Relevant bibliographies by topics / Hlava válce

Contents

  1. Dissertations / Theses

Academic literature on the topic 'Hlava válce'

Author: Grafiati
Published: 28 June 2021
Last updated: 13 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Hlava válce.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Dissertations / Theses on the topic "Hlava válce"

1

Celý, Martin. "Zvýšení účinnosti spalovacího motoru pro malé autonomní prostředky." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-444982.

Full text
Abstract:
The work deals with the analysis of various possibilities of increasing the efficiency of a small internal combustion engine potentially usable for use in the field of autonomous devices of smaller dimensions. It contains an outline of the problems of modern smaller autonomous means and an analysis of available drives designed for them, especially an analysis of propulsion by internal combustion engines. In his next part of the work he provides information about the created mathematical model of the demonstration internal combustion engine in the GT-Power program and an analysis of places where and in what ways its efficiency can be increased. The design of two such components together with the evaluation of the achieved results offers the conclusion of this work.
APA, Harvard, Vancouver, ISO, and other styles
2

Provazníková, Martina. "Návrh hlavy válce typu triflux pro zážehový motor." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-228028.

Full text
Abstract:
This diploma thesis concern with substance and possibilities of contemporary computational fluid dynamics or CFD. Further it engages in design of intake ports of triflux cylinder head on the basis of cylinder head of Škoda 1,2 HTP that was digitized by 3D scanner. After design of standard intake ports and triflux system’s intake ports is maden simulation of flow through these intake ports with the assistance of CFD program.
APA, Harvard, Vancouver, ISO, and other styles
3

Kolivošková, Veronika. "Šroubový spoj turbodmychadla a hlavy válců." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-320114.

Full text
Abstract:
The subject of this diploma thesis is the theoretical basis of the screw connection theory and the subsequent application to the specific screw connection problem. Mentioned connection is part of the turbo charged combustion engine, specifically directly between the cylinder head and the turbocharger. The diploma thesis is divided into several parts. The first part dealing with selected chapters of the screw connections and the combustion engines theory, whose knowledge is important for further chapters of this diploma thesis. The next part shows method of creating the geometric and computational model, on which were performed the appropriate sensory analyses with respect to determine the cause of the nut and bolt loose in the given connection. On the basis of the gained knowledge and their evaluation has been created a separate calculation methodology in the last part of this thesis, which describing parameters that have an impact on this undesirable phenomenon, and which should be included in analyses for similar issues. The diploma thesis was realized in cooperation with ŠKODA Auto a.s., tř. Václav Klementa 869, Mladá Boleslav, and AUDI AG, Union-Straße 1, Ingolstadt.
APA, Harvard, Vancouver, ISO, and other styles
4

Hlavsa, Petr. "Optimalizace vlastností formovací směsi vodního jádra hlav válců." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-228316.

Full text
Abstract:
Submitted thesis deals with the change of existing binding system for the Hot–Box method for hardening serving for manufacturing of shell cores the water space of cylinder heads comprise of. Objectives for proposing new binding system for Warm–Box method of hardening under heat are to achieve reduction in creation of condensates and gas substances in binding material compared with existing binding system. Further the thesis is aimed at achieving optimal operating hardness the cores have by reduced batches of binding system and by reduced temperatures of cores in scope reflecting manufacturing conditions in the company Nemak Slovakia s.r.o. While resolving issues there were used methods for evaluating quality of opening materials, core mixtures and cores, further methods for evaluating quality of melt, casts and basic methods for statistical processing of results.
APA, Harvard, Vancouver, ISO, and other styles
5

Hlavsa, Petr. "Interakce jádro – tavenina při odlévání hlav válců z Al slitin do kovových forem." Doctoral thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-255281.

Full text
Abstract:
This dissertation thesis deals with interactions on the interface core - melt by casting of cylinder heads from Al alloys in semi-permanent moulds and solves a specific problem with sticky sand after decoring of a diesel cylinder head casting. It describes in detail the process of core production using the Cold-Box method and process of casting using the progressive technology Rotacast. It theoretically analyses the reaction on the interface core-melt and presents a classification of surface defects by Al castings produced by gravity casting into semi-permanent moulds. It also states the results of technological tests of binders, core mixtures and cores (Cogas analysis). By solution of a problem with sticky sand in intake and exhaust ports of diesel cylinder head casting is used methodology for problem solving DMAIC. All experimental tests are solved in laboratory and production conditions of an international company dealing with casting of cylinder heads from Al alloys in semi-permanent moulds.
APA, Harvard, Vancouver, ISO, and other styles
6

Foltis, Aleš. "Řešení montážních deformací bloku motoru." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230122.

Full text
Abstract:
Size and distribution of mount deformation are the main topics discussed in this thesis, using different static loading. The thesis’ primary focus is to show how deformation and stress of the engine block with cylinder liner are affected in the assembly order of the cylinder head. The calculation and evaluation of the solution are calculated by using method finite element, software Ansys. In addition other methods are discussed which can also measure the deformation of the engine block.
APA, Harvard, Vancouver, ISO, and other styles
7

Slovák, Marek. "Dvoudobý jednoválcový motocyklový motor s výfukovými ventily." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230391.

Full text
Abstract:
The master´s thesis deals with the design of two-stroke uniflow scavenged motorcycle engine according to patent František Pudil (PV 7018-80) 216305. The engine has been designed for using in off-road sport motorcycles. The objective of this thesis is to design the engine of this conception and to reveal benefits and defects of this concept by using this method. In this thesis the emphasis is put on design of the construction groups which are directly related to unconventional concept of engine. On the other hand, the parts which can be designed conventionally were solved marginally or were not solved at all. In the first part of the thesis there are thoroughly dicsussed expected benefits and disadvantages of this concept. Computational part focuses on valvetrain and porting of engine. Last part deals with design of engine parts.
APA, Harvard, Vancouver, ISO, and other styles
8

Ševčík, Ondřej. "Aplikace vysokotlakého palivového systému na vznětový motor." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378502.

Full text
Abstract:
This thesis focuses on the design of new high pressure injection system application on diesel engine. The design came from company Zetor’s demands. For this application was chosen system Common Rail supplied by company Bosch. Assignment was separated into several tasks. Research of suitable components for low pressure section, design of waste system and high pressure injection tubes design including injector clamping. Due to injectors used in this system was necessary to redesign cover for valves and even new system to lead wires from outside of the engine to injectors. Injector is attached by screw connection, which is composed from screw and clamping jaw. These parts are subjected to an analytic calculations. Clamping jaw of injector is even subjected to a FEM analysis, which focuses on fatigue life. Finally, the drawings were documented.
APA, Harvard, Vancouver, ISO, and other styles
9

Kohoutek, Petr. "Konstrukce univerzálního zařízení na dělení pneumatik." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228579.

Full text
Abstract:
The main content of of this thesis is a construction design and analysis of a machine for cutting tires. The resulting solution emerges from the design options and the option that meets the best selection criteria is chosen. Then the thesis stops for a while at the choice of cutting technology and tries to exemine its suitability for cutting tires. In its other part there is an attempt to clarify the relevant parts of the machine, where the benefits of three-dimensional views is used. Basic design and check calculations are done in the selected machine parts.
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography