Academic literature on the topic 'Indirect additive manufacturing'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Indirect additive manufacturing.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Indirect additive manufacturing":
He, Rujie, Niping Zhou, Keqiang Zhang, Xueqin Zhang, Lu Zhang, Wenqing Wang, and Daining Fang. "Progress and challenges towards additive manufacturing of SiC ceramic." Journal of Advanced Ceramics 10, no. 4 (July 18, 2021): 637–74. http://dx.doi.org/10.1007/s40145-021-0484-z.
Khan, Shah Fenner, M. J. German, and K. W. Dalgarno. "Indirect Additive Manufacturing Processing of Poly-Lactide-co-Glycolide." Applied Mechanics and Materials 754-755 (April 2015): 985–89. http://dx.doi.org/10.4028/www.scientific.net/amm.754-755.985.
Aizat, M., and S. F. Khan. "Fabrication of mandible fracture plate by indirect additive manufacturing." Journal of Physics: Conference Series 908 (October 2017): 012063. http://dx.doi.org/10.1088/1742-6596/908/1/012063.
Carreira, Pedro, Daniel Gatões, Nuno Alves, Ana Sofia Ramos, and Maria Teresa Vieira. "Searching New Solutions for NiTi Sensors through Indirect Additive Manufacturing." Materials 15, no. 14 (July 19, 2022): 5007. http://dx.doi.org/10.3390/ma15145007.
Shahzad, Khuram, Jan Deckers, Zhongying Zhang, Jean-Pierre Kruth, and Jef Vleugels. "Additive manufacturing of zirconia parts by indirect selective laser sintering." Journal of the European Ceramic Society 34, no. 1 (January 2014): 81–89. http://dx.doi.org/10.1016/j.jeurceramsoc.2013.07.023.
Abdelaal, Osama, Saied Darwish, Khaled Abd Elmougoud, and Saleh Aldahash. "A new methodology for design and manufacturing of a customized silicone partial foot prosthesis using indirect additive manufacturing." International Journal of Artificial Organs 42, no. 11 (May 24, 2019): 645–57. http://dx.doi.org/10.1177/0391398819847682.
Greeff, G. P. "Material Flow Rate Estimation in Material Extrusion Additive Manufacturing." NCSL International measure 13, no. 1 (2021): 46–56. http://dx.doi.org/10.51843/measure.13.1.5.
Snosi, Ahmed Mamdouh, Shaimaa Mohamed Lotfy, Yasmine Galaleldin Thabet, Marwa Ezzat Sabet, and Fardos Nabil Rizk. "Subtractive versus additive indirect manufacturing techniques of digitally designed partial dentures." Journal of Advanced Prosthodontics 13, no. 5 (2021): 327. http://dx.doi.org/10.4047/jap.2021.13.5.327.
Montero, Joaquin, Pablo Vitale, Sebastian Weber, Matthias Bleckmann, and Kristin Paetzold. "Indirect Additive Manufacturing of resin components using polyvinyl alcohol sacrificial moulds." Procedia CIRP 91 (2020): 388–95. http://dx.doi.org/10.1016/j.procir.2020.02.191.
Ramadany, Mohamed, and Mohamed Saad Bajjou. "Applicability and integration of concrete additive manufacturing in construction industry: A case study." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 235, no. 8 (January 30, 2021): 1338–48. http://dx.doi.org/10.1177/0954405420986102.
Dissertations / Theses on the topic "Indirect additive manufacturing":
Mohamad, Khan Shah Fenner. "Novel indirect additive manufacturing for processing biomaterials." Thesis, University of Newcastle upon Tyne, 2015. http://hdl.handle.net/10443/3022.
Bernardo, Jesse Raymond. "Indirect Tissue Scaffold Fabrication via Additive Manufacturing and Biomimetic Mineralization." Thesis, Virginia Tech, 2010. http://hdl.handle.net/10919/36312.
Master of Science
Grimaud, Pierre. "Élaboration de prothèses dentaires par fabrication additive indirecte combinant stéréolithographie et gel casting." Electronic Thesis or Diss., Valenciennes, Université Polytechnique Hauts-de-France, 2024. http://www.theses.fr/2024UPHF0004.
This thesis results from collaborative research initiated in October 2020, the theme of which revolves around the development of technical ceramic pieces with complex geometry using innovative processes. Combining the skills of CERAMATHS of Maubeuge-France and the BCRC of Mons-Belgium, this applied thesis was co-financed by the agglomeration of Maubeuge-Val-de-Sambre (CAMVS) and the BCRC and is part of an approach of Eco-design aimed in particular at the manufacture of dental crowns in ZrO2. The established strategy consists of combining additive techniques with gel-casting processes, by molding biosourced polymer gels that can be mineralized after conventional heat treatment. This involves addressing recurring problems specific to machining operations on parts with complex geometry (production of waste, appearance of microcracks, etc.). Numerous tests and experimental measurements are presented, as well as molecular modeling calculations, in order to understand the chemical mechanisms involved during the transformation stages and correlate physicochemical measurements and forecast calculations. The thesis is therefore divided into four main chapters: Chapter II presents dental prostheses in general and a description of the various manufacturing techniques taken from the literature. Focusing mainly on the making of ceramic pieces, this bibliographical chapter allows us to compare and classify the processes between them, specifying the techniques of direct and indirect additive, subtractive and formative shaping. A focus on the gel casting process allows us to address the potential advantages of a route using a gel loaded with ceramic powders. By justifying the experimental approach adopted, this bibliography will make it possible to confront the current difficulties of implementing complex ceramic parts with the requirements of the dental field. We will see in the chapter III that Agarose can be used as a sacrificial polymer matrix capable of dispersing ceramic powders before heat treatment and densification. This chapter is thus devoted to the characterization of raw materials, then to the manufacture of ceramic parts combining an additive method (mold design) and a Gel Casting method using Agarose. On the one hand, agarose in solution is presented from a preparatory, behavioral and physicochemical point of view. Furthermore, the manufacturing of molds by stereolithography is also described. Chapter IV specifies the strategies and work undertaken to modify the general properties of agarose. Various agarose succinates have been synthesized and experimentally characterized in this direction. Results are presented to qualify the rheological behavior, with interpretations supported by macromolecular modeling calculations. Chapter V concerns the implementation work of chemically activated gelation in order to exploit the properties of sodium alginate rather than those of agarose. In this chapter, two different pathways are studied based on stoichiometric variations of the initial reaction medium, as well as promising shaping results. The general conclusion specifies a qualitative assessment and perspectives on our process which combines molds obtained by stereolithography and a viscous matrix based on natural polymers such as agarose and sodium alginate
Duarte, Valdemar Rebelo. "Developments in Directed Energy Deposition Additive Manufacturing: In-situ Hot Forging and Indirect Cooling." Doctoral thesis, 2022. http://hdl.handle.net/10362/134198.
A tecnologia de deposição direta de energia por arco (DED-arc) tem competido com outras tecnologias de fabrico aditivo devido à sua elevada taxa de deposição, capacidade de produzir componentes de grandes dimensões com média/alta complexidade geométrica e baixos custos de implementação e funcionamento. Contudo, as elevadas tensões residuais, as microestruturas grosseiras, ou os defeitos do tipo poros, podem comprometer algumas aplicações industriais e necessitam de ser superados. Este trabalho visou desenvolver e validar duas variantes inovadoras de processo DED- arc: uma baseada no forjamento a quente; e outra no controlo de temperatura. A variante baseada no forjamento, consistiu em forjar o material depositado imediatamente após a deposição, utilizando baixas forças. O objetivo foi a produção de uma zona de deformação plástica uniforme ao longo de cada camada, para promover alterações microestruturais, nomeadamente o refinamento dos grãos e a redução da anisotropia. A variante baseada no trabalho termodinâmico consistiu em arrefecer os componentes do martelo e o gás utilizado para proteger o banho de fusão, com o objetivo de aumentar a taxa de arrefecimento e assim evitar a coalescência dos grãos. Neste sentido, foi concebido e fabricado um equipamento de DED-arc, com características específicas para investigação. O efeito do forjamento a quente foi estudado detalhadamente no aço inoxidável 316LSi, e foi verificada a viabilidade da sua aplicação noutros materiais relevantes industrialmente. Concluiu-se que o forjamento induz recristalização dinâmica, aumenta os pontos de nucleação e impede o crescimento de grãos epitaxiais, contribuindo para uma microestrutura globalmente mais fina, homogénea e com melhores propriedades mecânicas. O sistema de arrefecimento desenvolvido baixou a temperatura do bocal e do martelo durante as deposições consecutivas. O arrefecimento do gás de proteção não teve efeito nas taxas de arrefecimento nem na microestrutura do material, contudo, observou-se que o forjamento altera as condições de fluxo de calor, promovendo taxas de arrefecimento maiores.
Book chapters on the topic "Indirect additive manufacturing":
Singh, Gurminder, Pawan Sharma, Kedarnath Rane, and Sunpreet Singh. "Indirect Rapid Tooling Methods in Additive Manufacturing." In Additive and Subtractive Manufacturing Processes, 163–84. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003327394-9.
Weiss, F., E. Garrelts, D. Roth, H. Binz, M. Brunetti, and T. Karcher. "Konstruktionsrestriktionen für das Indirect Tooling mit FDM und Feinguss." In Rapid.Tech + FabCon 3.D – International Trade Show + Conference for Additive Manufacturing, 111–27. München: Carl Hanser Verlag GmbH & Co. KG, 2018. http://dx.doi.org/10.3139/9783446458123.007.
Weiss, F., E. Garrelts, D. Roth, H. Binz, M. Brunetti, and T. Karcher. "Konstruktionsrestriktionen für das Indirect Tooling mit FDM und Feinguss." In Rapid.Tech + FabCon 3.D – International Trade Show & Conference for Additive Manufacturing, 111–27. München, Germany: Carl Hanser Verlag GmbH & Co. KG, 2018. http://dx.doi.org/10.1007/978-3-446-45812-3_7.
Chaudhuri, Atanu, Elham Sharifi, Saeed Davoudabadi Farahani, Lasse Guldborg Staal, and Brian Vejrum Waehrens. "The Journey from Direct and Indirect Additive Manufacturing of Individual Parts to Virtual Warehousing of the Parts Portfolio: Lessons for Industrial Manufacturers." In The Future of Smart Production for SMEs, 239–51. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-15428-7_20.
Haar, Christoph, Hangbeom Kim, and Lukas Koberg. "AI-Based Engineering and Production Drawing Information Extraction." In Lecture Notes in Mechanical Engineering, 374–82. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-18326-3_36.
Singh, Sunpreet, Chander Prakash, and M. Uthayakumar. "Recent Advancements in Customized Investment Castings Through Additive Manufacturing." In Additive Manufacturing, 296–319. IGI Global, 2020. http://dx.doi.org/10.4018/978-1-5225-9624-0.ch012.
Gonzalez-Gutierrez, Joamin. "Indirect Additive Manufacturing Techniques for Metal Parts: Binder-Based Additive Manufacturing Techniques." In Encyclopedia of Materials: Metals and Allloys, 319–29. Elsevier, 2022. http://dx.doi.org/10.1016/b978-0-12-819726-4.00100-9.
Singh, Sunpreet, Chander Prakash, and M. Uthayakumar. "Recent Advancements in Customized Investment Castings Through Additive Manufacturing." In Handbook of Research on Green Engineering Techniques for Modern Manufacturing, 24–48. IGI Global, 2019. http://dx.doi.org/10.4018/978-1-5225-5445-5.ch003.
Bibb, Richard, Dominic Eggbeer, Abby Paterson, and Mazher Iqbal Mohammed. "Prosthetic rehabilitation applications case study 6—Evaluation of direct and indirect additive manufacture of maxillofacial prostheses using additive manufacturing." In Medical Modeling, 357–75. Elsevier, 2024. http://dx.doi.org/10.1016/b978-0-323-95733-5.00022-3.
Xiao, Xianfeng, Cong Lu, Yanshu Fu, Xiaojun Ye, and Lijun Song. "Progress on Experimental Study of Melt Pool Flow Dynamics in Laser Material Processing." In Liquid Metals [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.97205.
Conference papers on the topic "Indirect additive manufacturing":
Tan, Yu En, and Seung Ki Moon. "Indirect 3D Printing of an Inflatable Wing for Small UAVS Reinforced with 3D Hexagonal Diamond Structures." In 1st International Conference on Progress in Additive Manufacturing. Singapore: Research Publishing Services, 2014. http://dx.doi.org/10.3850/978-981-09-0446-3_119.
Mun, Jiwon, Jaehyung Ju, and James Thurman. "Indirect Additive Manufacturing Based Casting (I AM Casting) of a Lattice Structure." In ASME 2014 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/imece2014-38055.
Oliveira, Gonçalo, Bernardo Alves, Ricardo Mineiro, Ana Maria Rocha Senos, Cristina Fernandes, Daniel Figueiredo, and Maria Teresa Vieira. "Indirect Additive Manufacturing (Material Extrusion) as a Solution to a New Concept of Cutting Tools." In World Powder Metallurgy 2022 Congress & Exhibition. EPMA, 2022. http://dx.doi.org/10.59499/wp225366866.
Mun, Jiwon, Matthew Busse, Jaehyung Ju, and James Thurman. "Multilevel Metal Flow-Fill Analysis of Centrifugal Casting for Indirect Additive Manufacturing of Lattice Structures." In ASME 2015 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/imece2015-52270.
Cacho, Luís, Bernardo Alves, Amílcar Ramalho, Augusta Neto, Teresa Vieira, and Gonçalo Rodrigues. "Micromechanical Modeling of the Material Impact in the Feedstock Filament Properties for Indirect Additive Manufacturing (MEX)." In Materiais 2022. Basel Switzerland: MDPI, 2022. http://dx.doi.org/10.3390/materproc2022008038.
Gatões, Daniel, Luis Cacho, and M. T. Vieira. "μCT Non-destructive Testing Of Additively Manufactured 3Dobjects As Support For True Sustainability." In Euro Powder Metallurgy 2023 Congress & Exhibition. EPMA, 2023. http://dx.doi.org/10.59499/ep235764060.
Heo, Hyeonu, Addis Tessema, Shaheer Iqbal, Jaehyung Ju, and Addis Kidane. "Thermal Stress Analysis of Gypsum Shell Cracking in Polyjet-Based Rapid Casting of Cellular Metals." In ASME 2015 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/imece2015-52417.
Yamada, J., H. Ibe, K. Sato, and N. Kato. "Functional WC Cemented Carbide by the Direct Selective Laser Forming." In ITSC2017, edited by A. Agarwal, G. Bolelli, A. Concustell, Y. C. Lau, A. McDonald, F. L. Toma, E. Turunen, and C. A. Widener. DVS Media GmbH, 2017. http://dx.doi.org/10.31399/asm.cp.itsc2017p0725.
Alves, B., D. Gatões, P. Soares, L. Rodrigues, and M. T. Vieira. "Material Extrusion: Shaping And Sintering Optimization Through µ-Tomography." In Euro Powder Metallurgy 2023 Congress & Exhibition. EPMA, 2023. http://dx.doi.org/10.59499/ep235765455.
Oliveira, Gonçalo, Ricardo Mineiro, Ana Maria Rocha Senos, Cristina Fernandes, Daniel Figueiredo, and Teresa Vieira Maria. "WC-Co Versus Ticn/WC–Co, Ni For New Cutting Tools." In Euro Powder Metallurgy 2023 Congress & Exhibition. EPMA, 2023. http://dx.doi.org/10.59499/ep235765296.
Reports on the topic "Indirect additive manufacturing":
Post, Brian, Celeste Atkins, Amiee Jackson, Phillip Chesser, Alex Roschli, Abby Barnes, Andrzej Nycz, et al. A Comparative Study of Direct and Indirect Additive Manufacturing Approaches for the Production of a Wind Energy Component. Office of Scientific and Technical Information (OSTI), June 2021. http://dx.doi.org/10.2172/1809969.