Dissertations / Theses on the topic 'Handjet'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 50 dissertations / theses for your research on the topic 'Handjet.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.
Seo, Na Jin. "Biomechanical models of hand coupling for axial torque and push exertions effects of torque direction, hand-handle friction, and handle size on axial torque and push exertions for cylindrical handles." Saarbrücken VDM Verlag Dr. Müller, 2007. http://d-nb.info/991124189/04.
Full textLex, Egila. "Peter Handke und die Unschuld des Sehens : Untersuchungen zum Verhältnis von Sehvorgängen und Sprache in Peter Handkes Prosa und Gedichten /." Thalwil-Zürich : Paeda-Media-Genossenschaftsverl, 1985. http://catalogue.bnf.fr/ark:/12148/cb34937005h.
Full textAgboh, Peter Mawusi Yautse 1976. "Optimum combining of handset diversity antennas." Thesis, Massachusetts Institute of Technology, 2001. http://hdl.handle.net/1721.1/8935.
Full textIncludes bibliographical references (leaves 93-94).
In this thesis cellular handset and mobile terminal forward link sensitivity improvements due to dual-antenna systems with smart-antenna combining algorithms were determined. The performance of a mobile handset with a top-mounted monopole and back-mounted internal monopole was determined in the field. Handset field tests were conducted both for the handset attached to a phantom-head model and held by a human operator so that the effect of hand blockage and coupling were measured. The measurements were made on the IS-95 (CDMA) SPRINT PCS system in various parts of San Diego. Logged data was analyzed for single antenna performance, selection diversity combining, maximum ratio combining, and optimum combining.
by Peter Mawusi Yautse Agboh.
M.Eng.
Kitra, Maria I. "Low-SAR ferrite handset antenna design." Thesis, Loughborough University, 2006. https://dspace.lboro.ac.uk/2134/35984.
Full textMatin, Timu, and Mats Svanberg. "Uppfällbart handfat." Thesis, KTH, Maskinkonstruktion (Inst.), 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-172017.
Full textToday’s house prices are steady going up, and one square meter in inner Stockholm city is very expensive. The meaning, compact living has existed a long time but mostly aimed at bedrooms and kitchens. The bathrooms in old small apartments, mainly in Stockholm, are often very small. It hasn’t been that much progress in making the bathrooms look roomy, until now. The goal with this project was to develop a fold-up sink, mainly intended for people with small apartments. To save space in the bathroom, the sink could easily be able to fold up against the wall so that it could hang on the wall next to the toilet or behind it. The main focus has been on developing a product that isn’t a compromise compared to a regular sink and also making it easy to use. The product’s initial idea was developed at 2008, but then it was mainly an idea and a concept. The technical solutions to make the product work weren’t started then. In the beginning of the product development process a variation of product concepts were developed to work out the technical problems. The different solutions were compared, before the best one was picked. To be able to put the sink in the same area as the toilet, a new kind off drain was constructed. The outlet consists of a grip that attaches to the toilet ring, and to a tube. In that way the sink can be used in every toilet without needing to connect new drains. A lot of effort has been put, to illustrate the products function and usefulness, to make good renderings from the CAD-models and also a scale prototype, built in ABS plastic, control foam and Plexiglas (PMMA). The prototype was created mainly in a free form machine, also called a 3D-printer. Freeform production is relatively new technology for prototyping, and is an effective but an expensive way for creating physical models from a CAD-model. A part of the prototype assembly was cut out from a part, styrene from a CAD-model.The result of the project is a product that is well described through blueprints, CAD-pictures and rendered pictures. Since time has been limited in this project some boundaries were set.
Yildiz, Beytullah. "Distributed handler architecture." [Bloomington, Ind.] : Indiana University, 2007. http://gateway.proquest.com/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:3277972.
Full textSource: Dissertation Abstracts International, Volume: 68-09, Section: B, page: 6098. Adviser: Geoffrey C. Fox. Title from dissertation home page (viewed May 9, 2008).
Longo-Bartel, Martha Jane. "Left-handed teaching techniques for the right handed." CSUSB ScholarWorks, 2000. https://scholarworks.lib.csusb.edu/etd-project/1681.
Full textFisher, Jennifer R. Bakken Linda. "Psychosocial differences between left-handed and right-handed children." Diss., A link to full text of this thesis in SOAR, 2006. http://soar.wichita.edu/dspace/handle/10057/646.
Full text"December 2006." Title from PDF title page (viewed on Oct 31, 2007). Thesis adviser: Linda Bakken. Includes bibliographic references (leaves 33-37).
Alhabashneh, Mohammad Abad Alhameed. "Protect team handler (PTH)." Thesis, University West, Department of Technology, Mathematics and Computer Science, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:hv:diva-567.
Full textThere is always a need for easy-to-follow processes that enable accurate and non-time consuming solutions. Nowadays we see a lot of different approaches to development processes in software engineering. This project is concerned with how to manage a software development process in a reliable, secure and efficient way. Software is available which provides some help for project managers / administrators to work more productively, with effective communication. Using such systems, it is possible to keep track of all the phases of development, including task distribution, making maximum use of previous hands-on experience and increasing productivity, to deliver a finished product in minimum time. No existing solution, however, fulfills all the desirable criteria. This paper describes the motivation, design and implementation of an improved development management system using Active Server Pages and Microsoft Internet Information Services with a backend Microsoft Access Database developed using a waterfall software development process. The resulting system is described and evaluated. This system will be beneficial for software houses, because they can communicate on the web, allowing efficiency gains by avoiding the need to call meetings for distribution of tasks among employees, with the additional advantage of location-transparent team management through the Internet.
Murphy, Darlene W. "The Praenestine cistae handles." Dettelbach : Röll, 2001. http://catalog.hathitrust.org/api/volumes/oclc/50811163.html.
Full textElmaghraby, Ahmed [Verfasser]. "Transmitter Leakage Cancellation in Cellular Handset Receivers / Ahmed Elmaghraby." München : Verlag Dr. Hut, 2016. http://d-nb.info/1111160333/34.
Full textBaum, Frank. "Marktsegmentierung im Handel /." Göttingen : Cuvillier, 1994. http://bvbr.bib-bvb.de:8991/F?func=service&doc_library=BVB01&doc_number=006420675&line_number=0001&func_code=DB_RECORDS&service_type=MEDIA.
Full textRomeiser, Thomas. "Marktzutrittsschranken im Handel /." Göttingen : GHS, 1998. http://bvbr.bib-bvb.de:8991/F?func=service&doc_library=BVB01&doc_number=008262021&line_number=0001&func_code=DB_RECORDS&service_type=MEDIA.
Full textStückler, Maria. "Handel auf Terminkontraktmärkten." Inst. für Volkswirtschaftstheorie und -politik, WU Vienna University of Economics and Business, 2002. http://epub.wu.ac.at/1008/1/document.pdf.
Full textSeries: Department of Economics Working Paper Series
Grossauer, Patrick. "Sortimentsreduktion im Handel." St. Gallen, 2004. http://www.biblio.unisg.ch/org/biblio/edoc.nsf/wwwDisplayIdentifier/01650456001/$FILE/01650456001.pdf.
Full textSchaper, Kai-Michael. "Der Integrierte Handel : eine konzeptionelle Beziehungsgestaltung zwischen Hersteller, Handel und Letztnachfrager /." Frankfurt am Main [u.a.] : Lang, 2006. http://bvbr.bib-bvb.de:8991/F?func=service&doc_library=BVB01&doc_number=014652841&line_number=0001&func_code=DB_RECORDS&service_type=MEDIA.
Full textSalditt, Thomas C. "Netzwerkmanagement im Handel Prozessinnovationen im Handel am Beispiel der RFID-Technologie." Wiesbaden Gabler, 2007.
Find full textSalditt, Thomas C. "Netzwerkmanagement im Handel : Prozessinnovationen im Handel am Beispiel der RFID-Technologie /." Wiesbaden : Gabler, 2008. http://d-nb.info/987655604/04.
Full textHedén, Angelika, and Sabine Young. "Handen och tanken : en studie om hur handen och hjärnan samverkar." Thesis, Umeå universitet, Institutionen för tillämpad utbildningsvetenskap, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-154658.
Full textAlhaddad, A. G. "Balanced antennas for mobile handset applications. Simulation and Measurement of Balanced Antennas for Mobile Handsets, investigating Specific Absorption Rate when operated near the human body, and a Coplanar Waveguide alternative to the Balanced Feed." Thesis, University of Bradford, 2012. http://hdl.handle.net/10454/5512.
Full textUK Engineering and Physical Sciences Research Council (EPSRC)
Alhaddad, Abdolrauf Gawad. "Balanced antennas for mobile handset applications : simulation and measurement of balanced antennas for mobile handsets, investigating specific absorption rate when operated near the human body, and a coplanar waveguide alternative to the balanced feed." Thesis, University of Bradford, 2012. http://hdl.handle.net/10454/5512.
Full textAlhabashneh, Mohammad Abad Alhameed. "Project and team handler (PTH)." Thesis, Högskolan Väst, Institutionen för teknik, matematik och datavetenskap, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:hv:diva-567.
Full textHolmgren, Erik. "UWB Measurement Techniques and RF Coexistence in a Mobile Handset." Thesis, Linköpings universitet, Institutionen för teknik och naturvetenskap, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-97082.
Full textWu, Sun John, and 胡新. "Mobile phone handset strategies of market leaders in Hong Kong." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1999. http://hub.hku.hk/bib/B31269576.
Full textWu, Sun John. "Mobile phone handset strategies of market leaders in Hong Kong /." Hong Kong : University of Hong Kong, 1999. http://sunzi.lib.hku.hk/hkuto/record.jsp?B20604555.
Full textLi, Ruiying. "Outsourcing and OEM-CMS relationship management in mobile handset industry." Thesis, University of Cambridge, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.608703.
Full textNa, Hee Kyung. "Strategic Management of Co-opetition in Mobile Handset Product Development." Kyoto University, 2015. http://hdl.handle.net/2433/199056.
Full textOLAUSSON, ROBIN, and JIMMY WESTERLUND. "Distributed Event Handler : Creation of a distributed event handler with priority handling and synchronized timing." Thesis, KTH, Skolan för informations- och kommunikationsteknik (ICT), 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-128713.
Full textUnder uppstarten av ett projekt ck vi reda pa att det behovdes en handelsehanterare. Handelsehanteraren skulle vara redundant och kunna sakerstalla att handelser beroende av varandra, kordes i den ordning som speciserats. Policies skrevs ner for att forsakra att om handelsehanteraren kunde uppfylla dessa, var detta produkten som eftersoktes. Resultatet blev en handelsehanterare skriven i Erlang, vilken forsakrar att samtliga event givna, blev utforda i den specierade ordningen. Trots att den inte uppfyller samtliga policies, nns det planer for hur man i framtiden skall kunna losa dessa problem. Sammanfattningsvis, trots att den framtagna handelsehanteraren inte ar den kompletta produkten, presenterar anda denna rapport en losning pa det generella handelsehanteringsproblemet.
Grossauer, Patrick. "Preisfairness im Handel Determinanten, Messungen und preisstrategische Implikationen für den Schweizer Handel /." St. Gallen, 2008. http://www.biblio.unisg.ch/org/biblio/edoc.nsf/wwwDisplayIdentifier/01650456004/$FILE/01650456004.pdf.
Full textJameleddine, Kerim. "Ny handel ger ny politik? : EN STUDIE AV EU:S HANDEL MED KINA." Thesis, Uppsala universitet, Nationalekonomiska institutionen, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-317363.
Full textSvensson, Marlene. "E-handel i småföretag." Thesis, Växjö University, School of Mathematics and Systems Engineering, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:vxu:diva-5.
Full textE-commerce is a conception who many are taking about nowadays. E-commerce is associate with computer based business and it’s a new way to do business on. Users and system connect up to each other for effective mediate and transfer information. Within e-commerce there’s a lot of ways to do business on and it can for example be between a business and a another business (B2B) or between business and consumer (B2C).
In this degree report have I reached if small business will invest on e-commerce and if they will, how. I have used theory testing research and as research method have I used surveys. As data acquisition method have I used interviews. Except the interviews there also is some chapter in the report to get a background and look in ecommerce and Internet.
E-handel är ett begrepp som många pratar om i nuläget. E-handel förknippas med datorstödd handel och det är ett nytt sätt att bedriva affärsverksamhet på. Användare och system kopplas upp mot varandra för att sedan effektivt förmedla och överföra information. Inom e-handel finns det många sätt att göra affärer på och det kan vara till exempel mellan ett företag och ett annat företag (B2B) eller mellan företag och konsument (B2C).
I denna magisteruppsats har jag undersökt ifall småföretag vill satsa på e-handel och i så fall på vilket sätt. Tillvägagångssättet jag har använt mig av har varit teoritestande. Som undersökningsmetod har jag använt surveys. Datainsamlingsmetoden har varit intervjuer där jag har intervjuat tretton olika företag i södra Småland. Förutom intervjuerna finns det ett antal kapitel i uppsatsen för att få en bakgrund och inblick i e-handel, dess begrepp, Internet med mera.
Herzog, Ralf. "Handel mit gebrauchter Software /." Baden-Baden : Nomos-Verl.-Ges, 2009. http://bvbr.bib-bvb.de:8991/F?func=service&doc_library=BVB01&doc_number=017397082&line_number=0001&func_code=DB_RECORDS&service_type=MEDIA.
Full textAhlin, Cecilia. "Affärsrelationer vid elektronisk handel." Thesis, University of Skövde, Department of Computer Science, 2001. http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-511.
Full textDetta examensarbete behandlar elektronisk handel mellan företag och vilken affärsrelation som företaget har med sina företagskunder efter införandet av elektorisk handel. Telefonintervjuer har skett med fyra olika företag som ingår i möbelbranschen. Syftet med arbete är att se om företagens förväntningar med avsikt på fem olika aspekter som utgör en god affärsrelation infriats.
Denna undersökning visar att aspekterna samarbete och förtroende är de två aspekter som företagen har störst förväntningar på. De andra tre aspekterna engagemang, anpassning och kunskap om kunden har generellt företaget inga större förväntningar innan införandet av elektronisk handel. Om dessa förväntningar har infriats eller inte besvaras inte i denna undersökning på grund av olika faktorer som har spelat in.
Barkeling, Mikael, and Erika Sjöström. "Elektronisk handel mellan företag." Thesis, Linköping University, Department of Management and Economics, 2000. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-717.
Full textUnder de senaste åren har elektronisk handel, eller e-handel som det ofta kallas, blivit en allt vanligare företeelse. Orsaken till detta står att finna i Internets snabba framväxt. Då den teknik som behövs för tillgång till Internet är billig, enkel och lättillgänglig har det skapats förutsättningar för en snabb och omfattande utveckling av den elektroniska handeln. Elektronisk handel kan rikta sig både till konsumenter och till företag. Det är dock den typ som riktar sig till företag som idag är den vanligaste formen av elektronisk handel och även den som förutspås öka mest.
Med utgångspunkt i ovanstående resonemang har vi valt att studera elektronisk handel mellan företag. Vi har därför valt att undersöka ett system för elektronisk handel och ett antal av de kunder som använder sig av detta. Vi har funnit att de undersökta kundföretagen alla är mycket positivt inställda till elektronisk handel. Användandet av e-handelssystemet har inte inneburit några stora förändringar för kundföretagen, den allmänna uppfattningen är dock att e-handelssystemet lett till att deras arbete blivit något mer bekvämt. Vi menar att e-handelssystemet troligen skulle leda till fler fördelar för kundföretagen om det utökades vad gäller antalet funktioner samt funktionernas omfattning. För att en utbyggnad av e-handelssystemet ska komma kunderna till godo anser vi dock att det är viktigt att ta vissa aspekter i beaktande. Enligt vår mening är det viktigt att företaget arbetar för att skapa goda relationer till sina kunder samt att de utvecklar väl fungerande kanaler för återkoppling. Vi anser vidare att de funktioner e-handelssystemet utökas med bör vara valbara för att därigenom undvika att systemet blir alltför komplicerat. Slutligen anser vi det vara av stor vikt att företaget kontinuerligt informerar kunderna om e-handelssystemets funktion och utveckling.
Hoxha, Visar. "E-handel i Automationsföretag." Thesis, Mälardalen University, School of Sustainable Development of Society and Technology, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-9826.
Full textSyfte:Elektronisk handel är ett växande fenomen i affärsvärlden. Att förstå företagens avsikt med e-handelsanvändning är viktigt för både akademiker såväl som praktiker. Företag, organisationer och till och med kommuner har börjat bedriva e-handel för att automatisera, effektivisera och på sikt spara pengar i sina verksamheter. Syftet med denna studie är att empiriskt beskriva e-handelns utveckling och användning i Sverige och specifikt inom den teknologiska industrin som arbetar med automation.
Metod:Denna studie behandlar e-handel i automationsföretag. Respondenterna ombads att validera betydelsen av e-handel genom webbaserade enkäter. Vidare undersöker denna studie effekterna av e-handel mellan företag. Resultatet bekräftades genom att analysera data och information med hjälp av SPSS.
Slutsatser:Resultaten visar att e-handel mellan företag ger positiva effekter. En betydande del av automationsföretagen var positiva till e-handel och slutsatserna kan vara till hjälp för företag vid bedömningen av drivkrafterna och hindren för en effektiv driftsättning av e-handel med andra företag. Resultatet av e-handel är främst effektivitet i arbetet och reducerad administration.
Hu, Hengqin. "Produktqualität und internationaler Handel." Berlin Logos-Verl, 2005. http://deposit.ddb.de/cgi-bin/dokserv?id=2766735&prov=M&dokv̲ar=1&doke̲xt=htm.
Full textJäckle, Yves. "Mobile Marketing im Handel." St. Gallen, 2007. http://www.biblio.unisg.ch/org/biblio/edoc.nsf/wwwDisplayIdentifier/01651306002/$FILE/01651306002.pdf.
Full textHerzog, Ralf. "Handel mit gebrauchter Software." Baden-Baden Nomos, 2008. http://d-nb.info/993229859/04.
Full textSilcock, Sabira. "Can you Handle this?" Thesis, Konstfack, Ädellab, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:konstfack:diva-6334.
Full textAmdal, Oddveig Regine. ""Det handler om tillit, det handler om trygghet og det handler mange ganger bare om å vise at du er der" : Lærer i den videregående skolen." Thesis, Norges teknisk-naturvitenskapelige universitet, Pedagogisk institutt, 2014. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-26901.
Full textChou, Huang-Kun, and 周鍠坤. "The Strategy of Taiwanese Handset ODM Company to Cope With “Shan Zhai” Handsets." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/43290036514486954235.
Full text臺灣大學
會計與管理決策組
98
The global mobile phone market grew rapidly over the past 10 years. With good R&D capabilities and production efficiency, Taiwan’s mobile phone foundry industry rises by ODM companies getting the orders of low-end handsets from international brand mobile phone companies. From 2007, Chinese “Shan Zhai” handsets emerge to meet the huge demand of Chinese farmers and migrant workers, and exporting to other emerging markets by its low price. "Shan Zhai" handsets rapidly sweep through low-cost handset market, and bring great impact to Taiwanese handset ODM companies. In this study, we use secondary data to investigate the global mobile phone market, "Shan Zhai" handsets developing trajectory and the current status of Taiwanese handset ODM companies. Then use the value chain, the threat of the new entrants within Porter’s five forces and business model framework to analyze the competitiveness of "Shan Zhai" handsets. "Shan Zhai" handsets adopt MediaTek''s integrated mobile phone solution, through hundreds of mobile phone design houses and thousands of phone integrators, to form a resource sharing system. This system not only owns economic scales, but also vitality and flexibility. Through this industry value chain innovation, "Shan Zhai" handsets owns the advantages of low cost and short product development cycle, coupled with active access to distribution channels and rapid response to market demand. All of these create the competitiveness of "Shan Zhai" handsets. But they don’t focus on quality, not getting certification of network testing, which will be the limit of their development. Finally, we analyze the industry value chain activities and the difficulties that "Shan Zhai" handsets encounter. We propose four strategies to Taiwanese ODM companies with their competitive advantages. (1)Develop new MediaTek’s integrated solution to enter "Shan Zhai" market (2)Develop new MediaTek’s integrated solution to design and manufacture for international brand mobile phone company. (3)Design and manufacture handsets for worldwide distributors that are with scale and willing to have own brand. (4)Cooperate with worldwide telecommunication operators. In order to cope with disruptive innovation of "Shan Zhai" handsets, we review the resources, processes and values of Taiwanese handsets ODM companies, then we suggest to create new organization for the effective implementation of the above strategies. There are below two methods for new organizations. (1)Split out one team to set up a new company. (2)ODM company merge and acquire "Shan Zhai" company with scale, and add the R&D human resources, but no process and value integration. By above strategy and organization suggestion, we hope to help Taiwanese handset ODM companies out of current predicament.
CHEN, TAI-YU, and 陳泰余. "Construction and Evaluation on Handles of Double Handle Hand Tools." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/mjz7jb.
Full text國立雲林科技大學
工業設計系
106
Hand tools are the auxiliary apparatus to assist people engaged in percussing, cutting, assembling, and disassembling. A hand tools with good handle design will facilitate the performance and reduce the possibility of upper limbs injury of users during work. The handle design is considered as one of the most important factors of hand tools. The purpose of this study was to explore the optimal grip span and construct handle profile of two-handle hand tools, and evaluate its efficiency and comfort. Forty participants (20 male, 20 female, aged 22-31 year, m= 24.2 year, SD= 1.9 year) were recruited as subjects for hand dimension measurements and hand grip strength. A curve profile gauge made by this study was used to measure the hand anthropometric data. The hand measurements included: 1) the grip span between thumb and the other four fingers, 2) the curve profile at second knuckle of the four fingers, 3) the curve profile on the root of thumb, 4) the length of second knuckle of the four fingers. The hand grip strength was measured by the hand dynamometer, and the maximal volitional contraction of the hand and the finger pressure were measured. The study results showed: 1) the average grip distance of index finger, middle finger and ring finger is 58.2 mm, 67.8 mm and 77.2 mm, respectively. It is the appropriate grip distance for the hand, 2) the minimum value average length of the second knuckle of the four fingers is 15.9 mm, which is the width of the handle, 3) the male had the largest average grip strength at the grip span of 6 cm, while the female had the largest average grip strength at the grip span of 5 cm, 4) the maximum pressure of fingers was middle finger, followed by ring finger, index finger, base of thumb and little finger, 5) the variation of the total finger pressure of the new handle was smaller than the straight handle, indicating that the fingers pressure of the new handle was more average than that of the straight handle, and 6) the comfort to new handle was better than straight handle. The results of this study can provide a reference for hand tool designers and industry.
Chen, Chung-Kuang, and 陳重光. "The Study of the Influence of Work Postures and Handle Interface Factors on Two-Handed Manual Ability." Thesis, 1999. http://ndltd.ncl.edu.tw/handle/67902332835177545979.
Full text東海大學
工業工程學系
87
The research studied about the influence of work postures and handle interface factors on two-handed manual ability. The handle interface factors focus on the material of gloves. The work postures contains stand and sit. And analysis the influence of gender,. ponderal index and the habit of sport. According to the research framework being referred and sample of students study in Tunghai University, this investigation was taken by using the equipments which include the finger coordination, wrist coordination and arm coordination. Then the analysis of data was processed with SAS/PC. ANOVA, GLM, Duncan''s multiple-range test and correlation analysis have been used in this study. The following three conclusions were made. 1. For influence on the finger coordinate operation, the difference of handle interface factors, gender and ponderal index was significant. The others(work postures, the habit of sport) was not significant. 2. For influence on the wrist coordinate operation, the difference of handle interface factors, gender and ponderal index was significant. The others(work postures, the habit of sport) was not significant. 3. For influence on the arm coordinate operation, the difference of work postures and the habit of sport was significant. The others(handle interface factors, gender and ponderal index) was not significant.
王明芬. "A study on global handset market and Taiwan handset printed circuit board industry supply demand forecasting." Thesis, 2005. http://ndltd.ncl.edu.tw/handle/67501747941792961940.
Full textHung, Wei-Chia, and 洪偉家. "Implementing Bluetooth Interphone on Mobile Handset." Thesis, 2005. http://ndltd.ncl.edu.tw/handle/32845147720622343981.
Full text大同大學
資訊工程學系(所)
93
The main purpose of this thesis is to investigate how to develop an intercom system on mobile handset via Bluetooth. First, we study the Bluetooth technology. Then, we survey the mobile device architecture and mobile operation system. Finally, We try to implement an IM(Instant Message) function on mobile handset via bluetooth. Using Bluetooth technology, we don’t need pay any charge for carriers during communication.
Chen, Chun-Heng, and 陳俊亨. "Antenna designs for mobile handset applications." Thesis, 2008. http://ndltd.ncl.edu.tw/handle/71757628474266526782.
Full text正修科技大學
電子工程研究所
96
According to develop the trends of the mobile system, the antenna designs for broadband operation have been proposed. The principal constructions are the printed plane antennas, the advantages are made easy, low cost, low-profile. Utilizing the multiple current paths or dual current paths in these antennas by 50Ω of the coaxial feed to reach the multi-band. In addition, this notch can alter the electromagnetic coupling effects between the monopole and the ground plane, and improves impedance bandwidth to make the frequency ratio around 2.04:1. To reach GSM/PCS/DCS/UMTS operation band.
許志瑋. "Miniaturization of DVB-H Handset Antennas." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/ke9932.
Full text國立交通大學
電信工程系所
95
Broadband, size reduction, radiation pattern, and antenna gain are the major issues to be considered. It is well-known that these issues are trade-offs one another. In the thesis, by applying half-bow-tie monopole antenna and x to the power of N curved line structure, two antenna prototypes for DVB-H are proposed. With the help of ground plane surrounding the antenna, a half-bow-tie monopole antenna is proposed to increase the bandwidth. To broaden bandwidth, boundaries of No.1 antenna are changed and become a curved line. The curved line is described by a x to the power of N. The simulated and measured results confirmed that the proposed antenna can operates at 470 MHz to 800 MHz bands. The antenna not only has a simple planar structure but also yields the smallest antenna area. Moreover, the antenna has a nearly omni-directional radiation pattern and a reasonable peak gain of 2.25 dBi to 3.74 dBi.
Hsieh, Hsuan-Wei, and 謝宣威. "Antenna design for handset phone applications." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/41924029941710563500.
Full text國立臺灣海洋大學
電機工程學系
97
We have proposed two types of built-in internal antennas implemented in 3.5G mobile handset for application in GSM、DCS、PCS、UMTS、Bluetooth、WLAN and WiMAX frequency bands. Both designs were printed on FR4 substrates and have the character of simple structure. The first antenna architecture is a hybrid antenna consists of a monopole and a loop antenna. The resonant element for the lower band which has application for GSM、DCS、PCS、UMTS、Bluetooth is facilitated by the monopole antenna, while that of the higher band for WLAN and WiMAX application is provided by the loop antenna. Near omni-directional radiation patterns have been achieved for the proposed antenna system with a measured peak gain of about 4dBi. The architectural design of the second antenna consists of a C-shape monopole antenna. This antenna design generated radiation covering the entire operation bands. The radiation patterns were near omni-directional in the operation bands with a measured peak gain of about 5dBi.
董順萍. "ESD Protection of Handset Video Products." Thesis, 2006. http://ndltd.ncl.edu.tw/handle/44856322892750950042.
Full textChen, Ming-Hong, and 陳明宏. "Handset Antenna Design with Branched Ground." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/92672156121886879299.
Full text正修科技大學
電子工程研究所
101
This study presents novel designs for handheld devices antenna. The first design proposes a monopole antenna with a branch the ground for multi-mode operations. The second design mainly consists of double folded monopole and branch ground to resonate in the lower-frequency band over LTE700/GSM850/GSM900. Another monopole is added to combine with the former resonators to reach LTE700/WWAN operation. Moreover, all the resonators can be characterized independently. The last design is a further study of the second case of the environment effect on six-band operation. In addition, the bio-compatibility is discussed.