Log in

Relevant bibliographies by topics / Lepené dřevo

Contents

Dissertations / Theses

Academic literature on the topic 'Lepené dřevo'

Author: Grafiati

Published: 28 June 2021

Last updated: 17 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Lepené dřevo.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Dissertations / Theses on the topic "Lepené dřevo"

1

Kovács, Pavel. "Konstrukční lamelové dřevo vyztužené kompozitními materiály." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225726.

Full text

Abstract:

This master’s thesis describes an experimental program investigating the strengthening of beams of glued laminated timber with composite reinforcement. The work compares the behavior of beams reinforced with composite reinforcement with unreinforced beam and with solid timber beam. The work also deals with identifying and evaluating the physic-mechanical properties of materials.

APA, Harvard, Vancouver, ISO, and other styles

2

Prokop, Miroslav. "Rozhledna v Beskydech." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-409842.

Full text

Abstract:

This master thesis deals with the design of load-bearing capacity of the observation tower in Besky-dy. The material used in main column is steel S355. The main column is a circular hollow construc-tion with diameter of 2,2 m. Inside the column is located a double spiral staircase. The upper part of observation tower simulates shape of treetop by rip column. It is made of glue laminated timber GL24h. The tower has four platforms of hexagon shape. The largest platform is 12,2m wide. The height of struction is 37,5 m. Internal forces have been calculated in software RFEM and based that the structural assessment has been made. The thesis is drawn up pursuant to the standards of ČSN EN.

APA, Harvard, Vancouver, ISO, and other styles

3

Jakubíček, Tomáš. "Jízdárna." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265655.

Full text

Abstract:

In diploma thesis i designed supporting strukture of roofing for riding hall located in Pardubice. Building height is 9,5m and the other two dimensions are 48,7x77,5m. The actual frame with elliptically shaped truss system. The actual structure is formed from a conventional timber of different cross-section. Roof is supported by trapezoidal sheet. wooden elements are connected by steel plates, pins and bolts. Chosing variants depends on material price and manufacturing cost. A goual of my diploma thesis is to make static calculations and drawings.

APA, Harvard, Vancouver, ISO, and other styles

4

Janoušek, Martin. "Vícepodlažní budova." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227818.

Full text

Abstract:

This master's thesis deals with design of the timber structure four-storey building. Plan dimensions of the hall are 20 x 30 m. The structure is designed for the Třebíč. The structure is designed as a heavy timber frame. The axial distance of arches is 5 m. The timber structure is placed between the reinforced concrete towers.

APA, Harvard, Vancouver, ISO, and other styles

5

Vincour, Jan. "Aquapark." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226897.

Full text

Abstract:

Object of Diploma thesis is the structural design of a load bearing structure of the aquapark in the Brno area. The main structure is designed as lamella arch on the cylindrical surface with one curvature with 30 m span and 4.5 m camber. The structural material is glue-laminated timber with inner steel plate joints.

APA, Harvard, Vancouver, ISO, and other styles

6

Matouš, Petr. "Ekodukt na dálnici D1." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-227152.

Full text

Abstract:

The master’s thesis focuses on suitable design of an ecoduct on the highway D1 near Jihlava. It includes a structural analysis of reinforced concrete strip footings and wooden beams in all phases of construction. The material of the main bearing system is glued laminated timber GL24h. An important part of three-jointed ecoduct wooden arched beams is well-chosen isolation.

APA, Harvard, Vancouver, ISO, and other styles

7

Kučera, Vít. "Studium odolnosti lepené spáry dřeva proti vyšším teplotám." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265260.

Full text

Abstract:

In this time are for design of wooden elements available simplified procedures for fire modeling which defines ČSN EN 1991-1-2. But it is not experimentally tested the impact of adhesive on the final value of fire resistance of laminated panels. This diploma thesis solves basic normative practices that could explain the durability of glue bond against increased temperatures. in the practical part will be undertaken to experimentally assess the impact of various kinds of adhesive-based (epoxy, formaldehyde, PUR and EPI) on the glued bond durability against increased temperature. Glued joints that will be subjected to gradual temperature exposure in order to assemble the dependence of the temperature influence on the final strength of the joint according to the type of adhesive.

APA, Harvard, Vancouver, ISO, and other styles

8

Vojta, Radek. "Zastřešení planetária." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265445.

Full text

Abstract:

The aim of the final thesis was to design and assess timber loadbearing structure of planetarium located in Brno and height of the construction 10 m. Designed building of planetarium consists of dome and hall, which operate separately. The structure is designed from glue laminated timber, solid timber and steel bracing, ridge ring and connecting elements. Building foundations is solved by reinforced anchor blocks fixed to foundation pads, which are connected by foundation strips. Loadbearing structure of the dome consists of arched beams together with purlins and ridge ring. Stability is ensured by 4 fields of cross bracing located between purlins. Loadbearing structure of the hall consists of roof and wall beams connected by frame corners together with roof and wall purlins. In gable walls is structure complemented by columns. Stability is ensured by diagonal and vertical elements situated between wall purlins, which together form a truss system.

APA, Harvard, Vancouver, ISO, and other styles

9

Turková, Martina. "Rozhledna na jižní Moravě." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240264.

Full text

Abstract:

This master’s thesis deals with the design and static assessment of a lookout tower in The Brno Zoological Garden situated on the hill called Mniší hora. The construction of the lookout tower is meant to be of a circular ground plan and its overall height is 31 m. The construction was designed in two variants. For both methods was used a combination of steel and solid or glued laminated timber. For detailed elaboration was selected only one variant. The lookout tower was assessed in a Scia Engineer 15.1 software.

APA, Harvard, Vancouver, ISO, and other styles

10

Špačková, Eva. "Multifunkční objekt v Českých Budějovicích." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240487.

Full text

Abstract:

The subject of this thesis is the design and assessment of the supporting structure multifunctional building in the Czech Budejovice . The construction of a sphere with a maximum diameter of 30 m and a height of 19.5 meters the highest point . The supporting structure consists of curved ribs , elevator shaft and ceiling beams . The structure is designed in 4 versions . Two variants are made of steel, the third option is wooden and the latest version solves a combination of wood and steel. In the variant selected is done loading , ultimate limit state, serviceability limit state , fire resistance and compounds selected details.

APA, Harvard, Vancouver, ISO, and other styles

More sources

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!