Dissertations / Theses on the topic 'Hazardous wastes Victoria Management'
To see the other types of publications on this topic, follow the link: Hazardous wastes Victoria Management.
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 45 dissertations / theses for your research on the topic 'Hazardous wastes Victoria Management.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.
1
Kwok, Hon-chiu. "An overview of chemical waste management of printed circuit board manufacturing in Hong Kong /." Hong Kong : University of Hong Kong, 1996. http://sunzi.lib.hku.hk/hkuto/record.jsp?B17457348.
Full text
2
Zvinakis, Kristina. "Taxation, jurisdictions, and firm behavior : an empirical investigation of hazardous-waste taxes /." Digital version accessible at:, 1998. http://wwwlib.umi.com/cr/utexas/main.
Full text
3
Man, Yuk-lan Catherine. "Cyanide waste management : technologies, economic aspects, and constraints /." Hong Kong : University of Hong Kong, 1996. http://sunzi.lib.hku.hk/hkuto/record.jsp?B17665346.
Full text
4
Mbeki, Unathi Namhla. "Hazardous waste management at University of Limpopo (Turfloop Campus) : Is it managed according to legal standards?" Thesis, University of Limpopo (Turfloop Campus), 2009. http://hdl.handle.net/10386/607.
Full textAbstract:
Thesis (M.Phil. (Environmental Law and Management)) --University of Limpopo, 2009In this study hazardous waste is defined as well as its classes.The current status of hazardous waste management, available legislation,enforcement and minimum requirements are discussed.Hazardous waste chemicals produced at University of Limpopo (Turfloop Campus),their amounts and their management were determined.They are compared to minimum requirements from Department of Water Affairs and Forestry.Other Universities hazardous waste management programmes were looked at.
5
Marcinkiewicz, Thomas J. "Hazardous materials management in the city of Victoria, a team approach." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape11/PQDD_0006/MQ41809.pdf.
Full text
6
Lau, Kin-wah. "Management, disposal and recycling of waste organic solvents in Hong Kong /." Hong Kong : University of Hong Kong, 1998. http://sunzi.lib.hku.hk/hkuto/record.jsp?B19945139.
Full text
7
Tlhapane, Keatlaretse Kefilwe. "A case study exploring the level of awareness of NCP Chlorchem's staff of environmental costs associated with hazardous waste." Thesis, Rhodes University, 2014. http://hdl.handle.net/10962/d1015639.
Full textAbstract:
[Integrative executive summary] NCP Chlorchem (Pty) Ltd manufactures and distributes Chlor alkali products such as chlorine, hydrochloric acid, caustic soda flakes, etc. and in the process generates both hazardous and general waste. Following changes in South African waste management legislation in 2011, the organisation’s waste service provider had to increase the costs associated with the handling of site’s hazardous waste. Top management of NCP Chlorchem (Pty) Ltd requested a meeting with the waste service provider in order to establish the reasons behind the price increase. In that meeting, which the researcher attended, the waste service provider explained the changes in waste legislation and how it was going to impact on their business. Top management understood the reasons behind the price increase; however, they requested the waste service provider to review the price increase. The waste service provider gave the top management of NCP Chlorchem (Pty) Ltd assurance that they were going to discuss the price reduction request with their own senior management and would provide feedback. The researcher did not participate in the feedback meetings; however, to this day, NCP Chlorchem (Pty) Ltd still uses the services of the same waste service provider. The effect the escalating annual waste handling costs has had on NCP Chlorchem (Pty) Ltd’s management team led to the study. Environmental impacts have costs that directly impact on company’s bottom line, such as the costs associated with the generation of waste. Although environmental costs are only one of the many costs incurred by businesses, they deserve management’s attention. According to Jasch (2003), there is an apparent lack of awareness and understanding of the magnitude of the environmental costs generated by organisations, and many opportunities for cost savings through good environmental management are lost. However, using a relatively new tool in environmental management, that is, environmental management accounting (EMA), management would ensure that relevant and significant environmental costs are considered when making business decisions (Jasch, 2003). The main purpose of the thesis is to explore the level of awareness of environmental costs associated with hazardous waste within NCP Chlorchem (Pty) Ltd. In order to carry out the study, literature about environmental and cost accounting as well as literature on waste management was reviewed. Questionnaires were distributed to staff members, and meetings were held with different senior personnel. This case study seeks to answer the following questions: What is NCP Chlorchem (Pty) Ltd’s staff members’ level of understanding of waste management? What is the level of awareness of NCP Chlorchem (Pty) Ltd’s staff of environmental costs with regard to the generation, handling, transportation and disposal of hazardous waste? How can the current traditional accounting within the organisation be integrated with environmental management accounting? The findings of the first research objective revealed that staff members knew the site’s waste streams as per the South African legal definition of waste and as identified in the site’s environmental management system documentation. The conceptual approach to waste management is underpinned by the waste hierarchy. The respondents support the waste hierarchy in its approach to waste management, which is prevention of waste, reduction, reuse, recycle and safe disposal of waste as the last resort. Lack of awareness of environmental management, among other things, was cited as the cause of waste. In addition to that, the respondents believe the waste hierarchy can be achieved by employing recycling facilities, following procedures and by carrying out environmental awareness campaigns. Improving process design and control and including changes in raw material was cited, among other things, as the respondents’ perception on how waste can be reduced. The findings of the respondents’ understanding of waste hierarchy revealed that staff members understood waste management. The respondents cited the impacts of waste on the business as financial impact on the business, impact on their bonuses, and possible loss of business. In relation to the second research objective, it was found that staff members knew the hazardous waste streams and identified amongst other waste, sludge and chlorine emissions as NCP Chlorchem (Pty) Ltd’s hazardous waste. However, with regard to environmental management accounting data, an average of 55.1% of respondents were not familiar with the physical and monetary components of EMA. An average of 19.6% of respondents who were aware of EMA might have been senior personnel. It could further be established that those who were familiar with EMA information were actually working with the data, either for reporting purposes, or for employing waste minimisation strategies, as well as awareness purposes, to their juniors. On average, 80% of the respondents perceived the production department as the area within site that has the EMA information.
8
Sorenson, Mary T. "Deterministic vs probabilistic ecological risk assessment modeling at hazardous waste sites : a comparative case study." Thesis, Georgia Institute of Technology, 2000. http://hdl.handle.net/1853/25303.
Full text
9
Lui, Kon-hung. "A preliminary study of the management of toxic, hazardous and difficult household wastes in Hong Kong /." Hong Kong : University of Hong Kong, 1996. http://sunzi.lib.hku.hk/hkuto/record.jsp?B17457208.
Full text
10
文玉蘭 and Yuk-lan Catherine Man. "Cyanide waste management: technologies, economic aspects, and constraints." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1996. http://hub.hku.hk/bib/B31253507.
Full text
11
Tang, Kin-man Raymond, and 鄧健民. "A comparison of Hong Kong and overseas practice in special waste management." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2003. http://hub.hku.hk/bib/B31255632.
Full text
12
Scott, Denise Whittington. "An assessment of household hazardous waste collection." Thesis, Virginia Tech, 1987. http://hdl.handle.net/10919/44068.
Full textAbstract:
Many civic groups and local governments are involved in campaigns to safely collect and dispose of "household hazardous waste." Although it is difficult to define, household hazardous waste is generally considered to be any chemical waste generated in a family dwelling which, if disposed of improperly, may be harmful to human health or the environment. Growing concerns are centered around the disposal of these potentially toxic wastes by burying them in landfills or pouring them down drains or storm sewers.
The most popular method of addressing the problem of household hazardous waste is that of holding "collection days," at which householders are encouraged to bring their hazardous waste to some central location for proper handling by responsible authorities. Although the availability of information about the total costs of holding these collections days is presently limited, it is apparent that the expense per household served is quite high. Some people have questioned whether the expense is justified, since there has been little documentation of the risks associated with the handling of household hazardous waste in the municipal waste stream.
This thesis presents the findings to date of a study examining the quantities of household hazardous waste present in the municipal waste stream (in order to assess the risks associated with their disposal) and the costs associated with collection days. A telephone survey was used to develop a preliminary estimate of the nature and quantity of hazardous waste generated by households in a Virginia city. Cost data from collection days held in Virginia and elsewhere in the United States are documented and discussed.Master of Science
13
Lui, Kon-hung, and 呂幹雄. "A preliminary study of the management of toxic, hazardous and difficult household wastes in Hong Kong." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1996. http://hub.hku.hk/bib/B31253465.
Full text
14
Letsitsi, Ezekiel Tebogo. "Waste management in the pharmaceutical industry : an evaluation report of Dr Reddy's Laboratories." Thesis, Rhodes University, 2013. http://hdl.handle.net/10962/d1001872.
Full textAbstract:
The pharmaceutical industry must worry about managing pharmaceutical waste as it poses a health risk to human beings and its presence in the environment can also contribute to loss of biodiversity. Ngwuluka, Ochekpe, and Odumosu (2011: 11259) state that “Pharmaceuticals, though used to treat and manage diseases, are poisons, which justify the growing concerns about their presence in the environment.” Various forms of pharmaceutical waste exist, Ngwuluka et al. (2011) identified the following forms of pharmaceutical waste: Expired dosage forms, non-reworkable formulations, spilled pharmaceuticals, rejected active pharmaceutical ingredients, expired active pharmaceutical ingredients, and wastewater resulting from the water used for process operations during manufacturing and could come from the water used to clean equipment, pipes and floors, and would contain amongst other materials, chemicals and active pharmaceutical ingredients (APIs). A review on the pharmaceutical industry and the progress they have made in environmental management by generating health, safety and environmental programs, preventing pollution, waste minimization, recycling and reusing materials, investing in projects and facilities to ensure environmental sustainability have been established (Berry & Rondinelli, 2000). Dr. Reddy’s Laboratories is an Indian based pharmaceutical company which imports, markets and sells medicines in South Africa. Dr. Reddy’s has plans to set up a manufacturing plant in South Africa. The purpose of this study is to research waste management practices at Dr. Reddy’s plant in India and to draw parallels between India’s and South Africa’s waste legislation. This is to enable Dr. Reddy’s to review all aspects of its waste management systems, in order to revise where necessary and to improve the overall achievement of its waste management objectives in order to become a more sustainable organisation and to meet South African Waste legislation before setting up a plant in South Africa. 3 ii. Objective of the Evaluation Report The purpose of this research is to evaluate and analyse the development and implementation of a waste management system in a pharmaceutical company, specifically Dr. Reddy’s Laboratories. This is primarily to enable the company to review and analyse all aspects of waste management pertaining to pharmaceutical manufacturing and to revise or improve where necessary to ensure adherence to waste regulations as outlined by government. The following research goals have been also been identified: To identify and describe waste management practices at Dr. Reddy’s Laboratories, on the inherent assumption by the researcher that the company has a successful waste management strategy that would need to be reviewed to identify areas of improvement before expanding manufacturing facilities into South Africa. To evaluate, assess and compare similarities and/or differences between the identified South African Legislation for Waste Management with those identified during research conducted at Dr. Reddy’s iii. Importance of the Research Conducted Waste Management is important in that it not only removes from the environment, substances that can be harmful to humans and animals but it also enables an organisation to be more sustainable. According to Seadon (2010: i) “Integrated waste management is considered from a systems’ approach, with a particular emphasis on advancing sustainability”. The study will provide guidance to senior management, shop floor managers and employees who work in Dr. Reddy’s manufacturing plants as well as overall employees at Dr. Reddy’s on how to successfully implement a Waste Management programme to enhance sustainability at the organisation and realise the benefits to the organisation of being more sustainable. Weybrecht (2010) identified the following benefits that companies could gain by adopting sustainable waste management practices: reduced costs, resource preservation, keeping up with legislation, enhanced reputation, business differentiation from competitors, and attraction and retention of quality employees, and customer need satisfaction amongst many other benefits. This research needs to address the gap in analysing waste management practices (with more emphasis on waste treatment, waste minimisation, re-use, recycling and disposal), and implementation and understanding of waste management in the pharmaceutical industry as prior research was done mostly in other chemical industries and not to a large scale in the pharmaceutical industry. South African Waste Legislation, Indian Waste Legislation (as Dr. Reddy’s is based in India), as well as International Pharmaceutical Waste Management Guidelines, and International Pharmaceutical Good Manufacturing Practices provide a framework and benchmark of leading pharmaceutical waste management practices that can guide Dr. Reddy’s Laboratories’ leadership into integrating their waste management practices into their plans of setting up a manufacturing plant in South Africa. 5. Research Methodology This is evaluation research in the form of a case study and the data collection method employed is the conduction of a survey through questionnaires. The evaluation research also involves a document analysis of the organisation’s 2011 and 2012 annual reports, Dr. Reddy’s 2010 Sustainability Report as well as literature compiled by the organisation’s Corporate Communications Division. The research would also include review of existing literature on waste management. v. Structure of Dissertation This dissertation consists of three sections. Section 1: The Evaluation Report The section introduces the research area, provides the objectives of the research, provides contextual background information and describes the rationale for conducting the research. This section further describes Dr. Reddy’s waste management practice as outlined in relevant company documentation; it is also intended to highlight the specific waste management processes that were followed in the formulation and implementation of the waste management strategy. This section further describes the sample and presents the results of the survey, where the results are collated and reviewed in the context of the criteria set in the South African Waste Legislation, Indian Waste Legislation, as well as in International Pharmaceutical Waste Management Guidelines, and International Pharmaceutical Good Manufacturing Practices. The overall findings of this case study suggest that although management at Dr. Reddy’s are satisfied with waste management practices and results achieved at it manufacturing plant, there is however dissatisfaction amongst employees who believe the organisation has not successfully disseminated information and sufficiently trained them on waste management policies, processes and practices. There is therefore a desire amongst employees to be trained and to see the company improve on its waste management processes, this desire is a very important attribute as it indicates that employees at Dr. Reddy understand and are committed to the importance of waste management. Future research should be conducted to measure the legal impact of non-compliance to legislation governing waste management in the pharmaceutical company. Section 2: Literature Review The objective of the literature review is to provide a critical assessment and evaluation of previous research in the field of waste management in general as prior research was done mostly in other industries and not to a large scale in the pharmaceutical industry. The literature review evaluates the key elements of an effective waste management strategy implementation and is followed by a review of literature pertaining to the description of Pharmaceutical waste. Section 3: Research Methodology This section presents a description of how the work in this research was conducted. It presents the research process followed in compiling this case study, represented by the aims and objectives, research methodology and design, data collection techniques and data analysis.
15
Maseko, Qondile. "Critical evaluation of medical waste management policies, processes and practices in selected rural hospitals in the Eastern Cape." Thesis, Rhodes University, 2014. http://hdl.handle.net/10962/d1013107.
Full textAbstract:
This thesis critically evaluates the policies, processes and practices of medical waste management in selected rural hospitals in the Eastern Cape. Medical Waste Management is a growing public health and environmental issue worldwide. Research shows large scale incapacity in dealing with medical waste in an efficient and sustainable fashion globally, which demonstrates that it is not merely a developing world problem alone. This study is conducted against the backdrop of an increasing medical waste crisis in South Africa. Although there are an abundance of studies on solid waste management, there is a lack of data and research particularly on medical waste management in rural hospitals. The crisis of medical waste management in South Africa is closely intertwined with the collapsing health care system and an overburdened natural environment. It is an undisputable fact that South Africa’s generation of medical waste far exceeds its capacity to handle it effectively. This thesis argues that the neglect of medical waste as an environmental-health issue and the absence of an integrated national medical waste management plan aggravate the medical waste problem in the country. In explaining the medical waste crisis, this thesis adopts a Marxist perspective which is based on the premise that industrial capitalist societies place economic growth and production at high priority at the expense of the natural environment; creating a society that is engulfed by high health risk due to the generation of hazardous and toxic waste. Industrial societies view themselves as superior and separate from the natural environment, whereas one cannot separate nature from society as they are interlinked. As society attempts to adopt a sustainable environmental approach towards environmental management, science and technology are enforced as a solution to environmental problems in order to continue developing countries’ economies whilst sustainably managing and protecting the environment, which is contradictory. This thesis emphasises that medical waste management is a socio-political problem as much as it is an environmental problem, hence the need to focus on power relations and issues of environmental and social justice. The results of the study identified gaps in policy framework nationally and institutionally on medical waste management. In addition, there were poor waste management practices due to poor training, inadequate infrastructure and resources as well as poor budget support.
16
Kummer, Katharina. "The Basel Convention and related international legal rules : towards a comprehensive global regulatory system for the management of hazardous wastes?" Thesis, Queen Mary, University of London, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.309610.
Full text
17
Lau, Kin-wah, and 劉健華. "Management, disposal and recycling of waste organic solvents in Hong Kong." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1998. http://hub.hku.hk/bib/B31254056.
Full text
18
Kwok, Hon-chiu, and 郭漢超. "An overview of chemical waste management of printed circuit board manufacturing in Hong Kong." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1996. http://hub.hku.hk/bib/B31253428.
Full text
19
Sattar, Mohamed Shaheen. "An environmental impact perspective of the management, treatment, and disposal of hazardous pharmaceutical compounds generated as medical waste at selected hospitals in Cape Town, South Africa." Thesis, Cape Peninsula University of Technology, 2011. http://hdl.handle.net/20.500.11838/2012.
Full textAbstract:
Thesis (MTech (Environmental Health))--Cape Peninsula University of Technology, 2011.Pharmaceuticals have been formulated to influence physiological systems in humans, animals, and microbes but have never been considered as potential environmental pollutants by healthcare professionals. The human body is not a barrier to chemicals, but is permeable to it. Thus after performing their in-vivo functions, pharmaceutical compound introduced into the body, exit mainly via urine and faeces. Sewage therefore contains highly complex mixtures of chemicals in various degrees of biological potency. Sewage treatment works including those in South Africa, on the other hand, are known to be inefficient in removing drugs from sewage and consequently either the unmetabolised pharmaceutical compounds or their metabolites emerge in the environment as pollutants via several trajectories. In the environment, the excreted metabolites may even undergo regeneration to the original parent molecule under bacterial influence, resulting in "trans-vivo-pharmaceutical-pollution-cycles". Although all incinerators are known to generate toxins such dioxins and furans from the drugs they incinerate, all the medicines disposed by the hospitals under research, were incinerated, as the preferred option of disposal. The incineration process employed was found to be environmentally unsafe. Expired and unused medicines which the general public discard as municipal solid waste become landfilled. Because many landfill sites are not appropriately engineered, the unwanted drugs landfilled therein, leach into the surrounding ground water, which is the influent source of water treatment plants. Water treatment plants, including those in South Africa, are also inefficient in eliminating pharmaceutical compounds, releasing them in sub-therapeutic concentrations into potable tap water as pollutants, the full effects of which are yet to be determined.
20
Günther, Wanda Maria Risso. "Gerenciamento de resíduos de serviços de saúde: a caracterização como instrumento básico para abordagem do problema." Universidade de São Paulo, 1993. http://www.teses.usp.br/teses/disponiveis/6/6134/tde-04042012-114301/.
Full textAbstract:
A problemática que envolve os resíduos de serviços de saúde vem ganhando espaço na mídia internacional a partir dos inúmeros acidentes ocorridos envolvendo resíduos desta natureza, como é o caso do incidente ocorrido nas praias de New Jersey e New York, no verão de 1988, ou mesmo o acidente radiativo ocorrido em Goiânia. Tais eventos provocaram grande reação na opinião pública preocupada com sua disposição inadequada, fato agravado com o advento da AIDS e sua rápida proliferação. A estratégia de gerenciamento utilizada para os resíduos perigosos, que segue os resíduos desde sua geração até seu destino final, mostra-se adequada também a resíduos de serviços de saúde. Da mesma forma a segregação na origem e a minimização são possíveis, baseando-se numa caracterização prévia que leve em consideração o risco potencial de infecção e possibilite, mediante uma graduação do risco inerente, uma classificação em distintas categorias. Este trabalho propõe, mediante revisão bibliográfica, levantar as polêmicas e as visões divergentes sobre o tema. Sugere uma proposta de metodologia para caracterização biológica e mostra suas dificuldades de implementação. Apresenta a caracterização destes resíduos como instrumento básico para se efetuar seu gerenciamento, o qual permitirá a minimização dos riscos ocupacionais, sanitários e ambientais devidos a este tipo de resíduos. Finalmente analisa criticamente os distintos trabalhos executados nos países latino-americanos, nos últimos vinte anos, sobre caracterização de resíduos hospitalares, ressaltando a metodologia empregada e os resultados a que chegaramMedical wastes have been given much space in the international midia, along with several disasters involving these wastes which occurred lately, namely the disaster at New Jersey and New York beaches, in the summer of 1988, or even the one occurred in Goiania, involving radioactive materials. These events brought about the concern of the public opinion with the inadequate disposal of theses wastes, specially when AIDS and its spreading is a reality. The management strategy used for hazardous wastes, which is, to track the waste from its generation to its final disposal, shows also adequate for medical wastes. Segregation at source and minimization also possible based on a previous characterization which includes both the potencial infection hazard and the classification of these wastes into categories of scaled inherent risks. The study presents a survey carried out on international literature to point out the different viewpoints and the controversial aspects of the matter. It suggests a methodology for the biological characterization of the wastes and points out the difficulties in implementing it. It states the characterization of the waste as a mean of providing the management of these wastes, with minimization of occupational, sanitary and environmental hazards. Finally, it critically analyses similar surveys performed in Latin America countries during the last twenty years, about characterization of hospital wastes, emphasizing the adapted methodology and the results obtained
21
Sattar, Shaheen. "An environmental impact perspective of the management, treatment, and disposal of hazardous compounds generated as medical waste at selected hospitals in Cape Town, South Africa." Thesis, Cape Peninsula University of Technology, 2013. http://hdl.handle.net/20.500.11838/802.
Full textAbstract:
Thesis (MTech(Environmental Health))--Cape Peninsula University of Technology, 2011.Pharmaceuticals have been formulated to influence physiological systems in humans, animals, and microbes but have never been considered as potential environmental pollutants by healthcare professionals. The human body is not a barrier to chemicals, but is permeable to it. Thus after performing their in-vivo functions, pharmaceutical compound introduced into the body, exit mainly via urine and faeces. Sewage therefore contains highly complex mixtures of chemicals in various degrees of biological potency. Sewage treatment works including those in South Africa, on the other hand, are known to be inefficient in removing drugs from sewage and consequently either the unmetabolised pharmaceutical compounds or their metabolites emerge in the environment as pollutants via several trajectories. In the environment, the excreted metabolites may even undergo regeneration to the original parent molecule under bacterial influence, resulting in “trans-vivo-pharmaceutical-pol ution-cycles”. Although all incinerators are known to generate toxins such dioxins and furans from the drugs they incinerate, all the medicines disposed by the hospitals under research, were incinerated, as the preferred option of disposal. The incineration process employed was found to be environmentally unsafe. Expired and unused medicines which the general public discard as municipal solid waste become landfilled. Because many landfill sites are not appropriately engineered, the unwanted drugs landfilled therein, leach into the surrounding ground water, which is the influent source of water treatment plants. Water treatment plants, including those in South Africa, are also inefficient in eliminating pharmaceutical compounds, releasing them in sub-therapeutic concentrations into potable tap water as pollutants, the full effects of which are yet to be determined.
22
Cunha, Carlos Eduardo Soares Canejo Pineiro da. "Gestão de resíduos perigosos em refinarias de petróleo." Universidade do Estado do Rio de Janeiro, 2009. http://www.bdtd.uerj.br/tde_busca/arquivo.php?codArquivo=9132.
Full textAbstract:
Diferentes etapas do refino do petróleo resultam na geração de resíduos oleosos que possuem em sua composição substancias que imprimem periculosidade aos mesmos, que, caso venham a contaminar o solo, podem impactar a biota da área, atingir os lençóis freáticos, rios e lagos da região, agredindo diretamente ou indiretamente a saúde humanae gerando custos ambientais, sociais e monetários muito altos. O objetivo do presente trabalho foi avaliar a gestão dos resíduos sólidos perigosos gerados na atividade de refinarias de petróleo no Brasil, descrevendo processos, caracterizando a geração dos mesmos em cada etapa do refino e avaliando técnicas de tratamento e de destinação final. Ao longo do texto, foram abordados conceitos de gestão ambiental e de logística reversa, com o objetivo de ressaltar benefícios ambientais e sócio- econômicos advindos de umatravés do processo de gestão. Sobre a gestão dos resíduos, são apreciados os conceitos básicos desta, compondo-se uma abordagem prática e simplificada, sendo avaliadas estratégias de minimização de resíduos com base nos 3Rs, algumas metodologias de tratamento e a utilização de aterros industriais como local de destinação final para os resíduos. Para a estruturação da dissertação proposta, foi executada uma revisão bibliográfica, além da construção de uma linha de coesão entre os objetos estudados. Conclui-se que atualmente não existe metodologia de gestão tão eficiente que seja totalmente sustentável, nem gestão que possa ser baseada em apenas uma prática ou metodologia. A integração de conceitos e práticas, incluindo programas de minimização de resíduos, logística reversa, tratamento e destinação final faz-se necessária para uma gestão mais eficiente dos resíduos oleosos. Porém, deve-se destacar as novas oportunidades gerenciais associadas à logística reversa, bem como a necessidade de utilização dos aterros industriais em alguma etapa da gestão, assim como a atual tendência à adoção do co-processamento como metodologia de tratamento que apresenta a melhor relação custo x benefício para a gestão dos resíduos perigosos gerados nas refinarias de petróleo.Different stages of the petroleum refining generate oil wastes that have hazardous substances. When oil waste contaminates the soil it may cause impacts on living resources, reaching groundwater, rivers and lakes in the region, affecting directly or indirectly the human health, with environmental, social and economic costs that can be very high. The objective of this study was to assess the management of hazardous solid wastes generated at petroleum refineries, describing processes and characterizing the way these wastes are generated in different stages of the refining process. The study also included assessment of treatment options and final disposal strategies. Principles of environmental management and reverse logistics were addressed with the objective of highlighting the environmental and socio-economic benefits added by a suitable management scheme. The basic concepts related to solid waste management are discussed in a practical and simplified language, and the minimization strategies are evaluated based on 3Rs principle. Treatment methodologies and the relevance of utilizing industrial landfills as final disposal solution are presented. Besides the literature survey, the construction of a red thread connecting the issues is presented. It was concluded that currently, there is no management scheme for oil waste efficient enough to be considered sustainable, neither management option that can be based on a single technology or methodology. An integration of concepts and different practices including waste minimization, reverse logistics, treatment and final disposal is needed in order to achieve a more efficient oil waste management. However, it is worth to highlight new managerial opportunities related to reverse logistics, as well as the need to make use of industrial landfills in some point of the process and the current trend of co- processing as the option that presents the best cost-benefit for management of oil hazardous wastes generated by petroleum refineries.
23
Manfredini, Kira Lusa. "Estado atual e propostas de melhorias no gerenciamento em resíduos de glutaraldeído, xileno e formaldeído em um hospital escola e em um laboratório universitário de anatomia." reponame:Repositório Institucional da UCS, 2014. https://repositorio.ucs.br/handle/11338/937.
Full textAbstract:
O presente trabalho visa contribuir para o encaminhamento de soluções, relativas ao gerenciamento de resíduos químicos em instituições de ensino e pesquisa e hospitalares. Estas instituições atuam, ou pelo menos devem atuar, como modelos das políticas de preservação ambiental e prevenção de riscos à saúde, com práticas sustentáveis e respaldadas nas normas vigentes, contribuindo para a formação de cidadãos comprometidos com a saúde ambiental e a qualidade de vida. O objetivo principal do trabalho foi caracterizar os compostos glutaraldeído, xileno e formaldeído, após o uso, oriundos de atividades de ensino e assistência à saúde, com vistas a propor melhorias no sistema de gerenciamento dos mesmos. A primeira etapa do trabalho envolveu o levantamento dos resíduos químicos gerados no hospital escola, em especial o xilol e o glutaraldeído, e no laboratório universitário de anatomia, especificamente o formaldeído em uso, quantificando-os e identificando o local de geração. Também foram avaliados o processo e o tratamento aplicados atualmente a cada um desses resíduos. Para a análise cromatográfica foram coletadas oito amostras mensais de glutaraldeído e xilol pós-uso no hospital escola e uma amostra de cada um dos cinco tanques em uso no laboratório universitário de anatomia, totalizando 16 amostras no hospital e 40 amostras no laboratório de anatomia. As degradações do glutaraldeído, xilol e formol foram de 9,19, 1,52 e 59,38 %, respectivamente. Como alternativa ao descarte convencional dos compostos de interesse sugere-se a reciclagem de solventes orgânicos. São apresentados também possíveis substitutos ao glutaraldeído, xilenos e formaldeído e uma proposta de melhorias de gerenciamento das substâncias.Submitted by Ana Guimarães Pereira (agpereir@ucs.br) on 2015-05-11T17:15:43Z No. of bitstreams: 1 Dissertacao Kira Lusa Manfredini.pdf: 2848598 bytes, checksum: 905fd594245f899daa737e6bb80b6aa8 (MD5)
Made available in DSpace on 2015-05-11T17:15:43Z (GMT). No. of bitstreams: 1 Dissertacao Kira Lusa Manfredini.pdf: 2848598 bytes, checksum: 905fd594245f899daa737e6bb80b6aa8 (MD5)
The present work aims to contribute to finding solutions concerning the management of chemical waste in universities, research institutions and hospitals. These institutions act, or at least should act as models of policies for environmental preservation and prevention of health risks, supported in the current regulations, contributing to the formation of citizens committed to environmental health and quality of life. The main objective of the present work was propose alternatives for the current chemical waste management system, particularly the compounds glutaraldehyde, xylene and formaldehyde after use, in a higher education institution and in a hospital school, in order to support decision-making as to minimize the risks to human and environmental health from the use and disposal of the same. The first step of the study involved a survey of chemical waste generated in the hospital school, especially xylene and glutaraldehyde, and in the university laboratory of anatomy, especially formaldehyde in use, quantifying them and identifying the generation site, and the process and the treatment currently applied to each one of these residues, through local direct observations and survey information from the Environmental Sanitation Institute of the Caxias do Sul University. The next step was the characterization compounds glutaraldehyde, xylene and formaldehyde as the purity (compared to standard substances) in order to analyze the degradation by use and the need ou not of disposal. For this purpose were collected 8 monthly samples of glutaraldehyde and xylene, after use in the hospital school, and formaldehyde in the university laboratory of anatomy. Were present two proposals: a review of the current method of disposal of the compounds glutaraldehyde, xylene and formaldehyde and the replacement thereof by other, smaller environmental impact and health, analyzing advantages and disadvantages of proposals, based on the literature, studies and practices carried out by other institutions. The chromatographic analyzes showed that the compounds glutaraldeyde and xylene have very purity (only 9.19 and 1.52 % of degradation, respectively) and can be reused by the institution, while formaldehyde degradation was high (59.38 %). The proposed alternatives prove to be very advantageous, according to the results obtained in the present study. The recycling of the compounds evaluated, in turn, implies directly in reducing the volume of toxic and hazardous materials that the institution sends to the final disposal.
24
Fransson, Lovisa. "Wasting our future by wasting the Sea : How to combat marine pollution from land-based sources on international and regional level." Thesis, Uppsala universitet, Juridiska institutionen, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-409779.
Full textAbstract:
In the United Nations Convention on the Law of the Sea, the environmental protection of the marine environment was first addressed in a comprehensive manner on an international level. However, the Convention distinguishes between four different sorts of pollution depending on which source the pollution originates from. Still, one of these sources play a more crucial role in the protection of the marine environment than the other since that source is estimated to stand for 80 percent of all the marine pollution; namely marine pollution from land-based sources. As the throw-away culture has led to products being disposed of at a faster rate than ever before, in particular plastic products, the amount of land-based debris has also substantially increased over the last decades. This increased disposal rate of products in combination with poor waste treatment has consequently led to many kinds of wastes ending up in the ocean and causing severe harm, not only to the marine environment and its living species, but also to humans that eat the fish and use the many other ecosystem services of the Sea. In this thesis, some prominent international conventions on marine pollution from land-based sources are examined; namely the United Nations Convention on the Law of the Sea, the Basel Convention on the Control of Transboundary Movements of Hazardous Wastes and their Disposal, as well as the Stockholm Convention on Persistent Organic Pollutants. To achieve United Nations Sustainable Development Goal number 14.1 to significantly reduce marine pollution from land-based sources by 2025, this thesis claims that international laws addressing this sort of pollution need to be implemented. Moreover, this thesis rests on the belief that regional implementation is a crucial component in making states align with international law. However, while regional implementation has been ambitious in the European Union Law, many regions still lack enforceable frameworks that aim to reduce and prevent marine pollution from land-based sources.
25
Triyono, Haryanto. "Towards environmentally sound management of hazardous wastes in Indonesia an overview of international law and North American practices /." 1990. http://catalog.hathitrust.org/api/volumes/oclc/33084879.html.
Full text
26
Rajamani, Kamala. "International trade in hazardous wastes an empirical analysis /." 1995. http://catalog.hathitrust.org/api/volumes/oclc/38187642.html.
Full text
27
Like, David E. "Management of chromium wastes in industry." Thesis, 1991. http://hdl.handle.net/1957/37990.
Full textAbstract:
Chromium hydroxide sludge is the end product of the
aluminum phosphate coating process used by a truck manufacturer
in the Pacific Northwest. This sludge is listed as an (F019)
hazardous waste by the Environmental Protection Agency, and
must be landfilled in a hazardous waste landfill site. The purpose
of this thesis is to evaluate the characteristics of this sludge,
and to then recommend suitable methods for handling and
disposal. The chemical analysis of the sludge found total
chromium to be 5.4% by weight. Industrial hygiene monitoring
found the highest concentrations of 0.002 mg/m3 total chromium
and 0.00006 mg/m3 hexavalent chromium at the waste treatment
plant. The eight hour permissible exposure limit for total
chromium is 0.5 mg/m3 and 0.05 mg/m3 for hexavalent chromium.
Given the chemical analysis and industrial hygiene monitoring, a
management plan is proposed for this truck manufacturer that
discusses possible options for handling the (F019) waste, and
provides a cost analysis for each of the options. The options that
were investigated were onsite treatment, recycling, no change,
and delisting. Onsite treatment was not required since the sludge
passed the TCLP extraction test. Recycling costs were
determined by contacting four recycling firms. Costs were found
to be $600/ton and above, which exceeded the current disposal
costs of $466/ton. Delisting the sludge from the hazardous
waste listing was determined to be the most feasible from a
management, cost, and environmental standpoint. Delisting would
reduce the costs of handling the waste, would allow a reduction
in landfilling costs, and reduce recycling costs.
A literature survey provides background information on
industrial uses of chromium, health problems associated with
chromium, and discusses the regulations that govern disposal of
these chromium sludges.Graduation date: 1991
28
倪炳雄. "A study on treatment and management for hazardous wastes generated from laboratories." Thesis, 2002. http://ndltd.ncl.edu.tw/handle/96858437786087626117.
Full text
29
Gebrewold, Fetene. "Descriptive study of current practices of hazardous waste management among identified small quantity generators in Benton County." Thesis, 1993. http://hdl.handle.net/1957/36811.
Full textAbstract:
Current evidence suggests that development and industrialization has engendered
the manufacture and use of chemical products which may harm human health
and degrade the environment. One of the most pressing environmental needs since
World War II is perhaps the issue of how society either manages or mismanages hazardous
wastes. The purpose of this study was to assess current management and
disposal practices among Small Quantity Generators (SQG) and Conditionally Exempt
Generators (CEG) in Benton County, Oregon. Study objectives included identification
of the number of registered and nonregistered SQGs and CEGs, identification
of the types of businesses, estimation of the quantities of hazardous wastes produced
and used, and assessment of current levels of awareness among generators of
hazardous wastes of pertinent regulations and safe environmental practices. A survey
instrument was used to collect data during in-person interviews with representatives
from a total of 48 businesses in Benton County.
Findings indicated that the majority of both the registered (70%) and nonregistered
(72.2%) businesses performed cleaning and degreasing activities at their business
locations. Other activities, in order of importance, included fabrication, retail
sales, manufacturing, and painting. With respect to the types of wastes produced or
used, the majority of the respondents indicated the production or use of waste oils
and aqueous liquids. Similarly, the majority of registered businesses (96.7%) indicated
that they provided employee training in hazardous waste management. Asked to
identify their method of disposal, both SQG and CEG respondents listed return to
supplier, recycle on-site, treatment, storage and disposal facilities, garbage/landfills,
evaporation, and sales of wastes, in order of importance, as their preferred method
of disposal. Most of the respondents indicated that their principal recycled wastes
were solvents and oils, followed by refrigerated gases and other products.
The study also considered the influence of state and federal laws and regulations
as applied to hazardous wastes, and whether or not these administrative rules
created a problem for Benton County businesses. In contrast to prior studies which
have indicated that among most businesses federal and state laws and regulations
were regarded as too complex and inflexible, or who complained that lack of access
to information or lack of time to remain informed served as significant constraints
upon their ability to comply, the majority of Benton County businesses indicated "no
problem" with the administrative rules.
The conclusion of the study was that an overall comparison of Benton County
SQGs and CEGs does not provide clear and convincing evidence that nonregistered
businesses, by virtue of the regulatory exemption, practice illegal hazardous waste
disposal and management procedures to a greater degree than the more fully regulated
registered business.Graduation date: 1993
30
Thorpe, Bradley Kevin. "Evaluating the quality of EIA scoping reports associated with hazardous waste management activities in South Africa." Thesis, 2014. http://hdl.handle.net/10210/11408.
Full textAbstract:
M.Sc. (Environmental Management)The minimum requirements for environmental impact assessment (EIA) in South Africa are prescribed in the 2010 EIA Regulations under the National Environmental Management Act (Act No. 107 of 1998) [NEMA]; where EIA is used as a decision-support tool by competent authorities in evaluating the environmental authorisation applications of activities likely to have adverse environmental impacts. Regulations under the National Environmental Management: Waste Act (Act No. 59 of 2008) [NEM:WA] define the nature and thresholds of those waste management activities for which environmental authorisation, in the form of a waste management licence, is required. The aforementioned regulations make a distinction between Category A activities and Category B activities; where an application for authorisation for Category B activities needs to be supported by a comprehensive Scoping and EIA (SIA) process undertaken by an independent environmental assessment practitioner (EAP). With the exception of the disposal of general waste to land, Category B activities relate to hazardous waste storage, treatment, reuse, recycling, recovery and disposal. The above-mentioned SIA process is implemented in two distinct phases, the first of which is the scoping phase; which aims to identify the key potential impacts that could be realised from a development proposal and to set the terms of reference for the subsequent EIA phase. Scoping thus aims, inter alia, to ensure that the overall EIA is undertaken in an efficient and effective manner, with emphasis on identification of impacts of potential significance. By using a modified version of the South African adapted Lee and Colley (1992) Review Package, this dissertation presents the findings of an evaluation of the quality of hazardous waste-related Scoping Reports prepared in South Africa. A sample of 20 Scoping Reports was assessed using the aforementioned review package. The results indicated that 75% of Scoping Reports were undertaken satisfactorily in terms of overall quality. Conversely, 25% of these reports were deemed to be of an unsatisfactory quality, with 10% having been very poorly attempted and deficient in many material respects. This is concerning in respect of the sectoral focus (hazardous waste management) of this research; where by definition, owing to the inherent physical, chemical or toxicological characteristics, the handling of hazardous waste may have a significant detrimental impact on human health and the environment if managed inappropriately.
31
Nayager, Dan. "Safety and operational risks at a selected chemical company." Thesis, 2007. http://hdl.handle.net/10321/2190.
Full textAbstract:
Submitted in partial fulfillment of the requirements for the degree of Masters in Technology: Business Administration, Durban University of Technology, 2007.Unsafe incidents are a regular occurrence in the chemical industries, which have resulted, in some cases in the catastrophic destruction to the environment and loss of life. Major global organizations have shut down after experiencing fatal unsafe incidents as in the case of Union Carbide. This organization was closed after the Bhopal incident in India, in 1984, which claimed the lives of a-bout three thousand residents (see appendix d). In this study, the safety and operational risks at a selected chemical company in Durban are researched. This study looks at the huge number of unsafe incidents in a three year period, from (2003) to year (2005), that occurred at this organization. The objective of this study is to identify the variables that contribute to the high number of unsafe incidents within the organisation. The study will focus on the relationship between staff perceptions and management's assumptions of these contributory variables. The sub-objectives of the study are: o To ascertain staff perceptions of the contributors to the incidents and unsafe working conditions; o To determine if management is accurate in their assumptions of the causes for the incidents; and o To determine relationships between staff perceptions and actual causes of the incidents. The contributors were themed in the study in the following manner: o Behaviour and attitude; e Communications; e Plant and equipment; e Training and development; o Planning and workload; o Safety aspects; and e Other related aspects. Implementing the recommendations made will assist in reducing the number of unsafe incidents and make the organization a safer place for all stakeholders.
M
32
Gaurave, Kumar. "Characterization And Lime Stabilization Studies On Artificially Lead Contaminated Soils." Thesis, 2010. http://etd.iisc.ernet.in/handle/2005/1268.
Full textAbstract:
Hazardous waste substances are solid, semi-solid or non-aqueous liquids that exhibit characteristics of corrosivity, reactivity, ignitability, toxicity and infectious property. Major available options for management of hazardous waste include direct disposal into landfill or chemical treatment/stabilization of wastes prior to landfill disposal. Hazardous wastes are accepted for direct disposal in engineered landfills if they conform to the chemical concentration limit criterion (determined by water leach test followed by estimation of the concentration of the contaminant) and compressive strength (the material should have compressive strength > 50 kPa) criterion. Lead is classified as extremely toxic metal. Elevated levels of lead in water (surface and ground water) primarily arise from industrial discharges, and aerial deposition. During its residence in surface water bodies, the lead may interact detrimentally with aquatic life or be abstracted into public water supplies. According to National drinking water standards, the permissible limit of lead in drinking water is 0.05 mg/l. Deposition of air-borne lead, disposal of sewage sludge on land and disposal of industrial effluents on lands are major sources of lead contamination of soils. When incorporated in soil, lead is of very low mobility. Lead retained in soils can be slowly leached to the groundwater thereby impacting human health if consumed for potable needs. Alternatively lead deposited in soils can be absorbed by vegetation (crops/trees) and can impact human health on their consumption. Given the negative impacts of lead contamination on human health, the strong affinity of soils to retain deposited lead and the possible release for human consumption, this thesis focuses on characterization and chemical stabilization of artificially lead contaminated soils in the context of their disposal in hazardous waste landfills.
The main objectives of the thesis are: characterize artificially lead contaminated soils for water leachability of lead and undrained strength characteristics as per CPCB (Central Pollution Control Board) guidelines in the context of disposal criteria in hazardous waste landfills. Artificially lead contaminated soils in compacted and slurry states are used in the thesis. Red soil (from Bangalore District, Karnataka) and river sand are used in the preparation of compacted and slurry specimens. The red soil and red soil-sand specimens are artificially contaminated in the laboratory by employing aqueous lead salt solutions as remolding fluids. Lead concentrations of 160 to 10000 mg/l are used in this study. The results of characterization studies with artificially lead contaminated soils help identify contaminated soil materials that require chemical stabilization prior to disposal into engineered landfills. Based on the results of characterization studies with artificially lead contaminated soils, lime stabilization coupled with steam curing technique is resorted to immobilize lead in the red soil-sand slurry specimens and mobilize adequate undrained strength to meet the criteria for disposal of lead contaminated soils in hazardous landfills.
After this first introductory chapter, a detailed review of literature is performed towards highlighting the need to undertake chemical stabilization of artificially lead contaminated soils in Chapter 2.
Chapter 3 presents a detailed experimental program of the study.
Chapter 4 presents the physico-chemical and mechanical characterization of the artificially lead contaminated soils. The ability of artificially contaminated soils to release (artificially added) lead during water leaching is explained using lead speciation results performed using the Visual MINTEQ program. Experimental results illustrated that contamination of compacted red soil and red soil + sand specimens with significant lead concentrations (21 to 1300 mg/kg) resulted in major fractions of the added lead being retained in the precipitated state. Results of water leach tests revealed that lead concentrations released in the water leachates are far less than (0.0011 to 0.48 mg/l) limits prescribed by CPCB (2 mg/l) for direct disposal of lead contaminated materials into hazardous waste landfills. Unconfined compressive strengths developed by the lead contaminated red soil and red soil-sand specimens were significantly higher (100-2700 kPa) than the strength requirement (> 50 kPa) for direct disposal of hazardous wastes in engineered landfills. Lead contamination did not affect the unconfined compression strengths of the specimens as matric suction prevalent in the unsaturated compacted soils had an overriding influence on the cementation bond strength created by the lead precipitates. Visual Minteq tool was helpful in predicting the amount of added lead that was converted to insoluble precipitate form. However the amounts of water leachable lead determined experimentally and predicted by Visual Minteq were very different-Visual Minteq predicted much higher amounts of water leachable lead than experimentally determined.
Experimental results revealed that the levels of lead released by the red soil-sand slurries in water leach tests were in excess (13 to 36 mg/l) of the permissible lead concentration (2 mg/l) for direct disposal of hazardous waste in landfills. Owing to water contents generally being in excess of their liquid limit water contents (w/wL ratio > 1) the slurry specimens exhibited undrained strengths below 1 kPa. Lime stabilization and steam curing of the contaminated slurry specimens was therefore resorted to control the leachibility of lead and increase undrained strengths to acceptable limits.
Chapter 5 deals with lime stabilization of artificially contaminated slurries that do not meet the leachate quality (lead concentration in water < 2 mg/l) or compressive strength (> 50 kPa). Procedures are evolved for lime stabilization of such artificially contaminated soils to meet both the water leachate quality and compressive strength criteria. Lime stabilization together with steam curing of the lead contaminated slurry specimens effectively immobilized the added lead (2500 mg/kg) and imparted adequate compressive strengths to the contaminated red soil-sand slurry specimens. The lime stabilized contaminated specimens released marginal lead concentrations (0.03 to 0.45 mg/l) in the water leach; these values are much lower than permissible limit (2 mg/l) for disposal in hazardous landfills or values exhibited by the unstabilized specimens (13 to 38 mg/l). Lime addition rendered the contaminated specimens strongly alkaline (pH values ranged between 10.68 and 11.66). Combination of the experimental and Visual Minteq results suggested that precipitation of lead as hydrocerrusite in the alkaline environments (pH 10.68 to 11.95) is not the sole factor for marginal release of lead in water leach tests of the 4, 7 and 10 % lime stabilized contaminated specimens. It is possible that fraction of lead ions are entrapped within the cemented soil matrix. Water leach tests performed at range of pH values (pH 2.5 to 9.6) with 7 % lime stabilized specimens suggested that immobilization of lead as hydrocerrusite or as entrapment in the cemented soil mass in the lime stabilized specimens is practically irreversible even on exposure to extreme pH conditions. The lime stabilized contaminated specimens developed unconfined compressive strengths ranging from 100 kPa (4 % lime stabilized 40 % red soil-60 % sand specimen) to 1000 kPa (10 % lime stabilized 100 % red soil specimen). The significant growth of compressive strength upon lime stabilization is attributed to growth of inter-particle cementation bonds by the CAH (calcium aluminate hydrate) and CSH (calcium silicate hydrate) compounds formed by lime-clay reactions, slight reduction in void ratios and growth of strong inter-particle cementation bonds the during steam curing at 800C.
The results of this thesis bring out a procedure to immobilize high concentrations of lead and develop adequate compressive strength of lead contaminated slurry specimens by lime stabilization + steam curing technique. The red soil acted as pozzolana in reactions with lime, while, steam curing accelerated the lime-soil reactions. The procedure can be extended to non-organic slurry wastes that are devoid of pozzolanic material (example, lead contaminated smelting sands). In slurry wastes devoid of pozzolana, materials such as fly ash can be added and the reactions between lime and fly ash would immobilize lead + develop adequate compressive strength. Also, similar to the methodology being adaptable for any non-organic slurries, it can also be extended to other toxic metal bearing wastes, example, zinc, cadmium and nickel.
33
Olaniyi, Foluke Comfort. "Development of Intervention Strategies for Management of Medical Waste in Vhembe District, South Africa." Thesis, 2020. http://hdl.handle.net/11602/1515.
Full textAbstract:
PhD (Public Health)Department of Public Health
Medical waste is a special type of hazardous waste generated from healthcare facilities. Mismanagement of this waste has a negative impact on healthcare workers, patients and their relatives, medical waste handlers and the community. South Africa, like many other developing countries, is resource-constrained in the management of medical waste and poor practices have been reported across the country, especially in the urban health facilities that have received more attention from researchers. This study was conducted to explore the practices and challenges of medical waste management in Vhembe District, a largely rural district in Limpopo province and develop intervention strategies for better management of the waste in the District. A convergent parallel approach of mixed method design was adopted to achieve the objectives of this study. The target population included the main stakeholders of medical waste management in the district: the Department of Health, healthcare facilities and the waste management company responsible for the treatment and disposal of medical waste in Limpopo Province. The study population from the Department of Health included representatives from the medical waste management section while the waste management company was represented by the manager of the company in Limpopo Province. The samples for the healthcare facilities were drawn from fifteen randomly selected healthcare facilities in the district and included the administrative heads, medical waste generators and medical waste handlers. The study was conducted in three phases. Phase 1 was a qualitative study during which the administrative heads of the selected healthcare facilities, personnel directly involved in medical waste management at the healthcare facilities as well as the representatives from the Department of Health and waste management company were engaged in in-depth interviews. This phase also involved voice recording, observations, field documentation and taking of relevant pictures. Thematic content analysis was used to analyze the data obtained. During phase 2 (quantitative study), a semi-structured questionnaire was employed for data collection from medical waste generators and handlers at the healthcare facilities. A total of 229 questionnaires were retrieved from the participants and were analyzed with the Statistical Package for Social Sciences version 25.0. Descriptive statistical analyses were performed; Chi-square and Cramer’s V tests were used to determine the associations between dependent and independent variables, as well as the strength of association where significant relationships exist. Statistical significant level was set at p<0.05 and the results are presented in tables and graphs. The results from both phases were interpreted and discussed simultaneously. Respondents and participants were assured of anonymity of their identities and confidentiality of the information they provided. They were given adequate information about the study and only those who volunteered participated in the study after appending their signatures on the informed consent form. In phase 3, the Medical Research Council Framework was used to develop intervention strategies for improved medical waste management in Vhembe District based on the Strength, Weakness, Opportunity and Threat (SWOT) and Political, Economic, Social, Technological, Environmental and Legal (PESTEL) analysis techniques. The study revealed inefficient practices of medical waste management in all the healthcare facilities. Rate of medical waste generation was 338.15kg/day, 19.2kg/day and 15.5kg/day of HCRW from the hospitals, community health centers and clinics respectively. Segregation practices were poor, and only 28.4% of respondents rated their healthcare institutions as being excellent with medical waste segregation. The type of occupation was found to be significantly associated with exposure to training (p=0.000) and the level of knowledge about medical waste management (p=0.000). Also, the use of personal protective equipment was found to be significantly associated with training (p=0.011). Transportation and temporary storage were not done according to the recommendation in the guidelines and incineration was the main means of treatment of the waste. The final product of waste treatment is being disposed into an hazardous waste landfill. The challenges encountered in the process of managing medical waste include lack of adequate funding and budget for medical waste management, ineffective and irregular training of healthcare workers, non-compliance to medical waste management guidelines, insufficient bins, substandard central storage rooms, insufficient personal protective equipment and unavailability of Hepatitis B vaccine. The strength, weakness, opportunities and threats of medical waste management in Vhembe District were analyzed and specific intervention strategies were developed to improve on the strength, minimize the weakness, take advantage of the opportunity and combat the threats. The developed strategies were validated. This study provides the evidences of poor management of medical waste in Vhembe District, and shows the need for urgent intervention measures to be put in place. We therefore recommend that the intervention strategies proposed here be evaluated and implemented to mitigate the untoward effects of poor medical waste management among healthcare workers and the community as a whole.
NRF
34
"An assessment of waste management practices in South Africa : a case study of Mariannhill landfill site, eThekwini Municipality." Thesis, 2009. http://hdl.handle.net/10413/294.
Full textAbstract:
A number of environmental, social and economic problems are associated with waste disposal in landfill operations. The potential hazards associated with landfill operations are numerous and include fatal accidents, infrastructure damage, pollution of the local environment, harmful air emissions, to simple nuisance problems – such as dust, odour, vermin, and noise pollution. Further challenges include the availability of land and lack of municipal or other financing in the face of rising operation costs. Landfilling is, however, seen by many as an environmentally responsible and cost-effective solution to waste disposal. It is acknowledged however to lead to waste of resources by burying valuable materials that could have been reutilized. Careful engineering can resolve this shortcoming, yet the associated challenges and costs can become prohibitive. The regulatory environment also affects the prospects for adopting this approach to landfill site management in different contexts. The Mariannhill landfill site in eThekwini Municipality, South Africa, provides an opportunity to investigate both the range of challenges which these type of sites encounter, and the solutions which have been developed as a response. The central questions which this research seeks to answer are whether the practices adopted by the Mariannhill landfill site are replicable in other solid waste landfills around eThekwini and whether it can be viewed as an example of best practice in landfill site management more generally. The research finds that the main barrier to easy replication of systems followed at Mariannhill in other landfill sites is the difficulty in replicating the specific structures and character of management. Another key determining factor found is the prevailing attitudes to recycling and the environment in general in the society. Consumers choices are seen to be critical to the prospects for recycling of solid waste, including the size, degradability and recyclable potential of products purchased. In considering the potential for replication of the Mariannhill model as an example of best practice, it becomes clear that the technical aspects of operations at Mariannhill are the most easily replicable, yet other and equally important determinants of success are not easily replicable. These include the existing regulatory environment and prevailing societal attitudes towards recycling.Thesis (M.T.R.P.)-University of KwaZulu-Natal, Durban, 2009.
35
Naidoo, Karunagaran. "The management of e-waste in KwaZulu-Natal." Thesis, 2010. http://hdl.handle.net/10413/9557.
Full textAbstract:
Information Technology is seen as that which makes one's life
easier, fun and more comfortable. When a new cellular phone is
launched one is eager to see what the new phone has to offer, and often
one convinces oneself that the new device is required. This study
investigates what happens to redundant or obsolete electronic devices
like cellular phones, computers and other electronic devices. Are
these devices stored, donated, thrown out with the garbage or are they
recycled? Information from academic sources and from all types of
media, including television, print and electronic was searched to enhance
the survey that was undertaken. Both the informal and formal
sectors of recycling were investigated. A questionnaire was used to
supplement the information found in different kinds of sources. The
collected data was interpreted through the use of SPSS. Descriptive
as well as inferential statistics was used to draw conclusions and
make inferences. An investigation into legislation controlling the disposal
of e-waste is included in this study. International, national, provincial
and local government legislation is outlined. The objectives of
recycling electronic waste are listed together with the challenges that
face the pro-recyclers. The quantitative research methodology approach
has been employed for this research. A key technique used in
this study is the Research Onion. Data analysis and interpretation are
based on the p-value, Pearson's chi-square and Spearman's correlation.
The study has really been an eye opener in that it considers the
“darker side” of Information Technology. The “darker side” of Information
Technology refers to the disposal of obsolete or broken
electronic devices in a manner that is harmful to the environment.
The cost or lack of profit is the main driving force for incorrect disposal
methods. This study has found that the best method of disposal
is the take back system, where manufacturers of electronic devices
are responsible for the safe disposal of the devices that they manufactured.Thesis (M.Com.)-University of KwaZulu-Natal, Westville, 2010.
36
Beard, Jason. "A study of leaching tests for cement stabilised waste." Thesis, 2002. https://vuir.vu.edu.au/15565/.
Full textAbstract:
A cement-stabilised waste was subjected to batch, column, and dynamic leaching tests, and the leaching behaviour of arsenic, copper, lead, selenium, and zinc was investigated. Batch tests included the Australian Bottle Leaching Procedure (ABLP, AS 4493.3-1997), Toxicity Characteristic Leaching Procedure (TCLP, USEPA Method 1310); column testing included small columns (internal diameter = 24mm)
and a large column (internal diameter = 500mm); and dynamic leaching tests were run with both short (1 hour) and long (4 hour) leachant renewal frequencies. A maximum
availability test was used to indicate maximum leaching potential for the metals under investigation.
37
Morgan, Gary Duwayne. "Determining the capability of a vegetation cover to limit effluent leaching from a waste impoundment." Thesis, 2009. http://hdl.handle.net/10413/4959.
Full textAbstract:
A final cover on a waste impoundment is the main physical barrier between the waste impoundment and the environment designed to protect against physical, chemical and biological factors isolating the waste from the atmospheric environment. Since the early 1990‟s regulators in the United States have started accepting vegetation covers in lieu of the prescriptive covers. Currently in South Africa, data that provide field performance comparisons of alternative vegetation covers are few or non-existent; hence a research program was undertaken by an industrial corporation in South Africa to determine the potential use of vegetation covers. In proposing a practical way forward, the Company (AECI Limited) reached an understanding with the Regulators that a vegetated evapotranspiration (ET) cover, would be acceptable provided that its performance in limiting surface water infiltration (and subsequent leaching) could be quantitatively demonstrated.
The overall object of this research was to determine the capability of vegetation cover to limit effluent leaching from a waste impoundment. Analysis of the following sub-objectives were required to address and give answers to this study (1) determine, as accurately as possible a climatic water balance on the vegetation covers, (2) determine the geohydrological properties of the material of the waste impoundment, (3) determine the fate of the water i.e. proportion reused via evapotranspiration as opposed to the proportion infiltrating the waste body beneath the root zone and (4) determine the leaching potential below the waste.
The study identifies and evaluates the climatic (above ground) and geohydrological (sub-surface) parameters used to estimate the water balance of the materials for a waste impoundment. The study then utilizes these parameters at the respective sites in a finite-element model, called the HYDRUS-2D model, to simulate the water balance of the material. The simulated water balance results were then compared against collected field data, which provide the evidence of the efficiency of a vegetation cover to limit effluent from the impoundment.Thesis (M.Sc.)-University of KwaZulu-Natal, Pietermaritzburg, 2009.
38
Netshifhefhe, Nditsheni Mavis. "Management of medical waste by professional nurses at three selected hospitals in Thulamela Municipality, Vhembe District, Limpopo Province, South Africa." Diss., 2017. http://hdl.handle.net/11602/980.
Full text
39
Mabadahanye, Vhonani. "The study of Waste Management practices within households in Khakhanwa Village, Thulamela Municipality." Diss., 2017. http://hdl.handle.net/11602/722.
Full textAbstract:
MPHDepartment of Public Health
The sanitary state of an area is largely influenced by waste handling practices of the residents and measures in place for safe waste evacuation and disposal. Despite strategies that the municipality and local communities have put in place; namely, collection of wastes in one central spot in some villages, littering of all types of wastes is still on the increase in many rural areas. The focus of this study was on common refuse generated at Khakhanwa Village, different waste management practices and the knowledge of villagers on the impact of poor refuse management. The study was carried out using the quantitative, descriptive methodology. A total population of 312 households participated. Data was collected using a structured questionnaire and ethical aspects were taken into consideration. Data was analysed descriptively using SPSS version 22.0. It is presented using graphs, tables and pie chart. The findings show that the respondents satisfactorily showed understanding of waste management and the impact of poor waste management. Due to lack of waste services, the majority of the residents resort to storing wastes within their homes, burning it and disposing of it in open dumping sites as major waste management practices. The most familiar wastes in Khakhanwa village are decomposable wastes, napkins and plastics. These findings call for strengthened waste services in rural areas and more waste education amongst all villagers. Policies on waste management need to be put in motion. Communities need to be equipped with the knowledge of reducing, reusing and recycling for the purpose of limiting wastes. Finally school curricula should be adjusted such that they inform learners about waste management from early ages.
40
Eyitsede, Tosan S. N. "Oil pollution management and environmental assessment in the Niger Delta : a case study of operations of Chevron Nigeria LTD in Ugborodo community in Delta State of Nigeria." Diss., 2010. http://hdl.handle.net/10500/4941.
Full textAbstract:
Since the discovery of oil in Nigeria, way back in 1950s, the country has invariably suffered some negative environmental consequences such as oil pollution resulting from gas flaring and oil extraction, loss of mangrove trees, which before now was a source of livelihood for the indigenous people and habitat for the area’s biodiversity. Oil production activities have caused contamination of marine life, and habitat, which in turn have had negative consequences on the health of humans, who consume the sea food. Inadequate attention had been paid by the successive Governments of Nigeria and the oil companies to these environmental problems over the years.
In this study, an assessment of the effects of oil and gas exploration and exploitation on the nearby communities in some of Chevron’s operational areas was carried out using the Ugborodo community as a case study. Furthermore, investigations were carried out on the toxicity effects of the Escravos crude oil on aquatic organisms like Tilapia and a terrestrial organism such as the Earthworms (Lumbricus terrestris,). The study established the effect and the impact of crude oil when exposed to such organisms mentioned above. The rate of death of barbus fingerlings of Tilapia and the Earthworm (Lumbricus Terrestris) at different concentrations of crude oil was determined and reported. The community survey undertaken by polling data shows the dwindling of the natural resources of the area due to oil exploration and the survey indicate the impacts on natural resources from pollution by crude oil and the consequences on the affected communities using the Ugborodo community in the Chevron’s Nigeria Limited Operational base as a case study.Environmental Sciences
M.Sc. (Environmental Management)
41
Heunis, Louis Barend. "The quantification of medical waste from the point of generation to the point of disposal: case studies at three private hospitals in Pretoria." Diss., 2016. http://hdl.handle.net/10500/23143.
Full textAbstract:
The South African Waste Information System (SAWIS) was developed by the Department of Environmental Affairs and Tourism (DEAT) in 2005. This is a system used by government and industry to capture routine data on the tonnages of waste generated, recycled and disposed of in South Africa on a monthly and annual basis. All waste producers and waste management organisations should contribute to this national waste database and should accurately monitor the types and quantities of waste produced and handled. According to DEAT (2006) the need for Data verification is important. DEAT (2006:59) defined the term Data Verification as: "assessing data accuracy, completeness, consistency, availability and internal control practices that serve to determine the overall reliability of the data collected."
The aim of the study is to determine a procedure, as well as the nature and extent of internal and external source documents, which could be used in the reconciliation of medical waste quantities from generation to disposal. The key objectives are to determine whether the selected hospitals keep internal records of the quantities of medical waste generated; to reconcile the waste quantities on the internal records with the external records, such as the collection certificates, invoices and waste incineration certificates; to ascertain whether the quantity of medical waste generated is equal to the quantity of waste incinerated and disposed of to determine the ratio factor between the quantity of medical waste before incineration and the quantity of the residue (ashes) after incineration, and to make recommendations on the reconciliation of waste quantities from the point of generation to the point of disposal.
The results of the study indicate that the destruction certificate is the proof that the waste that was on-site collected by the service provider has been disposed /treated. Especially as an internal control measure. The health care risk waste (HCRW) management record keeping of quantities of weight as per Hospital A, Hospital B and Hospital C allows the opportunity to analyse the weight per month and per Hospital and per category and to make comparisons. The weakness or the gap however still exist that the waste is not weighed at the point of origin, but at the point where the waste service provider collects the waste onsite. It is from this point onwards that the service level agreement between the hospital and the waste service provider and the document management system and the tracking receipt and the waste collection documents (WCD) becomes relevant and where the quantities of waste per category are for the first time recorded. The hypothesis as stated in Chapter 1 was proven valid.
The study concludes that reconciliation and comparison between the collection certificate and the destruction certificate and the monthly invoice is therefore possible, but the risk of mixing of waste and the understating or overstating of waste quantities is still not overcome.Environmental Sciences
M. Sc. (Environmental management)
42
Mnisi, Fannie. "Environmental risk assessment associated with unregulated landfills in the Albert Luthuli Municipality, Mpumalanga Province, RSA." Thesis, 2008. http://hdl.handle.net/10500/2274.
Full textAbstract:
Integrated management of municipal and hazardous waste is one of the challenges facing the new
municipalities in South Africa, especially those located in previously disadvantaged rural areas.
However, much of the research on solid and hazardous waste management in South Africa has
examined waste management problematics in urban areas, the majority of which are located within
the jurisdiction of local governments which are comparatively effective in terms of providing
adequate disposal services. By contrast, this study has examined the environmental risk
assessment associated with unregulated landfill sites in the Albert Luthuli municipality, in the
Mpumalanga province. The determination of the environmental risk was achieved by the use of
questionnaire surveys and landfill analysis forms in selected study areas.
The findings have highlighted a very high environmental risk, nearly four times and above, the
threshold limits set by the Department of Environmental Affairs and Tourism (DEAT, 2005:15) for
all of the landfill sites examined. Several exposure pathways stemming from associated
environmental impacts have also been identified for the study. The higher environmental risk
determined for the problem sites is ascribed to numerous factors, including their ill-planned
location, the sensitivity and vulnerability of the natural environment and adjacent rural settlements,
the lack of appropriate waste pre-treatment processes prior to disposal, and most significantly, the
lack of regulatory and control measures to contain the myriad of environmental problems
generated. In conclusion, it is recommended that several measures (including closure) should be
taken in order to reduce and contain the magnitude of environmental risks involved.Environmental Sciences
M.Sc.(Environmental Sciences)
43
Nefale, Anza. "An evaluation of strategic management of landfill sites: A case study of Thohoyandou Block J. landfill site, Vhembe District Municipality, Limpopo Province." Diss., 2018. http://hdl.handle.net/11602/1080.
Full textAbstract:
MENVSCDepartment of Ecology and Resource Management
The purpose of this study was to evaluate the strategic management of the Thohoyandou Block J landfill site. There are limited documented materials on strategic management of landfill sites in South Africa. As a result, this study sought to close this gap and expose new insights that it deemed to be of great importance in the management and operations of landfill sites. The capacity of a TBJ landfill site in terms of its efficiency in disposing waste, adherence to rules and procedures and the overall management of the site are the key areas of this study. The dominant types and sources of solid waste disposed at the TBJ landfill site, efficiency and effectiveness of operation of TBJ landfill site and operational challenges are the main areas covered in this study. The study adopted the mixed methods approach, involving both qualitative and quantitative research methods. Both primary and secondary data were acquired. Primary data were obtained through a questionnaire, an interview and field observation, using an observation checklist. Secondary data were obtained from ArcGIS Desktop Help 9.2 and documented materials from the Thulamela Local Municipality and the TBJ landfill site, the Integrated Waste Management Plan, Integrated Development Plan, TBJ landfill site’s monthly report, audit report and landfill site’s operating plan. Basically, field observation and a questionnaire completed by the waste manager, landfill operator and supervisor, were used to collect data on the operational challenges of TBJ landfill site and to obtain data on the efficiency and effectiveness at which the TBJ landfill site is operating. Waste pickers were interviewed and field observation was undertaken, to identify the dominant types and sources of waste disposed at the TBJ landfill site. A questionnaire completed by TBJ landfill operator, ArcGIS Desktop Help 9.2 for field measurement, reports of the amount of waste recorded and the municipality’s database, were utilized to elicit data regarding the determination of the capacity of TBJ landfill site. The results obtained revealed that the TBJ landfill site’s remaining capacity is 317 085 m3, which will be exhausted in the next 4 years. Plastics were found to be the dominant waste disposed at the TBJ landfill site, at 40%, followed by card-boxes, which constituted 32%. The dominant sources of solid waste generation in the TBJ landfill site were households, at 51%, followed by commercial, at 31% and industrial, at 11%. The absence of a weighbridge, to weigh loads of waste, frequent break down of equipment, lack of equipment required to operate the TBJ landfill site efficiently and the presence of fire hazards, were some of the
NRF
44
Manqele, Mbaweni Beauty. Thesis, Rhodes University, 2006. http://hdl.handle.net/10962/d1003377.
Full textAbstract:
This case study was done in KwaZulu–Natal province in South Africa within two municipalities Ethekwini and Umsunduzi Municipality. Three communities participated in this study. The research is motivated by the lack of cooperation between some municipalities and Community Based Organisations (CBOs) in implementing the National Waste Management Strategy (NWMS) at a local level. The primary goal is to explore the availability and development of learning support materials (LSMs) that relates to waste management in collaboration with CBOs and local councillors. The secondary goal is to explore the use of learning support material to promote participation in the implementation of the NWMS. Coresearchers were from the Community Based Organisations as well as local councillors who are located within the communities of these CBOs. Pseudonyms for co-researchers from CBOs and Councillors and the name of their townships have been used to protect co-researchers. A literature review has been conducted to explore research that has been done on the development, usage, accessibility and distribution of the LSMs. Data collection methods included semi-structured interviews; field visits to communities, tape recording of discussions and the keeping of a field journal. Some of the key findings included that LSMs is used by both CBOs and Councillors to try to reduce local environmental problems. It also identified that there are no formal mechanisms between CBOs and Municipalities in dealing with waste management programmes within the identified communities. The other important finding was that the participation of CBOs in the development of LSMs normally excludes the user groups as a result language used is not always understood. Illustrations used in some cases may be misinterpreted if the reader is not English literate as most of material in circulation is written in English. Some recommendations for further research have been made in relation to the findings made in the study. These included recommendations on the development, usage of LSMs, participation of stakeholders in resource development within the context of CBOs and local municipalities.
45
Chisango, Eliot Tichaona. "Potential to grow informal waste recycling in semi-urban areas: case of the P.E.A.C.E. recycling buyback centre in Senwabarwana, Limpopo." Diss., 2017. http://hdl.handle.net/10500/23722.
Full textAbstract:
This research aimed to investigate an area of research that has largely been overlooked in the past, that is, the efficiency, profitability and sustainability of informal waste recycling in semi-urban areas. In exploring the research topic, a recycling buyback centre was used as a case study. The centre facilitates collection, sorting and selling of waste and is located in Senwabarwana, Northern Limpopo Province. Here the P.E.A.C.E (Planning, Education, Agriculture, Cooperatives and Environment) Foundation, an organisation looking at rural poverty alleviation in South Africa, initiated a flagship recycling buyback centre as a community project. This research picks up on prior research that was conducted on a similar project initiated by the same organisation in Ndumo, KwaZulu Natal. Even though the location is different from KwaZulu Natal, both Senwabarwana and Ndumo are faced with similar challenges affecting social, economic and environmental circumstances. Five objectives were identified to provide structure to this research.
Through action research, the study assessed the sustainability of this recycling buyback centre with regard to the impact on social, economic and environmental factors within Senwabarwana. It also covered problems experienced in rolling out waste management initiatives within the semi-urban study location and assessed the municipal framework with regard to waste and how waste is managed and recycled. Furthermore, analyses of the waste data generated at the recycling centre was examined that culminated in offering solutions to the identified problems. Recommendations for acceptable practices in semi-urban waste management are made to enable further research and potentially up-scaling the project for application in other geographic areas.
The study reports both qualitative and quantitative data collected through the investigation of the case study in the start-up phase. The data gathering was done through administering questionnaires to waste pickers associated with the case study centre. Telephonic and face-to-face interviews and secondary data were interchangeably used to address each of the five objectives. The results from the data gathered show that, if properly coordinated and structured, informal waste recycling in semi-urban communities is possible and can contribute positively to the socio-economic and environmental development of these areas. It is envisaged that this study would contribute to the body of knowledge already in existence, whilst also creating an opportunity for further academic research and input within this field to enable the scaling-up of such initiatives.Environmental Sciences
M. Sc. (Environmental Science)