Relevant bibliographies by topics / Measurement resolution

Academic literature on the topic 'Measurement resolution'

Author: Grafiati
Published: 30 May 2022
Last updated: 31 May 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Measurement resolution.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Measurement resolution"

1

Vaid, Y. P., and S. Sivathayalan. "Errors in estimates of void ratio of laboratory sand specimens." Canadian Geotechnical Journal 33, no. 6 (December 1, 1996): 1017–20. http://dx.doi.org/10.1139/t96-128.

Full text
Abstract:
Serious errors in assigning void ratio to a laboratory sand specimen can occur due to poor resolutions in the measurement of its physical dimensions. The extent of these errors for given resolutions in the measurements of specimen diameter and (or) height is discussed, and their implications in estimates of undrained residual strength are pointed out in the steady-state analysis of sand structures that could be susceptible to flow slides. Alternatives for a more confident and consistent assignment of void ratio are proposed that circumvent the generally low resolutions in measurements of specimen diameter and height and utilize only the high-resolution mass measurements. Key words: measurement resolution, void ratio error, sand, liquefaction, residual strength, flow slide.
APA, Harvard, Vancouver, ISO, and other styles
2

Bentley, J., N. D. Evans, and E. A. Kenik. "Measurement of Scanning Electron Microscope resolution." Proceedings, annual meeting, Electron Microscopy Society of America 52 (1994): 1044–45. http://dx.doi.org/10.1017/s0424820100172954.

Full text
Abstract:
The resolution performance of a scanning electron microscope (SEM) is a primary specification of the instrument. For a high-resolution SEM (HRSEM) equipped with a field emission gun (FEG), image resolutions of less than 2 nm are commonly claimed. Generally, both manufacturers and customers identify image resolution as the single most important performance criterion. It is traditionally determined with specimens such as gold islands on bulk carbon supports, where the minimum apparent separation of two islands is claimed as the resolution. This procedure is highly subjective since the spacings are not known independently. Dodson and Joy have pointed out the paradox implicit in this approach-that “the resolution of a given instrument can be verified only after a better instrument is available to characterize the structure spacing.” By analogy to the now standard approach for high-resolution transmission electron microscopes (TEMs), Dodson and Joy investigated the use of Fourier Transforms (FT) of high-resolution SEM images for measuring resolution.
APA, Harvard, Vancouver, ISO, and other styles
3

Schamp, C. T. "High-Resolution Metrology in the TEM." Microscopy Today 20, no. 3 (May 2012): 46–49. http://dx.doi.org/10.1017/s1551929512000363.

Full text
Abstract:
The transmission electron microscope (TEM) is well known as the technique of choice for visualization and measurement of features at near-atomic length scales, particularly for semiconductor devices. For example, a critical measurement of interest may be the thickness of the gate oxide in a transistor. The accuracy of these measurements is based on calibrated distances at each magnification. The term accuracy conveys the extent to which the measurement minimizes the difference between the measured value and the true value. The associated term precision is the closeness of agreement in a series of measurements locating the end-points of a measurement line. This article describes a method that increases the accuracy of metrology measurements applied to a high-resolution TEM image.
APA, Harvard, Vancouver, ISO, and other styles
4

Hershgold, M. E., and M. J. Luetkemeier. "HIGH RESOLUTION HEMATOCRIT MEASUREMENT." Medicine & Science in Sports & Exercise 24, Supplement (May 1992): S153. http://dx.doi.org/10.1249/00005768-199205001-00915.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Wilhelm, Paul, Michael Eggert, Julia Hornig, and Stefan Oertel. "High Spatial and Temporal Resolution Bistatic Wind Lidar." Applied Sciences 11, no. 16 (August 19, 2021): 7602. http://dx.doi.org/10.3390/app11167602.

Full text
Abstract:
The high-resolution bistatic lidar developed at the Physikalisch-Technische Bundesanstalt (PTB) aims to overcome the limitations of conventional monostatic lidar technology, which is widely used for wind velocity measurements in wind energy and meteorology applications. Due to the large measurement volume of a combined optical transmitter and receiver tilting in multiple directions, monostatic lidar generally has poor spatial and temporal resolution. It also exhibits large measurement uncertainty when operated in inhomogeneous flow; for instance, over complex terrain. In contrast, PTB’s bistatic lidar uses three dedicated receivers arranged around a central transmitter, resulting in an exceptionally small measurement volume. The coherent detection and modulation schemes used allow the detection of backscattered, Doppler shifted light down to the scale of single aerosols, realising the simultaneous measurement of all three wind velocity components. This paper outlines the design details and theory of operation of PTB’s bistatic lidar and provides an overview of selected comparative measurements. The results of these measurements show that the measurement uncertainty of PTB’s bistatic lidar is well within the measurement uncertainty of traditional cup anemometers while being fully independent of its site and traceable to the SI units. This allows its use as a transfer standard for the calibration of other remote sensing devices. Overall, PTB’s bistatic lidar shows great potential to improve the capability and accuracy of wind velocity measurements, such as for the investigation of highly dynamic flow processes upstream and in the wake of wind turbines.
APA, Harvard, Vancouver, ISO, and other styles
6

Luedemann, Hans-Christian. "Interferometric Volume Measurement in Microplates." SLAS TECHNOLOGY: Translating Life Sciences Innovation 22, no. 1 (September 25, 2016): 89–97. http://dx.doi.org/10.1177/2211068216669689.

Full text
Abstract:
Low-coherence interferometry is presented as a method for nondestructive, noncontact, and high-resolution measurement of liquid volumes and fill heights in microplates. A Meniscense (Bolton, MA) prototype system captures both fill height and meniscus shape and combines them into a volume measurement, allowing for the measurement of a wide range of liquids with different meniscus shapes. The system has a liquid fill height resolution of 0.7 µm, corresponding to a volume resolution of 0.02 µL in a typical 96-well plate, demonstrated in an ideal model system. Initial data on the gravimetric verification of volume measurements on aliquots of distilled water between 50 and 350 µL in a 96-well plate suggest an inaccuracy of volume measurement of <2%. The Meniscense system offers accuracy comparable to ratiometric photometry, the only commercially available high-resolution volume measurement system. Its fill height resolution is substantially better than that of ultrasonic ranging, the only other noncontact, nondestructive method for fill height measurement.
APA, Harvard, Vancouver, ISO, and other styles
7

Okamoto, Yasuhide, Sho Kanzaki, Ayako Kanno, Takeshi Nakaichi, Takashi Morimoto, Kouta Harada, Eri Kubota, and Kaoru Ogawa. "Temporal resolution measurement in presbyacusis." AUDIOLOGY JAPAN 57, no. 6 (2014): 694–702. http://dx.doi.org/10.4295/audiology.57.694.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Taraldsen, Gunnar. "Instrument resolution and measurement accuracy." Metrologia 43, no. 6 (November 13, 2006): 539–44. http://dx.doi.org/10.1088/0026-1394/43/6/009.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

van den Bos, A. "Resolution in model-based measurement." IEEE Transactions on Instrumentation and Measurement 51, no. 5 (October 2002): 1055–60. http://dx.doi.org/10.1109/tim.2002.806031.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

IIZUKA, Takaaki, and Yasushi NIITSU. "OS01F087 High Resolution Measurement of Luminous Marker Position by Image Processing." Abstracts of ATEM : International Conference on Advanced Technology in Experimental Mechanics : Asian Conference on Experimental Mechanics 2011.10 (2011): _OS01F087——_OS01F087—. http://dx.doi.org/10.1299/jsmeatem.2011.10._os01f087-.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Measurement resolution"

1

Eriksson, Johannes, Henrik Erlandsson, Jerker Ortman, and Viktor Sköldheden. "High resolution power measurement." Thesis, Uppsala universitet, Elektricitetslära, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-387314.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Trubilowicz, Joel William. "Using motes for high resolution hydrological measurement." Thesis, University of British Columbia, 2008. http://hdl.handle.net/2429/633.

Full text
Abstract:
Low cost, low power wireless sensors (motes) promise to revolutionize environmental data collection, but are they currently refined enough for widespread use by hydrologists? Their viability as a replacement for traditional data collection techniques was investigated in a 7 ha forested watershed in south-western British Columbia. The watershed included 41 instrument clusters measuring air and soil temperature, humidity, throughfall, soil moisture content, overland flow and groundwater head. The foundation of each cluster was a data box containing a MDA300 data acquisition board and a MICA2 processor board from Crossbow Technologies, Inc.™ that allowed for short range wireless data collection. The 41 motes each recorded data every 15 minutes from July, 2006, to April, 2007. In addition to reporting on the reliability of the motes and sensors during the 10 months deployment, the high spatial and temporal resolution data collected by this study gave the opportunity for many analyses of catchment processes. As soil moisture and throughfall are two influential processes in the exchange of water between the earth and the atmosphere, these were the focus of the data analysis. The first analysis was a resampling experiment on seven different events selected from the full data set. Comparing 100 different subsamples each of 5, 10 and 20 points for throughfall and soil moisture showed if increasing the sample size eventually produced diminishing returns in the ability to reproduce the true catchment mean. With significant differences in prediction ability for both soil moisture and throughfall at times of differing hydrologic activity, this analysis provides further support for the theories of changing moisture states of soil moisture and threshold values for throughfall. The second analysis described how the organization of soil moisture and throughfall changed during a range of weather conditions and timescales. Spatial representation of normalized values and Pearson correlation coefficients showed that there were distinct differences between wet and dry periods for soil moisture and between long and short analysis periods for throughfall.
APA, Harvard, Vancouver, ISO, and other styles
3

Mengesha, Wondwosen. "NaI(T1) electron energy resolution." Diss., Georgia Institute of Technology, 2002. http://hdl.handle.net/1853/15963.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Devanthéry, Arasa Núria. "High-resolution deformation measurement using "Persistent Scatterer Interferometry"." Doctoral thesis, Universitat Politècnica de Catalunya, 2014. http://hdl.handle.net/10803/283579.

Full text
Abstract:
Persistent Scatterer Interferometry (PSI) is a group of advanced differential interferometric SAR techniques that are used to measure and monitor terrain deformation. Different PSI techniques have been proposed in the last two decades. In this thesis, the two PSI chains implemented and used at the Geomatics division of CTTC are described: the local area PSI and the PSIG chains. The first part of the thesis is devoted to the local area PSI chain, used to analyse the deformations over small areas. The chain includes a linear deformation model to directly deal with interferometric wrapped phases. Moreover, it does not directly involve the estimation of the APS, thus simplifying the procedure and its computational cost. The chain has been tested using different types of SAR data. The availability of high resolution X-band SAR data has led to an improvement of the PSI results with respect to C-band data. The higher image resolution and phase quality implies an increase of the PS density, an improvement in the estimation precision of the residual topographic error and a higher sensibility to very small deformations, including the displacements caused by thermal dilation. An extension of the classical PSI linear deformation model has been proposed, to account for the thermal dilation effects. This allows obtaining a new PSI outcome, the thermal dilation parameter, which opens new interesting applications since it provides information on the physical properties of single objects, i.e. the coefficient of thermal expansion, and the static structures of the same objects. The second part of the thesis describes the PSIG chain, whose aim was to extend the interferometric processing to wider areas. The ability to cover wide areas is essential to obtain a unique and consistent deformation monitoring for the available SAR image full scenes, i.e. typically 30 by 50 km for TerraSAR-X, 40 by 40 km for CosmoSkyMed and 100 by 100 km for ASAR ENVISAT and ERS. This is particularly important for the forthcoming C-band Sentinel SAR data that will cover 250 by 250 km with a single image scene. The key steps of the PSIG procedure include a new selection of candidate PSs based on a phase similitude criteria and a 2+1D phase unwrapping algorithm. The procedure offers different tools to control the quality of the processing steps. It has been successfully tested over urban, rural and vegetated areas using X-band PSI data. The performance of the PSIG chain is illustrated and discussed in detail, analysing the procedure step by step.
Persistent Scatterer Interferometry (PSI) és un grup de tècniques avançades d'interferometria diferencial SAR que s'utilitzen per mesurar i monitoritzar deformacions del terreny. Durant les últimes dues dècades s’han proposat diverses tècniques PSI. En aquesta tesi es descriuen les dues cadenes PSI implementades i utilitzades en la divisió de Geomàtica del CTTC: la cadena PSI d’àrea local i la cadena PSIG. La primera part de la tesi està dedicada a la cadena PSI d’àrea local, que s'utilitza per analitzar deformacions en zones d’extensió limitada. La cadena inclou un model de deformació lineal per tractar directament amb les fases interferomètriques wrapped. En canvi, no estima directament la component atmosfèrica, cosa que simplifica el procediment i el seu cost computacional. La cadena s’ha provat sobre diferents tipus de dades SAR. La disponibilitat de dades SAR d’alta resolució en banda X ha donat lloc a una millora dels resultats del PSI respecte a les dades en banda C. La resolució més gran de la imatge i la qualitat de la fase impliquen un augment de la densitat de PS, una millora en la precisió de l'estimació de l'error topogràfic residual i una sensibilitat més alta a deformacions subtils, incloent-hi els desplaçaments causats per la dilatació tèrmica. Per tenir en compte els efectes de la dilatació tèrmica, s'ha proposat una extensió del model PSI clàssic que ens permet obtenir un nou producte PSI: el paràmetre de dilatació tèrmica. Aquest paràmetre obre noves aplicacions interessants: proporciona informació relacionada amb les propietats físiques dels objectes mesurats –com el coeficient d'expansió tèrmica– i amb la seva pròpia estructura estàtica. La segona part de la tesi descriu la cadena PSIG, l'objectiu de la qual és estendre el processament interferomètric a àrees més extenses. La capacitat de cobrir àrees grans és fonamental per obtenir un únic mapa global de deformacions que sigui consistent i cobreixi l’extensió sencera de les imatges SAR disponibles, de 30 km per 50 km per TerraSAR-X, de 40 km per 40 km per CosmoSkyMed i de 100 km per 100 km per ASAR-ENVISAT i ERS. Això és particularment important tenint en compte la propera disponibilitat de les dades del satèl•lit Sentinel, que opera en banda C i cobrirà 250 km per 250 km amb una sola imatge. Els passos clau del procediment PSIG són una nova selecció de PS candidats en base a un criteri de similitud de fase i un algoritme de 2+1D phase unwrapping. El procediment ofereix diferents eines per controlar la qualitat dels diferents passos del processament. La cadena PSIG s’ha utilitzat amb èxit en àrees urbanes, rurals i amb vegetació utilitzant dades PSI en banda X. El funcionament de la cadena PSIG s'il•lustra i es descriu en detall, analitzant el procediment pas a pas.
APA, Harvard, Vancouver, ISO, and other styles
5

Gan, Tong. "Study to improve measurement accuracy and resolution of atmospheric radars." 京都大学 (Kyoto University), 2015. http://hdl.handle.net/2433/202819.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Sloat, Ronald D. "High-Resolution, Non-Contact Angular Measurement System for PSA/RSA." DigitalCommons@CalPoly, 2011. https://digitalcommons.calpoly.edu/theses/485.

Full text
Abstract:
A non-contact angular measurement system for Pitch Static Attitude (PSA) and Roll Static Attitude (RSA) of hard disk drive sliders is designed and built. Real-time sampling at over 15 KHz is achieved with accuracy of +/- 0.05 degrees over a range of approximately 2-3 degrees. Measuring the PSA and RSA is critical for hard drive manufacturers to control and improve the quality and reliability of hard drives. Although the hard drive industry is able to measure the PSA and RSA at the subassembly level at this time, there is no system available that is able to measure PSA/RSA at the final assembly level. This project has successfully demonstrated a methodology that the PSA/RSA can be reliably measured in-situ using a laser and position sensitive detector (PSD) technology. A prototype of the measurement system has been built using simple and inexpensive equipment. This device will allow a continuous measurement between the parked position on the ramp and the loading position just off of the disk surface. The measured data can be used to verify manufacturing processes and reliability data.
APA, Harvard, Vancouver, ISO, and other styles
7

Mattila, S. (Sampo). "Measurement and minimization of field inhomogeneities in high resolution NMR." Doctoral thesis, University of Oulu, 2001. http://urn.fi/urn:isbn:9514264762.

Full text
Abstract:
Abstract In this work, the homogeneity of both the B0 and B1 fields was studied. Both B0 and B1 field homogeneities are the basic assumptions of high resolution liquid state NMR. Although some inhomogeneity of both of the fields is always present, the spectrometers can be operated, with the help of the developed spectral purging techniques, without giving any thought to the field inhomogeneities or the necessary actions to minimize their adverse effects. Although the effect of B0 inhomogeneity can occasionally be seen, the B1 fieldin a modern probe head is often assumed to be sufficiently homogenous for any practical purpose. By using the method used in this study the B1 field strength along one axis, typically the z-axis, can be easily mapped. Based on the information gathered from a single experiment, one can obtain reliable and valuable information about the B1 field distribution, e.g. homogeneity of the coil. From such information, the degree of required artifact suppressing methods for successful NMR experiments can be determined. Since normal pulse length calibration also requires the acquisition of several 1-D spectra, the required experimentation time is not increased. Although the maximum amount of signal from an NMR experiment is obtained when the signal is acquired from a maximum number of resonating spins, the results presented show that significantly more homogenous B1 field along the active sample volume is achieved by rejection of the signal originating from the outer parts of the coil length. Although the total amount of signal obtained from the outer parts of the RF-coil is not very high, some loss of signal is associated with the spatially selective acquisition. The rejected signal, however, is a significant source of artifacts, and if no precautions were taken, the artifacts would severely decrease the quality of the acquired data. If the sample concentration can be increased, it would be advantageous to dissolve the amount of sample available in as small an amount of solvent as is possible and place the sample in the most B1 homogenous part of the probe-head RF-coil. With the same amount of nuclear spins concentrated into a smaller volume, the sensitivity of an NMR experiment can be increased manifold. As an application of a spatially selective data acquisition, a versatile method capable of producing a map of the B0 field strength and its variation along the sample volume is presented.
APA, Harvard, Vancouver, ISO, and other styles
8

Lyne, Michael Peter. "High resolution spectroscopy of aminoborane and niobium nitride." Thesis, University of British Columbia, 1987. http://hdl.handle.net/2429/26442.

Full text
Abstract:
The infrared spectrum of aminoborane (NH₂BH₂) was recorded by a Fourier transform interferometer and the 1550-1750 cm⁻¹ region of the spectrum was rotationally analyzed by a new search/match algorithm based on ground state combination differences. Sub-bands from four separate vibrational bands were discovered in this region. The interaction scheme was deduced to be a three-way anharmonic resonance between the V₃, V₇ + VB, and 2v₆ levels with the fourth level, V₆ + V₁₂ induced by a Coriolis mechanism with the members of the triad. The first order anharmonic constants were approximated by a least squares fit of the triad intensities: W₃₇₈ = 8.4±0.1 cm⁻¹, W₃₆₆ = 15.8±0.4 cm⁻¹ with W₇₈₆₆ held fixed at zero. Perturbations from unseen interloper levels plus the fully correlated nature of the pure vibrational anharmonic interaction prevented a successful fit of the rotational structure of this system. Both the search/match and the intensity least squares algorithms were developed for this work. Four sub-bands in the red-orange region of the laser induced fluorescence spectrum of niobium nitride (NbN) were rotationally analyzed. Analysis of three sub-bands of the ³ϕ₂ - ³Δ₁ system allowed the vibrational spacings of each electronic state to be determined: ΔG½ = 986.351 cm⁻¹, ΔG1½ = 977.855 cm⁻¹ for the ³ϕ₂ state and ΔG1½, =. 1033.739cm⁻¹ for the ³Δ₁, state. The previously unassigned ³Π₁-³Δ₂ (0-0) sub-band was discovered 970 cm⁻¹ below its expected position of 18025 cm⁻¹. The electronic state assignment of this transition was confirmed by -wavelength resolved fluorescence measurements made with a diode array detector mounted on a spectrometer. A description of how the diode array detector was interfaced into the experiment is given.
Science, Faculty of
Chemistry, Department of
Graduate
APA, Harvard, Vancouver, ISO, and other styles
9

Clark, James Joseph. "Multi-resolution stereo vision with application to the automated measurement of logs." Thesis, University of British Columbia, 1985. http://hdl.handle.net/2429/25582.

Full text
Abstract:
A serial multi-resolution stereo matching algorithm is presented that is based on the Marr-Poggio matcher (Marr and Poggio, 1979). It is shown that the Marr-Poggio feature disambiguation and in-range/out-of-range mechanisms are unreliable for non-constant disparity functions. It is proposed that a disparity function estimate reconstructed from the disparity samples at the lower resolution levels be used to disambiguate possible matches at the high resolutions. Also presented is a disparity scanning algorithm with a similar control structure, which is based on an algorithm recently proposed by Grimson (1985). It is seen that the proposed algorithms will function reliably only if the disparity measurements are accurate and if the reconstruction process is accurate. The various sources of errors in the matching are analyzed in detail. Witkin's (Witkin, 1983) scale space is used as an analytic tool for describing a hitherto unreported form of disparity error, that caused by spatial filtering of the images with non-constant disparity functions. The reconstruction process is analyzed in detail. Current methods for performing the reconstruction are reviewed. A new method for reconstructing functions from arbitrarily distributed samples based on applying coordinate transformations to the sampled function is presented. The error due to the reconstruction process is analyzed, and a general formula for the error as a function of the function spectra, sample distribution and reconstruction filter impulse response is derived. Experimental studies are presented which show how the matching algorithms perform with surfaces of varying bandwidths, and with additive image noise. It is proposed that matching of scale space feature maps can eliminate many of the problems that the Marr-Poggio type of matchers have. A method for matching scale space maps which operates in the domain of linear disparity functions is presented. This algorithm is used to experimentally verify the effect of spatial filtering on the disparity measurements for non-constant disparity functions. It is shown that measurements can be made on the binocular scale space maps that give an independent estimate of the disparity gradient this leads to the concept of binocular diffrequency. It is shown that the diffrequency measurements are not affected by the spatial filtering effect for linear disparities. Experiments are described which show that the disparity gradient can be obtained by diffrequency measurement. An industrial application for stereo vision is described. The application is automated measurement of logs, or log scaling. A moment based method for estimating the log volume from the segmented two dimensional disparity map of the log scene is described. Experiments are described which indicate that log volumes can be estimated to within 10%.
Applied Science, Faculty of
Electrical and Computer Engineering, Department of
Graduate
APA, Harvard, Vancouver, ISO, and other styles
10

Levine, Peter 1978. "High-resolution time measurement and calibration for on-chip test systems." Thesis, McGill University, 2004. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=81550.

Full text
Abstract:
Verification of timing performance in integrated circuits (ICs) is becoming more difficult as clock frequencies and levels of integration increase. As a result, on-chip timing measurement has become a very attractive solution because it helps to overcome the bandwidth and test access limitations inherent in traditional off-chip test systems.
Flash time-to-digital converters (TDCs) are well-suited for use in on-chip timing measurement systems because they can be operated at high speeds, offer low test time, and are relatively easy to integrate. However, clock jitter in modern ICs is often on the same order of magnitude as the temporal resolution of the TDC itself. Therefore, techniques are required to increase the resolution of these devices, while ensuring timing accuracy.
This thesis presents a high-resolution flash TDC that exploits the random offsets on flip-flops or arbiters to perform time quantization. It also describes a novel technique based on additive temporal noise to accurately calibrate the measurement device. Simulation and experimental results reveal that this method can calibrate the high-resolution flash TDC down to 5 ps within reasonable error limits. In addition, accurate timing measurement of jitter below 14 ps has been experimentally validated using a custom flash TDC fabricated in a 0.18-mum CMOS process.
A review of the most common circuit techniques for timing measurement is also included in this thesis. Furthermore, a calibration system implementation that can be used to reduce the temporal resolution requirements of phase-generation circuitry is proposed.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Measurement resolution"

1

Tyler, Tom R. The quality of dispute resolution processes and outcomes: Measurement problems and possibilities. Madison, Wis: Institue for Legal Studies, University of Wisconsin-Madison, Law School, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Institute Of Electrical and Electronics Engineers. IEEE standard on video techniques: Measurement of resolution of camera systems, 1993 techniques. New York: The Institute, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Ravallion, Martin. When method matters: Toward a resolution of the debate about Bangladesh's poverty measures. Washington, D.C: World Bank, Policy Research Dept., Poverty and Human Resources Division, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Gerland, Sebastian. Zerstörungsfreie hochauflösende Dichteuntersuchungen mariner Sedimente =: Non-destructive high resolution density measurements on marine sediments. Bremerhaven: Alfred-Wegener-Institut für Polar- und Meeresforschung, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Flaska, Marek. A compact fast-neutron producing target for high resolution cross section measurements. Delft: Delft University Press, 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Flaška, Marek. A compact fast-neutron producing target for high resolution crosss section measurements. Amsterdam: IOS Press, 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Staelin, David H. High-spatial-resolution passive microwave sounding systems: Final report : covering the period February 1, 1980-March 14, 1994. Cambridge, Mass: Massachusetts Institute of Technology, Research Laboratory of Electronics, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Scherer, E. Computerized preference-avoidance quantification and analysis: A rapid, high-resolution method. Winnipeg, Man: Central and Arctic Region, Dept. of Fisheries and Oceans, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Becker, Kyle M. Geoacoustic inversion in laterally varying shallow-water experiments using high-resolution wavenumber estimation. Cambridge, Mass: Massachusetts Institute of Technology, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Hewett, Jason E. A method for angular resolution measurement for the Sudbury Neutrino Observatory detector using an 16N calibration source. Sudbury, Ont: Laurentian University, Department of Physics and Astronomy, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Measurement resolution"

1

Beverly, Robert, William Brinkmeyer, Matthew Luckie, and Justin P. Rohrer. "IPv6 Alias Resolution via Induced Fragmentation." In Passive and Active Measurement, 155–65. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-36516-4_16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Vermeulen, Kevin, Burim Ljuma, Vamsi Addanki, Matthieu Gouel, Olivier Fourmaux, Timur Friedman, and Reza Rejaie. "Alias Resolution Based on ICMP Rate Limiting." In Passive and Active Measurement, 231–48. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-44081-7_14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Padmanabhan, Ramakrishna, Zhihao Li, Dave Levin, and Neil Spring. "UAv6: Alias Resolution in IPv6 Using Unused Addresses." In Passive and Active Measurement, 136–48. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-15509-8_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Al-Dalky, Rami, and Kyle Schomp. "Characterization of Collaborative Resolution in Recursive DNS Resolvers." In Passive and Active Measurement, 146–57. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-76481-8_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Cantoni, V., L. Carrioli, M. Ferretti, L. Lombardi, and K. Matthews. "Object Recognition In Multi-Resolution Systems." In Real-Time Object Measurement and Classification, 359–74. Berlin, Heidelberg: Springer Berlin Heidelberg, 1988. http://dx.doi.org/10.1007/978-3-642-83325-0_23.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Webster, P. J. "Spatial Resolution and Strain Scanning." In Measurement of Residual and Applied Stress Using Neutron Diffraction, 235–51. Dordrecht: Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-011-2797-4_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Lang, Jens, and Gudula Rünger. "High-Resolution Power Profiling of GPU Functions Using Low-Resolution Measurement." In Euro-Par 2013 Parallel Processing, 801–12. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-40047-6_80.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Ling, D. S. H., H. Y. Hsu, G. C. I. Lin, and S. H. Lee. "Improving Measurement Accuracy Using Image Super-Resolution." In Key Engineering Materials, 699–704. Stafa: Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-977-6.699.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Sentker, A., and W. Riess. "High Resolution Measurement of Turbulence in Axial Compressors." In Notes on Numerical Fluid Mechanics (NNFM), 304–10. Wiesbaden: Vieweg+Teubner Verlag, 1997. http://dx.doi.org/10.1007/978-3-322-86573-1_39.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Lin, Jianyu, Neil T. Clancy, Yang Hu, Ji Qi, Taran Tatla, Danail Stoyanov, Lena Maier-Hein, and Daniel S. Elson. "Endoscopic Depth Measurement and Super-Spectral-Resolution Imaging." In Lecture Notes in Computer Science, 39–47. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-66185-8_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Measurement resolution"

1

Kadanec, J., J. Zelinka, G. Bukor, and M. Tysler. "ProCardio 8 — System for high resolution ECG mapping." In 2017 11th International Conference on Measurement. IEEE, 2017. http://dx.doi.org/10.23919/measurement.2017.7983586.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Burns, Peter D., and Judit Martinez Bauza. "Intrinsic camera resolution measurement." In IS&T/SPIE Electronic Imaging, edited by Mohamed-Chaker Larabi and Sophie Triantaphillidou. SPIE, 2015. http://dx.doi.org/10.1117/12.2083193.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Li, Jianhua, and Lin Liao. "Multi-Resolution-Based Contour Corner Extraction Algorithm for Computer Vision-Based Measurement." In ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/detc2018-85890.

Full text
Abstract:
Corner-based registration of the industry standard contour and the actual product contour is one of the key steps in industrial computer vision-based measurement. However, existing corner extraction algorithms do not achieve satisfactory results in the extraction of the standard contour and the deformed contour of the actual product. This paper proposes a multi-resolution-based contour corner extraction algorithm for computer vision-based measurement. The algorithm first obtains different corners in multiple resolutions, then sums up the weighted corner values, and finally chooses the corner points with the appropriate corner values as the final contour corners. The experimental results show that the proposed algorithm, based on multi-resolution, outperforms the original algorithm in the aspect of the corner matching situation and helps in subsequent product measurements.
APA, Harvard, Vancouver, ISO, and other styles
4

Zhou, Zili, G. Frucci, Saeedeh Jahanmirinejad, F. Mattioli, A. Gaggero, R. Leoni, and A. Fiore. "N-photon Autocorrelator with Picosecond Temporal Resolution." In Quantum Information and Measurement. Washington, D.C.: OSA, 2012. http://dx.doi.org/10.1364/qim.2012.qw4a.4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Ferreira da Silva, Thiago, Guilherme P. Temporão, and Jean Pierre von der Weid. "Enhanced phase resolution with indistinguishable weak coherent states." In Quantum Information and Measurement. Washington, D.C.: OSA, 2014. http://dx.doi.org/10.1364/qim.2014.qth3a.6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Zhang, Qiao, Vincent Liu, Hongyi Zeng, and Arvind Krishnamurthy. "High-resolution measurement of data center microbursts." In IMC '17: Internet Measurement Conference. New York, NY, USA: ACM, 2017. http://dx.doi.org/10.1145/3131365.3131375.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Cameron, Peter. "A Possible Resolution of the Black Hole Information Paradox." In Quantum Information and Measurement. Washington, D.C.: OSA, 2013. http://dx.doi.org/10.1364/qim.2013.w6.01.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Vega, Andres, Elkin Santos, Jorge Fuenzalida, Marta Gilaberte Basset, Thomas Pertsch, Markus Gräfe, Sina Saravi, and Frank Setzpfandt. "Resolution of two-color quantum imaging with undetected photons." In Quantum Information and Measurement. Washington, D.C.: OSA, 2021. http://dx.doi.org/10.1364/qim.2021.th4a.4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Bharkhada, Deepak, Harold Rothfuss, and Maurizio Conti. "Comparison of Time Resolution Measurement Methods." In 2017 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC). IEEE, 2017. http://dx.doi.org/10.1109/nssmic.2017.8532866.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Lodge, Martin A., John J. Sunderland, and Arman Rahmim. "About Measurement of PET Spatial Resolution." In 2018 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC). IEEE, 2018. http://dx.doi.org/10.1109/nssmic.2018.8824553.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Measurement resolution"

1

Richardson, Dylan, Grant W. Helmreich, Alicia Raftery, and Andrew Nelson. Resolution Capabilities for Measurement of Fuel Swelling using Tomography. Office of Scientific and Technical Information (OSTI), February 2019. http://dx.doi.org/10.2172/1493981.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Atanov, N. Measurement of Time Resolution of the Mu2e LYSO Calorimeter Prototype. Office of Scientific and Technical Information (OSTI), September 2015. http://dx.doi.org/10.2172/1223256.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Yue, Dick K., and Yuming Liu. High-Resolution Measurement-Based Phase-Resolved Prediction of Ocean Wavefields. Fort Belvoir, VA: Defense Technical Information Center, September 2008. http://dx.doi.org/10.21236/ada533980.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Yue, Dick K., and Yuming Liu. High-Resolution Measurement-Based Phase-Resolved Prediction of Ocean Wavefields. Fort Belvoir, VA: Defense Technical Information Center, September 2010. http://dx.doi.org/10.21236/ada542497.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Espinosa, Horacio D. Instrumentation for Full Field Deformation Measurement with Nano-Second Resolution. Fort Belvoir, VA: Defense Technical Information Center, November 1998. http://dx.doi.org/10.21236/ada367428.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Yue, Dick K., and Yuming Liu. High-Resolution Measurement-Based Phase-Resolved Prediction of Ocean Wavefields. Fort Belvoir, VA: Defense Technical Information Center, September 2012. http://dx.doi.org/10.21236/ada590520.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Shen, Lian. High-Resolution Measurement-Based Phase-Resolved Prediction of Ocean Wavefields. Fort Belvoir, VA: Defense Technical Information Center, September 2007. http://dx.doi.org/10.21236/ada573052.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Yue, Dick K., and Yuming Liu. High-Resolution Measurement-Based Phase-Resolved Prediction of Ocean Wavefields. Fort Belvoir, VA: Defense Technical Information Center, September 2007. http://dx.doi.org/10.21236/ada573409.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Yue, Dick K., and Yuming Liu. High-Resolution Measurement-Based Phase-Resolved Prediction of Ocean Wavefields. Fort Belvoir, VA: Defense Technical Information Center, September 2011. http://dx.doi.org/10.21236/ada557067.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Parsons, Jeff. High-Resolution Measurement of Sediment Concentration in Convectively Unstable Sediment Clouds. Fort Belvoir, VA: Defense Technical Information Center, September 2001. http://dx.doi.org/10.21236/ada626990.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Measurement resolution' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography