Log in

Relevant bibliographies by topics / Mechanical Design

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Mechanical Design'

Author: Grafiati

Published: 4 June 2021

Last updated: 25 May 2024

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Mechanical Design.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Mechanical Design"

1

Kumar, Prof M. Suresh, T. A. Ajay Chakravarthi, and N. Arun Kumar S. Hariprasaath. "Design and Fabrication of Mechanical Maize Decobber." International Journal of Trend in Scientific Research and Development Volume-2, Issue-3 (April 30, 2018): 276–78. http://dx.doi.org/10.31142/ijtsrd10868.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

宋, 仁杰. "Mechanical Design Methods and Innovative Thinking in Ancient Chinese Classics." Design 03, no. 03 (2018): 59–64. http://dx.doi.org/10.12677/design.2018.33010.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Arafa, H. A. "Mechanical Design Pitfalls." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 220, no. 6 (June 1, 2006): 887–99. http://dx.doi.org/10.1243/09544062jmes185.

Full text

Abstract:

Design pitfalls are defined as those obscure mistakes that can be attributed to negligence or ignorance of particular details and characteristics of the design and, in some cases, the manufacturing processes. This paper presents ten actual cases where a designer could be tempted or misled into design pitfalls that would create weird encounters during assembling or operating mechanical equipment. The pitfalls could have immediate, embarrassing consequences, or eventually lead to hazardous situations and failure in unexpected modes. The consequences of these pitfalls and their remedies are also discussed. The design examples lie in various areas such as gearing and planetary systems, bearings, and fluid power. They are classified under generic headings, some of which are seen to qualify, and are therefore suggested, as design principles, to be added to the repertory. It is deemed that this paper will stimulate further investigations leading to the identification of design pitfalls in these and other areas.

APA, Harvard, Vancouver, ISO, and other styles

4

Reddy, T. Y. "Mechanical engineering design." Journal of Mechanical Working Technology 11, no. 3 (July 1985): 378–79. http://dx.doi.org/10.1016/0378-3804(85)90010-5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Edwards, K. L. "Mechanical engineering design." Materials & Design 15, no. 2 (January 1994): 116–17. http://dx.doi.org/10.1016/0261-3069(94)90047-7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

He, Fa Wei. "Research on Accuracy Design of Mechanical Design." Applied Mechanics and Materials 184-185 (June 2012): 412–16. http://dx.doi.org/10.4028/www.scientific.net/amm.184-185.412.

Full text

Abstract:

Abstract. Mechanical design contains three part: firstly, organization design; according to working requirement of machine, properly choose transmission form and executive body, so as to realize mechanical movement, and the result is showed by mechanical movement diagram. Secondly, structural design; according to machine’s load level, Meeting the request of mechanical strength and service life consider Structure technology and assembly processes, and determine the machine’s parts and assembly drawings. And thirdly, accuracy design; according to the function requirement of machine, select the appropriate dimensional accuracy, shape accuracy and surface roughness, in order meet the requirement, raise product quality, and reduce costs at the same time. There has already been plenty of paper dealing with organization design and structural design, but very few dealing with accuracy design.

APA, Harvard, Vancouver, ISO, and other styles

7

Yoder, Paul R., and R. N. Ckakraborty. "Opto-Mechanical Systems Design." Journal of Optics 22, no. 1 (March 1993): 23–24. http://dx.doi.org/10.1007/bf03549710.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Shadwick, R. E. "Mechanical design in arteries." Journal of Experimental Biology 202, no. 23 (December 1, 1999): 3305–13. http://dx.doi.org/10.1242/jeb.202.23.3305.

Full text

Abstract:

The most important mechanical property of the artery wall is its non-linear elasticity. Over the last century, this has been well-documented in vessels in many animals, from humans to lobsters. Arteries must be distensible to provide capacitance and pulse-smoothing in the circulation, but they must also be stable to inflation over a range of pressure. These mechanical requirements are met by strain-dependent increases in the elastic modulus of the vascular wall, manifest by a J-shaped stress-strain curve, as typically exhibited by other soft biological tissues. All vertebrates and invertebrates with closed circulatory systems have arteries with this non-linear behaviour, but specific tissue properties vary to give correct function for the physiological pressure range of each species. In all cases, the non-linear elasticity is a product of the parallel arrangement of rubbery and stiff connective tissue elements in the artery wall, and differences in composition and tissue architecture can account for the observed variations in mechanical properties. This phenomenon is most pronounced in large whales, in which very high compliance in the aortic arch and exceptionally low compliance in the descending aorta occur, and is correlated with specific modifications in the arterial structure.

APA, Harvard, Vancouver, ISO, and other styles

9

Ashby, Michael F. "Materials in Mechanical Design." MRS Bulletin 18, no. 7 (July 1993): 43–53. http://dx.doi.org/10.1557/s0883769400037520.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

AOYAMA, Hajime, Kazutaka YOKOTA, Kazuyoshi ISHIKAWA, Saori ISHIMURA, Junya SEKI, Yoshinori ADACHI, Yuichi SATSUMI, Asami TAKAHASHI, Yoji ISHIMARU, and Nobusige IMAI. "S201021 Mechanical Design Education." Proceedings of Mechanical Engineering Congress, Japan 2011 (2011): _S201021–1—_S201021–5. http://dx.doi.org/10.1299/jsmemecj.2011._s201021-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Mechanical Design"

1

Shooter, Steven B. "Information modeling in mechanical design : with application to cam mechanical design /." Diss., This resource online, 1995. http://scholar.lib.vt.edu/theses/available/etd-06062008-155414/.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Jackson, A. "The mechanical design of nacre." Thesis, University of Reading, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.373839.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Chai, Lauren (Lauren Amy). "Design of mechanical arterial simulator." Thesis, Massachusetts Institute of Technology, 2012. http://hdl.handle.net/1721.1/74431.

Full text

Abstract:

Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2012.
Cataloged from PDF version of thesis.
Includes bibliographical references (p. 73-74).
A force controlled ultrasound probe is being explored as a new method of measuring blood pressure. An arterial simulator was designed and built for experiments. For this simulator, the vessels and bulk material were designed to meet the specifications of literature values of the physical dimensions and elastic modulus of carotid and brachial arteries and bulk surrounding the arteries. This was done through the use of a PVA cyrogel and Thermo rubber- mineral oil solution as the materials for the vessel and bulk material respectively. The concentration of the ingredients and the number of freeze thaw cycle of the cyrogel control the elasticity of the two materials. Custom molds were fabricated to the desired physical dimensions. Upon integration of the vessel and bulk, the vessel was connected to a network of hoses and a pump. The pump is a diaphragm pump whose volume/stroke and speed can be independently controlled to simulate the pulsing of a real human heart. Measurements were taken of the force applied to the probe for static pressures to demonstrate the force varying linearly with pressure. Further measurements were taken with fluid flowing through the vessel at various probe heights to demonstrate how force and thus pressure vary with height and to demonstrate that the probe can detect the waveforms that result from the vessels pulsing with each stroke of the diaphragm pump.
by Lauren Chai.
S.B.

APA, Harvard, Vancouver, ISO, and other styles

4

Hopkins, Brandon J. (Brandon James). "Mechanical design of flow batteries." Thesis, Massachusetts Institute of Technology, 2013. http://hdl.handle.net/1721.1/87922.

Full text

Abstract:

Thesis: S.M., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2013.
Cataloged from PDF version of thesis.
Includes bibliographical references (pages 72-73).
The purpose of this research is to investigate the design of low-cost, high-efficiency flow batteries. Researchers are searching for next-generation battery materials, and this thesis presents a systems analysis encompassing static and moving electrode architectures that identifies which architecture is most appropriate for which materials and how to modify those materials to decrease cost and increase efficiency. The cost model and mechanical designs presented will help researchers (i) identify how to modify existing materials, (ii) find new desirable materials, and (iii) use those materials in novel flow battery structures to create next-generation batteries.
by Brandon J. Hopkins.
S.M.

APA, Harvard, Vancouver, ISO, and other styles

5

DESHMUKH, DINAR VIVEK. "Design Optimization of Mechanical Components." University of Cincinnati / OhioLINK, 2002. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1028738547.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Shahid, Hamid. "Integration of System-Level Design and Mechanical Design Models in the Development of Mechanical Systems." Thesis, KTH, Skolan för informations- och kommunikationsteknik (ICT), 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-53061.

Full text

Abstract:

Modern-day systems are becoming complex due to the growing needs of the market. These systems contain various subsystems developed by different groups of engineers. Particularly, all mechatronics systems involve different mechanical, electrical and software parts developed by multidisciplinary teams of engineers from different backgrounds. Designing of these complex systems requires effective management, of the engineering and the system integration information, across all the involved disciplines. Model Based System Engineering (MBSE) is one of the effective ways for managing the engineering design process. In MBSE, design information is formally stored in the form of models, which allows better control of requirements throughout the development life cycle and provides ability to perform better analysis. Engineers usually are expert in their own discipline, where they utilize modeling languages and tools with a domain-specific focus. This creation of models with the domain-specific focus does not provide a view of the system as a whole. Hence, in order to have a complete system view, it is required to provide information transfer means across different domains, through models developed in different modeling languages and tools supporting them. Model integration is one of the ways to integrate and transfer model information across different domains. An approach for model integration is proposed, with the focus on the integration between system level models created in SysML and mechanical CAD (MCAD) models. The approach utilizes the feature of SysML to create domain specific profiles and presents a SysML profile for MCAD domain. This profile aids in establishing a mapping between SysML and MCAD concepts, as it allows the extension of SysML constructs to represent MCAD concepts in SysML. Model transformations are used to transform a model created through SysML profile for MCAD in to the corresponding model in a MCAD tool, and vice versa. A robot model is presented to exemplify the working of the approach and to explain the integration of mechanical design model with a system-level design model and vice versa. The approach presented in this thesis depicts a scalable concept, which can be extended towards the integration of other domains with MCAD, by building new relations and profiles in SysML. This approach aids in co-evolution of a system model during domain-specific development activities, hence providing better means to understand the system as a whole.

APA, Harvard, Vancouver, ISO, and other styles

7

Stephenson, John Antony. "Design for reliability in mechanical systems." Thesis, University of Cambridge, 1996. https://www.repository.cam.ac.uk/handle/1810/251589.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Liu, Anmin. "The mechanical design of legged robots." Thesis, University of Salford, 2009. http://usir.salford.ac.uk/26779/.

Full text

Abstract:

This thesis has focused on the mechanical design of statically stable multi-legged CLimbing And WAlking Robots(CLAWAR) machines and, since crab-like machines represent an important sub-class, in this thesis they were chosen as the subject of the study. Through the review of leg mechanisms, it is clear that for many years, navigation, gait generation and control, rather than mechanical design, have been the main concerns of many CLAWAR researchers. During the development of prototypes, it has often been assumed that the mechanical design principles are known and the researchers' jobs are simply to apply them. In practice, this is far from the truth, as the performance of existing prototypes testifies. The most common design approach is to copy the geometry of insects and mammals with little or no scientific justification. Although there has been some very good work on leg mechanism design, the relationships between leg design and overall machine layout have been neglected. In this thesis, the design is considered as a whole with no artificial decoupling of leg geometry and overall machine geometry. Furthermore, the design process is treated as a series of coupled optimisation problems. The main achievements and conclusions that have resulted from the research described in this thesis can be summarised as follows: • Based on the review on leg mechanisms, a classification on legged machine layout was proposed; • A clear understanding of the effect of leg configurations and geometric design parameters on the performance of crab-like CLAWAR machines has been achieved. • A novel design methodology that breaks the problem into: a) kinematic design; and b) performance optimisation, was presented. The design methodology is based on satisfying kinematic requirements (constraints) and optimisation of kinetic performance measure, such as minimising the joint torques. • Although the design methodology has only been applied in the 2D case, it has been shown that it could be applied in the 3D case and the necessary analysis methods have been established. • Methods for using foot force distribution as well as design to optimise performance were developed. • Novel reformulations of the Moor-Penrose pseudo-inverse for optimising the foot force distribution in the 3D case were developed, which could be applied in real time control as well as in design.

APA, Harvard, Vancouver, ISO, and other styles

9

West, Kent. "Mechanical design using the Genetic Algorithm." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2001. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp04/MQ60513.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Charlton, C. T. "The retrieval of mechanical design information." Thesis, University of Cambridge, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.597499.

Full text

Abstract:

The retrieval methods use the explicit elements and associations which appear in a structured design representation, without requiring an understanding of the designs or their application domains. They depend instead on simple similarity measures concerning the basic representation elements, and integrate this basic evidence within the structured representations. Structure is handled dynamically, so that fragments are defined by the best-matching level for each query. The propagation of evidence through the structure of fragments allows different types and levels of representation to be related. These principles are developed are evaluated within an IR framework consisting of textual information, not least since text can and does express design information, especially concerning experience and the design process. Moreover, IR provides standard test collections to quantify retrieval performance. Although usually based on fairly long passages of unstructured text, such a collection can be used to evaluate the suggested approach to retrieving structured mechanical design fragments, which is difficult to assess directly. Rather than transferring the structured representation to flat text, which would lose information, a structure is imposed on a textual test collection and an analogy drawn between structured design representations and structured text. The results show that formalised knowledge structures such as classifications are not necessary for retrieving design information. Instead, informal knowledge and 'obvious' connections between representation elements can lead to improved retrieval performance, according to the standard IR measures of precision and recall. However, connections are not always applicable in every context, and retrieval performance suffers if any ambiguity in the representation elements or their similarity measures is not resolved before making connections. The representation structure forms a convenient context for this process of resolving ambiguity. There are several applications of this work. One is in Design Reuse, initially via a retrieval system which suggests standard components to replace specially-designed parts. Allowing for imprecision means that it can be used relatively early in the design process.

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Mechanical Design"

1

Risitano, Antonino. Mechanical design. Boca Raton: CRC Press, 2011.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Mechanical design. 2nd ed. Oxford: Burlington, MA, 2004.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

De Bona, Francesco, and Eniko T. Enikov, eds. Microsystems Mechanical Design. Vienna: Springer Vienna, 2006. http://dx.doi.org/10.1007/978-3-211-48549-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

R, Mischke Charles, ed. Mechanical engineering design. 5th ed. New York: McGraw-Hill, 1989.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

R, Mischke Charles, and Budynas Richard G, eds. Mechanical engineering design. 7th ed. New York, NY: McGraw-Hill, 2004.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Elevator mechanical design. 3rd ed. Mobile, AL: Elevator World, 1999.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Shigley, Joseph Edward. Mechanical engineering design. 6th ed. Boston, Mass: McGraw Hill, 2001.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Shigley, Joseph Edward. Mechanical engineering design. 7th ed. New York: McGraw-Hill, 2004.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Shigley, Joseph Edward. Mechanical engineering design. 7th ed. New York: McGraw-Hill, 2003.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Janovský, Lubomír. Elevator mechanical design. 2nd ed. New York: Ellis Horwood, 1993.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Mechanical Design"

1

Kurzke, Joachim, and Ian Halliwell. "Mechanical Design." In Propulsion and Power, 411–36. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-75979-1_11.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Richards, Keith L. "Mechanical Fasteners." In Design Engineer's Sourcebook, 759–94. Boca Raton : Taylor & Francis, CRC Press, 2018.: CRC Press, 2017. http://dx.doi.org/10.1201/9781315367514-31.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Richards, Keith L. "Mechanical Vibrations." In Design Engineer's Sourcebook, 143–201. Boca Raton : Taylor & Francis, CRC Press, 2018.: CRC Press, 2017. http://dx.doi.org/10.1201/9781315367514-9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Turino, Jon L. "Mechanical Guidelines." In Design to Test, 251–61. Dordrecht: Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-011-6044-5_11.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Darbyshire, Alan, and Charles Gibson. "Engineering design." In Mechanical Engineering, 361–404. 4th ed. London: Routledge, 2022. http://dx.doi.org/10.1201/9781003256571-6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Bowser, Timothy J. "Mechanical Separation Design." In Handbook of Food Process Design, 811–33. Oxford, UK: Wiley-Blackwell, 2012. http://dx.doi.org/10.1002/9781444398274.ch29.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Stone, Richard. "Mechanical Design Considerations." In Introduction to Internal Combustion Engines, 397–424. London: Macmillan Education UK, 1992. http://dx.doi.org/10.1007/978-1-349-22147-9_11.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Stone, Richard. "Mechanical design considerations." In Introduction to Internal Combustion Engines, 345–63. London: Macmillan Education UK, 2012. http://dx.doi.org/10.1007/978-1-137-02829-7_12.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Stone, Richard. "Mechanical design considerations." In Introduction to Internal Combustion Engines, 445–70. London: Macmillan Education UK, 1999. http://dx.doi.org/10.1007/978-1-349-14916-2_11.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Stone, Richard. "Mechanical Design Considerations." In Solutions Manual for Introduction to Internal Combustion Engines, 165–69. London: Macmillan Education UK, 1999. http://dx.doi.org/10.1007/978-1-349-15079-3_10.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Mechanical Design"

1

Macanhan, Vanessa B. P., Márcio V. de Arruda, Thiago V. Martins, Tania P. Dominici, Bruno V. Castilho, Clemens D. Gneiding, and Rodrigo P. Campos. "ECHARPE mechanical design." In SPIE Astronomical Telescopes + Instrumentation, edited by Ian S. McLean, Suzanne K. Ramsay, and Hideki Takami. SPIE, 2012. http://dx.doi.org/10.1117/12.924700.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Dominguez, Ruben, Vanessa B. P. Macanhan, Bruno V. Castilho, Marcio V. de Arruda, Clemens D. Gneiding, Andreas Klossek, Ney Diniz, et al. "STELES mechanical design." In SPIE Astronomical Telescopes + Instrumentation, edited by Ian S. McLean, Suzanne K. Ramsay, and Hideki Takami. SPIE, 2012. http://dx.doi.org/10.1117/12.926903.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Beets, Timothy A., Joseph H. Beno, Moo-Young Chun, Sungho Lee, Chan Park, Marc Rafal, Michael S. Worthington, and In-Soo Yuk. "GMTNIRS mechanical design." In SPIE Astronomical Telescopes + Instrumentation, edited by Ian S. McLean, Suzanne K. Ramsay, and Hideki Takami. SPIE, 2012. http://dx.doi.org/10.1117/12.927022.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Sun, Kun, and Boi Faltings. "Supporting Creative Mechanical Design." In ASME 1994 International Computers in Engineering Conference and Exhibition and the ASME 1994 8th Annual Database Symposium collocated with the ASME 1994 Design Technical Conferences. American Society of Mechanical Engineers, 1994. http://dx.doi.org/10.1115/cie1994-0418.

Full text

Abstract:

Abstract Knowledge-based CAD systems limit designers’ creativity by constraining them to work with the prototypes provided by the systems’ knowledge bases. We investigate knowledge-based CAD systems capable of supporting creative designs in the example domain of elementary mechanisms. We present a technique based on qualitative explanations which allows a designer to extend the knowledge base by demonstrating a structure which implements a function in a creative way. Structure is defined as the geometry of the parts, and function using a general logical language based on qualitative physics. We argue that the technique can accommodate any creative design in the example domain, and we demonstrate the technique using an example of a creative design. The use of qualitative physics as a tool for extensible knowledge-based systems points out a new and promising application area for qualitative physics.

APA, Harvard, Vancouver, ISO, and other styles

5

Gardam, Allan, and Kenneth D. Ball. "Mechanical stability of optical structures." In Optical Instrumentation & Systems Design, edited by Joseph J. M. Braat. SPIE, 1996. http://dx.doi.org/10.1117/12.246712.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Patil, Saurabh S., Vanessa M. Rodrigues, Ajeetkumar Patil, and Santhosh Chidangil. "Opto-mechanical door locking system." In SPIE Optical Systems Design, edited by Laurent Mazuray, Rolf Wartmann, and Andrew P. Wood. SPIE, 2015. http://dx.doi.org/10.1117/12.2190830.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Kawinkij, Adithep, Apirat Prasit, Christophe Buisset, Griangsak Thummasorn, Teerawat Kuha, Esther Lhospice, Hugh Jones, et al. "EXOhSPEC collimator mechanical design." In Astronomical Optics: Design, Manufacture, and Test of Space and Ground Systems II, edited by Pascal Hallibert, Tony B. Hull, and Dae Wook Kim. SPIE, 2019. http://dx.doi.org/10.1117/12.2529107.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Fuentes, F. J., Vicente Sanchez, Sonia Barrera, Santiago Correa, Jaime Perez, Pablo Redondo, Rene Restrepo, et al. "EMIR mechanical design status." In SPIE Astronomical Telescopes + Instrumentation. SPIE, 2004. http://dx.doi.org/10.1117/12.551122.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Salvignol, Jean-Christophe, Karl Honnen, and Reiner Barho. "JWST NIRSpec mechanical design." In SPIE Astronomical Telescopes + Instrumentation, edited by Eli Atad-Ettedgui and Dietrich Lemke. SPIE, 2008. http://dx.doi.org/10.1117/12.789858.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Takeshi Takamori and Tadaaki Mimura. "Session 3 Mechanical design." In 2008 IEEE 9th VLSI Packaging Workshop of Japan. IEEE, 2008. http://dx.doi.org/10.1109/vpwj.2008.4762200.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Mechanical Design"

1

Shook, Richard, and /Marquette U. /SLAC. Mechanical Design. Office of Scientific and Technical Information (OSTI), August 2010. http://dx.doi.org/10.2172/992931.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Alvis, Robert L. Mechanical considerations and design skills. Office of Scientific and Technical Information (OSTI), March 2008. http://dx.doi.org/10.2172/932875.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Stroman, Richard O. Mechanical Design Report DARPA BOSS Program. Fort Belvoir, VA: Defense Technical Information Center, March 2008. http://dx.doi.org/10.21236/ada480548.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Varma, Venugopal Koikal, David Eugene Holcomb, Fred J. Peretz, Eric Craig Bradley, Dan Ilas, A. L. Qualls, and Nathaniel M. Zaharia. AHTR Mechanical, Structural, And Neutronic Preconceptual Design. Office of Scientific and Technical Information (OSTI), October 2012. http://dx.doi.org/10.2172/1081980.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Varma, V. K., D. E. Holcomb, F. J. Peretz, E. C. Bradley, D. Ilas, A. L. Qualls, and N. M. Zaharia. AHTR Mechanical, Structural, and Neutronic Preconceptual Design. Office of Scientific and Technical Information (OSTI), September 2012. http://dx.doi.org/10.2172/1054145.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Narahari, Y., R. SudarsanK W. Lyons, M. R. Duffey, and R. D. Sriram. Design for tolerance of electro-mechanical assemblies:. Gaithersburg, MD: National Institute of Standards and Technology, 1998. http://dx.doi.org/10.6028/nist.ir.6223.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

House, P. A. HYLIFE-II reactor chamber mechanical design: Update. Office of Scientific and Technical Information (OSTI), October 1992. http://dx.doi.org/10.2172/10169977.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

G. Walton, P. J. Polk, and S. -T. Hsue. Mechanical Design of Hybrid Densitometer for Laboratory Applications. Office of Scientific and Technical Information (OSTI), January 1999. http://dx.doi.org/10.2172/3342.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Rosheim, Mark E. Mechanical Design of an Omni-Directional Sensor Mount. Fort Belvoir, VA: Defense Technical Information Center, October 2002. http://dx.doi.org/10.21236/ada408440.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Parise, Mattia. Single Spoke Resonators: String Assembly and Mechanical Design. Office of Scientific and Technical Information (OSTI), January 2020. http://dx.doi.org/10.2172/1596027.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!