Relevant bibliographies by topics / Jet cutting

Academic literature on the topic 'Jet cutting'

Author: Grafiati
Published: 4 June 2021
Last updated: 31 January 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Jet cutting.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Jet cutting"

1

David, P. P., C. K. Bonsi, E. Bonsi, R. D. Pace, O. Clark, and L. C. Garner Carva. "EFFECTS OF SEQUENTIAL FOLIAGE TOPPING ON YIELD OF TWO SWEETPOTATO CULTIVARS." HortScience 28, no. 4 (April 1993): 266D—266. http://dx.doi.org/10.21273/hortsci.28.4.266d.

Full text
Abstract:
The effects of sequential foliage topping on two sweetpotato [Ipomoea batatas (L) Lam cvs Georgia Jet, TU-82-18921 cultivars were investigated in a field trial. Three initial foliage cuttings (15 cm cutting from the growing tip) were initialed at 45.60 and 75 days after planting (DAP). Each initial cutting date was followed by zero, one or two cuttings at biweekly intervals. Total storage root yields were not affected by cutting treatments regardless of the cultivar investigated. Both cultivars differed in their response in dry matter accumulation, while Georgia Jet was not affected by cutting treatments, TU-82-1892 accumulated less dry matter when foliage tips were removed twice during the growth cycle (75.90 DAP) compared to all other cutting treatments. The amount of foliage tips removed from each cultivar differed significantly over all treatment levels with Georgia Jet producing more foliage tips than TU-82-1892. However. production of foliage tips for both cultivars was greatest when foliage cutting was delayed until 75 DAP.
APA, Harvard, Vancouver, ISO, and other styles
2

Volgina, Ludmila, and Stanislav Sergeev. "Water jet cutting resistance." IOP Conference Series: Materials Science and Engineering 869 (July 10, 2020): 072035. http://dx.doi.org/10.1088/1757-899x/869/7/072035.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Ferenc, K. "Cutting with water jet." Welding International 21, no. 10 (October 2007): 730–35. http://dx.doi.org/10.1080/09507110701668747.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Cui, Dandan, Hongwen Li, Jin He, Qingjie Wang, Caiyun Lu, Hongnan Hu, Xiupei Cheng, and Chunlei Wang. "Applications of Water Jet Cutting Technology in Agricultural Engineering: A Review." Applied Sciences 12, no. 18 (September 7, 2022): 8988. http://dx.doi.org/10.3390/app12188988.

Full text
Abstract:
Cutting is a significant part of agricultural material processing, and the cutting technology determines the quality of agricultural products. Water jet cutting technology is a non-contact and cold cutting technology suitable for cutting agricultural materials. It can realize an environmentally friendly cutting process avoiding such problems as heat generation, sharpening and cleaning blades, and microbial cross-contamination. This paper reviews the current status of water jet cutting of six kinds of agricultural materials, including vegetables, fruits, meats, woods, stems, and soils. By analyzing how to complete different cutting operations, improve cutting ability, or control post-cutting influences, the problems and solutions of water jet cutting of each material are summarized. Then, combined with the application requirements, some suggestions are put forward for developing water jet cutting technology. The results would help researchers determine key information required by cutting agricultural materials and provide a reference for further research on water jet cutting technology in agricultural engineering.
APA, Harvard, Vancouver, ISO, and other styles
5

Šúňová, Anna, Roman Šúň, Emil Spišák, and Mária Franková. "The assessment of properties for selected factors in abrasive water jet process." Acta Metallurgica Slovaca 21, no. 3 (September 30, 2015): 203. http://dx.doi.org/10.12776/ams.v21i3.586.

Full text
Abstract:
The article presents the current conditions of abrasive water jet cutting process and factors relative to the quality of cutting surface. The main goal of research was to evaluate the assessment of the cutting depth, corrugated bottom cutting edge and roughness of the specimens depending on selected factors such as cutting velocity and abrasive amount in the abrasive water jet process. Specimen were cut in four phases as a square. Main results were that the distance between water jet entering and water jet leaving is decreased with the increasing abrasive amount and by following lower cutting rates. The increasing of a cutting rate negatively effects the quality of the cut surface and the size of the distance between water jet entering and water jet leaving, because the increasing of a cutting rate increases also values of the mentioned parameters. As to the distance between water jet entering and water leaving, the abrasive amount of 200-250 g.min-1 at the rate of 50 mm.min-1 is considered to be optimal, but outside this range the influence of the abrasive amount impacts negatively, primarily on water jet entering and water jet leaving that has a direct influence on the corrugated bottom cutting edge.
APA, Harvard, Vancouver, ISO, and other styles
6

Kido, Hidetaka. "Practical Side of Cutting. (4). Water Jet Cutting." Journal of the Japan Welding Society 62, no. 2 (1993): 73–77. http://dx.doi.org/10.2207/qjjws1943.62.73.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kubik, Anna, and Leonhard Kleiser. "Multiphase Jet Flow in Abrasive Water Jet Cutting." PAMM 9, no. 1 (December 2009): 457–58. http://dx.doi.org/10.1002/pamm.200910201.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Su, Yu. "3D FEM Simulation of Water Vapor Jet Assisted Metal Cutting." Open Mechanical Engineering Journal 8, no. 1 (April 18, 2014): 132–37. http://dx.doi.org/10.2174/1874155x20140501007.

Full text
Abstract:
Water vapor jet assisted metal cutting is a pollution-free green cutting technique. This paper has developed a three-dimensional finite element model of water vapor jet assisted cutting in order to understand the influence of its cooling and lubricating effect on cutting process. The cooling effect of water vapor jet is modeled with a convective heat transfer coefficient. A window with the temperature and the heat transfer coefficient of water vapor jet, which can move at the same speed as the tool, has been defined on the tool face so as to continuously simulate cooling process of the cutting zone under water vapor jet condition. Friction contact between tool and chip is modeled by a constant shear model. The shear friction factor with different values has been set to study the influence of lubricating effect of water vapor jet. Simulation results show that compared with its cooling effect, the lubricating effect of water vapor jet is more effective to reduce cutting force and tool temperature. A further improvement in the lubricating effect of water vapor jet also results in an obvious reduction in cutting force and tool temperature. The findings obtained in this study may provide helpful information for developing water vapor jet assisted cutting process.
APA, Harvard, Vancouver, ISO, and other styles
9

Uhlmann, E. Prof, P. John, and J. Mankiewicz. "Strahlschneiden mit flüssigem CO2 als Strahlmedium*/Jet cutting with liquid CO2 as jet medium - Qualifying high pressure CO2 jet cutting and comparison to water jet cutting." wt Werkstattstechnik online 106, no. 10 (2016): 775–80. http://dx.doi.org/10.37544/1436-4980-2016-10-101.

Full text
Abstract:
Hochdruckstrahlschneiden mit flüssigem CO2 bietet die Möglichkeit der trockenen sowie rückstandsfreien Bearbeitung unterschiedlichster Werkstoffe. Mithilfe eines experimentellen Versuchsstands können flüssige CO2-Strahlen mit einem Druck von bis zu 3000 bar erzeugt werden, die nach dem Austritt aus der Düse – trotz Atmosphärenbedingungen und Übergang in die Gasphase – zeitweise für die Bearbeitung von Werkstücken sowie Oberflächen nutzbar sind. Erste Versuche führten zu Grundlagenwissen über Strahlstoßkraft und Kerbgeometrien.   Cutting with a high-pressure CO2 jet has the potential for a dry and residue-free machining of various materials. With an experimental system a high-pressure liquid CO2 jet with up to 3000 bar expands into atmospheric pressure after exiting the nozzle and can be used for the machining of parts and surfaces. Investigations led to basic knowledge about jet force and notch geometries.
APA, Harvard, Vancouver, ISO, and other styles
10

Xia, Ji Sheng, Qing Zhu Jia, and Zhen Zhen Sun. "Pre-Mixed Abrasive Water Jet Cutting in the Marble." Advanced Materials Research 981 (July 2014): 818–21. http://dx.doi.org/10.4028/www.scientific.net/amr.981.818.

Full text
Abstract:
High-pressure abrasive water jet cutting is a cold and non-traditional method, with many advantage which the traditional processing do not have.The traditional method of cutting marble have rough sections, poor dimensional accuracy, large seam, high tool cost and the processing efficiency is low. Can be considered high-pressure abrasive water jet cutting to improve its traditional cutting defects. This article explores the use of the pre-mixed abrasive water jet cutting in the marble, and its comparison with traditional methods, highlighting the advantages which the pre-mixed abrasive water jet cutting in the marble.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Jet cutting"

1

劉醒培 and Shing-pui Alex Lau. "Effect of air jet in metal cutting." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1985. http://hub.hku.hk/bib/B31207303.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Lau, Shing-pui Alex. "Effect of air jet in metal cutting /." [Hong Kong : University of Hong Kong], 1985. http://sunzi.lib.hku.hk/hkuto/record.jsp?B12350060.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Sucosky, Philippe. "Water jet cutting of silicon : kerf width prediction." Thesis, Georgia Institute of Technology, 2000. http://hdl.handle.net/1853/17511.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Lamache, Anthony. "Feasibility study of abrasive waterjet silicon cutting." Thesis, Georgia Institute of Technology, 1998. http://hdl.handle.net/1853/15827.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

葉樹和 and Shu-wo Patrick Ip. "On the effect of air jet in metal cutting." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1994. http://hub.hku.hk/bib/B31211483.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Arab, Paola Bruno. "Rock cutting by abrasive water jet: an energy approach." Universidade de São Paulo, 2017. http://www.teses.usp.br/teses/disponiveis/18/18132/tde-11072017-152834/.

Full text
Abstract:
Abrasive waterjet (AWJ) cutting is a versatile technique which has been effectively applied to rock cutting since the late 1980s. The complexity of the interaction between the waterjet and the rocks complicates the thorough understanding of the phenomena involved in AWJ rock cutting. On one hand, rocks are complex materials which are generated through different processes in an uncontrolled environment without human interference. On the other hand, the AWJ acts with high velocity and turbulence, complicating direct observation and the perception of details. In this respect, the present research aims to contribute to the study of AWJ cutting applied to rocks, including the analysis of qualitative and quantitative information, both of great importance regarding the study of complex materials. Concerning quantitative data, special attention is given to the investigation of the cutting efficiency, which can be analyzed by observing conditions in which the higher cutting rate is associated with the minimum energy provided by the AWJ machine per removed volume of rock. Moreover, the real efficiency can be analyzed through the investigation of the conditions in which the major part of the energy provided by the AWJ machine is used effectively for rock cutting, deducting dissipation losses. The effects of varying traverse velocity and pump pressure on cutting parameters were also investigated, in addition to the influence of rock properties on the effective energy of cutting. The effective energy was calculated based both on the specific energy and specific destruction work of the materials. With respect to the qualitative investigation, petrographic and scanning electron microscopy (SEM) analyses were conducted in order to visualize and better understand the different effects of cutting on the studied rocks. Cutting tests with a traverse velocity of 200 mm/min and a pump pressure of 400 MPa presented the most efficient rock cutting regarding both methods of efficiency analysis. Dry density and tensile strength presented fair correlations with the effective cutting energy, while the modulus ratio presented the best correlations. It was observed that brittleness plays a key role in the understanding of the phenomena involved in AWJ rock cutting.
O jato d\'água abrasivo (AWJ) é uma técnica versátil que tem sido efetivamente aplicada ao corte de rochas desde o fim da década de 1980. A complexidade da interação entre o jato e as rochas dificulta a compreensão detalhada dos fenômenos envolvidos no corte de rochas com AWJ. Por um lado, rochas são materiais complexos gerados em ambientes sem interferência humana. Por outro lado, o AWJ age com alta velocidade e turbulência, dificultando a observação direta do procedimento. Assim, a presente tese de doutorado visa a contribuir com o estudo do corte de rochas com AWJ, incluindo análises de dados qualitativos e quantitativos, ambos de grande importância em estudos de materiais complexos. A análise quantitativa possui foco na investigação da eficiência de corte, a qual pode ser analisada por meio da observação das condições em que há a maior taxa de corte associada à mínima energia fornecida pelo AWJ por volume de rocha removido. Além disso, a eficiência real do corte pode ser analisada a partir da investigação das condições em que a maior parte da energia fornecida pelo AWJ é usada para efetivamente cortar a rocha, descontando perdas por dissipação. Os efeitos da variação da velocidade transversal de corte e da pressão da bomba nos parâmetros de corte também foram investigados, além da influência das propriedades das rochas na energia efetiva de corte. A energia efetiva de corte, denominada energia relativa de formação da ranhura (EKR), foi calculada com base na energia específica e no trabalho de destruição específico dos materiais. Análises de microscopia eletrônica de varredura (SEM) e petrografia foram conduzidas para visualizar e compreender melhor os diferentes efeitos do corte nas rochas estudadas. Os testes de corte realizados com velocidade transversal do bocal de 200 mm/min e pressão da bomba de 400 MPa apresentaram as melhores eficiências de corte considerando-se ambos os métodos de análise de eficiência. Dentre as propriedades das rochas investigadas, a massa específica e a resistência à tração por compressão diametral apresentaram correlações razoáveis com EKR, enquanto que o modulus ratio apresentou as melhores correlações. Observou-se que a ruptibilidade possui papel fundamental na compreensão dos fenômenos envolvidos no corte de rochas com AWJ.
APA, Harvard, Vancouver, ISO, and other styles
7

Ohlsson, Lars. "Abrasive water jet cutting : an experimental and theoretical investigation." Licentiate thesis, Luleå tekniska universitet, 1992. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-17801.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Ip, Shu-wo Patrick. "On the effect of air jet in metal cutting /." [Hong Kong] : University of Hong Kong, 1994. http://sunzi.lib.hku.hk/hkuto/record.jsp?B13793810.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Pianthong, Kulachate Mechanical &amp Manufacturing Engineering Faculty of Engineering UNSW. "Supersonic liquid diesel fuel jets : generation, shock wave characteristics, auto-ignition feasibilities." Awarded by:University of New South Wales. School of Mechanical and Manufacturing Engineering, 2002. http://handle.unsw.edu.au/1959.4/20325.

Full text
Abstract:
It is well known that high-speed liquid jetting is one of the most powerful techniques available to cut or penetrate material. Recently, it has been conjectured that high-speed liquid jets may be beneficial in improving combustion in such applications as SCRAM jets and direct injection diesel engines. Although there are practical limitations on maximum jet velocity, a fundamental study of the characteristics of high-speed liquid fuel jets and their auto-ignition feasibility is necessary. Important benefits could be increased combustion efficiency and enhanced emission control from improved atomisation. The generation of high-speed liquid jets (water and diesel fuel) in the supersonic to hypersonic ranges by use of a vertical single stage powder gun is described. The effect of the projectile velocity and projectile mass on the jet velocity is found experimentally. Jet exit velocities from a range of different nozzle inner profiles and nozzle hardness are thoroughly examined. The characteristics and behaviour of the high-speed liquid jet and its leading bow shock wave have been studied with the aid of a shadowgraph technique. This provides a clearer picture of each stage of the generation of hypersonic liquid jets. It makes possible the study of hypersonic diesel fuel jet characteristics and their potential for auto-ignition. The fundamental processes by which a supersonic liquid jet is generated by projectile impact have been investigated. The momentum transfer from the projectile to the liquid and the shock wave reflection within the nozzle cavity are the key items of interest. A new one-dimensional analysis has been used in order to simplify this complex and difficult problem. The impact pressure obtained from the projectile was firstly derived. Then, an investigation of the intermittent pressure increase in a closed end cavity and a simple stepped, cross-sectional nozzle were carried out. The nozzle pressure and final jet velocity were estimated and compared to a previous method and to experimental results. Some interesting characteristics found in the experiments relate well to those anticipated by the analysis. The characteristics of a hypersonic diesel fuel jet and its leading edge shock wave were assessed for their potential for auto-ignition using fuel with cetane numbers from 50-100. The investigations were performed at normal ambient air and at elevated air (110 ???C) temperature. So far, there is no sign of auto-ignition that may occur because of the temperature rise of the induced shock.
APA, Harvard, Vancouver, ISO, and other styles
10

Goodfellow, Paul R. A. "The influence of microstructural rock properties on water jet assisted cutting." Thesis, University of Exeter, 1990. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.259193.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Jet cutting"

1

Lichtarowicz, A. Jet Cutting Technology. Dordrecht: Springer Netherlands, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Lichtarowicz, A., ed. Jet Cutting Technology. Dordrecht: Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-011-2678-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wood, P. A. Water jet/jet assisted cutting and drilling. London: IEA Coal Research, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Swanson, David E. Collimated abrasive water-jet behavior. Washington, D.C: U.S. Dept. of the Interior, Bureau of Mines, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Swanson, David E. Collimated abrasive water jet behavior. Washington, DC: Dept. of the Interior, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Timko, Robert J. Water-jet-assisted roadheaders. Pittsburgh, Pa: U.S. Dept. of the Interior, Bureau of Mines, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kovscek, P. D. Techniques to increase water pressure for improved water-jet-assisted cutting. [Avondale, Md.]: U.S. Dept. of the Interior, Bureau of Mines, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kovscek, P. D. Techniques to increase water pressure for improved water-jet-assisted cutting. Washington, DC: U.S. Dept. of the Interior, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Momber, Andreas W. Principles of abrasive water jet machining. London: Springer, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Waterjetting technology. London: E & FN Spon, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Jet cutting"

1

Kong, Carol. "Water-Jet Cutting." In CIRP Encyclopedia of Production Engineering, 1–5. Berlin, Heidelberg: Springer Berlin Heidelberg, 2018. http://dx.doi.org/10.1007/978-3-642-35950-7_16697-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kong, Carol. "Water-Jet Cutting." In CIRP Encyclopedia of Production Engineering, 1297–301. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-20617-7_16697.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kong, Carol. "Water-Jet Cutting." In CIRP Encyclopedia of Production Engineering, 1803–7. Berlin, Heidelberg: Springer Berlin Heidelberg, 2019. http://dx.doi.org/10.1007/978-3-662-53120-4_16697.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Li, H. Y., E. S. Geskin, and E. I. Gordon. "Investigation of the Pure Waterjet-Workpiece Interaction." In Jet Cutting Technology, 3–15. Dordrecht: Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-011-2678-6_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Fowell, R. J., and J. A. Martin. "Water Jet Assisted Coal Cutting." In Jet Cutting Technology, 149–65. Dordrecht: Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-011-2678-6_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Ohga, Kotaro, Kiyoshi Higuchi, and Kouji Sato. "Problems on the Development of Some Machines assisted by Water-Jets in Japanese Coal Mines." In Jet Cutting Technology, 167–83. Dordrecht: Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-011-2678-6_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Summers, David A., and Jianchi Yao. "Room and Pillar in-Seam Excavator and Roof Supporter (Rapiers)." In Jet Cutting Technology, 185–203. Dordrecht: Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-011-2678-6_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Jarno, Leszek, Antoni Kalukiewicz, and Adam Klich. "Possibility of Using Jet Cutting Technology in Polish Mining Industry." In Jet Cutting Technology, 205–15. Dordrecht: Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-011-2678-6_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Fowell, R. J., S. T. Gillani, and A. Waggott. "Water Jet Assisted Rock Cutting - The Importance of Jet Position." In Jet Cutting Technology, 217–31. Dordrecht: Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-011-2678-6_14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Summers, D. A., J. Yao, J. G. Blaine, R. D. Fossey, and L. J. Tyler. "Low Pressure Abrasive Waterjet Use for Precision Drilling and Cutting of Rock." In Jet Cutting Technology, 233–51. Dordrecht: Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-011-2678-6_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Jet cutting"

1

Brozek, Milan. "Steel cutting using abrasive water jet." In 16th International Scientific Conference Engineering for Rural Development. Latvia University of Agriculture, Faculty of Engineering, 2017. http://dx.doi.org/10.22616/erdev2017.16.n014.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Chryssolouris, G., and W. C. Choi. "Gas Jet Effects On Laser Cutting." In OE/LASE '89, edited by James D. Evans and Edward V. Locke. SPIE, 1989. http://dx.doi.org/10.1117/12.951267.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

de Vries, V., R. Moser, and Ph Roth. "Automated abrasive water jet pin cutting system." In 2010 1st International Conference on Applied Robotics for the Power Industry (CARPI 2010). IEEE, 2010. http://dx.doi.org/10.1109/carpi.2010.5624467.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Sun, Xiaobo, Haiying Wang, Xiangbing Kong, and Yue Cui. "Water-jet Cutting System Based on Phased Intensifier." In 2007 2nd IEEE Conference on Industrial Electronics and Applications. IEEE, 2007. http://dx.doi.org/10.1109/iciea.2007.4318569.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Perrottet, Delphine, Simone Amorosi, and Bernold Richerzhagen. "Water-jet guided fiber lasers for mask cutting." In ICALEO® 2005: 24th International Congress on Laser Materials Processing and Laser Microfabrication. Laser Institute of America, 2005. http://dx.doi.org/10.2351/1.5060535.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Huang, Zhonghua, and Ya Xie. "Cutter Cutting Cobalt-Rich Crusts with Water Jet." In 2011 Second International Conference on Digital Manufacturing and Automation (ICDMA). IEEE, 2011. http://dx.doi.org/10.1109/icdma.2011.89.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Annoni, M., L. Cristaldi, M. Norgia, and C. Svelto. "Electro-Optic Velocity Measurement of Water Jet Cutting Plants." In 2007 IEEE Instrumentation & Measurement Technology Conference IMTC 2007. IEEE, 2007. http://dx.doi.org/10.1109/imtc.2007.379158.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Daniel, Jucan. "EXPERIMENTAL RESULTS FOR MATERIALS CUTTING WITH ABRASIVE WATER JET." In 14th SGEM GeoConference on SCIENCE AND TECHNOLOGIES IN GEOLOGY, EXPLORATION AND MINING. Stef92 Technology, 2014. http://dx.doi.org/10.5593/sgem2014/b13/s3.035.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Perrottet, Delphine, Simone Amorosi, and Bernold Richerzhagen. "New process for screen cutting: water-jet guided laser." In Workshop on Building European OLED Infrastructure, edited by Thomas P. Pearsall and Jonathan Halls. SPIE, 2005. http://dx.doi.org/10.1117/12.629058.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Denissen, L., V. Massaut, M. Klein, J. Dadoumont, and H. Davain. "High Pressure Abrasive Water Jet Cutting As a Dismantling Tool." In ASME 2001 8th International Conference on Radioactive Waste Management and Environmental Remediation. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/icem2001-1284.

Full text
Abstract:
Abstract Since 1989, SCK•CEN is dismantling the BR3 (Belgian Reactor no3). During these 11 years of decommissioning, a lot of experience is gained in the field of remotely controlled cutting techniques for high active parts and decontamination techniques of highly contaminated parts. Mechanical cutting techniques (circular saw and band saw) were used for cutting the reactor Pressure Vessel (RPV) and its internals. For some large components in the reactor building, like the steam generator, the pressurizer and the Neutron Shield Tank, a new tool, the High Pressure Abrasive Water Jet Cutting will be used to cut activated and contaminated pieces with material thicknesses ranging from 20 to 170 mm. Deliverance of the cutting equipment is foreseen in the summer of 2001. Cold tests and training sessions for the operators will then take place and by the beginning of 2002 the cutting equipment will be installed in the reactor pool inside the controlled area to start the actual work.
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Jet cutting"

1

Krogstad, Eirik. Testing of Alternative Abrasives for Water-Jet Cutting at C Tank Farm. Office of Scientific and Technical Information (OSTI), August 2013. http://dx.doi.org/10.2172/1165334.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Haslett, G. A., G. R. Corbett, and D. A. Young. An investigation into the effect of varying water pressure and flow rates upon the release of airborne respirable dust by a DOSCO MKIIB roadheader equipped with a water jet assisted cutting head. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1986. http://dx.doi.org/10.4095/304884.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Haslett, G. A., G. R. Corbett, and D. A. Young. An investigation into the effect of varying water pressure and flow rates upon the release of airborne respirable dust by a DOSCO MKIIB roadheader equipped with a water jet assisted cutting head. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1986. http://dx.doi.org/10.4095/304912.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Jet cutting' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography