Academic literature on the topic 'Hydraulic automatic devices'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Hydraulic automatic devices.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Hydraulic automatic devices"
PARKHOMENKO, S. G., and G. G. PARKHOMENKO. "SIMULATION OF AUTOMATIC CONTROL SYSTEMS OF TILLAGE UNITS." Traktory i sel hozmashiny 84, no. 1 (January 15, 2017): 22–31. http://dx.doi.org/10.17816/0321-4443-66258.
Full textVasiliev, VB, AP Muslimov, and VA Vasiliev. "Universal test bench for studying automatic systems to control operating modes of hydraulic drilling machines and hydraulic equipment." IOP Conference Series: Earth and Environmental Science 991, no. 1 (February 1, 2022): 012018. http://dx.doi.org/10.1088/1755-1315/991/1/012018.
Full textКолобовникова, Д., D. Kolobovnikova, Евгений Майданюк, Evgeny Maydanyuk, Э. Петровский, and E. Petrovsky. "Automation of engine alignment in pumping facility." Science intensive technologies in mechanical engineering 2, no. 6 (June 1, 2017): 44–48. http://dx.doi.org/10.12737/article_592d163e95d2a0.50506220.
Full textLazutkin, Sergey. "On Creation of Energy-Saving Hydraulic Impact Devices." Applied Mechanics and Materials 756 (April 2015): 610–14. http://dx.doi.org/10.4028/www.scientific.net/amm.756.610.
Full textOchkur, Galina. "DYNAMIC CHARACTERISTICS CALCULATION FOR ELECTRO-HYDRAULIC CONVERTER OF NOZZLE-FLAP TYPE FOR MODERNIZATION OF SYSTEM FOR MOTOR-CAR FUEL FEEDING CONTROL." Bulletin of Bryansk state technical university 2020, no. 5 (May 13, 2020): 32–38. http://dx.doi.org/10.30987/1999-8775-2020-5-32-38.
Full textTarasevych, Yuliia, and Nataliia SOVENKO. "THE IMPACT OF SELECTED PARAMETERS ON PRESSURE DISTRIBUTION IN THE FACE THROTTLE OF A CENTRIFUGAL PUMP AUTOMATIC BALANCING DEVICE." Tribologia 297, no. 3 (December 30, 2021): 35–44. http://dx.doi.org/10.5604/01.3001.0015.6895.
Full textZhu, Qingyuan, Yuanhui Liu, Huosheng Hu, Liang Hou, and Mingjie Guan. "Using wavelet denoising in automatic online efficiency estimation of a hydraulic excavator." Transactions of the Institute of Measurement and Control 39, no. 8 (March 15, 2016): 1262–70. http://dx.doi.org/10.1177/0142331216634428.
Full textWang, Jian Chen, and Xiao Lei Deng. "The Design of Rolling Mills’ Automatic Control System Based on PLC." Key Engineering Materials 546 (March 2013): 25–29. http://dx.doi.org/10.4028/www.scientific.net/kem.546.25.
Full textKhan, Mahbubul A., and Vinod K. Garga. "A simple design for hydraulic consolidometer and volume gauge." Canadian Geotechnical Journal 31, no. 5 (October 1, 1994): 769–72. http://dx.doi.org/10.1139/t94-087.
Full textDeng, Chang Qi, and Bin Li. "The Design of Program for NTC Automatic Tool Change Based on S7-300." Key Engineering Materials 464 (January 2011): 322–26. http://dx.doi.org/10.4028/www.scientific.net/kem.464.322.
Full textDissertations / Theses on the topic "Hydraulic automatic devices"
Бартош, Тарас Тарасович, and Taras Bartosh. "Інформаційно-вимірювальна система установки для розсортування деталей за внутрішнім діаметром отворів." Master's thesis, ТНТУ ім. І. Пулюя, 2020. http://elartu.tntu.edu.ua/handle/lib/33691.
Full textThe information-measuring system of installation for sorting of details on internal diameter of apertures is developed. In this qualification work of the master the mechanisms of giving and sorting, the mechanism of giving of details have been developed and designed. A study of the measurement error of this device carried out. The technical requirements for the meteorological parameters of the system are analyzed and described. The operation of the device, its structural and schematic diagrams are described. Scheme parameters are calculated.
Вступ...7 1 Аналітична частина...8 1.1 Аналіз аналогів...8 1.2 Результати патентного пошуку ...13 2 Основна частина...17 2.1 Вимоги до роботи приладу ...17 2.2 Схема та принцип роботи приладу ...17 2.3 Механізм подачі деталей та розсортування ...19 2.4 Механізм подачі деталей...20 2.5 Механізовані приводи установок...22 2.6 Побудова циклограми роботи установки ...25 2.7 Аналіз об’єкту вимірювання і технічних вимог до метрологічних параметрів системи...31 2.8 Аналіз і оцінка похибки схеми ...32 2.9 Похибка установки ...35 2.10 Повірка пристрою ...38 2.11 Проведення повірки...39 3 Науково-дослідна частина...41 3.1 Розрахункова частина...41 4 Спеціальна частина ...51 4.1 Опис роботи приладу...51 4.2 Опис структурної схеми і алгоритму роботи електричної схеми...55 4.3 Опис роботи принципової схеми приладу ...57 4.4 Розрахунок параметрів схеми...58 4.5 Електронна принципова схема ...62 4.6 Опис роботи принципової схеми ...63 4.7 Опис роботи програми ...67 5 Охорона праці та безпека в надзвичайних ситуаціях...69 5.1 Охорона праці...69 5.1.1 Заходи з охорони праці при виконанні монтажних робіт ...69 5.1.2 Санітарно-гігієнічне та побутове обслуговування робітників...70 5.1.3 Розрахунок штучного освітлення...70 5.2 Безпека в надзвичайних ситуаціях...75 5.2.1 Організація безпеки в надзвичайних ситуаціях при автоматизації технологічного процесу ...75 5.2.2 Створення цивільного захисту на ОГД ...77 5.2.3 Галузеві системи управління охороною праці. Мета та принципи функціонування...82 ЗАГАЛЬНІ ВИСНОВКИ ДО КВАЛІФІКАЦІЙНОЇ РОБОТИ ...85 ПЕРЕЛІК ПОСИЛАНЬ...86 ДОДАТКИ...
Узунов, Александр Васильевич. "Развитие теории моделирования и проектирования мехатронных систем и устройств." Doctoral thesis, 2011. https://ela.kpi.ua/handle/123456789/1319.
Full textBooks on the topic "Hydraulic automatic devices"
ZnO bao mo zhi bei ji qi guang, dian xing neng yan jiu. Shanghai Shi: Shanghai da xue chu ban she, 2010.
Find full textHermann, Schweickert, ed. Voith power transmission: 100 years of the Fottinger principle. Berlin: Springer-Verlag, 2005.
Find full textConference papers on the topic "Hydraulic automatic devices"
Koehler-McNicholas, Sara, Gregory Voss, Evandro Ficanha, John Looft, Nicole Walker, James Colvin, Andrew Hansen, and Matthew Wernke. "A Hydraulic Bimodal Ankle to Improve Mobility and Stability for Prosthesis Users." In 2020 Design of Medical Devices Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/dmd2020-9061.
Full textThompson-Salinas, Alfonso, Martin Ortega-Bren˜a, Manuel H. De la Torre-Ibarra, Bernardino Barrientos-Garci´a, and Victor J. Gonzalez-Villela. "Hydraulic Balance Ring Study and Design Using Optical Techniques." In ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-63260.
Full textBay, Andrew T. "Using CAE Simulation to Develop Increased Understanding, Repeatability and Reproducibility for Testing Electro-Hydraulic Automatic Transmission Control Devices." In SAE 2000 World Congress. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2000. http://dx.doi.org/10.4271/2000-01-0124.
Full textTaugbøl, Knut, Bengt Sola, Matthew Forshaw, and Arild Fjogstad. "Automatic Drilling Fluids Monitoring." In SPE/IADC International Drilling Conference and Exhibition. SPE, 2021. http://dx.doi.org/10.2118/204041-ms.
Full textLuna, J. M., S. Hernandez-Guerrero, C. Rubio-Arana, and R. H. Chavez. "Transient Analysis of the Thermal and Hydraulic Behavior of a Cooling Fluid in a Bayonet Tube." In ASME 2006 International Mechanical Engineering Congress and Exposition. ASMEDC, 2006. http://dx.doi.org/10.1115/imece2006-16265.
Full textValdiero, Antonio C., Ronei O. Ziech, Mauricio S. Pinto, Ivan J. Mantovani, and Luiz A. Rasia. "Development and Construction of an Instrumentalized Workbench With a Hydraulic Motor for Farm Machine Testing." In 9th FPNI Ph.D. Symposium on Fluid Power. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/fpni2016-1552.
Full textOtanez, Paul G., Chunhao J. Lee, Xu Chen, Chi-Kuan Kao, and Farzad Samie. "Torque Converter Clutch Low Slip Speed Detection and Control." In ASME 2010 Dynamic Systems and Control Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/dscc2010-4184.
Full textNadirov, Maruan, Renat Sadyrbakiyev, and Anton Skopich. "Well Performance Monitoring Using Management by Exception Rules and Alerts." In SPE Annual Caspian Technical Conference. SPE, 2021. http://dx.doi.org/10.2118/207003-ms.
Full textNadirov, Maruan, Renat Sadyrbakiyev, and Anton Skopich. "Well Performance Monitoring Using Management by Exception Rules and Alerts." In SPE Annual Caspian Technical Conference. SPE, 2021. http://dx.doi.org/10.2118/207003-ms.
Full textXiaoming, Sheng, Si Guangju, and Li Xin. "Reconfigurable Hydraulic-Mechanical Combined Drive Devices Based on Multi-functional Piston-Rod Built-in Hydraulic Cylinder." In 2010 International Conference on Digital Manufacturing and Automation (ICDMA). IEEE, 2010. http://dx.doi.org/10.1109/icdma.2010.267.
Full text