Relevant bibliographies by topics / ISO 14 001 standard

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'ISO 14 001 standard'

Author: Grafiati
Published: 28 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'ISO 14 001 standard.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "ISO 14 001 standard"

1

Kadaoui, Mohammed, Abderrahime Bouali, and Mourad Arabi. "Assessment of physicochemical and bacteriological groundwater quality in irrigated Triffa Plain, North-East of Morocco." Journal of Water and Land Development 42, no. 1 (September 1, 2019): 100–109. http://dx.doi.org/10.2478/jwld-2019-0050.

Full text
Abstract:
Abstract The physicochemical and bacteriological quality of groundwater was assessed to show the impact of the agriculture and human activities in the Triffa Plain located in North-East of Morocco. The current levels of contamination of the groundwater were estimated by analysing electrical conductivity, nitrate, nitrite, ammonia, orthophosphate, and indicators of faecal pollution content. Water samples from 55 locations were collected during two period of time, the wet and the dry season of the year 2016. Result obtained indicated that most samples are highly contaminated. The electrical conductivity varied from 800 to 9 100 μS∙cm−1. Nitrate levels ranged from 25 to 216 mg·dm−3, with 78% of samples exceeding the critical level value set at 50 mg·dm−3. Nitrate concentrations are slightly higher during the wet period in 73% of studied cases. Nitrite rarely exceeded the normal rate fixed by World Health Organization and reached 0.90 mg·dm−3. Ammonia and orthophosphate contents do not exceed these norms. The study revealed a wide contamination of groundwater by microbial agents such as, total coliforms, faecal coliforms and faecal streptococci, with content ranged from 0 to 14 000, 0 to 5 000 and 0 to 5 000 CFU·(100 cm3)−1 respectively, confirming the impact of septic tanks, wastewater discharge into rivers without treatment, and the use of animal waste on the ground water vulnerability. Samplings and measurements were carried out according to the international standard ISO 13395, ISO 11732 and ISO 15681-2 for chemical compounds and ISO 9308-1 and ISO 7899-2 for microbiological numerations.
APA, Harvard, Vancouver, ISO, and other styles
2

Peri, Yogev, Ben Sadeh, Chen Sherez, Aviram Hochstadt, Simon Biner, Galit Aviram, Meirav Ingbir, et al. "Quantitative assessment of effective regurgitant orifice: impact on risk stratification, and cut-off for severe and torrential tricuspid regurgitation grade." European Heart Journal - Cardiovascular Imaging 21, no. 7 (October 23, 2019): 768–76. http://dx.doi.org/10.1093/ehjci/jez267.

Full text
Abstract:
Abstract Aims Asses the added value of quantitative evaluation of tricuspid regurgitation (TR), the proper cut-off value for severe TR and ‘torrential TR’ based on outcome data. The added value of quantitative evaluation of TR, and the cut-off values associated with increased mortality are unknown. Methods and results In patients with all-cause TR assessed both qualitatively and quantitatively by proximal iso-velocity surface area method, long-term and 1-year outcome analysis was conducted. Thresholds for excess mortality were assessed using spline curves, receiver-operating characteristic curves, and minimum P-value analysis. The study involved 676 patients with all-cause TR (age 73.9 ± 14 years, male 45%, ejection fraction 52.9 ± 14%). Effective regurgitant orifice (ERO) was strongly associated with decreased survival in unadjusted [hazard ratio (HR) 2.38 (1.79–3.01), P < 0.0001 per 0.1 cm2 increment] and adjusted [2.6 (1.25–5.0), P = 0.01] analyses. Quantitative grading was superior to qualitative grading in prediction of outcome (P < 0.01). The optimal cut-off value for the best separation in survival between groups of patients with severe vs. lesser degree of TR was 0.35 cm2 [P < 0.0001, HR =2.0 (1.5–2.7)]. ERO negatively impacted survival, even when including only the subgroup of patients with severe TR [HR 1.5 (1.01–2.3); P = 0.04]. The optimal threshold corresponding for the best separation for survival between groups of patients with severe vs. ‘torrential’ TR was 0.7 cm2 [P = 0.005, HR =2.6 (1.2–5.1)]. Conclusion TR can be severe and even ‘torrential’ and is associated with excess mortality. Quantitative assessment of TR by ERO measurement is a powerful independent predictor of outcome, superior to standard qualitative assessment. The optimal cut-off above which mortality is increased is 0.35 cm2, similar albeit slightly lower than suggested in recent guidelines. Torrential TR >0.7 cm2 is associated with poorer survival compared to patients with severe TR (ERO > 0.4 cm2 and <0.7 cm2).
APA, Harvard, Vancouver, ISO, and other styles
3

Nhidza, A. Z., C. Gufe, J. Marumure, Z. Makuvara, T. Chisango, G. T. Hanyire, G. Jongi, P. V. Makaya, and T. S. Marambe. "Prevalence and Antibiograms of Salmonella in Commercially Produced Crocodile meat in Zimbabwe." Tanzania Veterinary Journal 36, no. 1 (August 28, 2021): 1–14. http://dx.doi.org/10.4314/tvj.v36i1.1.

Full text
Abstract:
The presence of Salmonella in food products and emergence of antibiotic resistance are the major challenges facing public health policies. A total of 2749 crocodile meat samples obtained from the Central Veterinary Laboratories in Zimbabwe were screened for Salmonella specieswere collected from three Zimbabwean commercial farms between the year 2012 and 2019 for a retrospective observational study to determine the prevalence and magnitude of antibiotics resistant Salmonella species in crocodile meat. The isolation of Salmonella was in accordance with the ISO 6579:2002 and the antibiotic susceptibility testing was carried out based on Clinical and Laboratory Standard Institute’s recommendations by means of the Kirby-Bauer disk diffusion method. SILAB Database was used to determine the prevalence of Salmonella species. Prevalence was stratified by year and farms. Twenty Salmonella isolates were identified using biochemical tests, and 15 were confirmed by polymerase chain reaction (PCR). Antimicrobial susceptibility profiles of the confirmed Salmonella isolates were examined using 14 antibiotics. The overall prevalence of Salmonella species in crocodile meat samples was 0.5%. The prevalence of Salmonella species ranged from 0.04% to 0.44% in the crocodile meat samples and annual prevalence ranged from 0.01% to 1%. The highest prevalence of Salmonella (4.4%) was recorded in the year 2012. Salmonella isolates from one of the three tested farms were resistant to Erythromycin (73.33%), Ampicillin (80%), and Penicillin G (100%). Generally, Salmonella isolates displayed lower resistance to Cefepime, Ceftriaxone, Amikacin, Tetracycline, Ertapenem, Florfenicol, and Erythromycin (0-53.33%) whereas all Salmonella isolates showed susceptibility to Cefepime, Ceftriaxone, Ertapenem, and Florfenicol. Although the study indicates low prevalence of Salmonella species in crocodile meat, there is a need for strict implementation of Hazard Analysis Critical Control Point (HACCP) to reduce contamination rates in meat and its products
APA, Harvard, Vancouver, ISO, and other styles
4

Pendrill, L. R., A. Allard, N. Fischer, P. M. Harris, J. Nguyen, and I. M. Smith. "Software to Maximize End-User Uptake of Conformity Assessment With Measurement Uncertainty, Including Bivariate Cases. The European EMPIR CASoft Project." NCSL International Measure 13, no. 1 (February 2021): 58–69. http://dx.doi.org/10.51843/measure.13.1.6.

Full text
Abstract:
Facilitating the uptake of established methodologies for risk-based decision-making in product conformity assessment taking into account measurement uncertainty by providing dedicated software is the aim of the European project EMPIR CASoft(2018–2020), involving the National Measurement Institutes from France, Sweden and the UK, and industrial partner Trescal (FR) as primary supporter. The freely available software helps end-users perform the required risk calculations in accordance with current practice and regulations and extends that current practice to include bivariate cases. The software is also aimed at supporting testing and calibration laboratories in the application of the latest version of the ISO/IEC 17025:2017 standard, which requires that“…the laboratory shall document the decision rule employed, taking into account the level of risk […] associated with the decision rule and apply the decision rule.” Initial experiences following launch of the new software in Spring 2020 are reported.
APA, Harvard, Vancouver, ISO, and other styles
5

Ploska, Ute, Renate Gildenhaar, and Georg Berger. "Resorbable Biomaterials Based on Calcium Phosphates: Determination of In Vitro Solubility Applying the ISO 10993-14 (First Experiences)." Key Engineering Materials 284-286 (April 2005): 485–88. http://dx.doi.org/10.4028/www.scientific.net/kem.284-286.485.

Full text
Abstract:
To guarantee of the security of ceramic medical products the identification and quantification of the current degradation products is required by the ISO 10993-14 standard. Two methods - the gravimetrical registration of the mass loss and the quantitative determination of the leached ions by spectrometric methods - are planned. When checking the application of the ISO standard to calcium phosphate ceramics that can be used as implant materials a considerable difference in the results obtained with both methods was observed. It seems to be that precipitation reactions are responsible for that situation. To clear up the influence of precipitation reactions on the results the working procedure of the ISO standard was slightly modified. A first interpretation of the results is tried.
APA, Harvard, Vancouver, ISO, and other styles
6

Garcia, D., P. Yaman, J. Dennison, and GF Neiva. "Polymerization Shrinkage and Depth of Cure of Bulk Fill Flowable Composite Resins." Operative Dentistry 39, no. 4 (July 1, 2014): 441–48. http://dx.doi.org/10.2341/12-484-l.

Full text
Abstract:
SUMMARY Objective To evaluate polymerization shrinkage and depth of cure of two bulk fill flowable composites, one nanohybrid composite modified to a flowable consistency, and one standard flowable composite, comparing the scraping method to the Knoop hardness test. Methods Two bulk fill flowable composites, SureFil SDR flow (SSF) (Dentsply) and Venus Bulk Fill (VBF) (Heraeus Kulzer), one standard flowable, Filtek Supreme Ultra Flowable (FSUF) (3M/ESPE) (control), and one regular bulk composite that can be made flowable, SonicFill (SF) (Kerr), were used in this study. For polymerization shrinkage (PS), ten 2-mm samples were made for each composite and cured for 20 seconds and shrinkage was measured with a Kaman linometer. For hardness, ten specimens of each composite were made in a 10 × 10-mm mold and cured for 20 seconds; the bottom surface was scraped according to ISO 4049 specification, and the remaining thickness was measured with a micrometer. Hardness samples were prepared at 2-, 3-, 4-, and 5-mm thick ×14-mm diameter, cured for 20 seconds, and polished. After 24 hours of dry storage, a Knoop indenter was applied at 100 g load for 11 seconds. Three readings were made on the top and bottom of each specimen and averaged for each surface to calculate a Knoop hardness value and a bottom/top hardness ratio. One-way analysis of variance and Tukey tests were used to determine significant differences between thicknesses and between test methods for each material. Results PS values were 3.43 ± 0.51%, 3.57 ± 0.63%, 4.4 ± 0.79%, and 1.76 ± 0.53% for FSUF, SSF, VBF, and SF, respectively. VBF showed significantly greater shrinkage (4.4 ± 0.79%), followed by FSUF (3.43 ± 0.51%) and SSF (3.57 ± 0.63%), which were similar, and SF (1.76 ± 0.53%), which had significantly less shrinkage (p<0.05). Values for the scraping method for depth of cure were significantly greater for SSF and VBF (>5.0 mm), followed by SF (3.46 ± 0.16 mm) and FSU (2.98 ± 0.22 mm). Knoop top hardness values (KHN) were: VBF 21.55 ± 2.39, FSUF 44.62 ± 1.93, SSF 29.17 ± 0.76, and SF 72.56 ± 2.4 at 2 mm and were not significantly different at 3-, 4-, and 5-mm thick within each material. Ratios for bottom/top values (depth of cure) for 2, 3, 4, and 5 mm were: VBF 0.80 ± 0.1, 0.78 ± 0.03, 0.67 ± 0.10, and 0.59 ± 0.07, respectively; SSF 0.74 ± 0.08, 0.72 ± 0.08, 0.69 ± 0.18, and 0.62 ± 0.08, respectively; SF 0.82 ± 0.05, 0.68 ± 0.05, 0.47 ± 0.04, and 0.21 ± 0.02, respectively; and FSUF 0.56 ± 0.08 at 2 mm and 0.40 ± 0.08 at 3 mm. The bottom/top ratio was .80 or less at all depths and decreased below 0.70 at 4-mm depth for VBF and SSF, at 3 mm for SF and at 2 mm for FSUF.
APA, Harvard, Vancouver, ISO, and other styles
7

GÜNEŞ BAYIR, AYŞE, Mehmet Gültekin Bilgin, Sümeyra Seyma Kutlu, Dilber Demirci, and Fatma Nur Gölgeci. "Microbiological, chemical and sensory analyzes of produced probiotic yoghurts added clove and propolis." ICONTECH INTERNATIONAL JOURNAL 4, no. 2 (September 15, 2020): 1–14. http://dx.doi.org/10.46291/icontechvol4iss2pp1-14.

Full text
Abstract:
Clove (Syzygium aromaticum) is an aromatic bud has antioxidant, antifungal, antiviral, antimicrobial, antidiabetic, anti-inflammatory, anti-thrombotic, anesthetic, analgesic and insect repellent effects. Propolis is a sticky resinous material with same properties like clove. Therefore, the aim of this study was to produce probiotic yoghurts added propolis (0.03%) and clove in different concentrations (0.1%, 0.3% and 1.0%). Five different probiotic yoghurts were produced, and analyzed for their microbiological, chemical and sensory properties. Microbiological analyzes of probiotic yoghurts were carried out according to IDF and ISO standards. Their chemical and sensory analysis were performed according to Turkish Standards Data were analyzed by SPSS. Propolis showed antibacterial effect except S. thermophilus while clove improve the development of bacteria especially Bifidobacterium. The titratable acidity of all groups was increased while their pH value was decreased. Propolis showed antibacterial effect except S. thermophilus while clove improved the development of bacteria especially Bifidobacterium. Clove and propolis together changed the microbiological, chemical and sensory properties of probiotic yoghurts while probiotic yoghurt with propolis got the lowest score according to sensory properties.
APA, Harvard, Vancouver, ISO, and other styles
8

Maingak, Akmal Zaifullah, Candiwan Candiwan, and Listyo Dwi Harsono. "Information Security Assessment Using ISO/IEC 27001:2013 Standard on Government Institution." TRIKONOMIKA 17, no. 1 (September 17, 2018): 28. http://dx.doi.org/10.23969/trikonomika.v17i1.1138.

Full text
Abstract:
The purpose of this research is to determine the existing gap to achieve ISO/IEC 27001:2013 certification and determine the maturity level of the information system owned by X Government Institution. The information system of X Government Institution would be assessed based on 14 clauses contained in ISO/IEC 27001: 2013. The method used is qualitative method, data collection and data validation with triangulation technique (interview, observation, and documentation). Data analysis used gap analysis and to measure the maturity level of this research used CMMI (Capability Maturity Model for Integration). The result of the research showed that information security which had been applied by X Government Institution was at level 1 (Initial) which meant there was evidence that the institution was aware of problems that needed to be overcome, unstandardized process, and tended to handle the problem individually or by case.
APA, Harvard, Vancouver, ISO, and other styles
9

Handayani, Naniek Utami, Anita Mustikasari, Sabrina Hutagalung, and Baby Monica. "Analysis of implementation of ISO 9001:2015 in SME Aldin Natural Home." SHS Web of Conferences 49 (2018): 01007. http://dx.doi.org/10.1051/shsconf/20184901007.

Full text
Abstract:
SME is required to improve their service quality and resource management for giving customer loyalty toward product offered. The ISO 9001 is one of quality management system standard which is approved globally which are frequently communicated thru service quality insurance to solve the matter of indistinct expectancy Aldin Natural Home is SME engaged in dolls production. In the implementation of quality management system, they have lack on standard operating procedure (SOP). This study aims to analyze and find out the readiness of ISO 9001:2015 implementations in SME Aldin Natural Home. Gap analysis method also is conducted in this research to describe the differences between required and actual quality management systems. The results areSME Aldin Natural Home need to understand and review of implementation of ISO 9001:2015 with the highest 29% on clause 8, Operation while the lowest is 14% on clause 9, Performance Evaluation.
APA, Harvard, Vancouver, ISO, and other styles
10

Briskman, Boris, and Eugene Borson. "Ground Simulation of Space Radiation Effects on Nonmetallic Materials: Status of the Proposed ISO Standard." Journal of the IEST 42, no. 2 (March 14, 1999): 23–31. http://dx.doi.org/10.17764/jiet.42.2.u48263616671q3x6.

Full text
Abstract:
Russia has proposed a new international standard for the testing of nonmetallic materials to simulate space radiation effects. The proposal was submitted to ISO (International Organization for Standardization) Technical Committee 20 (Aircraft and Space Vehicles), Subcommittee 14 (Space Systems and Operations) and was approved as Working Draft 15856 at the Los Angeles meeting (1997). The second version of the draft was approved at the Beijing meeting (1998).
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "ISO 14 001 standard"

1

Silvander, Therese. "Kan en standard för miljökommunikation förbättra miljöprestanda? : Ett examensarbete i samarbete med NQA Nordic AB." Thesis, University of Kalmar, School of Pure and Applied Natural Sciences, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:hik:diva-867.

Full text
Abstract:

Mankind has always been communicating, it is almost impossible to not communicate. The communication tree has grown a new branch, the environmental communication branch, and an ISO standard, the ISO 14 063 Environmental communication- guidelines and examples was issued October 2006. The purpose of this thesis is commissioned by the managing director of NQA Nordic AB in order to examine and analyse how organisations communicate environmental issues today, and how big the need for ISO 14 063 actually is, and further more if there are needs and wishes to make ISO 14 063 a certifiable standard. The main conclusion is that the there is a need for the standard, but it is difficult to say in which form since the knowledge about the standard is far to low among the organisations examined in this thesis. Clarity and transparency as ISO 14 063 promotes are important ingredients in organisations’ environmental work, so sure a standard for environmental communication can help improve environmental performance, for example through opening up for two-way communication and from that on take part of the stakeholders’ opinions.

This study is based on a literature study and a questionnaire survey where 70 organisations (in this case authorities, corporations and non-governmental organisations) randomly chosen from the seven criteria, which ISO 14 001 defines as the environment: land, water, air, flora, fauna, natural resources and man and his collaboration with those. The chosen organisations all have a connection to the environment, directly or indirectly. The authorities are chosen from Sweden’s 16 environmental objectives. To get an extra perspective an interview was made. The results from the questionnaire survey show that there is a big dispersal among the questioned organisations. Some trends are distinguishable. When it comes to communication in common it is often the information manager who communicates, when it comes to environmental subjects it is as often the environmental manager who communicates. The fora which are used for environmental communication are traditional, for example brochures and homepages. Only 6 out of 29 respondents knew about ISO 14 063, compared to 23 out of 29 that knew about ISO 14 001. The results from the questionnaire have been analysed from three perspectives; in total, comparing the different types of organisations and the seven different environmental areas. Authorities have the highest respondent frequency and it seems like they have implemented the environmental best into their tasks. The natural resources organisations among with the water organisations are those best at communicating environmental issues, the humanitarian organisations is in last place. Drawing a conclusion from that, it is easier to take in environmental issues and work with environmental communication the closer to the issue you are. Only one questionnaire answer came from the fauna group, which makes the fauna group difficult to compare with. In general the larger organisations’ answers follow the ISO 14 063 better that the small and medium-sized ones, among many said no thank you to answering the questionnaire because they couldn’t see the connection to their own activity. So the thought about ISO 14 063 also suiting small and medium-sized organisations well does not work in reality Summing up it has been interesting study to do, even though it has been difficult due to the fact that there is little literature about environmental communication.

2008:Nr 4 Teknik

 

 


Människan har i alla tider kommunicerat, och det nästintill omöjligt att inte kommunicera. I detta examensarbete har undersökts hur organisationer kommunicerar miljö i dagsläget och hur stort behovet av miljökommunikationsstandarden ISO 14 063 är och om det finns behov och önskemål att göra den till en certifierbar standard. Slutsatsen är att standarden behövs, men i vilken form är det svårt att uttala sig om då kunskapen om standarden är alldeles för låg hos de undersökta organisationerna. En standard för miljökommunikation kan förbättra miljöprestanda, t.ex. genom att öppna för tvåvägskommunikation och då få del av intressenters åsikter. Studien är ett uppdrag från NQA Nordic AB och baseras på litteraturstudier samt en enkätundersökning där 70 organisationer (i detta fall myndigheter, företag och intresseorganisationer) slumpmässigt valts ut utifrån de sju områden ISO 14 001 definierar som miljö: mark, vatten, luft, flora, fauna, naturresurser samt människan och dess samspel med dessa. De utvalda organisationerna har alla en koppling till miljö, direkt eller indirekt. För att få in ytterligare ett perspektiv genomfördes även en intervju. Enkätresultaten visar att det finns stor spridning bland svaren som spridningen på de tillfrågade organisationerna. Endast 6 av 29 enkätrespondenter kände till ISO 14 063, medan 23 av 29 kände till ISO 14 001. Enkätsvaren har analyserats utifrån tre perspektiv; totalt, jämförande mellan de tre utvalda organisationstyperna samt mellan de sju miljöområdena. Slutsatsen där är att det är lättare att ta till sig miljöarbete och därmed jobba tydligare med miljökommunikation ju närmare miljöproblemen man är. Generellt följer de större organisationernas svar ISO 14 063 bättre än de små och medelstora organisationerna. Så tanken med att ISO 14 063 ska passa även dem fungerar inte i praktiken. Över huvudtaget har det varit en intressant studie att genomföra, även om det har svårt då miljökommunikationslitteraturutbudet varit begränsat.

 

 

APA, Harvard, Vancouver, ISO, and other styles
2

Osičková, Michaela. "Environmentální řízení podniku." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2021. http://www.nusl.cz/ntk/nusl-442895.

Full text
Abstract:
The diploma thesis is focused on the management of the environmental system in the company Fosfa a.s. The first part of the diploma thesis contains theoretical information and definition of the terms environmental management and standards ČSN ISO 14 001. The second part is an analysis and evaluation of the economic situation of the company. Finally, the results and proposals of a standard that improves the current situation and eliminates shortcomings related to the environment are summarized.
APA, Harvard, Vancouver, ISO, and other styles
3

Poláková, Andrea Bc. "Management podniku a životní prostředí." Master's thesis, Vysoká škola ekonomická v Praze, 2007. http://www.nusl.cz/ntk/nusl-1171.

Full text
Abstract:
Teoretická část: Systém environmentálního managementu a ISO 14 001. Aplikační část: popis vybrané společnosti, jejího Systému environmentálního managementu a procesu získávání normy ISO 14 001. Zhodnocení přínosů a změn nastalých certifikací, návrh zlepšujících opatření zjištěných nedostatků v oblasti ochrany životního prostředí.
APA, Harvard, Vancouver, ISO, and other styles
4

Wiedermannová, Pavla. "Zjištění přínosů zavedení systému environmentálního managementu v konkrétních organizacích." Master's thesis, Vysoká škola ekonomická v Praze, 2008. http://www.nusl.cz/ntk/nusl-10589.

Full text
Abstract:
The main goal of the diploma thesis is to specify the main benefits of the implementation of the Enviromental Management System and to find out other information about the already implemented EMS. The thesis is divided into two parts - theoretical and practical. In the theoretical part is clarified the term Environmental Management System, its history and standards for the EMS. In the practical part the questionary is presented as the method of the obtaining data from the concrete organisations. At the same time the answers of the respondents are analysed. The end of the thesis also includes the comparison of the study with the analoguous studies from the past.
APA, Harvard, Vancouver, ISO, and other styles
5

Marcolová, Klímková Markéta. "Návrh modelu integrace nástrojů štíhlé výroby se systémem environmentálního managementu." Doctoral thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2013. http://www.nusl.cz/ntk/nusl-233760.

Full text
Abstract:
The dissertation thesis is focused on increase of the efficiency of production processes in Czech companies, whose main work focus is electric motor production with usage of the lean manufacturing tools with the environmental management system. The main reason for choosing this topic were results of prime study of the target group of companies which has proved that companies do have trouble not just with integration but especially with implementation of the lean manufacturing methods. This is the reason why concrete conditions and basic principles need to be defined to show how to proceed. The objective of this dissertation thesis is to suggest the model of integration of lean manufacturing tools with optional environmental management tool and as the lean manufacturing tools were chosen methods of lean management in production and as an optional environmental tool was chosen system of environmental management based on norm ISO 14 001. For this area of interest the primary and secondary research was used. Based on knowledge from detailed research of Czech and foreign literary sources a survey and guided interview was started with companies, which are focused on electric motor production. The thesis contains a detailed evaluation of empirical research with testing of stated hypothesis, based on which the verbal model of the integration of the lean manufacturing tools with the environmental management system is assembled. The implantation based on the suggested verbal model of the integration in the company should lead not just to the relationship improvement between the company and the environment but also to better understanding of the relationship of two independent kinds of company management leading to saving money, working environment improvement, productivity increase or ecological onus decrease. The benefits can be seen in theoretical, practical and also pedagogical level.
APA, Harvard, Vancouver, ISO, and other styles
6

Rößler, Richard. "Modellgestützte Dokumentation und Integration von Managementsystemen." Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2016. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-210069.

Full text
Abstract:
Im Sinne einer nachhaltigen und ganzheitlichen Firmenentwicklung lässt sich in der Unternehmenslandschaft ein Trend in Richtung einer kontinuierlichen Erweiterung des unternehmerischen Zielsystems beobachten. Neben etablierten Aspekten, wie dem Qualitätsmanagement und der Arbeitssicherheit, erlangen weitere Themen, wie beispielsweise das betriebliche Umwelt- und Energiemanagement, zunehmend an Bedeutung. Um die Berücksichtigung dieser Aspekte nachzuweisen, steht Unternehmen die Möglichkeit zur Zertifizierung nach funktionsspezifischen Managementsystemnormen offen. Die Einführung und Dokumentation entsprechender Managementsysteme erweist sich jedoch als ein zeitintensiver Prozess, dessen Schwierigkeit vor allem in der unternehmensspezifischen Interpretation der allgemein formulierten Normanforderungen liegt. Strebt ein Unternehmen die Zertifizierung nach mehreren Managementsystemnormen an, so eröffnet sich die Möglichkeit zur Integration der Managementsysteme. Allerdings sind auch die Aufgaben der Integration durch verschiedene Herausforderungen gekennzeichnet, die den Bedarf nach einer systematischen Unterstützung verdeutlichen. Im Bereich der Wirtschaftsinformatik haben sich konzeptuelle Modelle als Instrument zur zielorientierten und verständlichen Beschreibung komplexer Informationssysteme etabliert. Entsprechende Modelle können die Durchdringung und Kommunikation komplexer Sachverhalte durch eine zweckmäßige Abstraktion und Strukturierung vereinfachen und eine Überführung in Anwendungssoftware vorbereiten. Für die vorliegende Dissertation leitet sich unter Berücksichtigung dieser Aspekte folgende zentrale Forschungsfrage ab: Wie kann die konzeptuelle Modellierung bei den Aufgaben der Dokumentation und Integration standardisierter Managementsysteme unterstützen? Der Forschungsmethode des Design Science Research folgend, präsentiert die vorliegende Arbeit funktionsspezifische und funktionsunspezifische Artefakte, die bei der Dokumentation standardisierter Managementsysteme und deren Integration modellbasiert unterstützen. Die Anwendbarkeit der Artefakte wird anhand eines realen Anwendungsfalls demonstriert. Die Ausführungen der vorliegenden Arbeit basieren auf einer Analyse der Anforderungen nach ISO 9001 für Qualitätsmanagementsysteme, ISO 14001 für Umweltmanagementsysteme, ISO 50001 für Energiemanagementsysteme, OHSAS 18001 für Arbeitsschutz- und Arbeitssicherheitsmanagementsysteme sowie des durch die Internationale Organisation für Standardisierung veröffentlichten Annex SL.
APA, Harvard, Vancouver, ISO, and other styles
7

Kilianová, Iveta. "Environmentální manažerský systém." Master's thesis, 2006. http://www.nusl.cz/ntk/nusl-94628.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "ISO 14 001 standard"

1

Dening, Tom, and Alisoun Milne. Care homes for older people. Oxford University Press, 2013. http://dx.doi.org/10.1093/med/9780199644957.003.0027.

Full text
Abstract:
Although only 5% of the total over 65 population in developed countries lives in a care home, the lifetime risk of needing residential care is considerable. In the UK, 418 000 older people occupy nearly 12 000 care homes; the sector has a total value of around £14 billion. Care home residents tend to be very old, most are women, and most have complex co-morbid needs. Most people enter a care home because they can no longer live independently due to ill health, notably dementia. Dementia affects over two thirds of all residents; physical disability and functional impairment are also common. Behavioural disturbance is common as is depression. There are concerns about excessive reliance on medication, and more emphasis recently has been placed on improving standards of care. Evidence suggests that training and good leadership is effective. With the ageing population, the provision and the funding of care home places will come under increasing pressure. The solutions to this are yet to be determined.
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "ISO 14 001 standard"

1

"A Systems Approach." In ISO 9000 Quality Systems Handbook - updated for the ISO 9001:2008 standard, 123–48. Routledge, 2009. http://dx.doi.org/10.4324/9780080958033-14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

"What are the costs involved in an organisation obtaining Registration to this standard?" In ISO 9001:2008 for Small Businesses, 569–82. Routledge, 2014. http://dx.doi.org/10.4324/9781315890067-14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Vosper, Helen. "Chapter 14 Adopting the International Standard ‘Becoming a Human-centred Organization (ISO 27500)’ Supports a Strategic Approach to Internationalisation." In Innovations in Higher Education Teaching and Learning, 233–49. Emerald Publishing Limited, 2019. http://dx.doi.org/10.1108/s2055-364120190000016018.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

"faculty. Follow-up univariate F tests revealed 14 items that differed significantly at the 0.05 level using the Scheffé test. For a number of the items, it appears that there is statistical significance and not necessarily meaningful differences. For ex-ample, the item concerning taking a test for another student was rated 3.97 and 3.84 by students and faculty, respectively, yet was different in statistical signifi-cance. Of the items that are significantly different, 3 stand out as being meaning-ful. Items pertaining to studying from old versions of exams and having the instructors manual that contains test items were rated more severe by students (Ms = 2.75 and 3.53, respectively) than faculty (Ms = 1.64 and 2.91, respectively), whereas faculty rated collaborating on work that was supposed to be done individ-ually as more severe (M = 3.05) than did students (M = 2.70). A broad definition of perceived prevalence of cheating was established by ask-ing faculty and students to rate the percentage of students they believed cheat using a Likert scale with 1 being 0% and 10 being 90% to 100%. Faculty perceived that between 0% to 10% of students cheat (M = 1.89), whereas students perceived be-tween 10% to 20% of students cheat (M = 2.32), a difference that is significant, i(271) = 4.27, p<. 001. Table 1 presents the perceived prevalence results using a narrow definition of the term based on the 40 academically dishonest items. As can be seen from Table 1, both faculty and students perceive that the prevalence of cheating is quite low, with most item ratings having means below 2.00, indicating that 1 % to 10% of stu-dents are perceived as engaging in the behaviors. The behaviors perceived to be most prevalent by faculty were students using old tests without permission, whereas students perceived changing words slightly from an original source as the most prevalent. Although the perception of these behaviors is relatively low, there is greater variance (standard deviations typically above 1.0) in the ratings of per-ceived prevalence when compared to the severity ratings. In general, students have greater variance than faculty in their perceived prevalence ratings. A MANO VA was computed to determine whether significant differences ex-isted between student and faculty ratings of perceived prevalence. Results re-vealed a significant MANO VA, Wilks's A = .70, F(40, 247) = 2.69, p < .001. Follow-up univariate F tests revealed 23 items that differed significantly at the .05 level. Students had higher perceived prevalence ratings on 22 of the 23 items, with faculty rating the use of old tests without permission as more prevalent than stu-dents. Similar to the results regarding severity ratings, many of the significant dif-ferences obtained on perceived prevalence ratings, although statistically significant, do not appear to be meaningful differences. For example, although the item concerning using unauthorized materials such as crib notes is statistically sig-nificant with a student mean of 1.55 and a faculty mean of 1.34, this difference is not a meaningful one." In Academic Dishonesty, 81–85. Psychology Press, 2003. http://dx.doi.org/10.4324/9781410608277-14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Becker, Richard C., and Frederick A. Spencer. "Combination Pharmacotherapy." In Fibrinolytic and Antithrombotic Therapy. Oxford University Press, 2006. http://dx.doi.org/10.1093/oso/9780195155648.003.0017.

Full text
Abstract:
The goal of improving coronary arterial patency, microcirculatory blood flow, and myocardial perfusion represents the essence of fibrinolytic–adjunctive therapy combinations. Because fibrinolytic resistance, patency without perfusion, and reocclusion are platelet-mediated phenomena, considerable emphasis has been placed on the development of platelet antagonists. Coronary arterial thrombi consist of platelets and fibrin bound in a tightly packed meshwork. Platelets modify the intrinsic properties of the fibrin network, causing changes in permeability and vasoelasticity, which decrease fibrinolysis rates. The addition of aspirin and the glycoprotein (GP) IIb/IIIa receptor antagonist abciximab modulates the interaction of platelets and fibrin, improving both accessibility to fibrinolytics and the overall rates of fibrinolysis (Collet et al., 2001). The Thrombolysis in Myocardial Infarction (TIMI) 14 trial (Antman et al., 1999) randomized 888 patients with ST-segment elevation myocardial infarction (MI) to receive (1) accelerated tissue plasminogen activator (tPA; ≤100 mg) plus standard dose of unfractionated heparin (UFH); (2) tPA (920 mg bolus) plus abciximab (0.25 mg/kg bolus, 7 μg/min); (3) streptokinase (800,000 to 1.5 million units) and low-dose UFH; or (4) abciximab plus low-dose UFH. TIMI 3 flow rates 90 minutes from treatment initiation were 52%, 53%, 42%, and 32%, respectively. In subsequent dose/strategy studies, a combination of tPA (35 mg) plus abciximab and tPA (15 mg bolus, 31 mg over 60 minutes) plus abciximab revealed 63% and 73% TIMI 3 flow rates, respectively. Rates of major hemorrhage were similar in all tPA treatment groups. The Strategies for Patency Enhancement in the Emergency Department (SPEED) trial (SPEED Group, 2000) included two phases. Phase A (n = 241) randomized patients to receive either abciximab (bolus plus infusion) alone or combined with 5 U, 7.5 U, 10 U, 5 U + 2.5 U, or 5U + 5 U of reteplase. Phase B tested the best strategy from phase A (abciximab plus 5 U + 5 U of reteplase) against 10 U + 10 U of reteplase. In phase A, 62% of the abciximab–reteplase 5 U + 5 U patient group had TIMI 3 flow rates at 60 to 90 minutes vs. 27% of those given abciximab alone (p = .001).
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "ISO 14 001 standard"

1

Liu, Zheng, Gustavo Monte, and Victor Huang. "ISO/IEC/IEEE P21451-001 standard for signal treatment of sensory data." In 2016 IEEE 25th International Symposium on Industrial Electronics (ISIE). IEEE, 2016. http://dx.doi.org/10.1109/isie.2016.7744986.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kirkemo, Finn, Per Osen, Erling Katla, Anthony Muff, Arve Tvitekkja, and Hussain Hashemizadeh. "New Edition of the NORSOK U-001 for Subsea Production Systems." In ASME 2016 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/pvp2016-63554.

Full text
Abstract:
NORSOK U-001 4th edition was released October 1st, 2015. It replaces edition 3 from 2002. The 4th edition is based on industry experience and use of the previous version. With focus on Norwegian Continental Shelf (NCS) operations and experience, NORSOK U-001 provides normative reference and amendments to selected parts of ISO 13628 (equivalent to API 17 series). The focus areas of this paper are the informative annexes to NORSOK U-001: The revised Annex A (informative), and the new Annex B (informative). These annexes provide NCS related amendments to Part 4 (API 17D), Part 7 (API 17G), and Part 15 (API 17P) of ISO 13628. Annex A (informative) provides loads for design and selection of subsea trees, wellheads and templates and has been completely revised with new standard design loads. Annex B (informative) gives recommendations for structural design, manufacture and testing of subsea wellhead and tree equipment (ISO 13628-4/API 17D) and completion/workover riser systems (ISO 13628-7/API 17G). This paper provides a brief introduction and background to Annex A and Annex B. Some differences between NORSOK U-001 Annex B, ISO 13628-7 (API 17G), ISO 10423 (API 6A), API 6X, ISO 13628-4 (API 17D), ASME VIII Div. 3 and ASME VIII Div.2 are also highlighted.
APA, Harvard, Vancouver, ISO, and other styles
3

Horn, Agnes Marie, Erling Østby, Per Olav Moslet, and Mons Hauge. "The Fracture Resistance Approach in Order to Prevent Brittle Failure of Offshore Structures Under Arctic Environments." In ASME 2016 35th International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/omae2016-54341.

Full text
Abstract:
This paper is concerned with the challenges related to steel design under Arctic conditions where both loading and temperature have been discussed in relation to material requirements. Today there is a lack of rules and standards for selecting steel materials for bulk engineering for a lower design temperature than −10°C (NORSOK N-004 [1] allows down to −14°C). Both ISO 19902 Steel Structures [2] and NORSOK N-004 Design of steel structures make reference to EN10225 “Weldable structural steels for fixed offshore structures technical delivery conditions [5]” where steel materials are Charpy tested at a lowest test temperature of −40°C and proven for a design of −10°C. Hence, one major challenge for designers are to specify adequate toughness requirements at an early stage of the design process for low temperature applications. Both NORSOK N-004[1] and ISO 19902[2] provide requirements to load combinations that need to be fulfilled, however the relationship between various load types and temperature is not mentioned in any of these standards. Thus, in the design stage the material needs to demonstrate adequate toughness where loading and temperature are treated independently. For the offshore industry, the main question is the balance between materials requirements and cost-effective solutions, and how to address this within an overall design perspective in order to avoid brittle failure. This paper discusses some of these challenges with the aim of starting a focused process leading up to a clear interpretation of the implications of overall design philosophies, necessary in order to define consistent materials requirements ensuring that brittle fracture is not going to represent a significant threat to the structural integrity. The material recommendations provided in the paper are based on the latest research results from the Arctic Materials project (2008–2017) managed by SINTEF and supported by the industry.
APA, Harvard, Vancouver, ISO, and other styles
4

Mazarel, Adrian. "THE IMPACT OF THE ISO 22000: 2005 STANDARD ON FOOD SAFETY IN THE ROMANIAN HOSPITALITY INDUSTRY." In 4th International Multidisciplinary Scientific Conference on Social Sciences and Arts SGEM2017. Stef92 Technology, 2017. http://dx.doi.org/10.5593/sgemsocial2017/14/s04.106.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Dazer, Martin, Dennis Hügle, Bernd Bertsche, Maik Messner, Eberhard Beck, and Heinrich Mödden. "Evaluation of Upgrading Options for Single-channel Mechatronic Safety Functions into Category 2 Structure According to ISO 13849 based on Standard PLC’s." In Proceedings of the 29th European Safety and Reliability Conference (ESREL). Singapore: Research Publishing Services, 2020. http://dx.doi.org/10.3850/978-981-14-8593-0_3657-cd.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kashiwagi, Makoto, Mike Garamszeghy, Bertrand Lantès, Sébastien Bonne, Lucien Pillette-Cousin, Jose Luis Leganes, Ben Volmert, and David W. James. "ISO Standardization of Theoretical Activity Evaluation Method for Low and Intermediate Level Activated Waste Generated at Nuclear Power Plants." In ASME 2013 15th International Conference on Environmental Remediation and Radioactive Waste Management. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/icem2013-96025.

Full text
Abstract:
Disposal of low- and intermediate-level activated waste generated at nuclear power plants is being planned or carried out in many countries. The radioactivity concentrations and/or total quantities of long-lived, difficult-to-measure nuclides (DTM nuclides), such as C-14, Ni-63, Nb-94, α emitting nuclides etc., are often restricted by the safety case for a final repository as determined by each country’s safety regulations, and these concentrations or amounts are required to be known and declared. With respect to waste contaminated by contact with process water, the Scaling Factor method (SF method), which is empirically based on sampling and analysis data, has been applied as an important method for determining concentrations of DTM nuclides. This method was standardized by the International Organization for Standardization (ISO) and published in 2007 as ISO21238 “Scaling factor method to determine the radioactivity of low- and intermediate-level radioactive waste packages generated at nuclear power plants”. However, for activated metal waste with comparatively high concentrations of radioactivity, such as may be found in reactor control rods and internal structures, direct sampling and radiochemical analysis methods to evaluate the DTM nuclides are limited by access to the material and potentially high personnel radiation exposure. In this case, theoretical calculation methods in combination with empirical methods based on remote radiation surveys need to be used to best advantage for determining the disposal inventory of DTM nuclides while minimizing exposure to radiation workers. Pursuant to this objective a standard for the theoretical evaluation of the radioactivity concentration of DTM nuclides in activated waste, is in process through ISO TC85/SC5 (ISO Technical Committee 85: Nuclear energy, nuclear technologies, and radiological protection; Subcommittee 5: Nuclear fuel cycle). The project team for this ISO standard was formed in 2011 and is composed of experts from 11 countries. The project team has been conducting technical discussions on theoretical methods for determining concentrations of radioactivity, and has developed the draft International Standard of ISO16966 “Theoretical activation calculation method to evaluate the radioactivity of activated waste generated at nuclear reactors”. This paper describes the international standardization process developed by the ISO project team, and outlines the following two theoretical activity evaluation methods: — Point method — Range method
APA, Harvard, Vancouver, ISO, and other styles
7

Kashiwagi, Makoto, Hideki Masui, Yasutaka Denda, David James, Bertrand Lante`s, Wolfgang Mu¨ller, Mike Garamszeghy, Jose Luis Leganes, Harald Maxeiner, and Leo van Velzen. "ISO Standardization of the Scaling Factor Method for Low- and Intermediate Level Radioactive Wastes Generated at Nuclear Power Plants." In The 11th International Conference on Environmental Remediation and Radioactive Waste Management. ASMEDC, 2007. http://dx.doi.org/10.1115/icem2007-7015.

Full text
Abstract:
Low- and intermediate-level radioactive wastes (L-ILW) generated at nuclear power plants are disposed of in various countries. In the disposal of such wastes, it is required that the radioactivity concentrations of waste packages should be declared with respect to difficult-to-measure nuclides (DTM nuclides), such as C-14, Ni-63 and α-emitting nuclides, which are often limited to maximum values in disposal licenses, safety cases and/or regulations for maximum radioactive concentrations. To fulfill this requirement, the Scaling Factor method (SF method) has been applied in various countries as a principal method for determining the concentrations of DTM nuclides. In the SF method, the concentrations of DTM nuclides are determined by multiplying the concentrations of certain key nuclides by SF values (the determined ratios of radioactive concentration between DTM nuclides and those key nuclides). The SF values used as conversion factors are determined from the correlation between DTM nuclides and key nuclides such as Co-60. The concentrations of key nuclides are determined by γ ray measurements which can be made comparatively easily from outside the waste package. The SF values are calculated based on the data obtained from the radiochemical analysis of waste samples. The use of SFs, which are empirically based on analytical data, has become established as a widely recognized “de facto standard”. A number of countries have independently collected nuclide data by analysis over many years and each has developed its own SF method, but all the SF methods that have been adopted are similar. The project team for standardization had been organized for establishing this SF method as a “de jure standard” in the international standardization system of the International Organization for Standardization (ISO). The project team for standardization has advanced the standardization through technical studies, based upon each country’s study results and analysis data. The conclusions reached by the project team was published as ISO International Standard 21238:2007 “The Scaling Factor method to determine the radioactivity of low- and intermediate-level radioactive waste packages generated at nuclear power plants” [1]. This paper gives an introduction to the international standardization process for the SF method and the contents of the recently published International Standard.
APA, Harvard, Vancouver, ISO, and other styles
8

Reiss, Frank, Timothy Griffin, and Karl Reyser. "The ALSTOM GT13E2 Medium BTU Gas Turbine." In ASME Turbo Expo 2002: Power for Land, Sea, and Air. ASMEDC, 2002. http://dx.doi.org/10.1115/gt2002-30108.

Full text
Abstract:
ALSTOM Power’s GT13E2 gas turbine has been successfully commissioned in a refinery residual oil gasification process (api Energia, Italy) operating on Medium Btu gas (GT13E2-MBtu). The modification of the standard GT13E2 to operate with MBtu fuel has resulted in an improvement in the performance of the GT13E2 to exceed 192 MW and 38% efficiency (simple cycle) at ISO conditions. The GT compressor has been upgraded to incorporate an extra-end stage to boost the pressure ratio to 17:1 and improve performance. Syngas from residual oil gasification has a typical volumetric composition of 45% H2, 48% CO and 7% CO2 and a lower heating value of 13.9 MJ/kg. This syngas has been diluted with N2 to reduce the heating value to 7 MJ/kg lowering reactivity and allowing partially premixed operation. In order to operate with syngas a redesign of the standard EV burners was necessary to deal with the associated high flame velocities and volume fluxes. The fuel injection for syngas operation was placed at the burner end and the gas injected radially inward to obtain inherently safe operation. The gas turbine demonstrated successful operation with both syngas and oil No. 2 fuels. At the standard dilution of 7MJ/kg NOx emissions are in the 20–25 vppm range and the CO emissions are below 5 vppm independent of load. The modified burners demonstrated safe operation on syngas with and without dilution of nitrogen in a tested LHV range from 6.8 to 14 MJ/kg. This behavior allows high flexibility of the entire power plant. Changeover from oil no. 2 to syngas and vice versa can be done between 50 and 100% load. The gas turbine components have been inspected several times during the commissioning period and shown to be in good condition.
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'ISO 14 001 standard' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography