Academic literature on the topic 'Kinetic Design'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Kinetic Design.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Kinetic Design"
Gill, Laurence W., and Orlaith A. McLoughlin. "Solar Disinfection Kinetic Design Parameters for Continuous Flow Reactors." Journal of Solar Energy Engineering 129, no. 1 (November 15, 2005): 111–18. http://dx.doi.org/10.1115/1.2391316.
Full textSaes, M., M. I. Mohamed Refai, B. J. F. van Beijnum, J. B. J. Bussmann, E. P. Jansma, P. H. Veltink, J. H. Buurke, et al. "Quantifying Quality of Reaching Movements Longitudinally Post-Stroke: A Systematic Review." Neurorehabilitation and Neural Repair 36, no. 3 (January 31, 2022): 183–207. http://dx.doi.org/10.1177/15459683211062890.
Full textBineli, Aulus, Jules Thibault, André Jardini, and Rubens Maciel Filho. "Ethanol Steam Reforming for Hydrogen Production in Microchannel Reactors: Experimental Design and Optimization." International Journal of Chemical Reactor Engineering 11, no. 1 (June 18, 2013): 9–17. http://dx.doi.org/10.1515/ijcre-2012-0002.
Full textRomero-Franco, Natalia, María del Carmen Ortego-Mate, and Jesús Molina-Mula. "Knee Kinematics During Landing: Is It Really a Predictor of Acute Noncontact Knee Injuries in Athletes? A Systematic Review and Meta-analysis." Orthopaedic Journal of Sports Medicine 8, no. 12 (December 1, 2020): 232596712096695. http://dx.doi.org/10.1177/2325967120966952.
Full textBetancourt, Michael. "Asemic typography in kinetic design." Semiotica 2019, no. 231 (November 26, 2019): 245–57. http://dx.doi.org/10.1515/sem-2018-0029.
Full textCardona, Manuel, Cecilia E. García Cena, Fernando Serrano, and Roque Saltaren. "ALICE: Conceptual Development of a Lower Limb Exoskeleton Robot Driven by an On-Board Musculoskeletal Simulator." Sensors 20, no. 3 (January 31, 2020): 789. http://dx.doi.org/10.3390/s20030789.
Full textSzpak, Joseph P., Donald R. Woods, and Kyle Bouchard. "Critique of Jar Testing for the Design of Coagulation-Flocculation Systems." Water Quality Research Journal 31, no. 1 (February 1, 1996): 51–64. http://dx.doi.org/10.2166/wqrj.1996.004.
Full textHuang, Yuanzhi, Steven G. Gilmour, Kalliopi Mylona, and Peter Goos. "Optimal Design of Experiments for Hybrid Nonlinear Models, with Applications to Extended Michaelis–Menten Kinetics." Journal of Agricultural, Biological and Environmental Statistics 25, no. 4 (July 15, 2020): 601–16. http://dx.doi.org/10.1007/s13253-020-00405-3.
Full textLee, Ming-Yih, A. G. Erdman, and Y. Gutman. "Development of Kinematic/Kinetic Performance Tools in Synthesis of Multi-DOF Mechanisms." Journal of Mechanical Design 115, no. 3 (September 1, 1993): 462–71. http://dx.doi.org/10.1115/1.2919213.
Full textAmorós, José Luis. "Towards Rational Design of Porcelain Tile Glazes." Advances in Science and Technology 92 (October 2014): 138–47. http://dx.doi.org/10.4028/www.scientific.net/ast.92.138.
Full textDissertations / Theses on the topic "Kinetic Design"
Wenning, Matthew R. "Kinematic and kinetic differences in the barbell squat wearing two different types of shoes." Virtual Press, 2005. http://liblink.bsu.edu/uhtbin/catkey/1328122.
Full textSchool of Physical Education, Sport, and Exercise Science
Po-Yi, Wu. "Affective and kinetic design in Brahms' duo sonatas." Thesis, King's College London (University of London), 2006. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.431173.
Full textHuan, Xun. "Accelerated Bayesian experimental design for chemical kinetic models." Thesis, Massachusetts Institute of Technology, 2010. http://hdl.handle.net/1721.1/59678.
Full textCataloged from PDF version of thesis.
Includes bibliographical references (p. 129-136).
The optimal selection of experimental conditions is essential in maximizing the value of data for inference and prediction, particularly in situations where experiments are time-consuming and expensive to conduct. A general Bayesian framework for optimal experimental design with nonlinear simulation-based models is proposed. The formulation accounts for uncertainty in model parameters, observables, and experimental conditions. Straightforward Monte Carlo evaluation of the objective function - which reflects expected information gain (Kullback-Leibler divergence) from prior to posterior - is intractable when the likelihood is computationally intensive. Instead, polynomial chaos expansions are introduced to capture the dependence of observables on model parameters and on design conditions. Under suitable regularity conditions, these expansions converge exponentially fast. Since both the parameter space and the design space can be high-dimensional, dimension-adaptive sparse quadrature is used to construct the polynomial expansions. Stochastic optimization methods will be used in the future to maximize the expected utility. While this approach is broadly applicable, it is demonstrated on a chemical kinetic system with strong nonlinearities. In particular, the Arrhenius rate parameters in a combustion reaction mechanism are estimated from observations of autoignition. Results show multiple order-of-magnitude speedups in both experimental design and parameter inference.
by Xun Huan.
S.M.
Parkes, Amanda Jane. "Topobo : a gestural design tool with kinetic memory." Thesis, Massachusetts Institute of Technology, 2004. http://hdl.handle.net/1721.1/28768.
Full textThesis (S.M.)--Massachusetts Institute of Technology, School of Architecture and Planning, Program in Media Arts and Sciences, 2004.
The modeling of kinetic systems, both in physical materials and virtual simulations, provides a methodology to better understand and explore the forces and dynamics of our physical environment. The need to experiment, prototype and model with programmable kinetic forms is becoming increasingly important as digital technology becomes more readily embedded in physical structures and provides real-time variable data the capacity to transform the structures themselves. This thesis introduces Topobo, a gestural design tool embedded with kinetic memory--the ability to record, playback, and transform physical motion in three dimensional space. As a set of kinetic building blocks, Topobo records and repeats the body's gesture while the system's peer-to-peer networking scheme provides the capability to pass and transform q gesture. This creates a means to represent and understand algorithmic simulations in a physical material, providing a physical demonstration of how a simple set of rules can lead to complex form and behavior. Topobo takes advantage of the editability of computer data combined with the physical immediacy of a tangible model to provide a means for expression and investigation of kinetic patterns and processes not possible with existing materials.
Amanda J. Parkes.
S.M.
Abraham, Thomas Kannankara. "Kinetic bounds on attainability in the reactor synthesis problem." Connect to resource, 2005. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1126791863.
Full textTitle from first page of PDF file. Document formatted into pages; contains xvi, 190 p.; also includes graphics (some col.). Includes bibliographical references (p. 182-190). Available online via OhioLINK's ETD Center
Zhou, Mingxia. "First-principles based micro-kinetic modeling for catalysts design." Diss., Kansas State University, 2018. http://hdl.handle.net/2097/38608.
Full textDepartment of Chemical Engineering
Bin Liu
Efficient and selective catalysis lies at the heart of many chemical reactions, enabling the synthesis of chemicals and fuels with enormous societal and technological impact. A fundamental understanding of intrinsic catalyst properties for effective manipulation of the reactivity and selectivity of industrial catalysts is essential to select proper catalysts to catalyze the reactions we want and hinder the reactions we do not want. The progress in density functional theory (DFT) makes it possible to describe interfacial catalytic reactions and predict catalytic activities from one catalyst to another. In this study, water-gas shift reaction (WGSR) was used as a model reaction. First-principles based micro-kinetic modeling has been performed to deeply understand interactions between competing reaction mechanisms, and the relationship with various factors such as catalyst materials, structures, promoters, and interactions between intermediates (e.g., CO self-interaction) that govern the observed catalytic behaviors. Overall, in this thesis, all relevant reaction mechanisms in the model reaction on well-defined active sites were developed with first-principles calculations. With the established mechanism, the promotional effect of K adatom on Ni(111) on WGSR compared to the competing methanation was understood. Moreover, the WGSR kinetic trend, with the hydrogen production rate decreasing with increasing Ni particle diameters (due to the decreasing fractions of low-coordinated surface Ni site), was reproduced conveniently from micro-kinetic modeling techniques. Empirical correlations such as Brønsted-Evans-Polanyi (BEP) relationship for O-H, and C-O bond formation or cleavage on Ni(111), Ni(100), and Ni(211) were incorporated to accelerate computational analysis and generate trends on other transition metals (e.g., Cu, Au, Pt). To improve the numerical quality of micro-kinetic modeling, later interactions of main surface reaction intermediates were proven to be critical and incorporated successfully into the kinetic models. Finally, evidence of support playing a role in the enhancement of catalyst activity and the impact on future modeling will be discussed. DFT will be a powerful tool for understanding and even predicting catalyst performance and is shaping our approach to catalysis research. Such molecular-level information obtained from computational methods will undoubtedly guide the design of new catalyst materials with high precision.
Gooch, S. D. "Design and mathematical modelling of the kinetic sculpture Blade." Thesis, University of Canterbury. Mechanical Engineering, 2001. http://hdl.handle.net/10092/7844.
Full textColes, Thomas Michael Kyte. "Model simplification of chemical kinetic systems under uncertainty." Thesis, Massachusetts Institute of Technology, 2011. http://hdl.handle.net/1721.1/65183.
Full textThis electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.
Cataloged from student submitted PDF version of thesis.
Includes bibliographical references (p. 103-108).
This thesis investigates the impact of uncertainty on the reduction and simplification of chemical kinetics mechanisms. Chemical kinetics simulations of complex fuels are very computationally expensive, especially when combined with transport, and so reduction or simplification must be used to make them more tractable. Existing approaches have been in an entirely deterministic setting, even though reaction rate parameters are generally highly uncertain. In this work, potential objectives under uncertainty are defined and then a number of studies are made in the hope of informing the development of a new uncertainty-aware simplification scheme. Modifications to an existing deterministic algorithm are made as a first step towards an appropriate new scheme.
by Thomas Michael Kyte Coles.
S.M.
Fox, Justin M. 1981. "Fully-kinetic PIC simulations for Hall-effect thrusters." Thesis, Massachusetts Institute of Technology, 2007. http://hdl.handle.net/1721.1/41733.
Full textIncludes bibliographical references (p. 173-177).
In recent years, many groups have numerically modeled the near-anode region of a Hall thruster in attempts to better understand the associated physics of thruster operation. Originally, simulations assumed a continuum approximation for electrons and used magnetohydrodynamic fluid equations to model the significant processes. While these codes were computationally efficient, their applicability to non-equilibrated regions of the thruster, such as wall sheaths, was limited, and their accuracy was predicated upon the notion that the energy distributions of the various species remained Maxwellian at all times. The next generation of simulations used the fully-kinetic particle-in-cell (PIC) model. Although much more computationally expensive than the fluid codes, the full-PIC codes allowed for non-equilibrated thruster regions and did not rely on Maxwellian distributions. However, these simulations suffered for two main reasons. First, due to the high computational cost, fine meshing near boundaries which would have been required to properly resolve wall sheaths was often not attempted. Second, PIC is inherently a statistically noisy method and often the extreme tails of energy distributions would not be adequately sampled due to high energy particle dissipation. The current work initiates a third generation of Hall thruster simulation. A PIC-Vlasov hybrid model was implemented utilizing adaptive meshing techniques to enable automatically scalable resolution of fine structures during the simulation. The code retained the accuracy and versatility of a PIC simulation while intermittently recalculating and smoothing particle distribution functions within individual cells to ensure full velocity space coverage. A non-Monte Carlo collision technique was also implemented to reduce statistical noise.
(cont.) This thesis details the implementation and thorough benchmarking of that new simulation. The work was conducted with the aid of Delta Search Labs' supercomputing facility and technical expertise. The simulation was fully-parallelized using MPI and tested on a 128 processor SGI Origin machine. We gratefully acknowledge that funding for portions of this work has been provided by the United States Air Force Research Laboratory and the National Science Foundation.
by Justin M. Fox.
S.M.
Korkmaz, Koray Arkon Cemal. "An analytical study of the design potentials in kinetic architecture/." [s.l.]: [s.n.], 2004. http://library.iyte.edu.tr/tezler/doktora/mimarlik/T000485.doc.
Full textBooks on the topic "Kinetic Design"
Eikenes, Jon Olav Husabø. Navimation: A sociocultural exploration of kinetic interface design. Oslo: Oslo School of Architecture and Design, 2010.
Find full textBoretti, Alberto A. Kinetic energy recovery systems for racing cars. Warrendale, Pa: SAE International, 2013.
Find full textPowell, J. David. Kinetic isolation tether experiment: Annual report. [Washington, D.C: National Aeronautics and Space Administration, 1988.
Find full textWoolman, Matt. Moving type: Designing for time and space. Amsterdam: BIS Publishers, 2000.
Find full textWilliams, Claire. Light and typography: a kinetic value within visual communication: M. A. Communication Design Thesis 2001. London: Central Saint Martins College of Art & Design, 2001.
Find full textAmerican Institute of Chemical Engineers. AICHEMI modular instruction: Series G, design of equipment. New York: American Institute of Chemical Engineers, 1986.
Find full textDesigning kinetics for architectural facades: State change. Abingdon, Oxon: Routledge, 2011.
Find full textReaction kinetics and reactor design. 2nd ed. New York: M. Dekker, 2000.
Find full textEngineering biosensors: Kinetics and design applications. San Diego, Calif: Academic, 2002.
Find full text(Firm), Knovel, ed. Engineering biosensors: Kinetics and design applications. San Diego: Academic Press, 2002.
Find full textBook chapters on the topic "Kinetic Design"
Cahen, Roland. "Kinetic Design." In Lecture Notes in Computer Science, 517–30. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-70210-6_33.
Full textSudar, Martina, and Zvjezdana Findrik Blažević. "Enzyme Cascade Kinetic Modelling." In Enzyme Cascade Design and Modelling, 91–108. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-65718-5_6.
Full textCannaerts, Corneel. "Kinetic Pavilion Extendible and Adaptable Architecture." In Computational Design Modelling, 335–40. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-23435-4_38.
Full textBengisu, Murat, and Marinella Ferrara. "Interaction Design with Kinetic Materials." In SpringerBriefs in Applied Sciences and Technology, 81–88. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-76889-2_6.
Full textLemos, F., M. A. N. D. A. Lemos, I. S. Silva, C. Costa, and M. M. Marques. "Modelling Complex Kinetic Systems." In Combinatorial Catalysis and High Throughput Catalyst Design and Testing, 175–204. Dordrecht: Springer Netherlands, 2000. http://dx.doi.org/10.1007/978-94-011-4329-5_6.
Full textLemos, F., C. Costa, J. M. Lopes, C. Pinheiro, X. Wang, and F. Ramôa Ribeiro. "Modelling Complex Kinetic Systems." In Combinatorial Catalysis and High Throughput Catalyst Design and Testing, 205–38. Dordrecht: Springer Netherlands, 2000. http://dx.doi.org/10.1007/978-94-011-4329-5_7.
Full textHofmann, Hanns. "Kinetic Data Analysis and Parameter Estimation." In Chemical Reactor Design and Technology, 69–105. Dordrecht: Springer Netherlands, 1986. http://dx.doi.org/10.1007/978-94-009-4400-8_4.
Full textCharpentier, Lise, Estelle Cruz, Teodor Nenov, Kévin Guidoux, and Steven Ware. "Pho’liage: Towards a Kinetic Biomimetic Thermoregulating Façade." In Bionics and Sustainable Design, 367–401. Singapore: Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-1812-4_12.
Full textDaneshvar, Seyed Hossein, Mehmet Rasit Yuce, and Jean-Michel Redouté. "Kinetic Energy Harvesting Systems Overview." In Design of Miniaturized Variable-Capacitance Electrostatic Energy Harvesters, 1–13. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-90252-0_1.
Full textCuadrado, Víctor. "Kinetic and Kinematic Analysis for Exercise Design: A Practical Approach." In Resistance Training Methods, 49–65. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-81989-7_3.
Full textConference papers on the topic "Kinetic Design"
Wijayarathne, Lasitha, and Frank L. Hammond. "Kinetic Measurement Platform for Open Surgical Skill Assessment." In 2017 Design of Medical Devices Conference. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/dmd2017-3525.
Full textSerban, Radu, and Edward J. Haug. "Kinematic and Kinetic Derivatives in Multibody System Analysis." In ASME 1997 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/detc97/dac-3849.
Full textLee, Ming-Yih, Arthur G. Erdman, and Yevsey Gutman. "Development of Kinematic/Kinetic Performance Tools in Synthesis of Multi-D.O.F. Mechanisms." In ASME 1991 Design Technical Conferences. American Society of Mechanical Engineers, 1991. http://dx.doi.org/10.1115/detc1991-0131.
Full textLee, Ming-Yih, Arthur G. Erdman, and Yevsey Gutman. "Applications of Kinematic/Kinetic Performance Tools in Synthesis of Multi-D.O.F. Mechanisms." In ASME 1991 Design Technical Conferences. American Society of Mechanical Engineers, 1991. http://dx.doi.org/10.1115/detc1991-0130.
Full textCARUSO, PAMELA, and ERIC SCHACHT. "Kinetic Energy Weapon Digital Emulation Center." In Aerospace Design Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1992. http://dx.doi.org/10.2514/6.1992-1071.
Full textBURNS, III, WILLOUGHBY. "Kinetic kill vehicle flight test program." In Aerospace Design Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1992. http://dx.doi.org/10.2514/6.1992-1211.
Full textOsório, Filipa, Alexandra Paio, and Sancho Oliveira. "KOS- Kinetic Origami Surface." In CAADRIA 2014: Rethinking Comprehensive Design: Speculative Counterculture. CAADRIA, 2014. http://dx.doi.org/10.52842/conf.caadria.2014.201.
Full textKim, Sung-Soo, Bongcheol Seo, and Myungho Kim. "A Study on Mixed Kinetic-Kinematic Equations for Multibody Systems." In ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/detc2013-12574.
Full textStanić Loknar, Nikolina, Diana Bratić, and Ana Agić. "Kinetic typography - figuration and technology." In 10th International Symposium on Graphic Engineering and Design. University of Novi Sad, Faculty of technical sciences, Department of graphic engineering and design,, 2020. http://dx.doi.org/10.24867/grid-2020-p81.
Full textMiyoshi, Kensho. "Where Kinesthetic Empathy meets Kinetic Design." In MOCO '18: 5th International Conference on Movement and Computing. New York, NY, USA: ACM, 2018. http://dx.doi.org/10.1145/3212721.3212847.
Full textReports on the topic "Kinetic Design"
Huang, Hanchen. Control of New Kinetic Barriers and Design of Nanorods. Office of Scientific and Technical Information (OSTI), November 2014. http://dx.doi.org/10.2172/1163119.
Full textHanchen Huang. Control of New Kinetic Barriers & Design of Nanorods. Office of Scientific and Technical Information (OSTI), May 2012. http://dx.doi.org/10.2172/1041190.
Full textRajiv Srivastava and M. A. Ebadian. PHOTOCATALYTIC OXIDATION FOR NOx ABATEMENT: DEVELOPMENT OF A KINETIC EXPRESSION AND DESIGN TOOLS. Office of Scientific and Technical Information (OSTI), September 2000. http://dx.doi.org/10.2172/822020.
Full textMichael Harold and Vemuri Balakotaiah. Kinetic and Performance Studies of the Regeneration Phase of Model Pt/Ba/Rh NOx Traps for Design and Optimization. Office of Scientific and Technical Information (OSTI), May 2010. http://dx.doi.org/10.2172/1004579.
Full textRice, S. F., R. G. Hanush, and T. B. Hunter. Kinetic investigation of the oxidation of naval excess hazardous materials in supercritical water for the design of a transpiration-wall reactor. Office of Scientific and Technical Information (OSTI), January 1997. http://dx.doi.org/10.2172/477548.
Full textLee, Y. Y., P. Iyer, Q. Xiang, and J. Hayes. Kinetic and Modeling Investigation to Provide Design Guidelines for the NREL Dilute-Acid Process Aimed at Total Hydrolysis/Fractionation of Lignocellulosic Biomass: July 1998. Office of Scientific and Technical Information (OSTI), August 2004. http://dx.doi.org/10.2172/15009501.
Full textLahav, Ori, Albert Heber, and David Broday. Elimination of emissions of ammonia and hydrogen sulfide from confined animal and feeding operations (CAFO) using an adsorption/liquid-redox process with biological regeneration. United States Department of Agriculture, March 2008. http://dx.doi.org/10.32747/2008.7695589.bard.
Full textKlein, M. T., H. C. Foley, W. H. Calkins, and C. Scouten. Kinetics assisted design of catalysts for coal liquefaction. Final report. Office of Scientific and Technical Information (OSTI), February 1998. http://dx.doi.org/10.2172/629370.
Full textRofer, C. K. Kinetics experiments and bench-scale system: Background, design, and preliminary experiments. Office of Scientific and Technical Information (OSTI), October 1987. http://dx.doi.org/10.2172/6082644.
Full textYoung, E. R., and F. R. Norwood. Numerical analysis of designs to reduce the kinetic energy of Davis Gun pusher plates. Office of Scientific and Technical Information (OSTI), April 1989. http://dx.doi.org/10.2172/6092235.
Full text