Relevant bibliographies by topics / Laserové technologie / Dissertations / Theses
To see the other types of publications on this topic, follow the link: Laserové technologie.

Dissertations / Theses on the topic 'Laserové technologie'

Author: Grafiati
Published: 28 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 24 dissertations / theses for your research on the topic 'Laserové technologie.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Urban, Jan. "Realizace laserové technologie." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230017.

Full text
Abstract:
The aim of this thesis is to describe the replacement of wire cutting laser cutting for cutting inserts made of hard material. Description of current situation in the company Vydona, tender and choice of laser and the need for post-laser workshop. The next section deals with the cutting of a particular sample. The last part of the technical economic assessment are calculated hourly rates of machines and the time and cost loads of different cutting inserts.
APA, Harvard, Vancouver, ISO, and other styles
2

Zlesák, Jakub. "Trendy vývoje LASERové technologie." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-228109.

Full text
Abstract:
The basic acquaintance with laser technology principles. The consideration and evaluation of this technology present state in engineering. The possibilities of applying new knowledge and discoveries in this field for using in engineering. The estimation of laser technology development within further 5 years and consideration of this technology economical demands.
APA, Harvard, Vancouver, ISO, and other styles
3

Popela, Martin. "Nasazení laserové technologie v podmínkách zakázkové výroby." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228421.

Full text
Abstract:
The thesis is focused on theoretical analysis and physical description of laser beam technology. It deals with possibilities and concrete methods of laser technologies in perspective of metal machining and in detail it describes CO2 laser and its inclusion to the manufacturing process in concrete engineering company. Further it describes the components base and the construction technology of typal representatives. The thesis includes the proposition of solution of increase the productivity of the laser workplace and also technical and economical evaluation of this technology.
APA, Harvard, Vancouver, ISO, and other styles
4

Kramoliš, Lukáš. "Laserové řezání s podporou vzduchu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229292.

Full text
Abstract:
This project, elaborated within the engineering studies (code of field of study: N2301), deal with air supported laser cutting and its practical usage in industry. The project is divided into theoretical and experimental sections, consisting of detailed description of several successive steps of the experiment. The theoretical section describes the principle and function of laser, individual types of lasers and their classification, laser beam properties, laser cutting, etc. The practical part is focused on finding of a set of optimal cutting parameters, assessment of results of air supported laser cutting in terms of quality and accuracy of cutting surface. This part is followed by comparison of cutting surfaces with a conventional technology of laser cutting that uses oxygen and nitrogen. Final part of the project evaluates applicability of this unconventional technology from the economic point of view.
APA, Harvard, Vancouver, ISO, and other styles
5

Jedličková, Veronika. "Využití laserové skenovací hlavy pro povrchové kalení." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-443208.

Full text
Abstract:
The diploma thesis addressed the issue of laser surface hardening using dynamic oscillation of the laser beam. The theoretical part presents the hardening technology and suitable using of laser equipments. The fiber laser YLS 2000 was used in the experiment and the hardened material was steel 12 050, which is suitable for laser hardening. The influence of two selected parameters of the scan head on the resulting structure and hardness of hardening layers was examined. Based on the results, the choice of optimal parameters for identical conditions with the experiment was recommended.
APA, Harvard, Vancouver, ISO, and other styles
6

Podaný, Petr. "Optimalizace technologie laserového dělení trubek se čtvercovým průřezem." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-382121.

Full text
Abstract:
The master thesis deals with the design and manufacture of tabbed joint in the profile with a square cross section using laser cutting. They examine their suitability and impact on the following MAG welding operation in terms of efficiency and accuracy. The theoretical part provides basic information about lasers used in industry and laser cutting methods. There is also a section dedicated to laser apparatus for tube cutting along with problematic about the laser cutting profiles. The experimental part describes the procedure of designing tabbed joint, making samples and measuring them. In the end, the individual samples are compared in terms of angular deflection after welding. The thesis also contains a technical-economic evaluation, where the costs of individual operations are quantified.
APA, Harvard, Vancouver, ISO, and other styles
7

Žák, Tomáš. "Využití hybridní technologie Laser-TIG pro svařování rozdílných materiálů používáných v energetice." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-400985.

Full text
Abstract:
Thesis is focused on analyzing the influence of preheating process parameters using electric arc from TIG torch during laser welding on weld properties of stainless steel and carbon steel with higher strength. In this thesis experiment was done in which metal sheets 3 mm thick from X12Cr13 and S355 steels were welded. Welding was done first with using only laser, then laser with TIG preheating and lastly laser with preheated material by induction heater. When TIG preheating was used than set welding current was changed on the power source. The welds were subsequently evaluated based on macrostructure, microstructure and Vickers hardness test.
APA, Harvard, Vancouver, ISO, and other styles
8

Kachlíř, Jaromír. "Využití hybridní technologie Laser-TIG pro svařování bórem dopovaných vysokopevnostních ocelí." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-402499.

Full text
Abstract:
This thesis deals with the usage of arc preheating for welding high strength boron enhanced steel 22MnB5 using hybrid technology known as laserTIG and also its impact on the final weld compared to welds welded by only the laser or the arc method. During the experiment I welded five sheets of the above mentioned steel 1,3 or 1,9 milimeters wide. Except for the welds fabricated by the laser and the TIG method was the only variable the electric current of the arc (I = 20, 40, or 60 A). Welds welded this way were compared based on strength limits measured by the tensile tests. Additionally were they compared according to the metalographic survey and the progress of weld hardness, calculated using the Vickers hardness test.
APA, Harvard, Vancouver, ISO, and other styles
9

Drápela, Petr. "Využití hybridní technologie Laser-TIG pro svařování hliníkových slitin." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-399437.

Full text
Abstract:
Different problems arise from choice of setting technological parameters during welding of alluminium alloys. Choice of welding method, welding speed and material influence mechanical properties of welds. During welding of alluminium alloys come difficulties due to oxidation of thin surface layer of material. One of ways how to overcome this obtacle is to use hybrid laser-TIG welding method. In this diploma thesis is described influence of welding processes on mechanical properties of two alluminium alloys(EN AW-5754 H22, EN AW-6082 T6) and change in their microstructure during welding.
APA, Harvard, Vancouver, ISO, and other styles
10

Krejčí, Adam. "Svařování oceli 22MnB5 pomocí hybridní technologie Laser-TIG." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417452.

Full text
Abstract:
This thesis deals with usage of hybrid technology Laser-TIG for welding of boron enhanced steel 22MnB5. This thesis evaluates the influence of preheating using technology of TIG arc welding to a weld quality in comparison with laser welds. In practical part of thesis there were 1,8 mm metal sheets of 22MnB5 welded. This metal sheet specimens were welded by using constant parameters of laser with varying parameters of TIG technology. There were 12 specimens of sheet metal created including 3 specimens using only laser and 9 specimens using Laser-TIG hybrid technology while varying magnitude of current (I=20 A, 40 A a 60 A). Welds created this way were evaluated by tensile test and strength limits compared. Then metalografic survey was carried out examining macro and microstructure. Results of metalografic survey were confronted with Vickers hardness test.
APA, Harvard, Vancouver, ISO, and other styles
11

Guráň, Radoslav. "Konstrukce nanášecího systému pro zpracování dvou kovových prášků pomocí 3D tisku." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-399327.

Full text
Abstract:
The thesis deals with the design, construction and testing of two different metal powder coating equipment, which is able to work with SLM 280HL metal 3D printer. Since the field of multimaterial metal printing by selective laser melting (SLM) has not been significantly investigated yet, an overview of existing patents and possible approaches to the solution has been developed. The device has been successfully designed and a series of tests was carried out defining the issue of applying an improved head that uses a nozzle and an eccentric vibration motor. Based on the experiments performed, the coating parameters of the multimaterial layer of FeAm and 316L materials were defined. A control system for the partial process automation was created for the proposed device. The device was implemented in a printer that demonstrated both the ability to apply a single multimaterial layer of at least 50 m thickness, and the ability to produce a 3D multimaterial component comprised of up to 200 layers and containing material change across all axes.
APA, Harvard, Vancouver, ISO, and other styles
12

Indra, Jaroslav. "Nekonvenční technologie laserového řezání." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229654.

Full text
Abstract:
The thesis deals with the technology of laser cutting. The beginning is concerned with a general description of laser technology and laser division into basic groups. Next part refers to possible industrial use of laser beam, especially for cutting. Other chapters deal with the components suitable for the manufacture of this technology, technical preparation of production and the proposal to increase manufacturing flexibility when changing products. The last part is devoted to technical and economic evaluation.
APA, Harvard, Vancouver, ISO, and other styles
13

Cicha, Tereza. "Renovace licích forem technologií laserového navařování." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417117.

Full text
Abstract:
The diploma thesis deals with study of laser cladding technology and possibilities of its use in renovation of casting molds made of hot-work tool steel. The theoretical part describes methods of laser cladding, testing methods and characteristics of the base material and its heat treatment. In the experimental part the test clads, and the metallographic samples were made. The samples were evaluated in terms of macrostructure and microstructure, especially clad geometry, dilution, and defects like pores and cracks. Microhardness was also measured. In conclusion a technical and economic evaluation was performed.
APA, Harvard, Vancouver, ISO, and other styles
14

Hort, Zbyněk. "Parametry laserového paprsku." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318845.

Full text
Abstract:
The diploma thesis consists of the three main parts. The first part deals with the theoretical description of the laser technology and other unconventional technologies. In the second part, the thesis is focused on testing the parameters of the laser and evaluating the most suitable parameters. In the last part the diploma thesis deals with comparison of unconventional technologies in terms of cut quality
APA, Harvard, Vancouver, ISO, and other styles
15

Klazar, Martin. "Stanovení stupně vtažení zinkové povrchové vrstvy do hrany součástky v závislosti na použité technologii výroby - laserové řezání, vysekávání." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231072.

Full text
Abstract:
The project, developed under the terms of engineering studies of the M-STG Manufacturing Technology branch, presents the analytical assessment of the cutting surface of the metal sheet by two most commonly used modern technologies of cutting, which is the laser beam division and the exact cutting. The evaluation of this area was mainly focused on the level of the penetration of the zinc surface layer in the area of the given cutting. With the help of modern methods of electron microscopy, these values of penetration were then estabilished for each technology. The analysis itself was preceded by literary studies of all individual parts participating in this experiment.
APA, Harvard, Vancouver, ISO, and other styles
16

Šoukal, Hynek. "Optimalizace výroby součástky z konstrukční oceli tl. 20 mm technologií laserového dělení." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-317197.

Full text
Abstract:
The thesis deals with the optimization of process parameters in the oxidative laser cutting of structural 20 mm thick steel with regard to the type of material, the resulting roughness of the cut and the resulting price of the product. In line with the literary study and the Taguchi method, an experiment was developed. The cutting speed, laser performance, cutting gas pressure, and focal position were controlled during the experiment. Sample sets were cut with 7.5" and 10" focusing lens from the TATA STEEL S355MC and SSAB LASER 355 MC steels. According to ČSN EN ISO 9013, the samples were evaluated for roughness. Then micro and macro structures were evaluated, and compare the hardness according to Vickers. In conclusion, technical and economic evaluation was determined.
APA, Harvard, Vancouver, ISO, and other styles
17

Vinopalová, Pavla. "Návrh dřevěné stavebnice." Master's thesis, Česká zemědělská univerzita v Praze, 2016. http://www.nusl.cz/ntk/nusl-258075.

Full text
Abstract:
This thesis describes the design of wooden building kit on the principle of gears. Summarizes the problems of calculations and graphic design for gears, work with computer software, and then the laser and the CNC device. Presents the pros and cons of making such building kits in both machining methods and draws conclusions about their suitability and economy. Provides overall production process, from market research (which similar building kits are usually trade in Czech republic nowadays), the numerical and graphic design, to verifying the functionality of the prototype. The thesis is based on scientific literature that addresses the issue of gears, tooling, surface finish of wood etc. It must also take into account the Czech legislation and standards concerning toys.
APA, Harvard, Vancouver, ISO, and other styles
18

Kutil, Petr. "Studium plasticity svaru hlubokotažných plechů svařených technologií Laser-TIG." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-443205.

Full text
Abstract:
This thesis is focused on laser welding and hybrid laser-TIG welding. The first part contains a brief theoretical description of these technologies. Standard quality and plasticity tests of welded joint are also mentioned. The second, experimental part, centres on the study of plasticity of tailored blanks (made of different types of HSLA steel), that are welded with laser and laser-TIG technology. The aim of the thesis is to assess process parameters effect on weld suitability for following deep drawning operation. Based on the calculated and measured figures obtained from the experiment, the most suitable welding parameters were chosen.
APA, Harvard, Vancouver, ISO, and other styles
19

Král, Zdeněk. "Nasazení nekonvenční technologie řezání laserem do technologického procesu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228637.

Full text
Abstract:
Applycation of laser beam technology to technological process. The kinds of laser dividing, its safety and arrangement. Technology-economical advantage in production of aluminium table. Description of laser machine and workshop and whole company.
APA, Harvard, Vancouver, ISO, and other styles
20

Chaloupková, Lucie. "Navržení vhodných technologií výroby zadané ploché součásti z plechu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229914.

Full text
Abstract:
The project is elaborated in frame of engineering studies branch 2303T002. The project is submitting suggestion of convenient technologies of production for submitted flat sheet metal part 11 375. There are proposed a number of variants of production method, namely: production on sequence shearing tool, production by means of plasma machine, laser machines and machines for watejets cutting. Particular part is designed for the production quantity of 380 000 pieces per year. Based on the literary study of the shear and calculations, there were designed shearing tool for given part. For this tool the press CDCH 3000 P was selected (producer HESSE+CO Maschinenfabrik GmbH), with nominal force 3 000 kN. In the work there are included necessary calculations for all variants including technological and economical evaluation.
APA, Harvard, Vancouver, ISO, and other styles
21

Attasek, Radek. "Technologie výroby vysokotlakého zásobníku paliva a její kontrola." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231680.

Full text
Abstract:
This thesis is focused on the analysis of current state of production technology and quality control of high-pressure reservoir. It deals mainly on the macro-metallographic test of the quality and position of the weld, the posibility of it´s implementation, organization of workplace. Task of this thesis is to find alternative methods of testing. Part of thesis is design and implementation of a new workplace´s layout based on experiment with using of alternative method of testing and assessment of implementation to achal process. The main objective is to improve the working condition and reduction of time for testing.
APA, Harvard, Vancouver, ISO, and other styles
22

Pecháček, Martin. "Hodnocení kvality povrchu při řezání u technologie AWJ a WJM." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-228934.

Full text
Abstract:
This study deals with technology of abrasive water jet material cutting and influence of cutting head feed rate on surface topography of cut walls with regards to roughness. Eight parameters were chosen based on the CSN EN ISO 4288 standard representing quality of surface after AWJ cutting. When AWJ cutting the chosen material – commercially pure ASTM B265 grade 2 titanium – feed rate was being changed and in order to obtain information about each parameter´s distribution in various depths of the cut, surface composition was evaluated. It was found out that feed rate has significant influence on surface and that the profile elements´ width grows when increasing the feed rate and cut depth. Furthermore, two selected feed rate results were compared to laser beam technology and conclusion for the selected material was made that AWJ cutting is more preferable due to final roughness and no heat affect on the material.
APA, Harvard, Vancouver, ISO, and other styles
23

Šebela, Pavel. "Aplikace nekonvenčních paprskových technologií(LASER/plazma)ve strojírenství." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-228098.

Full text
Abstract:
The description and characteristic of the material cutting process technology by means of laser and plasma beams. The safety of both technologies. Technical-economic comparison of both material cutting methods. The evaluation of the cutting quality according to ČSN EN ISO 9013 Standard.
APA, Harvard, Vancouver, ISO, and other styles
24

Malát, Jan. "Technicko-ekonomické porovnání nekonvenčních technologií AWJ a LBM z hlediska potřeb firmy." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229944.

Full text
Abstract:
This study deals with unconventional materials cutting technology with a fo-cus on abrasive water jet cutting and CO2 laser. The thesis is divided into theoretical and experimental section. The theoretical part describes principles and functions of nonconventional technologies, the basic division and practical applications. The practical part is focused on choosing the best technology with the production of samples and their subsequent comparison. The thesis recommends producer and type of the machine which best meets requirements on basis of the test results.
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography