Academic literature on the topic 'Injection dynamics'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Injection dynamics.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Injection dynamics"
Yao, Xigui, Zhendong Zhang, Xiangdong Kong, and Congbo Yin. "Dynamic Response Analysis and Structure Optimization of GDI Injector based on Mathematical Model." International Journal of Reliability, Quality and Safety Engineering 25, no. 02 (March 6, 2018): 1850008. http://dx.doi.org/10.1142/s0218539318500080.
Full textPerini, Federico, Stephen Busch, and Rolf Deneys Reitz. "A phenomenological rate of injection model for predicting fuel injection with application to mixture formation in light-duty diesel engines." Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 234, no. 7 (January 31, 2020): 1826–39. http://dx.doi.org/10.1177/0954407019898062.
Full textFerrari, Alessandro, and Pietro Pizzo. "Fully predictive Common Rail fuel injection apparatus model and its application to global system dynamics analyses." International Journal of Engine Research 18, no. 3 (July 28, 2016): 273–90. http://dx.doi.org/10.1177/1468087416653246.
Full textGe, Haiwen, Jaclyn E. Johnson, Hari Krishnamoorthy, Seong-Young Lee, Jeffrey D. Naber, Nan Robarge, and Eric Kurtz. "A comparison of computational fluid dynamics predicted initial liquid penetration using rate of injection profiles generated using two different measurement techniques." International Journal of Engine Research 20, no. 2 (December 15, 2017): 226–35. http://dx.doi.org/10.1177/1468087417746475.
Full textAksamit, Nikolas O., Ben Kravitz, Douglas G. MacMartin, and George Haller. "Harnessing stratospheric diffusion barriers for enhanced climate geoengineering." Atmospheric Chemistry and Physics 21, no. 11 (June 11, 2021): 8845–61. http://dx.doi.org/10.5194/acp-21-8845-2021.
Full textAghaie Meybodi, Mohamad, Rohit Saini, Amirfarhang Mehdizadeh, and Reza Hejazi. "Computational Fluid Dynamics (CFD)-Based Optimization of Injection Process during Endoscopic Mucosal Therapy." Bioengineering 7, no. 4 (October 27, 2020): 136. http://dx.doi.org/10.3390/bioengineering7040136.
Full textShatrov, Mikhail, Leonid Golubkov, Andrey Dunin, Andrey Yakovenko, and Pavel Dushkin. "Influence of high injection pressure on fuel injection perfomances and diesel engine worcking process." Thermal Science 19, no. 6 (2015): 2245–53. http://dx.doi.org/10.2298/tsci151109192s.
Full textBensalem, Chafik, Abdallah Benarous, and Pierre-Olivier Logerais. "Numerical analysis of the flow dynamics of an N2 cryogenic jet." Thermal Science, no. 00 (2020): 162. http://dx.doi.org/10.2298/tsci190805162b.
Full textGu, F., and A. D. Ball. "Diesel Injector Dynamic Modelling and Estimation of Injection Parameters from Impact Response Part 1: Modelling and Analysis of Injector Impacts." Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 210, no. 4 (October 1996): 293–302. http://dx.doi.org/10.1243/pime_proc_1996_210_276_02.
Full textYAN, YONG-HONG, CHANG-QIN WU, and BAO-WEN LI. "BIPOLARON DYNAMICS IN NON-DEGENERATE POLYMERS." International Journal of Modern Physics B 21, no. 23n24 (September 30, 2007): 4190–95. http://dx.doi.org/10.1142/s0217979207045396.
Full textDissertations / Theses on the topic "Injection dynamics"
Conley, Nancy Ann. "The dynamics of cavity pressure in thermoplastic injection molding /." Thesis, McGill University, 1985. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=65924.
Full textHudgins, Duane Edward. "Suppression of premixed combustion dynamics utilizing microjet air injection." Thesis, Massachusetts Institute of Technology, 2008. http://hdl.handle.net/1721.1/45213.
Full textIncludes bibliographical references (leaves 119-123).
The problem of thermoacoustic instability in continuous combustion systems is a major challenge in the field of propulsion and power generation. With the current environmental and political pressure that is being placed on the consumption of fossil fuels, this subject has become even more critical. In the past, the presence of combustion instability could be avoided by designing a combustor with fixed inlet conditions, where these conditions were conducive to a stable system. Today, utilities and providers of propulsion systems are under pressure to make systems that are not only more efficient and clean, but also have a greater flexibility of input fuel. In order to accomplish this, combustion engineers need an even deeper insight into what causes thermoacoustic instability and they need a wider array of tools at their disposal to suppress these instabilities. This thesis adds pieces of that deeper insight and provides another tool to tackle this difficult problem. As a first step in the further understanding of thermoacoustic instabilities, experiments were done in a premixed gas backwards facing step combustor using propane or propane/hydrogen mixture as a fuel. I fully characterized the combustion dynamics in this combustor by measuring the four defining states of the system. These states are pressure, heat release, velocity, and equivalence ratio. Once these measurements were performed I tested two novel approaches to suppressing thermoacoustic instabilities through the use of microjet air injection. This was done by building upon a previous combustor setup to allow the installation of several new diagnostic capabilities and the new microjets.
(cont.) The new diagnostics include stand-off pressure sensors to measure pressure in the hot exhaust region, a hot wire anemometer to measure velocity, a photomultiplier tube to measure the integrated heat release, an automated gas probe to measure fuel concentration profiles, and a laser absorption sensor to measure the temporal variance in equivalence ratio. The novel microjets were built into the newly designed test section. By fully characterizing the system I was able to show how both equivalence ratio oscillations and wake vortex interactions drive the thermoacoustic instabilities of the combustion. I have also shown that the stability range shifts to leaner equivalence ratios as inlet temperature or hydrogen content in the fuel is increased. This thesis demonstrates the great potential the microjet air injection has for extending the range of stability of the system.
by Duane Edward Hudgins.
S.M.
Chlouverakis, Konstantinos E. "Theory of dynamics of semiconductor lasers subject to optical injection." Thesis, University of Essex, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.413642.
Full textPina, Estany Jordi. "Micro and nanostructures replication via injection moulding." Doctoral thesis, Universitat Ramon Llull, 2018. http://hdl.handle.net/10803/663803.
Full textDesde el descubrimiento del poliestireno y el PVC a principios del siglo XX, los plásticos han revolucionado nuestro día a día. Las 250 millones de toneladas que se fabrican cada año se utilizan en un ámplio abanico de aplicaciones como los embalajes, la construcción, los transportes, la medicina, la electrónica, etc. De una forma parecida, se prevé que la llegada de la nanotecnología sea un cambio disruptivo del siglo XXI. Desde que la nanotecnología nació como ciencia en los años 80, han aparecido distintas aplicaciones en distintos sectores como los laboratorios en chips, las superfícies autolimpiantes, las superfícies antimicrobios, aplicaciones ópticas, etc. Actualmente, la nanotecnología está saltando desde los centros de investigación a la industria. Para conseguir este salto, el plástico parece ser un material adecuado debido a su bajo coste, fácil fabricación y propiedades interesantes como su alta resistencia aún y su bajo peso, la resistencia a la corrosión, la transparencia, etc. Esta tesis estudia en detalle como la inyección de plástico se puede usar para fabricar piezas de plástico con zonas nanoestructuradas. La dinámica de fluidos computacional y la dinámica molecular se utilizan para cuantificar los parámetros de proceso y geométricos que afectan a la replicación. Desde el punto de vista experimental y en un trabajo conjunto entre IQS (Universidad Ramon Llull), CSIC y Flubetech, se inyecta plástico en moldes con superfícies nanoestructuradas y se analiza con un microscopio de fuerzas atómica el efecto en la replicación de la temperatura, el tiempo de llenado, la carga de polímero y la geometría de la nanocavidad. Para acabar, SEAT y IQS han unido esfuerzos para desarrollar una aplicación industrial centrada en la mejora de la homogeneidad lumínica mediante el nanotexturizado de una superficie, obteniendo así un método más económico y más eficiente que los métodos usados actualmente en iluminación de faros o pilotos.
Since polystyrene and PVC were discovered at the beginning of the 20th century, plastics have revolutionized our daily lives. The 250 millions of tonnes that are manufactured each year are used in a wide field of applications like packaging, building and construction, transportation, medical, electronics, etc. In a similar way, nanotechnology is called to lead a disruptive change on the 21th century. Since nanotechnology emerged as a science in the 1980s, a wide field of applications has appeared in different areas like lab-on-chips devices, surfaces with self-cleaning capabilities, antimicrobial surfaces, optical applications, etc. Currently, nanotechnology is jumping from the research area to the mass production industry. To do so, plastic appears to be a suitable material for its low cost, easiness to manufacture and interesting properties like high strength-to-weight ratio, durability, corrosion resistance, transparency, etc. This thesis studies in detail how injection moulding manufacturing technique can be used for manufacturing plastic parts with micro and nanostructured areas. Computational Fluid Dynamics and Molecular Dynamics simulation methods are used to quantify the process and geometrical factors that effect the replication. From the experimental point of view, in a common work between IQS (Ramon Llull University), CSIC and Flubetech, plastic is injected in moulds with nanostructured areas and an Atomic Force Microscope is used for quantifying the effect of temperature, filling time, polymer charge and nanoscale geometries in the replication of nanocavities. Finally, SEAT and IQS joined efforts to develop an industrial application consisting into an improve of light homogeneity through the nanotexturising of a surface, obtaining a costs reduction and a better efficiency than the currently used methods for lighting headlamps and rear lights.
Hohl, Angela. "Dynamics of semiconductor laser systems with optical injection and external feedback." Diss., Georgia Institute of Technology, 1995. http://hdl.handle.net/1853/29450.
Full textGomes, Vincent G. (Vincent Gracias). "The dynamics and control of melt temperature in thermoplastic injection molding /." Thesis, McGill University, 1985. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=65921.
Full textGao, Furong. "Measurement, dynamics and control of the mold temperature of injection molding." Thesis, McGill University, 1989. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=62000.
Full textYe, Ming, Raziuddin Khaleel, and Tian-Chyi J. Yeh. "Stochastic analysis of moisture plume dynamics of a field injection experiment." Department of Hydrology and Water Resources, University of Arizona (Tucson, AZ), 2004. http://hdl.handle.net/10150/615750.
Full textDoumbia, Yaya. "Optical injection dynamics and polarization properties of semiconductor lasers frequency combs." Electronic Thesis or Diss., CentraleSupélec, 2021. http://www.theses.fr/2021CSUP0008.
Full textIn this work, we study the nonlinear dynamics of laser diodes optically injected with frequency combs.We first theoretically and experimentally analyze the nonlinear dynamics of edge-emitting lasers (EELs) from an optical injection of frequency combs. The injection parameters and injected comb properties are varied to unveil several locked and unlocked dynamics. For large enough injection strength and over a large detuning range, the injection locking bifurcates to a time-periodic dynamics corresponding to an optical frequency comb that extends the injected comb to a much broader optical spectrum. A bifurcation analysis reveals a cascade harmonic frequency comb dynamics leading to a significant increase in the output comb lines. We have also used the injection parameters, comb properties, and injection current to control the new comb properties. We secondly analyze the nonlinear dynamics and polarization properties in vertical-cavity surface-emitting lasers (VCSELs) subject to orthogonal optical injection with frequency combs experimentally. Most importantly, the VCSEL shows two frequency combs with orthogonal polarization from a single device for some injection parameters. We also demonstrate the possibility to control the single or two polarizations comb repetition rate through harmonic frequency combs generation. We finally present experimentally and theoretically the VCSEL injection dynamics from parallel optical frequency comb injection. We show that the two polarizations combperformance is restricted to high current injection in the case of parallel optical injection. For fixed bias current, the two polarization comb dynamics disappear when increasing the injected comb spacing.This thesis therefore demonstrates besides its interest for nonlinear laser dynamics, optical injection is a technique to harness the comb properties in laser diodes
Pastor, Diego Garcia. "The study of boundary layer control in a turbopump diffuser with fluid injection /." Online version of thesis, 1996. http://hdl.handle.net/1850/12290.
Full textBooks on the topic "Injection dynamics"
Flow injection atomic absorption spectrometry. Chichester: Wiley, 1995.
Find full textAustria) International Seminar "AVL Simulation Tools--Practical Applications" (2011 Graz. AVL simulation tools: Practical applications. Lublin: Politechnika Lubelska, 2012.
Find full textSteffen, Christopher J. Fuel injector design optimization for an annular scramjet geometry. [Cleveland, Ohio: NASA Glenn Research Center, 2003.
Find full textN, Tiwari S., and United States. National Aeronautics and Space Administration., eds. Drag reduction on circular cylinders by ejecting jet from rear stagnation region: Progress report for the period ending June 30, 1997 ... under Cooperative Agreement NCC1-232. Norfolk, Va: Dept. of Mechanical Engineering, College of Engineering and Technology, Old Dominion University, 1997.
Find full textDivision, Rockwell International Rocketdyne, and United States. National Aeronautics and Space Administration., eds. The structural dynamics analysis of the main injector LOX inlet tee and its redesign. [Canoga Park, Calif: Rockwell International, Rocketdyne Division?, 1989.
Find full textSun, Chang Q. Solvation Dynamics: A Notion of Charge Injection. Springer Singapore Pte. Limited, 2020.
Find full textSun, Chang Q. Solvation Dynamics: A Notion of Charge Injection. Springer, 2019.
Find full textKing, John Barry. A study of buoyant backflow in vertical injection lines. 1991.
Find full textKing, John Barry. A study of buoyant backflow in vertical injection lines. 1991.
Find full textCerda, Victor, Laura Ferrer, Jessica Avivar, and Amalia Cerda. Flow Analysis: A Practical Guide. Elsevier Science & Technology Books, 2014.
Find full textBook chapters on the topic "Injection dynamics"
Armbruster, Wolfgang, Justin S. Hardi, and Michael Oschwald. "Experimental Investigation of Injection-Coupled High-Frequency Combustion Instabilities." In Notes on Numerical Fluid Mechanics and Multidisciplinary Design, 249–62. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-53847-7_16.
Full textOtto, Christian. "Quantum Dot Laser Under Optical Injection." In Dynamics of Quantum Dot Lasers, 47–130. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-03786-8_3.
Full textMireault, R., R. Stocker, D. Dunn, and M. Pooladi-Darvish. "Dynamics of Acid Gas Injection Well Operation." In Acid Gas Injection and Related Technologies, 147–64. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2011. http://dx.doi.org/10.1002/9781118094273.ch10.
Full textChekmarev, S. F. "Gas or Isotope Separation by Injection into Light Gas Flow." In Rarefied Gas Dynamics, 1297–304. Boston, MA: Springer US, 1985. http://dx.doi.org/10.1007/978-1-4613-2467-6_61.
Full textOhtsubo, Junji. "Dynamics in Semiconductor Lasers with Optical Injection." In Springer Series in Optical Sciences, 169–204. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-30147-6_6.
Full textOhtsubo, Junji. "Dynamics in Semiconductor Lasers with Optical Injection." In Springer Series in Optical Sciences, 183–225. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-56138-7_6.
Full textSezal, I. H., S. J. Schmidt, G. H. Schnerr, M. Thalhamer, and M. Förster. "Shock and wave dynamics in fuel injection systems." In Shock Waves, 925–30. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-540-85181-3_21.
Full textWang, Jian-Ping, and Ye-Tao Shao. "Rotating Detonation Engine Injection Velocity Limit and Nozzle Effects on Its Propulsion Performance." In Computational Fluid Dynamics 2010, 789–95. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-17884-9_100.
Full textOrtega, Miguel, Abel López-Villa, Guadalupe Juliana Gutiérrez, and Carlos A. Vargas. "Manufacturing of Polymeric Micro-Lenses by Drip Injection." In Fluid Dynamics in Physics, Engineering and Environmental Applications, 513–19. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-27723-8_49.
Full textMattsson, Ken. "Imposing Boundary Conditions with the Injection, the Projection and the Simultaneous Approximation Term Methods." In Computational Fluid Dynamics 2000, 343–48. Berlin, Heidelberg: Springer Berlin Heidelberg, 2001. http://dx.doi.org/10.1007/978-3-642-56535-9_50.
Full textConference papers on the topic "Injection dynamics"
Kashchenko, Igor. "The harmonic injection technique for short-wave HF power amplifier." In 2017 Dynamics of Systems, Mechanisms and Machines (Dynamics). IEEE, 2017. http://dx.doi.org/10.1109/dynamics.2017.8239460.
Full textVAKILI, AHMAD, and CHRISTIAN GAUTHIER. "Control of cavity flow by upstream mass injection." In 22nd Fluid Dynamics, Plasma Dynamics and Lasers Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1991. http://dx.doi.org/10.2514/6.1991-1645.
Full textBorghi, M., M. Milani, and M. Piraccini. "Dynamic Analysis of Diesel Engine Common Rail Injection System: Part I — Injector Dynamics." In ASME 2001 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/imece2001/fpst-25001.
Full textHYDE, C., B. SMITH, J. SCHETZ, and D. WALKER. "Turbulence measurements for heated gas slot injection in supersonic flow." In 20th Fluid Dynamics, Plasma Dynamics and Lasers Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1989. http://dx.doi.org/10.2514/6.1989-1868.
Full textBELL, JAMES, and RABINDRA MEHTA. "Effects of streamwise vorticity injection on turbulent mixing layer development." In 21st Fluid Dynamics, Plasma Dynamics and Lasers Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1990. http://dx.doi.org/10.2514/6.1990-1459.
Full textTsuei, Hsin-Hua, and Charles Merkle. "Mixing and reaction in a combustor with transverse jet injection." In Fluid Dynamics Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1995. http://dx.doi.org/10.2514/6.1995-2171.
Full textVu, Bruce T., Nicholas R. Moss, and Zoe Sampson. "Multi-Phase Modeling of Rainbird Water Injection." In 44th AIAA Fluid Dynamics Conference. Reston, Virginia: American Institute of Aeronautics and Astronautics, 2014. http://dx.doi.org/10.2514/6.2014-3076.
Full textMartens, G., O. Lukyanovych, and I. Filippenko. "Multipayload injection conception." In Progress in Flight Dynamics, Guidance, Navigation, Control, Fault Detection, and Avionics, edited by C. Vallet, D. Choukroun, C. Philippe, G. Balas, A. Nebylov, and O. Yanova. Les Ulis, France: EDP Sciences, 2013. http://dx.doi.org/10.1051/eucass/201306517.
Full textHOLLO, STEVEN, ROY HARTFIELD, JR., and JAMES MCDANIEL. "Injectant mole fraction measurements of transverse injection in constant area supersonic ducts." In 21st Fluid Dynamics, Plasma Dynamics and Lasers Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1990. http://dx.doi.org/10.2514/6.1990-1632.
Full textSasaki, Kenta. "Numerical Simulation of Flow Dynamics for CO2 Injection into Rock Masses." In FLOW DYNAMICS: The Second International Conference on Flow Dynamics. AIP, 2006. http://dx.doi.org/10.1063/1.2204537.
Full textReports on the topic "Injection dynamics"
Chin, Yong Ho. Beam-beam dynamics during the injection process at the PEP-II B-Factory. Office of Scientific and Technical Information (OSTI), October 1991. http://dx.doi.org/10.2172/10106667.
Full textChin, Yong Ho. Beam-beam dynamics during the injection process at the PEP-II B-Factory. Office of Scientific and Technical Information (OSTI), October 1991. http://dx.doi.org/10.2172/6100214.
Full textHuang, Cheng, Rohan Gejji, William Anderson, Changjin Yoon, and Venkateswaran Sankaran. Combustion Dynamics Behavior in a Single-Element Lean Direct Injection (LDI) Gas Turbine Combustor. Fort Belvoir, VA: Defense Technical Information Center, June 2014. http://dx.doi.org/10.21236/ada611210.
Full textDr. Chenn Zhou. Computational Fluid Dynamics (CFD) Modeling for High Rate Pulverized Coal Injection (PCI) into the Blast Furnace. Office of Scientific and Technical Information (OSTI), October 2008. http://dx.doi.org/10.2172/949189.
Full textFrank, Jonathan H., Lyle M. Pickett, Scott E. Bisson, Brian D. Patterson, Adam J. Ruggles, Scott A. Skeen, Julien Luc Manin, Erxiong Huang, Dave J. Cicone, and Panos Sphicas. Quantitative Imaging of Turbulent Mixing Dynamics in High-Pressure Fuel Injection to Enable Predictive Simulations of Engine Combustion. Office of Scientific and Technical Information (OSTI), September 2015. http://dx.doi.org/10.2172/1331503.
Full textFrese, M. H. Dynamics of plasma injection along magnetic field lines in the PBFA II (Particle Beam Fusion Accelerator II) plasma opening switch. Office of Scientific and Technical Information (OSTI), November 1989. http://dx.doi.org/10.2172/7161941.
Full textMitori, T. Flight and Stability of a Laser Inertial Fusion Energy Target in the Drift Region between Injection and the Reaction Chamber with Computational Fluid Dynamics. Office of Scientific and Technical Information (OSTI), December 2013. http://dx.doi.org/10.2172/1116962.
Full textHenestroza, E., and D. Grote. Transient Beam Dynamics in the LBL 2 MV Injector. Office of Scientific and Technical Information (OSTI), December 1999. http://dx.doi.org/10.2172/15013501.
Full textWolfenson, David, William W. Thatcher, and James E. Kinder. Regulation of LH Secretion in the Periovulatory Period as a Strategy to Enhance Ovarian Function and Fertility in Dairy and Beef Cows. United States Department of Agriculture, December 2003. http://dx.doi.org/10.32747/2003.7586458.bard.
Full textWolfenson, David, William W. Thatcher, Rina Meidan, Charles R. Staples, and Israel Flamenbaum. Hormonal and Nutritional Stretegies to Optimize Reproductive Function and Improve Fertility of Dairy Cattle during Heat Stress in Summer. United States Department of Agriculture, August 1994. http://dx.doi.org/10.32747/1994.7568773.bard.
Full text