Relevant bibliographies by topics / Laserový snímač

Contents

  1. Dissertations / Theses

Academic literature on the topic 'Laserový snímač'

Author: Grafiati
Published: 28 June 2021
Last updated: 10 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Laserový snímač.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Dissertations / Theses on the topic "Laserový snímač"

1

Janík, Vladimír. "Chytré čerpadlo na čerpání vody z nádrže." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2021. http://www.nusl.cz/ntk/nusl-442364.

Full text
Abstract:
This thesis deals with the implementation of a system for measuring the amount of water in the tank using a 12V water pump. The whole system is controlled by the ESP32 microcontroller. The introduction deals with the theoretical analysis of various principles of measuring the level of liquids. The next part deals with the procedure of the construction of the measuring device and its theoretical analysis. The last part of the work deals with the control of the pump and the individual functions that provide this control. The ultrasonic distance sensor AJ-SR04M was chosen for the implementation of the device. The volume of water in the tank is calculated from its data. The ESP32 microcontroller provides system control via a web interface. The whole system was implemented and tested to measure the volume of water and its pumping in the IBC container.
APA, Harvard, Vancouver, ISO, and other styles
2

Kalvodová, Petra. "Kalibrace snímačů pro multispektrální datovou fúzi v mobilní robotice." Doctoral thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-390238.

Full text
Abstract:
Thesis deals with data fusion and calibration of sensory system of Orpheus-X3 robot and EnvMap mapping robot. These robots are parts of Cassandra robotic system that is used for exploration of hazardous or inaccessible areas. Corrections of measured distances are determined for used laser scanners Velodyne HDL-64, Velodyne HDL-32 and range camera SwissRanger SR4000. Software MultiSensCalib has been created and is described. This software is used for determination of intrinsic parameters of heterogeneous cameras of the sensory head and for determination of mutual position and orientation of these sensors. Algorithm for data fusion of CCD camera stereo pair, thermal imager stereo pair and range camera is proposed. Achieved calibration and data-fusion parameters are evaluated by several experiments.
APA, Harvard, Vancouver, ISO, and other styles
3

Škrob, Robin. "Digitalizace snímaní rozložení optické intenzity." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-217685.

Full text
Abstract:
This Master’s thesis solves a design and construction of device for gathering and transfer of data into computer. The device should replace graph plotter, by which is measured the optical intensity of a laser beam. From this characteristic it is possible to determine other parameters of the laser beam, such as halfwidth of the beam, angle of divergence and Rayleigh length. The described device - “data gatherer” - measures two voltage values – voltage detected on photodiode and voltage detected on distance moved by photodiode. Measured values of voltage are processed and sent through a serial line into the computer. A pre-amplifier is connected to the control part for both channels of measured values with possibility of amplification. Computer application, which performs graphic interpretation of the measured values, serves as user control peripheral. The product of this project is compact device operating under OS Windows with graphic output.
APA, Harvard, Vancouver, ISO, and other styles
4

Tomášek, Ondřej. "Robot pro práci ve vnějším terénu." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-217565.

Full text
Abstract:
This work deals with navigation of the mobile outdoor robots. It is divided in two parts. In the first part, the mobile robots and their control problem is examined. The technical means for navigation and obstacles avoidance are described and the mathematical means for sensor data fusion and optimal position estimation of the robot are outlined. In the second part the hardware of the robot is described and furthermore it deals with description of the practically realized algorithms for obstacles avoidance and robot navigation.
APA, Harvard, Vancouver, ISO, and other styles
5

Pokorný, Tomáš. "Koregistrace dat leteckého laserového skenování a leteckých měřických snímků." Master's thesis, 2013. http://www.nusl.cz/ntk/nusl-323447.

Full text
Abstract:
Coregistration of airborne laser scanning data and aerial images Abstract This thesis is dealing with the co-registration of aerial laser scanning and aerial images. Theoretical part with research of current methods puts emphasis on methods suitable for remote sensing datasets. Part of the thesis is about pre-processing data for co-registration and DSM production. Selection of co- registration methods for remote sensing is based on previous researches. Selected co-registration methods are applied on datasets from EuroSDR research project and ČÚZK dataset. Application is realised by programming codes and functions that were created for this purpose in Matlab. Possibilities of usage, advantages and disadvantages of methods are being mentioned in the next parts of the thesis with emphasis on time of the computation and final accuracy. The function programmed in Matlab allows comparison of co-registration methods and allows the user to decide which of the co- registration methods to use on input datasets. Discussion section describes the possibilities of method extensions and problematic parts across the whole co-registration process. Keywords: co-registration, laser, scanning, images, photogrammetry, remote sensing, coordinate, image matching.
APA, Harvard, Vancouver, ISO, and other styles
6

Jebavá, Lucie. "Využití optických a laserových dat k modelování lesních porostů." Master's thesis, 2018. http://www.nusl.cz/ntk/nusl-373039.

Full text
Abstract:
The thesis deals with the possible use of optical data for modeling forest area compared with utilization of airborne laser scanning data. At first these two datasets are compared and causes of differences are explained. Then canopy height models are made and object-oriented classification is applied for separation of vegetation stands. Methodical procedure is suggested for delineation and detection individual trees in forest. Then their height is detected. There are summarized and other possibilities for improvement in detection and delineation of trees. The results show that optical data with resolution about 25 cm are suitable for dermining the characteristics of the forest stands up to individual tree level. The outputs of this research can be used for forest inventory. Key words: aerial imagery, image matching, laser scanning, point cloud, forest inventory
APA, Harvard, Vancouver, ISO, and other styles
7

Bromová, Petra. "Analýza hustoty lesních porostů s využitím texturálních příznaků snímků vysokého prostorového rozlišení a dat leteckého laserového skenování." Master's thesis, 2012. http://www.nusl.cz/ntk/nusl-306713.

Full text
Abstract:
Analysis of forest canopy density based on textural features of high resolution imagery and airborne laser scanning data Abstract The objective of this thesis is to assess the forest canopy density in the Šumava Mountains, Czech Republic. The spruce forests in this area have been suffering from the bark beetle outbreak for almost 20 years resulting in a mixture of dead and young trees, mature forest stands and peat bogs. The canopy density was evaluated using a very high spatial resolution panchromatic imagery and low point density LiDAR, combined with an object oriented approach. The classification based on three GLCM texture measures (contrast, entropy and correlation), which were derived from the image objects, resulted in a kappa index of accuracy of 0.45. Adding the information from the LiDAR data, the accuracy of the classification improved up to 0.95.
APA, Harvard, Vancouver, ISO, and other styles
8

Kuchařová, Jana. "Klasifikace silniční sítě z dat leteckého laserového skenování a optických dat DPZ vysokého rozlišení." Master's thesis, 2013. http://www.nusl.cz/ntk/nusl-323421.

Full text
Abstract:
Classification of road network from airborne laser scanning data and from remote sensing images with high resolution Abstract Object classification of land cover is currently one of the methods of remote Earth exploration. Road network classification only is unique because it is covered with anthropogenic material and has different characteristics than other elements of the landscape. This work deals with the possibility of using a combination of data from airborne laser scanning and high resolution optical data for detection of the road network in the specific area. The premise is that the use of two different types of data could provide better results, because airborne laser scanning data provide very precise information about the position and height of the point, while satellite data of very high resolution represent the real landscape. Searching for suitable features and classification rules for unambiguous determination of the road network is one of the objectives of the work. Segmentation parameters will also be important for object classification. Another objective is to verify the transferability of classification schemes into the other scene. The results should present a response on whether a procedure can be applied over a different location and also that the use of two types of data can bring...
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography