Relevant bibliographies by topics / Laser ablation

Academic literature on the topic 'Laser ablation'

Author: Grafiati
Published: 4 June 2021
Last updated: 8 June 2024

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Laser ablation.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Laser ablation"

1

Munier, Sean M., Eric L. Hargreaves, Nitesh V. Patel, and Shabbar F. Danish. "Ablation dynamics of subsequent thermal doses delivered to previously heat-damaged tissue during magnetic resonance–guided laser-induced thermal therapy." Journal of Neurosurgery 131, no. 6 (December 2019): 1958–65. http://dx.doi.org/10.3171/2018.7.jns18886.

Full text
Abstract:
OBJECTIVEIntraoperative dynamics of magnetic resonance–guided laser-induced thermal therapy (MRgLITT) have been previously characterized for ablations of naive tissue. However, most treatment sessions require the delivery of multiple doses, and little is known about the ablation dynamics when additional doses are applied to heat-damaged tissue. This study investigated the differences in ablation dynamics between naive versus damaged tissue.METHODSThe authors examined 168 ablations from 60 patients across various surgical indications. All ablations were performed using the Visualase MRI-guided laser ablation system (Medtronic), which employs a 980-nm diffusing tip diode laser. Cases with multiple topographically overlapping doses with constant power were selected for this study. Single-dose intraoperative thermal damage was used to calculate ablation rate based on the thermal damage estimate (TDE) of the maximum area of ablation achieved (TDEmax) and the total duration of ablation (tmax). We compared ablation rates of naive undamaged tissue and damaged tissue exposed to subsequent thermal doses following an initial ablation.RESULTSTDEmax was significantly decreased in subsequent ablations compared to the preceding ablation (initial ablation 227.8 ± 17.7 mm2, second ablation 164.1 ± 21.5 mm2, third ablation 124.3 ± 11.2 mm2; p = < 0.001). The ablation rate of subsequent thermal doses delivered to previously damaged tissue was significantly decreased compared to the ablation rate of naive tissue (initial ablation 2.703 mm2/sec; second ablation 1.559 mm2/sec; third ablation 1.237 mm2/sec; fourth ablation 1.076 mm/sec; p = < 0.001). A negative correlation was found between TDEmax and percentage of overlap in a subsequent ablation with previously damaged tissue (r = −0.164; p < 0.02).CONCLUSIONSAblation of previously ablated tissue results in a reduced ablation rate and reduced TDEmax. Additionally, each successive thermal dose in a series of sequential ablations results in a decreased ablation rate relative to that of the preceding ablation. In the absence of a change in power, operators should anticipate a possible reduction in TDE when ablating partially damaged tissue for a similar amount of time compared to the preceding ablation.
APA, Harvard, Vancouver, ISO, and other styles
2

Munier, Sean M., Allison S. Liang, Akshay N. Desai, Jose K. James, and Shabbar F. Danish. "Characterization of Magnetic Resonance Thermal Imaging Signal Artifact During Magnetic Resonance Guided Laser-Induced Thermal Therapy." Operative Neurosurgery 19, no. 5 (July 31, 2020): 619–24. http://dx.doi.org/10.1093/ons/opaa229.

Full text
Abstract:
Abstract BACKGROUND Magnetic resonance-guided laser interstitial thermal therapy (MRgLITT) is a minimally invasive procedure that utilizes intraoperative magnetic resonance thermal imaging (MRTI) to generate a thermal damage estimate (TDE) of the ablative area. In select cases, the MRTI contains a signal artifact or defect that distorts the ablative region. No study has attempted to characterize this artifact. OBJECTIVE To characterize MRTI signal the artifact in select cases to better understand its potential relevance and impact on the ablation procedure. METHODS All ablations were performed using the Visualase magnetic resonance imaging-guided laser ablation system (Medtronic). Patients were included if the MRTI contained signal artifact that distorted the ablative region during the first thermal dose delivered. Ablation artifact was quantified using MATLAB version R2018a (Mathworks Inc, Natick, Massachusetts). RESULTS A total of 116 patients undergoing MRgLITT for various surgical indications were examined. MRTI artifact was observed in 37.0% of cases overall. Incidence of artifact was greater at higher powers (P &lt; .001) and with longer ablation times (P = .024), though artifact size did not correlate with laser power or ablation duration. CONCLUSION MRTI signal artifact is common during LITT. Higher powers and longer ablation times result in greater incidence of ablation artifact, though artifact size is not correlated with power or duration. Future studies should aim to evaluate effects of artifact on postoperative imaging and, most notably, patient outcomes.
APA, Harvard, Vancouver, ISO, and other styles
3

SUGIOKA, Koji, Satoshi WADA, Hideo TASHIRO, and Koichi TOYODA. "Laser Ablation. Ablation Using Vacuum-Ultraviolet Lasers." Review of Laser Engineering 25, no. 4 (1997): 283–87. http://dx.doi.org/10.2184/lsj.25.283.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Fan, Yujie, Kang Zhao, Mengjie Hao, Jing Xia, Xiaoyan Guan, and Fanghua Liu. "An Analysis of the Morphology Evolution of YG8 Cemented Carbide by Laser Ablation in the Liquid Phase." Coatings 13, no. 12 (December 9, 2023): 2061. http://dx.doi.org/10.3390/coatings13122061.

Full text
Abstract:
To explore the influence of the number of laser ablations on the shape, geometry, and taper of the pitting structure by laser ablation in the liquid phase, three-dimensional confocal microscopy was used to quantitatively characterize the shape of the surface dotting texture of YG8 cemented carbide and analyze the evolution of the morphology based on the liquid-assisted laser ablation test. The results show that the surface pitting structure of YG8 cemented carbide evolves from a micro-convexity to a crater with the increase in the number of laser ablations, and the bottom of the crater produces a convexity after 7 ablations, the shape of the crater evolves to a trapezoidal shape after 13 ablations, and the shape is stable. The size of the dot texture increases with the number of laser ablations and reaches a maximum value of 396 μm in diameter and 149 μm in depth at the 10th and 12th ablations, respectively. The taper of the dot texture showed a trend of decreasing, increasing, and then decreasing with the increase in the number of laser ablations, and the taper was stable with more than seven ablations. This study lays a theoretical foundation for the control of the dot texture morphology on the surface of YG8 cemented carbide by laser ablation in a liquid-phase environment.
APA, Harvard, Vancouver, ISO, and other styles
5

SANZ, J., R. BETTI, and V. N. GONCHAROV. "Rayleigh–Taylor instability analysis of targets with a low-density ablation layer." Laser and Particle Beams 17, no. 2 (April 1999): 237–44. http://dx.doi.org/10.1017/s0263034699172094.

Full text
Abstract:
Irregularities on the outer surface of Inertial Confinement Fusion (ICF) capsules accelerated by laser irradiation are amplified by the Rayleigh–Taylor instability (RTI), which occurs at the ablation front (ablative RTI), where density gradient and acceleration have the same direction. The analytic stability theory of subsonic ablation fronts, for Froude number larger than one, shows that the main stabilization mechanisms are blowoff convection (rocket effect equilibrating the gravity force) and ablation (Sanz 1994; Betti et al. 1996). Blowoff convection and ablation are enhanced if the ablator material is mixed with high-Z dopants. The latest enhances radiation emission setting the ablator on a higher adiabat, lowering its density, and increasing the ablation velocity. When such an ablator is used to push a solid deuterium-tritium (D–T) shell, the D–T-ablator interface becomes classically unstable. The aim of this paper is to investigate the stability of such a configuration, represented by a low-density ablator pushing a heavier shell, and study the interplay between the classical and ablative RTIs occurring simultaneously. The stability analysis is carried out using a sharp boundary model (Piriz et al. 1997), which contains all the basic physics of the RTI in ICF.
APA, Harvard, Vancouver, ISO, and other styles
6

Zajner, Chris, Jonathon Lau, Faical Isbaine, Nealen Laxpati, and Robert E. Gross. "1130 Anatomical Features Predicting Outcome From Stereotactic Laser Amygdalohippocampotomy." Neurosurgery 70, Supplement_1 (April 2024): 187. http://dx.doi.org/10.1227/neu.0000000000002809_1130.

Full text
Abstract:
INTRODUCTION: Stereotactic laser amygdalohippocampotomy (SLAH) is a novel procedure which is effective and safe for the treatment of temporal lobe epilepsy. Optimal operative ablation location and extent, however, is uncertain, as are the neuroanatomical features guiding successful ablations. METHODS: Patients treated with SLAH for MTS at Emory University between 2011 and 2019 (n = 65) were considered in this retrospective study. Post-procedure T1 MRI scans of patients were used to create manual segmentations of the ablation region of each patient. Ablations were assessed in relation to 1) whether they crossed the coronal plane of the lateral mesencephalic sulcus (LMS), 2) the extent to which the ablation extended posterior to the LMS, and 3) extent of ablation of the uncus. Wilcoxon ranked-sign test was performed for each variable between groups of patients with Engel score 1 versus Engel score 2-4. RESULTS: Distance of ablation past the LMS was not different between Engel class 1 (mean 6.32 ± 4.16 mm), and Engel class 2-4 (7.93 ± 3.75 mm) (p = 0.099). Ratio of ablations extending posterior to the LMS was 0.82 (SD = 0.39) in Engel 1, and 0.90 (SD = 0.30) in Engel 2-4 (p = 0.370). Volume of ablation showed little correlation with outcome, with average ablation of Engel 1 = 6064 ± 2128 mm3, Engel 2-4 = 5828 ± 3031 mm3, and no significant difference with Wilcoxon ranked-sign test (p = 0.239). Ablation of the uncus showed a strong association with better surgical outcome, with ratio of uncus ablation for Engel 1 at 0.71(SD = 0.31), and Engel 2-4 at 0.37 (SD = 0.36); p < 0.001). CONCLUSIONS: Larger ablation alone was not associated with better surgical outcomes. Ablation of the uncus was shown to result in better outcomes. Contrary to current practice, extension of SLAH ablation posterior to the lateral mesencephalic sulcus did not demonstrate improved post-operative outcomes.
APA, Harvard, Vancouver, ISO, and other styles
7

Kansaku, Rei, Naoki Sakakibara, Atsushi Amano, Hisako Endo, Takashi Shimabukuro, and Michiaki Sueishi. "Histological difference between pulsed wave laser and continuous wave laser in endovenous laser ablation." Phlebology: The Journal of Venous Disease 30, no. 6 (May 30, 2014): 429–34. http://dx.doi.org/10.1177/0268355514538248.

Full text
Abstract:
Background Endovenous laser ablation to saphenous veins has been popular as a minimally invasive treatment for chronic venous insufficiency. However, adverse effects after endovenous laser ablation using continuous wave laser still remain. Pulsed wave with enough short pulse duration and sufficiently long thermal relaxation time may avoid the excess energy delivery, which leads to the perforation of the vein wall. Method (1) Free radiation: Laser is radiated in blood for 10 s. (2) Endovenous laser ablation: Veins were filled with blood and placed in saline. Endovenous laser ablations were performed. Results (1) There were clots on the fiber tips with continuous wave laser while no clots with pulsed wave laser. (2) In 980-nm continuous wave, four of 15 specimens had ulcers and 11 of 15 had perforation. In 1470-nm continuous wave with 120 J/cm of linear endovenous energy density, two of three presented ulcers and one of three showed perforation. In 1470-nm continuous wave with 60 J/cm of linear endovenous energy density, two of four had ulcers and two of four had perforation. In 1320-nm pulsed wave, there were neither ulcers nor perforation in the specimens. Conclusions While endovenous laser ablation using continuous wave results in perforation in many cases, pulsed wave does not lead to perforation.
APA, Harvard, Vancouver, ISO, and other styles
8

John, Samuel, Yan Yan, Shirin Abbasi, and Mohammad Mehrmohammadi. "Ultrasound and Photoacoustic Imaging for the Guidance of Laser Ablation Procedures." Sensors 24, no. 11 (May 30, 2024): 3542. http://dx.doi.org/10.3390/s24113542.

Full text
Abstract:
The accuracy and efficacy of laser ablation procedures depend on the accurate placement of the laser applicator within the diseased tissue, monitoring the real-time temperature during the ablation procedure, and mapping the extent of the ablated region. Ultrasound (US) imaging has been widely used to guide ablation procedures. While US imaging offers significant advantages for guiding ablation procedures, its limitations include low imaging contrast, angular dependency, and limited ability to monitor the temperature. Photoacoustic (PA) imaging is a relatively new imaging modality that inherits the advantages of US imaging and offers enhanced capabilities for laser-guided ablations, such as accurate, angle-independent tracking of ablation catheters, the potential for quantitative thermometry, and monitoring thermal lesion formation. This work provides an overview of ultrasound-guided procedures and how different US-related artifacts limit their utility, followed by introducing PA as complementary to US as a solution to address the existing limitations and improve ablation outcomes. Furthermore, we highlight the integration of PA-driven features into existing US-guided laser ablation systems, along with their limitations and future outlooks. Integrated US/PA-guided laser ablation procedures can lead to safer and more precise treatment outcomes.
APA, Harvard, Vancouver, ISO, and other styles
9

Liang, Allison, Sean Munier, and Shabbar Danish. "NIMG-68. MATHEMATICAL MODELING OF THERMAL DAMAGE ESTIMATE VOLUMES IN MAGNETIC RESONANCE-GUIDED LASER INTERSTITIAL THERMAL THERAPY." Neuro-Oncology 22, Supplement_2 (November 2020): ii163. http://dx.doi.org/10.1093/neuonc/noaa215.681.

Full text
Abstract:
Abstract BACKGROUND Magnetic resonance-guided laser interstitial thermal therapy is a minimally invasive procedure that produces real-time thermal damage estimates of ablation (TDE). Orthogonal TDE-MRI slices provides an opportunity to mathematically estimate ablation volume. OBJECTIVE To mathematically model TDE volumes and validate with post-24 hours MRI ablation volumes. METHODS Ablations were performed with the Visualase Laser Ablation System (Medtronic). Using ellipsoidal parameters determined for dual-TDEs from orthogonal MRI planes, TDE volumes were calculated by two definite integral methods (A and B) implemented in Matlab (MathWorks). Post 24-hours MRI ablative volumes were measured in OsiriX (Pixmeo) by two-blinded raters and compared to TDE volumes via paired t-tests and Pearson’s correlations. RESULTS Twenty-two ablations for 20 patients with various intracranial pathologies were included. Average TDE volumes calculated with Method A was 3.44 ± 1.96 cm3 and with Method B was 4.83 ± 1.53 cm3. Method A TDE volumes were significantly different than post-24 hours volumes (P &lt; 0.001). Method B TDE volumes were not significantly different than post-24 hours volumes (P = 0.39) and strongly correlated with each other (r = 0.85, R2 = 0.72, P &lt; 0.0001). A total of 8/22 (36%) method A versus 17/22 (77%) method B TDE volumes were within 25% of the post 24-hours ablative volume. CONCLUSION We present the first iteration of a viable mathematical method that integrates dual-plane TDEs to calculate volumes resembling 24 hours post-operative volumes. Future iterations of our algorithm will need to determine additional calculated variables that improve the performance of volumetric calculations.
APA, Harvard, Vancouver, ISO, and other styles
10

Zajner, C., A. Taha, M. Abbass, F. Isbaine, N. Laxpati, R. Gross, and J. Lau. "P.079 Relationships between anatomical features and outcome after stereotactic laser amygdalohippocampotomy." Canadian Journal of Neurological Sciences / Journal Canadien des Sciences Neurologiques 51, s1 (May 24, 2024): S38. http://dx.doi.org/10.1017/cjn.2024.185.

Full text
Abstract:
Background: Stereotactic laser amygdalohippocampotomy (SLAH) has recently been shown to be comparable to traditional temporal lobectomy procedures. The ideal extent and volume of laser ablations remains an area of investigation Methods: 65 patients treated with SLAH for MTS were considered in this retrospective study. Manual segmentations of ablations were created using post-procedure T1-MRI scans. Ablations were assessed in relation to whether they crossed the coronal plane of the superior lateral mesencephalic sulcus (LMS), the extent to which ablation crossed this landmark, and extent of ablation of the uncus. Analysis of was done with binary categorization of 12-month Engel classification score. Results: Distance of ablation posterior to the coronal plane of the LMS was not associated with better surgical outcome (Engel class 1: 6.32 ± 4.16 mm; Engel class 2-4: 7.93 ± 3.75mm; (p = 0.099)). Ratio of ablations extending posterior to the LMS was 0.82 (SD = .39) in Engel 1 patients, and 0.90 (SD = 0.3) in Engel 2-4 patients; (p = 0.370). Volume of ablation showed little correlation with outcome (Engel class 1: 6064 ± 2128 mm3; Engel class 2-4: 5828 ± 3031 mm3; (p=0.239)). Ablation of the uncus showed a strong association with better surgical outcome (Engel class 1: 0.71(SD = 0.31); Engel 2-4: 0.37 (SD = 0.36); p <0.001). Conclusions: Contrary to current practice, extension of ablation posterior to the LMS did not demonstrate improved outcome.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Laser ablation"

1

Kapitan, Daniel. "Laser ablation with copper vapour lasers." Thesis, University of Oxford, 1999. https://ora.ox.ac.uk/objects/uuid:a1dc1a3b-602a-4ebb-abe2-734e8e11f15a.

Full text
Abstract:
The use of copper vapour lasers for laser ablation in laser materials processing applications is studied. To this purpose, the generation of near diffraction-limited beam quality output from a single medium-scale oscillator is demonstrated via matching the total buffer gas pressure to the specific electrical input power loading and the degree of insulation of the plasma tube. The design and characterisation of a Master-Oscillator Power-Amplifier system based on a smallbore oscillator is also described, focusing on pulse stretching techniques to provide efficient seeding required for producing 20-50 W high beam-quality output for laser materials processing purposes. Various experimental studies on the fundamental processes of laser ablation of metals are presented. The effect of the background gas properties on shock-wave formation in laser generated plasmas is studied using a ballistic pendulum. The experimental findings are found to be accurately described by a modified Sedov-Taylor-Von Neumann theory which accounts for the effect of the piston-mass. The theory is applied to characterise the fluorination process in the shock-wave, in view of oxygen isotope analysis in geochemistry. Atomic emission spectroscopy is shown to provide some measure of the electron temperature and electron density at the plasma core. The experimental results are discussed in view of existing models to describe the extreme Stark-broadening and self-absorption in dense, cool plasmas. A comparative study of the use of femtosecond and nanosecond pulsed lasers for laser ablation of metals is presented to assess the relative importance of thermal diffusion. Measurement of the recoil momentum due to ejection of molten particulates during ablation in vacuum provides insight into the effect of material properties. Diffusion-limited surface texturing of metals via direct transfer of an optical interference patterns is demonstrated.
APA, Harvard, Vancouver, ISO, and other styles
2

Chan, Kin Foong. "Pulsed infrared laser ablation and clinical applications /." Digital version:, 2000. http://wwwlib.umi.com/cr/utexas/fullcit?p9992765.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Jansen, Andrew. "Laser ablation ICP spectrometry." Thesis, Sheffield Hallam University, 1998. http://shura.shu.ac.uk/19868/.

Full text
Abstract:
This thesis reports investigations into laser ablation inductively coupled plasma emission spectrometry for rapid elemental analysis of a diverse range of samples: glasses, aqueous solutions, oils, coated steels and glasses, and biological samples. Bulk analysis of glasses for major, minor and trace elements is reported. Results showed that element emission responses are dependent upon laser operating conditions. With optimised operating conditions of a Q switched laser operating at 60 J for 5 s ablation time with the laser defocused by 5 mm above the sample surface. The limits of detection are in the sub ug g -1 level with precision ranging from 6.6 %RSD for a non volatile element such as boron to 23 %RSD for a volatile element silver. Although the principal aim of using aqueous multielement solutions as novel calibration standards for quantitative analysis of other liquids was not achieved, optimised laser operating parameters needed for microsampling of aqueous solutions and analytical performance data were obtained. The optimum laser operating conditions for a 20 ul sample were found to be the same as for glasses and were as follows: a Q switched laser operating at 60 J for a 5 s ablation time with the laser defocused by 5 mm above the sample surface. Transport efficiencies of approximately 30 % can be achieved, compared to < 1% by pneumatic nebulisation. Also there was no differential loss of elements by laser ablation which may occur with electrothermal vaporisation. Limits of detection were found to be in the sub ug ml -1 level. Precisions were typically between 6.6 and 12 %RSD. The main cause for lack of precision was spattering of the sample. Microsampling of oils by laser ablation proved to be an effective and accurate technique for rapid determination of element concentration without the need for sample filtration or digestion. Precision proved to be better than for aqueous solutions, typically from 3 to 7 %RSD, because of a reduction in spattering. The same optimum laser operating conditions used for aqueous solutions were identical for oils. This thesis reports the first experiments to fully utilise laser ablation as a routine method for quantitative measurement of coating depth for coated steels and glasses. It was found that the peak width at half the maximum height was proportional to the coating thickness (over a range of 1 to 10 um). With optimised laser operating conditions a depth resolution of less than 1 um was achieved. The optimum laser operating conditions were as follows: a Q switched laser ran continuously with a laser lamp energy of 60 J at 10 Hz pulse repetition rate. Finally experiments show the great potential for the use of laser ablation as a microsampling technique for microtome tissue samples. Micro depth analysis of nickel distribution in skin shows that the technique could differentiate between two skin samples with different nickel concentrations. The use of gel multielement standards as a novel calibration technique for analysis of microtome tissue samples has also been demonstrated. Optimum laser operating condition were to use a moderate laser energy of 750 V with the laser defocused 5 mm above the sample surface.
APA, Harvard, Vancouver, ISO, and other styles
4

Lippert, Thomas. "Photopolymers designed for laser ablation ablation mechanisms and applications /." Zürich : ETH, Eidgenössische Technische Hochschule Zürich, Paul Scherrer Institut, Materials Development and Characterization Group, 2002. http://e-collection.ethbib.ethz.ch/show?type=habil&nr=8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Pinho, George Paul. "UV laser ablation of metals." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1999. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape9/PQDD_0016/NQ38265.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Robert, Stewart. "Laser ablation within enclosed surfaces." Thesis, University of Manchester, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.690045.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Terragni, Jacopo. "Laser Ablation for Space Applications." Doctoral thesis, Università degli studi di Trento, 2022. https://hdl.handle.net/11572/339556.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Musaev, Omar Wróbel Jerzy. "UV laser assisted processing of InP at different ambient conditions with variable number of pulses and fluences." Diss., UMK access, 2006.

Find full text
Abstract:
Thesis (Ph. D.)--Dept. of Physics and School of Computing and Engineering. University of Missouri--Kansas City, 2006.
"A dissertation in physics and telecommunications networking." Advisor: Jerzy Wrobel. Typescript. Vita. Title from "catalog record" of the print edition Description based on contents viewed Nov. 1, 2007. Includes bibliographical references (leaves 185-190). Online version of the print edition.
APA, Harvard, Vancouver, ISO, and other styles
9

Crossland, J. D. "Computer modelling of laser-plasma ablation." Thesis, University of Hull, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.384648.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Smyth, Catherine. "YBCO thin films by laser ablation." Thesis, Queen's University Belfast, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.239224.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Laser ablation"

1

Miller, John C., ed. Laser Ablation. Berlin, Heidelberg: Springer Berlin Heidelberg, 1994. http://dx.doi.org/10.1007/978-3-642-78720-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Phipps, Claude R. Laser ablation and its applications. New York: Springer, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Black, Sharon E. Laser ablation: Effects and applications. Hauppauge, N.Y: Nova Science Publishers, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Pacella, Claudio Maurizio, Tian'an Jiang, and Giovanni Mauri, eds. Image-guided Laser Ablation. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-21748-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

1949-, Miller J. C., and Haglund R. F. 1942-, eds. Laser ablation and desorption. San Diego: Academic Press, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Stafe, Mihai, Aurelian Marcu, and Niculae N. Puscas. Pulsed Laser Ablation of Solids. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-40978-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Miller, John C., and Richard F. Haglund, eds. Laser Ablation Mechanisms and Applications. New York, NY: Springer New York, 1991. http://dx.doi.org/10.1007/bfb0048346.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Phipps, Claude, ed. Laser Ablation and its Applications. Boston, MA: Springer US, 2007. http://dx.doi.org/10.1007/978-0-387-30453-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

1949-, Miller J. C., ed. Laser ablation: Principles and applications. Berlin: Springer Verlag, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

T, Azar Dimitri, Camellin Massimo, and Yee Richard W, eds. LASEK, PRK, and excimer laser stromal surface ablation. New York: Marcel Dekker, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Laser ablation"

1

Penno, Ellen E. Anderson. "Laser Ablation." In Surface Ablation, 77–88. Boca Raton: CRC Press, 2024. http://dx.doi.org/10.1201/9781003526643-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Miller, J. C. "History, Scope, and the Future of Laser Ablation." In Laser Ablation, 1–10. Berlin, Heidelberg: Springer Berlin Heidelberg, 1994. http://dx.doi.org/10.1007/978-3-642-78720-1_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Haglund, R. F., and N. Itoh. "Electronic Processes in Laser Ablation of Semiconductors and Insulators." In Laser Ablation, 11–52. Berlin, Heidelberg: Springer Berlin Heidelberg, 1994. http://dx.doi.org/10.1007/978-3-642-78720-1_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Chase, L. L. "Laser Ablation and Optical Surface Damage." In Laser Ablation, 53–84. Berlin, Heidelberg: Springer Berlin Heidelberg, 1994. http://dx.doi.org/10.1007/978-3-642-78720-1_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Venkatesan, T. V. "Pulsed-Laser Deposition of High-Temperature Superconducting Thin Films." In Laser Ablation, 85–106. Berlin, Heidelberg: Springer Berlin Heidelberg, 1994. http://dx.doi.org/10.1007/978-3-642-78720-1_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Srinivasan, R. "Interaction of Laser Radiation with Organic Polymers." In Laser Ablation, 107–33. Berlin, Heidelberg: Springer Berlin Heidelberg, 1994. http://dx.doi.org/10.1007/978-3-642-78720-1_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Hettich, R. L., and C. Jin. "Laser Ablation and Laser Desorption Techniques with Fourier-Transform Mass Spectrometry (FTMS)." In Laser Ablation, 135–55. Berlin, Heidelberg: Springer Berlin Heidelberg, 1994. http://dx.doi.org/10.1007/978-3-642-78720-1_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Sappey, A. D., and N. S. Nogar. "Diagnostic Studies of Laser Ablation for Chemical Analysis." In Laser Ablation, 157–83. Berlin, Heidelberg: Springer Berlin Heidelberg, 1994. http://dx.doi.org/10.1007/978-3-642-78720-1_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

"EUROPEAN MATERIALS RESEARCH SOCIETY SYMPOSIA PROCEEDINGS." In Laser Ablation, iv. Elsevier, 1996. http://dx.doi.org/10.1016/b978-0-444-82412-7.50001-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

"Front Matter." In Laser Ablation, v. Elsevier, 1996. http://dx.doi.org/10.1016/b978-0-444-82412-7.50002-x.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Laser ablation"

1

Walsh, Joseph T., George J. Hruza, Thomas J. Flotte, R. Rox Anderson, and Thomas F. Deutsch. "Infrared laser ablation of tissue." In OSA Annual Meeting. Washington, D.C.: Optica Publishing Group, 1987. http://dx.doi.org/10.1364/oam.1987.thq2.

Full text
Abstract:
Precise removal of soft tissues and bone is often necessary in surgery. Clinical cw CO2 lasers are ineffective in cutting bone, yet efficiently ablate soft tissue. However, there is typically a 300–1000-jum zone of thermal damage left at the cut edge which impedes healing. A simple model predicts that short pulses of strongly absorbed laser radiation should efficiently ablate tissue and minimize residual damage. Studies were performed on guinea pig skin with pulsed CO2 lasers (λ = 10.6 μm), the residual damage could be minimized to 50 μm when the pulse duration was less than the calculated thermal relaxation time for a layer one optical absorption length thick. At the peak of the water absorption curve, 2.9 μm, tissue absorbs 10 times more strongly than at 10.6 μm, and even less residual damage is possible; 100-ns Q-switched Er:YAG laser pulses (λ = 2.9 μm) ablated both soft tissues and bone; the zone of thermal damage was 5-10 μm. To compare healing, lesions were created in epilated guinea pig skin with Er:YAG and CO2 lasers and a scalpel. Er:YAG laser wounds and scalpel wounds healed quickly and with the same minimal scarring, CO2 laser wounds healed slowly with more scarring.
APA, Harvard, Vancouver, ISO, and other styles
2

Luk'yanchuk, Boris S., Nikita M. Bityurin, Aleksey Y. Malyshev, Sergei I. Anisimov, N. D. Arnold, and D. Baeuerle. "Photophysical ablation." In High-Power Laser Ablation, edited by Claude R. Phipps. SPIE, 1998. http://dx.doi.org/10.1117/12.321601.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Oliveira, Victor, Rui M. Vilar, and O. Conde. "Laser ablation of Al2O3-TiC ceramics: influence of laser fluence." In High-Power Laser Ablation, edited by Claude R. Phipps. SPIE, 1998. http://dx.doi.org/10.1117/12.321582.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Ashkenasi, David, Gerril Herbst, Arkadi Rosenfeld, H. Varel, Michael Lorenz, Razvan Stoian, and Eleanor E. B. Campbell. "Laser ablation and structuring of transparent materials with ultrashort laser pulses." In High-Power Laser Ablation, edited by Claude R. Phipps. SPIE, 1998. http://dx.doi.org/10.1117/12.321575.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Husmann, Andreas, Markus Niessen, Frank Gruembel, Ernst-Wolfgang Kreutz, and Reinhart Poprawe. "Scaling of a Q-switch CO2 laser for pulsed laser deposition." In High-Power Laser Ablation, edited by Claude R. Phipps. SPIE, 1998. http://dx.doi.org/10.1117/12.321599.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Obara, Minoru, Kyoichi Adachi, Tetsu Hasegawa, Akihiko Machida, Sachiyo Fukaya, Hiroshi Kumagai, and Katsumi Midorikawa. "Planar laser and nonlinear optical waveguides fabricated by pulsed laser deposition." In High-Power Laser Ablation, edited by Claude R. Phipps. SPIE, 1998. http://dx.doi.org/10.1117/12.321606.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Tsunemi, Akira, Akira Endo, and Daiji Ichishima. "Paint removal from aluminum and composite substrate of aircraft by laser ablation using TEA CO2 lasers." In High-Power Laser Ablation, edited by Claude R. Phipps. SPIE, 1998. http://dx.doi.org/10.1117/12.321539.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Branly, Stephane, and Bruno Godard. "Excimer laser shock hardening." In High-Power Laser Ablation, edited by Claude R. Phipps. SPIE, 1998. http://dx.doi.org/10.1117/12.321536.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Albrecht, George F., Steven B. Sutton, E. V. George, Walter R. Sooy, and William F. Krupke. "Heat capacity disk laser." In High-Power Laser Ablation, edited by Claude R. Phipps. SPIE, 1998. http://dx.doi.org/10.1117/12.321589.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Bullock, Anthony B., and Paul R. Bolton. "Laser-induced back-ablation of aluminum thin films using picosecond laser pulses." In High-Power Laser Ablation, edited by Claude R. Phipps. SPIE, 1998. http://dx.doi.org/10.1117/12.321549.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Laser ablation"

1

Zeng, Xianzhong, Xianglei Mao, Ralph Greif, and Richard E. Russo. Ultraviolet femtosecond and nanosecond laser ablation of silicon: Ablation efficiency and laser-induced plasma expansion. Office of Scientific and Technical Information (OSTI), March 2004. http://dx.doi.org/10.2172/836676.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Garrison, Barbara J., and Leonid V. Zhigilei. Modeling of Free Electron Laser Ablation. Fort Belvoir, VA: Defense Technical Information Center, October 2002. http://dx.doi.org/10.21236/ada407589.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Garrison, Barbara J., and Leonid V. Zhigilei. Modeling of Free Electron Laser Ablation II. Fort Belvoir, VA: Defense Technical Information Center, August 2003. http://dx.doi.org/10.21236/ada426304.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Chen, Winston C. H. Innovative Laser Ablation Technology for Surface Decontamination. Office of Scientific and Technical Information (OSTI), June 2002. http://dx.doi.org/10.2172/835397.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Chen, Winston C. H. Innovative Laser Ablation Technology for Surface Decontamination. Office of Scientific and Technical Information (OSTI), June 2003. http://dx.doi.org/10.2172/835399.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Cheng, Chung H. Novel Laser Ablation Technology for Surface Decontamination. Office of Scientific and Technical Information (OSTI), June 2004. http://dx.doi.org/10.2172/839149.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Qian, Ying, Zheng Li, Chunyun Fan, and Yong Huang. Comparison of ultrasound-guided microwave ablation, laser ablation, and radiofrequency ablation in treating benign thyroid nodules: A meta-analysis. INPLASY - International Platform of Registered Systematic Review and Meta-analysis Protocols, January 2024. http://dx.doi.org/10.37766/inplasy2024.1.0025.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Curreli, Davide. Investigation of uranium molecular species using laser ablation. Office of Scientific and Technical Information (OSTI), July 2017. http://dx.doi.org/10.2172/1377768.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Liu, C. L., J. N. Leboeuf, R. F. Wood, D. B. Geohegan, J. M. Donato, K. R. Chen, and A. A. Puretzky. Vapor breakdown during ablation by nanosecond laser pulses. Office of Scientific and Technical Information (OSTI), April 1995. http://dx.doi.org/10.2172/102182.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

BULLOCK, A. Laser-induced back-ablation of aluminum thin films using picosecond laser pulses. Office of Scientific and Technical Information (OSTI), May 1999. http://dx.doi.org/10.2172/15006367.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Laser ablation' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography