Relevant bibliographies by topics / Impedanční charakteristika

Contents

  1. Dissertations / Theses

Academic literature on the topic 'Impedanční charakteristika'

Author: Grafiati
Published: 28 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Impedanční charakteristika.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Dissertations / Theses on the topic "Impedanční charakteristika"

1

Holínský, Jan. "Měření pasivních kmitočtových výhybek pro reproduktorové soustavy." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2021. http://www.nusl.cz/ntk/nusl-442518.

Full text
Abstract:
The content of the master´s thesis is to approach the issue of measuring the characteristics of passive frequency crossover. The work describes individual types of measured characteristics and their possibility of measurement. Then the work describes design of modules for measurement characteristics of passive frequency crossover (shunt, resistive load and amplifier). These modules were made and tested for its functions. For the amplifier is then made a second design for fulfilment requirements. The second version isn’t made in this work. At the end of the work was prepared the theoretical part of the laboratory task: Measurement of characteristics of passive frequency crossover, including protocol.
APA, Harvard, Vancouver, ISO, and other styles
2

Kozák, Filip. "Analýza mikropáskových antén." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218633.

Full text
Abstract:
This work deals with the method for analysis of one-port microstrip circuits which is called as contour-integral method. The general procedure for evaluating of important parameters concerning the analysis of microstrip antennas is given. Next, the geometrical parameters necessary for the calculation of elements in U and H matrices are numerically solved. With the help of these matrices, the input impedance or the reflection coefficient can be easily found.
APA, Harvard, Vancouver, ISO, and other styles
3

Kotek, Jakub. "Elektrochemické korozní charakteristiky Mg-Zn systémů připravených metodou práškové metalurgie." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2018. http://www.nusl.cz/ntk/nusl-376788.

Full text
Abstract:
The diploma thesis deals with evaluation of electrochemical corrosion characteristics of Mg-Zn systems prepared by powder metallurgy in SBF solution. The main aim of the thesis is to analyze the influence of chemical composition, achieved structure and parameters of the process of production of Mg-Zn systems on their electrochemical corrosion characteristics. The basic electrochemical properties of the prepared materials will be evaluated by electrochemical impedance spectroscopy. In order to clarify the mechanism of corrosion of materials, the immersion tests will be used, accompanied by metallographic observations.
APA, Harvard, Vancouver, ISO, and other styles
4

Minda, Jozef. "Elektrochemické charakteristiky hořčíkových slitin AZ31 a AZ61 v Hankových roztocích." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2015. http://www.nusl.cz/ntk/nusl-217106.

Full text
Abstract:
This thesis deals with the characterization of electrochemical corrosion properties of magnesium alloys as promising materials for biomedical applications. The wrought alloys AZ31 and AZ61 were used and exposed to corrosive environments of Hanks solutions (SBF) to simulate environmental conditions in living organisms. For the evaluation of the surfaces was used scanning electron microscopy (SEM) with elemental analysis measured by energy-dispersive spectroscopy (EDS). Short-term (5 min) and long-term (72 h) corrosion tests were conducted in order to optimize the measurement methodology and obtain corrosion parameters - especially corrosion potential (Ekor), corrosion current density (ikor) and polarisation resistance (RP). To evaluation of the short-term tests were by potentiodynamic tests, namely the linear polarization (LP) test. Long-term tests were measured by electrochemical impedance spectroscopy (EIS). Effects of the composition of the alloys (AZ31 and AZ61), surface treatment (grinding and polishing) and the composition of the solution (SBF without Ca, Mg, and with Ca, Mg) were compared. Complex corrosion behaviour in time was characterized and corrosion mechanisms were discussed.
APA, Harvard, Vancouver, ISO, and other styles
5

Slouková, Karolína. "Hodnocení elektrochemických charakteristik tvářených hořčíkových slitin typu Mg-Al-Zn." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2016. http://www.nusl.cz/ntk/nusl-240550.

Full text
Abstract:
The aim of this master’s thesis is electrochemical characteristics evaluation of magnesium alloys. The theoretical part describes the properties of magnesium and its alloys and their corrosion characteristics. In the experimental part are presented results of corrosion resistance measurement of two types of wrought magnesium alloys. It was AZ31 and AZ61 magnesium alloys, which were measured in Hank’s solutions with addition of ions Ca2+ and Mg2+ (SBF+) and without addition of the ions (SBF). The solution temperature during the measurement was 37 ± 1 °C. The experiments were used electrochemical impedance spectroscopy (EIS) and potentiodynamic tests using linear polarization (LP). EIS measurements were done in times of 5 minutes, 1, 2, 4, 8, 12, 24, 48, 72, 96 and 168 hours. Potentiodynamic tests were only short-term and they started after 5 minutes of stabilization. Both methods were used for measuring the electrochemical characteristics of polished and ground surface of the samples. The most important measurement results were polarization resistance, corrosion potential and corrosion current density. The electrochemical measurements are used to estimate the chemical composition influence and alloy’s structure of the corrosion resistance.
APA, Harvard, Vancouver, ISO, and other styles
6

Mancl, Vlastimil. "Systém Hefaistos." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2019. http://www.nusl.cz/ntk/nusl-400640.

Full text
Abstract:
This master's thesis describes functionality and principle of the Hefaistos measurement system, which is fully automated and modular. Its purpose is to measure frequency responses of materials and its temperature dependence. The thesis describes all the necessary parts of the modular measurement system. Main part of this system is the control application programmed in LabVIEW software environment. Another necessary parts are impedance analyzers for acquiring frequency dependencies and heating chambers for heating measured materials. The control application ensures hardware synchronization between impedance analyzers and heating chambers. Together they create the Hefaistos system. Modularity of the system means that a user may choose which instrument combination will be used. The system offers choice between three impedance analyzers Agilent 4294A, Wayne Kerr 6520B and HIOKI 3532 LCR Hi-Tester and two heating chambers AOIP GEMINI 700 LRI and AOIP HYPERION. Possibilities of the Hefaistos system are demonstrated on the results of an example measurement.
APA, Harvard, Vancouver, ISO, and other styles
7

Miklíková, Zdeňka. "Studium optoelektrických vlastností tenkých vrstev organických polovodičů na bázi ftalocyaninů." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2015. http://www.nusl.cz/ntk/nusl-217103.

Full text
Abstract:
Diploma thesis is focused on the study of optoelectric properties of thin layers of organic materials based on phthalocyanines, which can be used as an active layer of photovoltaic cells. Especially are studied the properties of the thin active layers of PdPc and PdPc + IL on the glass or ceramic substrates with aluminium contact, which are prepared by material printing here. On the prepared samples were first measured current-voltage characteristics in the dark and in the light and then were measured impedance spectrums in the dark. The received results will be used to improve the properties and structures of photovoltaic cells.
APA, Harvard, Vancouver, ISO, and other styles
8

Florián, Pavel. "Elektrické a dielektrické vlastnosti organických materiálů pro fotovoltaické aplikace." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2014. http://www.nusl.cz/ntk/nusl-217037.

Full text
Abstract:
Diploma thesis deals with the use of organic materials in photovoltaic applications and the study of their electric and dielectric properties. The theoretical part of thesis deals issue of the use of organic polymeric materials in photovoltaics and their advantages and disadvantages. Next are the results of various studies of organic solar cells by other authors. In the practical part of the work are shown experimental results (volt-ampere characteristics and impedance spectra) of samples of organic semiconductors and their evaluation.
APA, Harvard, Vancouver, ISO, and other styles
9

Maráčková, Lucie. "Studium elektrických a dielektrických vlastností plynových senzorů na bázi iontových kapalin." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2017. http://www.nusl.cz/ntk/nusl-316154.

Full text
Abstract:
This diploma´s thesis is focused on a study of electrical and dielectric properties of gas sensors based on ionic liquids. Measurements were done on two different types of OECT substrates (0099 and 0160). Three ionic liquids and physiological solution PBS were chosen as electrolytes. Direct current current-voltage characteristic was measured. Switching rations of transistors with this electrolyte were determined by current-voltage characteristic. Alternating resistivity dependence on frequency were measured as well. Better properties showed OECT 0099 substrates.
APA, Harvard, Vancouver, ISO, and other styles
10

Pospíšil, Jan. "Studium dielektrických vlastností struktur tenkých vrstev organických materiálů." Doctoral thesis, Vysoké učení technické v Brně. Fakulta chemická, 2016. http://www.nusl.cz/ntk/nusl-261290.

Full text
Abstract:
The dissertation is focused on the study of electric and especially dielectric properties of thin film organic materials with their huge potential for optoelectronics and other industrial sectors. The theoretical part deals with the use of organic materials in organic photovoltaic cells, the methods of deposition techniques and characterization. The theoretical knowledge of the dielectric spectroscopy, including methods for determining the physical properties and evaluation of experimental data are also described. The experimental part is devoted to the study of small molecule organic solar cells with bulk heterojunction composed of electron donor molecule of DPP(TBFu)2 and electron acceptor fullerene derivatives, such as PC60BM, PC70BM and TC60BM. The experimental part is divided into two main parts. The first part deals with the study of processes occurring at the interface between the active layer and the contact; the second part is focused on transport processes inside the structure of photovoltaic cells and also contains a study of perovskite solar cells.
APA, Harvard, Vancouver, ISO, and other styles
More sources
You might also be interested in the extended bibliographies on the topic 'Impedanční charakteristika' for particular source types:
Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography