Academic literature on the topic 'Library use studies Victoria Melbourne'

Purpose The purpose for this paper is to share jurisdictional knowledge on local law-making theory and praxis, an area of law not well represented in the literature despite its involvement in day-to-day life. Design/methodology/approach The paper not only shares knowledge about the local law-making process in Melbourne, Australia, but also explores attitudes to local law-making gathered through semi-structured interviews from a sample of relevant stakeholders. Findings The paper reports on findings from a study undertaken in Melbourne, Australia. Stakeholder perceptions and attitudes were canvassed regarding local law-making in the areas of land use planning and waste management. Overall, stakeholders were satisfied that Melbourne is a robust jurisdiction offering a fair and transparent local law-making system, but they see scope for more public participation. Research limitations/implications The findings suggest that even though the state of Victoria offers a fair and transparent system of local law-making, there is still significant scope for more meaningful involvement from the community, as well as space for more effective enforcement of local laws. The stage is set for greater cross-jurisdictional reciprocal learning about local law-making between cities. Originality/value This paper offers meaningful and utilitarian insight for policy and law makers, academics and built environment professionals from relevant stakeholders on the operation and transparency of local law-making.

London is a major international centre for study of and research into Chinese art. Four libraries - the British Library, the library of the School of Oriental and African Studies, the library of the Percival David Foundation of Chinese Art, and the National Art Library at the Victoria and Albert Museum - are perhaps the main providers of information on Chinese art, although information is also available from several museum libraries, from the library of Christie’s auction house, and from public and other libraries. A survey of users of information on Chinese art indicates that provision is generally satisfactory, although the degree of user satisfaction varies from one library to another. More effective networking between the key libraries would bring about significant improvements.

This paper reports findings from a comparative study which investigated public attitudes to recycled water in two Australian locations both in the state of Victoria: the capital city, Melbourne, and Bendigo, an urban regional centre. Two commercial buildings were used as case studies, one at each location. These buildings will soon be using recycled water for non-potable uses. The study was facilitated by an on-line survey of future occupants of both buildings to gauge their attitudes to recycled water use. Specifically the paper reports on happiness/willingness to use recycled water for various uses and attitudinal factors which were found to influence this. The circumstances for potable water availability and recycled water use differ in Melbourne and Bendigo, making this study a significant contribution to understanding public acceptance of recycled water use in these different contexts. No significant difference in happiness to use recycled water was found between locations. However, prior experience (use) of recycled water was found to be a significant and positive factor in facilitating happiness/willingness to use recycled water, particularly for closer to personal contact uses such as showering and drinking. Various attitudinal and demographic variables were found to influence happiness to use recycled water. Results indicate it is not just the locational context of water availability that influences happiness to use recycled water, but a person's experience and particular perceptions that will facilitate greater willingness to use recycled water.

Two major collecting institutions in Australia, the Australian Museum (Sydney) and Museums Victoria (Melbourne), are currently undertaking large-scale anoxic rehousing projects in their collections to control conservation issues caused by pyrite oxidation. This paper will highlight the successes and challenges of the rehousing projects at both institutions, which have collaborated on developing strategies to mitigate loss to their collections. In 2017, Museums Victoria Conservation undertook a survey with an Oxybaby M+ Gas Analyser to assess the oxygen levels in all their existing anoxic microclimates before launching a program to replace failed microclimates and expand the number of specimens housed in anoxic storage. This project included a literature review of current conservation materials and techniques associated with anoxic storage, and informed the selection of the RP System oxygen scavenger and Escal Neo barrier film from Mitsubishi Gas Chemical Company as the best-practice products to use for this application. Conservation at the Australian Museum in Sydney was notified of wide-scale pyrite decay in the Palaeontology and Mineral collections. It was noted that many of the old high-barrier film enclosures, done more than ten years ago, were showing signs of failing. None of the Palaeontology specimens had ever been placed in microclimates. After consultation with Museums Victoria and Collection staff, a similar pathway used by Museums Victoria was adopted. Because of the scale of the rehousing project, standardized custom boxes were made, making the construction of hundreds of boxes easier. It is hoped that new products, like the tube-style Escal film, will extend the life of this rehousing project. Enclosures are being tested at the Australian Museum with a digital oxygen meter. Pyrite rehousing projects highlight the loss of Collection materials and data brought about by the inherent properties of some specimens. The steps undertaken to mitigate or reduce the levels of corrosion are linked to the preservation of both the specimens and the data kept with them (paper labels). These projects benefited from the collaboration of Natural Sciences conservators in Australia with Geosciences collections staff. Natural Science is a relatively recent specialization for the Australian conservation profession and it is important to build resources and capacity for conservators to care for these collections. This applied knowledge has already been passed on to other regions in Australia.

Developed by the cosmetics industry, silicone-based solvents such as Cyclomethicone D4 and D5 and emulsifiers Velevsil Plus and KSG 350Z have found useful applications in museum conservation after being pioneered by Richard Wolbers to safety clean acrylic paint films. These products’ unique properties are also applicable for cleaning of natural science specimens. Silicone solvents are volatile and will completely evaporate away from surfaces. They have very low polarity and cannot not solubilise fats or oils, such as natural preen oils found in feathers. Low viscosity gives them the ability to flood a porous surface, such as bone, protecting it from absorbing chemicals and soiling during cleaning. Velevsil Plus and KSG 350Z provide the desirable ability to form an emulsion with water, and or solvents in a silicone based solvent carrier, allowing for the strictly controlled application of water or solvent solutions to the surface of a specimen. This poster will present case studies from the Otago Museum (Dunedin, New Zealand) and Museums Victoria (Melbourne, Australia) investigating the use of these products in cleaning natural science specimens. The experiments include the removal of an aged wax and shellac coating from a Moa (Dinonris sp.) skeleton, the removal of acrylic coatings on extremely moisture sensitive pyritized fossils, and the cleaning of soiled feathers and fur. Issues around sourcing and shipping these specialised products to Australasia will also be discussed. The successful application of paintings conservation techniques to scientific specimens demonstrates the benefits of collaboration between specialisations in conservation for developing new techniques for caring for our collections.

The Diatom Index for Australian Rivers (DIAR), originally developed at the genus level, was reformulated at the species level with data from diatom sampling of rivers in the Australian Capital Territory, New South Wales, Queensland, South Australia and Victoria. The resulting Diatom Species Index for Australian Rivers (DSIAR) was significantly correlated with the ARCE (Assessment of River Condition, Environment) index developed in the Australian National Land and Water Resources Audit (NLWRA), and with nine of the ARCE’s constituent indices and sub-indices, across 395 river reaches in south-eastern Australia. These correlations were generally stronger than those shown by the biological index that was used to assess river condition in the NLWRA, the ARCB (Assessment of River Condition, Biota) index based on macroinvertebrates and the Australian River Assessment System (AUSRIVAS). At a finer spatial scale, DSIAR was strongly and significantly correlated with measures of catchment urbanisation for streams in the eastern suburbs of Melbourne, Victoria. DSIAR scores across south-eastern Australia bore little relationship to the latitude, longitude or altitude of sampling sites, suggesting that DSIAR is not greatly affected by macro-geographical position. In addition, DSIAR scores did not vary greatly among small-scale hydraulic environments within a site. DSIAR appears to have potential as a broad-scale indicator of human influences on Australian rivers, especially the effects of agricultural and urban land use, and also for impact studies at a local scale. Further evaluation is warranted to test the sensitivity of the index to natural variables such as catchment geology, and to assess its performance in northern, western and inland Australia.

An actual dinner party is nearly always characterized by the presence of three central elements: a meal, a table, and a gathering of people, who usually converse. In this article Campion Decent considers the dinner party as a social event and questions how artists draw on its elements to inform artistic representations of dinner. He examines the use of dining events in drama, notably in five texts authored by women between the late 1970s and the present day–Tina Howe's The Art of Dining (1979) and One Shoe Off (1992), Caryl Churchill's Top Girls (1982), Moira Buffini's Dinner (2002), and Tanya Ronder's Table (2013). These texts share an emphasis on the symbolic idea of food or dining, feature tables with a woman at their centre and offer dialogue allied to the experiences of women. While the dining events that they depict are populated with vastly different characters and distinct conversations, the tables nevertheless function as potent yet ambiguous symbols both of women's oppression and of the potential for creative freedom. This article draws on research in anthropology, sociology, food studies, theatre and performance studies, and women's studies to illustrate the fertile complexity of ideas involved in the symbolic dinner. Campion Decent has recently completed his doctoral studies at La Trobe University, Melbourne. He is an award-winning playwright, with productions at Sydney Theatre Company, the Griffin Theatre, and the National Institute of Dramatic Art, Sydney. He has presented papers at Stanford University, Shanghai Theatre Academy, and Victoria University of Wellington.

This article seeks to review the Australian healthcare system and compare it to similar systems in other countries to highlight the main issues and problems. A literature search for articles relating to the Australian and other developed countries’ healthcare systems was conducted by using Google and the library of Victoria University, Melbourne. Data from the websites of the Commonwealth of Australia, the Australian Institute of Health and Welfare, the Australian Productivity Commission, the Organisation for Economic Co-operation and Development and the World Bank have also been used. Although care within the Australian healthcare system is among the best in the world, there is a need to change the paradigm currently being used to measure the outcomes and allocate resources. The Australian healthcare system is potentially dealing with two main problems: (a) resource allocation, and (b) performance and patient outcomes improvements. An interdisciplinary research approach in the areas of performance measurement, quality and patient outcomes improvement could be adopted to discover new insights, by using the policy implementation error/efficiency and bureaucratic capacity. Hospital managers, executives and healthcare management practitioners could use an interdisciplinary approach to design new performance measurement models, in which financial performance, quality, healthcare and patient outcomes are blended in, for resource allocation and performance improvement. This article recommends that public policy implementation error and the bureaucratic capacity models be applied to healthcare to optimise the outcomes for the healthcare system in Australia. In addition, it highlights the need for evaluation of the current reimbursement method, freedom of choice to patients and a regular scrutiny of the appropriateness of care.

Purpose – The purpose of this paper is to report on a study that examines an under-researched area, the use of information and communications technologies (ICT) in Australian home-based businesses (HBB). Design/methodology/approach – HBB constitute a large part of the economy, yet little is known of how they use ICT to improve their business operations. The study involved a case study comprising interviews with 30 business operators in the Western region of Melbourne, a major Australian city. The findings were analysed using a unique approach to Rogers’ (2003) Diffusion of Innovations, employing the innovation-decision process as a lens for the analysis. Findings – The study findings suggest that ICT application adoption in HBB participants is not uniform, with adoption of applications such as e-mail differing from adoption of newer applications, such as social networking. ICT use needs to be considered according to individual ICT applications and explained in the context of particular HBB. The study contributes to studies of innovation adoption, particularly in relation to the use of ICT applications in HBB. Research limitations/implications – It should be remembered that this study involved interviews with a broad selection of 30 HBB in the Western region of Melbourne, Australia. The results should be considered in the context of hypothesis generation in regards to HBB rather than hypothesis testing that can occur with larger samples. The authors feel that this study would be representative of the practices of ICT adoption in many such groupings of HBB in cities of major Western countries, but hesitate to claim that similar, specific uses of ICT applications would be matched elsewhere. Practical implications – This study has a number of practical implications. The results suggest that researchers should consider adoption of individual ICT applications in HBB. Further, policy makers looking to support the use of ICT by HBB should consider that the HBB in this study had adopted different ICT applications and were at different stages of ICT adoption. This is worth considering when deciding upon policies relating to how to suppzort the HBB sector (such as provision of training support and so forth). Originality/value – The paper introduces a unique means to assess the adoption of ICT applications by examining their level of penetration, level of maturity and usefulness to HBB.

Clinical Registries are established to provide a clinically credible means for monitoring and benchmarking healthcare processes and outcomes, to identify areas for improvement, and drive strategies for improving patient care. Clinical Registries are used to assess changes in clinical practice, appropriateness of care and health outcomes over time. The American Heart Association Policy Statement in April 2011 called for expanding the application for existing and future Clinical Registries, with well-designed Clinical Registry programs. Concurrently, in Australia, and similarly within the United States and United Kingdom, there has been an increased focus on performance measurement for quality and patient safety. Within Victoria, the Victorian Clinical Governance Policy Framework outlines clinical effectiveness as one of the four domains of Clinical Governance As Clinical Registries evaluate effectiveness and safety of patient care by measuring patient outcomes compared with peers, the use of Clinical Registries data to improve a health service’s quality of care seems intuitive. A mixed methods approach was utilised, involving (1) semi-structured interviews and (2) documentation audit in this study conducted at Austin Health, a major tertiary teaching hospital in North-Eastern metropolitan Melbourne, affiliated with the University of Melbourne and various research institutes within Austin LifeSciences. Although many studies have highlighted the benefits of data collected via individual Clinical Registries, [5,6] the level of voluntary medical staff participation in Clinical Registries at a health service level is yet to be established. The aim of this study was to document the level of medical staff involvement for Clinical Registries within a major tertiary teaching hospital, and the level of reporting into Quality Committees within the organisation. This study demonstrates that along with a very high level of medical staff participation in Clinical Registries, there is a lack of systematic reporting of Registries data into quality committees beyond unit level, and utilisation of such data to reflect upon practice and drive quality improvement. Abbreviations: CREPS – Centre for Excellence in Patient Safety; CSU – Clinical Services Unit; HOU – Heads of Unit; VASM – Victorian Audit of Surgical Mortality.

This chapter describes some aspects of the development of VICNET, an assemblage of computers, cables, modems, people, texts, libraries, buildings, dreams and images. It is a system that is difficult to characterise, it is dynamic both in geographical and ontological scope, size and usage. I have attempted to capture some of its nature through the use of several vignettes that may give the reader a small insight into parts of its being, then using some of the techniques and explanatory and exploratory mechanisms available from the field of science studies such as heterogeneous engineering and Actor Network Theory (ANT), I reveal some of the ways that VICNET came into existence. Many computer systems are undergoing continual evolution and it is extremely difficult to discern their configuration and what objects have agency at any given point in time; they can be thought of as open systems as described by Hewitt and de Jong (1984). VICNET, an Internet information provider established in 1994 as a joint venture between the State Library of Victoria and Royal Melbourne Institute of Technology, is one such system; it is being used by a large number of people and public libraries, yet simultaneously it is evolving and being shaped by the technology, the users and the environment of which it is part. Consider the system, VICNET as it is called, as a node of a much larger network. I have attempted to unfold this node to reveal the social and technical worlds contained therein, but I also fold the VICNET node in itself so that it becomes part of a much larger sociotechnical system – the Internet. This process of folding I refer to as a topological transformation and it is by studying transformations of this type that may help us understand how open systems come into being and evolve. In what follows, I provide a brief background to VICNET and the data collection method I used. Next, I discuss some the analytical techniques that are available for those who wish to study the development of technological systems. Following this all-too-brief comment I then present a selection of vignettes that show the varied nature of this socio-technical system. Presenting these then allows me to develop further the idea of social topologies introduced in the section on analytical techniques. In the final section there is some discussion as to why this way of looking at socio-technical systems may be useful.

EXPERIMENTAL STUDY OF MICROWAVE SLOW WAVE COMB AND CERAMIC APPLICATORS FOR SOIL TREATMENT AT FREQUENCY 2.45 GHZ. G. Brodie and G. Torgovnikov University of Melbourne, 4 Water St, Creswick, Victoria 3363, Australia; e-mail: grigori@unimelb.edu.au Keywords: ceramic applicator, comb applicator, microwave, slow wave, soil microwave treatment In many cases in industry it is required to heat or treat surface layers of different material (soil, timber, concrete, plastics and so on) with microwaves (MW). Traditional MW irradiators (antennas) cannot provide heating only in the surface areas and energy penetrates deep into the material, where it decays exponentially due to normal attenuation. Therefore, energy losses, if a heating depth of 20 - 40 mm (for example to heat soil for killing weed seeds) is all that is required, are very significant. Therefore, it is required to develop special MW applicators for surface treatment to increase process efficiency. To address this problem, a slow wave (which is sometimes called a "surface wave" applicator) comb and ceramic structures, was studied. The main property of slow waves is that the energy concentration is very near impedance electrode – comb or ceramic plate surface. Previously, slow wave structures were used mostly as delay lines and as interaction circuits in MW vacuum devices, and their properties were explored only for these specific applications. The work objectives of this study were: design slow wave, ceramic and comb structure applicators for soil treatment at frequency 2.45 GHz;experimentally study the energy distribution from slow wave applicators in the soil;study of opportunities to use slow wave structures for surface soil layer heating; andrecommendations for practical use of new slow wave applicators. Comb and ceramic slab applicators for frequency 2.45 GHz operation were designed for the soil treatment on the bases of theoretical studies and computer modelling. The comb applicator was made from aluminium and the ceramic slab applicator was made from alumina (DC=9.8, loss tangent=0.0002). A 30 kW (2.45 GHz) microwave generator was used for experiments. Containers with soil were placed on the applicator surface. An auto tuner was used in MW system to provided good impedance matching of the generator and applicators (with soil on top). This resulted in practically no power reflection. The soil “Potting Mix Hortico”, with moisture content range 32-174% and density range 590-1070 kg/m3, was used for the experiments. Energy distribution in the soil was determined by temperature measuring in the soil using thermocouples, after MW heating. Distribution of temperature measuring points covered the whole volume of the soil along and across the applicator. Results of the experiments showed that the comb applicator provides maximum energy release in soil in the central vertical plane. The ceramic alumina applicator forms two temperature maximums in two vertical planes at a distance of about 40 mm from the central applicator plane and a minimum in the applicator central plane. The ceramic applicator provides better uniformity of energy distribution across the width of the applicator due to the two temperature maximums. It reduces overheating of the soil surface and energy losses. The depth of energy penetration provided by ceramic applicator is lower compared with the comb applicator. It means that the ceramic applicator provides better energy localization and more energy absorption in the soil surface layers compared with the comb applicator. To provide better uniformity of energy distribution across the ceramic applicator it is recommended to use ceramics with higher dielectric constants, such as in the range of 15-25, which will allow more energy to be released closer to the applicator surface. It will increase efficiency of MW energy use. The ceramic applicator is more effective for MW treatment of the soil surface areas and is recommended for practical use in machines for thermal treatment and sterilization of surface layers of the soil and other materials.