Relevant bibliographies by topics / Liquid coating

Academic literature on the topic 'Liquid coating'

Author: Grafiati
Published: 10 December 2022
Last updated: 28 January 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Liquid coating.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Liquid coating"

1

Wang, Kaifeng, Jing Cheng, Yunsheng Zhu, Xianrong Wang, and Xiaowei Li. "Experimental research on the performance of the thermal-reflective coatings with liquid silicone rubber for pavement applications." e-Polymers 21, no. 1 (January 1, 2021): 453–65. http://dx.doi.org/10.1515/epoly-2021-0046.

Full text
Abstract:
Abstract The thermal-reflective coating technology can effectively realize the active cooling of asphalt pavement, thus delaying the occurrence of pavement rutting. Although solid fillers are usually used to absorb light and weaken light dazzle in traditional thermal-reflective coatings, this method makes the filler component complicated and the coatings more viscous and increases the difficulty of painting the coating material on the pavement surface. On account of all the aforementioned factors, this experimental study aims to effectively improve the performance of the thermal-reflective coating with liquid silicone rubber addition in which epoxy resin is the base material and rutile titanium dioxide is the pigment filler for the coating film. Through lab experiments, the effects of the proper liquid silicone rubber dosage on the glossiness, cooling performance, and hardness of the thermal-reflective coating are studied and analyzed. The experimental results show that the liquid silicone is very effective for coating toughness improvement. The thermal-reflective coating, when the liquid silicone rubber dosage changes from 10 to 14 wt%, exhibits a matt state, and its glossiness can be controlled below 30 GU, which meets the safety and antiglare requirements of traffic vehicles. It demonstrates that liquid silicone rubber can influence the viscosity of the thermal-reflective coatings, and when the liquid silicone dosage reaches 16 wt%, the viscosity of the coating increases by 7.26 wt% less than that of the solid matting filler. Liquid silicone rubber can also influence the cooling effect of the thermal-reflective coatings, with the liquid silicone rubber dosage of 16 wt%, the asphalt pavement temperature can reduce 0.5°C. Besides, liquid silicone rubber reduces the hardness of the coatings, the coating hardness is 6H when the liquid silicone rubber dosage is 0–10 wt%, and the hardness of the coating reduces to 5H when liquid silicone dosage is from 12 to 16 wt%, which meets the actual requirements. Therefore, this article recommends a 12 wt% dosage of the liquid silicone rubber to be used as a matting filler for the thermal-reflective coatings.
APA, Harvard, Vancouver, ISO, and other styles
2

Zhang, Weixin, Johan Lub, Albertus P. H. J. Schenning, Guofu Zhou, and Laurens T. de Haan. "Polymer Stabilized Cholesteric Liquid Crystal Siloxane for Temperature-Responsive Photonic Coatings." International Journal of Molecular Sciences 21, no. 5 (March 6, 2020): 1803. http://dx.doi.org/10.3390/ijms21051803.

Full text
Abstract:
Temperature-responsive photonic coatings are appealing for a variety of applications, including smart windows. However, the fabrication of such reflective polymer coatings remains a challenge. In this work, we report the development of a temperature-responsive, infrared-reflective coating consisting of a polymer-stabilized cholesteric liquid crystal siloxane, applied by a simple bar coating method. First, a side-chain liquid crystal oligosiloxane containing acrylate, chiral and mesogenic moieties was successfully synthesized via multiple steps, including preparing precursors, hydrosilylation, deprotection, and esterification reactions. Products of all the steps were fully characterized revealing a chain extension during the deprotection step. Subsequently, the photonic coating was fabricated by bar-coating the cholesteric liquid crystal oligomer on glass, using a mediator liquid crystalline molecule. After the UV-curing and removal of the mediator, a transparent IR reflective polymer-stabilized cholesteric liquid crystal coating was obtained. Notably, this fully cured, partially crosslinked transparent polymer coating retained temperature responsiveness due to the presence of non-reactive liquid-crystal oligosiloxanes. Upon increasing the temperature from room temperature, the polymer-stabilized cholesteric liquid crystal coating showed a continuous blue-shift of the reflection band from 1400 nm to 800 nm, and the shift was fully reversible.
APA, Harvard, Vancouver, ISO, and other styles
3

Gigante, Vito, Luca Panariello, Maria-Beatrice Coltelli, Serena Danti, Kudirat Abidemi Obisesan, Ahdi Hadrich, Andreas Staebler, et al. "Liquid and Solid Functional Bio-Based Coatings." Polymers 13, no. 21 (October 22, 2021): 3640. http://dx.doi.org/10.3390/polym13213640.

Full text
Abstract:
The development of new bio-based coating materials to be applied on cellulosic and plastic based substrates, with improved performances compared to currently available products and at the same time with improved sustainable end of life options, is a challenge of our times. Enabling cellulose or bioplastics with proper functional coatings, based on biopolymer and functional materials deriving from agro-food waste streams, will improve their performance, allowing them to effectively replace fossil products in the personal care, tableware and food packaging sectors. To achieve these challenging objectives some molecules can be used in wet or solid coating formulations, e.g., cutin as a hydrophobic water- and grease-repellent coating, polysaccharides such as chitosan-chitin as an antimicrobial coating, and proteins as a gas barrier. This review collects the available knowledge on functional coatings with a focus on the raw materials used and methods of dispersion/application. It considers, in addition, the correlation with the desired final properties of the applied coatings, thus discussing their potential.
APA, Harvard, Vancouver, ISO, and other styles
4

Svetlov, Stanislav D., Dmitry A. Sladkovskiy, Kirill V. Semikin, Alexander V. Utemov, Rufat Sh Abiev, and Evgeny V. Rebrov. "Synthesis of Thin Titania Coatings onto the Inner Surface of Quartz Tubes and Their Photoactivity in Decomposition of Methylene Blue and Rhodamine B." Catalysts 11, no. 12 (December 16, 2021): 1538. http://dx.doi.org/10.3390/catal11121538.

Full text
Abstract:
An evaporation-deposition coating method for coating the inner surface of long (>1 m) quartz tubes of small diameter has been studied by the introduction of two-phase (gas-liquid) flow with the gas core flowing in the middle and a thin liquid film of synthesis sol flowing near the hot tube wall. The operational window for the deposition of continuous titania coatings has been obtained. The temperature range for the deposition of continuous titania coatings is limited to 105–120 °C and the gas flow rate is limited to the range of 0.4–1.0 L min−1. The liquid flow rate in the annular flow regime allows to control the coating thickness between 3 and 10 micron and the coating porosity between 10% and 20%. By increasing the liquid flow rate, the coating porosity can be substantially reduced. The coatings were characterized by X-ray diffraction, N2 chemisorption, thermogravimetric analysis, and scanning electron microscopy. The coatings were tested in the photocatalytic decomposition of methylene blue and rhodamine B under UV-light and their activity was similar to that of a commercial P25 titania catalyst.
APA, Harvard, Vancouver, ISO, and other styles
5

Hýsek, Štěpán, Hakan Fidan, Miloš Pánek, Martin Böhm, and Kamil Trgala. "WATER PERMEABILITY OF EXTERIOR WOOD COATINGS: WATERBORNE ACRYLATE DISPERSIONS FOR WINDOWS." Journal of Green Building 13, no. 3 (June 2018): 1–16. http://dx.doi.org/10.3992/1943-4618.13.3.1.

Full text
Abstract:
Permeability of coatings for water and water vapor is an important factor in their wood protective function. In this study, the permeability of coatings in terms of liquid water and water vapor absorption and desorption was measured based on different parts of the standard EN 927. This study evaluated the permeability of commercial coating systems and ascertained effects of coating layering on the coating permeability. For this measurement, six different waterborne acrylate dispersions were used as paint on spruce test samples. The results clearly revealed that liquid water and water vapor uptake were affected by coating film thickness, number of coats, and coating composition (producer). It was ascertained that the type of coating pigmentation affected water absorption of coatings and that with a constant coating film thickness, the number of coats affected water vapor absorption and desorption, but not water absorption. Furthermore, it was observed that the number of coats affected the correlation between the coating film thickness and water vapor absorption and desorption. The values for water vapor absorption were much higher than for liquid water absorption and, unlike the water vapor absorption rate, the water vapor desorption rate was approximately 50% lower.
APA, Harvard, Vancouver, ISO, and other styles
6

Brezinová, Janette, Anna Guzanová, Jana Tkáčová, Jakub Brezina, Kristína Ľachová, Dagmar Draganovská, Filip Pastorek, Pavlo Maruschak, and Olegas Prentkovskis. "High Velocity Oxygen Liquid-Fuel (HVOLF) Spraying of WC-Based Coatings for Transport Industrial Applications." Metals 10, no. 12 (December 14, 2020): 1675. http://dx.doi.org/10.3390/met10121675.

Full text
Abstract:
In this article, we analyse five types of coatings, in terms of their microstructure, hardness, porosity, and wear resistance, in the as-sprayed state. The coatings are WC-based (WC-FeCrAl, WC-WB-Co, and WC-NiMoCrFeCo), alloy-based (Co-MoCrSi), or nanoWC coating-based (nanoWC-CoCr). Two tests were applied to assess the wear resistance of the coatings: a dry-pot wear test with two impact angles and an abrasive test using an abrasive cloth with two grit sizes. Porosity was determined by image analysis. Vickers impression was performed on cross-sections of the coatings, in order to determine their indentation fracture toughness. The highest hardness of the tested coatings was recorded for the nanoWC coating, followed by the rest of the WC-based coatings; meanwhile, the lowest hardness was recorded for the alloy coating. Minimal porosity was achieved by the alloy coating, due to its different nature and the absence of hard particles with a higher melting point. The NanoWC coating and other WC-based coatings had a higher porosity; however, porosity did not exceed 1% for each coating. The best wear resistance was achieved by the nanoWC coating, followed by the other WC-based coatings, with the lowest obtained by the alloy coating. The same tendency was recorded when determining the indentation fracture toughness. From a microscopic point of view, the structure of the evaluated coatings is not compact; nevertheless, their properties are excellent, and they act as compact coatings under load.
APA, Harvard, Vancouver, ISO, and other styles
7

Handschuh-Wang, Stephan, Lifei Zhu, and Tao Wang. "Is There a Relationship between Surface Wettability of Structured Surfaces and Lyophobicity toward Liquid Metals?" Materials 13, no. 10 (May 15, 2020): 2283. http://dx.doi.org/10.3390/ma13102283.

Full text
Abstract:
The liquid metal lyophobicity of a rough substrate was, in previous articles, found to be rather independent on the surface wettability. In this article, we scrutinize the impact of surface wettability of a structured (rough) surface on the liquid metal wettability and adhesion. As a model system, a structured diamond coating was synthesized and modified by air plasma. We show that surface wettability (surface free energy) does not play a prominent role for static contact angle measurements and for the liquid metal repelling properties of the diamond coating in droplet impact experiments. In contrast, roll off angles and repeated deposition experiments illustrate that the increased hydrophilicity impacts the long-term liquid metal repellency of our coating. Liquid metal adhered after around 50 deposition/removal cycles on the hydrophilic diamond coating, while no liquid metal adhesion was visible after 100 cycles on the hydrophobic diamond coating, illustrating the fundamental role for the adhesion of liquid metal. The effect of repeated deposition in conjunction with gentle applied force was employed for coating the liquid metal lyophobic (hydrophilic) diamond coating with a thin liquid metal layer. The observed effect may find application in flexible electronics and thermal management systems as a means to improve interfacing of the liquid metal with conductive non-metal coatings.
APA, Harvard, Vancouver, ISO, and other styles
8

Loganina, Valentina I. "Super-Hydrophobic Coating Based on Acrylic Resin A01." Solid State Phenomena 316 (April 2021): 720–25. http://dx.doi.org/10.4028/www.scientific.net/ssp.316.720.

Full text
Abstract:
Information on the effect of organosilicon liquid on the hydrophobic properties of coatings, based on acrylic resin, is presented. It is shown that the value of the contact angle on the anti-icing coating is 151-154 degrees. When moistened for 72 hours, a decrease in the value of the contact angle, especially on the control coating, is 81-103 degrees. However, at the introduction of liquid 136-41, a decrease in the contact angle is insignificant. The surface energy of the coatings was calculated. It was found that the introduction of an organosilicon liquid in an acrylic composition increases the surface energy of the coatings.
APA, Harvard, Vancouver, ISO, and other styles
9

Prisusilo, Yoga, and Ihsan Saputra. "Pengujian dan Pengukuran Perubahan Coating Liquid Flow Rate dan Coating Time Duration Terhadap Hasil Coating Quality Angle Mesin Diener Tetra 100." Jurnal Teknologi dan Riset Terapan (JATRA) 3, no. 2 (December 29, 2021): 44–50. http://dx.doi.org/10.30871/jatra.v3i2.3174.

Full text
Abstract:
Salah satu hal yang menjadi tolak ukur kualitas dari suatu produk adalah produk sesuai dengan spesifikasi dan tidak terdapat cacat produk. Mesin diener tetra 100 berfungsi untuk memproduksi Housing top, Housing Bottom, Rocker switch, Batre door, push button, dan T. Coil. Biasanya produk mesin Diener Tetra 100 sering terjadi reject disebabkan karena kotor, setting parameter salah, serta tingkat pemanasan Coating yang tidak sesuai. Pada penelitian ini dikaji tentang pengaruh perubahan parameter mesin Diener Tetra 100 dan pengecekan pengukuran terhadap hasil coating. Penelitian ini bertujuan untuk mendapatkan nilai yang optimal dari pengaturan aliran cairan coating (coating liquid flow rate) dan durasi waktu penyemprotan coating (time duration). Penelitian memvariasikan settingan parameter coating liquid flow rate, coating time duration, dan temperature chamber. Dimana untuk variabel bebas Time duration 10 menit, 30 menit, 45 menit, serta variabel bebas coating liquitd flow rate, 70 mL/second, 100 mL/second, 130 mL/second, dengan temperature chamber yang sama 60oC. Berdasarkan hasil yang diperoleh pada penelitian ini, ditemukan 3 parameter yang optimal pada mesin Diener Tetra 100. Di antaranya adalah parameter coating time duration 45 menit dan coating liquid Flow rate 70 ml/second; Time Duration Liquid 30 menit dan Coating liquid flow rate 100 ml/second; Time Duration Liquid 10 menit dan Coating liquid flow rate 130 mL/second, karena presentase reject produk yang didapatkan dari hasil penelitian ini rendah.
APA, Harvard, Vancouver, ISO, and other styles
10

Yan, Xiaoxing, Lin Wang, and Xingyu Qian. "Effect of Coating Process on Performance of Reversible Thermochromic Waterborne Coatings for Chinese Fir." Coatings 10, no. 3 (March 1, 2020): 223. http://dx.doi.org/10.3390/coatings10030223.

Full text
Abstract:
The effect of the coating process on the properties of reversible thermochromic waterborne coating on the surface of Chinese fir was examined. The results demonstrated that the most critical process parameter affecting the color difference and gloss of the coating was the way of adding thermochromic ink. The coating process had little influence on the adhesion, impact resistance adding, liquid resistance, and original properties of the coating. There was no obvious gloss variation in the coating under different coating processes. For the (3+3) layered coatings, when the thermochromic ink was added to the topcoats, the discoloration performance was the most obvious and the comprehensive performance of coating was better. Meanwhile, the gloss was 55.6%, the adhesion grade was grade 0, the impact resistance was 5.0 kg·cm, the liquid resistance grade of the coating to sodium chloride, ethanol and detergent was grade 1, and the liquid resistance grade to red ink was grade 3. The discoloration performance of the coating was stable under the conditions of aging and time change. This study provides new insight into preparing thermochromic intelligent waterborne wood coatings with potential practical applications on Chinese fir wood surfaces, and also lays a foundation for its application in furniture engineering.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Liquid coating"

1

Harrison, Matthew Robert. "Liquid bridges in printing and coating." Thesis, University of Leeds, 2006. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.434213.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

May, Michael Humphrey. "Conformal coating of mammalian cells at a liquid-liquid interface." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp04/nq35243.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Hoggan, Erik Nebeker. "Spin Coating and Photolithography Using Liquid and Supercritical Carbon Dioxide." NCSU, 2002. http://www.lib.ncsu.edu/theses/available/etd-09232002-125551/.

Full text
Abstract:
This thesis details work on the utilization of dense phase carbon dioxide (CO2) in semiconductor processing. In particular, work is presented on the formulation of CO2 soluble photoresists and the spin coating of those photoresists using only liquid CO2 as a solvent. As part of this spin coating work, a novel high-pressure CO2 spin coater was designed and constructed, and the theoretical equations governing its performance were derived. Also discussed in this thesis are 248 and 193 nm exposures of these CO2 spun films and subsequent development in supercritical CO2. Resist stripping was also performed in CO2. In short, this thesis details the first steps towards a complete replacement of all aqueous and organic solvents in the conventional photolithographic processes of spin coating, developing, and resist stripping. This change not only confers significant environmental advantages, but opens up many new avenues in resist chemistry and promises improvements in large scale film uniformity, elimination of feature collapse, elimination of extraneous processing steps, and improved control of the lithographic process.
APA, Harvard, Vancouver, ISO, and other styles
4

Burris, Matthew L. "Material evaluation of liquid metal corrosion in Zn-Al hot-dip coating baths." Morgantown, W. Va. : [West Virginia University Libraries], 2000. http://etd.wvu.edu/templates/showETD.cfm?recnum=1400.

Full text
Abstract:
Thesis (M.S.)--West Virginia University, 2000.
Title from document title page. Document formatted into pages; contains xi, 106 p. : ill. (some col.). Vita. Includes abstract. Includes bibliographical references (p. 71-73).
APA, Harvard, Vancouver, ISO, and other styles
5

Xu, Jing. "Kinetics of corrosion and dross build-up in molten Zn-Al systems." Morgantown, W. Va. : [West Virginia University Libraries], 2007. https://eidr.wvu.edu/etd/documentdata.eTD?documentid=5294.

Full text
Abstract:
Thesis (Ph. D.)--West Virginia University, 2007.
Title from document title page. Document formatted into pages; contains x, 235 p. : ill. (some col.). Includes abstract. Includes bibliographical references.
APA, Harvard, Vancouver, ISO, and other styles
6

Takei, Klara, and Bergman Felicia Lindén. "Clogging Prevention in Submerged Entry Nozzles Focusing on CaTiO3 as a Coating Material." Thesis, KTH, Materialvetenskap, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-128608.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Iamvasant, Chanon. "Coating mechanical and acoustical design considerations for resistance to solid and liquid particle impact." Thesis, University of Sheffield, 2018. http://etheses.whiterose.ac.uk/19261/.

Full text
Abstract:
The erosion of components subjected to water droplet impact has been documented in various applications e.g. aircraft and wet-steam turbine blades. In wet-steam turbine systems, erosion of the of leading edge turbine blades causes significant loss of efficiency. Despite the efforts that have been put into this field over the past 50 years, no one has solved the problem of water droplet erosion. This may be attributed to the different damage phenomena; extremely high contact pressure; stress wave propagation; jetting and excessive heating etc. that occur in high- speed water droplet erosion. The main purpose of this thesis work was to attempt to link existing (but fragmented) knowledge of different aspects of water droplet erosion and the requirements to construct a protective coating to resist it. Discoveries from critical literature reviews were that the impact energy may be viewed as mechanical dissipation of stresses/strains or acoustic attenuation of stress waves. Therefore, architectural designs of protective WDE coating structures must try to satisfy both of these considerations. To provide some validation of both the mechanical (stresses/strains) and acoustical (stress waves) considerations, titanium-based monolithic and multilayer PVD coatings will be investigated and characterization techniques (i.e. nano-indentation, x-ray diffractometer (XRD, Optical Microscopy (OM) Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), Stylus profilometry) will be performed. Selected (both monolithic and multilayer) coatings will be subjected to both particulate (ball-on-plate) impact testing and water droplet erosion (WDE) testing. This thesis illustrates the versatility of the triode ion-plating PVD technique and its feasibility to produce thick (Ti, Ti(N) and TiN) monolithic coatings and (TiN/Ti, TiN/Ti(N)) multilayer coatings with reliable controllability in terms of chemical composition and designate d i 2 layer thickness. According to the results of this work, there is a definite distinction between the coating requirements for solid particle impact tests and liquid particle water droplet erosion, due to the differences in the way that the impact energy is delivered (i.e. strain rate, duration of the impact impulse, etc.) However, the results are inconclusive as to whether multilayer or monolithic coatings perform better in water droplet erosion. Finally, the information gathered experimentally was analyzed (with existing proposed models and theories) and interpreted to propose a coating architecture which will be superior in water droplet erosion performance.
APA, Harvard, Vancouver, ISO, and other styles
8

Elgadafi, Mansour M. "Angled curtain coating: An experimental study. An experimental investigation into the effect of die angle on air entrainment velocity in curtain coating under a range of operating conditions." Thesis, University of Bradford, 2010. http://hdl.handle.net/10454/4464.

Full text
Abstract:
In all coating applications, a liquid film displaces air in contact with a dry solid substrate. At a low substrate speed a thin uniform wetting line is formed on the substrates surface, but at a high speed the wetting line becomes segmented and unsteady as air becomes entrained between the substrate and the liquid. These air bubbles affect the quality of the coated product and any means to postpone this at higher speeds without changing the specifications of the coating liquid is desirable. This research assesses the validity of a theoretically based concept developed by Blake and Rushack [1] and exploited by Cohu and Benkreira [2] for dip coating. The concept suggests that angling the wetting line by an angle ß would increase the speed at which air is entrained by a factor 1/cos ß. In practice, if achieved this is a significant increase that would result in more economical operation. This concept was tested in a fast coating operation that of curtain coating which is already enhanced by what is known as hydrodynamic assistance [2]. Here we are effectively checking an additional assistance to wetting. The work, performed on a purposed built curtain coater and a rotating die, with a range of fluids showed the concept to hold but provided the data are processed in a way that separate the effect of curtain impingement from the slanting of the wetting line.
APA, Harvard, Vancouver, ISO, and other styles
9

Elgadafi, Mansour Masoud. "Angled curtain coating : an experimental study : an experimental investigation into the effect of die angle on air entrainment velocity in curtain coating under a range of operating conditions." Thesis, University of Bradford, 2010. http://hdl.handle.net/10454/4464.

Full text
Abstract:
In all coating applications, a liquid film displaces air in contact with a dry solid substrate. At a low substrate speed a thin uniform wetting line is formed on the substrates surface, but at a high speed the wetting line becomes segmented and unsteady as air becomes entrained between the substrate and the liquid. These air bubbles affect the quality of the coated product and any means to postpone this at higher speeds without changing the specifications of the coating liquid is desirable. This research assesses the validity of a theoretically based concept developed by Blake and Rushack [1] and exploited by Cohu and Benkreira [2] for dip coating. The concept suggests that angling the wetting line by an angle ß would increase the speed at which air is entrained by a factor 1/cos ß. In practice, if achieved this is a significant increase that would result in more economical operation. This concept was tested in a fast coating operation that of curtain coating which is already enhanced by what is known as hydrodynamic assistance [2]. Here we are effectively checking an additional assistance to wetting. The work, performed on a purposed built curtain coater and a rotating die, with a range of fluids showed the concept to hold but provided the data are processed in a way that separate the effect of curtain impingement from the slanting of the wetting line.
APA, Harvard, Vancouver, ISO, and other styles
10

Tang, Man. "Investigation of liquid sodium alginates as mucoadhesive bandages coating the oesophageal mucosa and protecting it from gastric reflux." Thesis, Aston University, 2004. http://publications.aston.ac.uk/11018/.

Full text
Abstract:
Gastro-oesophageal Reflux Disease (GORD), is generally caused by excess gastric reflux back to the oesophagus where damage to the mucosa results in injury. GORD is a very common disease in western countries, more than a quarter of western people are suffering from this disease and there is a trend that the percentage population in eastern countries who are diagnosed as GORD is increasing. GORD and its complications damage the quality of life and can lead to serious oesophageal diseases including Barrett’s disease and oesophageal carcinoma. Sodium alginate dissolved in water forms a viscous liquid and can coat on oesophageal mucosa for a period of time. In this study the ability of the liquid alginate to adhere to the oesophageal mucosa was investigated and the factors that affect this retention were examined. The potential of this liquid alginate as a drug delivery vehicle to extend the duration of contact with the oesophageal mucosa was confirmed by this study. The capacity of an alginate coating to retard acid and pepsin diffusion, the two main aggressive factors in gastric reflux, was investigated. A significant reduction in acid and pepsin diffusion by alginate gel layer was demonstrated in this project, indicating that alginate has great potential to protect against damage caused by acidic reflux. A novel method was introduced using an independent score system to assess the protection of oesophageal tissue by a coating of liquid alginate using microscopy as a technique. This technique demonstrated that alginate can protect the oesophageal epithelial tissue from the damage caused by gastric acid and pepsin. Many techniques were used in this study. The experimental results suggested that liquid sodium alginate is a very promising candidate in treating local oesophageal diseases through forming a coating on the oesophageal mucosal surface, retarding the diffusion of components of gastric refluxate and thus reducing the contact of these noxious factors with the epithelium and minimising injury.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Liquid coating"

1

Kistler, Stephan F., and Peter M. Schweizer, eds. Liquid Film Coating. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-011-5342-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bhagat, R. K. Interaction of lead-bismuth liquid alloy with graphite. Mumbai: Bhabha Atomic Research Centre, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Holmes, Bruce J. Advances in flow visualization using liquid-crystal coatings. Warrendale, Pa: Society of Automotive Engineers, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

May, Michael Humphrey. Conformal coating of mammalian cells at a liquid-liquid interface. 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

F, Kistler Stephan, and Schweizer Peter M, eds. Liquid film coating: Scientific principles and their technological implications. London: Chapman & Hall, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Schweizer, P. M., and S. F. Kistler. Liquid Film Coating: Scientific principles and their technological implications. Springer, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Schweizer, P. M., and S. F. Kistler. Liquid Film Coating: Scientific Principles and Their Technological Implications. Springer London, Limited, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Von Karman Institute for Fluid Dynamics., ed. Thin liquid film and coating processes: May 26-29, 1997. Rhode Saint Genèse, Belgium: Von Karman Institute for Fluid Dynamics, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

United States. National Aeronautics and Space Administration., ed. Final report to NASA Marshall Space Flight Center on the study of low temperature unbalanced magnetron deposition of hard, wear-resistant coatings for liquid-film bearing applications: Contract number NAG8-1020. [Washington, DC: National Aeronautics and Space Administration, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

United States. National Aeronautics and Space Administration., ed. Colorimetric qualification of shear sensitive liquid crystal coatings. San Jose, CA: MCAT Institute, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Liquid coating"

1

Durst, Franz, and Hans-Günter Wagner. "Slot Coating." In Liquid Film Coating, 401–26. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-011-5342-3_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Hens, Jules, and Willy Van Abbenyen. "Slide Coating." In Liquid Film Coating, 427–62. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-011-5342-3_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Miyamoto, Kimiaki, and Yoshinobu Katagiri. "Curtain Coating." In Liquid Film Coating, 463–94. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-011-5342-3_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Larson, Ronald G., and Timothy J. Rehg. "Spin Coating." In Liquid Film Coating, 709–34. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-011-5342-3_20.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Gaskell, Philip H., and Michael D. Savage. "Meniscus Roll Coating." In Liquid Film Coating, 573–97. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-011-5342-3_16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Pranckh, Ferdinand R., and Dennis J. Coyle. "Elastohydrodynamic Coating Systems." In Liquid Film Coating, 599–635. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-011-5342-3_17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kistler, Stephan F., and Peter M. Schweizer. "Coating Science and Technology: An Overview." In Liquid Film Coating, 3–15. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-011-5342-3_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Secor, Robert B. "Analysis and Design of Internal Coating Die Cavities." In Liquid Film Coating, 369–98. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-011-5342-3_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Schunk, P. Randall, and L. E. Scriven. "Surfactant Effects in Coating Processes." In Liquid Film Coating, 495–536. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-011-5342-3_14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Coyle, Dennis J. "Knife and Roll Coating." In Liquid Film Coating, 539–71. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-011-5342-3_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Liquid coating"

1

Feng, Wei, Danqing Liu, and Dirk J. Broer. "Electric field switched surface topography of fingerprint liquid-crystal network polymer coating." In Emerging Liquid Crystal Technologies XIII, edited by Igor Muševič, Liang-Chy Chien, Dirk J. Broer, and Vladimir G. Chigrinov. SPIE, 2018. http://dx.doi.org/10.1117/12.2287180.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kalliadasis, S. "DYNAMICS OF LIQUID SPREADING ON SOLID SURFACES." In Proceedings of the First European Coating Symposium. WORLD SCIENTIFIC, 1996. http://dx.doi.org/10.1142/9789814503914_0022.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Münch, Andreas. "TOWARDS A NUMERICAL SIMULATION OF THIN LIQUID DROPS." In Proceedings of the First European Coating Symposium. WORLD SCIENTIFIC, 1996. http://dx.doi.org/10.1142/9789814503914_0005.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Giuliani, Angela, Damiano Giunta, and Alessandro Condini. "Advancing in Liquid Coatings: High Performance Liquid Epoxy Coating for Oil Well Tubing, High Temperature and High Pressure Resistant." In Abu Dhabi International Petroleum Exhibition & Conference. Society of Petroleum Engineers, 2020. http://dx.doi.org/10.2118/202684-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Chen, Po-Ju, Philip Engel, and H. Paul Urbach. "Investigation on backplane reflectivity and dielectric mirror coating designs for improved LCoS SLM performance in telecommunication beam steering." In Emerging Liquid Crystal Technologies XVI, edited by Igor Muševič, Liang-Chy Chien, and Nelson V. Tabiryan. SPIE, 2021. http://dx.doi.org/10.1117/12.2583212.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Yang, G. J., C. J. Li, X. C. Huang, Y. Y. Wang, and C. X. Li. "Influence of Silver Doping on Photocatalytic Activity of Liquid Flame Sprayed Nanostructured TiO2 Coating." In ITSC2007, edited by B. R. Marple, M. M. Hyland, Y. C. Lau, C. J. Li, R. S. Lima, and G. Montavon. ASM International, 2007. http://dx.doi.org/10.31399/asm.cp.itsc2007p0655.

Full text
Abstract:
Abstract Silver ion was added to liquid feedstock to deposit Ag+ doping nanostructured TiO2 photocatalytic coatings through liquid flame spraying. The coating microstructure was characterized by X-ray diffraction (XRD). The photocatalytic performance of coatings was examined by photodegradation of acetaldehyde. XRD analysis showed that the phase structure of coatings was not significantly influenced by the silver ion doping. However, a shift was found for XRD peaks of anatase TiO2. The photocatalytic activity of the TiO2 coatings was increased and then decreased with the increase of dopant concentration. The photocatalytic activity of doping coatings was higher than that of pure TiO2 coating, in spite of dopant concentration. The enhancement of photocatalytic performance of doping coatings is attributed to co-doping of Ag+ ion and metallic Ag.
APA, Harvard, Vancouver, ISO, and other styles
7

Fujisawa, N., S. Funatani, and S. Kosaka. "Measurement of shear-stress distribution by liquid-crystal coating." In Optical Technology and Image Processing fo rFluids and solids Diagnostics 2002, edited by Gong Xin Shen, Soyoung S. Cha, Fu-Pen Chiang, and Carolyn R. Mercer. SPIE, 2003. http://dx.doi.org/10.1117/12.509840.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Horng, A. T. L. "CHEBYSHEV COLLOCATION METHOD ON SOLVING STABILITY OF A LIQUID LAYER FLOWING DOWN AN INCLINED PLANE." In Proceedings of the First European Coating Symposium. WORLD SCIENTIFIC, 1996. http://dx.doi.org/10.1142/9789814503914_0009.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Tsaprailis, Haralampos, Mona Abdolrazaghi, and Jeff Liang. "Methodology for Comparing Field Applied Liquid Epoxy and Hot Bituminous Tape Coating Repairs Using Inline Inspection Data." In 2016 11th International Pipeline Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/ipc2016-64189.

Full text
Abstract:
In this paper, pipelines with similar parameters (e.g., diameter, environment, temperature of the product, etc.) are used to compare the effectiveness of field repair coatings (i.e., liquid epoxy and tape coating systems) against external corrosion. Liquid epoxy and tape coating systems are compared based on number of corrosion features, severity, morphology and distribution of features over depth and length. Once corrosion defects are assessed in the field and a repair coating is applied, In-Line Inspection (ILI) tools can detect and size the corrosion features under these coatings. If the corrosion feature is growing, the growth can be detected and measured using ILI data assessment. In this paper, data from both field nondestructive examination (NDE) and ILI measurements collected from 1996 to 2013 are used to assess the corrosion growth rate (CGR) under both types of repair coatings. The CGR with respect to depth is compared for both liquid epoxy and tape coatings and then normalized by the number of corrosion features over the segment. In addition, the effectiveness of cathodic protection was evaluated at the locations of the assessed repair coating. Ultimately, this paper provides useful information to pipeline operators for decision making regarding the choice of repair coatings based on operational data collected over 14 years.
APA, Harvard, Vancouver, ISO, and other styles
10

Ma, X. H., Q. C. Wang, Z. Lan, J. B. Chen, T. Bai, Liejin Guo, D. D. Joseph, Y. Matsumoto, Y. Sommerfeld, and Yueshe Wang. "Transport Phenomena for Falling Liquid Film Process: Coating Configurations Effect." In THE 6TH INTERNATIONAL SYMPOSIUM ON MULTIPHASE FLOW, HEAT MASS TRANSFER AND ENERGY CONVERSION. AIP, 2010. http://dx.doi.org/10.1063/1.3366421.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Liquid coating"

1

Choudhuri, Ahsan, and Norman Love. Design Optimization of Liquid Fueled High Velocity Oxy- Fuel Thermal Spraying Technique for Durable Coating for Fossil Power Systems. Office of Scientific and Technical Information (OSTI), November 2016. http://dx.doi.org/10.2172/1356809.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Sridharan, Kumar, Mark Anderson, Todd Allen, and Michael Corradini. Liquid Salts as Media for Process Heat Transfer from VHTR's: Forced Convective Channel Flow Thermal Hydraulics, Materials, and Coating. Office of Scientific and Technical Information (OSTI), January 2012. http://dx.doi.org/10.2172/1033952.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kriven, Waltraud M. Deposition of Ceramic Coatings by the Changed Liquid Beam Cluster Technique. Fort Belvoir, VA: Defense Technical Information Center, January 2001. http://dx.doi.org/10.21236/ada386950.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Ronald W. Smith. High Density Infrared (HDI) Transient Liquid Coatings for Improved Wear and Corrosion Resistance. Office of Scientific and Technical Information (OSTI), July 2007. http://dx.doi.org/10.2172/909431.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Park, J. H., and T. F. Kassner. CaO insulator coatings on a vanadium-base alloy in liquid 2 at.% calcium-lithium. Office of Scientific and Technical Information (OSTI), October 1996. http://dx.doi.org/10.2172/415831.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Park, J. H., and T. F. Kassner. CaO insulator coatings and self-healing of defects on V-Cr-Ti alloys in liquid lithium. Office of Scientific and Technical Information (OSTI), February 1996. http://dx.doi.org/10.2172/224947.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Park, J. H., and T. F. Kassner. CaO insulator and Be intermetallic coatings on V-base alloys for liquid-lithium fusion blanket applications. Office of Scientific and Technical Information (OSTI), April 1996. http://dx.doi.org/10.2172/270426.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Qu, Jun, Yan Zhou, Donovan N. Leonard, Harry M. Meyer, III, and Huimin Luo. Annual Report - Compatibility of ZDDP and ionic liquid anti-wear additives with hard coatings for engine lubrications. Office of Scientific and Technical Information (OSTI), March 2016. http://dx.doi.org/10.2172/1241474.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Park, J. H., and G. Dragel. Fabrication and performance testing of CaO insulator coatings on V-5%Cr-5%Ti in liquid lithium. Office of Scientific and Technical Information (OSTI), April 1995. http://dx.doi.org/10.2172/115711.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Liquid coating' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography