Relevant bibliographies by topics / Lopatkování

Contents

  1. Journal articles
  2. Dissertations / Theses

Academic literature on the topic 'Lopatkování'

Author: Grafiati
Published: 28 June 2021
Last updated: 12 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Lopatkování.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Lopatkování"

1

Wagner, Roland. "A case of collision in principles of language description?" Prague Bulletin of Mathematical Linguistics 101, no. 1 (April 1, 2014): 123–46. http://dx.doi.org/10.2478/pralin-2014-0008.

Full text
Abstract:
Abstract In the article, I deal with an apparent case of incoherence within the framework of Functional Generative Description (FGD) in treating certain reflexive constructions. According to the principle that differences between valency frames are constitutive for establishing different lexical units (e.g., Žabokrtský and Lopatková, 2007), the occurrences of vnímat in (i) Vnímá syna jako soka and (ii) Sám se vnímá jako síla ochraňující divadlo have to be assigned to two different lexical units, as there is a difference in the formal marking of the Effect-argument (jako+accusative case in (i), jako+nominative case in (ii)). On the basis of the commutation test (e.g., Panevová, 2008) which identifies the reflexive clitic se in (ii) as an object-clitic, both occurrences of vnímat have to be, however, assigned to the same lexical unit as the only difference between vnímá syna in (i) and vnímá se in (ii) consists in the lexical filling of the object position. In the main part of the text, I review two different strategies to remedy the conflict between the two principles. I point out certain implications of both strategies and conclude by pleading for a solution within the framework of Modified Valency Theory (Karlík, 2000a)
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Lopatkování"

1

Holečková, Michaela. "Rekonstrukce parní kondenzační turbíny." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-254346.

Full text
Abstract:
The aim of this master thesis is the retrofit of a condensing steam turbine. The thesis obtains a revision of the steam turbine, the reconstruction of steam turbine blades and the basic calculation of bolt torques of the turbine split plane. The master thesis is assigned to a specific retrofit of the steam turbine Lang. In the introductory part the thesis is focused on the turbine description and the basic functions of selected turbine components. The following part deals with the revision and the proposal of repairs for all components and the recommendation of additional modernizations of specific measuring equipments. The analysis of anchoring the stator and rotor blading and their reconstruction is discussed in the next part. In the last part the thesis focuses on the sealing of the turbine split plane and the calculation of the various bolt torques closely linked to the sealing.
APA, Harvard, Vancouver, ISO, and other styles
2

Nytra, Petr. "Retrofit parní turbíny." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-443171.

Full text
Abstract:
Topic of this diploma thesis is thermodynamical recalculation of turbine TG3 for different parameters and new design of its blading. Introduction deals with theoretical basics of turbines and their components. Second part explains general reasons for retrofit and then specifically for Heating plant Olomouc, where TG3 is located. Third part includes used calculating methods and formulas. Last part presents results, which were calculated in software MS Excel. A cross section drawing is attachment of this thesis.
APA, Harvard, Vancouver, ISO, and other styles
3

Vymětalík, Zbyněk. "Kondenzační parní turbína." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378716.

Full text
Abstract:
The topic of this diploma thesis is a condensing steam turbine with one regulated steam extraction. The first part contents design and balance of heat scheme. The heat scheme is the basis for the main part of this work, which is the thermodynamic design of the turbine with reaction blades. At the end, the characteristics of the turbine are created. Drawing of the turbine section is attached to this thesis.
APA, Harvard, Vancouver, ISO, and other styles
4

Doseděl, Jakub. "Parní turbína pro biomasový blok." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417844.

Full text
Abstract:
The aim of this diploma thesis is a design of a condensing steam turbine based on technical specification of inlet steam - maximal mass flow 120 t/h, temperature 440 °C; on temperature in deaerator 125 °C; on mass flow 0 – 60 t/h and pressure 3,0 bar(a) of regulated steam extraction and on ambient temperature in the vicinity 25 °C. The result contains steam turbine with reaction blading, work output 28,76 MWe and efficiency 82 %.
APA, Harvard, Vancouver, ISO, and other styles
5

Biskup, Michal. "Parní turbína pro malý jaderný zdroj." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-443174.

Full text
Abstract:
This master´s thesis deals with the design of a steam turbine for a small nuclear power plant with a power of 50 MWe. In the first part of the work is proposed thermal and mass balance. The turbine has seven unregulated steam extractions, which are divided: two are for high-pressure feedwater heater, four are for low-pressure condensate heater and one is for degassing. The next chapter deals with the calculation of the regulation stage which is designed like an A-wheel and here is also strength control. Then, a pre-design and a detailed design of the stage part with the reaction blading. The stage part is consisted of eight cones with a total number of 27 stages. In the following chapters, is calculated the compensating piston, seals system and bearings. In the end, is made the consumption diagram. Part of the work is a conceptual drawing of a steam turbine section. The resulting steam turbine has a power output 50,197 MW and an internal thermodynamic efficiency of 73,9 %.
APA, Harvard, Vancouver, ISO, and other styles
6

Řezníček, Ondřej. "Kondenzační parní turbina." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230760.

Full text
Abstract:
The theme of this thesis is design of single body condensing steam turbine of 50 MW to saturated steam for new nuclear power plant generation. In the thesis is made design and calculation of balancing scheme. On the basis of the calculation is made blades part of turbine. Furthermore, the thesis solves basic strength and structural calculations. The result is drawing of longitudinal cut of the turbine.
APA, Harvard, Vancouver, ISO, and other styles
7

Drápela, Jakub. "Parní kondenzační turbína s jedním regulovaným odběrem." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-254308.

Full text
Abstract:
This diploma thesis describes a design of condensing steam turbine out of entered data of vapor parameters. There is selected a reaction blading type according to a conception of the company PBS Energo PLC. The turbine has one controlled extraction and three uncontrolled ones. The work also includes a proposal of thermal scheme, bearing and gearbox assignment. Furthermore there is also made a draft design of longitudinal section turbine
APA, Harvard, Vancouver, ISO, and other styles
8

Jeřábek, Lukáš. "Aerodynamický návrh posledního stupně parní turbíny." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378638.

Full text
Abstract:
Diploma thesis deals with calculations of a steam turbine with two uncontrolled extraction points according to the assignment, aerodynamics of the last two stages and operating range with respect to ventilation, range of performance and straining of the last blading under the large condensation pressure deviations. For the first three stages the calculation of prismatic action blades is executed. The fourth and the fifth stages are designed with inconstant reaction over the blades length and their calculation is executed with constant circulation method. For these stages, aerofoil design with respect to their aerodynamic qualities is carried out using Bézier curves. During the whole time verification process of aerofoils qualities, their energy losses and isoentropic Mach number distribution is executed in MISES program in cooperation with Doosan Škoda Power.
APA, Harvard, Vancouver, ISO, and other styles
9

Mašek, Martin. "Kondenzační parní turbina 25 MW." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230758.

Full text
Abstract:
Master’s thesis deals with design and calculation of one body condensing steam turbine of 25 MW with samples for paper-making industry. The thesis is focused on calculation of the turbine’s heat balance with two technological samples and regeneration which consists of two low pressure heaters and a deaerator with a power reservoir. The steam turbine is designed with a water cooling condenser with down output. The flow part is calculated with lengths of blades. There are basic strength and proportion calculations. In the end of the thesis the turbine’s heat balance is recalculated to 80% and 105% scheme according to an assignment. Another part of this thesis is a drawing of a longitudinal cut of the turbine including a connector with a gearbox.
APA, Harvard, Vancouver, ISO, and other styles
10

Pavlíček, Martin. "Kondenzační parní turbina do paroplynového cyklu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230036.

Full text
Abstract:
This thesis named Cosdensing steam turbine in combi-cycle deals with the calculation of thermal balancing scheme and the design of turbine. This double body steam turbine with combined HP-IP part and double-flow LP part does not have any additional samples of technological steam. LP part has two side outputs to the water-cooled condensers. There is a basic calculation of force effects on the LP part at operation. The thesis also includes a drawing of a longitudinal cut of LP part and its layout, including positron of the condensers.
APA, Harvard, Vancouver, ISO, and other styles
More sources
You might also be interested in the extended bibliographies on the topic 'Lopatkování' for particular source types:
Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography