Acoustics 117, B (June 1, 1995): 2–10. http://dx.doi.org/10.1115/1.2838673.

Full text

Abstract:

Design is done in many fields. Although the design practices in different fields appear to be distinct from each other, all fields use a common thought process and design principles. Consequently, the true differences between these fields are minor, often consisting of the definitions of words, the specific data, and knowledge. In comparison, larger differences can exist within a given field between simple systems and large systems due to the size and the time dependent nature of functional requirements. The axiomatic approach to design provides a general theoretical framework for all these design fields, including mechanical design. The key concepts of axiomatic design are: the existence of domains, the characteristic vectors within the domains that can be decomposed into hierarchies through zigzagging between the domains, and the design axioms (i.e., the Independence Axiom and the Information Axiom). Based on the two design axioms, corollaries and theorems can be stated or derived for simple systems, large systems, and organizations. These theorems and corollaries can be used as design rules or guidelines for designers. The basic concepts are illustrated using simple mechanical design examples. When design is viewed axiomatically, not only product design but all other designs, including design of process, systems, software, organizations, and materials, are amenable to systematic treatment.

APA, Harvard, Vancouver, ISO, and other styles

31

Whitney, Daniel E. "Why mechanical design cannot be like VLSI design." Research in Engineering Design 8, no. 3 (September 1996): 125–38. http://dx.doi.org/10.1007/bf01608348.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

Kannapan, Srikanth M., and Kurt M. Marshek. "Design synthetic reasoning: A methodology for mechanical design." Research in Engineering Design 2, no. 4 (December 1991): 221–38. http://dx.doi.org/10.1007/bf01579219.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

MORIMOTO, Kenta, and Yuichi ITOH. "Development of education program for mechanical design support by CAE/CFD." International Conference on Business & Technology Transfer 2012.6 (2012): 120–25. http://dx.doi.org/10.1299/jsmeicbtt.2012.6.0_120.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

S. Gaikwad, Kanchan, Shekhar G. Shinde, and Ranjitsinha R Gidde. "A Review on Study of Design Optimization Technique of Mechanical Component." International Journal of Science and Research (IJSR) 12, no. 11 (November 5, 2023): 1829–31. http://dx.doi.org/10.21275/es231124100624.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Sainath, K. "Design of Mechanical Hydraulic Jack." IOSR Journal of Engineering 4, no. 7 (July 2014): 15–28. http://dx.doi.org/10.9790/3021-04711528.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

TAKANO, Masaharu. "Design of robot mechanical system." Journal of the Robotics Society of Japan 4, no. 4 (1986): 394–400. http://dx.doi.org/10.7210/jrsj.4.394.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Ospina-Bayona, H. E., C. C. Sánchez-Torres, R. A. García-León, H. A. Ballesteros-Ruiz, and B. C. Pérez-Lozano. "Design of a mechanical seeder." Journal of Physics: Conference Series 1388 (November 2019): 012004. http://dx.doi.org/10.1088/1742-6596/1388/1/012004.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Uras, H. Mehmet, and Adnan Akay. "Mechanical Engineering Capstone Design Course." International Journal of Mechanical Engineering Education 21, no. 4 (October 1993): 347–54. http://dx.doi.org/10.1177/030641909302100405.

Full text

Abstract:

A capstone mechanical engineering design course is described. It is suggested that design education should start early in the curriculum, by providing open-ended problems and by emphasizing teamwork. Discovery-based leaching should be integrated into the curriculum to enhance creativity. In the capstone design course, a project is utilized as a vehicle for leaching design methods and related topics. The philosophy of reduced iteration and testing is espoused.

APA, Harvard, Vancouver, ISO, and other styles

39

Hope, A. K. "Mechanical CAE system design databases." Computer-Aided Engineering Journal 3, no. 6 (1986): 235. http://dx.doi.org/10.1049/cae.1986.0058.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Qian, Lianfen. "Probability Applications in Mechanical Design." Technometrics 43, no. 4 (November 2001): 490. http://dx.doi.org/10.1198/tech.2001.s48.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Castro, Carlos E., Hai-Jun Su, Alexander E. Marras, Lifeng Zhou, and Joshua Johnson. "Mechanical design of DNA nanostructures." Nanoscale 7, no. 14 (2015): 5913–21. http://dx.doi.org/10.1039/c4nr07153k.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Wieman, H. H., E. Anderssen, L. Greiner, H. S. Matis, H. G. Ritter, X. Sun, and M. Szelezniak. "STAR PIXEL detector mechanical design." Journal of Instrumentation 4, no. 05 (May 20, 2009): P05015. http://dx.doi.org/10.1088/1748-0221/4/05/p05015.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Barber, J. P., and C. L. McDonald. "The mechanical design of armatures." IEEE Transactions on Magnetics 25, no. 1 (1989): 79–82. http://dx.doi.org/10.1109/20.22509.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

OKAMOTO, HIDEHO. "Mechanical Design of Biomimetic Composites." Sen'i Gakkaishi 44, no. 3 (1988): P81—P88. http://dx.doi.org/10.2115/fiber.44.3_p81.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Kirschman, C. F., and G. M. Fadel. "Classifying Functions for Mechanical Design." Journal of Mechanical Design 120, no. 3 (September 1, 1998): 475–82. http://dx.doi.org/10.1115/1.2829176.

Full text

Abstract:

As design methods are studied, the usefulness of function-based methodologies becomes clear. However, for these methodologies to be fully utilized, there must be some standardization of the functions used to provide a common language. This paper presents a taxonomy of elemental mechanical functions which can be used with many decomposition techniques. The taxonomy can be used as a pedagogical tool or as a basis for the derivation of a complete taxonomy. Also discussed are generic forms and how they interact with the taxonomy.

APA, Harvard, Vancouver, ISO, and other styles

46

Coros, Stelian, Bernhard Thomaszewski, Gioacchino Noris, Shinjiro Sueda, Moira Forberg, Robert W. Sumner, Wojciech Matusik, and Bernd Bickel. "Computational design of mechanical characters." ACM Transactions on Graphics 32, no. 4 (July 21, 2013): 1–12. http://dx.doi.org/10.1145/2461912.2461953.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Arikawa, Keisuke, and Shigeo Hirose. "Mechanical design of walking machines." Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences 365, no. 1850 (November 17, 2006): 171–83. http://dx.doi.org/10.1098/rsta.2006.1888.

Full text

Abstract:

The performance of existing actuators, such as electric motors, is very limited, be it power–weight ratio or energy efficiency. In this paper, we discuss the method to design a practical walking machine under this severe constraint with focus on two concepts, the gravitationally decoupled actuation (GDA) and the coupled drive. The GDA decouples the driving system against the gravitational field to suppress generation of negative power and improve energy efficiency. On the other hand, the coupled drive couples the driving system to distribute the output power equally among actuators and maximize the utilization of installed actuator power. First, we depict the GDA and coupled drive in detail. Then, we present actual machines, TITAN-III and VIII, quadruped walking machines designed on the basis of the GDA, and NINJA-I and II, quadruped wall walking machines designed on the basis of the coupled drive. Finally, we discuss walking machines that travel on three-dimensional terrain (3D terrain), which includes the ground, walls and ceiling. Then, we demonstrate with computer simulation that we can selectively leverage GDA and coupled drive by walking posture control.

APA, Harvard, Vancouver, ISO, and other styles

48

Mischke, C. R. "Some Stochastic Mechanical Design Applications." Journal of Mechanical Design 114, no. 1 (March 1, 1992): 42–47. http://dx.doi.org/10.1115/1.2916923.

Full text

Abstract:

This is the third paper in a series relating to stochastic methods in mechanical design. The two previous ones were entitled, “Some Property Data and Corresponding Weibull Parameters for Stochastic Mechanical Design,” and “Fitting Weibull Strength Data and Applying it to Stochastic Mechanical Design.” They presented the groundwork for addressing stochastic problems in machinery design to a reliability goal when strength data are sparse. The purpose of this paper is to utilize procedures for estimating reliability of machine elements when yielding, fracture, or distortion are the limiting or active constraints.

APA, Harvard, Vancouver, ISO, and other styles

49

Ohtomi, Koichi, and Kenichi Kameyama. "Artificial Reality and Mechanical Design." Journal of the Society of Mechanical Engineers 95, no. 883 (1992): 489–92. http://dx.doi.org/10.1299/jsmemag.95.883_489.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Shigley, J. E., L. D. Mitchell, and H. Saunders. "Mechanical Engineering Design (4th Ed.)." Journal of Mechanisms, Transmissions, and Automation in Design 107, no. 2 (June 1, 1985): 145. http://dx.doi.org/10.1115/1.3258702.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!