Relevant bibliographies by topics / Liquid system

Academic literature on the topic 'Liquid system'

Author: Grafiati
Published: 18 May 2024

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Liquid system.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Liquid system"

1

Jena, Vinod, Sanjay Ghosh, Sapana Gupta, Piyush Thakur, Noorjahan Ansari, and Natalija Matić. "LIQUID-LIQUID EQUILIBRIA OF THE PHOSPHORIC ACID, ESTER AND WATER TERNARY SYSTEM." Rudarsko-geološko-naftni zbornik 35, no. 2 (2020): 85–90. http://dx.doi.org/10.17794/rgn.2020.2.8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Janovszky, Dóra, and Kinga Tomolya. "Designing Amorphous/Crystalline Composites by Liquid-Liquid Phase Separation." Materials Science Forum 790-791 (May 2014): 473–78. http://dx.doi.org/10.4028/www.scientific.net/msf.790-791.473.

Full text
Abstract:
The Cu-Zr-Ag system is characterized by a miscibility gap. The liquid separates into Ag-rich and Cu-Zr rich liquids. Yttrium was added to the Cu-Zr-Ag and Cu-Zr-Ag-Al systems and its influence on liquid immiscibility was studied. This alloying element has been chosen to check the effect of the heat of mixing between silver and the given element. In the case of Ag-Y system it is highly negative (-29 kJ/mol). The liquid becomes immiscible in the Cu-Zr-Ag-Y system. To the effect of Y addition the quaternary liquid decomposed into Ag-Y rich and Cu-Zr rich liquids. The Y addition increased the field of miscibility gap. An amorphous/crystalline composite with 6 mm thickness has been successfully produced by liquid-liquid separation based on preliminary calculation of its composition. The matrix was Cu38Zr48Al6Ag8 and the crystalline phases were Ag-Y rich separate spherical droplets.
APA, Harvard, Vancouver, ISO, and other styles
3

Saito, Shimpei, Yutaka Abe, Akiko Kaneko, Tetsuya Kanagawa, Yuzuru Iwasawa, Eiji Matsuo, Ken-ichi Ebihara, Hiroshi Sakaba, Kazuya Koyama, and Hideki Nariai. "ICONE23-1886 EXPERIMENTAL STUDY ON JET INSTABILITY AND BREAKUP BEHAVIOR IN LIQUID-LIQUID SYSTEM." Proceedings of the International Conference on Nuclear Engineering (ICONE) 2015.23 (2015): _ICONE23–1—_ICONE23–1. http://dx.doi.org/10.1299/jsmeicone.2015.23._icone23-1_421.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

El-Samadony, Y. A. F., and B. M. Gibbs. "Energy Efficient Liquid Desiccant Hybrid Air Conditioning System." International Journal of Modeling and Optimization 4, no. 3 (June 2014): 211–15. http://dx.doi.org/10.7763/ijmo.2014.v4.375.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Bin Zhang, Bin Zhang, Shiyu Liu Shiyu Liu, Xianzhu Tang Xianzhu Tang, and and Jian'gang Lu and Jian'gang Lu. "Adaptive modulation system for liquid crystal phase modulator." Chinese Optics Letters 14, no. 9 (2016): 090604–90607. http://dx.doi.org/10.3788/col201614.090604.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Park, Manseok, Sungdong Kim, and Sarah Eunkyung Kim. "TSV Liquid Cooling System for 3D Integrated Circuits." Journal of the Microelectronics and Packaging Society 20, no. 3 (September 30, 2013): 1–6. http://dx.doi.org/10.6117/kmeps.2013.20.3.001.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

K . Harweel, Cecelia, and Asseel M. Rasheed. "Drop Interface Coalescence in Liquid-Liquid System." Iraqi Journal of Chemical and Petroleum Engineering 8, no. 1 (March 30, 2007): 35–42. http://dx.doi.org/10.31699/ijcpe.2007.1.5.

Full text
Abstract:
This investigation is a study of the length of time where drops can exist at an oil-water interface before coalescence take place with a bulk of the same phase as the drops. Many factors affecting the time of coalescence were studied in is investigation which included: dispersed phase flow rate, continuous phase height, hole size in distributor, density difference between phases, and viscosity ratio of oil/water systems, employing three liquid/liquid systems; kerosene/water, gasoil/water, and hexane/water. Higher value of coalescence time was 8.26 s at 0.7ml/ s flow rate, 30cm height and 7mm diameter of hole for gas oil/water system, and lower value was 0.5s at 0.3ml/s flow rate, 10 cm height and 3mm diameter of hole for hexane/water system. It is observed that time of coalescence increased with increase in the dispersed phase flow rate, continuous phase height, hole size in distributor, and viscosity ratio of oil/water system. The results have been analyzed by dimensional and statistical analysis, and a correlation was developed relating coalescence time with the operating/actors and the physical properties of the three oil/water systems.
APA, Harvard, Vancouver, ISO, and other styles
8

Di Wang, Di Wang, Qionghua Wang Qionghua Wang, Chuan Shen Chuan Shen, Xin Zhou Xin Zhou, and Chao Liu Chao Liu. "Color holographic zoom system based on a liquid lens." Chinese Optics Letters 13, no. 7 (2015): 072301–72305. http://dx.doi.org/10.3788/col201513.072301.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Volden, T., J. Goldowsky, N. Schmid, and V. Revol. "Portable Systems for Metered Dispensing of Aggressive Liquids." SLAS TECHNOLOGY: Translating Life Sciences Innovation 23, no. 5 (May 29, 2018): 470–75. http://dx.doi.org/10.1177/2472630318775316.

Full text
Abstract:
Precise metering in liquid dispensing applications often requires application-specific solutions due to incompatibilities of the sensor and actuator components with the dispensed liquids. Some reoccurring challenges are aggressive liquids that would damage the sensors or tubing, the need for sterile liquids while the pumps or sensors cannot be sterilized, or media that can clog the sensor channels. Two different dispensing systems are here presented where the dispensing flow rate or volume is indirectly measured through a coupled pressure change or airflow, thus avoiding contact between the sensor and liquid. The controlled pressure-driven dispensing (cPDD) system builds an overpressure in the liquid reservoir by pumping air and controls the opening of the liquid output valve based on the internal pressure development. The FlowCap system uses a liquid pump on the outlet, controlled by the measured inflow of air to the reservoir. Both systems are designed for compactness and portability and offer independent operation, as well as control and communication, over a wireless interface.
APA, Harvard, Vancouver, ISO, and other styles
10

Kotrasova, Kamila, and Eva Kormaníková. "A Study on Sloshing Frequencies of Liquid-Tank System." Key Engineering Materials 635 (December 2014): 22–25. http://dx.doi.org/10.4028/www.scientific.net/kem.635.22.

Full text
Abstract:
Liquid storage tanks are used to store of liquids. During earthquake activity the liquid exerts impulsive and convective pressures (sloshing) on the walls and bottom of tank. In the present paper, experimental and analytical study is taken up to obtain sloshing frequency of liquid contained in rectangular calculating of circular frequencies fluid in rectangular container. Analytical results of first natural frequency are compared with experiment.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Liquid system"

1

Attergren, Max, and Martin Lindwall. "Air Liquid Interface System." Thesis, KTH, Skolan för industriell teknik och management (ITM), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-299329.

Full text
Abstract:
The ALI-System is used to determine the toxicity of airborne nanoparticles to the human lungs. The following report seeks to describe the process of preparing an ALI-system built in a laboratory, for use outdoor. The project also involves preparing the existing ALI-system for manufacturing. The report mainly discusses the ALI-systems components, how these are constructed, demands and function. The ALI-system is very complex and needs many assisting systems to work. Some of these systems and problems with current solutions are discussed within this report. The main focus of the report is electrical systems, CAD and drafts. But also discussed are some thermal analyses.  The project generated a complete set of drafts of the exposure unit, a concept for all the electrical components and an evaluation of the heating system. The project departed from its main thesis since the available time to work on the thesis was cut short since all of the parts were not available from start, but also since there was a shortage of available workshop workers after June. Despite this the project could be regarded as successful since the client was happy with the end result.
Ett ALI-System används för att undersöka om luftburna nanopartiklar kan vara skadliga för människliga lungor. Nedan följer en rapport där ett ALI-System byggt i labb anpassas och förbereds för tillverkning. Tanken är att det skall konstrueras ett mobilt ALI-System som möjliggör mätningar i fält. Rapporten behandlar i huvudsak vilka komponenter som ingår, utformning av dessa samt krav och funktion. Systemet som skall konstrueras är komplext och kräver många delsystem för att klara av mätningar i fält. Delar av dessa system och lösningar på problem behandlas i rapporten. Huvudområden som behandlas är elektriska system, CAD och ritningar samt termiska analyser för att möta de krav som ställs. Projektet genererade ett komplett ritningsunderlag av exponeringsenhet, konceptframtagning för elektriska system samt dimensionering och analys av uppvärmningskällor. Projektets initiala mål att konstruera ett mobilt system, frångicks då upphandlingar av komponenter försenades samt att uppdragsgivaren behövde ritningsunderlag omgående på grund av tillgängligheten av verkstadspersonal under projektets gång. Trots detta anses projektet lyckat då uppdragsgivaren tillhandhölls det som önskades och arbetet som gjordes kan ligga till grund för vidareutveckling av ett mobilt system.
APA, Harvard, Vancouver, ISO, and other styles
2

Floyd, Tamara M. (Tamara Michelle) 1974. "A novel microchemical system for rapid liquid-liquid chemistry." Thesis, Massachusetts Institute of Technology, 2001. http://hdl.handle.net/1721.1/8273.

Full text
Abstract:
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Chemical Engineering, February 2002.
Includes bibliographical references (leaves 110-119).
Microchemical systems are sub-milliliter systems for chemical processes. They are constructed using microfabrication techniques originally developed for the fabrication of microelectronic circuits. The reduction in size, as compared to conventional systems, offers several advantages in improvement of heat and mass transfer and control of flow fields. In addition, microchemical systems are smaller, therefore inherently safer and capable of shorter thermal response times. The focus of this work has been a microchemical system with a multi-inlet contactor for liquid-liquid processes. The systems are fabricated using, primarily, silicon and glass in which feature sizes range from approximately 10 to 500 [mu]m. The multi-inlet contactor consists of 10 alternating inlets for two components. Fluids continuously enter the contactor, are focused by a converging channel, mix and react in a 50 m channel. The contactor is the central element in the microchemical system that also includes a parallel plate heat exchanger, infrared transmission detection capabilities and thin film metal temperature sensors. Quantitative data are obtained using on-chip optical detection methods, integrated thin film sensors, and off-chip pressure sensors. For microchemical systems, the length scales are short. Consequently, Reynolds numbers are small and the flow is laminar. When two or more streams are contacted in a homogeneous system, the flow is stable. The short length scales of the resulting lamellar stream enable rapid diffusion mixing for applications, such as kinetics studies or reaction-rate-limited operation of fast reactions.
(cont.) The mixing characteristics in the multi-inlet contactor are investigated through experiments and simulations. Without optimization, sub-second mixing times are achieved. By using experiments and simulations to gain a better understanding of diffusion mixing in the system, 99% mixing is achieved in less than 25 ms. Characterization of the microchemical system also includes determining the overall heat transfer coefficient for the parallel plate heat exchanger and demonstrating on-chip infrared transmission detection from 4000-1000 cm-1. Thus, these devices combine all the features necessary for kinetic studies, specifically control of residence time, control and monitoring of temperature, and concentration measurement by infrared spectroscopy. As a demonstration of microchemical systems as tools for kinetics studies, the microchemical mixer was used with in situ Fourier Transform infrared spectroscopy to monitor the alkaline hydrolysis of methyl formate. This reaction follows second order kinetics and is fast with a half life of 70 ms for the conditions used in this study. The rate constant that was extracted was in good agreement with the literature value. Moreover, in contrast to a previous study, no sample post processing was needed and the half-life of the reaction was reduced by an order of magnitude. Microchemical systems can also be useful tools in achieving and understanding heterogeneous fluid contacting. When an aqueous phase and organic phase are contacted in a 1:1 volumetric ratio, flow segregation can occur ...
by Tamara M. Floyd.
Ph.D.
APA, Harvard, Vancouver, ISO, and other styles
3

Zeiner, Tim. "Diffusion across the interface of an liquid-liquid system." Universitätsbibliothek Leipzig, 2016. http://nbn-resolving.de/urn:nbn:de:bsz:15-qucosa-198780.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Zeiner, Tim. "Diffusion across the interface of an liquid-liquid system." Diffusion fundamentals 24 (2015) 57, S. 1-2, 2015. https://ul.qucosa.de/id/qucosa%3A14576.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Gelbart, W. "Bulk liquid-metal irradiation system." Helmholtz-Zentrum Dresden - Rossendorf, 2015. http://nbn-resolving.de/urn:nbn:de:bsz:d120-qucosa-165893.

Full text
Abstract:
Introduction Low melting point metals are often encapsulated in a hermetic container, irradiated and the container transferred to hot-cell for material removal and processing. An important process of this kind is the production of 82Sr from rubidium (melting point: 39.5 °C.) This new concept departures completely form the encapsulated targets approach and allows an almost continues production by the irradiation of the bulk metal. As well, eliminated is the target transfer. By placing the target material dissolution chamber right in the target station, only the dissolution product is pumped to the hotcell for further processing. Material and Methods Some of the disadvantages of the encapsulated target are: 1. Complicated transfer system that is ex-pensive to install, slow and prone to failures. 2. Complex and expensive encapsulation procedure. 3. Loss of production time during the lengthy target changing. 4. Capsule geometry is constrained by the encapsulating process and transfer demands compromising heat transfer and beam power. To avoid the difficulties of liquid metal handling, metal salts are often used instead (rubidium chloride is one example). This creates other problems and limits the beam currents and production yields. In the system described, the liquid metal is transferred (by gravity) from a bulk container to an irradiation chamber. The chamber, made out of nickel-plated silver, holds the correct quantity of rubidium for one irradiation run. Because of the geometry of the chamber and the efficient cooling, up to 40KW of beam power can be delivered to the target. The chamber is equipped with thermocouples and a liquid-metal level detector and is entirely of welded/brazed construction. The alloy foil that forms the beam window is electron-beam welded to the chamber front ring. At the end of irradiation the irradiated liquid metal is gravity fed into a reaction chamber situ-ated below the irradiation chamber, and a new load of fresh rubidium released into the irradia-tion chamber. The liquid-metal transfer and the irradiation components are shown on FIG. 1, and the sectional view on FIG. 2. Appropriate chemicals (n-butanol in the case of rubidium) are delivered to the reaction chamber and the irradiated metal dissolved. The liquid dissolution product is transferred back to the hotcell. Since all steps of the reaction involve liquids, only small diameter tubes connect the target station with the hotcell. The transfer is fast and simple. The bulk liquid-metal storage container can be constructed to hold enough material for 10 or more runs. When empty, it is replaced with a pre-loaded one. The container is connected to the target system with one coupling and the exchange takes a short time. A robotic bottle exchange can be implemented if desired. The station is equipped with its own vacuum system, beam diagnostic (consisting of a four-sector mask) and a collimation. The target chamber and each of the beam intercepting components are electrically insulated to allow beam current monitoring. Constructed entirely out of metal and ceramic the target core assembly does not suffer from radiation damage. The use of aluminum, silver and alumina reduce component activation. Results and Conclusion A large part of the station design is based on the well proven construction of high current solid target system and is using the same, or similar components. Test was performed to optimize the liquid-metal transfer and the chamber filling with the correct volume, while leaving some room for expansion. A process for niobium coating of sliver is investi-gated. Niobium is known to provide good corro-sion resistance against liquid metals. Thermal modelling of the target and flow analysis of the cooling geometry is under way.
APA, Harvard, Vancouver, ISO, and other styles
6

Braibant, Bertrand. "Synthèse et étude de systèmes fluorés pour l'extraction liquide-liquide de métaux stratégiques." Thesis, Montpellier, 2017. http://www.theses.fr/2017MONTT175/document.

Full text
Abstract:
Aujourd’hui, une large part des métaux utilisés par l’industrie provient généralement des mines. Certains, dits stratégiques, pourraient présenter un risque d’approvisionnement voire d’épuisement des ressources naturelles. Ces métaux sont généralement utilisés dans des processus dispersifs, et se retrouvent répartis de façon inégale, avec d’autres métaux, dans des matrices toujours plus complexes, ce qui rend leur récupération couteuse en termes de procédés et d’énergie. Que ce soit pour des raisons stratégiques, économiques ou sociétales, il apparait que le recyclage des métaux est amené à devenir une activité importante dans le futur. L’approche hydrométallurgique, et en particulier l’extraction-séparation liquide-liquide, est une technique adaptée et éprouvée à ce jour pour répondre au recyclage des métaux. Ce travail de thèse s’intéresse au développement et l’étude de systèmes moléculaires fluorés pour l’extraction et la séparation de métaux par une approche liquide-liquide. La modularité de la partie fluorée de ce type de système moléculaire permet l’étude des diverses interactions (complexations, supramoléculaires) importantes d’un point du vue fondamental dans l’extraction liquide-liquide de métaux. De plus, leurs propriétés physico-chimiques (miscibilité,…) permettent d’envisager le design de procédés innovants dans le domaine de la séparation liquide-liquide, comme la mise en œuvre de systèmes tri-phasiques. Pour cela, deux séries de malonamides fluorés avec des espaceurs de taille variable, entre la tête complexante et le groupement perfluoré, ont été synthétisés. La modulation par l’espaceur de l’effet inductif des chaines perfluorées sur les propriétés physico-chimiques des extractants et sur la complexation d’un métal a été étudiée. De même, l’influence de certains paramètres d’extraction comme la charge en extractant, en acide et l’influence du diluant ont été caractérisés. La comparaison avec les ligands homologues hydrogénés a été effectuée, et les limites des différents systèmes établies. Une série de phosphates de trialkyles a également été étudiée et appliquée à un système tri-phasique d’extraction liquide-liquide. Des résultats préliminaires valident de manière encourageante l’approche choisie
A large part of the metals used by the industry is still coming from mines. Some metals, called strategic metals, may encounter a supply risk or even a total depletion of natural resources. They are usually used in dispersive way which make their recovery complicated, costly and energy intensive since they are in unequal amount, with other metal, in ever more complex matrices. Whether for strategic, economic or societal reason, the metal recycling is about to become an important industry in a near future. Hydrometallurgical processes, and liquid-liquid extraction in particular, are a robust technic giving answer to some of the recycling challenge. Our aim was to develop and study some fluorinated system for the extraction and the separation of metal through liquid-liquid approach. The tenability of the fluorinated part of these system allow the study of multiple interaction (complexation or supramolecular ordering) important in a fundamental point of view in liquid-liquid extraction. Physical and chemical properties such as their miscibility allow the development of new processes in the solvent extraction field such as triphasic liquid extraction system. To this end, two series of fluorinated malonamides with various spacer length between the complexing head and the fluorinated moiety were synthetized. The modulation, through the spacer, of the inductive effect of the fluorinated chain on the physical and chemical properties of the extractant and the complexation of the metal was studied. The influence of various extraction parameters such as the concentration in extractant, the acid and the diluent were characterized. The comparison of these malonamides with their hydrogenated homologues was done and the limits of these systems established. A family of trialkylphosphate was developed and apply to a triphasic extraction system. Preliminary results confirm the approach
APA, Harvard, Vancouver, ISO, and other styles
7

Zhang, Liqin. "A new liquid-liquid partitioning system for bioseparations at low temperatures." Ohio : Ohio University, 1997. http://www.ohiolink.edu/etd/view.cgi?ohiou1184618209.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Shih, Victor Chi-Yuan Tai Yu-Chong. "Temperature-controlled microchip liquid chromatography system /." Diss., Pasadena, Calif. : Caltech, 2006. http://resolver.caltech.edu/CaltechETD:etd-04182006-162552.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Du, Lingguo. "Rôle des films liquides sur des problèmes de mouillage dynamiques pour des systèmes liquide-liquide." Thesis, Bordeaux 1, 2012. http://www.theses.fr/2012BOR14566/document.

Full text
Abstract:
La récupération assistée du pétrole implique la progression dans unmilieu poreux d'une phase aqueuse qui pousse une phase organique. Al'échelle du pore, les forces visqueuses et la gravité sontnégligeables, et la capillarité joue un rôle prépondérant : ledéplacement des fluides est gouverné par leur affinité avec lessurfaces et par les hétérogénéités de canaux. Les films liquidesexistent dans les pores d'une roche. Trois systèmes microfluidiquessont mis en place pour étudier le rôle des films microscopiques (demouillage) ou des films macroscopiques (de coins). Le premier consisteen un capillaire de section circulaire dans lequel on suit lemouvement d'un ménisque dans des conditions de mouillage variées. Enparticulier, en mouillage pseudo-partiel, un hystérésis d'angle decontact est observé, mais les films de mouillage présents dans cesystème conduisent à un accrochage de ligne de contact beaucoup plusfaible qu'en absence de film. Les deuxième et troisième systèmesmettent en évidence l’influence des films de coins dans un canalrectangulaire sur l'avancée du ménisque. Le couplage de l'écoulemententre la phase du coin et la phase du milieu entraîne le drainage del’huile piégée. Les propriétés de ce nouveau mécanisme sontcaractérisées par des expériences et s’accordent avec le modèleconstruit
Enhanced oil recovery involves the displacement of an organic fluid byan aqueous one in the pores of the rocks. At the pores scale. Thedisplacement of fluids is governed by wetting condition of the system.The viscous and gravity forces are negligible and the capillarityplays a dominant role heterogeneities of channel sizes. Threemicrofluidic systems are designed to study experimentally the role ofmicroscopic liquid films (wetting) or macroscopic ones (corners) inthe pores level. The first one consists of the displacement of ameniscus in a circular capillary with various wetting conditions. Inparticular, for pseudo-partial wetting systems, a contact anglehysteresis is observed but with a weak pinning as compared to partialwetting systems where there are non wetting films. The second andthird ones show the influences of liquid films in the corners of asquare channel. The coupling between the corner flows and the mainflow involves the drainage of the trapped oil cluster. The propertiesof this new mechanism are consistent with the theoretical model, andalso characterized by experiments
APA, Harvard, Vancouver, ISO, and other styles
10

Tan, Junyi, and 譚軍毅. "Investigation of novel liquid desiccant cooling system." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2009. http://hub.hku.hk/bib/B42664251.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Liquid system"

1

United States. National Aeronautics and Space Administration., ed. Kinetics of diffusional droplet growth in a liquid/liquid two-phase system. [Washington, DC: National Aeronautics and Space Administration, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

E, Fradkov V., and United States. National Aeronautics and Space Administration., eds. Kinetics of diffusional droplet growth in a liquid-liquid two-phase system: Final technical report. [Washington, DC: National Aeronautics and Space Administration, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Trindade, Sergio C. Oxygenated transport liquid fuels: The total system = Combustibles liquides oxigenes pour le transport : le systeme globale. London: World Energy Conference, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

D, Southwick R., and United States. National Aeronautics and Space Administration., eds. Large liquid rocket engine transient performance simulation system. West Palm Beach, FL: Pratt & Whitney, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

D, Southwick R., and United States. National Aeronautics and Space Administration., eds. Large liquid rocket engine transient performance simulation system. West Palm Beach, Fl: United Technologies, Pratt & Whitney ; [Washington, DC, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

United States. National Aeronautics and Space Administration., ed. Kinetics of diffusional droplet growth in a liquid/liquid two-phase system: Final report. [Washington, DC: National Aeronautics and Space Administration, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Center, Lewis Research, ed. Fatigue criterion to system design, life and reliabilty. Cleveland, Ohio: National Aeronautics and Space Administration, Lewis Research Center, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

George C. Marshall Space Flight Center., ed. Liquid Rocket Booster (LRB) for the Space Transportation System (STS) systems study. [New Orleans, La.]: Martin Marietta Manned Space Systems, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

United States. National Aeronautics and Space Administration., ed. Liquid Rocket Booster (LRB) for the Space Transportation System (STS) Systems Study. [New Orleans, La.]: Martin Marietta, Manned Space Systems, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

United States. National Aeronautics and Space Administration., ed. Liquid rocket booster (LRB) for the Space Transportation System (STS) Systems Study. [New Orleans, La.?]: Martin Marietta, Manned Space Systems, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Liquid system"

1

Shiyan, Chang, Zhao Lili, Zhang Ting, and Zhang Xiliang. "Liquid Biofuels." In Sustainable Automotive Energy System in China, 217–70. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-36847-9_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Farmer, Thomas. "Liquid–Liquid Transitions in Y2O3–Al2O3 System." In Structural Studies of Liquids and Glasses Using Aerodynamic Levitation, 65–78. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-06575-5_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Mishra, D. P. "Liquid-Propellant Injection System." In Fundamentals of Rocket Propulsion, 333–95. Boca Raton: CRC Press, 2017.: CRC Press, 2017. http://dx.doi.org/10.1201/9781315175997-10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Borgstedt, H. U., and Z. Peric. "Electrochemical Studies in the Na — Hg System." In Liquid Metal Systems, 363–68. Boston, MA: Springer US, 1995. http://dx.doi.org/10.1007/978-1-4615-1977-5_40.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Liu, Xiaohua, and Yi Jiang. "Application of Liquid Desiccant System." In Desiccant-Assisted Cooling, 249–81. London: Springer London, 2013. http://dx.doi.org/10.1007/978-1-4471-5565-2_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Sharma, Surbhi, and Khushbu Gumber. "Liquid Organic Hydrogen Carrier System." In Prospects of Hydrogen Fueled Power Generation, 145–61. New York: River Publishers, 2024. http://dx.doi.org/10.1201/9781032656212-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Zheng, Li, Fu Feng, Ma Linwei, Liu Pei, Zhou Zhai, Zhang Jianbing, and Jiang Xiaolong. "Petroleum-Derived Liquid Fuels." In Sustainable Automotive Energy System in China, 109–54. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-36847-9_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Pei, Liu, Ma Linwei, Liu Guangjian, Pan Lingyin, and Li Zheng. "Coal-Derived Liquid Fuels." In Sustainable Automotive Energy System in China, 187–216. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-36847-9_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Van De Pol, F. C. M., and J. Branebjerg. "Micro Liquid-Handling Devices - A Review." In Micro System Technologies 90, 799–805. Berlin, Heidelberg: Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-45678-7_115.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Antunes Ferreira, Mafalda, Silvia D’Ambrosi, Thomas Würdinger, Pieter Wesseling, and Danijela Koppers-Lalic. "Liquid Biopsy Diagnosis of CNS Metastases." In Central Nervous System Metastases, 73–86. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-23417-1_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Liquid system"

1

Kamanina, Natalia V., and Natalie A. Vasilenko. "Correlation between speed, resolution, and sensitivity of the organic photoconductor liquid crystal system." In Liquid Crystals, edited by Jolanta Rutkowska, Stanislaw J. Klosowicz, Jerzy Zielinski, and Jozef Zmija. SPIE, 1998. http://dx.doi.org/10.1117/12.299997.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Blunk, D., Klaus Praefcke, M. Jachmann, and M. Horn. "1,4-diketo-pyrrolo[3,4-c]pyrrole: a novel core system for liquid crystals." In Liquid Crystals, edited by Marzena Tykarska, Roman S. Dabrowski, and Jerzy Zielinski. SPIE, 1998. http://dx.doi.org/10.1117/12.301281.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Li, Lingshan, Jihwan Kim, Shuojia Shi, and Michael J. Escuti. "Color-selective geometric phase lens for apochromatic lens system." In Liquid Crystals XXIV, edited by Iam Choon Khoo. SPIE, 2020. http://dx.doi.org/10.1117/12.2569165.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Hicks, Sarah, Kyung Min Lee, Michael E. McConney, Nelson V. Tabiryan, and Timothy J. Bunning. "Rewriting bulk photoalignment of nematic liquid crystals in a two-step exposure system." In Liquid Crystals XXV, edited by Iam Choon Khoo. SPIE, 2021. http://dx.doi.org/10.1117/12.2594786.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kumemura, Momoko. "Liquid-Liquid Extraction in Microfluidic System Using Dispersed Liquid Droplet." In SLOW DYNAMICS IN COMPLEX SYSTEMS: 3rd International Symposium on Slow Dynamics in Complex Systems. AIP, 2004. http://dx.doi.org/10.1063/1.1764075.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kim, W. T., K. S. Song, and Y. Lee. "DEVELOPMENT AND EVALUATION OF A TWO-PHASE LOOP-TYPE THERMOSYPHON FOR COOLING TELECOMMUNICATIONS SYSTEM." In International Symposium on Liquid-Liquid Two Phase Flow and Transport Phenomena. Connecticut: Begellhouse, 1997. http://dx.doi.org/10.1615/ichmt.1997.intsymliqtwophaseflowtranspphen.230.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Pierson, R. M., J. E. Lucken, and H. W. Shaver. "Liquid Petroleum Confinement System." In SPE Production and Operations Symposium. Society of Petroleum Engineers, 2001. http://dx.doi.org/10.2118/67243-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Wang, Qiong-Hua, Di Wang, Lei Li, and Su-Juan Liu. "Holographic zoom system based on spatial light modulator and liquid device." In Emerging Liquid Crystal Technologies XIII, edited by Igor Muševič, Liang-Chy Chien, Dirk J. Broer, and Vladimir G. Chigrinov. SPIE, 2018. http://dx.doi.org/10.1117/12.2297074.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

He, Xiaoxian, Qinggui Tan, Hongru Guo, Liang Wu, Xiangru Wang, and Caidong Xiong. "Polarization-independent beam-steering system based on liquid-crystal spatial light modulators." In Emerging Liquid Crystal Technologies XIV, edited by Liang-Chy Chien. SPIE, 2019. http://dx.doi.org/10.1117/12.2508207.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Flynn, Howard, Brian Lusby, and Mark Villemarette. "Liquid Oxygen/Liquid Methane Integrated Propulsion System Test Bed." In 47th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2011. http://dx.doi.org/10.2514/6.2011-5842.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Liquid system"

1

Adams, R. T. Liquid Effluent Monitoring Information System (LEMIS) System Construction. Office of Scientific and Technical Information (OSTI), October 1994. http://dx.doi.org/10.2172/10192088.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Meloy, R. T. Contaminated liquid drain system operability test. Office of Scientific and Technical Information (OSTI), April 1995. http://dx.doi.org/10.2172/65028.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Baker, M. N., and H. M. Houston. Liquid waste treatment system. Final report. Office of Scientific and Technical Information (OSTI), June 1999. http://dx.doi.org/10.2172/754794.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Ward, Kyle, and Timothy Jacobs. PR-457-20204-R01 Pump Station Efficiency Improvement Evaluation. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), January 2021. http://dx.doi.org/10.55274/r0012006.

Full text
Abstract:
Pipeline transmission of liquids, although highly cost effective relative to other means of liquid transport (e.g., on-highway freight vehicles or trains), still encumbers costs with opportunities for improvement. Liquid pumps, serving as the prime mover for liquids in a pipeline, are a chief operating expense for pipeline transmission. A large and diverse set of pump characteristics - both in terms of style, motive force, and age -make it difficult to identify technologies that result in substantial cost savings for the owner / operator of liquid pipeline systems. Thus, characterizing and classifying the various liquid pump technologies, as well as identifying the latest advancements that can enable retrofit and / or new installation improvements for the purpose of reducing operational pump costs and downtime, is crucial. This study identifies the latest advancements that can increase pump efficiency, increase overall system efficiency, and allow for short-term and long-term cost savings.
APA, Harvard, Vancouver, ISO, and other styles
5

Greg Harper and Charles Powars. Advanced Liquid Natural Gas Onboard Storage System. Office of Scientific and Technical Information (OSTI), October 2003. http://dx.doi.org/10.2172/835120.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Westsik, J. H. Jr. Temperature control system for liquid-fed ceramic melters. Office of Scientific and Technical Information (OSTI), October 1986. http://dx.doi.org/10.2172/5058726.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Westsik, J. H. Jr, and B. B. Brenden. Melter viewing system for liquid-fed ceramic melters. Office of Scientific and Technical Information (OSTI), January 1988. http://dx.doi.org/10.2172/5460207.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Baker, M. N., and R. F. Gessner. Low-level liquid waste treatment system start-up. Office of Scientific and Technical Information (OSTI), July 1989. http://dx.doi.org/10.2172/10197011.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Goericke, Ralf. Acquisition of a Liquid Chromatography/Mass-Spectrometry System. Fort Belvoir, VA: Defense Technical Information Center, September 1998. http://dx.doi.org/10.21236/ada353903.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Nataf, J., and F. Winkelmann. Dynamic simulation of a liquid desiccant cooling system using the Energy Kernel System. Office of Scientific and Technical Information (OSTI), February 1991. http://dx.doi.org/10.2172/5968703.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Liquid system' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography