Relevant bibliographies by topics / Magnetic circuit breaker

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers

Academic literature on the topic 'Magnetic circuit breaker'

Author: Grafiati
Published: 28 June 2021
Last updated: 11 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Magnetic circuit breaker.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Magnetic circuit breaker"

1

Haznadar, Z., and S. Berberovic. "Electric and magnetic field calculations of vacuum circuit breaker." IEEE Transactions on Magnetics 21, no. 6 (November 1985): 2480–83. http://dx.doi.org/10.1109/tmag.1985.1064240.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Park, Sangyong, and Hyosang Choi. "Operation Characteristics for the Superconducting Arc-Induction Type DC Circuit Breaker." Energies 13, no. 15 (July 30, 2020): 3897. http://dx.doi.org/10.3390/en13153897.

Full text
Abstract:
The multi-terminal direct current network is expected to commercialize while carrying out projects related to DC power systems worldwide. Accordingly, it is necessary to develop a DC circuit breaker required for the DC power system. A DC circuit breaker should be developed to protect the DC power system and the consumer from the transient state on the line in any case. Currently, the use of power semiconductors increases the performance of DC circuit breakers. However, power semiconductors are expensive and suffer series of losses from frequent failures. Therefore, the DC circuit breaker must have a reliable, stable, and inexpensive structure. We proposed a new type of arc-induction type DC circuit breaker. It consists of a mechanical blocking contact, an induction needle and a superconducting magnet. It blows the arc with an induction needle using the Lorentz force according to the high magnetic field of the superconducting magnet. The arc-induction needle absorbs the arc and flows through the ground wire to the ground to extinguish the arc. We established this principle of arc induction as a mathematical model. In addition, the Maxwell program was used to secure data of electric and magnetic fields and apply them to mathematical models. The results obtained through numerical analysis were analyzed and compared. As a result, we confirmed that the magnitude of the force exerted on the electrons between the mechanical contacts with the superconducting magnets increased about 1.41 times and reasoned the arc-induction phenomenon out numerically.
APA, Harvard, Vancouver, ISO, and other styles
3

Li, Bin, Shuang Li, and Xu Chen Lu. "Research on Classification Performance of Circuit Breaker Vibration Signal Based on Fuzzy C-Means Clustering Analysis." Advanced Materials Research 960-961 (June 2014): 1352–55. http://dx.doi.org/10.4028/www.scientific.net/amr.960-961.1352.

Full text
Abstract:
With permanent magnetic actuator monostable circuit breaker as the research object, it gets three different running status signal data, normal circuit breaker closing state , break-brake spring single loss and Institutions unsmooth Through constructing data acquisition platform. The performance of the three methods of feature extraction is compared, short-time Fourier transform, wavelet packet energy entropy and Hilbert huang transform, through fuzzy c-means clustering analysis algorithm. Through the comparative study, it is concluded that adopt wavelet packet transform method to get the best classify performance of time-frequency entropy vector .
APA, Harvard, Vancouver, ISO, and other styles
4

Yu, Lyun, Young-Geun Kim, Sung-Ho Lee, and Hae-Yong Cho. "Dynamic Behavior of Vacuum Circuit Breaker with Permanent Magnetic Actuator." Transactions of the Korean Society of Mechanical Engineers A 31, no. 5 (May 1, 2007): 578–85. http://dx.doi.org/10.3795/ksme-a.2007.31.5.578.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Woo, K. I., and B. I. Kwon. "Characteristic Analysis and Modification of PM-Type Magnetic Circuit Breaker." IEEE Transactions on Magnetics 40, no. 2 (March 2004): 691–94. http://dx.doi.org/10.1109/tmag.2004.825423.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Hachami, K., D. Moussaid, M. Rahmoun, and A. El Hassani. "Design and Realization a New Thermoelectric Sensor, Application." Active and Passive Electronic Components 23, no. 3 (2000): 145–55. http://dx.doi.org/10.1155/apec.23.145.

Full text
Abstract:
The present paper deals with design and realization of a New thermoelectric sensor adapted to conceive a circuit breaker, using the thermoelectric effects (Joule, Peltier and Seebeck). The sensor includes two printed circuits. The first is constituted of two resistive tracks of constantan, it is the transmitting circuit. The second, a planar thermoelectric circuit acting as a receiver, is constituted of many plated differential thermocouples. The transmitting circuit is placed on the top surface of the receiver circuit so that the resistive tracks are placed on the levels of thermoelectric junctions. The measuring method consists to passing electrical currents through the resistive tracks in order to generate temperature gradients between junction points of the bimetallic circuit. Then the resulting temperature differences between junction points is directly converted into a proportional Seebeck voltage. As an application, the sensor is adapted to realize a differential circuit-breaker with a low difference current.
APA, Harvard, Vancouver, ISO, and other styles
7

Al-khafaf, Haider, and Johnson Asumadu. "Efficient Protection Scheme Based on Y-Source Circuit Breaker in Bi-Directional Zones for MVDC Micro-Grids." Inventions 6, no. 1 (March 10, 2021): 18. http://dx.doi.org/10.3390/inventions6010018.

Full text
Abstract:
A new bi-directional circuit breaker is presented for medium-voltage dc (MVDC) systems. The Y-source impedance network topology is used to implement the breaker. The current transfer function is derived to show the frequency response and the breaker operation with the high frequencies. Mathematical analysis is achieved with different conditions of coupling among the breaker inductors. The minimum level of the magnetic coupling is determined, which is represented by the null condition. The effect of the turns-ratio on this condition is investigated as well. The breaker is designed with two types of fault conductance slope rates. The Y-source breaker is simulated, and the results verify the breaker operation during the fault condition and the load change. The results also demonstrate the effect of the coupling level on the minimum values of the source current when the fault occurs. Based on the expected fault type in the MVDC systems, the proposed breaker is developed to interrupt the overcurrent due to any of these fault types. A protection scheme is proposed for a 12-bus, two-level micro-grid, where the Y-source breakers are used in the bi-directional zones. The results verify the ability of the breaker to conduct and interrupt the current in both directions of the power flow.
APA, Harvard, Vancouver, ISO, and other styles
8

Ma, Shao Hua, and Chuang Liu. "TDV10 Type Vacuum Circuit Breaker Electromagnetic Operating Mechanism Design." Advanced Materials Research 912-914 (April 2014): 799–805. http://dx.doi.org/10.4028/www.scientific.net/amr.912-914.799.

Full text
Abstract:
TDV10 upright type vacuum circuit breaker is mainly used for electric locomotive running in the process of main circuit disconnection and connection, and also applied in the overload protection and short circuit protection.And TDV10 type operating mechanism is pneumatic, pneumatic structure because of its complex structure, cylinder work noise, air leakage risk, now a electromagnetic operating mechanism is designed to replace the pneumatic institution.TDV10 type circuit breaker through analysis the principle and performance parameters of the comparison, put forward the feasibility in theory, and gives the basic design of the electromagnetic mechanism and external circuit.Using Ansoft software design agency for static and dynamic simulation analysis of magnetic field. Through the analysis and comparison of the curve of each parameter, verify the feasibility of the design.
APA, Harvard, Vancouver, ISO, and other styles
9

VIRJOGHE, ELENA OTILIA, MIHAIL FLORIN STAN, COSMIN COBIANU, and NICOLAE FIDEL. "2D NUMERICAL SIMULATION OF MAGNETIC FIELD IN LOW-VOLTAGE CIRCUIT BREAKER." Journal of Science and Arts 20, no. 4 (December 30, 2020): 1049–60. http://dx.doi.org/10.46939/j.sci.arts-20.4-c06.

Full text
Abstract:
Low Voltage Circuit Breakers is used for the switching process in power distribution and control system. This process is accompanied by the occurrence of the electric arc between the fixed and mobile contact pieces of the apparatus. The electric arc is introduced into the quenching chamber formed of ferromagnetic iron splitter plates, divided into short arcs and then the arc may extinguish after passing the current through zero. Behavior of the electric arc in the extinguishing chamber influences the performance of these devices, the ferromagnetic material leading to the improvement of these performances. This article presents the calculation of the magnetic field components in the extinguishing chamber of the low-voltage circuit breaker of the 2000 A, 690 V manufactured by Schneider Electric and to describe the physical phenomenon and mathematical calculation of the electric arc in LVCB. The Ansys Multiphysics program is used to determine the spectrum of magnetic field components. This program is based on the finite element method for solving Maxwell equations.
APA, Harvard, Vancouver, ISO, and other styles
10

Meng, Xiang Fei, and Zhi Chao Li. "Design of Side Line Short Circuit Detection Device Load of Low Voltage Circuit Breaker before Closing." Advanced Materials Research 889-890 (February 2014): 703–6. http://dx.doi.org/10.4028/www.scientific.net/amr.889-890.703.

Full text
Abstract:
It uses MSP430F2274, the ultra low power microcontroller, as the control core of short circuit detection device, through the accurate measurement of low voltage circuit breaker load side of the main wiring of insulation resistance value and the interphase insulation resistance value, outputting high voltage startup sound and light alarm device, and then accomplish the open circuit fault detection. Testing power supply is the use of magnetic coupling resonance principle, from the main power grid electrical insulation for short circuit detection device. The device has the advantages of low cost, small volume, good safety, good detection effect, and can be embedded in use in low voltage circuit breaker.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Magnetic circuit breaker"

1

Zhou, Xigen. "Electrical, Magnetic, Thermal Modeling and Analysis of a 5000A Solid-State Switch Module and Its Application as a DC Circuit Breaker." Diss., Virginia Tech, 2005. http://hdl.handle.net/10919/28900.

Full text
Abstract:
This dissertation presents a systematic design and demonstration of a novel solid-state DC circuit breaker. The mechanical circuit breaker is widely used in power systems to protect industrial equipment during fault or abnormal conditions. Compared with the slow and high-maintenance mechanical circuit breaker, the solid-state circuit breaker is capable of high-speed interruption of high currents without generating an arc, hence it is maintenance-free. Both the switch and the tripping unit are solid-state, which meet the requirements of precise protection and high reliability. The major challenge in developing and adopting a solid-state circuit breaker has been the lack of power semiconductor switches that have adequate current-carrying capability and interruption capability. The high-speed, high-current solid-state DC circuit breaker proposed and demonstrated here uses a newly-emerging power semiconductor switch, the emitter turn-off (ETO) thyristor as the main interruption switch. In order to meet the requirement of being a high-current circuit breaker, ETO parallel operation is needed. Therefore the major effort of this dissertation is dedicated to the development of a high-current (5000A) DC switch module that utilizes multiple ETOs in parallel. This work can also be used to develop an AC switch module by changing the asymmetrical ETOs used to symmetrical ETOs. An accurate device model of the ETO is needed for the development of the high-current DC switch module. In this dissertation a novel physics-base lumped charge model is developed for the ETO thyristor for the first time. This model is verified experimentally and used for the research and development of the emitter turn-off (ETO) thyristor as well as the DC switch module discussed in this dissertation. With the aid of the developed device model, the device current sharing between paralleled multiple ETO thyristors is investigated. Current sharing is difficult to achieve for a thyristor-type device due to the large device parameter variations and strong positive feedback mechanism in a latched thyristor. The author proposes the "DirectETO" concept that directly benefits from the high-speed capability of the ETO and strong thermal couplings among ETOs. A high-current DC switch module based on the DirectETO can be realized by directly connecting ETOs in parallel without the bulky current sharing inductors used in other current-sharing solutions. In order to achieve voltage stress suppression under high current conditions, the parasitic parameters, especially parasitic inductance in a high-current ETO switch module are studied. The Partial Element Equivalent Circuit (PEEC) method is used to extract the parasitics. Combined with the developed device model, the electrical interactions among multiple ETOs are investigated which results in structural modification for the solid-state DC switch module. The electro-thermal model of the DC switch module and the heatsink subsystem is used to identify the "thermal runaway" phenomenon in the module that is caused by the negative temperature coefficient of the ETO's conduction drop. The comparative study of the electro-thermal coupling identifies a strongly-coupled thermal network that increases the stability of the thermal subsystem. The electro-thermal model is also used to calculate the DC and transient thermal limit of the DC switch module. The high-current (5000A) DC switch module coupled with a solid state tripping unit is successfully applied as a high-speed, high-current solid-state DC circuit breaker. The experimental demonstration of a 5000A current interruption shows an interruption time of about 5 microseconds. This high-speed, high-current DC switch module can therefore be used in DC circuit breaker applications as well as other types of application, such as AC circuit breakers, transfer switches and fault current limiters. Since the novel solid-state DC circuit breaker is able to extinguish the fault current even before it reaches an uncontrollable level, this feature provides a fast-acting, current-limiting protection scheme for power systems that is not possible with traditional circuit breakers. The potential impact on the power system is also discussed in this dissertation.
Ph. D.
APA, Harvard, Vancouver, ISO, and other styles
2

Pala, Lukáš. "Návrh stykače VN pro trakční účely." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2021. http://www.nusl.cz/ntk/nusl-442797.

Full text
Abstract:
In the introduction a traction circuit is analyzed with different types of electric devices. The thesis describes power railway electric circuits, their loads and types of used contactors. Railway standards chapter summarizes requirements of standards for railway contactors. Follows literature focusing on power current switching and power switching devices design. Based on previous, a design procedure is developed for railway MV contactor in accordance with end-user and standards requirements. Thesis closes with pre-designing a railway contactor by calculating electrodynamic forces, heatflow and mechanical components.
APA, Harvard, Vancouver, ISO, and other styles
3

Punčochář, Marek. "Výpočet dynamických sil na proudovodné dráze jističe 160 A." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-220917.

Full text
Abstract:
This work deals with the calculation of forces acting on a current carrying path breakers, namely op type BC160 fy Letohrad. There is described the principle of electrodynamic forces and calculation of these forces for different current carrying path. Finally, a simplified model is created by using a circuit breaker simulation program and then forces that arise during the passage of a current are calculated.
APA, Harvard, Vancouver, ISO, and other styles
4

Konšel, Ladislav. "Simulace dynamického chování vybavovače jističe." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2012. http://www.nusl.cz/ntk/nusl-219754.

Full text
Abstract:
This work includes the theory of circuit breaker construction and is focused mainly on overload function. It mainly deals with electronic circuit breakers, i.e. equipped with an electronic trip unit. The work is focused on the part of trip unit - maglatch of trip unit. For the purposes of simulation, the geometric model is created. Maxwell program is used for the simulation. The work describes the options for conditions input which are necessary for simulation. Using the distribution of magnetic field intensity and magnetic flux density in the section of trip unit maglatch is determined by the simulation. Furthermore, the force effects acting on the armature of the maglatch are calculated. Force values and the directions acting on the armature are determined by changing the simulation parameters - shift of the armature and coil current. Simulations are performed both for steady-state and for dynamic simulation – movement of armature is taken into account. The supply source for the maglatch is created by an external circuit.
APA, Harvard, Vancouver, ISO, and other styles
5

Langlois, Yilin. "Modélisation de l’arc électrique dans un disjoncteur à vide." Thesis, Vandoeuvre-les-Nancy, INPL, 2010. http://www.theses.fr/2010INPL062N/document.

Full text
Abstract:
Un modèle numérique d’un arc électrique diffus dans un disjoncteur à vide à champ magnétique axial (AMF) a été développé dans le but de mieux comprendre à terme la transition d’un mode de fonctionnement diffus de l’arc vers un mode plus concentré. Le comportement du plasma d’arc a été simulé depuis la sortie de la zone de mélange cathodique jusqu’à l’entrée de la gaine anodique. Le modèle bidimensionnel est basé sur un système d’équations hydrodynamiques à deux fluides non magnétisés (ions et électrons), incluant les équations de conservation d’énergie ionique et électronique. Il est démontré que les processus d’ionisation et de recombinaison et les effets visqueux sont négligeables. Les transferts radiatifs ne sont pas considérés en première approximation. Outre les forces dues au champ AMF, le modèle inclut les forces dues aux trois composantes du champ magnétique induit par l’arc. Deux régimes d’écoulement des ions, supersonique (aux faibles densités de courant) et subsonique (aux fortes densités de courant), sont considérés. Près de la cathode, les conditions aux limites sont spécifiées à partir de résultats de la littérature. A proximité de l’anode, elles sont basées sur une description simplifiée de la gaine anodique. Les résultats de simulation présentés mettent en évidence une constriction du courant et un comportement différent des ions aux faibles et aux fortes densités de courant, et renseignent sur l’influence de divers paramètres (intensité du courant, distance interélectrode). Ce travail présente également une étude expérimentale, basée sur des visualisations par vidéo rapide de l’arc et des mesures pyrométriques de la température de la surface de l’anode
A model of a diffuse arc in a vacuum circuit breaker with an axial magnetic field (AMF) has been developed with the ultimate aim to better understand the transition of the arc from a diffuse mode to a more confined mode. The interelectrode plasma is simulated from the exit of the mixing region on the cathode side to the entrance of the anode sheath. The two-dimensional model is based on the solution of a system of two-fluid (ions and electrons) hydrodynamic equations, including in particular the energy balance equations relative to both the ions and the electrons, which are treated as non-magnetized particles. It is demonstrated that ionisation and recombination processes, as well as viscous effects, can be neglected. Radiation losses are not taken into account in a first approximation. In addition to the forces due to the AMF, the model considers the forces created by the three components of the magnetic field induced by the arc current. The possibility of both supersonic (at low current density) and subsonic (at high current density) ionic flow regimes is considered. On the cathode side, the boundary conditions are specified using results from the literature. On the anode side, they are based on a simplified description of the anode sheath. The simulation results presented show a constriction of the current lines, emphasize the differences in the behaviour of the ions at low and high current densities, and provide some insight on the influence of various operating parameters (arc current, gap length). The present work comprises also an experimental study, based on high-speed camera visualisations of the arc and measurements of the temperature at the anode surface
APA, Harvard, Vancouver, ISO, and other styles
6

Cavallera, Didier. "Contribution au renvoi de tension et à la reconstitution du réseau. Identification des paramètres d'un réseau. Estimation des flux rémanents dans un transformateur." Phd thesis, Université de Grenoble, 2011. http://tel.archives-ouvertes.fr/tel-00732191.

Full text
Abstract:
Lors de la réalimentation des auxiliaires d'une tranche nucléaire, l'étape la plus à risque est la remise sous tension brusque du transformateur à cause des surtensions. Dans un soucis perpétuel d'amélioration de la modélisation de ces transitoires, les modèles et techniques doivent évoluer. Le but de ces travaux de thèse est de proposer de nouvelles méthodologies permettant d'évaluer les paramètres mal connus de la modélisation. Lors des mises sous tension des lignes électriques, une méthodologie s'appuyant sur l'identification (optimisation ou techniques issues du traitement du signal) permet de déterminer les paramètres variables de la modélisation. Cependant, un des paramètres influents pour les surtensions est le flux rémanent. Face aux problèmes actuels rencontrés pour l'estimer (méthode non directe, dérive, ...), une nouvelle méthode basée sur la mesure des flux de fuites du circuit magnétique est proposée. Des mesures réelles utilisant des capteurs de technologie " fluxgate " sont réalisées et permettent d'estimer le flux rémanent.
APA, Harvard, Vancouver, ISO, and other styles
7

Tezenas, du Montcel Benoît. "Étude expérimentale et modélisation d’un plasma de vapeurs métalliques dans une ampoule à vide pour le développement de disjoncteurs Haute-Tension." Thesis, Université de Lorraine, 2018. http://www.theses.fr/2018LORR0110.

Full text
Abstract:
Dans le cadre d’un projet étudiant la possibilité de remplacer le SF6 par du vide comme milieu de coupure dans les disjoncteurs Haute-Tension, un travail ayant pour objet d’acquérir une meilleure compréhension du comportement d’un arc de vapeurs métalliques à grandes distances inter-électrodes (> 10 mm) et contrôlé par un champ magnétique axial (AMF) a été entrepris. Ce travail a premièrement donné lieu à l’élaboration d’une expérience au cours de laquelle des arcs, créés entre deux contacts en CuCr25 fixes, ont été visualisés par vidéo rapide dans une maquette démontable d’ampoule à vide. Différents types de régime d’arc ont été observés. En outre, à l’aide d’une méthode numérique de détection des spots cathodiques, nous avons pu étudier l’évolution de la distribution spatiale des spots cathodiques, mesurer l’intensité moyenne du courant porté par un spot et déterminer le profil radial moyen de la densité de courant cathodique. Cette thèse a aussi eu pour objet le développement d’un modèle magnétohydrodynamique à 2 fluides, 2D-axysimétrique et quasi-stationnaire, de la zone d’écoulement hydrodynamique de l’arc, permettant de traiter le cas des régimes d’arc diffus supersonique et diffus subsonique. Ce modèle a permis d’étudier le comportement du plasma d’arc en fonction des intensités du courant d’arc et de l’AMF et de la distance inter-électrodes
In the frame of a project investigating the possibility to replace SF6 by vacuum as a breaking medium in High-Voltage circuit breakers, a study that focusses on acquiring a better understanding of the behavior of a metal vapor arc at long contact gap (> 10 mm) and controlled by an axial magnetic field (AMF) has been undertaken. The study involves first the building of an experimental setup where arcs, created between two fixed CuCr25 contacts, were visualized using a high-speed camera in a vacuum demountable chamber. Various types of arc regime have been observed. Moreover, by means of a numerical method of detection of the cathode spots, we were able to study the evolution of the spatial distribution of the cathode spots, to measure the average current carried by a spot and to determine the average radial profile of the current density at the cathode surface. This study had also for object the development of a 2D-axisymetric and quasi-steady magnetohydrodynamic model of the hydrodynamic flow region of the arc based on a two-fluid approach. The model allows to simulate the supersonic and the subsonic diffuse arc regimes. It is used to study the arc behavior as a function of to the arc current, the AMF intensity and the contact gap
APA, Harvard, Vancouver, ISO, and other styles
8

Bissal, Ara. "Modeling and Verification of Ultra-Fast Electro-Mechanical Actuators for HVDC Breakers." Doctoral thesis, KTH, Elektroteknisk teori och konstruktion, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-162921.

Full text
Abstract:
The continuously increasing demand for clean renewable energy has rekindled interest in multi-terminal high voltage direct current (HVDC) grids. Although such grids have several advantages and a great potential, their materialization has been thwarted due to the absence of HVDC breakers. In comparison with traditional alternating current (AC) breakers, they should operate and interrupt fault currents in a time frame of a few milliseconds. The aim of this thesis is focused on the design of ultra-fast electro-mechanical actuator systems suitable for such HVDC breakers.Initially, holistic multi-physics and hybrid models with different levels of complexity and computation time were developed to simulate the entire switch. These models were validated by laboratory experiments. Following a generalized analysis, in depth investigations involving simulations complemented with experiments were carried out on two of the sub-components of the switch: the ultra-fast actuator and the damper. The actuator efficiency, final speed, peak current, and maximum force were explored for different design data.The results show that models with different levels of complexity should be used to model the entire switch based on the magnitude of the impulsive forces. Deformations in the form of bending or elongation may deteriorate the efficiency of the actuator losing as much as 35%. If that cannot be avoided, then the developed first order hybrid model should be used since it can simulate the behavior of the mechanical switch with a very good accuracy. Otherwise, a model comprising of an electric circuit coupled to an electromagnetic FEM model with a simple mechanics model, is sufficient.It has been shown that using a housing made of magnetic material such as Permedyn, can boost the efficiency of an actuator by as much as 80%. In light of further optimizing the ultra-fast actuator, a robust optimization algorithm was developed and parallelized. In total, 20520 FEM models were computed successfully for a total simulation time of 7 weeks. One output from this optimization was that a capacitance of 2 mF, a charging voltage of 1100 V and 40 turns yields the highest efficiency (15%) if the desired velocity is between 10 m/s and 12 m/s.The performed studies on the passive magnetic damper showed that the Halbach arrangement gives a damping force that is two and a half times larger than oppositely oriented axially magnetized magnets. Furthermore, the 2D optimization model showed that a copper thickness of 1.5 mm and an iron tube that is 2 mm thick is the optimum damper configuration.

QC 20150422

APA, Harvard, Vancouver, ISO, and other styles
9

Zheng, Yu-Hong, and 鄭裕弘. "Dynamic Analysis of Operating Mechanism and Optimal Design of Permanent Magnetic Actuator in Permanent Magnetic Vacuum Circuit Breaker." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/jk2tee.

Full text
Abstract:
碩士
國立高雄應用科技大學
機械與精密工程研究所
104
The vacuum circuit breaker (VCB) act as an interrupter switch in electric power loop to prevent the disaster caused by overload or short circuit. The VCB can divide into several components, including vacuum interrupter (VI), actuating mechanism and permanent magnetic actuator (PMA).The VI has different specification by applied voltage grade. While the two contacts separating, the magnetic field usually occurred between contacts in high voltage and high current, it makes unstable and degrade the performance of the breaker. In this research, the theorem of Euler-Lagrange Dynamic, conservation of linear momentum and impact of dynamics were applied to analyze the loading characteristic of operating linkages, velocity of movable contact and generating required magnetic force of the PMA in the closing duration. In other hands, the equivalent magnetic circuit methods were applied to analysis the equation between reluctance and magnetomotive force (m.m.f). The simulations of dynamic characteristic of operating mechanism and exciting magnetic force due to the mono-stable PMA were simulated by ADAMS/View and COMSOL Multiphysics, respectively. The algorithm of differential evolution (DE) was applied to optimize the geometric dimension of PMA, aim to reducing material using and total volume but having the same performance with the original design. The results of this study provide a reference for improving the design of operating mechanism, the performance of VCB and the design for required electric circle of the armature.
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Magnetic circuit breaker"

1

Nitu, Smaranda, Dan Pavelescu, Constantin Nitu, Gheorghe Dumitrescu, and Paula Anghelita. "Upon the Interaction between Magnetic Field and Electric Arc in Low Voltage Vacuum Circuit Breakers." In Scientific Computing in Electrical Engineering, 73–79. Berlin, Heidelberg: Springer Berlin Heidelberg, 2007. http://dx.doi.org/10.1007/978-3-540-71980-9_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Magnetic circuit breaker"

1

Mifune, T., and K. Nishimura. "Seismic circuit breaker with electromagnetic contactor." In 2018 IEEE International Magnetic Conference (INTERMAG). IEEE, 2018. http://dx.doi.org/10.1109/intmag.2018.8508091.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Gao, Lei, Bin Xiang, Kun Yang, Zhiyuan Liu, Yingsan Geng, Jianhua Wang, and Satoru Yanabu. "The comparison of DC semiconductor circuit breaker and SF6 circuit breaker with transverse magnetic field for DC transmission." In 2017 4th International Conference on Electric Power Equipment - Switching Technology (ICEPE-ST). IEEE, 2017. http://dx.doi.org/10.1109/icepe-st.2017.8188885.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wang, Yongxing, Yang Liu, Yan Mu, Xujing Zhao, Zhihui Huang, and Jiyan Zou. "Reliability assessment of permanent magnetic actuator for vacuum circuit breaker." In 2015 3rd International Conference on Electric Power Equipment - Switching Technology (ICEPE-ST). IEEE, 2015. http://dx.doi.org/10.1109/icepe-st.2015.7368369.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Xu, Jiayuan, Peng Zhang, Yuan Deng, Enyuan Dong, Yu Tian, Yu Cong, and Kexin Tian. "A new electro magnetic force actuator for 126kV vacuum circuit breaker." In 2017 4th International Conference on Electric Power Equipment - Switching Technology (ICEPE-ST). IEEE, 2017. http://dx.doi.org/10.1109/icepe-st.2017.8188934.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Anji, H., Y. Sato, S. Yanabu, T. Akasu, and N. Takao. "Axial magnetic field electrode is preferbility high-voltage vacuum circuit breaker." In 2011 1st International Conference on Electric Power Equipment - Switching Technology (ICEPE-ST). IEEE, 2011. http://dx.doi.org/10.1109/icepe-st.2011.6122935.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Zhiyuan Cai, Shaohua Ma, and Jimei Wang. "An approach of improve permanent magnetic actuator of vacuum circuit breaker." In 2008 XXIII International Symposium on Discharges and Electrical Insulation in Vacuum (ISDEIV 2008). IEEE, 2008. http://dx.doi.org/10.1109/deiv.2008.4676745.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Xiong, Dezhi, Xiaoping Liu, and Xiangqun Chen. "Optimization Design of Anti-Strong Magnetic Interference for Intelligent Miniature Circuit Breaker." In 2018 2nd IEEE Conference on Energy Internet and Energy System Integration (EI2). IEEE, 2018. http://dx.doi.org/10.1109/ei2.2018.8582480.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Wang, Fa, and Lan Song. "A New Permanent Magnetic Operating Mechanism for Bi-Stable Vacuum Circuit Breaker." In 2011 Asia-Pacific Power and Energy Engineering Conference (APPEEC). IEEE, 2011. http://dx.doi.org/10.1109/appeec.2011.5748507.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Pellegrin, H., J. Y. Trepanier, R. Camarero, and X. Zhang. "The influence of the self-induced magnetic field in circuit breaker arcs." In 34th Aerospace Sciences Meeting and Exhibit. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1996. http://dx.doi.org/10.2514/6.1996-831.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Wu, Yi, Yang Hu, Mingzhe Rong, Yifei Wu, Shehr Yar Aziz, and Qiang Yi. "Investigation of a magnetic induction current commutation module for DC circuit breaker." In 2017 4th International Conference on Electric Power Equipment - Switching Technology (ICEPE-ST). IEEE, 2017. http://dx.doi.org/10.1109/icepe-st.2017.8188888.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Magnetic circuit breaker' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography