Log in

Relevant bibliographies by topics / Measurement protocol

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Measurement protocol'

Author: Grafiati

Published: 23 July 2022

Last updated: 14 March 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Measurement protocol.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Measurement protocol"

1

Pate, Russell R. "Measurement Protocol." Medicine & Science in Sports & Exercise 39, Supplement (May 2007): 60. http://dx.doi.org/10.1249/01.mss.0000272668.39734.16.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Golowasch, Jorge, Gladis Thomas, Adam L. Taylor, Arif Patel, Arlene Pineda, Christopher Khalil, and Farzan Nadim. "Membrane Capacitance Measurements Revisited: Dependence of Capacitance Value on Measurement Method in Nonisopotential Neurons." Journal of Neurophysiology 102, no. 4 (October 2009): 2161–75. http://dx.doi.org/10.1152/jn.00160.2009.

Full text

Abstract:

During growth or degeneration neuronal surface area can change dramatically. Measurements of membrane protein concentration, as in ion channel or ionic conductance density, are often normalized by membrane capacitance, which is proportional to the surface area, to express changes independently from cell surface variations. Several electrophysiological protocols are used to measure cell capacitance, all based on the assumption of membrane isopotentiality. Yet, most neurons violate this assumption because of their complex anatomical structure, raising the question of which protocol yields measurements that are closest to the actual total membrane capacitance. We measured the capacitance of identified neurons from crab stomatogastric ganglia using three different protocols: the current-clamp step, the voltage-clamp step, and the voltage-clamp ramp protocols. We observed that the current-clamp protocol produced significantly higher capacitance values than those of either voltage-clamp protocol. Computational models of various anatomical complexities suggest that the current-clamp protocol can yield accurate capacitance estimates. In contrast, the voltage-clamp protocol estimates rapidly deteriorate as isopotentiality is reduced. We provide a mathematical description of these results by analyzing a simple two-compartment model neuron to facilitate an intuitive understanding of these methods. Together, the experiments, modeling, and mathematical analysis indicate that accurate total membrane capacitance measurements cannot be obtained with voltage-clamp protocols in nonisopotential neurons. Furthermore, although current-clamp steps can theoretically yield accurate measurements, experimentalists should be aware of limitations imposed by step duration and numerical errors during fitting procedures to obtain the membrane time constant.

APA, Harvard, Vancouver, ISO, and other styles

3

Ventham, Jonathan C., and John J. Reilly. "Reproducibility of resting metabolic rate measurement in children." British Journal of Nutrition 81, no. 6 (June 1999): 435–37. http://dx.doi.org/10.1017/s0007114599000781.

Full text

Abstract:

The aim of the present study was to determine the reproducibility of measurement of resting metabolic rate (RMR) using a ventilated-hood indirect calorimeter in children using a short protocol suitable for the outpatient setting or home visit. The protocol consisted of an overnight (10–12 h) fast, 5–10 min supine rest, 5–10 min ‘settling in’ under the ventilated hood, and 12–16 min of measurement. Three measurements of RMR were made in eighteen healthy children (nine boys, nine girls, aged 6–11 years) on alternate days. Reproducibility of RMR was assessed using a reproducibility index and by calculating the CV for intra-individual measurements. The mean CV was 2·6 (sd 1·7)% and the reproducibility index was 95·0 %, indicating excellent reliability. The short protocol had higher reproducibility than more stringent protocols described in the literature. The new protocol has a number of practical advantages and should be adequate for most clinical or research purposes.

APA, Harvard, Vancouver, ISO, and other styles

4

Haah, Jeongwan, and Matthew B. Hastings. "Measurement sequences for magic state distillation." Quantum 5 (January 20, 2021): 383. http://dx.doi.org/10.22331/q-2021-01-20-383.

Full text

Abstract:

Magic state distillation uses special codes to suppress errors in input states, which are often tailored to a Clifford-twirled error model. We present detailed measurement sequences for magic state distillation protocols which can suppress arbitrary errors on any part of a protocol, assuming the independence of errors across qubits. Provided with input magic states, our protocol operates on a two-dimensional square grid by measurements of ZZ on horizontal pairs of qubits, XX on vertical pairs, and Z,X on single qubits.

APA, Harvard, Vancouver, ISO, and other styles

5

Forsyth, Ann, Kathryn H. Schmitz, Michael Oakes, Jason Zimmerman, and Joel Koepp. "Standards for Environmental Measurement Using GIS: Toward a Protocol for Protocols." Journal of Physical Activity and Health 3, s1 (February 2006): S241—S257. http://dx.doi.org/10.1123/jpah.3.s1.s241.

Full text

Abstract:

Background:Interdisciplinary research regarding how the built environment influences physical activity has recently increased. Many research projects conducted jointly by public health and environmental design professionals are using geographic information systems (GIS) to objectively measure the built environment. Numerous methodological issues remain, however, and environmental measurements have not been well documented with accepted, common definitions of valid, reliable variables.Methods:This paper proposes how to create and document standardized definitions for measures of environmental variables using GIS with the ultimate goal of developing reliable, valid measures. Inherent problems with software and data that hamper environmental measurement can be offset by protocols combining clear conceptual bases with detailed measurement instructions.Results:Examples demonstrate how protocols can more clearly translate concepts into specific measurement.Conclusions:This paper provides a model for developing protocols to allow high quality comparative research on relationships between the environment and physical activity and other outcomes of public health interest.

APA, Harvard, Vancouver, ISO, and other styles

6

Liggett, W., K. ‐W Moon, and C. Handwerker. "An Experimental Method for Refinement of Solderability Measurement." Soldering & Surface Mount Technology 9, no. 2 (December 1, 1997): 14–21. http://dx.doi.org/10.1108/09540919710195181.

Full text

Abstract:

An experimental method for measurement system improvement is presented and applied to development of a protocol for solderability measurement with a wetting balance. Protocol development is central to development of reliable monitoring systems for manufacturing. This paper illustrates the method with an experiment in which sets of nearly identical test leads, each with a different solderability, are obtained by steam ageing of hot‐solder‐dipped copper and then measured according to alternative protocols. The protocols entail different flux types and solder bath temperatures. This method can be used wherever solderability measurements are made and thus satisfies the need for in‐house refinement of wetting balance protocols.With the experimental method, one can both compare alternative measurement protocols and estimate the relative solderability of sets of test leads. The results of both depend on what feature of the wetting force curve one selects to portray solderability. The comparison of measurement protocols is based on what is variously called precision, sensitivity, or signal‐to‐noise ratio. The solderability estimates show that different physical properties of the test leads affect different parts of the wetting force curve, and that changes in the steam ageing procedure affect solderability in a generally predictable way.

APA, Harvard, Vancouver, ISO, and other styles

7

Zhou, Zishuai, Qisheng Guang, Chaohui Gao, Dong Jiang, and Lijun Chen. "Measurement-Device-Independent Two-Party Cryptography with Error Estimation." Sensors 20, no. 21 (November 7, 2020): 6351. http://dx.doi.org/10.3390/s20216351.

Full text

Abstract:

We present an innovative method for quantum two-party cryptography. Our protocol introduces joint measurement and error estimation to improve the security of two-party cryptographic protocols. Our protocol removes the assumption of the attacker’s limited power and catches the attacking actions through highly estimated bit error rate. Our protocol is formally proved to be secure against both eavesdroppers and dishonest communication parties. We also utilize our designed protocol to construct two specific two-party cryptographic applications: Quantum bit commitment and quantum password identification.

APA, Harvard, Vancouver, ISO, and other styles

8

Alharbi, Samah, Sijung Hu, David Mulvaney, Laura Barrett, Liangwen Yan, Panos Blanos, Yasmin Elsahar, and Samuel Adema. "Oxygen Saturation Measurements from Green and Orange Illuminations of Multi-Wavelength Optoelectronic Patch Sensors." Sensors 19, no. 1 (December 31, 2018): 118. http://dx.doi.org/10.3390/s19010118.

Full text

Abstract:

Photoplethysmography (PPG) based pulse oximetry devices normally use red and infrared illuminations to obtain oxygen saturation (SpO2) readings. In addition, the presence of motion artefacts severely restricts the utility of pulse oximetry physiological measurements. In the current study, a combination of green and orange illuminations from a multi-wavelength optoelectronic patch sensor (mOEPS) was investigated in order to improve robustness to subjects’ movements in the extraction of SpO2 measurement. The experimental protocol with 31 healthy subjects was divided into two sub-protocols, and was designed to determine SpO2 measurement. The datasets for the first sub-protocol were collected from 15 subjects at rest, with the subjects free to move their hands. The datasets for the second sub-protocol with 16 subjects were collected during cycling and walking exercises. The results showed good agreement with SpO2 measurements (r = 0.98) in both sub-protocols. The outcomes promise a robust and cost-effective approach of physiological monitoring with the prospect of providing health monitoring that does not restrict user physical movements.

APA, Harvard, Vancouver, ISO, and other styles

9

Peyrard, Fabrice. "Real-time performance evaluation of Bluetooth ARQ protocol." Journal of Communications Software and Systems 3, no. 4 (December 20, 2007): 248. http://dx.doi.org/10.24138/jcomss.v3i4.246.

Full text

Abstract:

These research tasks present a measurement platform of Bluetooth asynchronous links in order to get the intrinsic time constraints of this network and communications protocols. These time measurements are necessary for the application we wish to implement for mobile robot control through Bluetooth link communication. We present the platform as well as the measurement protocol which we have carried out from real-time communicating operating systems. We have developed an application of radio and time data processing allowing a real-time evaluation of the global behavior of the communicating system.

APA, Harvard, Vancouver, ISO, and other styles

10

Migdall, A. L. "Absolute quantum efficiency measurements using: toward a measurement protocol." IEEE Transactions on Instrumentation and Measurement 50, no. 2 (April 2001): 478–81. http://dx.doi.org/10.1109/19.918170.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Measurement protocol"

1

Wu, Chen. "A new TCP protocol based on end-to-end available bandwidth measurement /." View abstract or full-text, 2005. http://library.ust.hk/cgi/db/thesis.pl?ELEC%202005%20WU.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Horn, Stacey Lynn. "Evaluation of a new standardized modified ramp protocol : the modified BSU ramp protocol." Virtual Press, 1999. http://liblink.bsu.edu/uhtbin/catkey/1129626.

Full text

Abstract:

The purpose of this study was to develop a prediction equation for peak oxygen uptake using the Modified BSU Ramp protocol. Thirty-four subjects (14 men and 20 women, age 32-83 years) completed the standard Ball State University Adult Physical Fitness Program quiet and exercise testing sessions, with the maximal exercise test conducted with the Modified BSU Ramp protocol. The modified ramp protocol increases speed and grade every 20 seconds, and it increases by - 0.15 METs every increment for the first 6 minutes and --0.3 METs per increment thereafter. The Modified BSU ramp protocol was developed to allow for reasonable exercise test times from a standardized ramp protocol with individuals with low functional capacities < 10 METs. Pre-test procedures included height and weight measurements, resting blood pressure, resting heart rate, body fat measures, a blood lipid profile, and resting electrocardiogram (ECG). Exercise testing included ECG, heart rate, and blood pressure that were recorded prior to, during, and in the recovery phase of exercise. Subjects were instructed to continue exercise until fatigue, and respiratory gases were collected to determine V02 . Data was then analyzed using multiple regression techniques. Gender, age, body weight, and treadmill test time were the significant predictors, which were used in the regression equation (R2 = 0.586, SEE = 3.54 ml-kg-'.min'). An equation was developed from the lone predictor, treadmill test time with R2 = .37 and SEE = 4.1 ml•kg'•min'. The equation is as follows: VOA = 4.932 + 1.934 (test time (min)). Of the tests conducted on the Modified BSU ramp protocol, 82% were within an "ideal" test time window of 812 minutes, and 97% were within an "acceptable" test time window of 6-15 minutes. In conclusion, VOA can be estimated with acceptable accuracy (i.e. SEE - ± I MET) from the Modified BSU Ramp protocol, and for clinical purposes it is a suitable protocol to use when testing low fit individuals.
School of Physical Education

APA, Harvard, Vancouver, ISO, and other styles

3

Carter, Steven Michael. "Implementation and analysis of the IP measurement protocol (IPMP)." Master's thesis, Mississippi State : Mississippi State University, 2001. http://library.msstate.edu/etd/show.asp?etd=etd-11152001-090121.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

McCarthy, Meghan K. "FACTORS AFFECTING AERODYNAMIC MEASUREMENT IN PEDIATRIC AIRWAY PATHOLOGIES." Miami University / OhioLINK, 2007. http://rave.ohiolink.edu/etdc/view?acc_num=miami1177036003.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Tumkur, Anand AswathaNarayana, and Avijit Dutta. "PROTOCOL PERFORMANCE MEASUREMENT METHODOLOGY - EXPERIMENTATION WITH SIGNALING SYSTEM NO 7." Thesis, Mälardalen University, School of Innovation, Design and Engineering, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-6226.

Full text

Abstract:

Performance is the driving force for the effective network utilization in the current telecommunication world. The thesis aims to define suitable performance measurement methodologies for communication over stack based Signalling System No 7 (SS7). This thesis also throws a quick glance on open source SS7 and Ericsson proprietary SS7 protocols, to devise performance measurement approach that can be adopted to develop sophisticated tools. We adopt a scientific experimental approach for numerical measurement of throughput and latency of the protocol stack. Our current work finishes experimentation with open source SS7 protocol (SCTP) in Fedora based two identical servers. SCTP (Stream Control Transmission Protocol) is an important transport layer protocol for communication of SS7 message over an IP network. Message communication using SCTP protocol over an IP/Ethernet network between these two identical servers has been measured and analyzed using the IPerf tool. TCP (Transmission Control Protocol) being another important transport layer protocol of TCP/IP stack, the performance of TCP is compared with SCTP. The results prove that under normal circumstances TCP gains over SCTP and our analysis support that under multi homing support, SCTP should gain over TCP when throughput is measured

APA, Harvard, Vancouver, ISO, and other styles

6

Nichols, James G. "Measurement of Windows streaming media." Link to electronic thesis, 2004. http://www.wpi.edu/Pubs/ETD/Available/etd-0422104-195255.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Al-Akhras, Mousa Tawfiq. "Quality of media traffic over lossy internet protocol networks : measurement and improvement." Thesis, De Montfort University, 2007. http://hdl.handle.net/2086/5004.

Full text

Abstract:

Voice over Internet Protocol (VoIP) is an active area of research in the world of communication. The high revenue made by the telecommunication companies is a motivation to develop solutions that transmit voice over other media rather than the traditional, circuit switching network. However, while IP networks can carry data traffic very well due to their besteffort nature, they are not designed to carry real-time applications such as voice. As such several degradations can happen to the speech signal before it reaches its destination. Therefore, it is important for legal, commercial, and technical reasons to measure the quality of VoIP applications accurately and non-intrusively. Several methods were proposed to measure the speech quality: some of these methods are subjective, others are intrusive-based while others are non-intrusive. One of the non-intrusive methods for measuring the speech quality is the E-model standardised by the International Telecommunication Union-Telecommunication Standardisation Sector (ITU-T). Although the E-model is a non-intrusive method for measuring the speech quality, but it depends on the time-consuming, expensive and hard to conduct subjective tests to calibrate its parameters, consequently it is applicable to a limited number of conditions and speech coders. Also, it is less accurate than the intrusive methods such as Perceptual Evaluation of Speech Quality (PESQ) because it does not consider the contents of the received signal. In this thesis an approach to extend the E-model based on PESQ is proposed. Using this method the E-model can be extended to new network conditions and applied to new speech coders without the need for the subjective tests. The modified E-model calibrated using PESQ is compared with the E-model calibrated using i ii subjective tests to prove its effectiveness. During the above extension the relation between quality estimation using the E-model and PESQ is investigated and a correction formula is proposed to correct the deviation in speech quality estimation. Another extension to the E-model to improve its accuracy in comparison with the PESQ looks into the content of the degraded signal and classifies packet loss into either Voiced or Unvoiced based on the received surrounding packets. The accuracy of the proposed method is evaluated by comparing the estimation of the new method that takes packet class into consideration with the measurement provided by PESQ as a more accurate, intrusive method for measuring the speech quality. The above two extensions for quality estimation of the E-model are combined to offer a method for estimating the quality of VoIP applications accurately, nonintrusively without the need for the time-consuming, expensive, and hard to conduct subjective tests. Finally, the applicability of the E-model or the modified E-model in measuring the quality of services in Service Oriented Computing (SOC) is illustrated.

APA, Harvard, Vancouver, ISO, and other styles

8

Ganzeveld, Paula. "Combining quality and curriculum-based measurement : a suggested assessment protocol in writing." Diss., University of Iowa, 2015. https://ir.uiowa.edu/etd/1968.

Full text

Abstract:

Curriculum-Based Measures in writing (CBM-W) assesses a variety of fluency-based components of writing. While support exists for the use of CBM measures in the area of writing, there is a need to conduct further validation studies to investigate the utility of these measures within elementary and secondary classrooms. Since only countable indices are used in CBM-W, this study explored the possibility of using an assessment that measured writing quality in conjunction with the CBM metric. To accomplish this, three pieces of data were used in this study. The CBM metrics of total words written, words spelled correctly, correct word sequences, percentage of words spelled correctly, and percentage of correct word sequences were scored from a timed writing passage that second grade students completed. Scores from the district writing assessment that classroom teachers rated using an analytic rubric that focused on quality were also analyzed. Last, a validated writing assessment, the TOWL-3, was used as the criterion measure. Using correlation and regression methods, results indicated that correct word sequences was the best predictor performance on the TOWL-3. Even though the teacher writing assessment correlated with the TOWL-3 at the significant level, adding it to the scores from the CBM-W measures did not significantly increase the validity.

APA, Harvard, Vancouver, ISO, and other styles

9

Ray, Tim. "Using the CCSDS File Delivery Protocol (CFDP) on the Global Precipitation Measurement mission." International Foundation for Telemetering, 2004. http://hdl.handle.net/10150/605342.

Full text

Abstract:

International Telemetering Conference Proceedings / October 18-21, 2004 / Town & Country Resort, San Diego, California
The Consultative Committee for Space Data Systems (CCSDS) developed the CCSDS File Delivery Protocol (CFDP) to provide reliable delivery of files across space links. Space links are typically intermittent, requiring flexibility on the part of CFDP. Some aspects of that flexibility will be highlighted in this paper, which discusses the planned use of CFDP on the Global Precipitation Measurement (GPM) mission. The operational scenario for GPM involves reliable downlink of science data files at a high datarate (approximately 4 megabits per second) over a space link that is not only intermittent, but also one-way most of the time. This paper will describe how that scenario is easily handled by CFDP, despite the fact that reliable delivery requires a feedback loop.

APA, Harvard, Vancouver, ISO, and other styles

10

Sargent, Matthew. "On Understanding the Internet Via Edge Measurement." Case Western Reserve University School of Graduate Studies / OhioLINK, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=case1432290894.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Measurement protocol"

1

International Performance Measurement & Verification Protocol Committee, United States. Dept. of Energy. Office of Energy Efficiency and Renewable Energy, and National Renewable Energy Laboratory (U.S.), eds. International performance measurement & verification protocol. [Washington, D.C.]: Office of Energy Efficiency and Renewable Energy, U.S. Dept. of Energy, 2001.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

International Performance Measurement & Verification Protocol Committee., United States. Dept. of Energy. Office of Energy Efficiency and Renewable Energy., and National Renewable Energy Laboratory (U.S.), eds. International performance measurement & verification protocol. [Washington, D.C: U.S. Dept. of Energy, Office of Energy Efficiency and Renewable Energy], 2003.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

International Performance Measurement & Verification Protocol Committee., United States. Dept. of Energy. Office of Energy Efficiency and Renewable Energy., and National Renewable Energy Laboratory (U.S.), eds. International performance measurement & verification protocol. [Washington, D.C: U.S. Dept. of Energy, Office of Energy Efficiency and Renewable Energy], 2002.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

International Performance Measurement & Verification Protocol Committee., United States. Dept. of Energy. Office of Energy Efficiency and Renewable Energy., and National Renewable Energy Laboratory (U.S.), eds. International performance measurement & verification protocol. [Washington, D.C: U.S. Dept. of Energy, Office of Energy Efficiency and Renewable Energy], 2002.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

United States. Dept. of Energy, ed. NEMVP: North American Energy Measurement and Verification Protocol. [Washington, DC]: Dept. of Energy, 1996.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

United States. Environmental Protection Agency. Office of Air Quality Planning and Standards and United States. Environmental Protection Agency. Emission Standards Division, eds. 1995 protocol for equipment leak emission estimates. Research Triangle Park, N.C: U.S. Environmental Protection Agency, Office of Air and Radiation, Office of Air Quality Planning and Standards, 1995.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

United States. Environmental Protection Agency. Office of Air Quality Planning and Standards. and United States. Environmental Protection Agency. Emission Standards Division., eds. 1995 protocol for equipment leak emission estimates. Research Triangle Park, N.C: U.S. Environmental Protection Agency, Office of Air and Radiation, Office of Air Quality Planning and Standards, 1995.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Wang, Shuxiang. Network performance measurement system for supporting ST-2 Network protocol. Dublin: University College Dublin, 1998.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Geoff, Pierce, Beusse Rick, and United States. Environmental Protection Agency. Office of the Inspector General, eds. EPA needs an oversight program for protocol gases. Washington, D.C: U.S. Environmental Protection Agency, Office of Inspector General, 2009.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Teefy, Susan. Tracer studies in water treatment facilities: A protocol and case studies. Denver, CO: AWWA Research Foundation and American Water Works Association, 1996.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Measurement protocol"

1

Thomas, Robert J. "Peak Measurement Protocol." In Measuring Heavy Metal Contaminants in Cannabis and Hemp, 165–77. First edition. | Boca Raton : Taylor and Francis, 2020.: CRC Press, 2020. http://dx.doi.org/10.1201/9781003004158-15.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Robert, Thomas. "Peak Measurement Protocol." In Measuring Elemental Impurities in Pharmaceuticals, 147–60. Boca Raton : Taylor & Francis, 2018. | Series: Practical spectroscopy ; [v. 40]: CRC Press, 2018. http://dx.doi.org/10.1201/b21952-14.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Hounsel, Austin, Paul Schmitt, Kevin Borgolte, and Nick Feamster. "Can Encrypted DNS Be Fast?" In Passive and Active Measurement, 444–59. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-72582-2_26.

Full text

Abstract:

AbstractIn this paper, we study the performance of encrypted DNS protocols and conventional DNS from thousands of home networks in the United States, over one month in 2020. We perform these measurements from the homes of 2,693 participating panelists in the Federal Communications Commission’s (FCC) Measuring Broadband America program. We found that clients do not have to trade DNS performance for privacy. For certain resolvers, DoT was able to perform faster than DNS in median response times, even as latency increased. We also found significant variation in DoH performance across recursive resolvers. Based on these results, we recommend that DNS clients (e.g., web browsers) should periodically conduct simple latency and response time measurements to determine which protocol and resolver a client should use. No single DNS protocol nor resolver performed the best for all clients.

APA, Harvard, Vancouver, ISO, and other styles

4

Hercog, Drago. "Protocol Analysis, Simulation and Measurement." In Communication Protocols, 95–98. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-50405-2_7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Beck, Charles M. "A traceability protocol to the SI by gravimetric analysis." In Traceability in Chemical Measurement, 192–94. Berlin, Heidelberg: Springer Berlin Heidelberg, 2005. http://dx.doi.org/10.1007/3-540-27093-0_31.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Pfahler, V., J. Adu-Gyamfi, D. O’Connell, and F. Tamburini. "Purification Protocol." In Oxygen Isotopes of Inorganic Phosphate in Environmental Samples, 33–44. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-97497-8_3.

Full text

Abstract:

AbstractThe five stepwise purification of extracts and final precipitation of silver phosphate (A1–A5) are described. The first two steps (A1 and A2) are removing organic matter and are concentrating the phosphate in the extract by reducing the volume. Certain cations could interfere with the precipitation of silver phosphate and are removed in step A3. Silver chloride, which, if not removed, could co-precipitate with silver phosphate, is removed in step A4. The final analyte is then precipitated in step A5. The filtration steps can be quite tedious, using vacuum filtration equipment is therefore recommended. Following step A5, the silver phosphate samples need to be weighed in for the measurement with a thermal conversion elemental analyser (TC/EA) coupled to a continuous-flow isotope-ratio mass spectrometer (IRMS).

APA, Harvard, Vancouver, ISO, and other styles

7

Xu, Haitao, Fengyuan Xu, and Bo Chen. "Internet Protocol Cameras with No Password Protection: An Empirical Investigation." In Passive and Active Measurement, 47–59. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-76481-8_4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Bhattacharya, Enakshi. "Readout Circuit and Measurement Protocol for Mini-EISCAPs." In Biosensing with Silicon, 55–76. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-92714-1_4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Ditty, Jayna L., Nancy N. Nichols, and Rebecca E. Parales. "Protocol for the Measurement of Hydrocarbon Transport in Bacteria." In Springer Protocols Handbooks, 55–67. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/8623_2014_11.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Weber, Jonathan. "Sending Data from Other Sources Using GA’s Measurement Protocol." In Practical Google Analytics and Google Tag Manager for Developers, 231–36. Berkeley, CA: Apress, 2015. http://dx.doi.org/10.1007/978-1-4842-0265-4_14.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Measurement protocol"

1

Haynes, Mark, Chih-Hang John Wu, Robert J. Peterman, and B. Terry Beck. "Prestressing Steel Reinforcement Wire Measurement Protocol." In 2014 Joint Rail Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/jrc2014-3800.

Full text

Abstract:

The purpose of this paper is to propose new measurement guidelines for pre-stressing steel reinforcement wire indent geometries. The current guidelines for measuring pre-stressing steel reinforcement wire indent geometries are within ASTM A881M-10. These measurement guidelines provide instructions on measuring indent depth, indent side wall angle, and indent orientation. However, since the creation ASTM A881M-10 new measurements have been presented that serve as better predictors of wire performance than the current measurement requirements. The new measure guidelines presented in this research have been shown to have superior correlation to transfer length and the pull out force of pre-stressing steel reinforcement wires used in concrete railroad ties. These measurement guidelines are intended to more completely quantify the surface profile of pre-stressing steel reinforcement wires and do so in a manner that adheres to the geometric dimensioning and tolerancing standards of ASME Y14.5-2009. The measurement guidelines presented in this research use the concept of minimal zone on a variety of different measurements. This includes measurements such as indent volume, indent surface area, and indent edge wall surface area. These new measurements are shown through a variety of statistical models to be strong predictors of transfer length and pull out force for the given reinforcement wire. By presenting these new measurement procedures that define the surface geometry of reinforcement wire indent geometry in greater detail, suppliers can present more complete information of their wire type to consumers. Likewise, consumers will be able to more fully define the design requirements that are needed for their pre-stressed concrete railroad ties. The overall impact of the proposed changes will be the improvement of the quality control of pre-stressing steel reinforcement wires and the extended lifespan and durability of pre-stressed concrete railroad ties.

APA, Harvard, Vancouver, ISO, and other styles

2

Suprano, Alessia, Danilo Zia, Emanuele Polino, Taira Giordani, Luca Innocenti, Alessandro Ferraro, Mauro Paternostro, Nicoló Spagnolo, and Fabio Sciarrino. "Real-time optimization of quantum state engineering protocol." In Quantum Information and Measurement. Washington, D.C.: OSA, 2021. http://dx.doi.org/10.1364/qim.2021.f2c.4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Hámornik, Balázs Péter, Márta Juhász, and Ildikó Vén. "Field measurement protocol for team communication." In the 7th International Conference. New York, New York, USA: ACM Press, 2010. http://dx.doi.org/10.1145/1931344.1931378.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Dornelas, Eduardo Carnier, Linei Augusta Brolini Dellê Urban, Carolina de Lima Bolzon, Iris Rabinovich, and Selene Elifio Esposito. "ABBREVIATED MRI PROTOCOL TO EVALUATE RESPONSE TO BREAST CANCER NEOADJUVANT CHEMOTHERAPY." In XXIV Congresso Brasileiro de Mastologia. Mastology, 2022. http://dx.doi.org/10.29289/259453942022v32s1002.

Full text

Abstract:

Introduction: Abbreviated MRI protocols have been proposed to reduce examination time, patient discomfort, and costs for breast cancer screening. However, an abbreviated MRI protocol for assessing neoadjuvant chemotherapy in breast cancer is yet to be explored. Objective: We sought to develop an abbreviated MRI protocol to evaluate the response to neoadjuvant chemotherapy treatment for invasive breast cancer carcinoma with diagnostic performance equivalent to that of the full protocol. Methods: This was a retrospective, single-center, cross-sectional study. This study comprised 210 women diagnosed with invasive breast carcinoma of no special type who underwent breast MRI after neoadjuvant chemotherapy between 2016 and 2020 in Curitiba, PR, Brazil. Breast MRI scans were reevaluated, first with access only to axial 3D SPAIR without contrast and first post-contrast time (two sequences); next to the second post-contrast time (three sequences); then to the third post-contrast time (four sequences); and finally, to the full protocol (seven sequences). The diagnostic performance (sensitivity, specificity, positive predictive value, negative predictive value, and accuracy) of the three abbreviated protocols and the full protocol was analyzed using the Wilcoxon nonparametric test. Results: The median age of the study population was 47 years. The diagnostic performance of abbreviated protocols with three and four sequences and the full protocol was identical. The two-sequence abbreviated protocol showed higher specificity (84.6%), but a higher probability of false negatives (16.8%) and a lower sensitivity (83.2%) than the other protocols, which showed values of 81.3, 8.4, and 91.6%, respectively. The abbreviated protocol with three sequences showed an average underestimation of only 0.03 cm in the measurement of the longest axis of the residual lesion (p=0.008), but an average reduction in acquisition time of 75%. Conclusion: The three-sequence abbreviated MRI protocol showed diagnostic performance equivalent to the full protocol but with a 75% reduction in acquisition time.

APA, Harvard, Vancouver, ISO, and other styles

5

Bao, Doris, Domenico Luca Carni, Luca DeVito, and Laura Tomaciello. "Session Initiation Protocol Automatic Debugger." In 2007 IEEE Instrumentation & Measurement Technology Conference IMTC 2007. IEEE, 2007. http://dx.doi.org/10.1109/imtc.2007.379335.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Shi, Haowei, Min-Hsiu Hsieh, Saikat Guha, Zheshen Zhang, and Quntao Zhuang. "Entanglement-assisted multiple-access channels: capacity regions and protocol designs." In Quantum Information and Measurement. Washington, D.C.: OSA, 2021. http://dx.doi.org/10.1364/qim.2021.tu3b.5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Raviglione, Francesco, Marco Malinverno, and Claudio Casetti. "A Flexible, Protocol-Agnostic Latency Measurement Platform." In 2019 IEEE 90th Vehicular Technology Conference (VTC2019-Fall). IEEE, 2019. http://dx.doi.org/10.1109/vtcfall.2019.8891076.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Ben Abraham, Hila, and Patrick Crowley. "Performance measurement of the CCNx Synchronization protocol." In 2013 ACM/IEEE Symposium on Architectures for Networking and Communications Systems (ANCS). IEEE, 2013. http://dx.doi.org/10.1109/ancs.2013.6665193.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Silva, Everton Lopes da, Leonardo Coelho Bergantim, Juliano Pallaoro de Souza, and Carlos Roberto Camargo. "FUEL CONSUMPTION MEASUREMENT PROTOCOL FOR DIESEL ENGINES." In XXI Simpósio Internacional de Engenharia Automotiva. Editora Edgard Blücher, 2014. http://dx.doi.org/10.5151/engpro-simea-pap42.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Kocak, Cemal, and Kahraman Zaim. "Performance measurement of IP networks using Two-Way Active Measurement Protocol." In 2017 8th International Conference on Information Technology (ICIT). IEEE, 2017. http://dx.doi.org/10.1109/icitech.2017.8080008.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Measurement protocol"

1

Kurnik, Charles W., Kate M. Stoughton, and Jorge Figueroa. Turf Conversion Measurement and Verification Protocol. Office of Scientific and Technical Information (OSTI), December 2017. http://dx.doi.org/10.2172/1412801.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Kurnik, Charles W., Kate M. Stoughton, and Jorge Figueroa. Turf Conversion Measurement and Verification Protocol. Office of Scientific and Technical Information (OSTI), December 2017. http://dx.doi.org/10.2172/1412802.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Kurnik, Charles W., Kate M. Stoughton, and Jorge Figueroa. Outdoor Irrigation Measurement and Verification Protocol. Office of Scientific and Technical Information (OSTI), December 2017. http://dx.doi.org/10.2172/1412803.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Kurnik, Charles W., Kate M. Stoughton, and Jorge Figueroa. Outdoor Irrigation Measurement and Verification Protocol. Office of Scientific and Technical Information (OSTI), December 2017. http://dx.doi.org/10.2172/1412804.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Mirsky, G., G. Jun, H. Nydell, and R. Foote. Simple Two-Way Active Measurement Protocol. RFC Editor, March 2020. http://dx.doi.org/10.17487/rfc8762.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Shalunov, S., and B. Teitelbaum. One-way Active Measurement Protocol (OWAMP) Requirements. RFC Editor, April 2004. http://dx.doi.org/10.17487/rfc3763.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Shalunov, S., B. Teitelbaum, A. Karp, J. Boote, and M. Zekauskas. A One-way Active Measurement Protocol (OWAMP). RFC Editor, September 2006. http://dx.doi.org/10.17487/rfc4656.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Hedayat, K., R. Krzanowski, A. Morton, K. Yum, and J. Babiarz. A Two-Way Active Measurement Protocol (TWAMP). RFC Editor, October 2008. http://dx.doi.org/10.17487/rfc5357.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Mizrahi, T. UDP Checksum Complement in the One-Way Active Measurement Protocol (OWAMP) and Two-Way Active Measurement Protocol (TWAMP). RFC Editor, March 2016. http://dx.doi.org/10.17487/rfc7820.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Engebrecht-Metzger, Cheryn, and Paul Norton. Building America Indoor Temperature and Humidity Measurement Protocol. Office of Scientific and Technical Information (OSTI), February 2014. http://dx.doi.org/10.2172/1126283.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!