Relevant bibliographies by topics / Materials management Case studies

Academic literature on the topic 'Materials management Case studies'

Author: Grafiati
Published: 10 December 2022
Last updated: 29 January 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Materials management Case studies.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Materials management Case studies"

1

Kasim, Narimah. "ICT Implementation for Materials Management in Construction Projects: Case Studies." Journal of Construction Engineering and Project Management 1, no. 1 (May 27, 2011): 31–36. http://dx.doi.org/10.6106/jcepm.2011.1.1.031.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Barron, Thomas. "Hazardous materials management systems: P2 case studies from Washington State." P2: Pollution Prevention Review 8, no. 4 (September 1998): 57–75. http://dx.doi.org/10.1002/ppr.6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Janisse, Dennis. "Cavovarus Foot: Conservative Management Techniques/Case Studies." Foot & Ankle Orthopaedics 7, no. 1 (January 2022): 2473011421S0026. http://dx.doi.org/10.1177/2473011421s00264.

Full text
Abstract:
Category: Other Introduction/Purpose: The cavovarus foot is a true challenge for both the patient and the surgeon. This complex deformity can be a result of many different causal factors including genetics, Charcot-Marie-Tooth disease, diabetes and spina bifida. It may also be caused or worsened by trauma or surgical procedures. The cavovarus foot is difficult to manage conservatively as it tends to be rigid, is not a good shock absorber and causes the joints of the foot to process abnormal stresses. The mechanical construct of a cavus foot makes it susceptible to a multitude of complications and injuries like inversion ankle sprains and metatarsal stress fractures. Methods: While foot orthoses would likely be the most commonly considered conservative treatment option for the symptomatic cavus foot, other modalities like shoe modification, bespoke and/or therapeutic footwear and bracing have also proven effective. Oftentimes, a combination of the aforementioned options is employed. Given the individual complexities of each cavus foot, the conservative treatment plan is typically custom tailored to fit a particular patient's foot structure, biomechanical and corrective needs, and occupational or recreational demands. A so-called 'cookie cutter' approach is not appropriate for management of the cavovarus foot. Results: A review of published research demonstrates that foot orthoses - and other conservative modalities - are effective in the treatment of the cavus foot. These devices work by correcting the varus foot alignment (when applicable), offloading painful areas such as ball of the foot or the base of the fifth metatarsal, providing shock absorption and replacing lost motion. These applications work together to provide a more normal, safer and energy-efficient gait. Conclusion: Conservative management, specifically pedorthics, is not only a viable treatment option for the cavovarus foot but should be considered integral to the overall management of the cavus foot patient. Pedorthic modalities are successfully used post-operatively or in lieu of surgical intervention. Modern pedorthics (technological advances in shoe and orthotic design, construction and materials) allows for cosmetically pleasing, affordable and comfortable management allowing patients to return to a healthy and active lifestyle in many cases.
APA, Harvard, Vancouver, ISO, and other styles
4

Silva, Angie, Michele Rosano, Laura Stocker, and Leen Gorissen. "From waste to sustainable materials management: Three case studies of the transition journey." Waste Management 61 (March 2017): 547–57. http://dx.doi.org/10.1016/j.wasman.2016.11.038.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Muna, Arinal, Andi Sri Wahyuni, and Ayatulloh Michael Musyaffi. "Financial Literacy of Students: University Case Studies in Indonesia." AKUNSIKA: Jurnal Akuntansi dan Keuangan 3, no. 1 (January 31, 2022): 16. http://dx.doi.org/10.31963/akunsika.v3i1.3417.

Full text
Abstract:
The purpose of this research is to examine student financial literacy in Indonesia. A case study is used as a design method to analyze and explore the financial lives of students at Swadaya Gunung Jati University. By using descriptive statistics, this paper has demonstrated that more than half of students who participate in financial literacy can manage their finances wisely. The present findings have important implications for developing the curriculum in financial management subject in Indonesia, precisely in managing finances for students’ daily life, which ignoring by the majority of financial management courses in Indonesian universities.
APA, Harvard, Vancouver, ISO, and other styles
6

Stechert, Carsten. "Digital and distributed project management in mechanical engineering studies – a case study." Procedia CIRP 100 (2021): 500–505. http://dx.doi.org/10.1016/j.procir.2021.05.110.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Srivastava, Rajiv Ranjan, Dilip Kumar Rajak, Sadia Ilyas, Hyunjung Kim, and Pankaj Pathak. "Challenges, Regulations, and Case Studies on Sustainable Management of Industrial Waste." Minerals 13, no. 1 (December 28, 2022): 51. http://dx.doi.org/10.3390/min13010051.

Full text
Abstract:
Incessant generation and mismanagement of industrial waste, resource scarcity, and environmental degradation have created non-sustainability in human life. Though industrial wastes are hazardous or non-hazardous in nature based on their source, open dumping disposal is commonly done for both types of waste. The adversity associated with waste enhances the environmental and health impacts. However, this waste has the potential to recycle and minimize resource scarcity. The circular economy works on the concept of reuse, recycling, and recovery to convert waste into a resource. Thus, industrial waste can benefit the environment and economic growth to build industrial ecology. However, the opportunities and challenges associated with industrial ecology for the reuse and recycling of waste have to be identified and preserved. Therefore, this study has identified challenges associated with waste, analyzed their impact, and industrial regulations, prioritized their criticality, and developed solution strategies to alleviate them. Two case studies on industrial byproducts, i.e., fly ash and red mud, based on different income groups are discussed in this study. It highlights the circular economy has minimized waste generation and enhanced the recovery of secondary resource materials. In addition, this study supports achieving the sustainable development goals (SDGs) 11 and 12 to build a sustainable industrial ecosystem.
APA, Harvard, Vancouver, ISO, and other styles
8

MUSTAFA, Mairna H. "CASE STUDIES AS A LEARNING METHOD: THE EXAMPLE OF TOURISM CRISIS MANAGEMENT IN JORDAN." Analele Universităţii din Oradea, Seria Geografie 31, no. 2 (December 31, 2021): 89–99. http://dx.doi.org/10.30892/auog.312101-859.

Full text
Abstract:
This paper aims at testing the significance of using case studies as a teaching method for the topic of “Tourism Crisis Management”. The case of Arab Spring influence on Jordanian Tourism was selected for this purpose. A sample of 42 students in a Tourism Management BA Program filled a questionnaire, it focused on measuring knowledge of students about the influence of Arab Spring crisis on both the image of Jordan as a tourism destination, and Jordanian tourism economic indicators, also evaluating the performance of tourism stakeholders in the time of crisis. By conducting a paired t-test for responses before and after presenting the case study to students by the instructor, significant statistical differences were found for most of the measured variables, which supports the importance of case studies in making students more aware of political crises’ effect on tourism levels, and how to reduce their influences and retrieve the positive image of destinations.
APA, Harvard, Vancouver, ISO, and other styles
9

Morais, Flávia P., and Joana M. R. Curto. "“3D computational simulation and experimental validation of structured materials: Case studies of tissue papers." BioResources 17, no. 3 (May 23, 2022): 4206–25. http://dx.doi.org/10.15376/biores.17.3.4206-4225.

Full text
Abstract:
The development and optimization of structured materials, such as tissue paper materials, benefit from modeling strategies that take into consideration its structural hierarchy at the fiber and the paper levels. The use of an innovative three-dimensional voxel approach to model both the fiber and the 3D paper structure were validated by comparison of the computational structures with the laboratory-made structures. The main goal of this work was to model tissue structures and obtain a computational implementation adapted for tissue products. The fibers were modeled in 3D according to their dimensions, and the structures produced by them were characterized using the Representative Elementary Volume (REV) and image analysis computational tools. This methodology made it possible to model the fibers according to their morphology, flexibility, and collapse, resulting in a tissue structure with thickness, porosity, relative bonding area, coverage, among other properties. The experimental design plan included the production and characterization of isotropic laboratory structures with basis weights of 20, 40, and 60 g/m2 with different eucalyptus fibers and beating degrees. With the aid of these advanced computational tools, mathematic models with predictive capacity for tissue properties such as softness, strength, and absorption can be developed.
APA, Harvard, Vancouver, ISO, and other styles
10

王玉珍, 王玉珍, Liang-Yi Tsai Yu-Chen Wang, Yen-Wen Huang Liang-Yi Tsai, Wan-Chun Wen Yen-Wen Huang, and Yi-June Lo Wan-Chun Wen. "Management of External Cervical Resorption in Mandibular Molar Furcation Area - A Case Series." Journal of Periodontics and Implant Dentistry 5, no. 1 (April 2022): 029–37. http://dx.doi.org/10.53106/261634032022040501004.

Full text
Abstract:
<p>External cervical resorption (ECR) is an aggressive form of root resorption causing loss of tooth structure and sometimes leading to destruction of adjacent alveolar bone. In the advanced extent of ECR lesion, surgical intervention is inevitable. Several studies presented favorable treatment outcomes on advanced ECR lesions at single teeth. In the light of these studies, this article reports on surgical management of two ECR cases. Materials and Methods: Two cases had ECR combined with bony defect in left mandibular first molar. Case 1 had ECR lesion over buccal furcation area combined with buccal bone plate loss. Following root canal treatment, the resorptive defect was restored by mineral trioxide aggregate and the bony defect was treated with guided tissue regeneration (GTR). Case 2 had class II furcation defect with ECR over furcal surfaces of mesial and distal roots. The resorptive defect was restored with bioceramic putty and class II furcation bony defect was treated by GTR. Root canal treatment of tooth 36 was done later after case 2 suffered from symptomatic irreversible pulpitis of tooth 36. Result: At one-year follow-up of case 1, no inflammatory signs with probing pocket depth (PPD) less than 3mm clinically and regeneration of buccal bone plate radiographically were found of tooth 36. At half year follow-up of case 2, there was a healthy gingiva with PPD less than 3mm clinically and the furcation area has been partially filled with regenerated bone radiographically of tooth 36. Conclusion: These case series presented an interdisciplinary surgical management of two cases with external cervical resorption combined with bony defect over lower molar furcation area which were successfully treated with biocompatible restorative material in combination with GTR technique in short-term follow-up.</p> <p>&nbsp;</p>
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Materials management Case studies"

1

Kottakis, Ioannis A. "Public and private sector advanced materials strategies in the late 1990s as illustrated by the case of advanced metals and ceramics in Greece." Thesis, City University London, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.300698.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

El, Mouallem Lara. "How might partner selection be improved by corporates to address material sustainability issues? : a case study of Northumbrian Water Ltd." Thesis, Northumbria University, 2017. http://nrl.northumbria.ac.uk/36281/.

Full text
Abstract:
This research explores how Northumbrian Water Ltd. (NWL), a UK private sector organization providing water supply and sewerage services, selects nonprofit organization (NPO) partners who contribute to addressing its material sustainability issues. The aim of this research is to provide a framework of partner selection for NWL and other businesses in the water industry who seek to address material sustainability issues through cross-sector (NPO-business) partnerships. There is limited research on how businesses should select NPO partners from an impact or value creation perspective. Moreover, systematc models of materiality analysis are rarely found in the literature. THE GRI is providing guidance on materiality analysis through practice-based standards, but systematic research into organizational practices is limited. NWL engages in a variety of strategic key partnerships which make it a suitable choice of case study for investigating the partner selection process. The study particularly examines how partnerships can generate impact on material sustainability issues, and how this prospective impact can be evaluated. Template analysis is used to interpret transcripts of semi-structured interviews and a focus group involving key informants from NWL and its NPO partners. The contribution to knowledge is established around the need for having both flexible/reactive/project-based and systematic/proactive/strategic approaches to partner selection while ensuring shared value co-creation. The study further highlights how materiality with respect to sustainability issues can be assessed both reactively and proactively from NWL's perspective, and how this assessment can better inform the partner selection process. Future research avenues can involve investigating the applicability of the partner selection framework resulting from this study to other businesses in the water industry.
APA, Harvard, Vancouver, ISO, and other styles
3

Niutanen, Ville. "Industrial ecosystem case studies : the potential of material and energy flow roundput in regional waste management /." Joensuu : Joensuun yliopisto, 2005. http://www.loc.gov/catdir/toc/fy0608/2005390556.html.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Assiamah, Albert Kofi, Daniel Allotey, and Prince Kofi Hanson. "MATERIALS MANAGEMENT AND ITS EFFECTS ON COST OF SUPPLIES : MATERIALS MANAGEMENT." Thesis, Mälardalen University, School of Sustainable Development of Society and Technology, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-795.

Full text
Abstract:

Date: 2008-06-05

Course: Master Thesis in Business Administration, 15 ECTS credits. EF0704

Authors: Albert Kofi Assiamah Daniel Allotey Prince Kofi Hanson

Supervisor: Sigvard Herber

Title: Materials Management and its Effect on Cost of Supplies

Background: In most organizations within the country (Ghana), materials management has

been relegated to the background without any proper control. This means

that companies are investing heavily in materials than is necessary.

Problem: How can materials management minimize the cost of supplies in

Cocoa Processing Company of Ghana?

Purpose: The aim of this research is to illustrate how the application of

materials management concept can minimize the cost of supplies in Cocoa

Processing Company of Ghana.

Methods: With regards to primary data, interviews (face-to-face, telephone) and questionnaire

were used. Secondary data has been sourced through literature from the university

library and internet sources, qualitative design method was chosen over others

because of the nature of the research work.

Conclusion: Financially, materials (inventories) are very important to manufacturing companies and on the balance sheet they usually represent from twenty to sixty percent of total

assets. Therefore, if the application of the concept of materials management is accepted with well qualified personnel, it could lead to the minimization of cost. The function of a materials manager is to promote coordination and integration within the supply chain and the major benefits are assumed to be; reduction in interdepartmental conflicts, reduction of inventory levels, increased knowledge of total corporate operations and reduction of materials handling costs among others.

APA, Harvard, Vancouver, ISO, and other styles
5

Oh, Shih-Hao Steven 1977. "Case studies in project management." Thesis, Massachusetts Institute of Technology, 1999. http://hdl.handle.net/1721.1/80170.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Fijor, Thiago Frederic Albert. "O controle patrimonial como ferramenta de governança pública: o caso da Universidade Tecnológica Federal do Paraná." Universidade Tecnológica Federal do Paraná, 2014. http://repositorio.utfpr.edu.br/jspui/handle/1/1002.

Full text
Abstract:
O objetivo geral deste estudo é analisar o controle patrimonial dos bens permanentes da UTFPR, em seus 13 campi, como uma ferramenta de Governança Pública. Como objetivos específicos, buscou-se: compreender os princípios da Administração Pública e os princípios da Governança Pública; descrever os procedimentos, as tecnologias e os recursos empregados no controle patrimonial da UTFPR; verificar o atendimento dos princípios da Governança Pública pelo controle patrimonial da UTFPR; e, por fim, propor soluções para o aperfeiçoamento da atividade de controle patrimonial na UTFPR com base nos princípios da prestação de contas e transparência da Governança Pública. Por serem destinados ao atendimento de um interesse coletivo, os recursos públicos devem ser administrados de forma a maximizar os benefícios à coletividade, observando os princípios da legalidade, impessoalidade, moralidade, publicidade e eficiência. Para que os atos administrativos não se afastem de tal liame foram instituídos os mecanismos de controle interno e externo. O controle patrimonial é um tipo de controle interno que permite a manutenção de informações atualizadas acerca dos bens públicos permanentes, tais como, as informações sobre a aquisição, responsável pela carga patrimonial e os registros de baixa patrimonial. Para o atendimento dos objetivos do estudo optou-se pela realização de uma pesquisa qualitativa, mediante a técnica do estudo de caso. Foram identificados 21 servidores responsáveis pelo controle patrimonial atuantes nos 13 campi da UTFPR. Ainda foram identificados três servidores que contribuem com a atividade de controle patrimonial. Foram empregados questionários, análise documental e a análise de artefatos tecnológicos. Como método de exame dos materiais coletados utilizou-se a análise de conteúdo. Ficou demonstrado que o controle patrimonial de bens permanentes da UTFPR não é, atualmente, uma ferramenta de Governança Pública, tendo em vista a inexistência de transparência no que tange ao controle patrimonial. Da mesma forma, o atendimento ao princípio da prestação de contas encontra-se prejudicado, pois não são disponibilizados dados analíticos acerca dos bens que compõem o patrimônio da UTFPR. Por outro lado, as informações disponibilizadas de maneira sintética nos relatórios de gestão não encontram lastro com a realidade, tendo em vista que os inventários patrimoniais não são realizados em alguns campi. Como forma de superar tais desafios propõe-se a realização de treinamentos, a elaboração de normas acerca do controle patrimonial, o estudo da possibilidade da adoção de novas tecnologias e a realização efetiva dos inventários nos campi.
The overall objective of this study is to analyze asset tracking of permanent property belonging to UTFPR, in all of its 13 campuses, as an Public Governance tool. The specific objectives were: to understand the principles of Public Administration and principles of Public Governance; describe the procedures, technologies and resources employed in asset tracking at UTFPR; attest that the principles of Public Governance through asset tracking at UTFPR have been observed; and lastly, propose solutions to improve the activity of asset tracking at UTFPR based on the principles of accountability and transparency of Public Governance. Because they are intended to meet a collective interest, public resources must be administered so as to maximize the benefits to the collectivity, abiding by the principles of legality, impersonality, morality, disclosure and efficiency. Internal and external control mechanisms have been implemented to prevent administrative acts from straying from this ideal. Asset tracking is a type of internal control that makes it possible to maintain updated information on permanent public assets, such as information on acquisition, asset record keeping and records on asset write-offs. To meet the objectives of the study, it was decided upon the qualitative research study method using the case study technique. A total of 21 servants were identified as responsible for asset tracking at the 13 UTFPR campuses. Another three servants were identified as contributing to the activity of asset tracking. The study used surveys, documental analysis, and analysis of technological devices. Content analysis was used as the method to examine collected materials. It was demonstrated that permanent asset tracking at UTFPR is currently not an efficient tool of Public Governance, considering the non-existence of transparency with regard to asset tracking. Likewise, the fulfillment of the principle of compliance has been compromised, as analytical data are not provided regarding the goods that comprise the assets of UTFPR. Moreover, the information provided in shortened format in management reports does not reflect reality, considering that inventories are not carried out in some campuses. In order to overcome these challenges, proposals include training, creation of norms regarding asset tracking, studies on the possibility of adopting new technologies, and effectively performing inventories in the campuses.
APA, Harvard, Vancouver, ISO, and other styles
7

Drury, Peter. "Information management and intelligence : NHS case studies." Thesis, University of Surrey, 1990. http://epubs.surrey.ac.uk/843534/.

Full text
Abstract:
As a contribution to the social theory of organisations, this thesis develops a comprehensive conceptual framework for the analysis of "organisational intelligence". It is developed in the context of some of the empirical problems of information management in the NHS. The framework is based on an information processing perspective. It has a number of components, each of which may be used, individually or collectively by information and social analysts. Organisational intelligence is, therefore, a relative concept, being concerned in essence with assessments of contextually appropriate behaviour and/or information. Organisational intelligence focuses on and reflects how actors / organisations do knowledgework. A number of generic knowledgework processes are proposed, together with some associated pathologies. But the question for information management is how to develop the supporting knowledgebase component. The development of information products of, or for, intelligence is another component of the framework. All these processes and products need to be assessed in their historical, political and information-related contexts. Finally, attention is paid to assessments in the light of experience of the issues in question. The case studies are based on material gathered firstly while working as a District Information Officer in a Health Authority, and then as co-ordinator for the project determining the information requirements of the NHS after the 1991. These studies are supplemented by analyses of secondary material. After a series of case studies using the organisational intelligence framework to illustrate different aspects of the information management in the NHS during the 198 0s, there are two detailed local studies, and then one concerning national developments in information policy in the early 1980s, followed by an analysis of the information requirements of the NHS post-Review. Finally, the case study material is drawn together to illustrate some characteristics of the organisation of intelligence.
APA, Harvard, Vancouver, ISO, and other styles
8

The'berge, Marc W. "Three case studies of management information systems." Thesis, Monterey, California : Naval Postgraduate School, 1990. http://handle.dtic.mil/100.2/ADA238310.

Full text
Abstract:
Thesis (M.S. in Information Systems)--Naval Postgraduate School, September 1990.
Thesis Advisor(s): Haga, William J. Second Reader: Zviran, Moshe. "September 1990." Description based on title screen as viewed on December 21, 2009. DTIC Identifier(s): Management Information Systems, Naval Operations, Data Bases, Instructional Materials, Decision Aids, Aviation Accidents, Antisubmarine Warfare, Naval Training, Local Area Networks, Theses. Author(s) subject terms: Case Studies, Database Management Systems, Local Area Networks, Decision Support. Includes bibliographical references. Also available in print.
APA, Harvard, Vancouver, ISO, and other styles
9

Bisulca, Christina. "Case Studies in Conservation Science." Diss., The University of Arizona, 2014. http://hdl.handle.net/10150/332904.

Full text
Abstract:
The research presented in this dissertation covers three separate topics of conservation as defined by the National Science Foundation: 1) Materials Stabilization, Strengthening, Monitoring, and Repair; 2. Understanding Material Degradation and Aging; and 3) Materials and Structural Characterization of Cultural Heritage Objects (the `technical study'). The first topic is addressed through a study to assess the consolidant tetraethoxysilane for the stabilization of alum treated wood. Falling under materials degradation studies is a study published in American Museum Novitates to understand how environmental conditions affect the aging of fossil resins from five different deposits. Two separate studies are included in technical study of cultural heritage objects which comprises the third research area of materials characterization. The first is a survey of red dyes used in Chinese paintings from the Ming Dynasty to the Early Republic (1364-1911). The second is a study of the pigments, dyes and binders used in Hawaiian barkcloth (kapa) from the 19th century.
APA, Harvard, Vancouver, ISO, and other styles
10

McCracken, Janet Rae. "Phenomenographic instructional design : case studies in geological mapping and materials science." Thesis, Open University, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.270015.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Materials management Case studies"

1

Arnold, J. R. Tony. Introduction to materials management casebook. 2nd ed. Upper Saddle River, NJ: Pearson Prentice Hall, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Mwikisa, Chris Ngenda. Materials management in developing countries: Case study of Zambia. [Mannheim]: Universität Mannheim, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Arnold, Maltz, Center for Advanced Purchasing Studies (Tempe, Ariz.), and National Association of Purchasing Management., eds. Outsourcing: Implications for supply management. Tempe, AZ: Center for Advanced Purchasing Studies, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Leenders, Michiel R. Major changes in supply chain responsibilities. Tempe, AZ: CAPS Research, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Flatten, Ulrich. Controlling in der Materialwirtschaft: Eine explorative Studie in der deutschen Automobilindustrie. Bergisch Gladbach: J. Eul, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Helen, Lindsay, and Library and Information Commission, eds. Benchmarks in collections care for UK libraries. [London]: Library and Information Commission, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Bell, Nancy. Benchmarks in collections care for UK libraries. [London]: Library and Information Commission, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Niutanen, Ville. Industrial ecosystem case studies: The potential of material and energy flow roundput in regional waste management. Joensuu: Joensuun yliopisto, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Philip, Kaminsky, and Simchi-Levi Edith, eds. Designing and managing the supply chain: Concepts, strategies, and case studies. 2nd ed. Boston: McGraw-Hill/Irwin, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Philip, Kaminsky, and Simchi-Levi Edith, eds. Designing and managing the supply chain: Concepts, strategies, and case studies. 3rd ed. Boston, Mass: McGraw-Hill/Irwin, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Materials management Case studies"

1

Juware, R., and G. Mirashi-Shirsath. "CAN-PACK Material Recovery Facility—A Case for Integrating Informal Recyclers." In Sustainable Waste Management: Policies and Case Studies, 333–46. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-7071-7_30.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Sala, Dariusz, and Bogusław Bieda. "Role of Stochastic Approach Applied to Life Cycle Inventory (LCI) of Rare Earth Elements (REEs) from Secondary Sources Case Studies." In Towards a Sustainable Future - Life Cycle Management, 107–20. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-77127-0_10.

Full text
Abstract:
AbstractMonte Carlo (MC) simulation using Crystal Ball® (CB) software is applied to life cycle inventory (LCI) modelling under uncertainty. Input data for all cases comes from the ENVIREE (ENVIronmentally friendly and efficient methods for extraction of Rare Earth Elements), i.e. from secondary sources eco-innovative project within the second ERA-NET ERA-MIN Joint Call Sustainable Supply of Raw Materials in Europe 2014. Case studies described the flotation tailings from the New Kankberg (Sweden) old gold mine and Covas (Portugal) old tungsten mine sent to re-processing/beneficiation for rare earth element (REE) recovery. In this study, we conduct the MC analysis using the CB software, which is associated with Microsoft® Excel spreadsheet model, used in order to assess uncertainty concerning cerium (Ce), lanthanum (La), neodymium (Nd) and tungsten (W) taken from Covas flotation tailings, as well as Ce, La and Nd taken from New Kankberg flotation tailings, respectively. For the current study, lognormal distribution has been assigned to La, Ce, Nd and W. In the case of Covas, the weights of each selected Ce, La, Nd and W are 32 ppm, 16 ppm, 15 ppm and 1900 ppm, respectively, whereas in the case of New Kankberg, the weights of each selected Ce, La and Nd are 170 ppm, 90 ppm and 70 ppm, respectively. For the presented case, lognormal distribution has been assigned to Ce, La, Nd and W. The results obtained from the CB, after 10,000 runs, are presented in the form of frequency charts and summary statistics. Thanks to uncertainty analysis, a final result is obtained in the form of value range. The results of this study based on the real data, and obtained using MC simulation, are more reliable than those obtained from the deterministic approach, and they have the advantage that no normality is presumed.
APA, Harvard, Vancouver, ISO, and other styles
3

Oliveira, Luís Miguel, Sílvia Esteves, António Francisco Tenreiro, João Rui Matos, João Sobral, and João P. T. Pereira. "Case Studies." In Advanced Structured Materials, 297–309. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-44522-5_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Park, Alan. "Case Studies." In Facilities Management, 163–71. London: Macmillan Education UK, 1998. http://dx.doi.org/10.1007/978-1-349-14879-0_14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Heesen, Bernd. "Case Studies." In Management for Professionals, 137–211. Berlin, Heidelberg: Springer Berlin Heidelberg, 2016. http://dx.doi.org/10.1007/978-3-662-47923-0_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Burchill, Frank, and Alice Casey. "Case Studies." In Human Resource Management, 157–70. London: Macmillan Education UK, 1996. http://dx.doi.org/10.1007/978-1-349-24806-3_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Gutsatz, Michel, and Gilles Auguste. "Case studies." In Luxury talent management, 113–30. London: Palgrave Macmillan UK, 2013. http://dx.doi.org/10.1057/9781137270672_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Heesen, Bernd. "Case Studies." In Management for Professionals, 127–204. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-19205-0_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Yamazaki, Katsuo. "Case studies." In Japanese Global Management, 7–148. London: Palgrave Macmillan UK, 2012. http://dx.doi.org/10.1057/9780230367111_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Oakland, John S., and Marton Marosszeky. "Case studies." In Total Construction Management, 449–51. Abingdon, Oxon ; New York, NY : Routledge is an imprint of the: Routledge, 2017. http://dx.doi.org/10.4324/9781315694351-20.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Materials management Case studies"

1

Blommaert, W., K. Mannaerts, S. Pepin, and B. Dehandschutter. "Application of an Environmental Remediation Methodology: Theory vs. Practice—Reflections and Two Belgian Case Studies." In ASME 2011 14th International Conference on Environmental Remediation and Radioactive Waste Management. ASMEDC, 2011. http://dx.doi.org/10.1115/icem2011-59184.

Full text
Abstract:
Like in many countries, polluted industrial sites also exist in Belgium. Although the contamination is purely chemical in most cases, they may also contain a radioactive component. For chemically contaminated sites, extensive regulations and methodologies were already developed and applied by the different regional authorities. However and essentially because radioactivity is a federal competence, there was also a necessity for developing a legal federal framework (including an ER-methodology [1]) for remediation of radioactive contaminated sites. Most of the so-called radioactive contaminated sites are exhibiting a mixed contamination (chemical and radiological), and hence the development of such methodology had to be in line with the existing (regional) ones concerning chemical contamination. Each authority having their own responsibilities with regard to the type of contamination, this makes it more complicated and time-consuming finding the best solution satisfying all involved parties. To overcome these difficulties the legal framework and methodology — including the necessary involvement of the stakeholders and delineation of each party’s responsibilities — has to be transparent, clear and unambiguous. Once the methodology is developed as such and approved, the application of it is expected to be more or less easy, logic and straightforward. But is this really true? The aim of this document is to investigate as well the impact of factors such as the type of radioactive contamination — levels of contamination, related to NORM activity or not, homogeneous or heterogeneous, the differences in licensing procedures,… — on the application of the developed methodology and what could be the consequences in the long run on the remediation process. Two existing case studies in Belgium will be presented ([2]). The first case deals with a historical radium contaminated site, the second one with a phosphate processing facility still in operation, both with (very) low levels of radioactivity but containing very large volumes of contaminated materials. These case studies will demonstrate that, although the applied methodology will be the same in both cases, the impact of e.g. sampling strategy, scenario definitions, modelisations, final destination of the land, presence of chemotoxic components, dose or risk assessments, uncertainties, derivation of clean-up radionuclide guidelines, stakeholder involvement and waste treatment could be important on licensing, cost-estimate, planning and final outcome of the environmental remediation activities to be executed.
APA, Harvard, Vancouver, ISO, and other styles
2

Nagy, Diána. "Possibilities of Digitalization and Service Design in the Development of Patient Adherence." In New Horizons in Business and Management Studies. Conference Proceedings. Corvinus University of Budapest, 2021. http://dx.doi.org/10.14267/978-963-503-867-1_05.

Full text
Abstract:
In parallel with the development of modern health systems and the growth of the welfare state, diseases have shifted towards chronic diseases. Today, instead of rapid-onset infections, most resources are focused on the long-term treatment of mostly lifelong chronic conditions. The condition for the effective use of therapies is to take the specified dose with the prescribed frequency and for the required period of time. If these parameters are met, we can talk about patient collaboration or adherence. For certain diseases and treatments, adherence is critically low. In the case of complex preparations to be taken several times a day, or diseases that do not cause serious, noticeable complaints, the initial number of patients treated is reduced to a fraction within a short time. As a result, economic harm is perceived not only by the patient but also by all those involved in the health care system, including pharmaceutical companies. However, the factors influencing patient collaboration vary widely. In order to achieve high adherence, the goal is to develop health services that coordinate the actors involved, the infrastructure, the communication, the material components to improve the user experience. As a user-centered methodology, service design can play a prominent role in the design of therapeutic services, contributing to the reduction of uncertainties in innovation processes. In my study, I assess the digital toolkit of patient education in Hungarian society. The aim is to explore digital tools and technologies that can contribute to the development of health awareness and education so that both science and the pharmaceutical and technology companies that exploit it can apply the results of research.
APA, Harvard, Vancouver, ISO, and other styles
3

Ustinovičius, Leonas, Tatjana Vilutienė, Arūnas Barvidas, and Arūnas Puzinas. "Perceptions of Construction Industry to Managerial Competences in Construction: Lithuanian Case." In Contemporary Issues in Business, Management and Education. VGTU Technika, 2015. http://dx.doi.org/10.3846/cibme.2015.11.

Full text
Abstract:
The article presents the results of study conducted during the MBAIC project. The main task of the project was to deepen Directive’s 89/48/EWG ideas, which will lead to creation of proper European system of comparison, certification and mutual recognition of managerial qualifications in construction. During the project, the survey on managerial competences in construction was conducted. The project resulted with new postgraduate studies for construction managers were created forming common platform of managerial knowledge. The scope of knowledge included in didactic material was agreed with representatives of European construction industry. This base of knowledge will extend the foundations of recognition and certification of managerial qualifications in construction, in EU.
APA, Harvard, Vancouver, ISO, and other styles
4

Srinivasan, Anand, Asli Sahin, Janis P. Terpenny, Timothy W. Simpson, Soundar R. T. Kumara, Steven B. Shooter, and Robert B. Stone. "Online Case Studies and a Process Description for Product Platform Planning." In ASME 2005 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2005. http://dx.doi.org/10.1115/detc2005-85338.

Full text
Abstract:
Product Platform Planning is an emerging philosophy that calls for the planned development and deployment of families of related products. It is markedly different from the traditional product development process, which focuses on optimized designs for individual products. This is a relatively new development in engineering design, which is not typically a part of an engineer’s education. Furthermore, it is different from traditional engineering topics in that it requires an integration of principles from both management and engineering design. All this makes for a new and different topic for which educational material needs to be developed. To address these needs, an online resource has been developed. This resource includes a set of three cases, a tutorial, and a glossary in a multimedia format hosted on the Internet. The tutorial developed for the website presents the basic concepts as well as current research on planning and architecting families of products. The case study section has three cases based on a family of popular power tools. The cases present information in the form of function diagrams, assembly diagrams, customer needs and market-segment data. Links are provided to helpful sites, as well as to relevant sections in the tutorial. Although product platform planning is a relatively new development, a variety of approaches have been used by the research community and practitioners in industry. A need was felt for a comprehensive, coherent source of knowledge in this field on which to base the case studies, and also as a means to providing a single source of information to users of this resource. Accordingly, a literature review was conducted and an overall process description was developed. This paper presents and describes the online learning resource which was developed. In addition, the literature review and the process description of platform planning that were developed are also detailed.
APA, Harvard, Vancouver, ISO, and other styles
5

Naime, Eduardo, Ana Paula Afonso, and Márcia Vieira. "REFLECTIONS ON DISTANCE EDUCATION MANAGEMENT IN BRAZIL: CASE STUDIES ON THE DEVELOPMENT OF DIDACTIC MATERIAL IN DISTANCE EDUCATION IN CORPORATE UNIVERSITIES." In 15th annual International Conference of Education, Research and Innovation. IATED, 2022. http://dx.doi.org/10.21125/iceri.2022.0953.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Chadha, Bipin, R. E. Fulton, and J. C. Calhoun. "Case Study Approach for Information-Integration of Material Handling." In ASME 1991 International Computers in Engineering Conference and Exposition. American Society of Mechanical Engineers, 1991. http://dx.doi.org/10.1115/edm1991-0178.

Full text
Abstract:
Abstract Information-Integration is vital for keeping manufacturing operations competitive. A case study approach has been adopted to better understand the role of information in integrated manufacturing. Information is now considered a corporate asset. Creation, processing, movement, and security of information is therefore as important as that of the products/services of an enterprise. The case studies have helped in identifying the issues involved in developing an information system and supporting software framework for a manufacturing enterprise. The case studies have helped in refining an integration model, and identifying the characteristics desirable in modeling methodologies and tools. This paper describes a case study dealing with integrated manufacture of optical fiber products. A phased development and implementation approach was adopted where a small, manageable slice of the system is considered for the case study followed by functional modeling (IDEF0) and data flow modeling (Data Flow Diagrams). This identifies the pieces of information of interest. The information relationships are modeled using Extended Entity Relationship (EER) diagrams which are then mapped on to a relational model. The relational tables thus obtained were implemented on a commercial Database Management System. The functional constraints and application interfaces were then built using SQL and commercial application interface tools. The sections in the paper describe the functional models, data flow diagrams, EER diagrams, relational database design, and user/application interfaces developed for the system. Implementation experiences and observations are discussed followed by plans for the next phase of the system.
APA, Harvard, Vancouver, ISO, and other styles
7

Ali, Wajid, Faisal Abdullah Al-Turki, Athman Abbas, and Mohammed Alalhareth. "Application of Innovative Resin System to Improve Wellbore Integrity: Case Studies from Saudi Arabia." In SPE Asia Pacific Oil & Gas Conference and Exhibition. SPE, 2022. http://dx.doi.org/10.2118/210620-ms.

Full text
Abstract:
Abstract A significant challenge occasionally faced during the well's lifecycle is the pressure buildup between the cemented annuli, also known as sustained casing pressure (SCP). The presence of SCP indicates a path of flow of formation fluids to the surface. Compromise of cement sheath integrity is one of the primary reasons for such a pressure buildup. This challenge prompted the development of such an isolation material that should enhance the mechanical properties of cement to prevent the SCP. In parallel, another isolation material was required to remediate the wells suffering from SCP. After some research, a specialized resin system was developed that could be deployed to prevent and eliminate the SCP in the situations mentioned above. This paper presents the lab testing and application of the innovative resin system. This system can be used as a standalone product and blended with cement, depending upon the nature of the application and zonal isolation objective. While using the resin as a standalone product, its solids-free nature and low yield point enable it to flow freely into micron-sized leaks or channels. Pure resin is mainly used for remedial applications. When the resin is added to the cement during primary cementing operations, it forms a dense and highly cross-linked matrix with improved mechanical properties that helps to provide a dependable barrier to maintain long-term zonal isolation. Engineered solutions ultimately deliver the optimal asset value of the reservoir. During the last few decades, several laboratory investigations and field studies have been conducted to find answers to the problem of SCP, which appears after primary or remedial cement jobs. Almost all these studies unanimously conclude that conventional cement does not always endure the mechanical stresses imposed by the wellbore conditions, and it often falls short in providing permanent isolation beyond the well's production life. This paper illustrates two case studies to validate this. The first case study is related to primary cementing, where the resin-cement blend was successfully utilized to prevent the expected high-pressure influx across a water-bearing formation. The resin-cement system was designed to be placed as a tail slurry to provide enhanced mechanical properties compared to a conventional slurry. The combined mixture of resin and cement slurry provided the desired product's necessary properties. The cement treatment was performed as designed and met all zonal isolation objectives. The second case study relates to remedial cementing, where the resin system was utilized to remediate the three annuli on an offshore oil well. Reliable and effective annular barriers are critical to well management for safety and performance. Conventional Cement slurries have been the industry's typical means of creating these barriers. However, the cement alone is inadequate to meet the industry needs; hence, combined solutions deliver improved well integrity.
APA, Harvard, Vancouver, ISO, and other styles
8

Дарья, Семенова. "DIGITAL TRANSFORMATION OF PROJECT MANAGEMENT: EXPERIENCE OF STATE AND MUNICIPAL ADMINISTRATION OF THE RUSSIAN FEDERATION." In MODERN CITY: POWER, GOVERNANCE, ECONOMICS. Publishing House of Perm National Research Polytechnic University, 2020. http://dx.doi.org/10.15593/65.049-66/2020.8.

Full text
Abstract:
The article is devoted to the practical experience of digital transformation of project management. The study was carried out on the basis of regulatory legal acts and materials from the official websites of a number of regions of the Russian Federation. The main research methods are case-studies, a comparative analysis of the experience of regions, interviews with representatives of project offices in the regions. A comparative analysis of the regions was carried out according to the main indicators of the digital transformation of project management. The study identified the current results of digital transformation and developed recommendations for improving the process.
APA, Harvard, Vancouver, ISO, and other styles
9

Stamps, Tyler, and David Huitink. "Transient Performance and Melt Front Characterization of Phase Change Materials." In ASME 2021 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/ipack2021-73252.

Full text
Abstract:
Abstract Thermal management systems are often over-designed for average use in order to handle spikes in heat generation, which increases the spatial and financial requirements. One way to mitigate this is via the use of phase change materials (PCMs) as thermal buffers and storage media. This paper examines the melt front behavior of a common solid to liquid PCM, paraffin, experimentally and numerically. A 16 cm3 fully enclosed melting chamber was designed and constructed to observe the melt behavior via IR imaging. The chamber applies a constant temperature heat flux to one end of the sample and a constant temperature cold boundary on the other. ARL ParaPower was used for the numerical simulation. This tool models the convection in liquid PCM as an effective thermal conductivity parameter. The MATLAB-based program offers faster computation times than high fidelity commercial FEA tools. The experimental and numerical data are then compared via a custom MATLAB script which identifies the melt front and outputs the position and velocity over time for each test case. It was concluded that ParaPower adequately depicts the melt front behavior under this set of experimental conditions. This work enables future studies using the IR-transparent melt chamber designed herein.
APA, Harvard, Vancouver, ISO, and other styles
10

Tilley, Richard, and Robin Dyle. "Building the Technical Case for Long-Term Operation." In ASME 2015 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/pvp2015-45617.

Full text
Abstract:
United States (US) and International utilities are actively engaged in assessing the economic and societal benefits of operating nuclear plants beyond their initial license periods. Nuclear plant generated electricity is still the largest contributor to non-carbon dioxide emitting generation. In the US, a majority of operating plants has already received approval for an additional 20 years of operation, and soon it is expected that utilities will begin the process to seek a second 20 year renewal. The keys to successful renewal are to maintain safe and reliable operations by building a sound technical case through the following activities: • Develop comprehensive understanding of aging degradation issues for systems, structures and components (SSCs) • Implement specific plant aging management programs to address aging degradation • Confirm behavior of degradation mechanisms for the entire period of operation This paper will step through the above elements to illustrate how a strong technical case may be created for safe and reliable long-term operation. Examples or case studies will be provided to clearly link the fundamental science of materials degradation to the inspection, testing and evaluation efforts implemented at a plant and to the confirmatory data that is provided by both actual operating experience and the extensive research and development projects pursued by industry, governments, and the academic community.
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Materials management Case studies"

1

Avis, William. Technical Aspects of e-Waste Management. Institute of Development Studies, March 2022. http://dx.doi.org/10.19088/k4d.2022.051.

Full text
Abstract:
Population growth, increasing prosperity and changing consumer habits globally are increasing demand for consumer electronics. Further to this, rapid changes in technology, falling prices, increased affordability and consumer appetite for new products have exacerbated e-waste management challenges and seen millions of tons of electronic devices become obsolete. This rapid literature review collates evidence from academic, policy focussed and grey literature on the technical aspects e-waste value chains. The report should be read in conjunction with two earlier reports on e-waste management1. E-waste is any electrical or electronic equipment, including all components, subassemblies and consumables, which are part of the equipment at the time the equipment becomes waste. The exact treatment of Waste from Electrical and Electronic Equipment (WEEE) can vary enormously according to the category of WEEE and technology that is used. Electrical and electronic items contain a wide variety of materials. As a result of this complex mix of product types and materials, some of which are hazardous (including arsenic, cadmium, lead and mercury and certain flame retardants) multiple approaches to WEEE are required, each with specific technical guidelines. This report is structured as follows: Section two provides an introduction to the technical aspects of e-waste management, including a reflection on the challenges and complexities of managing a range of product types involving a range of components and pollutants. Section three provides an annotated bibliography of key readings that discuss elements of the technical aspects of managing e-waste. This bibliography includes readings on national guidelines, training manuals and technical notes produced by the Basel convention and courses. WEEE recycling can be a complex and multifaced process. In order to manage e-waste effectively, the following must be in place Legislative and regulatory frameworks Waste Prevention and minimisation guidelines Identification of waste mechanisms Sampling, analysis and monitoring expertise Handling, collection, packaging, labelling, transportation and storage guidelines Environmentally sound disposal guidelines Management is further complicated by the speed of technological advance with technologies becoming redundant much sooner than initially planned. Case studies show that the average actual lifetimes of certain electronic products are at least 2.3 years shorter than either their designed or desired lifetimes.
APA, Harvard, Vancouver, ISO, and other styles
2

Moore, David, Damarys Acevedo-Acevedo, and Philip Gidley. Application of clean dredged material to facilitate contaminated sediment source control. Engineer Research and Development Center (U.S.), September 2022. http://dx.doi.org/10.21079/11681/45342.

Full text
Abstract:
Navigation channels, turning basins, and other US Army Corps of Engineers (USACE)–managed navigation infrastructure often serve as repositories for contaminated sediment from off-site sources. As much as 10% of the material that USACE dredges on an annual basis is contaminated such that it requires additional and more costly management (for example, rehandling and placement in managed confined disposal facilities). Presence of contaminated sediments constrain potential management options resulting in additional costs and opportunity loss from the inability to beneficially use the material. One potential solution is applying clean dredged material to stabilize and isolate contaminated sediment sources, preventing further transport and introduction to USACE-managed infrastructure. This document summarizes a comprehensive literature review of laboratory and field case studies relevant to using clean dredged material to isolate or stabilize contaminated sediments, focusing on the physical, chemical, and biological parameters critical to establishing its feasibility and long-term effectiveness. Potentially effective engineering control measures were also reviewed where erosion and site hydrodynamics are facilitating the transport of contaminated sediments to USACE-maintained navigation infrastructure. This literature review documents and summarizes those factors considered in establishing feasibility and long-term effectiveness of the approach as well as the applicable engineering tools employed and constraints encountered.
APA, Harvard, Vancouver, ISO, and other styles
3

Boyens, Jon M., Celia Paulsen, Nadya Bartol, Kris Winkler, and James Gimbi. Case Studies in Cyber Supply Chain Risk Management: Mayo Clinic. Gaithersburg, MD: National Institute of Standards and Technology, February 2020. http://dx.doi.org/10.6028/nist.cswp.02042020-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Boyens, Jon M., Celia Paulsen, Nadya Bartol, Kris Winkler, and James Gimbi. Case Studies in Cyber Supply Chain Risk Management: Seagate Technology. Gaithersburg, MD: National Institute of Standards and Technology, February 2020. http://dx.doi.org/10.6028/nist.cswp.02042020-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Boyens, Jon M., Celia Paulsen, Nadya Bartol, Kris Winkler, and James Gimbi. Case Studies in Cyber Supply Chain Risk Management: Mayo Clinic. Gaithersburg, MD: National Institute of Standards and Technology, 2020. http://dx.doi.org/10.6028/nist.cswp.11d.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Boyens, Jon M., Celia Paulsen, Nadya Bartol, Kris Winkler, and James Gimbi. Case Studies in Cyber Supply Chain Risk Management: Seagate Technology. Gaithersburg, MD: National Institute of Standards and Technology, 2020. http://dx.doi.org/10.6028/nist.cswp.11f.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Sriraj, P. S. Mobility Case Studies: Where Integrated Corridor Management Has Worked and Why. Tampa, FL: University of South Florida, May 2017. http://dx.doi.org/10.5038/cutr-nctr-rr-2017-01.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Boyens, Jon M., Celia Paulsen, Nadya Bartol, Kris Winkler, and James Gimbi. Case Studies in Cyber Supply Chain Risk Management: Anonymous Consumer Electronics Company. Gaithersburg, MD: National Institute of Standards and Technology, February 2020. http://dx.doi.org/10.6028/nist.cswp.02042020-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Boyens, Jon M., Celia Paulsen, Nadya Bartol, Kris Winkler, and James Gimbi. Case Studies in Cyber Supply Chain Risk Management: Anonymous Consumer Goods Company. Gaithersburg, MD: National Institute of Standards and Technology, February 2020. http://dx.doi.org/10.6028/nist.cswp.02042020-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Boyens, Jon M., Celia Paulsen, Nadya Bartol, Kris Winkler, and James Gimbi. Case Studies in Cyber Supply Chain Risk Management: Anonymous Renewable Energy Company. Gaithersburg, MD: National Institute of Standards and Technology, February 2020. http://dx.doi.org/10.6028/nist.cswp.02042020-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Materials management Case studies' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography