Books on the topic 'Gearing, spur'

Hirt, Manfred Christian Otto. Stresses in spur gear teeth and their strength as influenced by fillet radius: Doctorate dissertation. Arlington, Va: American Gear Manufacturers Association, 1985.

Litvin, F. L. Spur gears: Optimal geometry, methods for generation and tooth contact analysis (TCA) program. [Washington, DC]: National Aeronautics and Space Administration, Scientific and Technical Information Division, 1988.

General spatial involute gearing. Berlin: Springer, 2003.

Oswald, Fred B. Effect of operating conditions on gearbox noise. Cleveland, Ohio: National Aeronautics and Space Administration, Lewis Research Center, 1992.

Lin, Hsiang Hsi. Profile modification to minimize spur gear dynamic loading. [Washington, DC: National Aeronautics and Space Administration, 1988.

Lewicki, David G. Predicted effect of dynamic load on pitting fatigue life for low-contact-ratio spur gears. [Washington, DC]: National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1986.

Ivanov, I. P. Zubchatye peredachi s kombinirovannym smeshcheniem: Osnovy teorii i raschetov. Leningrad: Izd-vo Leningradskogo universiteta, 1989.

The geometry of involute gears. New York: Springer-Verlag, 1987.

Kalashnikov, Aleksandr Sergeevich. Kompleksnai͡a︡ avtomatizat͡s︡ii͡a︡ proizvodstva zubchatykh koles. Moskva: "Mashinostroenie", 1991.

Townsend, Dennis P. Surface pitting fatigue life of noninvolute, low-contact-ratio gears. [Washington, D.C.]: NASA, 1990.

Courtney, Lloyd. Software for the design of spur gears. Dublin: University College Dublin, 1997.

Mizutani, Hachiro. Effects of lubrication on the performance of high speed spur gears. [Washington, D.C.]: National Aeronautics and Space Administration, 1989.

Zhi chi lun leng duan cheng xing gong yi ji jing du kong zhi yan jiu. Hefei Shi: Hefei gong ye da xue chu ban she, 2012.

Singh, Rajendra. Non-linear dynamic analysis of geared systems. [Columbus, Ohio]: The Ohio State University, Dept. of Mechanical Engineering, 1990.

Singh, Rajendra. Non-linear dynamic analysis of geared systems. [Columbus, Ohio]: The Ohio State University, Dept. of Mechanical Engineering, 1990.

N, Bamberger Eric, United States. Army Aviation Systems Command., and United States. National Aeronautics and Space Administration., eds. Surface fatigue life of M50NiL and AISI 9310 spur gears and R C bars. [Washington, DC]: National Aeronautics and Space Administration, 1991.

R, Patel P., and United States. National Aeronautics and Space Administration., eds. Surface fatigue life of CBN and vitreous ground carburized and hardened AISI 9310 spur gears: Dennis P. Townsend and P.R. Patel. [Washington, D.C.]: National Aeronautics and Space Administration, 1988.

V, Zaretsky Erwin, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch, eds. Effect of five lubricants on life of AISI 9310 spur gears. [Washington, D.C.?]: National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1985.

V, Zaretsky Erwin, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch., eds. Effect of five lubricants on life of AISI 9310 spur gears. [Washington, D.C.?]: National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1985.

V, Zaretsky Erwin, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch., eds. Effect of five lubricants on life of AISI 9310 spur gears. [Washington, D.C.?]: National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1985.

N, Bamberger Eric, United States. Army Aviation Systems Command., and United States. National Aeronautics and Space Administration., eds. Surface fatigue life of M50NiL and AISI 9310 spur gears and R C bars. [Washington, DC]: National Aeronautics and Space Administration, 1991.

J, Zakrajsek James, United States. National Aeronautics and Space Administration., and U.S. Army Research Laboratory., eds. Evaluation of a vibration diagnostic system for the detection of spur gear pitting failures. [Washington, DC: National Aeronautics and Space Administration, 1993.

1937-, Huston Ronald L., Oswald Fred B, United States. Army Aviation Research and Technology Activity., and United States. National Aeronautics and Space Administration., eds. Contact stresses in meshing spur gear teeth: Use of an incremental finite element procedure. [Washington, D.C.?]: National Aeronautics and Space Administration, 1992.

Dynamic loading of spur gears with linear or parabolic tooth profile modifications. [Washington, DC]: National Aeronautics and Space Administration, 1989.

United States. Army Aviation Systems Command. and United States. National Aeronautics and Space Administration., eds. Spur-gear optimization using SPUROPT computer program. [Washington, DC]: National Aeronautics and Space Administration, 1991.

United States. Army Aviation Systems Command. and United States. National Aeronautics and Space Administration., eds. Spur-gear optimization using SPUROPT computer program. [Washington, DC]: National Aeronautics and Space Administration, 1991.

United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch., ed. Surface fatigue life and failure characteristics of EX-53, CBS 1000M, and AISI 9310 gear materials. [Washington, DC]: National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1985.

T, Shimski John, United States. Army Aviation Systems Command., and United States. National Aeronautics and Space Administration., eds. Effect of two synthetic lubricants on life of AISI 9310 spur gears. [Washington, DC]: National Aeronautics and Space Administration, 1991.

B, Oswald Fred, Townsend Dennis P, and United States. National Aeronautics and Space Administration., eds. Dynamic loading of spur gears with linear or parabolic tooth profile modifications. [Washington, DC]: National Aeronautics and Space Administration, 1989.

N, Bamberger Eric, United States. Army Aviation Research and Technology Activity., and United States. National Aeronautics and Space Administration., eds. Surface fatigue life of carburized and hardened M50NiL and AISI 9310 spur gears and rolling-contact test bars. [Washington, DC]: National Aeronautics and Space Administration, 1989.

P, Townsend Dennis, and United States. National Aeronautics and Space Administration., eds. Lubricant jet flow phenomena in spur and helical gears with modified addendums-- for radially directed individual jets. [Washington, DC]: National Aeronautics and Space Administration, 1989.

Dynamic loading on parallel shaft gears. [Washington, D.C: National Aeronautics and Space Administration, 1986.

W, Shuey L., and Lewis Research Center, eds. An investigation of the dynamic response of spur gear teeth with moving loads. [Cleveland, Ohio]: National Aeronautics and Space Administration, 1987.

W, Shuey L., and Lewis Research Center, eds. An investigation of the dynamic response of spur gear teeth with moving loads. [Cleveland, Ohio]: National Aeronautics and Space Administration, 1987.

Florea, Dudiță, and Jula A, eds. Proiectarea angrenajelor evolventice. Craiova: Scrisul Românesc, 1989.

United States. Army Aviation Systems Command. and United States. National Aeronautics and Space Administration., eds. Surface pitting fatigue life of noninvolute, low-contact-ratio gears. [Washington, D.C.]: NASA, 1990.

Buckingham, Earle, and Eliot Buckingham. Manual of Gear Design: Spur and Internal Gears. Industrial Press, Inc., 1999.

V, Zaretsky Erwin, Scibbe Herbert W, and Lewis Research Center, eds. Lubricant and additive effects on spur gear fatigue life. Cleveland, Ohio: Lewis Research Center, 1985.

Spur and Bevel Gearing: A Treatise on the Principles, Dimensions, Calculation, Design and Strength of Spur and Bevel Gearing, Together with Chapters on Special Tooth Forms and Methods of Cutting Gear Teeth. Creative Media Partners, LLC, 2018.

Spur and Bevel Gearing: A Treatise on the Principles, Dimensions, Calculation, Design and Strength of Spur and Bevel Gearing, Together with Chapters on Special Tooth Forms and Methods of Cutting Gear Teeth. Creative Media Partners, LLC, 2018.

Beowulf. Spur and Bevel Gearing: A Treatise on the Principles, Dimensions, Calculation, Design and Strength of Spur and Bevel Gearing, Together with Chapters on Special Tooth Forms and Methods of Cutting Gear Teeth. Creative Media Partners, LLC, 2015.

Non-linear dynamic analysis of geared systems. [Washington, D.C.]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division, 1990.

Cromwell, John Howard. A Treatise on Toothed Gearing: Containing Complete Instructions for Designing, Drawing, and Constructing Spur Wheels, Bevel Wheels, Lantern Gear, ... For the Use of Machinists, Pattern-Make. Franklin Classics Trade Press, 2018.

Cromwell, John Howard. Treatise on Toothed Gearing. Containing Complete Instructions for Designing, Drawing, and Constructing Spur Wheels, Bevel Wheels, Laterns Gear, Screw Gear, Worms, etc. , and the Proper Formation of Tooth-Profiles. for the Use of Machinists, Pattern-maker. Creative Media Partners, LLC, 2018.

Cromwell, John Howard. Treatise on Toothed Gearing : Containing Complete Instructions for Designing, Drawing, and Constructing Spur Wheels, Bevel Wheels, Lantern Gear, Screw Gear, Worms, etc. , and the Proper Formation of Tooth-Profiles: For the Use of Machinists, Pattern-Make. Creative Media Partners, LLC, 2018.