Relevant bibliographies by topics / Martensitic stainless steel Metallography

Academic literature on the topic 'Martensitic stainless steel Metallography'

Author: Grafiati
Published: 10 December 2022
Last updated: 28 January 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Martensitic stainless steel Metallography.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Martensitic stainless steel Metallography"

1

Ye, Youjun, Jing Li, Xingxing Lv, and Lin Liu. "Study on Failure Mechanism and Phase Transformation of 304 Stainless Steel during Erosion Wear." Metals 10, no. 11 (October 27, 2020): 1427. http://dx.doi.org/10.3390/met10111427.

Full text
Abstract:
In this paper, the failure mechanism and phase transformation process of 304 stainless steel during the erosion wear process were studied with a rotary erosion wear test device. The surface morphologies of the worn 304 stainless steel were investigated by scanning electron microscopy (SEM). The metallographic structures of the nonworn and worn 304 stainless steel were analyzed by optical microscope (OM) and transmission electron microscopy (TEM). In addition, the surface hardness on different areas of the sample was also measured. The results demonstrated that the failure mechanism of 304 stainless steel during the process of erosion wear was cutting and spalling caused by plastic deformation. The high-density dislocations move along the slip planes between slip lines, which resulted in the formation of martensite phase between the slip lines. Meanwhile, the martensitic transformation on the worn surface caused by severe plastic deformation was the coordination of dislocation martensite and twin martensite.
APA, Harvard, Vancouver, ISO, and other styles
2

Triadi, Syahwira Taqwa, Cherly Selindiana, Hermawan Judawisastra, Aditianto Ramelan, and Rochim Suratman. "Dynamic Plastic Deformation Induced by Repetitive Hammering on Cr-Mn Austenitic Stainless Steel." Metalurgi 37, no. 1 (June 23, 2022): 7. http://dx.doi.org/10.14203/metalurgi.v37i1.618.

Full text
Abstract:
Austenitic stainless steels have advantages, such as high ductility and good corrosion resistance. The cold working process can increase the hardness and strength of the material. However, because a metastable austenite phase occurs in that material, there is a phase change of γ austenite to α’-martensite and ε-martensite, which will reduce the ductility and its corrosion resistance. The strengthening process with dynamic plastic deformation (DPD) can prevent the formation of martensitic phases through repeated impact at high strain rates. This study analyzed microstructures and hardness evaluation on Cr-Mn austenitic stainless steel due to dynamic plastic deformation through the repetitive hammering method. Repetitive hammering with a strain rate of 6,2 s-1 on Cr-Mn austenitic stainless steels was carried out on five specimens with variations in the impact of 50, 100, 150, 250, and 350 times with impact energy of 486 J/cm2, 2.207 J/cm2, 2.569 J/cm2, 6.070 J/cm2, and 11.330 J/cm2 respectively. Microstructure, hardness, and XRD (X-ray diffraction) analyses were carried out on specimens before and after repetitive hammering. Metallography was carried out to observe the microstructure using an optical microscope. The hardness was tested through the Rockwell A hardness test. XRD examination was used to identify the phases formed and indications of nano-twins. The repetitive hammering process up to 350 times has succeeded in increasing hardness from 53.5 HRA to 71.6 HRA. Plastic deformation introduced by repetitive hammering produced slip bands, cross bands, wavy bands, and indication of nano-twins formation and increased the hardness.
APA, Harvard, Vancouver, ISO, and other styles
3

Chen, Lei, Ren Bo Song, Fu Qiang Yang, and Yu Pei. "Working Hardening Mechanism and Aging Treatment Behaviors of D631 Precipitation Hardening Stainless Steel Wire." Materials Science Forum 788 (April 2014): 362–66. http://dx.doi.org/10.4028/www.scientific.net/msf.788.362.

Full text
Abstract:
Precipitation hardening stainless steel has the advantages of both austenitic stainless steel and martensitic stainless steel, including good corrosion resistance, excellent processability and high strength. With the evolution of microstructure and properties of semi-austenitic precipitation hardening stainless steel (D631) during drawing process and aging treatment, the working hardening behaviors, law of phase transition, dissolution and precipitation state of alloying element are investigated to gain the toughness mechanism of D631. The results show that the tensile strength increases with the increase of the reduction of area, on the contrary, the plasticity decreases gradually. The tensile strength is 1529 MPa while the reduction of area is 54%. By means of X-ray diffraction (XRD) and metallograpic observation, the content of martensite increases with the increase of deformation, and makes the higher strength and lower plasticity. The alloying element dissolved in the matrix precipitates in fine particles by aging treatment, resulting in a higher strength of 1948MPa.
APA, Harvard, Vancouver, ISO, and other styles
4

Zhang, Hong Xia, Wu Yi Chen, Xiu Zhuo Fu, and Li Xia Huang. "Temperature Measurement and Burn Mechanism of Stainless Steel 1Cr11Ni2W2MoV in Grinding." Materials Science Forum 723 (June 2012): 433–38. http://dx.doi.org/10.4028/www.scientific.net/msf.723.433.

Full text
Abstract:
An experimental study was carried out to investigate the temperature measurement method and burn mechanism in the surface grinding of a stainless steel 1Cr11Ni2W2MoV with SG abrasive wheels. The temperature response at the wheel-workpiece interface was measured using a pair of thermocouple composed of the workpiece material and a single enameled constantan wire which was implanted in the workpiece. Changes in the ground surface morphology and metallography of the specimens in different grinding conditions were analyzed. Plastically deformed coating layers and micro-cracks were observed on ground surface by SEM (Scanning Electronic Microscopy) when grinding burn occurs. Grinding burn mechanism was unveiled from a metallographic point of view. When the average temperature exceeded phase alteration temperature of 1Cr11Ni2W2MoV, the original gray strip martensite structure was replaced by tempered sorbite structure, which caused a sharp reduction of the workpiece surface hardness. The results provided a theoretical and experimental basis for technical optimization in the grinding of high temperature stainless steel with high efficiency and high quality.
APA, Harvard, Vancouver, ISO, and other styles
5

Zhao, Xuehui, Wei Huang, Guoping Li, Yaorong Feng, and Jianxun Zhang. "Effect of CO2/H2S and Applied Stress on Corrosion Behavior of 15Cr Tubing in Oil Field Environment." Metals 10, no. 3 (March 23, 2020): 409. http://dx.doi.org/10.3390/met10030409.

Full text
Abstract:
The corrosion behavior of a 15Cr-6Ni-2Mo martensitic stainless steel (15Cr stainless steel) in a CO2/H2S environment was investigated by conducting high-temperature/high-pressure immersion tests combined with scanning electron microscopy and metallographic microscopy. The presence of H2S decreased the corrosion resistance of the 15Cr tubing steel. The critical H2S partial pressure (PH2S) for stress corrosion cracking in the 15Cr tubing steel in the simulated oil field environment with a CO2 partial pressure of 4 MPa and an applied stress of 80% σs was identified. The 15Cr tubing steel mainly suffered uniform corrosion with no pitting and cracking when the PH2S was below 0.5 MPa. When the PH2S increased to 1 MPa and the test temperature was 150 °C, the pitting and cracking sensitivity increased. The stress corrosion cracking at a higher PH2S is attributed to the sulfide-induced brittle fracture.
APA, Harvard, Vancouver, ISO, and other styles
6

Bobir, S. V., I. Yu Prikhodko, D. V. Loshkarev, S. S. Zakharchuk, and P. V. Krot. "Analysis of the amount of retained austenite in the structure of steel rolls for sheet rolling." Fundamental and applied problems of ferrous metallurgy, no. 34 (2020): 256–64. http://dx.doi.org/10.52150/2522-9117-2020-34-256-264.

Full text
Abstract:
The amount of residual austenite in martensitic roll steels is an important technological parameter of heat treatment, which affects the performance properties of the rolls. But determining its amount in roll steels is a complex and not fully solved scientific and technical problem. The aim of the work was to comparatively analyze the amount of residual austenite in the structure of alloy steel rolls by X-ray diffraction, ultrasonic methods and metallography analysis. However, the qualitative difference of microstructures in the content of the light phase - austenite, confirms the results of X-ray diffraction analysis. No correlation was found between the austenite content in the samples and their hardness. It was found that the X-ray method, based on the comparison of the intensities of the α- and γ-phase lines of iron, overestimates the value of the amount of residual austenite in some samples of roll steels. The results of the analysis of residual austenite by ultrasound rate showed better convergence. The amounts of residual austenite, calculated on the sample of stainless steel (100% γ-Fe), had reduced values (2.6-4.5%). The most accurate results on the amount of residual austenite gave the use of the established regression dependence with the selected standard (2.7-7.8%). This dependence is obtained at the speed of sound in austenite ~ 4000 m / s. It is determined that the application of the ultrasonic method allows to determine the content of residual austenite in the samples of roll steels quite quickly and accurately.
APA, Harvard, Vancouver, ISO, and other styles
7

Zhang, Huayu, Zhiheng Wei, Fengqin Xie, and Baohai Sun. "Assessment of the Properties of AISI 410 Martensitic Stainless Steel by an Eddy Current Method." Materials 12, no. 8 (April 19, 2019): 1290. http://dx.doi.org/10.3390/ma12081290.

Full text
Abstract:
Based on electromagnetic theory, metallurgical characteristics can be detected by eddy current nondestructive testing technology. In this study, the relationship between the surface microstructure and the eddy current output of martensitic stainless steel AISI 410 was studied using this technology at different quenching temperatures. The mechanical properties include material hardness, microstructure types and microstructural changes after thermal treatment was evaluated. Using Vickers hardness as the surface hardness index of AISI 410 steel, the relationship between eddy current output signal, in terms of impedance and inductance, and sample surface hardness was studied and the effects of different quenching temperatures on the steel’s surface hardness was examined. In addition, the change of microstructure types of AISI 410 steel after thermal treatment was detected by the eddy current nondestructive testing method, and the results were verified by metallographic microscopy.
APA, Harvard, Vancouver, ISO, and other styles
8

Berecz, Tibor, Éva Fazakas, Enikő Réka Fábián, Péter Jenei, and János Endre Maróti. "Investigation of Thermally Induced Deterioration Processes in Cold Worked SAF 2507 Type Duplex Stainless Steel by DTA." Crystals 10, no. 10 (October 14, 2020): 937. http://dx.doi.org/10.3390/cryst10100937.

Full text
Abstract:
Thermally induced deterioration processes were studied in cold worked (up to 60% deformation) SAF 2507 type super-duplex stainless steel (SDSS) by differential thermal analysis (DTA). DTA results revealed two transformations. Parent and inherited phases of these transformations were examined by other methods too, such as micro-hardness tests, optical metallography and X-ray diffraction (XRD). Finally, these transformations were identified as the formation of α’- and σ-phases. Formation of strain-induced martensite (SIM) and recrystallization were not experienced until 1000 °C, despite high degree of cold working. Activation energies of the σ-phase precipitation and α’-phase formation were determined from the Kissinger plot, through DTA measurements—they are 275 and 220 kJ/mol, respectively—in good agreement with the values found in the literature.
APA, Harvard, Vancouver, ISO, and other styles
9

Al Jabbari, Youssef S., Raymond Fournelle, Sara M. Al Taweel, and Spiros Zinelis. "Failure analysis of eleven Gates Glidden drills that fractured intraorally during post space preparation. A retrieval analysis study." Biomedical Engineering / Biomedizinische Technik 63, no. 4 (July 26, 2018): 407–12. http://dx.doi.org/10.1515/bmt-2016-0245.

Full text
Abstract:
Abstract The purpose of this study was to determine the failure mechanism of clinically failed Gates Glidden (GG) drills. Eleven retrieved GG drills (sizes #1 to #3) which fractured during root canal preparation were collected and the fracture location was recorded based on macroscopic observation. All fracture surfaces were investigated by a SEM. Then the fractured parts were embedded in acrylic resin and after metallographic preparation, the microstructure and elemental composition was evaluated by SEM and EDS. The Vickers hardness (HV) of all specimens was also determined. Macroscopic examination and SEM analysis showed that the drills failed near the hand piece end by torsional fatigue with fatigue cracks initiating at several locations around the circumference and propagating toward the center. Final fracture followed by a tensile overloading at the central region of cross section. Microstructural analysis, hardness measurements and EDS show that the drills are made of a martensitic stainless steel like AISI 440C. Based on the findings of this study, clinicians should expect fatigue fracture of GG drills that have small size during root canal preparation. Selection of a more fatigue resistant stainless steel alloy and enhancing the instrument design might reduce the incidence of quasi-cleavage fracture on GG drills.
APA, Harvard, Vancouver, ISO, and other styles
10

Dineshraj, S., Mayukh Acharya, Alok Agarwal, S. Girikumar, Govind, S. C. Sharma, and Koshy M. George. "Development of Hot Isostatic Pressing Technology for Investment Cast Products." Materials Science Forum 830-831 (September 2015): 19–22. http://dx.doi.org/10.4028/www.scientific.net/msf.830-831.19.

Full text
Abstract:
Hot isostatic pressing (HIPping) technology is used for healing the casting defects for aerospace applications. Castings used for aerospace applications like turbo-pumps need to meet very stringent quality requirements. Complexity of the castings used in these applications, makes it difficult to meet the quality requirements in all the areas. Defects like gas holes, shrinkages, cavities etc. may occur in few locations and need to be repaired by welding or healed by HIPping. In the present study, we attempted to simulate the defect healing capability of HIP in a systematic manner. Artificial defects were created in Austenite-Martensite grade stainless steel cast rod. These rods were then subjected to HIP prcoss cycle at 1150 °C and at a pressure of 1620 bar. Healing of the defects was ensured through X-ray radiography. Detailed microstructural analysis using optical metallography and scanning electron microscopy (SEM) with EDX was carried out before and after HIPping, to understand the defect healing mechanisms. These results are discussed in detail here.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Martensitic stainless steel Metallography"

1

Morgan, Terence S. "Microstructural effects of neutron irradiation on ferritic/martensitic stainless steels." Thesis, Loughborough University, 1992. https://dspace.lboro.ac.uk/2134/13768.

Full text
Abstract:
A commercial grade 12%CrMo VNb ferritic/martensitic stainless steel in the form of parent plate and high-nickel off-normal weld material has been fast neutron irradiated to equivalent damage levels of 33 and 50 dpa at 400 and 465°C respectively. The microstructural and microchemical changes induced in the irradiated material, together with as-tempered and thermal control material, have been determined to high resolution by conventional transmission electron microscopy and the use of a field emission gun scanning transmission electron microscope (FEGSTEM). Equilibrium (co )segregation of chromium, molybdenum and phosphorus was detected at boundary planes in thermally aged material, with greater enrichment at the higher ageing temperature. The relative magnitudes of apparent phosphorus segregation at the two temperatures were in accordance with McLean's model governing the kinetic approach to equilibrium. The electron probe I segregant interaction was modelled in an attempt to deconvolute true segregant concentrations from derived concentration profiles: these 'deconvoluted' concentrations approximated those predicted by McLean's model. The net effects of irradiation on parent plate interfacial microchemistry were found to be to: (i) inhibit the (co )segregation of chromium, molybdenum and phosphorus, (ii) cause chromium depletion from adjacent to boundary planes, (iii) cause enrichment of silicon at prior austenite and lath boundaries during irradiation at 400°C and (iv) cause enrichment of nickel at lath boundary planes only, at both temperatures. The radiationinduced precipitates ~C and G phase, both nickel- and silicon-rich, were observed. The fully martensitic off-normal weld metal transformed to a duplex austenite!ferrite structure during irradiation at 465°C; in contrast the thermal control was at least metastable. The transformation was thought to be a martensitic reversion, facilitated by radiation-generated dislocation loops acting as nucleation sites. The austenite was heavily voided (-15 vol.%); the ferrite was relatively void-free. Depletion of the oversized solutes chromium, manganese and molybdenum and enrichment of nickel, silicon, aluminium and traces of titanium were detected at void interfaces in the austenite: little segregation could be discerned at voids in the ferrite. Overall, the results within this work and in comparison to previous studies highlight the sensitivity to initial composition, microstructure and heat treatment that the 12%Cr ferritic/martensitic steels display in their response to irradiation.
APA, Harvard, Vancouver, ISO, and other styles
2

Naraghi, Reza. "Martensitic Transformation in Austenitic Stainless Steels." Thesis, KTH, Metallografi, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-37214.

Full text
Abstract:
Martensitic transformation is very important in austenitic stainless steels where the transformation induced plasticity phenomenon provides a combination of good mechanical properties, such as formability and strength. However, the difficulty of predicting the material behaviour is one of the major drawbacks of these steels. In order to model this behaviour it is of great importance to be able to characterize the morphology, crystallography and the amount of different types of martensite. The morphology and crystallography of thermal and deformation induced lath martensite in stainless steels were re-examined by means of optical microscopy and electron backscatter diffraction (EBSD) technique. The experiments were performed on AISI301, 304 and 204Cu austenitic stainless steels. Plastic deformation was carried out by means of uniaxial tensile tests at the strain rate of  to produce strain induced α’-martensite at a temperature ranging from 0 to 60ºC. An in-situ measurement of the martensite content was performed during the tensile testing using a Ferritescope to provide the necessary experimental values for modelling. Optical microscopy revealed the morphology of the strain induced α’-martensite as sets of thin parallel needles that go through the parent austenite grain and stop at the grain or annealing twin boundaries. Large amount of α’-martensite could be seen at the intersection of shear bands. However, considerable amount of α’-martensite was also observed when only one set of bands is activated. EBSD was successfully used to analyze the morphology and crystallography of martensite. The α’-martensite maintained the Kurdjumov-Sachs (K-S) orientation relationship with the austenite phase. Although all six possible variants did not appear within a single packet, one or two variants were often favoured out of six related to the specific {111} plane. The misorientations between the neighbouring variants were mainly <111> 60º or <110> 49.5º.
APA, Harvard, Vancouver, ISO, and other styles
3

Danks, J. "Cyclic creep of T316 stainless steel." Thesis, Coventry University, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.328644.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Buckley, J. R. "Hydrogen embrittlement of austenitic stainless steel." Thesis, University of Newcastle Upon Tyne, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.315550.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Butler, J. J. F. "Hydrogen embrittlement of austenitic stainless steel." Thesis, University of Newcastle Upon Tyne, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.374127.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

O'Donnell, I. J. "Ductile fracture in type 316 stainless steel." Thesis, University of Liverpool, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.356270.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Mattin, Sarah Patricia. "Nucleation of corrosion pits on stainless steel." Thesis, University of Cambridge, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.321495.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Pirouznia, Pouyan. "High cycle fatigue properties of stainless martensitic chromium steel springs." Thesis, KTH, Materialteknologi, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-103201.

Full text
Abstract:
For many materials and components like in high speed trains and airplanes fatigue failures occur in the range of over 107 load cycles which is called the high cycle fatigue range. A modern version of the springs was invented which are applied in a certain application. Ultrasonic fatigue testing (20 kHz machine) was conducted for evaluating the steel of the springs. This research explores the fundamental understanding of high cycle fatigue testing of strip steel and assesses a stainless martensitic chromium steel at the high cycle fatigue range. Finite element modeling was conducted to gain knowledge about the effect of various parameters. Significant attention was devoted to the fatigue failure initiations by SEM/EDS. The work demonstrated that the method of investigation for high cycle fatigue test is reliable. Fatigue failure at this range was initiated by internal defects which all included non-metallic inclusion. A critical distance was defined Within the strip fatigue specimen where all the fatigue failure initiated. The 3D stress field in the specimen was determined by FEM modeling and the local applied stress at the whole of the flat part of specimen and critical distance was estimated. FEM was also employed to give additional information about the effect of parameters. It was established that damping had the largest influence. The local applied stress of the fatigue test was calculated by means of FEM and SEM analysis. It was used to adjust the S-N curve which resulted in 15% lower values than the nominal applied stress.
APA, Harvard, Vancouver, ISO, and other styles
9

Hedström, Peter. "Deformation induced martensitic transformation of metastable stainless steel AISI 301 /." Luleå : Luleå University of Technology, 2005. http://epubl.luth.se/1402-1757/2005/79.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Hedström, Peter. "Deformation induced martensitic transformation of metastable stainless steel AISI 301." Licentiate thesis, Luleå, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-25748.

Full text
Abstract:
Metastable stainless steels are promising engineering materials demonstrating good corrosion resistance and mechanical properties. Their mechanical properties are however significantly affected by the deformation induced martensitic transformation. Hence, in order to use these steels to their full potential it is vital to have profound knowledge on this martensitic phase transformation. The aim of this thesis was therefore to investigate the evolution of phase fractions, texture, microstrains and microstructure to improve the current understanding of the deformation induced martensitic transformation in AISI 301. To investigate the deformation behavior of AISI 301, in-situ high-energy x- ray diffraction during tensile loading has been performed on samples suffering different cold rolling reduction. Ex-situ transmission electron microscopy, electron back-scattered diffraction and optical microscopy were also used to characterize the microstructure at different deformation levels. The results show that parts of the austenite transforms to both ά- martensite and ε-martensite during deformation of AISI 301. The transformation behavior of ά-martensite is however completely different from the transformation behavior of ε-martensite. ε-martensite forms in a parabolic behavior, while the ά-martensite transformation can be divided in three characteristic stages. The third transformation stage of ά-martensite has previously not been reported and it is characterized by a series of rapid transformations, each of which is followed by a period of yielding without any transformation. Moreover, the lattice strain evolution in the austenite at high plastic strains was found to be oscillatory, which is correlated with the stepwise transformation of ά-martensite as well as changes in x-ray peak broadening. This behavior was also coupled with the evolution of microstructure, where a distinct banded structure consisting of slip bands and Ü-martensite was observed at low plastic strains. This banded structure was however broken at high plastic strains when the ά-martensite grew larger and formed a block- shaped morphology. These findings lead to the conclusion that the three stages of ά- martensite transformation is due to different stages of nucleation and growth. The ά-martensite will first form as small nucleus, mainly at dislocation pile-ups along slip bands. The nucleuses will grow moderately in size and the structure will become saturated with nucleuses. Hence, the only way more ά-martensite can form is by growth of the existing nucleuses. This growth is very localized and seen as bursts in the transformation curve. The oscillatory behavior observed for the lattice strains during martensite formation possibly originate when semicoherent boundaries between austenite and ά-martensite become incoherent as the ά-martensite grow large.
Godkänd; 2005; 20061213 (haneit)
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Martensitic stainless steel Metallography"

1

Wood, Gregory John. Tribological properties of surface engineered martensitic stainless steel. Birmingham: University of Birmingham, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Akshent͡seva, A. P. Metallografii͡a korrozionnostoĭkikh staleĭ i splavov: Spravochnik. Moskva: "Metallurgii͡a", 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Vilpas, Martti. Prediction of microsegregation and pitting corrosion resistance of austenitic stainless steel welds by modelling. Espoo [Finland]: Technical Research Centre of Finland, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

American Welding Society. Committee on Filler Metals. and American Welding Society. Technical Activities Committee., eds. Standard methods for the determination of diffusible hydrogen content of martensitic, bainitic, and ferritic steel weld metal produced by arc welding. Miami, Fla: American Welding Society, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Rolling contact fatigue of surface modified 440C using a "GE-polymet" type disc rod test rig. [Marshall Space Flight Center, Ala.]: National Aeronautics and Space Administration, George C. Marshall Space Flight Center, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

High-Chromium Ferritic and Martensitic Steels for Nuclear Applications (Monograph (American Society for Testing and Materials), 3.). ASTM International, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Martensitic stainless steel Metallography"

1

Crouse, Robert S., and B. C. Leslie. "Techniques for Stainless Steel Microscopy." In Applied Metallography, 71–88. Boston, MA: Springer US, 1986. http://dx.doi.org/10.1007/978-1-4684-9084-8_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Li, D. Z., Y. Y. Li, P. Wang, and S. P. Lu. "Martensitic Stainless Steel 0Cr13Ni4Mo for Hydraulic Runner." In Ceramic Transactions Series, 265–77. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2011. http://dx.doi.org/10.1002/9781118019467.ch27.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Yilmaz, R., and Ali Türkyilmazoglu. "Tensile Properties of Martensitic Stainless Steel Weldments." In Materials and Technologies, 319–22. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-460-x.319.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Dieck, Sebastian, Martin Ecke, Paul Rosemann, and Thorsten Halle. "Reversed Austenite for Enhancing Ductility of Martensitic Stainless Steel." In Proceedings of the International Conference on Martensitic Transformations: Chicago, 123–28. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-76968-4_19.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Cattant, François. "Rupture and Stress Corrosion Cracking of Martensitic Stainless Steel." In Materials Ageing in Light-Water Reactors, 1107–42. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-85600-7_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Xu, J. Y., B. J. van Brussel, J. Noordhuis, P. M. Bronsveld, and J. Th M. de Hosson. "Martensitic Transformation in 304 Stainless Steel after Implantation with Neon." In Surface Engineering, 167–76. Dordrecht: Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-009-0773-7_18.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ahmed, Sarfraj, and Arjun Kundu. "Erosion Response of Martensitic Stainless Steel Subjected to Slurry Flow." In Green Materials and Advanced Manufacturing Technology, 51–58. First edition. | Boca Raton, FL : CRC Press, 2021. | Series: Green engineering and technology: Concepts and applications: CRC Press, 2020. http://dx.doi.org/10.1201/9781003056546-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Trivedi, Hitesh K., Frederick Otto, Bryan McCoy, Rabi S. Bhattacharya, and Timothy Piazza. "Heat Treatment Process for Martensitic Stainless Steel Pyrowear 675 for Improved Corrosion Resistance." In Bearing Steel Technologies: 10th Volume, Advances in Steel Technologies for Rolling Bearings, 1–20. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2014. http://dx.doi.org/10.1520/stp158020140061.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

yuan, Wei Qiao, and Li Yue zhong. "Analysis of Heat Treatment for Martensitic Stainless Steel Used in CRDM." In Energy Materials 2014, 487–92. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-48765-6_58.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Yuan, Wei Qiao, and Li Yue Zhong. "Analysis of Heat Treatment for Martensitic Stainless Steel Used in CRDM." In Energy Materials 2014, 487–92. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2015. http://dx.doi.org/10.1002/9781119027973.ch58.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Martensitic stainless steel Metallography"

1

Prabhakaran, Ramprashad, and Ajit K. Roy. "The Effect of Environmental and Mechanical Variables on Stress Corrosion Cracking of a Martensitic Stainless Steel for Transmutation Applications." In 12th International Conference on Nuclear Engineering. ASMEDC, 2004. http://dx.doi.org/10.1115/icone12-49399.

Full text
Abstract:
Extensive work has been performed on Type 422 stainless steel (SS), to characterize environment-induced degradations in aqueous environments of different pH values at ambient and elevated temperatures. The test material was thermally treated prior to the evaluation of stress-corrosion-cracking (SCC) behavior by slow-strain-rate (SSR) and constant-load (CL) testing techniques, using smooth and notched tensile specimens. Cyclic potentiodynamic polarization (CPP) testing was performed to evaluate localized corrosion behavior using a three-electrode polarization technique in similar environments. Fractographic and metallographic evaluations of broken specimens were also performed by scanning electron microscope (SEM) and optical microscope, respectively.
APA, Harvard, Vancouver, ISO, and other styles
2

Bandyopadhyay, Subhra, and Silpa Budugur Suresh. "Residual Stress Measurements in Martensitic Stainless Steel." In ASME 2005 Pressure Vessels and Piping Conference. ASMEDC, 2005. http://dx.doi.org/10.1115/pvp2005-71492.

Full text
Abstract:
Residual stresses may be generated in target structural material used in accelerator-driven transmutation. Calibration curves were developed for transmutation target structural materials using positron annihilation spectroscopic (PAS) method. These calibration curves consisted of different line shape parameters (S, T & W) determined by the PAS method on martensitic stainless steel as a function of tensile stress/strain imparted to cylindrical specimens. This paper presents a comparative analysis of residual stresses in these specimens as a function of (S, T & W) determined by the PAS technique. The resultant data showed a consistent pattern in these parameters versus applied stresses ranging between the Yield and the Ultimate tensile strength.
APA, Harvard, Vancouver, ISO, and other styles
3

Codd, Daniel S. "Automotive Mass Reduction with Martensitic Stainless Steel." In SAE 2011 World Congress & Exhibition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2011. http://dx.doi.org/10.4271/2011-01-0427.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Haušild, P., P. Pilvin, and M. Karlík. "Mechanical Behavior of a Metastable Austenitic Stainless Steel." In ESOMAT 2009 - 8th European Symposium on Martensitic Transformations. Les Ulis, France: EDP Sciences, 2009. http://dx.doi.org/10.1051/esomat/200906016.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

De Lorenzi-Venneri, Giulia, and Scott D. Crockett. "AM363 martensitic stainless steel: A multiphase equation of state." In SHOCK COMPRESSION OF CONDENSED MATTER - 2015: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter. Author(s), 2017. http://dx.doi.org/10.1063/1.4971554.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

"Dry Sliding Wear Characteristics of AISI440C Martensitic Stainless Steel." In International Conference on Advances in Engineering and Technology. International Institute of Engineers, 2014. http://dx.doi.org/10.15242/iie.e0314169.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Daurelio, Giuseppe, Antonio D. Ludovico, Christos N. Panagopoulos, and Corrado Tundo. "Ferritic, martensitic, and precipitation hardening stainless steel laser weldings." In Second GR-I International Conference on New Laser Technologies and Applications, edited by Alexis Carabelas, Paolo Di Lazzaro, Amalia Torre, and Giuseppe Baldacchini. SPIE, 1998. http://dx.doi.org/10.1117/12.316611.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Beese, A. M., D. Mohr, and P. O. Santacreu. "Isotropic Phase Transformation in Anisotropic Stainless Steel 301LN Sheets." In ESOMAT 2009 - 8th European Symposium on Martensitic Transformations. Les Ulis, France: EDP Sciences, 2009. http://dx.doi.org/10.1051/esomat/200902001.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Pyshmintsev, I. Yu, S. M. Bityukov, V. I. Pastukhov, S. V. Danilov, L. O. Vedernikova, and M. L. Lobanov. "Evolution of microstructure in stainless martensitic steel for seamless tubing." In MECHANICS, RESOURCE AND DIAGNOSTICS OF MATERIALS AND STRUCTURES (MRDMS-2017): Proceedings of the 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. Author(s), 2017. http://dx.doi.org/10.1063/1.5017396.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Buono, V., R. Carvalho, L. Lima, M. Lima, A. Rocha, and T. Santos. "Austenite Reversion during ing Tempering of Martensitic-Ferritic Stainless Steel." In MS&T19. TMS, 2019. http://dx.doi.org/10.7449/2019mst/2019/mst_2019_468_475.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Martensitic stainless steel Metallography"

1

Li, H., R. H. Jones, and D. S. Gelles. Effect of internal hydrogen on the mixed-mode I/III fracture toughness of a ferritic/martensitic stainless steel. Office of Scientific and Technical Information (OSTI), April 1995. http://dx.doi.org/10.2172/114928.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Li, Huaxin, D. S. Gelles, and J. P. Hirth. Fracture toughness of the IEA heat of F82H ferritic/martensitic stainless steel as a function of loading mode. Office of Scientific and Technical Information (OSTI), April 1997. http://dx.doi.org/10.2172/543286.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Li, H., R. H. Jones, and D. S. Gelles. Dependence of mode I and mixed mode I/III fracture toughness on temperature for a ferritic/martensitic stainless steel. Office of Scientific and Technical Information (OSTI), April 1995. http://dx.doi.org/10.2172/114929.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Martensitic stainless steel Metallography' for particular source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography