Journal articles: 'Macroporous Particle-Polymer'

1

Li, Zifu, and To Ngai. "Macroporous Polymer from Core−Shell Particle-Stabilized Pickering Emulsions." Langmuir 26, no. 7 (April 6, 2010): 5088–92. http://dx.doi.org/10.1021/la903546g.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Milošević, M., N. Pejić, Ž. Čupić, S. Anić, and Lj Kolar-Anić. "Examinations of Cross-Linked Polyvinylpyridine in Open Reactor." Materials Science Forum 494 (September 2005): 369–74. http://dx.doi.org/10.4028/www.scientific.net/msf.494.369.

Full text

Abstract:

Macroporous cross-linked copolymer of 4-vinylpyridine and 25% (4:1) divinylbenzene is analyzed under open conditions, that is in a continuous well-stirred tank reactor (CSTR). With this aim the appropriate bifurcation diagram is found and the behavior of the system with and without polymer in the vicinity of the bifurcation point is used for the polymer examinations. Two different granulations of polymer are considered. Moreover, some physicochemical characteristics of the polymer, such as specific surface area, skeletal and particle density, are determined.

APA, Harvard, Vancouver, ISO, and other styles

3

Wang, Qiang, Shi Dong Wang, Hui Min Zhao, and Shu Liang Zang. "Synthesis and Characterization of Rhenium Concerned Macroporous Adsorption Resin Microspheres." Advanced Materials Research 1048 (October 2014): 511–14. http://dx.doi.org/10.4028/www.scientific.net/amr.1048.511.

Full text

Abstract:

The macroporous resin is one kind of new non-ionic organic high polymer absorbent with nearly 20 years development. It takes the styrene and the acrylic ester as the monomer, divinyl benzene as the crosslinking agent, the toluene and the xylene as aperture reagents. They intersectantly linked the polymerization to form the porous skeleton structure mutually. This experiment is the utilization of aerosol polymerization method in preparation of rhenium concerned polymeric adsorbent. On research of monomer and crosslinking agent allocated proportion, dispersing agent amount used, temperature and mixing speed control, the different monomer and the crosslinking agent separately affected the synthesis different macroporous polymeric adsorbent. Also we investigated the adsorption performance quality of the different macroporous polymeric adsorbent in order to make the best particle size.

APA, Harvard, Vancouver, ISO, and other styles

4

Li, Zifu, and To Ngai. "Correction to Macroporous Polymer from Core−Shell Particle-Stabilized Pickering Emulsions." Langmuir 26, no. 20 (October 19, 2010): 16186. http://dx.doi.org/10.1021/la1034118.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Deng, Qin, James R. Hahn, Jennifer Stasser, Jeremy D. Preston, and Gary T. Burns. "Reinforcement of Silicone Elastomers with Treated Silica Xerogels: Silica—Silicone IPNs." Rubber Chemistry and Technology 73, no. 4 (September 1, 2000): 647–65. http://dx.doi.org/10.5254/1.3547611.

Full text

Abstract:

Abstract The use of silylated xerogels as reinforcing fillers in silicone elastomers was investigated. The silylated xerogels used in this study were mesoporous solids with a high degree of surface treatment and an open, interconnected high porosity. Some macropores were also present in the original xerogel particle. During compounding the original size of the xerogel particles is reduced substantially by fracture through the macroporous regions. The mesoporous regions of the xerogel are retained and exist as a uniform dispersion of filler particles in the siloxane polymer phase. The absence of a bound rubber phase, and the presence of an open porosity in the xerogel suggests reinforcement occurs via a silica—silicone interpenetrating network. This creates additional chain restrictions which lead to increases in modulus and other mechanical properties.

APA, Harvard, Vancouver, ISO, and other styles

6

Myronchuk, Valeriy, Yuliya Dzyazko, Yurii Zmievskii, Anatoliy Ukrainets, Alexander Bildukevich, Ludmila Kornienko, Ludmila Rozhdestvenskaya, and Alexey Palchik. "Organic-inorganic membranes for filtration of corn distillery." Acta Periodica Technologica, no. 47 (2016): 153–65. http://dx.doi.org/10.2298/apt1647153m.

Full text

Abstract:

Organic-inorganic membranes were obtained by modification of polymer microfiltration membrane with inorganic ion-exchangers, which form secondary porosity inside macroporous substrate (zirconium hydrophosphate) or simultaneously in the macroporous substrate and active layer, depending of the particle size (from ?50 nm up to several microns). Precipitation of the inorganic constituent is considered from the point of view of Ostwald-Freundlich equation. Such processes as pressing test in deionized water and filtration of corn distillery at 1-6 bar were investigated. Theoretical model allowing to establish fouling mechanism, was applied. It was found that the particles both in the substrate and active layer prevent fouling of the membrane with organics and provide rejection of colloidal particles.

APA, Harvard, Vancouver, ISO, and other styles

7

Lorenz, Marcel, Carolina Paganini, Giuseppe Storti, and Massimo Morbidelli. "Macroporous Polymer–Protein Hybrid Materials for Antibody Purification by Combination of Reactive Gelation and Click-Chemistry." Materials 12, no. 10 (May 14, 2019): 1580. http://dx.doi.org/10.3390/ma12101580.

Full text

Abstract:

Clickable core-shell nanoparticles based on poly(styrene-co-divinylbenzene-co-vinylbenzylazide) have been synthesized via emulsion polymerization. The 38 nm sized particles have been swollen by divinyl benzene (DVB) and 2,2’-azobis(2-methylpropionitrile) (AIBN) and subsequently processed under high shear rates in a Z-shaped microchannel giving macroporous microclusters (100 µm), through the reactive gelation process. The obtained clusters were post-functionalized by “click-chemistry” with propargyl-PEG-NHS-ester and propargylglicidyl ether, yielding epoxide or NHS-ester activated polymer supports for bioconjugation. Macroporous affinity materials for antibody capturing were produced by immobilizing recombinant Staphylococcus aureus protein A on the polymeric support. Coupling chemistry exploiting thiol-epoxide ring-opening reactions with cysteine-containing protein A revealed up to three times higher binding capacities compared to the protein without cysteine. Despite the lower binding capacities compared to commercial affinity phases, the produced polymer–protein hybrids can serve as stationary phases for immunoglobulin affinity chromatography as the materials revealed superior intra-particle mass transports.

APA, Harvard, Vancouver, ISO, and other styles

8

Lamprou, Alexandros, Itır Köse, Zoé Peña Aguirre, Giuseppe Storti, Massimo Morbidelli, and Miroslav Soos. "Macroporous Polymer Particles via Reactive Gelation under Shear: Effect of Primary Particle Properties and Operating Parameters." Langmuir 30, no. 46 (November 12, 2014): 13970–78. http://dx.doi.org/10.1021/la502153j.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Boehm, Anna K., Emanuel Ionescu, Marcus Koch, and Markus Gallei. "Combining Soft Polysilazanes with Melt-Shear Organization of Core–Shell Particles: On the Road to Polymer-Templated Porous Ceramics." Molecules 24, no. 19 (September 30, 2019): 3553. http://dx.doi.org/10.3390/molecules24193553.

Full text

Abstract:

The preparation of ordered macroporous SiCN ceramics has attracted significant interest and is an attractive area for various applications, e.g., in the fields of catalysis, gas adsorption, or membranes. Non-oxidic ceramics, such as SiCN, own a great stability based on the covalent bonds between the containing elements, which leads to interesting properties concerning resistance and stability at high temperature. Their peculiar properties have become more and more important for a manifold of applications, like catalysis or separation processes, at high temperatures. Within this work, a feasible approach for the preparation of ordered porous materials by taking advantage of polymer-derived ceramics is presented. To gain access to free-standing films consisting of porous ceramic materials, the combination of monodisperse organic polymer-based colloids with diameters of 130 nm and 180 nm featuring a processable preceramic polymer is essential. For this purpose, the tailored design of hybrid organic/inorganic particles featuring anchoring sites for a preceramic polymer in the soft shell material is developed. Moreover, polymer-based core particles are used as sacrificial template for the generation of pores, while the preceramic shell polymer can be converted to the ceramic matrix after thermal treatment. Two different routes for the polymer particles, which can be obtained by emulsion polymerization, are followed for covalently linking the preceramic polysilazane Durazane1800 (Merck, Germany): (i) Free radical polymerization and (ii) atom transfer radical polymerization (ATRP) conditions. These hybrid hard core/soft shell particles can be processed via the so-called melt-shear organization for the one-step preparation of free-standing particle films. A major advantage of this technique is the absence of any solvent or dispersion medium, enabling the core particles to merge into ordered particle stacks based on the soft preceramic shell. Subsequent ceramization of the colloidal crystal films leads to core particle degradation and transformation into porous ceramics with ceramic yields of 18–54%.

APA, Harvard, Vancouver, ISO, and other styles

10

Blanford, C. F., A. Stein, and C. B. Carter. "Electron Microscopy of Hierarchical Materials." Microscopy and Microanalysis 5, S2 (August 1999): 820–21. http://dx.doi.org/10.1017/s1431927600017426.

Full text

Abstract:

Recent innovations in materials chemistry have allowed the preparation of “hierarchical” ceramic and polymer materials that possess features on several different size scales. One of the newest hierarchical materials are ceramics that exhibit a three-dimensional ordered array of half-micron voids. These macroporous structures are synthesized from a liquid ceramic precursor and a polymer colloidal crystal template. This template is extracted by either thermal or chemical methods leaving a structure such as the porous zirconia particle shown in Fig. 1. The final structure of these materials may be thought of as the opposite of opal: the spheres here are the voids. Ordered arrays of dielectric material like these could potentially be used as photonic crystals that interact with visible light. For the microscopist, these materials create new opportunities to study interrelated aspects such as templating, crystallization, and phase transformations.Transmission electron microscopy (TEM) was carried out on a Philips CM30 TEM equipped with a LaB6 filament and operating at 300 kV.

APA, Harvard, Vancouver, ISO, and other styles

11

Papastergiou, Maria, Aspasia Kanellou, Despoina Chriti, Grigorios Raptopoulos, and Patrina Paraskevopoulou. "Poly(Urethane-Acrylate) Aerogels via Radical Polymerization of Dendritic Urethane-Acrylate Monomers." Materials 11, no. 11 (November 12, 2018): 2249. http://dx.doi.org/10.3390/ma11112249.

Full text

Abstract:

The purpose of this work was to investigate the effect of multifunctionality on material properties of synthetic polymer aerogels. For this purpose, we present the synthesis and characterization of monolithic dendritic-type urethane-acrylate monomers based on an aliphatic/flexible (Desmodur N3300), or an aromatic/rigid (Desmodur RE) triisocyanate core. The terminal acrylate groups (three at the tip of each of the three branches, nine in total) were polymerized with 2,2′-azobis(isobutyronitrile) (AIBN) via free radical chemistry. The resulting wet-gels were dried with supercritical fluid (SCF) CO2. Aerogels were characterized with ATR-FTIR and solid-state 13C NMR. The porous network was probed with N2-sorption and scanning electron microscopy (SEM). The thermal stability of aerogels was studied with thermogravimetric analysis (TGA). Most aerogels were macroporous materials (porosity > 80%), with high thermal stability (up to 300 °C). Aerogels were softer at low monomer concentrations and more rigid at higher concentrations. The material properties were compared with those of analogous aerogels bearing only one acrylate moiety at the tip of each branch and the same cores, and with those of analogous aerogels bearing norbornene instead of acrylate moieties. The nine-terminal acrylate-based monomers of this study caused rapid decrease of the solubility of the growing polymer and made possible aerogels with much smaller particles and much higher surface areas. For the first time, aliphatic/flexible triisocyanate-based materials could be made with similar properties in terms of particle size and surface areas to their aromatic/rigid analogues. Finally, it was found that with monomers with a high number of crosslinkable groups, material properties are determined by multifunctionality and thus aerogels based on 9-acrylate- and 9-norbornene-terminated monomers were similar. Materials with aromatic cores are carbonizable with satisfactory yields (20–30% w/w) to mostly microporous materials (BET surface areas: 640–740 m2 g−1; micropore surface areas: 360–430 m2 g−1).

APA, Harvard, Vancouver, ISO, and other styles

12

Nie, Xiangrong, Junbin Chen, Yi Cao, Jinyuan Zhang, Wenjing Zhao, Yanlong He, Yunyi Hou, and Shaomin Yuan. "Investigation on Plugging and Profile Control of Polymer Microspheres as a Displacement Fluid in Enhanced Oil Recovery." Polymers 11, no. 12 (December 2, 2019): 1993. http://dx.doi.org/10.3390/polym11121993.

Full text

Abstract:

Polymer microspheres (PMs) are used as a new material to recover residual oil left in unswept oil areas after secondary recovery methods. The fact that the PMs plug the macropores causes the flow direction of the injection fluid to be transferred from macropores to micropores. In order to investigate the plugging and profile control mechanisms of PMs in reservoirs, four kinds of PMs with different particle sizes and four kinds of artificial cores with different permeability were selected for flooding tests, including plugging experiments and profile control experiments. The pore throat size distribution of cores was characterized by nuclear magnetic resonance (NMR) technology. The particle size distribution of PMs used in the experiment was characterized using a laser particle size analyzer. The results showed that there are six matching relationships existing simultaneously between pore throats and PMs based on theoretical analysis, which are completely plugging, single plugging, bridge plugging, smooth passing, deposition, and deformable passing. A key principle for optimizing PMs in profile control is that the particle size of the selected PMs can enter the high permeability layer well, but it is difficult for it to enter the low permeability layer. The results of this paper provide a theoretical basis for the optimal particle size of PMs during the oil field profile control process.

APA, Harvard, Vancouver, ISO, and other styles

13

Ciurans Oset, Marina, Jan Nordin, and Farid Akhtar. "Processing of Macroporous Alumina Ceramics Using Pre-Expanded Polymer Microspheres as Sacrificial Template." Ceramics 1, no. 2 (November 6, 2018): 329–42. http://dx.doi.org/10.3390/ceramics1020026.

Full text

Abstract:

Shaped porous ceramics have proven to be the most adapted materials for several industrial applications, both at low and high temperatures. Recent research has been focused on developing shaping techniques, allowing for a better control over the total porosity and the pores characteristics. In this study, macroporous alumina foams were fabricated by gel-casting using pre-expanded polymeric microspheres with average sizes of 40 μm, 20 μm, and 12 μm as sacrificial templates. The gel-casting method, as well as the drying, debinding, and presintering conditions were investigated and optimized to process mechanically strong and highly porous alumina scaffolds. Furthermore, a reliable model relating the amount of pre-expanded polymeric microspheres and the total porosity of the presintered foams was developed and validated by mercury intrusion porosimetry measurements. The electron microscopy investigation of the presintered foams revealed that the size distribution and the shape of the pores could be tailored by controlling the particle size distribution and the shape of the wet pre-expanded microspheres. Highly uniform and mechanically stable alumina foams with bimodal porosity ranging from 65.7 to 80.2 vol. % were processed, achieving compressive strengths from 3.3 MPa to 43.6 MPa. Given the relatively open pore structure, the pore size distribution, the presintered mechanical strength, and the high porosity achieved, the produced alumina foams could potentially be used as support structures for separation, catalytic, and filtration applications.

APA, Harvard, Vancouver, ISO, and other styles

14

Albuszis, Marco, Peter J. Roth, Werner Pauer, and Hans-Ulrich Moritz. "Macroporous uniform azide- and alkyne-functional polymer microspheres with tuneable surface area: synthesis, in-depth characterization and click-modification." Polym. Chem. 5, no. 19 (2014): 5689–99. http://dx.doi.org/10.1039/c4py00709c.

Full text

Abstract:

With surface areas of up to 467 m² g⁻¹, crosslinked azide- and alkyne-functional poly(styrene-co-divinylbenzene) microparticles enable versatile modification throughout the particle.

APA, Harvard, Vancouver, ISO, and other styles

15

Xue, Ming, Jun Ou, Da Li Zhou, Dange Feng, Wei Zhong Yang, Guanda Li, Dan Ping Liu, and Yan Song Wang. "Preparation and Properties of Porous Apatite-Wollastonite Bioactive Glass-Ceramic." Key Engineering Materials 330-332 (February 2007): 169–72. http://dx.doi.org/10.4028/www.scientific.net/kem.330-332.169.

Full text

Abstract:

The porous apatite-wollastonite bioactive glass-ceramic (AW-GG) was made from nano-precursor powders derived from sol-gel process, and shaped by dipping method with polymer foam. The physical-chemical properties, bioactivity and biocompatibility of the materials were studied by means of TG, XRD, SEM, TEM and so on. The bioactivity was investigated in simulated body fluid (SBF) and the biocompatibility was evaluated by co-culturing with marrow stromal cells (MSCs). The result shows that: the particle size of the AW precursor powders is 40~100nm; porous AW GC has three-dimensional pored structure with 300~500um macropores and 2~5um micropores; the materials possess high bioactivity and biocompatibility. Porous AW GC may therefore have great potential application as bone tissue engineering scaffold.

APA, Harvard, Vancouver, ISO, and other styles

16

Miyao, Toshihiro, Hanako Nishino, Hiroko Yamazaki, Satoko Sato, Kayoko Tamoto, Makoto Uchida, Akihiro Iiyama, Kazuya Shibanuma, and Naoto Koizumi. "Catalytic Activity for ORR of Pt Supported on Ordered Mesoporous Carbon with Network Structure." ECS Meeting Abstracts MA2022-02, no. 42 (October 9, 2022): 1578. http://dx.doi.org/10.1149/ma2022-02421578mtgabs.

Full text

Abstract:

Introduction In order to realize carbon neutrality, working toward becoming a hydrogen-based society using renewable energy is essential, and hydrogen fuel cell vehicles will be one of the key devices. For further widespread deployment of fuel cell vehicles, cost reduction and performance enhancement of polymer electrolyte fuel cell (PEFC) systems are urgently needed. Recently, Pt/C-based electrocatalysts using mesoporous carbon as a support material have attracted attention, because well-designed mesopores can act as “accessible pores,” in which direct contact between ionomer and Pt surface is avoided, while the transport of protons, oxygen and generated water is not suppressed. Ordered mesoporous carbon (OMC) with a uniform nanopore structure is one of the ideal candidate materials for a catalyst support with accessible pores. However, with conventional synthesis methods, the typical OMC primary particle size is on the order of micrometers, and mass transport within the nanopores could be a difficult issue. In the present study, we focused on the development of OMC nanoparticles with a network structure. By use of nonionic surfactant micelles with phenol-formaldehyde resole resin as a carbon source, we obtained OMC nanoparticles with a novel hierarchical network structure (ns-OMC). To the best of our knowledge, there are no reports of the synthesis of ordered mesoporous carbon nanoparticles with a rigid network structure. In this study, in addition to the effect of synthesis conditions on the ns-OMC structure, a newly developed technique for the selective deposition of Pt nanoparticles within the ns-OMC nanopores, and the ORR activity of the Pt/ns-OMC catalysts, will be discussed in detail. Experimental Ns-OMC powder was synthesized with resol-nonionic surfactant micelles as a carbon source and structure directing agent. Resol-F127 (nonionic surfactant) micelles were synthesized by mixing phenol, formaldehyde, water and F127 with sodium hydroxide. After hydrothermal treatment of the mixture, the resulting solid was filtered and washed thoroughly and dried under vacuum. The obtained powder was carbonized at 700 ºC followed by annealing at 1000 ºC. Pt was deposited on the ns-OMC powder by the reverse micelle and colloid techniques. Cyclic voltammetry and linear sweep voltammetry were carried out in N2-saturated and O2-saturated 0.1 M HClO4 solution at 25 ºC using the conventional rotating disk electrode (RDE) technique. Potential step cycling measurements simulating load cycling between 0.6 V and 1.0 V vs. RHE were carried out according to the FCCJ protocol. Coating of the catalyst on a glassy carbon disk substrate was carried out by an electrospray (ES) coating technique developed by our group [1]. N2 adsorption measurement at liquid nitrogen temperature was carried out. The morphology of the Pt/ns-OMC was observed by scanning transmission electron microscope (STEM). Results and discussion As seen in the STEM images of the ns-OMC powder (Figure 1), the network structure formed by connection of OMC primary nanoparticles to form developed macropores is clearly observed. The OMC nanoparticles were tightly connected via a thick necking structure. The primary particle size of the OMC and neck thickness were controllable via the resol-F127 micelle concentration and the temperature during the hydrothermal treatment. Highly ordered nanopores were observed on the surface of the OMC particles, with a pore size of ca. 5 nm and an interpore distance of ca. 8 nm. The nanopores and the network structure were stable even after high temperature annealing at 1400 ºC. The BET specific surface area for the ns-OMC annealed at 1000 ºC was 814 m2 g-1, and the BJH pore size distribution curve of the ns-OMC showed a mesopore peak at 4.5 nm, which is in good agreement with the STEM observation. When Pt was deposited on the ns-OMC support, most of the Pt particles, with diameters of 4 to 5 nm, were dispersed on the support and, interestingly, located inside or right above the nanopore entrances. Careful STEM measurements revealed that the Pt particles were not deposited deeply within the OMC nanopores, but most were deposited at relatively shallow positions. RDE measurements revealed that the Pt/ns-OMC catalysts showed higher specific activity and mass activity for the ORR and much higher stability for the ECSA values during potential step cycling measurements in comparison with a commercial Pt/CB catalyst. The higher catalytic activity and durability observed for the Pt/ns-OMC catalyst may be due to a near-ideal distance between neighboring Pt particles deposited on the novel support. Aggregation and sintering of the Pt particles were successfully suppressed due to the nanopore structure. [1] S. Cho, K. Tamoto and M. Uchida, Energy Fuels, 34, 14853 (2020). Acknowledgement: This work was supported by the ECCEED’30-FC project from NEDO. Figure 1

APA, Harvard, Vancouver, ISO, and other styles

17

Samatya Ölmez, Saba, Didem Kökden, and Ali Tuncel. "The Novel Polymethacrylate Based Hydrophilic Stationary Phase for Ion Chromatography." Journal of Chromatographic Science, April 15, 2022. http://dx.doi.org/10.1093/chromsci/bmac034.

Full text

Abstract:

Abstract Ion chromatography is widely used as a useful and powerful tool for the analysis of anionic and cationic components found in waters and aqueous media. The performance and selectivity of ion chromatography are based on the stationary phase column packed material. In this study, it is aimed to develop new column material with quaternary ammonium functional group based on monodisperse polymeric particles for ion chromatography and to investigate their chromatographic performance. For the analysis of inorganic anions by ion chromatography, new stationary phases macroporous monodisperse particles based on 3-chloro-2-hydroxy propylmethacrylate-co-ethylene dimethacrylate are obtained as column packing material. 3-chloro-2-hydroxy propylmethacrylate and ethylene glycol dimethacrylate are transformed to porous monodisperse particle form by using glycidyl methacrylate as the seed latex and ethyl benzene as the porogen solvent via micro-suspension polymerization technique. Then macroporous monodisperse particles surface is functionalized by triethylamine so strong anion exchange is obtained for ion chromatography packing material. A series of stationary phases prepared from polymer particles containing different amounts of porogen solvent were tested. The results show that column packing material is successful to separate inorganic anions mixture such as F−, Cl−, NO2−, Br−, NO3− by using the carbonate and bicarbonate solutions as mobile phases.

APA, Harvard, Vancouver, ISO, and other styles

18

GRAMA, S., and D. HORÁK. "Preparation of Monodisperse Porous Silica Particles Using Poly(Glycidyl Methacrylate) Microspheres as a Template." Physiological Research, September 14, 2015, S11—S17. http://dx.doi.org/10.33549/physiolres.933135.

Full text

Abstract:

Monodisperse macroporous poly(glycidyl methacrylate) (PGMA) microspheres were used as a template for preparing porous silica particles. The starting polymer microspheres that were 9.3 μm in size were synthesized by multistep swelling polymerization using a modified Ugelstad technique. Subsequently, silica (SiO2) was deposited on the surface and inside the PGMA microspheres to produce poly(glycidyl methacrylate)-silica hybrid particles (PGMA-SiO2). Upon calcination of the PGMA-SiO2 microspheres, porous silica particles were formed. The morphology, particle size, polydispersity and inner structure of the silica microspheres were investigated by scanning and transmission electron microscopy. Thermogravimetric analysis and dynamic adsorption of nitrogen determined the amount of silica formed and its specific surface area. Compared with the starting PGMA microspheres, the size of the porous silica particles decreased by up to 30 %. These porous silica microspheres are promising for chromatography and biomedical applications.

APA, Harvard, Vancouver, ISO, and other styles

19

Yan, Xiaowei, Jingdai Wang, Yibin Shan, Yongrong Yang, and Chao He. "Infinite dilution diffusion coefficients of organic solvents in nascent polyethylene particles by inverse gas chromatography measurements." e-Polymers 7, no. 1 (December 1, 2007). http://dx.doi.org/10.1515/epoly.2007.7.1.148.

Full text

Abstract:

AbstractDiffusion coefficients of four organic solvents: dichloromethane, trichloromethane, tetrachloromethane and n-hexane in polyethylene particles at infinite dilution were determined by use of inverse gas chromatography (IGC). The polymer particles were used as supplied by the producer to pack the chromatographic columns. This allowed a direct measurement of the interested properties in a particle with the same morphology obtained at the reactor outlet. The particle morphology was investigated and classical mathematical model for chromatographic process was adopted based upon the analysis of particle microstructure. It was found that the limitation step for mass transfer was in the polymer matrix rather than in macropores, and when interpreted in terms of diffusion coefficients for spherical particles, the measured diffusion coefficients compared favourably with predicted values from literature relationships and free volume theory.

APA, Harvard, Vancouver, ISO, and other styles

Journal articles on the topic 'Macroporous Particle-Polymer'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles