Academic literature on the topic 'Granularity deformation'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Granularity deformation.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Granularity deformation"
Deng, Zheng Jie, Feng Wei Wang, Guo Yuan Chen, Chun Shi, Shu Qian He, and Shu Lei Wu. "A Mesh Deformation Method with Multiple Editing Granularities." Applied Mechanics and Materials 263-266 (December 2012): 1822–29. http://dx.doi.org/10.4028/www.scientific.net/amm.263-266.1822.
Full textDeng, Wenli, Fuming Deng, Ruiping Liu, and Xiangdong Ma. "Granularity-induced plastic deformation mechanism of pure polycrystalline cubic boron nitride." Ceramics International 46, no. 14 (October 2020): 21932–38. http://dx.doi.org/10.1016/j.ceramint.2020.04.193.
Full textLiu, Xiao Guang, Xin Li, Ding Zhong Tang, Jian Sheng Yao, and Shu Xin Niu. "Effect of Bimodal Granularity Distribution on the Properties of Silica-Based Ceramic Cores." Materials Science Forum 898 (June 2017): 1724–31. http://dx.doi.org/10.4028/www.scientific.net/msf.898.1724.
Full textGuan, Jun, De Min He, Yun Shan Li, and Qiu Min Zhang. "Lignite Particle Size Distribution and its Effect on Briquetting." Advanced Materials Research 550-553 (July 2012): 506–10. http://dx.doi.org/10.4028/www.scientific.net/amr.550-553.506.
Full textWu, Xizhi, Han Niu, Xian-Jun Li, and Yiqiang Wu. "A study on the GA-BP neural network model for surface roughness of basswood-veneered medium-density fiberboard." Holzforschung 74, no. 10 (October 25, 2020): 979–88. http://dx.doi.org/10.1515/hf-2019-0248.
Full textQu, Shou Jiang, Jie Cai Han, and Song He Meng. "Compressive Deformation Behavior of the Ferritic Oxide Dispersion Strengthened Alloys at Elevated Temperatures." Key Engineering Materials 353-358 (September 2007): 412–15. http://dx.doi.org/10.4028/www.scientific.net/kem.353-358.412.
Full textHarničárová, Marta, Jan Valíček, Milena Kušnerová, Ivan Kopal, Júlia Litecká, Milan Kadnár, Ján Kmec, and Zuzana Palková. "Prediction of Shortening and Material Grain Size after Extrusion Using the ECAP Method." Defect and Diffusion Forum 400 (March 2020): 91–105. http://dx.doi.org/10.4028/www.scientific.net/ddf.400.91.
Full textZhou, Tian Rui, L. J. Wang, and C. H. Xiong. "Study on Superplastic Grain Growth Model and Dynamic Simulation." Materials Science Forum 551-552 (July 2007): 639–44. http://dx.doi.org/10.4028/www.scientific.net/msf.551-552.639.
Full textZhu, Jianan, Zhiming Yu, Liyan He, Xihua Cao, Hena Ji, and Xiuxian Song. "Mechanism by Which MC Controls Harmful Algal Blooms Revealed by Cell Morphology of Aureococcus anophagefferens." International Journal of Environmental Research and Public Health 18, no. 21 (October 25, 2021): 11191. http://dx.doi.org/10.3390/ijerph182111191.
Full textKwiecień, Sławomir. "The influence of loading plate diameter on the results of trial load tests of dynamic replacement columns." Transportation Overview - Przeglad Komunikacyjny 2017, no. 5 (May 1, 2017): 1–9. http://dx.doi.org/10.35117/a_eng_17_05_01.
Full textDissertations / Theses on the topic "Granularity deformation"
Луценко, Владислав Анатолійович, Владислав Анатольевич Луценко, and Vladyslav A. Lutsenko. "Наукові основи вдосконалення термомеханічної обробки катанки для сталевого дроту малого діаметру." Thesis, Запорізький національний технічний університет, 2015. http://eir.zntu.edu.ua/handle/123456789/417.
Full textUK: Дисертаційна робота присвячена підвищенню в процесі ТМО пластичних властивостей сталевої катанки. Отримана сталева катанка має структуру: високовуглецева – дисперсний перліт із відсутністю замкнутої цементитної сітки, мінімальний зневуглецьований шар, який рівномірно розподілений по периметру; низьковуглецева – рівномірну структуру фериту з мінімальною кількістю перліту; легована – наявність бейніто-мартенситних ділянок до 10% в змішаній структурі. Результати використані на дротових станах ВАТ «БМЗ» та ПАТ «АрселорМіттал Кривий Ріг». Підвищення пластичності катанки забезпечило виготовлення сталевого дроту малого діаметру без проміжної термічної обробки, що дозволило знизити видатковий коефіцієнт металу в середньому на 10%. EN: The dissertation is devoted of increasing in thermo-mechanical processing the plastic properties of steel wire rod. The obtained steel wire rod has the structure: high carbon – the dispersion of perlite without closed cementite net, the minimum depth of equable decarburized layer; low carbon – uniform structure of ferrite with a minimum of perlite; alloy – the occurrence of bainite-martensite areas up to 10% in the mixed structure. The results were used on the rod mills OJSC “Byelorussian steel works” and РJSC “ArcelorMittalKryvyiRih“. The increasing of plasticity provided the production of steel wire of small diameter without intermediate heat treatment, thus reducing the expenditure coefficient of metal by 10% in average. RU: В диссертационной работе решена актуальная научно-техническая проблема – повышение после высокотемпературной прокатки пластических свойств металла путем развития научных основ о влиянии процессов ТМО на структурообразование и качественные характеристики стальной катанки. Установленные закономерности позволили совершенствовать технологию ТМО катанки и при экономии материальных ресурсов обеспечить производство стальной проволоки малого диаметра для металлокорда (в том числе сверхвысокопрочного), высокопрочной бортовой, канатной, легированной сварочной и низкоуглеродистой. Изучена кинетика превращения аустенита непрерывнолитой стали 90 при непрерывном охлаждении и в изотермических условиях. Установлено, что выделения цементита по границам зерен подавляются и полностью отсутствуют при скоростях более 10°С/с и при изотермическом распаде. Определено, что величина эффекта рекалесценции в стали 90 зависит от времени превращения. Установлено, что при ТМО снижение температуры после горячей деформации с 1050…1100°С до 900…950°С в результате принудительного охлаждения при повышении дробности деформации (на 20%) приводит к увеличению пластических свойств высокоуглеродистой стали. Полученная катанка для стальной проволоки, в отличие от традиционной, имеет повышенные пластические свойства. Основу структуры катанки составляет: высокоуглеродистой – сорбитообразный перлит (более 70%) с отсутствием избыточных структур (замкнутой цементитной сетки), минимальный обезуглероженный слой равномерно распределен по периметру; низкоуглеродистой – равномерная структура феррита с минимальным количеством пластинчатого перлита; легированной – наличие бейнито-мартенситных участков до 10% в смешанной структуре. Повышены требования к микроструктуре и свойствам высокоуглеродистой катанки и проволоки, которые отражены в изменении №11 к ЗТУ 840-03-2006 «Катанка стальная сорбитизированная для металлокорда, бортовой проволоки и проволоки для рукавов высокого давления» и ТУ У 276.3-23365425-638.2008 «Проволока стальная термически обработанная». Результаты использованы на ПАО «АрселорМиттал Кривой Рог» при разработке СТИ 228-112-2008 «Производство катанки из легированных сталей для сварочной проволоки ответственного назначения», изменения №3 к режимам охлаждения проката в потоке проволочного стана 150-1 СПЦ-1. Разработаны и внедрены на ОАО «БМЗ» режимы ТМО стальной катанки, в том числе для сверхвысокопрочной проволоки и металлокордапо ЗТУ 840-03-2006 (Изменения к ТК 840-П13-01-2002 и ТК 840-П3-01-2007 на режимы двухстадийного охлаждения катанки различного марочного сортамента в потоке стана 150). Повышение пластичности после высокотемпературной прокатки обеспечило изготовление стальной проволоки малого диаметра различного назначения без промежуточной термической обработки с сохранением требуемых конечных характеристик. Катанка, изготовленная по новому режиму ТМО, переработанная на проволоку малого диаметра, имеет лучшую технологичность в сравнении с базовой. Так, при производстве высокопрочногометаллокорда обрывность снизилась на 34%, а сверхвысокопрочного – на 23%. Освоение усовершенствованных режимов ТМО позволило снизить расходный коэффициент металла в среднем на 10%. Общий фактический экономический эффект от внедренных новых технологических решений составляет 31,7 миллиона гривен, доля автора – 4,44 миллиона гривен.
Bao, Chengheri. "Analyse par interférométrie laser de la striction diffuse et localisée dans des tôles d'aciers." Thesis, Troyes, 2016. http://www.theses.fr/2016TROY0014/document.
Full textThe evolution of the plastic strain localization field of ductile metals was followed by electronic speckle pattern interferometry (ESPI) during a uniaxial tensile test. It was shown that the mathematical model, a system of two crossing straight bands, describes accurately the evolution of the strain rate field from diffuse necking up to rupture. The physical characteristics of the localization, such as the width of the bands, their orientations and maximum strain rates were identified quantitatively. Their evolutions were followed and analyzed from several influencing factors, which are both microscopic, such as grain size and crystal structure, and macroscopic, like the geometry of the specimen and the direction in which the specimen were cut with respect to the rolling direction, and the pulling speed. It has been found that the bands narrow down during the necking process and their orientations were also changing. These evolutions, the necking mode and the transition between the diffuse and localized necking are influenced differently by these factors
Jing, H., C. Li, Yakun Guo, L. Zhang, L. Zhu, and Y. Li. "Modelling of sediment transport and bed deformation in rivers." 2013. http://hdl.handle.net/10454/7793.
Full textA two dimensional (2D) RNG k-ε sediment model including the effects of secondary currents is developed to simulate sediment transport and bed deformation in rivers with continuous bends. Nonuniform suspended and bedload sediment transports and variation of effective bed material size distribution are included in the model. A semi-coupled scheme for sediment model is proposed, which can be used for simulating both the long- and short-term sediment transport whenever riverbed changes. The model is applied to simulate the flow and sediment transport in the Shapotou reservoir in the upper reach of the Yellow River which is a typical natural river reach with continuous bends. River bed deformations caused by suspended and bedload sediment transport are investigated. Good agreement between the numerically simulated results and the field measurements is obtained, indicating that the model is capable of simulating the sediment transport and predicting the bed deformation of rivers having continuous bends with reasonable accuracy.
the Major Research Plan Project, National Natural Science Foundation of China(Grant No.: 91230111 and 51279071); National Key BasicResearch Development Program of China (973 Program, Grant No.: 2010CB429002);Project of Science and Technology of Colleges in Ningxia, China (Grant No.:NGY2012097)
Conference papers on the topic "Granularity deformation"
Zhao, Wenting, Yuan Fang, Zhen Cui, Tong Zhang, and Jian Yang. "Graph Deformer Network." In Thirtieth International Joint Conference on Artificial Intelligence {IJCAI-21}. California: International Joint Conferences on Artificial Intelligence Organization, 2021. http://dx.doi.org/10.24963/ijcai.2021/227.
Full text