Relevant bibliographies by topics / Heat transfer problems

Academic literature on the topic 'Heat transfer problems'

Author: Grafiati
Published: 6 September 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Heat transfer problems.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Heat transfer problems"

1

Orlande, Helcio R. B. "Inverse Heat Transfer Problems." Heat Transfer Engineering 32, no. 9 (August 2011): 715–17. http://dx.doi.org/10.1080/01457632.2011.525128.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Emery, A. F. "Solving stochastic heat transfer problems." Engineering Analysis with Boundary Elements 28, no. 3 (March 2004): 279–91. http://dx.doi.org/10.1016/s0955-7997(03)00058-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Brunetkin, А. I. "Integrated approach to solving the fluid dynamics and heat transfer problems." Odes’kyi Politechnichnyi Universytet. Pratsi, no. 2 (December 15, 2014): 108–15. http://dx.doi.org/10.15276/opu.2.44.2014.21.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

ITAGAKI, Haruaki. "Heat Transfer Problems in Space Systems." SHINKU 38, no. 6 (1995): 574–80. http://dx.doi.org/10.3131/jvsj.38.574.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Orlande, Helcio R. B., Marcelo J. Colaco, George S. Dulikravich, Flavio Vianna, Wellington da Silva, Henrique Fonseca, and Olivier Fudym. "STATE ESTIMATION PROBLEMS IN HEAT TRANSFER." International Journal for Uncertainty Quantification 2, no. 3 (2012): 239–58. http://dx.doi.org/10.1615/int.j.uncertaintyquantification.2012003582.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Fu, Bai-Shan, Liao Yi, and Jun Zhou. "Dilution refrigerator and its heat transfer problems." Acta Physica Sinica 70, no. 23 (2021): 230202. http://dx.doi.org/10.7498/aps.70.20211760.

Full text
Abstract:
In the research of cryogenic physics and quantum information science, it is essential to maintain a steady low temperature of millikelvin regime continuously. Dilution refrigerator is a widely used refrigeration device to achieve extremely low temperature. It utilizes the phase separation effect of superfluid <sup>4</sup>He and its isotope <sup>3</sup>He mixed solution at ultra-low temperatures. The performance of heat exchanger is the key factor to determine the performance of continuous cycle refrigerating machine. At extremely low temperatures, there appears a huge interfacial thermal resistance between helium and metal (Kapitza resistance), and the problem of heat exchange can be effectively solved by using the porous sintered metal particles to increase the contact area. Therefore, it is of significance to study the heat exchange between metal particles and liquid helium at extremely low temperature and to develop the relevant high-performance sintered Ag powder heat exchanger.
APA, Harvard, Vancouver, ISO, and other styles
7

Kozdoba, L. A. "Problems and Methods of Heat-Transfer Theory." Heat Transfer Research 30, no. 4-6 (1999): 385–99. http://dx.doi.org/10.1615/heattransres.v30.i4-6.200.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Colaço, Marcelo J., Helcio R. B. Orlande, and George S. Dulikravich. "Inverse and optimization problems in heat transfer." Journal of the Brazilian Society of Mechanical Sciences and Engineering 28, no. 1 (March 2006): 1–24. http://dx.doi.org/10.1590/s1678-58782006000100001.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Bai-Shan, Fu, LiaoYi, and Zhou Jun. "Dilution refrigerator and its heat transfer problems." Acta Physica Sinica 70, no. 23 (2021): 230202. http://dx.doi.org/10.7498/aps.71.20211760.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Jordan, A., S. Khaldi, M. Benmouna, and A. Borucki. "Study of non-linear heat transfer problems." Revue de Physique Appliquée 22, no. 1 (1987): 101–5. http://dx.doi.org/10.1051/rphysap:01987002201010100.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Heat transfer problems"

1

Jones, Alastair Stephen. "Convection heat transfer problems." Thesis, Keele University, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.267356.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Hussein, Mohammed Sabah. "Coefficient identification problems in heat transfer." Thesis, University of Leeds, 2016. http://etheses.whiterose.ac.uk/12291/.

Full text
Abstract:
The aim of this thesis is to find the numerical solution for various coefficient identification problems in heat transfer and extend the possibility of simultaneous determination of several physical properties. In particular, the problems of coefficient identification in a fixed or moving domain for one and multiple unknowns are investigated. These inverse problems are solved subject to various types of overdetermination conditions such as non-local, heat flux, Cauchy data, mass/energy specification, general integral type overdetermination, time-average condition, time-average of heat flux, Stefan condition and heat momentum of the first and second order. The difficulty associated with these problems is that they are ill-posed, as their solutions are unstable to inclusion of random noise in input data, therefore traditional techniques fail to provide accurate and stable solutions. Throughout this thesis, the Crank-Nicolson finite-difference method (FDM) is mainly used as a direct solver except in Chapter 7 where a three-level scheme is employed in order to deal with the nonlinear heat equation. An explicit FDM scheme is also employed in Chapter 10 for the two-dimensional case. The inverse problems investigated are discretised using the FDM and recast as nonlinear least-squares minimization problems with simple bounds on the unknown coefficients. The resulting problem is efficiently solved using the \emph{fmincon} or \emph{lsqnonlin} routines from MATLAB optimization toolbox. The Tikhonov regularization method is included where necessary. The choice of the regularization parameter(s) is thoroughly discussed. The stability of the numerical solution is investigated by introducing Gaussian random noise into the input data. The numerical solutions are compared with their known analytical solution, where available, and with the corresponding direct problem numerical solution where no analytical solution is available.
APA, Harvard, Vancouver, ISO, and other styles
3

Buckley, Donovan O. "Solution of Nonlinear Transient Heat Transfer Problems." FIU Digital Commons, 2010. http://digitalcommons.fiu.edu/etd/302.

Full text
Abstract:
In the presented thesis work, meshfree method with distance fields was extended to obtain solution of nonlinear transient heat transfer problems. The thesis work involved development and implementation of numerical algorithms, data structure, and software. Numerical and computational properties of the meshfree method with distance fields were investigated. Convergence and accuracy of the methodology was validated by analytical solutions, and solutions produced by commercial FEM software (ANSYS 12.1). The research was focused on nonlinearities caused by temperature-dependent thermal conductivity. The behavior of the developed numerical algorithms was observed for both weak and strong temperature-dependency of thermal conductivity. Oseen and Newton-Kantorovich linearization techniques were applied to linearized the governing equation and boundary conditions. Results of the numerical experiments showed that the meshfree method with distance fields has the potential to produced fast accurate solutions. The method enables all prescribed boundary conditions to be satisfied exactly.
APA, Harvard, Vancouver, ISO, and other styles
4

Copiello, Diego <1980&gt. "Multiobjective genetic algorithms applied to heat transfer problems." Doctoral thesis, Alma Mater Studiorum - Università di Bologna, 2009. http://amsdottorato.unibo.it/1218/1/copiello_diego_tesi.pdf.

Full text
Abstract:
In the present work, the multi-objective optimization by genetic algorithms is investigated and applied to heat transfer problems. Firstly, the work aims to compare different reproduction processes employed by genetic algorithms and two new promising processes are suggested. Secondly, in this work two heat transfer problems are studied under the multi-objective point of view. Specifically, the two cases studied are the wavy fins and the corrugated wall channel. Both these cases have already been studied by a single objective optimizer. Therefore, this work aims to extend the previous works in a more comprehensive study.
APA, Harvard, Vancouver, ISO, and other styles
5

Copiello, Diego <1980&gt. "Multiobjective genetic algorithms applied to heat transfer problems." Doctoral thesis, Alma Mater Studiorum - Università di Bologna, 2009. http://amsdottorato.unibo.it/1218/.

Full text
Abstract:
In the present work, the multi-objective optimization by genetic algorithms is investigated and applied to heat transfer problems. Firstly, the work aims to compare different reproduction processes employed by genetic algorithms and two new promising processes are suggested. Secondly, in this work two heat transfer problems are studied under the multi-objective point of view. Specifically, the two cases studied are the wavy fins and the corrugated wall channel. Both these cases have already been studied by a single objective optimizer. Therefore, this work aims to extend the previous works in a more comprehensive study.
APA, Harvard, Vancouver, ISO, and other styles
6

Chick, Eric. "Problems in forced and free convection." Thesis, Keele University, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.241449.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Valha, Jan. "Interfacial instability and spray heat transfer problems of two phase flow." Thesis, Middlesex University, 1996. http://eprints.mdx.ac.uk/6408/.

Full text
Abstract:
This thesis describes detailed investigations of two different problems in gas-liquid two-phase flow, namely, a study of interfacial stability in a partially filled cylinder subjected to vertical oscillations and a study of heat and mass transfer from hot spray droplets injected into an closed vessel. The interfacial instability study considers experimental data taken from the author's previous work. Cylinders of various diameters, partially filled with water, ethanol or glycerol were subjected to a sinusoidal vertical motion. The critical acceleration, causing the interfacial wave to grow unstable, was found to be approximately constant for a given cylinder diameter, independent on the amplitude of the forcing oscillations. The experiments also indicate that the critical Acceleration always decreases with increasing cylinder diameter. A mathematical analysis of the interfacial instability is based on a stability investigation of a Mathieu equation. It is shown that the experimental data fall into unstable regions for a single, first mode of oscillations. This finding is supported by the experimental analysis given by Cilliberto and Gollub. The analysis shows the effects of the liquid column height on the interfacial instability to be dependent on tanh (k..l.). This multiplier is equal to 1 for the column heights of 250mm, 500 mm and 750 mm, investigated, and a given cylinder diameter, thus having no effect on the results. Computational analysis of the interfacial problem is developed which is based on the simplified MAC method incorporating the Continuum Surface Force (CSF) model for simulating the effects of surface tension. Computational experiments were run for water and glycerol, the two liquids of significantly different properties. The results are presented in the form of time sequenced plots showing the interfacial positions and graphs relating the interfacial wave amplitude and time. Stability of the interface is found to be dependent on the initial surface disturbance. Growth of the interfacial wave is observed in some cases. In the range of situations investigated, surface tension effects are found to have only a small influence both on the stability and frequency of the interfacial oscillations. The period of interfacial oscillations with no forcing vibrations is found to be in good agreement with the period predicted by mathematical analysis. Influence of the initial disturbance profile was also investigated. The results indicate that the interfacial wave adopts oscillatory behaviour similar to the other cases. The oscillation frequency of the interfacial wave undergoing forcing vibrations is found to match the findings of the mathematical analysis. The wave oscillates with an angular velocity equal to the multiples of the half the forcing vibration angular velocity, co/2. In the second investigation a testing rig was constructed to investigate the heat and mass transfer processes in dense hot sprays injected into an enclosed cylindrical vessel. Heat and mass transfer rates were investigated indirectly from the measurements of the gas - vapour mixture pressure rise in the cylinder. The experiments covered different combinations of the parameters influencing the processes. The number and size of spray nozzles, the vessel volume, the type of gas and the initial pressure level in the cylinder were investigated. The experimental results indicate that, for the range of solid cone nozzles tested, the heat and mass transfer characteristics are, to a first approximation independent of the size of the nozzles. The results also show that the rise of spray chamber internal pressure is directly proportional to liquid temperature and flowrate. An analysis, based on energy balances for the whole cylinder, has yielded a new dimensionless group incorporating the important parameters of droplet heat transfer namely the droplet velocity and radius, spray chamber dimensions, gravity, conductivity and convectivity. A good match has been found between the analytical results and experimental findings. An improved analysis, incorporating the effect of evaporation from drops, is also presented. It is based on simultaneous solution of energy and mass balance equations for a single droplet. Again, good agreement with the experimental results is found. Both analyses indicate that, for this particular case of dense, evaporative spray, the Nusselt number tends to have a value equal to I.
APA, Harvard, Vancouver, ISO, and other styles
8

Goktolga, Mustafa Ugur. "Simulation Of Conjugate Heat Transfer Problems Using Least Squares Finite Element Method." Master's thesis, METU, 2012. http://etd.lib.metu.edu.tr/upload/12614787/index.pdf.

Full text
Abstract:
In this thesis study, a least-squares finite element method (LSFEM) based conjugate heat transfer solver was developed. In the mentioned solver, fluid flow and heat transfer computations were performed separately. This means that the calculated velocity values in the flow calculation part were exported to the heat transfer part to be used in the convective part of the energy equation. Incompressible Navier-Stokes equations were used in the flow simulations. In conjugate heat transfer computations, it is required to calculate the heat transfer in both flow field and solid region. In this study, conjugate behavior was accomplished in a fully coupled manner, i.e., energy equation for fluid and solid regions was solved simultaneously and no boundary conditions were defined on the fluid-solid interface. To assure that the developed solver works properly, lid driven cavity flow, backward facing step flow and thermally driven cavity flow problems were simulated in three dimensions and the findings compared well with the available data from the literature. Couette flow and thermally driven cavity flow with conjugate heat transfer in two dimensions were modeled to further validate the solver. Finally, a microchannel conjugate heat transfer problem was simulated. In the flow solution part of the microchannel problem, conservation of mass was not achieved. This problem was expected since the LSFEM has problems related to mass conservation especially in high aspect ratio channels. In order to overcome the mentioned problem, weight of continuity equation was increased by multiplying it with a constant. Weighting worked for the microchannel problem and the mass conservation issue was resolved. Obtained results for microchannel heat transfer problem were in good agreement in general with the previous experimental and numerical works. In the first computations with the solver
quadrilateral and triangular elements for two dimensional problems, hexagonal and tetrahedron elements for three dimensional problems were tried. However, since only the quadrilateral and hexagonal elements gave satisfactory results, they were used in all the above mentioned simulations.
APA, Harvard, Vancouver, ISO, and other styles
9

Pinto, Francesco <1978&gt. "Application of evolutionary techniques to energy transfer efficiency in heat transfer problems and low consumption buildings." Doctoral thesis, Alma Mater Studiorum - Università di Bologna, 2007. http://amsdottorato.unibo.it/419/1/Pinto.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Pinto, Francesco <1978&gt. "Application of evolutionary techniques to energy transfer efficiency in heat transfer problems and low consumption buildings." Doctoral thesis, Alma Mater Studiorum - Università di Bologna, 2007. http://amsdottorato.unibo.it/419/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Heat transfer problems"

1

Alifanov, Oleg M. Inverse Heat Transfer Problems. Berlin, Heidelberg: Springer Berlin Heidelberg, 1994. http://dx.doi.org/10.1007/978-3-642-76436-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Alifanov, O. M. Inverse heat transfer problems. Berlin: Springer-Verlag, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Favre-Marinet, Michel. Convective heat transfer: Solved problems. Hoboken, NJ: ISTE/John Wiley and Sons, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

D, Mikhaĭlov M. Heat transfer solver. Englewood Cliffs, N.J: Prentice Hall, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Cebeci, Tuncer. Convective heat transfer. 2nd ed. Long Beach, CA: Horizons Pub., 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Tuncer, Cebeci, and Cebeci Tuncer, eds. Convective heat transfer. 2nd ed. Long Beach, Calif: Horizons Pub., 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Conjugate problems in convective heat transfer. Boca Raton: CRC Press, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Jiji, Latif M. Heat transfer essentials: A textbook. New York: Begell House, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Heat transfer essentials: A textbook. 2nd ed. New York: Begell House, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Pitts, Donald R. 1000 solved problems in heat transfer. New York: McGraw-Hill, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Heat transfer problems"

1

Venkateshan, S. P. "Numerical Solution of Conduction Problems." In Heat Transfer, 253–321. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-58338-5_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ilich, Predrag-Peter. "Heat Transfer." In Selected Problems in Physical Chemistry, 23–32. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-04327-7_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Becker, Martin. "Heat Transfer Analysis and Design Problems." In Heat Transfer, 339–50. Boston, MA: Springer US, 1986. http://dx.doi.org/10.1007/978-1-4684-1256-7_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Rank, E. "Moving Boundary Problems and Solution Strategies in Semiconductor Process Simulation." In Heat Transfer, edited by L. C. Wrobel and C. A. Brebbia, 295–308. Berlin, Boston: De Gruyter, 1991. http://dx.doi.org/10.1515/9783110853209-021.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Alexandrou, A. N. "An Inverse Finite Element Method for Directly Formulated Free and Moving Boundary Problems." In Heat Transfer, edited by L. C. Wrobel and C. A. Brebbia, 149–64. Berlin, Boston: De Gruyter, 1991. http://dx.doi.org/10.1515/9783110853209-011.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Alifanov, Oleg M. "Introduction." In Inverse Heat Transfer Problems, 1–2. Berlin, Heidelberg: Springer Berlin Heidelberg, 1994. http://dx.doi.org/10.1007/978-3-642-76436-3_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Alifanov, Oleg M. "Conclusions." In Inverse Heat Transfer Problems, 329–31. Berlin, Heidelberg: Springer Berlin Heidelberg, 1994. http://dx.doi.org/10.1007/978-3-642-76436-3_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Alifanov, Oleg M. "Statements and Use of Inverse Problems in Studying Heat Transfer Processes and Designing Engineering Units." In Inverse Heat Transfer Problems, 3–32. Berlin, Heidelberg: Springer Berlin Heidelberg, 1994. http://dx.doi.org/10.1007/978-3-642-76436-3_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Alifanov, Oleg M. "Analysis of Statements and Solution Methods for Inverse Heat Transfer Problems." In Inverse Heat Transfer Problems, 33–69. Berlin, Heidelberg: Springer Berlin Heidelberg, 1994. http://dx.doi.org/10.1007/978-3-642-76436-3_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Alifanov, Oleg M. "Analytical Forms of Boundary Inverse Heat Conduction Problems." In Inverse Heat Transfer Problems, 70–95. Berlin, Heidelberg: Springer Berlin Heidelberg, 1994. http://dx.doi.org/10.1007/978-3-642-76436-3_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Heat transfer problems"

1

Hennecke, D. K. "HEAT TRANSFER PROBLEMS IN AERO-ENGINES." In Archives of Heat Transfer. Connecticut: Begellhouse, 1988. http://dx.doi.org/10.1615/ichmt.1988.aht.300.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Hennecke, D. K. "HEAT TRANSFER PROBLEMS IN AERO-ENGINES." In Archives of Heat Transfer. Washington: Hemisphere, 1988. http://dx.doi.org/10.1615/ichmt.1988.20thaht.300.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Mujumdar, Arun S. "HEAT TRANSFER PROBLEMS IN DRYING." In International Heat Transfer Conference 10. Connecticut: Begellhouse, 1994. http://dx.doi.org/10.1615/ihtc10.5290.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Yap, Y. F., and J. C. Chai. "Numerical methods for problems with moving interfaces and irregular geometries." In HEAT TRANSFER 2010. Southampton, UK: WIT Press, 2010. http://dx.doi.org/10.2495/ht100061.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kowalewski, Tomasz A., Andrzej Cybulski, and Tomasz Michalek. "Experimental benchmark for casting problems." In International Heat Transfer Conference 12. Connecticut: Begellhouse, 2002. http://dx.doi.org/10.1615/ihtc12.3580.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Polezhaev, Yury V., and Anatoly F. Polyakov. "Thermophysical Problems of Transpiration Cooling." In International Heat Transfer Conference 11. Connecticut: Begellhouse, 1998. http://dx.doi.org/10.1615/ihtc11.4160.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Petit, Daniel, and Richard Pasquetti. "REDUCTION METHOD FOR LINEAR THERMAL PROBLEMS." In International Heat Transfer Conference 9. Connecticut: Begellhouse, 1990. http://dx.doi.org/10.1615/ihtc9.2750.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kolenda, Zygmunt Szymon. "ON THE SOLUTIONS OP BOUNDARY AND INITIAL-BOUNDARY VALUE PROBLEMS WITH SUPPLEMENTARY DATA - THE OVERDETERMINED PROBLEMS." In International Heat Transfer Conference 8. Connecticut: Begellhouse, 1986. http://dx.doi.org/10.1615/ihtc8.210.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Szekely, Julian. "TRANSPORT PROCESSES IN AGITATED LADLES: PROBLEMS, SOLUTIONS, AND EXPERIMENTAL TECHNIQUES." In Archives of Heat Transfer. Washington: Hemisphere, 1988. http://dx.doi.org/10.1615/ichmt.1988.20thaht.240.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Szekely, Julian. "TRANSPORT PROCESSES IN AGITATED LADLES: PROBLEMS, SOLUTIONS, AND EXPERIMENTAL TECHNIQUES." In Archives of Heat Transfer. Connecticut: Begellhouse, 1988. http://dx.doi.org/10.1615/ichmt.1988.aht.240.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Heat transfer problems"

1

Martinez, Matthew, and Olivia Heiner. Conditional Generative Adversarial Networks for Solving Heat Transfer Problems. Office of Scientific and Technical Information (OSTI), September 2020. http://dx.doi.org/10.2172/1673172.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Glass, M. W. CHAPARRAL: A library for solving large enclosure radiation heat transfer problems. Office of Scientific and Technical Information (OSTI), August 1995. http://dx.doi.org/10.2172/120875.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Farnsworth, R. K., D. W. Faletti, and M. J. Budden. Application of the TEMPEST computer code to canister-filling heat transfer problems. Office of Scientific and Technical Information (OSTI), March 1988. http://dx.doi.org/10.2172/6960737.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Wilson, D. (Conference on free and moving boundary problems as related to heat transfer). Office of Scientific and Technical Information (OSTI), July 1987. http://dx.doi.org/10.2172/6821504.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Schwab, C., and I. Babuska. Subspace Correction Methods for the Iterative Solution of Hierarchic Plate Models. 1: Heat Transfer Problems. Fort Belvoir, VA: Defense Technical Information Center, April 1994. http://dx.doi.org/10.21236/ada285712.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Chan, B. Improved modeling and numerics to solve two-dimensional elliptic fluid flow and heat transfer problems. Office of Scientific and Technical Information (OSTI), May 1986. http://dx.doi.org/10.2172/5579622.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Brown, Garry L. Basic Research Problems in Mechanics and Heat Transfer for Integrally Woven, Transpiration Cooled Ceramic Composite Turbine Engine Combustor Walls. Fort Belvoir, VA: Defense Technical Information Center, June 2003. http://dx.doi.org/10.21236/ada414988.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

McHugh, P. R. An investigation of Newton-Krylov algorithms for solving incompressible and low Mach number compressible fluid flow and heat transfer problems using finite volume discretization. Office of Scientific and Technical Information (OSTI), October 1995. http://dx.doi.org/10.2172/130602.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Rightley, M. Multi-dimensional discrete ordinates solutions to combined mode radiation heat transfer problems and their application to a free-falling particle, direct absorption solar receiver. Office of Scientific and Technical Information (OSTI), November 1989. http://dx.doi.org/10.2172/5232064.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Wiser, Ralph, Emilio Baglietto, Arsen Iskhakov, Nam Dinh, Cheng-Kai Tai, Igor Bolotnov, Tri Nguyen, Elia Merzari, and Dillon Shaver. Challenge Problem 1: Preliminary Model Development and Assessment of Flexible Heat Transfer Modeling Approaches. Office of Scientific and Technical Information (OSTI), June 2022. http://dx.doi.org/10.2172/1881860.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Heat transfer problems' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography