Log in

Relevant bibliographies by topics / Glass roll

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Glass roll'

Author: Grafiati

Published: 28 June 2021

Last updated: 9 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Glass roll.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Glass roll"

1

Deus, Carsten, Jaroslava Salomon, and Uwe Wehner. "Roll-to-roll coating of flexible glass." Vakuum in Forschung und Praxis 28, no. 4 (September 2016): 40–44. http://dx.doi.org/10.1002/vipr.201600613.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Wang, Dongxiang, Jacqueline Hauptmann, and Christian May. "OLED Manufacturing on Flexible Substrates Towards Roll-to-Roll." MRS Advances 4, no. 24 (2019): 1367–75. http://dx.doi.org/10.1557/adv.2019.62.

Full text

Abstract:

ABSTRACTLarge area lighting OLEDs manufactured in a Roll-to-Roll (R2R) fashion enable the well-longed production capability with considerably high throughput based on flexible substrates, hence largely reduced OLED manufacturing cost. This paper will outline the present status of R2R OLED fabrication on ultra-thin glass with the focus on transparent OLED devices and how to perform segmentation by printing of silver- and dielectric pastes. Ultra-thin glass (UTG) is laminated on a PET film to avoid fabrication interruptions when glass cracks occur during the Roll-to-Roll process. The R2R fabricated flexible OLEDs also show key-values comparable to conventional OLEDs fabricated on small rigid glass in lab-scale.

APA, Harvard, Vancouver, ISO, and other styles

3

Reitz, G. M., Oscar R. K. Montedo, Orestes Estevam Alarcon, Dachamir Hotza, and A. P. Novaes de Oliveira. "Roll Pressed LZSA Glass-Ceramics." Advances in Science and Technology 45 (October 2006): 442–46. http://dx.doi.org/10.4028/www.scientific.net/ast.45.442.

Full text

Abstract:

This work reports some experimental results regarding to a Li2O-ZrO2-SiO2-Al2O3 (LZSA) sintered glass-ceramic material obtained by roll pressing of glass powders (mean particle size ≈ 5 μm) with an added (7 wt.%) inorganic material (bentonite) as binder. The composition was characterized using chemical analysis, laser-scattering particle size analysis, DTA, XRD, thermal expansion, modulus of rupture (MOR) and deep abrasion (DA) measurements as well as density measurements and SEM observations. From the results it was verified that the glass-ceramic materials obtained by sintering and controlled crystallization, in the 850-1030°C temperature range, of glass powders, have properties and characteristics decisively better than those of other traditionally used materials. It is concluded that roll pressing technology is a potential candidate to produce sintered glassceramics for many applications, such as, for example, large sheets panels for electrical and thermal insulation.

APA, Harvard, Vancouver, ISO, and other styles

4

Tamagaki, Hiroshi, Yoshimitu Ikari, and Naoki Ohba. "Roll-to-roll sputter deposition on flexible glass substrates." Surface and Coatings Technology 241 (February 2014): 138–41. http://dx.doi.org/10.1016/j.surfcoat.2013.10.056.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Garner, Sean, Scott Glaesemann, and Xinghua Li. "Ultra-slim flexible glass for roll-to-roll electronic device fabrication." Applied Physics A 116, no. 2 (May 15, 2014): 403–7. http://dx.doi.org/10.1007/s00339-014-8468-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Nirengi, Takayoshi, Masanori Umeya, and Daigo Morizumi. "38.2: Color Filters on Flexible Glass Substrates by Roll-to-Roll Processing." SID Symposium Digest of Technical Papers 43, no. 1 (June 2012): 501–2. http://dx.doi.org/10.1002/j.2168-0159.2012.tb05827.x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Fahland, Matthias, Olaf Zywitzki, Thomas Modes, Komal Vondkar, Torsten Werner, Clemens Ottermann, Markus Berendt, and Gerd Pollack. "Roll-to-roll sputtering of indium tin oxide layers onto ultrathin flexible glass." Thin Solid Films 669 (January 2019): 56–59. http://dx.doi.org/10.1016/j.tsf.2018.10.032.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Reihanian, M., M. Dashtbozorg, and SM Lari Baghal. "Fabrication of glass/carbon fiber-reinforced Al-based composites through deformation bonding." Journal of Composite Materials 53, no. 18 (February 26, 2019): 2531–43. http://dx.doi.org/10.1177/0021998319833004.

Full text

Abstract:

The goal of the present study is to fabricate the short fiber-reinforced metal matrix composites by accumulative roll bonding. Various mixtures of fibers including 100 glass, 95 glass/5 carbon and 80 glass/20 carbon (all in wt.%) were used as the reinforcement. In order to investigate the bonding quality at layer interface, the composites with various fiber mixtures were produced by cold roll bonding. The bonding strength of the composites under different processing conditions including the fiber mixture, reduction in thickness and post-rolling annealing was measured by the peeling test. The 95 glass/5 carbon mixture was used to fabricate the fiber-reinforced composite through accumulative roll bonding. The fiber distribution, tensile properties and wear behavior of the composite were investigated at various numbers of accumulative roll bonding cycle. It was found that during accumulative roll bonding, the fiber clusters were broken and fragmented into smaller pieces. Results showed that the tensile strength and wear resistance of the composite enhanced with increasing the number of accumulative roll bonding cycles.

APA, Harvard, Vancouver, ISO, and other styles

9

Cech, Vladimir, Ales Marek, Antonin Knob, Jan Valter, Martin Branecky, Petr Plihal, and Jiri Vyskocil. "Continuous surface modification of glass fibers in a roll-to-roll plasma-enhanced CVD reactor for glass fiber/polyester composites." Composites Part A: Applied Science and Manufacturing 121 (June 2019): 244–53. http://dx.doi.org/10.1016/j.compositesa.2019.03.036.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Bomer, Johan G., Alexander V. Prokofyev, Albert van den Berg, and Séverine Le Gac. "Wafer-scale fabrication of glass-FEP-glass microfluidic devices for lipid bilayer experiments." Lab Chip 14, no. 23 (2014): 4461–64. http://dx.doi.org/10.1039/c4lc00921e.

Full text

Abstract:

We report a wafer-scale fabrication process for the production of glass-FEP-glass microdevices using UV-curable adhesive (NOA81) as gluing material, which is applied on the glass substrates using an original “spin & roll” approach.

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Glass roll"

1

Woodward, Henry Canning. "Rock 'n' Roll Stew: The Rolling Stones and Blues Music through the Looking Glass of American Culture in the 1960's." W&M ScholarWorks, 1992. https://scholarworks.wm.edu/etd/1539625712.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Mikl, Marek. "Návrh přídavného pokládacího zařízení pro aplikaci rolí skelné geomříže GlasGrid®." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-442818.

Full text

Abstract:

The diploma thesis deals with the design of an additional device for the application of glass grid rolls GlasGrid® and functional calculations. Diploma thesis was created in collaboration with company Saint-Gobain ADFORS. The designed equipment must be able to lay all the currently produced sizes of the rolls, connectable to the widest possible range of laying machines and must be possible to transport the equipment over a longer distance. The laying equipment must also comply with the strength analysis and functional calculations.

APA, Harvard, Vancouver, ISO, and other styles

3

Vomacka, Peter. "The role of glass in engineering ceramics." Licentiate thesis, Luleå tekniska universitet, 1994. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-17749.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Mehmood, Arshad [Verfasser], Rolf [Akademischer Betreuer] Jakoby, and Klaus [Akademischer Betreuer] Solbach. "Dielectric Resonator Antenna and Array Concepts based on Glass, Ceramics and Glass-ceramics / Arshad Mehmood ; Rolf Jakoby, Klaus Solbach." Darmstadt : Universitäts- und Landesbibliothek Darmstadt, 2018. http://d-nb.info/1161846964/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Farano, Vincenzo. "An investigation into different phosphate glass processing routes and the role of phosphate glass in dental collagen-based scaffolds." Thesis, Lyon, 2018. http://www.theses.fr/2018LYSE1192/document.

Full text

Abstract:

This thesis concerns the development of a new series of Sr-doped phosphate-based glasses for biomedical applications. Such glasses in powder form are envisaged to have applications in novel composite restorations where the following is achievable: dentin cell-mediated bioremineralization, dental pulp regeneration and as carrier for therapeutics or antibacterial ions.The initial aim was to produce soluble porous phosphate glasses using the sol-gel method (phosphate-alkoxide based sol-gel process). Knowing the effect that the variation of Ca content has on the dissolution properties of the glass, a series of glasses where Ca was progressively increased at the expense of Na was produced. The structure of the prepared samples was probed by XRD, XRF and FTIR to confirm the successful synthesis of the target phosphate-based glass compositions. After that a promising methodology was established, attempts were made to replace Ca with Sr. Different Sr sources were used without success due to the difficulty to fully dissolve those precursors in the sol-gel mixture. Subsequently, the issue of the toxicity of some precursors and solvents used in the sol-gel procedure was recognised. To overcome this obstacle, efforts were made to replace the toxic precursor chemicals with safer ones. Nevertheless, due to the low solubility of some new precursors and the low reactivity of others, the sol-gel process did not proceed in a predictable and reproducible fashion. At this stage, the sol-gel route was put aside, and two alternative soft and water-based chemical approaches were experimented: the precipitation method and the coacervation process. The first one was found to be unsuitable for our needs for two main reasons: 1) the presence of Na in the composition generated a crystalline material (instead of a glassy amorphous one); 2) the Ca/P ratio of our composition fell in the range of crystalline phase by using this method. In addition, the yield was really low. The second method (coacervation process) was a complete success. The glassy nature of the materials obtained was proved by XRD and XRF and the surface features were tested by BET and SEM. The process was retained for a while as the preferred synthesis route and both the scale-up effect and the possibility to add Sr were analysed. The production scale of the material was increased by 5 times and different Sr sources were tested to find the best one. XRD and XRF analysis proved both the success of the scale-up and the incorporation of the Sr in glass composition
This thesis concerns the development of a new series of Sr-doped phosphate-based glasses for biomedical applications. Such glasses in powder form are envisaged to have applications in novel composite restorations where the following is achievable: dentin cell-mediated bioremineralization, dental pulp regeneration and as carrier for therapeutics or antibacterial ions.The initial aim was to produce soluble porous phosphate glasses using the sol-gel method (phosphate-alkoxide based sol-gel process). Knowing the effect that the variation of Ca content has on the dissolution properties of the glass, a series of glasses where Ca was progressively increased at the expense of Na was produced. The structure of the prepared samples was probed by XRD, XRF and FTIR to confirm the successful synthesis of the target phosphate-based glass compositions. After that a promising methodology was established, attempts were made to replace Ca with Sr. Different Sr sources were used without success due to the difficulty to fully dissolve those precursors in the sol-gel mixture. Subsequently, the issue of the toxicity of some precursors and solvents used in the sol-gel procedure was recognised. To overcome this obstacle, efforts were made to replace the toxic precursor chemicals with safer ones. Nevertheless, due to the low solubility of some new precursors and the low reactivity of others, the sol-gel process did not proceed in a predictable and reproducible fashion. At this stage, the sol-gel route was put aside, and two alternative soft and water-based chemical approaches were experimented: the precipitation method and the coacervation process. The first one was found to be unsuitable for our needs for two main reasons: 1) the presence of Na in the composition generated a crystalline material (instead of a glassy amorphous one); 2) the Ca/P ratio of our composition fell in the range of crystalline phase by using this method. In addition, the yield was really low. The second method (coacervation process) was a complete success. The glassy nature of the materials obtained was proved by XRD and XRF and the surface features were tested by BET and SEM. The process was retained for a while as the preferred synthesis route and both the scale-up effect and the possibility to add Sr were analysed. The production scale of the material was increased by 5 times and different Sr sources were tested to find the best one. XRD and XRF analysis proved both the success of the scale-up and the incorporation of the Sr in glass composition

APA, Harvard, Vancouver, ISO, and other styles

6

Berg, Jolyon. "The role of fibre coatings on interphase formation in glass fibre epoxy resin composites." Thesis, University of Sheffield, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.245546.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Jones, Adam C. "Defensive synergy : the antipredatory role of glass spicules in Caribbean Demosponges /." Electronic version (PDF), 2004. http://dl.uncw.edu/etd/2004/jonesa/adamjones.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Liardet, Frances. "Role of craft practice in changing glass working traditions : the formation of glass vessels in the Classical and Hellenistic Mediterranean world." Thesis, Cardiff University, 2011. http://orca.cf.ac.uk/54457/.

Full text

Abstract:

This study combines a theoretical modelling of dexterity with a practical apprenticeship in glass-working in order to examine a group of core-formed glass alabastra from Mediterranean Group I (c.525 to c.400 BCE). Core-formed vessels were made by forming glass around an internal mould which was scraped out after the vessel had cooled. The core-forming tradition lasted from c.1500 BCE until c.100 BCE. Mediterranean Group I is of interest because of the wide variety of consistency displayed in body shaping, rim and handle making, and decoration. To understand this variety it was necessary to undertake a theoretical and practical investigation of skill. The theoretical investigation revealed that skill has been conventionally analysed in terms of knowledge. This cognition-based analysis ignores the dimension of moving, specifically of the skilled gesture and the process of becoming dexterous. The practical apprenticeship demonstrated that this process, as a kinaesthetic experience, is value-positive - that is to say, it gives rise to value judgements on artefact feature, gesture in synergy with tools and materials, and craft working behaviour. This remodelling of skill allows one to form a gestural as opposed to a feature-based artefact typology and in so doing to identify, not simply distinct communities of practice, but different types of communities whose judgements arose out of the experience of becoming dexterous. Redefined in this way skilled making can be repositioned within archaeological theory as a central mode of interaction with the material world, a mode which has the intrinsic potential to generate value and social meaning.

APA, Harvard, Vancouver, ISO, and other styles

9

Carlson, Eric C. "The role of lumican in the formation of bio-glass transparent cornea /." Cincinnati, Ohio : University of Cincinnati, 2002. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=ucin1044293658.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

CARLSON, ERIC CURTIS. "THE ROLE OF LUMICAN IN THE FORMATION OF BIO-GLASS: TRANSPARENT CORNEA." University of Cincinnati / OhioLINK, 2003. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1044293658.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Glass roll"

1

Sjöstrand, Eva. Rolf Sinnemark: Glaskonstnär, formgivare och fiskare. Malmö: Bokförlaget Arena, 2011.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Sjöstrand, Eva. Rolf Sinnemark: Glaskonstnär, formgivare och fiskare. Malmö: Bokförlaget Arena, 2011.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Heart of glass. New York: Delacorte Press, 2013.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Hemphill, Stephanie. Sisters of glass. New York: Alfred A. Knopf, 2012.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Through the looking glass: Women and borderline personality disorder. Boulder, Colo: Westview Press, 1997.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Wickramasinghe, Maithree. Beyond glass ceilings and brick walls: Gender at the workplace. Colombo: International Labour Organization, 2005.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Words like colored glass: The role of the press in Taiwan's democratization process. Boulder: Westview Press, 1992.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Stanley, Diane. Bella at Midnight: The Thimble, the Ring, and the Slippers of Glass. New York: HarperCollins, 2006.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Stanley, Diane. Bella at midnight: The thimble, the ring, and the slippers of glass. New York: HarperCollins, 2006.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Geeslin, Campbell. Elena's serenade. New York: Atheneum Books for Young Readers, 2004.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Glass roll"

1

Switzer, James C., and Mark D. Poliks. "Roll-to-Roll Processing of Flexible Glass." In Flexible Glass, 85–127. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2017. http://dx.doi.org/10.1002/9781118946404.ch4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Brackley, Doug, Dale Marshall, Gary Merz, and Eric Miller. "Roll-to-Roll Processing of Glass." In Roll-to-Roll Manufacturing, 251–60. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2018. http://dx.doi.org/10.1002/9781119163824.ch8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Reitz, G. M., Oscar R. K. Montedo, Orestes Estevam Alarcon, Dachamir Hotza, and A. P. Novaes de Oliveira. "Roll Pressed LZSA Glass-Ceramics." In Advances in Science and Technology, 442–46. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/3-908158-01-x.442.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Grydin, Olexandr, Mykhailo Stolbchenko, and Mirko Schaper. "Twin-Roll Casting of Carbon Fiber-Reinforced and Glass Fiber-Reinforced Aluminum Strips." In Light Metals 2016, 1007–12. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2016. http://dx.doi.org/10.1002/9781119274780.ch168.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Grydin, Olexandr, Mykhailo Stolbchenko, and Mirko Schaper. "Twin-Roll Casting of Carbon Fiber-Reinforced and Glass Fiber-Reinforced Aluminum Strips." In Light Metals 2016, 1007–12. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-48251-4_168.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Manton, David John, and Katie Bach. "The Role of Glass-ionomers in Paediatric Dentistry." In Glass-Ionomers in Dentistry, 113–23. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-22626-2_6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Banerjee, Avijit. "The Role of Glass-Ionomer Cements in Minimum Intervention (MI) Caries Management." In Glass-Ionomers in Dentistry, 81–96. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-22626-2_4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Moschkovich, Marília. "Beyond the Academic Glass Ceiling: Notes on the Situation of Women Professors in Brazil." In The Changing Role of Women in Higher Education, 291–310. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-42436-1_15.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Thomas, T. M., D. L. Williamson, and D. P. Rainville. "Role of Tin Complexes in Bonding Silver to Glass: Mössbauer Studies." In Industrial Applications of the Mössbauer Effect, 715–23. Boston, MA: Springer US, 1986. http://dx.doi.org/10.1007/978-1-4613-1827-9_40.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Zürcher, U., and T. Keyes. "Soft Modes in Glass-Forming Liquids: The Role of Local Stress." In ACS Symposium Series, 82–94. Washington, DC: American Chemical Society, 1997. http://dx.doi.org/10.1021/bk-1997-0676.ch006.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Glass roll"

1

Tamagaki, H., Y. Ikari, and N. Ohba. "Roll-to-Roll Sputter Deposition on Flexible Glass Substrates." In Society of Vacuum Coaters Annual Technical Conference. Society of Vacuum Coaters, 2013. http://dx.doi.org/10.14332/svc13.proc.1066.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Fahland, Matthias. "Roll-to-Roll Sputter Deposition of Low Resistance Electrodes on Ultrathin Glass." In 62nd Society of Vacuum Coaters Annual Technical Conference. Society of Vacuum Coaters, 2019. http://dx.doi.org/10.14332/svc19.proc.0044.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Hu, Chia-Nying, and Guo-Dung J. Su. "Fabrication of microlens arrays on a glass substrate by roll-to-roll process with PDMS mold." In SPIE Optical Engineering + Applications, edited by Joseph L. Robichaud and William A. Goodman. SPIE, 2009. http://dx.doi.org/10.1117/12.826058.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Phillips, Donald R. "Field Comparison of the Retention Properties of Pre-Fractured Heat Strengthened Laminated Glass to Tempered Glass in Factory Door Seals." In ASME 2008 International Mechanical Engineering Congress and Exposition. ASMEDC, 2008. http://dx.doi.org/10.1115/imece2008-68418.

Full text

Abstract:

This current study was performed to investigate the performance difference between production tempered side glazing and modern heat-strengthened laminated glass when tested with a controlled one-quarter roll where the door-mounted rearview mirror was targeted to pre-fracture the glazing. Then push out and abuse impact demonstrations were conducted on the glazing. The results of the demonstration were observed and photographed. Only unmodified, commercial glazing was used in windows that were retained in a vehicle-mounted, framed driver’s door. The testing indicates that by using laminated glass, occupant retention can be realized, significantly lowering the potential for partial or full ejection and their associated heightened injury risk.

APA, Harvard, Vancouver, ISO, and other styles

5

Yang, Tian-Shiang, Guang-Di Chen, Kuo-Shen Chen, Rong-Can Hong, Tz-Cheng Chiu, Chang-Da Wen, Chun-Han Li, Chien-Jung Huang, Kun-Tso Chen, and Mao-Chi Lin. "Thermal Analysis of a Laser Peeling Technique for Removing Micro Edge Cracks of Ultrathin Glass Substrates for Web Processing." In ASME 2015 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/imece2015-50316.

Full text

Abstract:

Ultrathin glass is a promising substrate material for web processing (also called roll-to-roll processing) of flexible electronics, but is highly susceptible to breaking and cracking due to the almost inevitable presence of substrate-edge defects. Recently, a novel technique for removing the micro cracks on the edges of ultrathin glass substrates was devised at ITRI. It amounts to shining a CO2 laser on one edge of a substrate, which induces spontaneous peeling of a thin layer containing preexisting cracks on the edge from the substrate, resulting in an essentially crack-free new substrate edge. Exploiting the thinness of ultrathin glass substrates, here we propose a simplified two-dimensional thermal model for the laser peeling process, and obtain an analytic expression for the transient temperature variation in a substrate being peeled. This enables us to locate the “thermally affected zone” in the substrate, which turns out to be impressively similar in size and shape to the substrate-edge peels observed in experiments. Moreover, a quantitative criterion for the minimum cooling rate required for the progression of the peeling process is obtained. The results here thus provide useful insights into the laser peeling mechanism, and can be used to expedite the optimization of process parameters. Some preliminary purely numerical results using a finite element method (FEM) based software also are briefly discussed here.

APA, Harvard, Vancouver, ISO, and other styles

6

Krogh, C., J. Kepler, and J. Jakobsen. "It‘s on a Roll: Draping Courses of Glass Fiber Fabric in a Wind Turbine Blade Mold by Means of Optimization." In VIII Conference on Mechanical Response of Composites. CIMNE, 2021. http://dx.doi.org/10.23967/composites.2021.053.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Phillips, Donald R., and Stephen A. Batzer. "Automotive Laminated Side Glazing Rollover Performance When Subjected to Roadway Abrasion and Occupant Loading." In ASME 2019 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/imece2019-10238.

Full text

Abstract:

Abstract Destructive testing of commercial automotive movable laminated side glass was conducted to document the occupant retention characteristics of this glazing system in quarter-roll crashes with a prolonged slide distance. That is, in some overturns a vehicle will slide to a halt on its side with a window adjacent both to an occupant’s position and to the moving roadway. It is known by field experience that this situation can result in injurious ejection of the occupant through the adjacent window if the window is constructed of tempered glass and the window has fractured. When tempered glass fractures, the window disintegrates and fully opens the portal. With the laminated side glazing that is used on some passenger vehicles, fracture of the inboard and outboard glass plies will not necessarily cause the “sandwiched” PVB interlayer to be compromised. This PVB interlayer allows the glass plies to remain in place and resist the sliding interaction. This diminishes the ejection hazard that is associated with tempered side glass. The three drag tests described within this technical paper used a single model of sport utility vehicle driver’s position door and factory installed laminated side door glass. The testing replicated the interaction of the exterior surface of the laminated glass against the moving roadway while the glazing was pre-fractured and the interior glass ply was subjected to significant simulated occupant loading. These conditions ensured contact of the exterior glass ply against the moving abrasive roadway. The detached and slightly modified driver’s door was pulled at near highway speed over a substantial distance against abrasive asphalt, simulating a rollover accident with the side of the vehicle sliding to halt. The results of these tests show that the exterior surface of the glazing, primarily consisting of the hard ceramic SiO2, is sufficiently wear resistant and durable to wear but not rupture or pull out of the peripheral channel. This testing shows that laminated glass is the superior glazing material for this accident mode from an occupant containment perspective.

APA, Harvard, Vancouver, ISO, and other styles

8

Omasta, Milan, Ivan Krupka, and Martin Hartl. "Study of Elastohydrodynamic Film Shape Under Different Directions of Velocity Vectors." In ASME/STLE 2011 International Joint Tribology Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/ijtc2011-61259.

Full text

Abstract:

Some machines elements such as hypoid gears and Wildhaber-Novikov gears works under conditions where the surface velocities are variously oriented, thus the entrainment and sliding velocities act at different directions. The influence of sliding velocity vector direction with respect to entrainment velocity vector has not been sufficiently determined yet. So, the aim of current experimental study is to investigate effect of slide-to-roll ratio and direction of sliding velocity vector with respect to entrainment velocity vector on elastohydrodynamic (EHD) film thickness using thin-film colorimetric interferometry in smooth glass-steel point contact.

APA, Harvard, Vancouver, ISO, and other styles

9

Yoon, Deokkyun, and Seung-Hyun Lee. "Precision Gravure Printing of Conductive Ink on Flexible Substrate for Printed Electronics." In ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-87243.

Full text

Abstract:

In attempt to lower the production cost, roll-to-roll printing is gaining attention in electronics industries. Gravure printing, which has been the method of choice in the graphics industry for years thanks to its high resolution and process speed, is utilized to print conductive lines on flexible substrate. The main benefactors of such utilization are touch screen panel, RFID tags, thin film photovoltaics, and printed circuit board industries. The preferred substrate for conductive line printing is polymer. Due to its highly flexible nature, the printed electronics is highly flexible and is expected to create new markets where the rigid silicon and glass based electronics could not. In this work, the effect of gravure cell and trench on printing thin conductive lines as low as 20 μm line width on the polyethylene terephthalate (PET) substrate is presented. Various printing orientations including the machine direction, the cross direction, and the 45° grid mesh are used and the respective orientation’s printability is discussed.

APA, Harvard, Vancouver, ISO, and other styles

10

Wada, Yuki, Dan Le, Akira Satou, Yasuteru Sibamoto, and Taisuke Yonomoto. "On the Liquid Film Flow Characteristics During the Rewetting in the Single Rod Air-Water System." In 2018 26th International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/icone26-82491.

Full text

Abstract:

Dry-out and rewetting phenomenon may occur on a fuel rod surface during anticipated operational occurrences (AOOs) for a boiling water reactor (BWR). The conventional rewetting model included in the current system code tends to underestimate the rewetting propagation velocity due to the absence of an appropriate precursory cooling model. The present research aims at the development of a mechanistic model for the precursory cooling in the annular mist flow regime typical of AOO and anticipated transition without scrum (ATWS). Rewetting experiments were carried out using a single heater rod in the circular glass pipe with air-water flow at atmospheric pressure to visualize the rewetting behavior and obtain mechanistic understanding on the phenomena. This paper summarizes the experimental results and discusses the liquid film flow characteristics including roll wave formation and spattering at the rewetting front.

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Glass roll"

1

Blane, Kyle, Dnate Myers, David Rodriguez, Joseph R. Vanstrom, and Jacek A. Koziel. Cardinal Glass Take up Masking Rolls. Ames: Iowa State University, Digital Repository, April 2018. http://dx.doi.org/10.31274/tsm416-180814-26.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Strachan, Denis M., and Eric M. Pierce. Ancient Glass: A Literature Search and its Role in Waste Management. Office of Scientific and Technical Information (OSTI), July 2010. http://dx.doi.org/10.2172/1009767.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Lewis, L. A. The Origin of Agglomerates and their Role in Forming Near-Surface Glassy Fallout. Office of Scientific and Technical Information (OSTI), November 2018. http://dx.doi.org/10.2172/1490957.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!