Relevant bibliographies by topics / Industrial and manufacturing processes / Dissertations / Theses

Dissertations / Theses on the topic 'Industrial and manufacturing processes'

To see the other types of publications on this topic, follow the link: Industrial and manufacturing processes.
Author: Grafiati
Published: 10 December 2022
Last updated: 28 January 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'Industrial and manufacturing processes.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Hides, Michael. "New products into manufacturing." Thesis, University of Salford, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.341312.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bose, Prosenjit. "Geometric and computational aspects of manufacturing processes." Thesis, McGill University, 1994. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=28686.

Full text
Abstract:
Two of the fundamental questions that arise in the manufacturing industry concerning every type of manufacturing process are: (1) Given an object, can it be built using a particular process? (2) Given that an object can be built using a particular process, what is the best way to construct the object? The latter question gives rise to many different problems depending on how best is qualified. We address these problems for two complimentary categories of manufacturing processes: rapid prototyping systems and casting processes. The method we use to address these problems is to first define a geometric model of the process in question and then answer the question on that model.
In the category of rapid prototyping systems, we concentrate on stereolithography, which is emerging as one of the most popular rapid prototyping systems. We model stereolithography geometrically and then study the class of objects that admit a construction in this model. For the objects that admit a construction, we find the orientations that allow a construction of the object.
In the category of casting processes, we concentrate on gravity casting and injection molding. We first model the process and its components geometrically. We then characterize and recognize the objects that can be formed using a re-usable two-part cast. Given that a cast of an object can be formed, we determine a suitable location for the pin gate, the point from which liquid is poured or injected into a mold. Finally, we compute an orientation of a mold that ensures a complete fill and minimizes the number of venting holes for molds used in gravity casting processes.
APA, Harvard, Vancouver, ISO, and other styles
3

Ahn, Song-Jun. "The impacts of automation equipment at Chung-Woo Industrial Co., Ltd." Online version, 1998. http://www.uwstout.edu/lib/thesis/1998/1998ahns.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Lofthouse, Victoria Anne. "Facilitating ecodesign in an industrial design context : an exploratory study." Thesis, Cranfield University, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.270755.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Williams, Edward James. "A neural network based approach to fault detection in industrial processes." Thesis, University of Plymouth, 1994. http://hdl.handle.net/10026.1/1743.

Full text
Abstract:
The need for automated fault detection methods has increased in line with the complexity of processing plant technology and their control systems. Fast and accurate fault detection and isolation (FDI) is essential if a controller is to be effective in a supervisory role. This thesis is concerned with developing an FDI system based upon artificial neural network techniques. The artificial neural network (ANN) is a mechanism based upon the concepts of information processing within the brain, and consequently has the ability to self adjust, or learn about a given problem domain. It can thus be utilised in currently favoured model-based FDI systems with the advantage that it can learn process dynamics by being presented examples of process input-output pairs without the need for traditional mathematically complex models. Similarly, ANNs can be taught to classify characteristics in the residual (or plant-model difference) signal without the necessity of constructing the types of filter used in more classical solutions. Initially, a class of feedforward neural network called the multilayer perceptron (MLP) is used to model mathematically simulated linear and nonlinear plants in order to demonstrate their abilities in this field, as well as investigating the consequence of parameter variation on model effectiveness and how the model can be utilised in a model-based FDI system. A principle aim of this research is to demonstrate the ability of the system to work online and in real-time on genuine industrial processes, and the plant nominated as a test bed - the Unilever Automated Freezer (UAF) - is introduced. The UAF, being a time-varying system, requires a novel system identification approach which has resulted in a number of cascaded MLPs to model the various stages in the phased startup of the process. In order to reduce model mismatch to a minimum, it was necessary to develop an effective switching mechanism between one MLP in the cascade and the next. Attempts using a rule-based switching mechanism, a simple MLP switch and an error based switching mechanism were made, before a solution incorporating a genetic algorithm and an MLP network was developed which had the capability of learning the optimum switching points. After the successful development of the model, a series of MLPs were trained to recognise the characteristics of a number of faults within the residual signals. Problems involving false alarms between certain faults were reduced by the introduction of templates - or information pertaining to when a particular fault was most evident in the residuals. The final solution consisting of an MLP Cascade model and fault isolation MLPs is essentially generic for this class of time-varying system, and the results achieved on the UAF were far superior to those of the currently used FDI system without the need for any extra sensory information. The MLP Cascade and associated switching device together with the development of an online real-time FDI system for a time-varying piece of industrial machinery, are deemed to be original contributions to knowledge.
APA, Harvard, Vancouver, ISO, and other styles
6

Menon, U. "A multi-objective production planning framework for automated manufacturing systems." Thesis, University of Nottingham, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.356077.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kamtekar, Darshana M. "Implementation of functional safety in a robotic manufacturing cell using IEC 61508 standard and Siemens technology /." Online version of thesis, 2009. http://hdl.handle.net/1850/11174.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Small, Caroline Armentha. "A study of the use of modelling in manufacturing change projects." Thesis, University of Derby, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.326176.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Owen, John J. IIII. "Economic evaluation and justification of industrial automation." Diss., Georgia Institute of Technology, 1993. http://hdl.handle.net/1853/24539.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Wahid, Zaharah. "Potential for process improvement of the rubber glove manufacturing process : an industrial case study." Thesis, University of Newcastle Upon Tyne, 1998. http://hdl.handle.net/10443/792.

Full text
Abstract:
Coagulant dipping constitutes an important part of the rubber glove manufacturing process. Its operation is affected by many variables which dictates the quality of the finished product. Therefore, investigating the controllable factors affecting the quality of the product and process in the presence of noise factors for process improvement is the primary aim of this study. Robust process design for off-line quality control has received much attention in the literature. Application of this design in the rubber examination glove industry as an alternative solution for potential competitive advantage was investigated. The robust design problem is defined in terms of design objectives, controllable factors and noise factors. In this thesis we combined both controllable and noise factors as a single experimental set-up. An L16 orthogonal array was used as it would allow the evaluation of the eight main factors chosen and some of their interactions. The use of fractional factorial reduces the number of runs required. Physical experiments were conducted in the glove manufacturing plant for the case problem. Effects of experimental errors, model assumptions, the experimental design and modelling approaches on the results are discussed. Models capable of predicting the response performance of the process under study are developed and investigated. Experience learnt from the implementation of quality improvement which are human related factors are also addressed in this thesis. From this study we gained a better understanding of the rubber glove manufacturing process. We are therefore in a better position to see what levels of the independent factors will lead to acceptable response values and acceptable variability. This approach allows us to make appropriate compromises between a target value for the response of interest and resulting variance. The additional knowledge were not known before. It could be used as an advantage for the glove manufacturers to better control their processes. The enormous potential benefits that could be reaped from the information gained about the process quantify the efforts for improvements.
APA, Harvard, Vancouver, ISO, and other styles
11

Bagshaw, M. J. "A study of steady state casting processes." Thesis, University of Oxford, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.376872.

Full text
APA, Harvard, Vancouver, ISO, and other styles
12

Nanayakkara, Julian F. "Effects of operating characteristics on work-in-progress in batch manufacturing systems." Thesis, University of Strathclyde, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.482967.

Full text
APA, Harvard, Vancouver, ISO, and other styles
13

Lau, C. C. "Development and assessment of a reactive simulation-based manufacturing planning and control system." Thesis, Queen's University Belfast, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.269057.

Full text
APA, Harvard, Vancouver, ISO, and other styles
14

Leung, Wai-man Wanthy. "Evolutionary optimisation of industrial systems /." Hong Kong : University of Hong Kong, 1999. http://sunzi.lib.hku.hk/hkuto/record.jsp?B2132668X.

Full text
APA, Harvard, Vancouver, ISO, and other styles
15

Peplinski, Jesse D. "Design for manufacture at the function level of abstraction." Thesis, Georgia Institute of Technology, 1994. http://hdl.handle.net/1853/18196.

Full text
APA, Harvard, Vancouver, ISO, and other styles
16

Corden, Thomas Joseph. "Development of design and manufacturing techniques for glass reinforced plastic waste water treatment equipment." Thesis, University of Nottingham, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.339665.

Full text
APA, Harvard, Vancouver, ISO, and other styles
17

Guo, Huairui. "Variation monitoring, diagnosis and control for complex solar cell manufacturing processes." Diss., The University of Arizona, 2004. http://hdl.handle.net/10150/280704.

Full text
Abstract:
Interest in photovoltaic products has expanded dramatically, but wide-scale commercial use remains limited due to the high manufacturing cost and insufficient efficiency of solar products. Therefore, it is critical to develop effective process monitoring, diagnosing, and control methods for quality and productivity improvement. This dissertation is motivated by this timely need to develop effective process control methods for variation reduction in thin film solar cell manufacturing processes. Three fundamental research issues related to process monitoring, diagnosis, and control have been studied accordingly. The major research activities and the corresponding contributions are summarized as follows: (1) Online SPC is integrated with generalized predictive control (GPC) for the first time for effective process monitoring and control. This research emphasizes on the importance of developing supervisory strategies, in which the controller parameters are adaptively changed based on the detection of different process change patterns using SPC techniques. It has been shown that the integration of SPC and GPC provides great potential for the development of effective controllers especially for a complex manufacturing process with a large time varying delay and different process change patterns. (2) A generic hierarchical ANOVA method is developed for systematic variation decomposition and diagnosis in batch manufacturing processes. Different from SPC, which focuses on variation reduction due to assignable causes, this research aims to reduce inherent normal process variation by assessing and diagnosing inherent variance components from production data. A systematic method of how to use a full factor decomposition model to systematically determine an appropriate nested model structure is investigated for the first time in this dissertation. (3) A Multiscale statistical process monitoring method is proposed for the first time to simultaneously detect mean shift and variance change for autocorrelated data. Three wavelet-based monitoring charts are developed to separately detect process variance change, measurement error variance change, and process mean shift simultaneously. Although the solar cell manufacturing process is used as an example in the dissertation, the developed methodologies are generic for process monitoring, diagnosis, and control in process variation reduction, which are expected to be applicable to various other semiconductor and chemical manufacturing processes.
APA, Harvard, Vancouver, ISO, and other styles
18

Rashid, Haroon. "Butt fusion welding of polyethylene pipes." Thesis, Brunel University, 1997. http://bura.brunel.ac.uk/handle/2438/6623.

Full text
Abstract:
The butt fusion process is extensively used in the joining of polyethylene (PE) pipes by the water and gas industries. This welding process although deceptively simple, is rather poorly understood, with much of the initial developments being of a rather empirical nature. The Water Research centre (WRc) have funded the present research in an attempt to optimise the welding of high pressure pipeline (PE100) systems. The main aims of this research were to investigate the effect of different welding conditions on the physical and mechanical properties of the joints produced and to investigate these effects on the micro- and macro-structures of the joints produced. A series of welds were made using Eltex Tub 124 and Rigidex 002-50 pipes of 180mm diameter. The fusion pressure and heatsoak times were varied. A milling machine witha twin cutter arrangement was used to obtain the test specimens from around the circumference of the pipes. Differential scanning calorimetry was used to study the effect of sample preparation methodology on the thermo-oxidative stability. Polarised light microscopy and image analysis were used to study the macro- and micro-structural developments in the weld joint. Joint strength was evaluated via standard and non-standard tensile test methods. Milling the samples to produce the test specimens was found to decrease significantly the thermo-oxidative resistance of the polymer. Reasons for this behaviour have been proposed. In order to achieve high quality thin films from microtomy, custom-made blades were used. This programme also developed the optimum polishing method for the microtomed blades. The macro-structure of the bead: its shape and dimensions were found to be a function of temperature and pressure. Correlation was found between the bead geometry and the position around the circumference of the pipe. The macrostructures within the weld zone also showed this dependence on the position along the circumference of the pipe. An examination of the microstructures of each weld had shown the presence of five different zones. The feasibility of using microtomed thin sections in a tensile test was demonstrated. The test method provides a means to study failure initiation and propagation in the tensile test specimen. Initial deformation was found to occur in the centre of the melt-affected zone (MAZ) and the final failure occurs at the junction of the weld bead and the bulk polymer. Tests on films without the weld bead showed that maximum deformation occurred at the centre of the sample within the MAZ. The presence of the bead and the asymmetry in the test specimens caused by the welding process were found to have a significant influence on the failure mode and the failure strain. The strain rate was also found to play a significant role in both beaded and debeaded samples. The failure was initiated from the pseudo notches in the beaded samples. In the debeaded sample the failure was within the MAZ.
APA, Harvard, Vancouver, ISO, and other styles
19

Zheng, Hong Yu. "In-process quality analysis of laser cutting." Thesis, Imperial College London, 1990. http://hdl.handle.net/10044/1/7792.

Full text
APA, Harvard, Vancouver, ISO, and other styles
20

Lee, Wee Leong. "Developing a lean response to interruptions intemperature dependent processes." Thesis, Imperial College London, 2002. http://hdl.handle.net/10044/1/7701.

Full text
APA, Harvard, Vancouver, ISO, and other styles
21

Begg, John. "Process optimisation in the squeeze casting of zinc-aluminium alloys and composites." Thesis, Loughborough University, 1992. https://dspace.lboro.ac.uk/2134/27495.

Full text
Abstract:
Squeeze casting is a process which has the potential to produce castings with exceptional mechanical properties. It also appears to be the most suitable route to produce sound cast metal matrix composites. An investigation was carried out into the squeeze casting of four zinc–aluminium alloys: commercial ZAS (simple eutectic alloy); commercial ZA12 (simple eutectic alloy); commercial ZA27 (peritectic alloy); binary Zn-37Al (solid solution alloy). Although the three commercial alloys can be cast by a variety of conventional gravity and pressure processes it was considered that squeeze casting would produce castings with more homogeneous microstructures and enhanced room temperature properties. The binary Zn-37Al was considered to be a suitable alloy for squeeze casting.
APA, Harvard, Vancouver, ISO, and other styles
22

Ogbogu, S. O. E. "Electromagnetic stirring in the continuous casting of molten metal." Thesis, University of Bradford, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.374933.

Full text
APA, Harvard, Vancouver, ISO, and other styles
23

Ghasemshahi, Mehrdad. "PIKBES : expert system for welding process quality control." Thesis, Loughborough University, 1991. https://dspace.lboro.ac.uk/2134/28017.

Full text
Abstract:
The present research has arisen from a continuation of the WRAPS (Welding Robotic Adaptive Programming and Simulation) project at Loughborough University, and its development as the supervisory controller of a flexible welding system. A knowledge based expert system (PIKBES) has been developed for on-line expert modification of pre-programmed welding procedures during fabrication of batches in a flexible adaptive robotic welding environment.
APA, Harvard, Vancouver, ISO, and other styles
24

Elmes, Paul R. "Fabrication and evaluation of injection moulded 1-3 piezoelectric ceramic/polymer composites." Thesis, University of Surrey, 2000. http://epubs.surrey.ac.uk/843595/.

Full text
Abstract:
The objective of the current work was to establish a viable manufacturing technology for 1-3 piezoelectric ceramic/polymer composites, capable of meeting the high volume production requirements. To this end, an extensive development and fabrication programme has been successfully completed, which demonstrates the feasibility of the injection moulding process as a potential fabrication route. The technology will make available to the MOD a new generation of low-cost transducers tailored to perform in the frequency range suitable for underwater applications. The piezoelectric ceramic used throughout this study was PZT-5H. During the course of the investigation two types of feedstock formulation were evaluated. The first employed a binder system developed in-house based on polypropylene, microcrystalline wax and stearic acid. The second formulation employed a commercial binder system designed specifically for ceramic/metal injection moulding. In the case of the 'in-house' binder, two formulations were prepared with approximately 62% by volume PZT-5H but with differing ratios of polypropylene to microcrystalline wax. Three formulations were prepared with the 'commercial' binder system containing approximately 55%, 58% and 60% by volume PZT-5H respectively. Compounding by twin screw extrusion produced a feedstock consisting of discrete particles of PZT-5H, approximately 0.5 ?m in diameter, homogeneously distributed within the organic binder. All formulations displayed shear thinning behaviour when evaluated by capillary rheometry and had shear viscosities below 1000 Pa s at a shear rate of 100 s-1 Further, all formulations displayed tension thinning behaviour-and were characterised as viscoelastic. Attempts to produce an acceptable 1-3 preform moulding from feedstock based on the in-house binder system were unsuccessful. It was necessary to reduce the ceramic loading to 30% by volume before a complete 1-3 preform could be moulded. The failure to mould preforms from the in-house formulation was attributed to its high elongational viscosity. It was therefore concluded that an elongational viscosity of 30 kPa s at a tensile strain rate of 58 S-1 is undesirable for moulding this particular component. Satisfactory conditions were established for the production of 1-3 preform mouldings from the commercial feedstock formulation containing 58% by volume PZT-5H. Optimisation of the injection rate and hold pressure was possible by investigating the variation in pillar-density across the 1-3 preform mouldings. Satisfactory heating schedules for both the binder removal and sintering stages were established. Microstructural characterisation of sintered pillars revealed grain sizes ranging from 2 to 7 ?.m in diameter. Orientation effects in the sintered microstructure were not apparent in samples moulded at different injection rates. The addition of cover plates to poled composites containing epoxy resin was found to increase the hydrophone figure of merit (HFOM) by an order of magnitude. HFOM values measured during the present work for injection moulded 1-3 composites are comparable with similar composites fabricated by the dice-and-fill technique.
APA, Harvard, Vancouver, ISO, and other styles
25

Shore, Paul. "Machining of optical surfaces in brittle materials using an ultra-precision machine tool." Thesis, Cranfield University, 1995. http://dspace.lib.cranfield.ac.uk/handle/1826/3610.

Full text
Abstract:
Investigations of machining optical surfaces into brittle materials using an ultra precision machine tool are presented. The newly developed ultra precision NION machine is evaluated to gain a good appreciation of its operating performance. The machining accuracy capability of this machine is established by careful measurement of its motion accuracy, thermal and dimensional stability and loop stiffness. Corroboration of these measurements are provided by assessment of surfaces which were produced in soft 'easily machined' metal materials. It was found that surfaces smooth to -1 nm Ra could be produced on the NION machine and with a form error of less than 100 nm P-V. The main source of figure error, approximately 80 nm, was found to be caused by the synchronous axial error motion of the workhead spindle. Other elements of the machine, including thermal effects, incurred less than 25 nm of additional figure error. Assessment of the diamond turning process for the producing optical surfaces made in a number of important optical materials, which are ostensibly brittle, were undertaken. Turning tests were carried out to establish the relative difficulty for machining optical surfaces in these materials and to define the most important parameters which affect the attained surface quality. Assessment of the produced surfaces was based on their roughness quality, surface morphology and residual stress condition. It was found that diamond tool edge quality degraded with total cut distance. Tool cut distance was found to be a major influence on achievable material removal rate before micro-fractures became present at the surface. Surface quality and residual stress condition were also greatly influenced by the overall tool cut distance. Diamond grinding trials were also carried out using the NION machine tool. These grinding trials were carried out using a mode of grinding which permits complex shape optical surfaces to be produced. Various grinding technologies were employed to establish the optimum methods. Selected grinding trials were carried out to establish the dominate parameters affecting the optical quality. Assessment of the machined surfaces was in regard of their surface roughness, residual stress and severity of sub-surface micro cracking. It was found that grinding wheel specification was a major influence on surface quality and sub-surface damage. The level of residual stress associated with 'ductile' mode grinding was not found to prohibit its application toward the direct manufacture of optical elements. Selection of grinding parameters which ensured the grain depth of cut, GDOC, parameter did not exceed the materials critical depth, dc, allowed glass surfaces to be ground to 1-2 nm Ra. These ground glass surfaces appeared free of any surface fractures. Sub-surface assessments did however reveal small levels of micro-fractures hidden below the surface. Discussion of both machining processes is provided. Available material removal rates for each process is given when cutting a number of important optical materials. Conclusions regarding the production of both Infrared and visible wavelength optics using the NION machine tool are provided. Recommendations for future work to improve both the understanding of the processes and the effectiveness of applying the processes are suggested.
APA, Harvard, Vancouver, ISO, and other styles
26

Johnstone, Iain. "Critical study of high efficiency deep grinding." Thesis, Cranfield University, 2002. http://dspace.lib.cranfield.ac.uk/handle/1826/3586.

Full text
Abstract:
The recent years, the aerospace industry in particular has embraced and actively pursued the development of stronger high performance materials, namely nickel based superalloys and hardwearing steels. This has resulted in a need for a more efficient method of machining, and this need was answered with the advent of High Efficiency Deep Grinding (HEDG). This relatively new process using Cubic Boron Nitride (CBN) electroplated grinding wheels has been investigated through experimental and theoretical means applied to two widely used materials, M50 bearing steel and IN718 nickel based superalloy. It has been shown that this grinding method using a stiff grinding centre such as the Edgetek 5-axis machine is a viable process. Using a number of experimental designs, produced results which were analysed using a variety of methods including visual assessment, sub-surface microscopy and surface analysis using a Scanning Electron Microscope (SEM), residual stress measurement using X-Ray Diffraction (XRD) techniques, Barkhausen Noise Amplitude (BNA) measurements, surface roughness and Vickers micro-hardness appraisal. It has been shown that the fundamentals of the HEDG process have been understood through experimental as well as theoretical means and that through the various thermal models used, grinding temperatures can be predicted to give more control over this dynamic process. The main contributions to knowledge are made up of a number of elements within the grinding environment, the most important being the demonstration of the HEDG effect, explanation of the phenomenon and the ability to model the process. It has also been shown that grinding is a dynamic process and factors such as wheel wear will result in a continuous change in the optimum grinding conditions for a given material and wheel combination. With the significance of these factors recognised, they can be accounted for within an industrial adaptive control scenario with the process engineer confident of a more efficient use of time and materials to produce a higher quality product at lower cost.
APA, Harvard, Vancouver, ISO, and other styles
27

Vairis, Achilles. "High frequency linear friction welding." Thesis, Online version, 1997. http://ethos.bl.uk/OrderDetails.do?did=1&uin=uk.bl.ethos.389136.

Full text
APA, Harvard, Vancouver, ISO, and other styles
28

Driscoll, Kelly J. "Fused salt electrorefining of zinc." Thesis, University of Cambridge, 1990. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.358634.

Full text
APA, Harvard, Vancouver, ISO, and other styles
29

Powell, Nicholas Newton. "Incremental forming of flanged sheet metal components." Thesis, University of Cambridge, 1990. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.357609.

Full text
APA, Harvard, Vancouver, ISO, and other styles
30

Edwards, J. "Shot peen forming : the effect of constraint." Thesis, University of Cambridge, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.361767.

Full text
APA, Harvard, Vancouver, ISO, and other styles
31

Lobley, Christopher Marcus. "Tape casting as a novel processing route for silicon carbide fibre-reinforced titanium metal matrix composites." Thesis, Queen Mary, University of London, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.298249.

Full text
APA, Harvard, Vancouver, ISO, and other styles
32

Domann, Michael. "Characteristics of spray unsteadiness." Thesis, Imperial College London, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.268873.

Full text
APA, Harvard, Vancouver, ISO, and other styles
33

Biglari, Farid Reza. "Optimum design of forging dies using finite element method." Thesis, Imperial College London, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.299937.

Full text
APA, Harvard, Vancouver, ISO, and other styles
34

Djapic, Lilijana. "Determination of residual stress fields caused by shot peening." Thesis, Imperial College London, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.338587.

Full text
APA, Harvard, Vancouver, ISO, and other styles
35

Tropsa, Vlado. "Predicting residual stresses due to solidification in cast plastic plates." Thesis, Imperial College London, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.271561.

Full text
APA, Harvard, Vancouver, ISO, and other styles
36

Loeh, Hermann. "A coordination framework for complex production networks." Thesis, Imperial College London, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.248422.

Full text
APA, Harvard, Vancouver, ISO, and other styles
37

Smati, Z. "Development of a pulsed MIG system for fully automatic multipass welding." Thesis, Brunel University, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.355152.

Full text
APA, Harvard, Vancouver, ISO, and other styles
38

Ong, Lay Im. "Investigations into profile ring rolling of aluminium alloy bicycle wheel rims through experiments and numerical process simulations." Thesis, Brunel University, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.280726.

Full text
APA, Harvard, Vancouver, ISO, and other styles
39

Harris, Thomas John. "Neural network characterisation of ultrasonic data and its use in the control of submerged arc welding." Thesis, Brunel University, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.332840.

Full text
APA, Harvard, Vancouver, ISO, and other styles
40

Walshe, K. B. A. "Computer-aided estimating of production tooling costs with particular reference to injection moulds." Thesis, Brunel University, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.371208.

Full text
APA, Harvard, Vancouver, ISO, and other styles
41

Liening, Ansgar. "Rapid engineering of natural shaped objects for orthopaedic applications with field data capture." Thesis, Coventry University, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.247189.

Full text
APA, Harvard, Vancouver, ISO, and other styles
42

Gill, R. "An investigation into the effect of the ratio of grinding wheel speed to workpiece speed in the centreless grinding process." Thesis, Coventry University, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.373780.

Full text
APA, Harvard, Vancouver, ISO, and other styles
43

Longfield, Nicholas Peter. "An investigation of ultrasonically modified laser welding." Thesis, Coventry University, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.364684.

Full text
APA, Harvard, Vancouver, ISO, and other styles
44

Upadhyay, P. L. "Production of Nbsub(3)Sn conductors by powder metallurgy." Thesis, University of Oxford, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.370305.

Full text
APA, Harvard, Vancouver, ISO, and other styles
45

Piers, Newbery A. "Electric arc spray forming of nickel alloys and nickel aluminides." Thesis, University of Oxford, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.359486.

Full text
APA, Harvard, Vancouver, ISO, and other styles
46

Gerlach, Christian. "Sequential biaxial drawing of polyester film." Thesis, University of Oxford, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.267906.

Full text
APA, Harvard, Vancouver, ISO, and other styles
47

Addison, Julian Alston. "The electrostatic deposition of powder coatings." Thesis, University of Oxford, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.388929.

Full text
APA, Harvard, Vancouver, ISO, and other styles
48

Chen, Desong. "Modelling and control of zinc coating." Thesis, University of Oxford, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.314906.

Full text
APA, Harvard, Vancouver, ISO, and other styles
49

Tortora, Giacomo. "Control reconfiguration for fault tolerance." Thesis, University of Oxford, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.270753.

Full text
APA, Harvard, Vancouver, ISO, and other styles
50

Monaghan, David. "Twin roll cast aluminium alloys." Thesis, University of Oxford, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.357441.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the bibliographies on the topic 'Industrial and manufacturing processes' for other source types:
Journal articles Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography