Academic literature on the topic 'Galvanizing process'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Galvanizing process.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Galvanizing process":
Cai, Xing Fu, Yong Zhi Huang, Yun Gang Li, and Li Na Zhao. "Production Process and Technology Development of Hot-Dip Galvanizing." Applied Mechanics and Materials 488-489 (January 2014): 61–65. http://dx.doi.org/10.4028/www.scientific.net/amm.488-489.61.
Kopyciński, Dariusz, and Edward Guzik. "Intermetallic Phases Formation in Hot Dip Galvanizing Process." Solid State Phenomena 197 (February 2013): 77–82. http://dx.doi.org/10.4028/www.scientific.net/ssp.197.77.
Liu, Qi, Yuqing Cao, Shuai Chen, Xinye Xu, Mutian Yao, Jie Fang, Kuan Lei, and Guiqun Liu. "Hot-Dip Galvanizing Process and the Influence of Metallic Elements on Composite Coatings." Journal of Composites Science 8, no. 5 (April 25, 2024): 160. http://dx.doi.org/10.3390/jcs8050160.
Sepper, Sirli, Priidu Peetsalu, Mart Saarna, Valdek Mikli, and Priit Kulu. "Effect of Hot Dip Galvanizing on the Mechanical Properties of High Strength Steels." Key Engineering Materials 604 (March 2014): 12–15. http://dx.doi.org/10.4028/www.scientific.net/kem.604.12.
Kania, Henryk, Jacek Mendala, Jarosław Kozuba, and Mariola Saternus. "Development of Bath Chemical Composition for Batch Hot-Dip Galvanizing—A Review." Materials 13, no. 18 (September 19, 2020): 4168. http://dx.doi.org/10.3390/ma13184168.
Costa, Altamirano, Salinas, González-González, and Goodwin. "Optimization of the Continuous Galvanizing Heat Treatment Process in Ultra-High Strength Dual Phase Steels Using a Multivariate Model." Metals 9, no. 6 (June 21, 2019): 703. http://dx.doi.org/10.3390/met9060703.
Knop, Krzysztof. "Analysis and Improvement of the Galvanized Wire Production Process with the use of DMAIC Cycle." Quality Production Improvement - QPI 1, no. 1 (July 1, 2019): 551–58. http://dx.doi.org/10.2478/cqpi-2019-0074.
Álló, Štefan, Vladimir Kročko, Maroš Korenko, Zuzana Andrássyová, and Daniela Földešiová. "Effect of Chemical Degreasing on Corrosion Stability of Components in Automobile Industry." Advanced Materials Research 801 (September 2013): 19–23. http://dx.doi.org/10.4028/www.scientific.net/amr.801.19.
Kopyciński, D., E. Guzik, A. Szczęsny, and D. Siekaniec. "Diffusion Coefficient in the Zinc Coating Shaped on the Surface of Cast Iron and Steel Alloys." Archives of Foundry Engineering 15, no. 2 (June 1, 2015): 43–46. http://dx.doi.org/10.1515/afe-2015-0035.
Hocking, G. C., W. L. Sweatman, A. D. Fitt, and C. Breward. "Deformations during jet-stripping in the galvanizing process." Journal of Engineering Mathematics 70, no. 1-3 (July 27, 2010): 297–306. http://dx.doi.org/10.1007/s10665-010-9394-8.
Dissertations / Theses on the topic "Galvanizing process":
RANJAN, MADHU. "INFLUENCE OF SILICON ON GALVANIZING REACTIONS IN A ZINC-ALUMINUM BATH." University of Cincinnati / OhioLINK, 2005. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1112656227.
Brakna, Mohammed. "Sensor and actuator optimal location for dynamic controller design. Application to active vibration reduction in a galvanizing process." Electronic Thesis or Diss., Université de Lorraine, 2023. https://docnum.univ-lorraine.fr/ulprive/DDOC_T_2023_0152_BRAKNA.pdf.
The aims of the present PhD thesis are to determine a model that is both sufficiently accurate and numerically exploitable to propose optimal placement of sensors and actuators for active vibration control in a galvanizing line. A continuous hot-dip galvanizing process consists in covering a metal (here: a steel band) by a protective layer of zinc which avoids the corrosion due to the air. The thickness of this layer must be constant to guarantee the mechanical properties and surface condition of the product. In a galvanizing line, the moving steel strip is heated and then immersed in a liquid zinc bath before being wiped out by nozzles projecting air. The air flow, as well as the rotation of the driving rolls, among other things, creates vibrations affecting the wiping process and thus the regularity of the zinc deposit. Active control is therefore necessary, for example by means of electromagnets placed on either side of the moving steel strip. In a first step, a behavioral model of the steel strip taking into account the presence and propagation of vibrations was obtained by spatial discretization of a partial differential equation. This state space model was validated in simulation and experimentally on a pilot galvanizing line of ArcelorMittal Research in Maizières-lès-Metz. Once this model is established, the objective of the study is to find the optimal placement of sensors, to measure the vibrations of the strip as efficiently as possible, but also of actuators to minimize the amplitude of these vibrations by an appropriate control law. These problems of optimal placement are at the heart of the issues of active vibration control and are found in many fields of application. An optimal placement method based on Gramian maximization has been proposed in order to reduce the impact of disturbances on the system. Different control strategies have been considered such as (i) observed state feedback based on Kalman filter and LQ regulator; and (ii) extended observed state feedback to improve the results by also taking into account the disturbance estimation provided by a PI (proportional-integral) observer. Simulation and experimental results illustrate the thesis contributions
Stahlschmidt, Marcelo Franzkowiak. "Estudo do processo de recozimento em linha de galvanização : caracterização e implicações inerentes ao arraste de chumbo." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2010. http://hdl.handle.net/10183/32015.
The present work describe the experiments carried out based on the wire drawing process analysis and later annealing on lead furnace on a galvanizing line. Using D.O.E methodology, the aim is to understand the occurrence of lead entrainment originating from the annealed wires in order to decrease this problem. Wire samples were collected from wire drawing machines and galvanizing line and submitted to surface roughness analysis and its implications on lead drag out based on wire speed, wire diameter, lead bath temperature, thermal capacity of the lead kettle, wire surface condition, wire roughness and wire superficial cleanliness. Proposals to decrease lead drag out were made in order to increase wire drawing machines and galvanizing line performance.
Ferrari, Jean Vicente. "Contaminação com sal de cloreto e cromatização da superfície do aço zincado no processo não-contínuo de zincagem por imersão a quente: influência no desempenho de tintas e determinação de pré-tratamentos para pintura adequados." Universidade de São Paulo, 2006. http://www.teses.usp.br/teses/disponiveis/3/3133/tde-05092006-124730/.
The batch galvanizing process (BGP) can lead to surface contamination of hot-dip galvanized steel (HDGS) with chloride residues. If these residues are not effectively eliminated, they can influence negatively on the performance of duplex systems (galvanizing plus painting). It is known that the chromate quenching is widely used in the BGP, however the effect of this post-treatment on the performance of duplex systems is not well established yet. In this sense, this work aimed: I to verify the contamination degree of HDGS with chloride salt due to the BGP itself; II to verify the effects of the chloride salt contamination and chromate quenching on the performance of paints applied on HDGS; and III to determine the suitable surface preparation for painting in order for obtaining a good paint performance applied on HDGS. The adopted methodology to achieve goal I involved the galvanizing of steel plates in different service renderings with BGP, in different conditions. These HDGS plates were submitted to the qualitative energy dispersive microanalyses (EDS) in scanning electron microscopy (SEM) and to the determination of superficial chloride contents by the boiling water extraction method. From the obtained results, the conditions in the BGP that potentially lead to greater surface contamination of HDGS with chloride salt were determined. Thus, to achieve goals II and III, steel plates were galvanized under the maximum chloride salt contamination condition and part of them were submitted to chromate quenching. After that, a great part of these HDGS plates (chromated or non chromated quenching) was submitted to the surface preparations for painting through organic solvent cleaning, high pressure hydroblasting, sweep blasting and handled scrub cleaning with an abrasive sponge and hot distilled water. Finally, the HDGS plates, including those not submitted to the surface preparations for painting, were painted with one coat of primer plus one coat of finishing paint. The HDGS painted plates were submitted to accelerated (distilled water immersion and humidity chamber exposure) and non accelerated (atmospheric exposure) corrosion tests and their performance were verified by means of traditional tests (degree of blistering and paint adhesion) and electrochemical measurements (open circuit potential, polarization curve and electrochemical impedance spectroscopy E.I.S.). Before painting, some HDGS plates were submitted to tests for physical (microstructural and morphological analyses in MEV and surface roughness), chemical (EDS, X-ray diffraction and superficial chloride contents by the boiling water extraction method) and electrochemical characterization. The obtained results allowed verifying that the additional application of solid ammonium chloride salt during the BGP tends to increase the degree of superficial chloride contamination of the HDGS and, the water and/or chromate quenching also contribute for this contamination. In general, the chromated HDGS presented worst performances. The high pressure hydroblasting and the handled scrub cleaning with an abrasive sponge and hot distilled water were the surface preparations for painting that provided the best performances of paint systems.
Andara, Flávio Roberto. "AVALIAÇÃO DE UM PROCESSO DE ELETROGALVANIZAÇÃO POR MEIO DE MODELAGEM ESTATÍSTICA E CARTAS DE CONTROLE." Universidade Federal de Santa Maria, 2015. http://repositorio.ufsm.br/handle/1/8364.
As ferramentas da qualidade, mais especificamente as cartas de controle, são importantes recursos estatísticos para se conhecer e monitorar processos produtivos, sendo que seu objetivo é encontrar as causas comuns e assinaláveis de um processo para, com seu monitoramento, aumentar sua estabilidade e, a partir daí, considerar se o processo está sob controle. A dinâmica das atividades industriais hoje existentes fez surgir novas necessidades para um bom monitoramento, e, nesse sentido, novas ferramentas de controle foram desenvolvidas, capazes de entender as novas relações causais entre as variáveis. A pesquisa apresenta o uso de três metodologias de modelagem para tratar dados autocorrelacionados possibilitando o monitoramento de um processo produtivo de eletrogalvanização. Inicialmente foi realizada uma análise descritiva para a verificação de pressupostos de normalidade e independência e após foram ajustados os modelos ARIMA de Box e Jenkis, modelos ARMAX e modelos de regressão linear múltipla, MRLM, para posterior construção das cartas de controle dos resíduos. Além do conhecimento acadêmico proporcionado, apresenta mais de uma aplicação das cartas de controle ao ambiente industrial, e também colabora com a empresa onde a pesquisa foi desenvolvida mostrando qual das metodologias é mais efetiva no controle da produção. O melhor resultado de monitoramento obtido com o trabalho estatístico nessas três metodologias quando confrontado com o método de controle convencional, ou seja, sem tratar a autocorrelação foi utilizando a modelo ARIMA e posterior aplicação dos gráficos de controle de resíduos oriundos desta modelagem. A decisão da metodologia de modelagem mais eficaz para a eletrogalvanização foi definida pelo número de pontos encontrados fora dos limites convencionais estabelecidos. A que melhor captou as flutuações do processo foi a obtida com os resíduos do ARIMA.
Brepohl, Danielle Cristina de Campos Silva. "Caracterização das camadas formadas no processo de galvanização à quente sobre uma chapa de aço livre intersticiais." Universidade Tecnológica Federal do Paraná, 2013. http://repositorio.utfpr.edu.br/jspui/handle/1/567.
The automobile industry, when seeking to increase warranty against corrosions, employs galvanized IF (intersticial free) steels to the body shell, since these meet the superficial, compliance, weldability and other quality criteria. In this context, the corrosion resistance of an IF steel with galvanic coating (GI) and different weights (85 g/m2 (Z85), 100 g/m2 (Z100), 120 g/m2 (Z120), 144 g/m2 (Z144) and 180 g/m2 (Z180), phosphated and with cataphoresis, were evaluated through an accelerated cyclical corrosion experiment. The result of this experiment showed that even with the variation of the galvanic coating (GI) the result of the corrosion resistance was the same, leading to the hypothesis that the intermetallic layer which is present in all samples, regardless of the weight, must influence corrosion resistance. Thus, supplementary experiments were done to comprehend the effect of the zinc layer and the intermetallic layer in corrosion resistance. The characterization of the layers formed in the GI galvanizing process was done in the Z100 (100g/m²) sample. This sample was chosen because it is the most used in the automobile industry and it did not suffer any previous treatment since the objective was to analyze only the layers of galvanized GI. The experiments done were in the microstructure (XRD, MEV and EDS) and electrochemical experiment (potenciodinamic polarization). We concluded that the intermetallic layer is formed by phases Fe2Al5 and FeAl3, with predominance of phase Fe2Al5. It was verified through the electrochemical dissolution experiment that the intermetallic corrosion resistance is at minimum 7 times greater than of the zinc, further on this result, the potentiodynamic polarization experiment shows that the passive intermetallic layer slows the oxidation velocity, which means, the galvanic coating (GI) corrosion resistance is increased.
Chen, Chen-Tsao, and 陳貞造. "Study on Processing Parameters of Yellow Zinc Galvanizing Process by Trivalent Chromium." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/nkfzy6.
國立彰化師範大學
電機工程學系
105
Galvanized parts as the underlying corrosion treatment have better anti-corrosion effect. Also, the anti-corrosion ability can be enhanced if the film formation process is subjected to electrical galvanized surface. Film formation process of the present technology is divided into hexavalent and trivalent chromium, hexavalent chromium is toxic and will cause harm to humans and the environment, and trivalent chromium is not only non-toxic and harmless to human body, is also easier to handle wastewater, not a burden on the environment. So trivalent chromium chemical conversion coating film is the mainstream of future development. Trivalent chromium chemical conversion coating film can be classified into blue zinc, multicolored, and black zinc coating, the present study was to investigate the trivalent chromium chemical conversion coating film in a colorful coating. The study includes the temperature of the reaction process, P/H value, and the corrosive nature of the completion of the plating color. Then through the key parameters in the analysis of experimental data to optimize the process to achieve low cost, good quality, high efficiency, and high yield results. In this study, the experimental results show that the process of trivalent chromium galvanizing in the P/H value of 2.2, the temperature value of 40 ℃ and the concentration of 8 % in plating environment, have superior quality that the others. In the future, trivalent chromium chemical conversion coating film will gradually replace hexavalent chromium. Because of its non-toxic, easy to handle wastewater, and meet the regulations and requirements of green production line with modern environmental.
Books on the topic "Galvanizing process":
Hornsby, J. M. Hot-dip galvanizing: Guide to process selection and galvanizing practice. London: Intermediate Technology Publications, 1994.
Bennett, Caroline, Jian Li, and Adolfo Matamoros. Mitigation of Weldment Cracking in Steel Highway Structures Due to the Galvanizing Process. Washington, D.C.: Transportation Research Board, 2021. http://dx.doi.org/10.17226/26223.
Kopyciński, Dariusz. Krystalizacja faz międzymetalicznych i cynku na żelazie oraz na jego nisko- i wysokowęglowych stopach podczas procesu cynkowania. Kraków: AGH Uczelniane Wydawnictwa Naukowo-Dydaktyczne, 2006.
Kopyciński, Dariusz. Krystalizacja faz międzymetalicznych i cynku na żelazie oraz na jego nisko- i wysokowęglowych stopach podczas procesu cynkowania. Kraków: AGH Uczelniane Wydawnictwa Naukowo-Dydaktyczne, 2006.
Hornsby, M. J. Hot-Dip Galvanizing: A Guide to Process Selection and Galvanizing Practice. Practical Action, 1995.
Matin, Samiha. Private Femininity, Public Femininity. University of Illinois Press, 2017. http://dx.doi.org/10.5406/illinois/9780252036613.003.0007.
Book chapters on the topic "Galvanizing process":
Kopyciński, Dariusz. "Crystallization of Intermetallic Phases Fe-Zn during Hot-Dip Galvanizing Process." In TMS2013 Supplemental Proceedings, 439–46. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118663547.ch54.
Huber, Frédéric, and Wolfgang Bleck. "Hot-Dip Galvanizing Process Using ZinQuench for Processing Advanced High-Strength Steels." In 18th International Federation for Heat Treatment and Surface Engineering, 423–37. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2011. http://dx.doi.org/10.1520/stp49448t.
Huber, Frédéric, and Wolfgang Bleck. "Hot-Dip Galvanizing Process Using ZinQuench for Processing Advanced High-Strength Steels." In 18th International Federation for Heat Treatment and Surface Engineering, 423–37. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2011. http://dx.doi.org/10.1520/stp153220120030.
Vates, Umesh Kumar, B. P. Sharma, Nand Jee Kanu, Naveen Anand Daniel, Sivaraos Subramanian, and Priyanshu Sharma. "Optimization of Process Parameters of Galvanizing Steel in Resistance Seam Welding Using RSM." In Proceedings of International Conference in Mechanical and Energy Technology, 695–706. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-2647-3_65.
Hussain, Fazal, Saud Alhayli, and Mahmoud Aljurf. "Data Unit, Translational Research, and Registries." In The Comprehensive Cancer Center, 157–65. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-82052-7_16.
Rudnik, Ewa. "Hydrometallurgical Recovery of Zinc from By-Products and Waste Materials of Hot-Dip Galvanizing Process." In The Minerals, Metals & Materials Series, 205–34. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-14685-5_6.
He, Dakuo, Kai Zhang, Da Li, and Qihao Wu. "Research of Process Monitoring and Fault Trace System for Annealing Furnace of Hot-Dip Galvanizing Line." In Proceedings of the 2015 International Conference on Electrical and Information Technologies for Rail Transportation, 279–87. Berlin, Heidelberg: Springer Berlin Heidelberg, 2016. http://dx.doi.org/10.1007/978-3-662-49370-0_29.
Hussain, Fazal, Riad El Fakih, and Mahmoud Aljurf. "Data Management." In Quality Management and Accreditation in Hematopoietic Stem Cell Transplantation and Cellular Therapy, 137–46. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-64492-5_15.
Wesselmecking, Sebastian, Marc Ackermann, Charline Blankart, Jing Wang, Frederike Brasche, Tobias Plum, Siyuan Qin, et al. "Toward Holistic Digital Material Description During Press-Hardening." In Internet of Production, 1–16. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-030-98062-7_22-1.
Wesselmecking, Sebastian, Marc Ackermann, Charline Blankart, Jing Wang, Frederike Brasche, Tobias Plum, Siyuan Qin, et al. "Toward Holistic Digital Material Description During Press-Hardening." In Internet of Production, 171–86. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-44497-5_22.
Conference papers on the topic "Galvanizing process":
Liu, D., and M. Stroia. "Continuous Galvanizing Process for Long Steel Products." In AISTech 2020. AIST, 2020. http://dx.doi.org/10.33313/380/137.
Morganti, Francisco, Fritz Brühl, and Caesar Sasse. "INFLUENCES OF MODERN AHSS-GRADES ON THE PICKLING, ANNEALING AND GALVANIZING PROCESS." In 54º Seminário de Laminação e Conformação. São Paulo: Editora Blucher, 2017. http://dx.doi.org/10.5151/1983-4764-30151.
Huang, F., Y. Chen, F. Fang, X. F. Du, F. Y. Sun, L. B. Pan, and F. Huang. "Selective Oxidation Behaviors of a DP780 Steel during Hot-Dip Galvanizing Process." In The 2nd International Conference on Advanced High Strength Steel and Press Hardening (ICHSU 2015). WORLD SCIENTIFIC, 2016. http://dx.doi.org/10.1142/9789813140622_0039.
Ibrahim, Abdulwahab, and Scott MacIntyre. "Galvanized Steel as a Sustainable Material-Technology and Failure Analysis." In The 2nd International Conference on Civil Infrastructure and Construction. Qatar University Press, 2023. http://dx.doi.org/10.29117/cic.2023.0102.
Zhang, Hongmei, Heran Li, Yujing Fu, and Lianjie Li. "Simulation Analysis of Different Thickness Control in the Continuous Hot-dip Galvanizing Process." In 2015 6th International Conference on Manufacturing Science and Engineering. Paris, France: Atlantis Press, 2015. http://dx.doi.org/10.2991/icmse-15.2015.235.
Fan, Song, Min Zhang Li, and Jia Wang. "Independent component analysis with application to hot galvanizing pickling waste liquor treatment process." In 2017 36th Chinese Control Conference (CCC). IEEE, 2017. http://dx.doi.org/10.23919/chicc.2017.8028466.
Bobzin, K., T. Schläfer, T. Warda, and C. Schulz. "Thermal Spraying of Advanced Zinc Alloys as an Addition to Hot-Dip Galvanizing." In ITSC2011, edited by B. R. Marple, A. Agarwal, M. M. Hyland, Y. C. Lau, C. J. Li, R. S. Lima, and A. McDonald. DVS Media GmbH, 2011. http://dx.doi.org/10.31399/asm.cp.itsc2011p0840.
Mcdermid, J. R., S. Dionne, O. Dremailova, B. Voyzelle, E. Essadiqi, E. Baril, and F. E. Goodwin. "The Effect of Continuous Galvanizing Process Parameters on the User Properties of Hot-Rolled Transformation Induced Plasticity Steels." In SAE 2005 World Congress & Exhibition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2005. http://dx.doi.org/10.4271/2005-01-0495.
Yoon, Hyun Gi, Gi Jang Ahn, Myung Kyoon Chung, and Jong Keun Kim. "Aerodynamic Investigation of Air Knife System to Find Out the Mechanism of the Check Mark in a Continuous Hot-Dip Galvanizing Process." In ASME 2008 International Mechanical Engineering Congress and Exposition. ASMEDC, 2008. http://dx.doi.org/10.1115/imece2008-68056.
Oktavina, Rakhma. "Optimizing The Hot-dip Galvanizing Process Of Angle Bar Steel Product According To ISO 1461 Standard Using The Taguchi Method." In 13th Annual International International Conference on Industrial Engineering and Operations Management. Michigan, USA: IEOM Society International, 2023. http://dx.doi.org/10.46254/an13.20230200.
Reports on the topic "Galvanizing process":
Energy-efficient process for hot-dip batch galvanizing. Office of Scientific and Technical Information (OSTI), April 1998. http://dx.doi.org/10.2172/594463.