Relevant bibliographies by topics / Industrial management Environmental aspects Standards Australia

Academic literature on the topic 'Industrial management Environmental aspects Standards Australia'

Author: Grafiati
Published: 10 December 2022
Last updated: 29 January 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Industrial management Environmental aspects Standards Australia.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Industrial management Environmental aspects Standards Australia"

1

Carpenter, Chris. "Life-Extension Project Applies Assessment of Reinforced Concrete to Nonjacket Structures." Journal of Petroleum Technology 73, no. 09 (September 1, 2021): 53–54. http://dx.doi.org/10.2118/0921-0053-jpt.

Full text
Abstract:
This article, written by JPT Technology Editor Chris Carpenter, contains highlights of paper OTC 31250, “Wandoo B: Application of Advanced Reinforced Concrete Assessment for Life Extension for Non-Jacket Structures,” by Robert Sheppard, Spire Engineering; Colin O’Brien, Vermilion Oil and Gas; and Yashar Moslehy, Spire Engineering, et al., prepared for the 2021 Offshore Technology Conference, originally scheduled to be held in Houston, 4–7 May. The paper has not been peer reviewed. Copyright 2021 Offshore Technology Conference. Reproduced by permission. Wandoo B is a concrete gravity-based structure (GBS) and is the main production facility for the Wandoo field offshore northwest Australia. It was installed in 1997 with a design life of 20 years. The structural assessments discussed in this paper are part of a comprehensive life-extension project encompassing wells, subsea systems, marine and safety systems, and topsides facilities and structures to demonstrate fitness for service through the end of field life. Background The GBS serves as the support structure for the Wandoo B facility and provides oil storage for the Wandoo field. The structure has four shafts approximately 11 m in diameter that support the top-sides facilities and a base structure with permanent ballast and oil storage cells (Fig. 1). It was originally developed as an ExxonMobil-led project and now is owned and operated wholly by Vermilion Oil and Gas Australia. The reinforced concrete (RC) shafts and the base top slab are pretensioned. In the shafts, tendons are enclosed in 20 ducts distributed around the circumference. The top of the shafts provides a mating point with the steel topsides structure with the connection formed by embedded anchor bolts in a bulge in the shaft cross section. The topsides structure is a three-level braced steel frame system supporting production operations for 12 well conductors contained within the northeast shaft and three outboard well conductors. Life-Extension Project The facility was designed with a target life of 20 years. The life-extension project was intended not only to satisfy the operator’s responsibility to continue safe operations and adhere to their safety case but also to meet the expectations of the regulator. The structural aspects of the project included four phases, the first two of which are detailed in this synopsis: - Design assessments per latest standards and modifications where required - Ultimate capacity assessments with retrofit modifications where required - Risk studies and workshops to demonstrate that risk is as low as reasonably practicable (ALARP) - Integrity-management manual and inspection plan The first two phases were addressed using the latest condition-assessment, weight, and environmental data available. The phased approach allowed the assessment team to use basic linear approaches to demonstrate code compliance and only use the more-advanced analysis techniques to evaluate the critical components that did not satisfy code or were needed to provide input to the ALARP assessment and establish target reliability for the facility.
APA, Harvard, Vancouver, ISO, and other styles
2

Forsyth, Anthony. "Industrial legislation in Australia in 2016." Journal of Industrial Relations 59, no. 3 (May 22, 2017): 323–39. http://dx.doi.org/10.1177/0022185617693876.

Full text
Abstract:
After three years of trying, the Coalition Government finally succeeded in obtaining passage of several key workplace reform statutes in 2016. This followed the outcome of the federal election held on 2 July, delivering the Government a differently composed Senate and a new opportunity to secure support for its legislative program. This review article explains key aspects of the industrial legislation passed by federal Parliament in 2016, including statutes abolishing the specialist road transport industry tribunal, re-establishing the Howard-era regulator for the construction industry, and setting up a new agency to enforce enhanced governance and accountability standards for registered unions and employer organisations. Legislative amendments aimed at resolving the long-running bargaining dispute in Victoria’s Country Fire Authority are also considered, along with the Government’s muted response to the 2015 Productivity Commission review of the workplace relations framework. The article then examines developments at state level, including a major rewrite of Queensland’s industrial legislation, structural changes in New South Wales, and proposed changes to long service leave and the labour hire sector in Victoria. It concludes by noting the irony that just as the federal Government has tasted some success after a long legislative ‘dry spell’, its labour law reform agenda appears limited and piecemeal.
APA, Harvard, Vancouver, ISO, and other styles
3

Saliba, L. J. "Legal and Administrative Aspects of the Treatment and Discharge of Industrial Wastewaters in the Mediterranean." Water Science and Technology 18, no. 9 (September 1, 1986): 207–19. http://dx.doi.org/10.2166/wst.1986.0092.

Full text
Abstract:
Approximately 80-85% of the total Mediterranean pollution load originates from land-based sources. Industrial wastewater discharges form a significant proportion. National legal and administrative measures vary enormously within the region, and coverage and coordination need improvement, as do waste management and disposal practices. The only legal instrument providing overall regional coverage is the 1980 Protocol for the Protection of the Mediterranean Sea against pollution from Land-based Sources, which only provides the framework for programmes and measures to be progressively developed. In reviewing the situation regarding the treatment and discharge of industrial wastewaters in the Mediterranean, a recent WHO Workshop emphasized the integrated nature of the pollution problem, and stressed that a regional code of practice for industrial waste discharge should form an integral part of an overall pollution control framework. National programmes should be undertaken progressively in ascending order of complexity to ensure cost-effectiveness and capability of enforcement. Treatment and re-use of industrial wastewaters could provide a new water resource. Interim effluent standards should be established until such time as the capability is developed to define local environmental quality criteria, on which firm effluent standards could then be based. The progressive implementation of such measures would help in finally resolving the problem of industrial pollution in the region.
APA, Harvard, Vancouver, ISO, and other styles
4

Criste, Ionel Virgil. "IMPLEMENTING AN INNOVATION MANAGEMENT SYSTEM AT NATIONAL RESEARCH AND DEVELOPMENT INSTITUTE FOR INDUSTRIAL ECOLOGY - ECOIND." Romanian Journal of Ecology & Environmental Chemistry 2, no. 1 (July 31, 2020): 40–46. http://dx.doi.org/10.21698/rjeec.2020.106.

Full text
Abstract:
The paper presents the activities performed for the implementation of the innovation management system integrated into the existing quality, environmental, and occupational health and safety management system of the ECOIND institute. The basic terms used in the project are defined and the international and Romanian standards are explained. The results obtained consist in identifying, introducing and describing the processes related to innovation and establishing the interaction of these processes with the other processes of the management system, establishing the policy and objectives related to innovation, reviewing the system procedures and the quality, environmental and occupational health, and safety management manual to include the innovation processes and elaborating the occupational procedures to keep these processes under control. The paper shows the main benefits of the innovation management system and the impact of this system for NRDI ECOIND in several aspects: technical, technological, economic, social, and environmental.
APA, Harvard, Vancouver, ISO, and other styles
5

Wahjusaputri, Sintha, Faariq Robiith Al Khuwarizmi, and Dwi Priyono. "Online Learning Program Evaluation to Improve the Education Quality in Primary School." AL-ISHLAH: Jurnal Pendidikan 13, no. 3 (October 31, 2021): 1670–79. http://dx.doi.org/10.35445/alishlah.v13i3.659.

Full text
Abstract:
This research aims to measure the effectiveness of online learning programs during the COVID-19 pandemic in improving the quality of education at one of the Islamic School in Jakarta. This study uses a qualitative descriptive method and a discrepancy evaluation model (DEM). The evaluation model was chosen to see the gap between standards and implementation in the field. These aspects include six stages of inequality evaluation, online learning principles, student learning outcomes, and characteristics of the quality of education. School management must always carry out strict supervision and monitoring so that online learning can run smoothly and effectively to minimize the possibility of gaps and achieve all the characteristics contained in the implementation standards. The results of this evaluation relate to the quality of education at Islamic schools.
APA, Harvard, Vancouver, ISO, and other styles
6

Stenis, Jan, and William Hogland. "Guidelines for Practical Application of the EUROPE Model to Improve Production Units’ Resource Efficiency." Open Waste Management Journal 11, no. 1 (November 30, 2018): 41–49. http://dx.doi.org/10.2174/1876400201811010041.

Full text
Abstract:
Introduction & Objective: This paper describes the practical usage of the EUROPE (Efficient Use of Resources for Optimal Production Economy) model based on the equality principle to improve the resource efficiency of production units. Methodology: The EUROPE model is a tool to monitor, manage and evaluate how the economic, technological and environmental performance of a firm or other production unit changes over time. Results & Discussion: A manual for daily use was provided to industrial managers and practical operators in a municipal solid waste firm. The company was able to improve its economic, environmental and technological standards by employing the EUROPE model, which combines relevant aspects of all three standards in a single key performance indicator. The method involves allocating shadow costs to residuals and the technique is demonstrated in the case of a medium-sized Swedish municipal solid waste management firm. Conclusion: The case study indicates that the manual accompanying the model is useful for companies applying the model to industrial activities and solid waste management schemes.
APA, Harvard, Vancouver, ISO, and other styles
7

Tverytnykova, Elena, Yulia Demidova, and Tatyana Drozdova. "MANAGEMENT SYSTEM OF OCCUPATIONAL SAFETY AT UKRAINIAN ENTERPRISES: INTERNATIONAL AND EUROPEAN DIMENSION." Advanced Information Systems 5, no. 1 (June 22, 2021): 45–53. http://dx.doi.org/10.20998/2522-9052.2021.1.06.

Full text
Abstract:
Abstract. The international and European experience in creating and improving integrated systems in the field of occupational safety and health on the basis of research regulatory documents of the International Organization for Standardization, European standards, national standards of Ukraine, industry and methodical documents on management of occupational safety and health of oil and gas complex enterprises is overviewed. The implementation features of OHSAS 18001 and ISO 45001 international standards to create an integrated safety management system of professional activity have been studied. The ways of implementing the analyzed requirements in the industry safety standards of occupational activity of oil and gas complex enterprises of Ukraine are considered. A number of hazardous events related to occupational activity at the enterprises: industrial safety, technogenic safety, labour hygiene and safety, ecological safety, psychophysiological safety has been considered and a generalizing scheme of dangers and hazardous events has been created. A model of an integrated management system for occupational safety activities for oil and gas enterprises is proposed based on the involvement of scientific literature, regulatory documents using the structural-logical method, systematization and generalization, and methods of meaningful and comparative analysis. It is proved that the management system, based on the principles of the cyclical model of quality management by E. Deming should include such aspects as: quality and risk management, environmental management, occupational safety management, social responsibility and power management.
APA, Harvard, Vancouver, ISO, and other styles
8

Sheng, Li Wei, Yu Zhao Feng, Hai Bo Yu, Rong Ji Sun, Peng Fei Li, and Heng Zhang. "Research on Environmental Risk Assessment of Contaminated Sites Reuse." Advanced Materials Research 955-959 (June 2014): 1768–76. http://dx.doi.org/10.4028/www.scientific.net/amr.955-959.1768.

Full text
Abstract:
With the rapid development of industrialization and urbanization in China, many of industrial enterprises have relocated from the original sites, which have produced a large number of contaminated sites. The environmental risk assessment and management must be carried out imminently. This paper analyzes the removal of contaminated sites happened in China currently, and through combing the contaminated sites features and aspects of human health pathways, analyzed environmental risks of contaminated sites recycling. As for the health risk assessment, we focus on data collection, toxicity assessment, exposure assessment and risk characterization. The paper also describes the regulations and technical standards of contaminated sites risk assessment, which is used in our country currently. Finally the paper summarizes the problems and gives suggestions for the risk assessment research of contaminated sites.
APA, Harvard, Vancouver, ISO, and other styles
9

Samarina, Vera, Tatiana Skufina, and Aleksandr Samarin. "The experience of using GRI Standards in sustainable development reports by Russian industrial corporations." E3S Web of Conferences 208 (2020): 07011. http://dx.doi.org/10.1051/e3sconf/202020807011.

Full text
Abstract:
Some moments in the history of the formation of the concept and the modern components of the mechanism of industrial corporations sustainable development, which comprehensively combines the managerial, economic, social and environmental aspects have been presented in the paper. The experience of disclosing information in the field of sustainable development by the largest metallurgical corporations having assets in the Russian Federation has been presented and analyzed as well. The research has shown that using the unified GRI Standards recommendations, management of each corporation independently determines the number and composition of indices required to assess the Triple Bottom Line. It has been concluded that the lack of a unified methodology for disclosing information in the field of achieving sustainable development results does not allow corporations to compare them, since one of the main principles of scientific research, i.e. the principle of results comparability is violated. The following authors’ position is defended: in order to eliminate the reasons that complicate the comparative assessment of the results of sustainable development of industrial corporations, the reporting methodology needs to be improved.
APA, Harvard, Vancouver, ISO, and other styles
10

Sundström, Agneta, Zahra Ahmadi, and Kristina Mickelsson. "Implementing Social Sustainability for Innovative Industrial Work Environments." Sustainability 11, no. 12 (June 20, 2019): 3402. http://dx.doi.org/10.3390/su11123402.

Full text
Abstract:
Industrial companies are in a situation that requires them to reconsider their social sustainability agenda in order to attract new employees. Building upon interviews with CEOs and HR managers in 20 small medium enterprises (SMEs), this study aims to analyze how high-tech companies and industrial engineering companies define and implement social sustainability into business strategies and operations. Data was collected from 20 interviews and secondary information coded for categorical data analysis in SPSS Statistics 22 software. The findings show that although the companies have adopted several kinds of International Organization for Standardization (ISO) standards, social sustainability is still absent from their operational activities and is considered of lower importance than environmental sustainability. Thus, the implementation of social sustainability can be considered symbolic rather substantive. The study also shows differences between the two groups of companies. The high-tech company group pays little attention to social sustainability aspects, instead focusing on product innovation development. While the industrial engineering group has some interest in social sustainability, their focus is primarily on issues linked to health and safety in order to meet increasing demands from supply chain compliance. Neglecting social aspects of sustainability, such as addressing gender equality and diversity, may cause difficulties in attracting a new workforce.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Industrial management Environmental aspects Standards Australia"

1

Wilgenbusch, Brian. "Developing an information management system for an environmental and economic monitoring system." Thesis, Georgia Institute of Technology, 2001. http://hdl.handle.net/1853/17331.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

劉善棠 and Sin-tong William Lau. "Environmentalism, environmental performance standards, and the business sector in Hong Kong: assessing theimpacts of ISO 14000." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2001. http://hub.hku.hk/bib/B29873009.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Larwood, Andrew John. "Cleaner production : promoting and achieving it in the South Australian foundry industry." Title page, table of contents and abstract only, 2000. http://web4.library.adelaide.edu.au/theses/09ENV/09envl336.pdf.

Full text
Abstract:
Bibliography: leaves 123-130. The literature search and the findings from the investigation have been used to provide recommendations for a sector specific cooperative approach using regulation, self-regulation, voluntary agreements, economic incentatives and educational/information strategies to promote and acheive cleaner production in the South Australian foundry industry.
APA, Harvard, Vancouver, ISO, and other styles
4

Huen, Clay. "Would adopting the ISO 14000 make Hong Kong's solid waste management system more sustainable?" Thesis, Hong Kong : University of Hong Kong, 1998. http://sunzi.lib.hku.hk/hkuto/record.jsp?B19945528.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Hall, Sandra. "The contribution of heavy industry and commercial activity at Canning Vale to the loads of nitrogen and phosphorus released in the Bannister Creek catchment area." Thesis, Edith Cowan University, Research Online, Perth, Western Australia, 2007. https://ro.ecu.edu.au/theses/307.

Full text
Abstract:
Stormwater is recognised as a transport mechanism for pollutants. Pollutants enter stormwater drains via surface washoff, subsurface flow or direct discharge. Landuse is reported to affect the quantity of pollutants released into stormwater drains. In Australia, the contribution of nutrients (nitrogen and phosphorus) and surfactants from industrial areas to surface drainage is poorly understood. Previous research has mainly focused on the quality of water leaving residential and agricultural areas. In Western Australia, there is growing concern over the health of the Swan-Canning River system, which is seeing signs of eutrophication. Runoff and discharge from residential, commercial, and industrial areas influence the quality of water in the Swan-Canning River system. A study of nutrient release was undertaken for the eastern sector of the Canning Vale Industrial Area, to determine the contribution of industry to nutrient loads received by the Canning River system, between August 2001 and 2002. Data was collected three times a week using a point sampling regime. Diurnal and storm event variability were also tested. Data collected from the eastern sector of the industrial area was compared to that released from the entire Bannister Creek Catchment area. Nitrogen and phosphorus concentrations downstream of industrial areas have been reported at 45mg L-1 and 15mg L-1 respectively (Thomas et al, 1997; John, 2000). In this study, the median concentrations of nitrogen and phosphorus downstream of industry in Bannister Creek, at the Tom Bateman Reserve Detention Basin, were 1.32mg L-1 and 0.11mg L-1 respectively. Concentrations of nitrogen and phosphorus were not indicative of point source discharge. Nutrient concentrations reported in Bannister Creek in this study, have been consistent with data collected and reported in other studies i.e. Donohue et al, 1992 and Jakowyna, 2002. Nitrogen and phosphorus loads released from the entire Bannister Creek Catchment area, exceeded loads previously reported in other studies i.e. Donohue et al ( 1994); Donohue et al, 1992 and Jakowyna, 2002. An estimated 32890kg of nitrogen and 2085kg of phosphorus was released from Bannister Creek Catchment during the study. Rainfall during the study period was reflective of the drying climate Perth has been experiencing over the last ten years. Nitrogen and phosphorus released from Bannister Creek during the study period are likely to be underestimated, as they do not include the data collected for a significant storm event recorded at Hybanthus Road on the 16.4.02. During this 1- 2/1-5 ARI storm event 1586kg of nitrogen and 185kg of phosphorus were exported from Bannister Creek, producing loads ten times greater than that estimated during the point sampling regime. The later values were used in the calculation of annual loads to maintain consistency between the study sites. Despite the significant load of nutrients released from the catchment on 16.4.02, rainfall was not the main transport mechanism for nitrogen and phosphorus, indicated by the weak correlation e.g. R2 > 0.1. Base flow was determined to be the most significant pathway of nutrient export. The concentrations and loads of nitrogen and phosphorus released from the industrial area were low, but the contribution to catchment loading was important. The rate of nutrient release per unit of area was higher from the eastern sector of the Canning Vale Industrial Area than the entire Bannister Creek Catchment Area. Nitrogen was released at a rate of 4163kg km2 yr from the industrial area and 134 2. 86kg km2 yr for the entire catchment. Phosphorus was the same. From the industrial area it was released at a rate of 397kg km2 yr compared to a rate of 94.2kg km2 yr from the entire Bannister Creek Catchment Area. The study revealed the need to retain nutrients within the catchment. Studies on stormwater management suggest that this can be achieved through Water Sensitive Urban Design and Best Management Practices. Both strategies work on the principle of retaining and recycling nutrients within the catchment area. Work is currently been undertaken to meet the objectives of these two management strategies in Bannister Creek. Work has included the removal of the southwestern bank of the Tom Bateman reserve detention basin to create a meandering wetland, and the downgrading of the banks along Bywood Way, Lynwood to create a Living Stream. Further studies should focus on the effectiveness of these strategies.
APA, Harvard, Vancouver, ISO, and other styles
6

Samuel, Oluranti Sunday. "Environmental and sociological factors as determinants of occupational health and safety of workers in selected small and medium scale enterprises in Lagos State, Nigeria." Thesis, 2016. http://hdl.handle.net/10500/22669.

Full text
Abstract:
Work is an essential activity that provides goods or services of value to oneself and others. Paradoxically, in a bid for self-realisation, workers are seriously endangered. Work-related or induced diseases and stresses pose serious threats to workers’ health and the general well-being, hence, the need to seriously consider the issue of occupational health and safety of workers. In terms of safety at work, the experience of small and medium scale enterprises (SMSEs) worldwide is that of neglect. Their incomes are very low and uncertain, coupled with high levels of risk and hazard in their work, with little or no social protection coverage (Chen, 2008). This study therefore examines how environmental and sociological factors determine occupational health and safety of workers in SMSEs in Lagos State, Nigeria. Ulrich Beck “Risk Society” theory, Political Economy of Health framework (PEH) (Minkler et al 1994, Linnan et al, 2001) and Labour Process Theory (LPT) (Braverman, 1974; Marx, 1976; Bottome, 1991) underpinned the study. The study adopts both the qualitative and quantitative methods of data collection. The qualitative method includes field observation of the selected workplaces, six Focus Group Discussion (FGD) and eight In-depth interviews (IDIs). The quantitative involved the use of structured questionnaire. The sample survey involved 180 respondents in a multi-stage sampling technique from purposively selected sawmills, mechanic villages and blacksmith cottages in three Local Government Areas in Lagos State. The quantitative data analysis uses simple percentile and univariate analyses, while the qualitative data are content-analysed, based on the objectives of the study. The findings identified low level of education (60.5%), and poor awareness of OHS in SMSEs (86.1%). It further reveals poor physical (69.5%) and technological environment (70.5%), unavailability of OHS facilities (60.5%) and prevention methods by manager/owners (60.5%), carefree attitudes of workers/managers/owners to OHS (69.5), non-acquaintance of workers to OHS laws (86.1%), workers’ economic incapacitation to deal with issues of occupational hazard (76.1%), lack of enforcement of OHS (88.3%), and transferring knowledge on OHS (82.2%) in the selected SMSEs. The study recommends roles for managers/owners, workers, trade associations, government, non-governmental organisations to promote effective OHS in the selected SMSEs.
Sociology
D.Phil. (Sociology)
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Industrial management Environmental aspects Standards Australia"

1

Gilbert, Michael J. Achieving environmental standards. 2nd ed. London: Pitman, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kuhre, W. Lee. ISO 14001 certification: Environmental management systems : a practical guide for preparing effective environmental management systems. Upper Saddle River, NJ: Prentice Hall PTR, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Institution, British Standards. Guidelines for environmental auditing: Audit procedures : auditing of environmental management systems. London: BSI, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

David, Hunt. Environmental management systems: Principles and practice. London: McGraw-Hill Book Co., 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Institution, British Standards. Guidelines for environmental auditing: Qualification criteria for environmental auditors. London: BSI, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Institution, British Standards. Guidelines for environmental auditing: General principles. London: BSI, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Mark, Yoxon, ed. Installing environmental management systems: A step-by-step guide. London: Earthscan, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Sheldon, Christopher. Installing environmental management systems: A step-by-step guide. London: Earthscan, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

ISO 14031--environmental performance evaluation (EPE): Practical tools and techniques for conducting an environmental performance evaluation. Upper Saddle River, NJ: Prentice Hall PTR, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Qiquan, Wang, ed. Jian kang, an quan, huan jing guan li ti xi. Beijing Shi: Hua xue gong ye chu ban she, 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources
You might also be interested in the extended bibliographies on the topic 'Industrial management Environmental aspects Standards Australia' for particular source types:
Journal articles Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography