Relevant bibliographies by topics / Foam

Academic literature on the topic 'Foam'

Author: Grafiati
Published: 4 June 2021
Last updated: 20 July 2024

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Foam.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Foam"

1

ABDULKADIR, H. K., E. J. EKEFAN, and V. I. Gwa. "ANTAGONISTIC POTENTIAL OF Trichoderma harzianum AGAINST F. oxysporum f. sp. lycopersici ISOLATES CAUSING FUSARIUM WILT DISEASE OF TOMATO (Solanum lycopersicum L.)." FUDMA Journal of Agriculture and Agricultural Technology 9, no. 1 (May 17, 2023): 143–49. http://dx.doi.org/10.33003/jaat.2023.0901.19.

Full text
Abstract:
Antagonistic effect of T. harzianum was carried out on F. oxysporum f. sp. lycopersici. isolates of tomato variety (UC 82B) in a screen house located at the Teaching and Research Farm of Federal University of Agriculture, Makurdi during 2015 cropping season to determine the ability of the antagonistic in controlling Fusarium wilt diseases of tomato. The F. oxysporum isolates tested were coded as: FoAs1, FoAs2, FoAg, FoNb, FoSb, FoAm, FoAk, FoOr, FoAd and FoUAM together with an uninoculated control. The experiment was a 2 x 11 factorial laid out in Completely Randomized Design (CRD) and replicated three times. T. harzianum was introduced at three different times (Two days before, same time and two days after the inoculation of F. oxysporum). In vitro tests results revealed antagonistic effects of T. harzianum on F. oxysporum isolates. Growth inhibition was significantly higher (P≤0.05) when T. harzianum was introduced two days before inoculation of F. oxysporum. Interaction shows that T. harzianum introduced two days before inoculation of F. oxysporum gave better inhibition of all the Fusarium isolates tested except isolates FoAd and FoAg compared with when the antagonist was introduced at the same time and when it was introduced two days after inoculation of F. oxysporum. Also, T. harzianum (P≤0.05) totally inhibited the growth of isolates FoAg, FoAs1, FoNb, FoOr and FoUAM but not those of FoAd, FoAk, FoAm, FoAs2 and FoSb. It is therefore recommended that T. harzianum be used in the management of fusarium wilt disease of tomato
APA, Harvard, Vancouver, ISO, and other styles
2

Busahmin, Bashir, Brij Maini, Rama Rao Karri, and Maziyar Sabet. "Studies on the Stability of the Foamy Oil in Developing Heavy Oil Reservoirs." Defect and Diffusion Forum 371 (February 2017): 111–16. http://dx.doi.org/10.4028/www.scientific.net/ddf.371.111.

Full text
Abstract:
In the process of natural energy depletion, foamy oil is characterized of low production Gas Oil Ratio, high oil viscosity, high daily production rate and high primary recovery factor. The stability of the foam turns out to be the prevailing factor that governs the life of the ‘foamy oil’. To enumerate the main factors affecting the stability of the foam, a high-temperature–high-pressure visualized experiment model for foamy oil stability test was developed. A serial of experiments was conducted to evaluate the performance of the foam stability. The effects of oil viscosity, height of the oil column, dissolved gas content and dispersed gas were investigated and recorded. These experiments were conducted using a Hele-Shaw, a high pressure cell. The volume of foamy oil produced, either by a step reduction in pressure or by a gradual (linear) reduction in pressure, and its subsequent decay was observed, visually. The experimental results show that foamy oil stability increases with higher oil viscosity, higher oil column, higher dissolved gas content and higher pressure decline rate. Asphaltene content was not observed to increase the foamy oil stability significantly. The results also show that the foam quality of foamy oils is much lower than aqueous foams.
APA, Harvard, Vancouver, ISO, and other styles
3

M. Al-Qararah, Ahmad. "Exploring Foam Drainage in Fiber-Foam: A Review." Applied Physics Research 15, no. 2 (September 14, 2023): 98. http://dx.doi.org/10.5539/apr.v15n2p98.

Full text
Abstract:
The foam drainage is extremely important in many situations where fiber foams are used. Enhancing wet foam stability requires a complete understanding of the mechanisms and factors affecting wet foam drainage. Investigation of the drainage behavior of fiber foams has been studied in this review. The mechanics behind fiber foam drainage are discussed in detail, along with the influence of surfactant concentration, fiber consistency, and other variables. It also investigated adding additives, such as chemi-thermo-mechanical pulp (CTMP), affects foam drainage. Highlighting the most recent developments in experimental and theoretical methods for describing and forecasting foam drainage behavior are presented. This review acts as a reference to offer useful understanding of the essential factors of foam drainage in fiber foams solution.
APA, Harvard, Vancouver, ISO, and other styles
4

Lo, King Him, Akira Miyase, and Su S. Wang. "Stiffness predictions for closed-cell PVC foams." Journal of Composite Materials 51, no. 23 (December 6, 2016): 3327–36. http://dx.doi.org/10.1177/0021998316683025.

Full text
Abstract:
Light-weight polymeric foams are frequently used in composite sandwich construction in which foam core material properties could significantly influence the overall performance of the sandwich structure. Foam mechanical properties usually depend on a number of factors, including foam density, cell microstructure, and properties of foam–matrix polymer. Although the properties of foam–matrix polymer are determined mainly by the properties of the foam base (parent) polymer, they are also affected by other factors such as foam processing conditions. With the large number of material and microstructure parameters that influence foam properties, modeling mechanical behavior of polymeric foams could be quite involved, especially if foam behavior is anisotropic. This paper describes an effort to predict static elastic stiffness of closed-cell PVC foams. PVC foams are modeled as transversely isotropic materials with properties in the foam rise direction different from those in the planar (plane of isotropy) directions. An engineering approach, based on fibrous composites, is developed to predict in-plane and out-of-plane stiffness of PVC foams. The validity of the engineering model for the PVC foam stiffness is first demonstrated through comparison with test results on DIAB H80 foam obtained from a systematic in-house test program. Comparison of the predictions with the stiffness properties reported by a PVC foam manufacturer for various other density foams is also carried out. Good agreements are obtained for the cases studied. Comparison of stiffness predictions obtained in the paper with predictions from other published models of isotropic foam behavior is presented.
APA, Harvard, Vancouver, ISO, and other styles
5

Obisesan, Oyindamola, Ramadan Ahmed, and Mahmood Amani. "The Effect of Salt on Stability of Aqueous Foams." Energies 14, no. 2 (January 6, 2021): 279. http://dx.doi.org/10.3390/en14020279.

Full text
Abstract:
The properties of foams are often affected by environmental variables such as salt contamination. The objective of this study is to investigate the impact of salt on the drainage behavior of aqueous foams. To accomplish this objective, drainage experiments were conducted on aqueous foams. Test variables were foam quality (40–65%), and salt content (0% to 18%), and type. To investigate drainage, the foam was generated in a flow loop and trapped in a vertical test section. Then, the pressure profile in the foam column was measured using ten pressure sensors. Foam drainage is determined as a function of time using measured pressure profiles. The results show that the drainage of NaCl-containing foams decreased with foam quality, whereas the CaCl2-containing foams did not exhibit a clear trend with foam quality. The effect of salt content on foam rheology was minimal.
APA, Harvard, Vancouver, ISO, and other styles
6

Zhou, Xia, Zhihao An, Ziheng Liu, Hongjie Ha, Yixuan Li, and Renming Pan. "The Influence of the Heat Transfer Mode on the Stability of Foam Extinguishing Agents." Fire 7, no. 4 (April 12, 2024): 137. http://dx.doi.org/10.3390/fire7040137.

Full text
Abstract:
The mass loss mechanisms of an aqueous film-forming foam (AF foam), an AR/AFFF water-soluble film-forming foam extinguishing agent (AR foam), and a Class A foam extinguishing agent (A foam) at different levels of thermal radiation, thermal convection, and heat conduction intensity were studied. At a relatively low thermal radiation intensity, the liquid separation rate of the AF, AR, and A foams is related to the properties of the foam itself, such as viscosity and surface/interface tension, which are relatively independent of the external radiation heat flux of the foam. At low radiation intensity (15 kW/m2 and 25 kW/m2), the liquid separation rate of the AF and A foams is relatively stable. When the heat flux intensity is 35 kW/m2, the liquid separation rate of the AF and A foams increases notably, which may be mainly due to the rapid decrease in foam viscosity. And the mass loss behavior is dominated by liquid separation in the AF, AR, and A foams under the influence of thermal radiation and thermal convection. Under the same experimental conditions, the liquid separation rate of AF is the fastest. There is no significant difference in the evaporation rates of the three kinds of foam in the same heat conduction condition. In addition, the AR and A foams usually have a 25% longer liquid separation time (t) under thermal radiation and thermal convection, and the thermal stability is better than AF foam. The temperature reached by the AF foam layer under thermal convection was lower than that of the AR and A foams, and the time for the foam layer to reach the highest temperature under heat conduction was longer than that of the AR and A foams.
APA, Harvard, Vancouver, ISO, and other styles
7

HONKANEN, MARKUS, and HANNU ELORANTA. "Advanced real-time digital microscopy of foaming processes." January 2023 22, no. 1 (January 24, 2023): 21–31. http://dx.doi.org/10.32964/tj22.1.21.

Full text
Abstract:
The properties of aqueous foams play a major role in foam forming and foam coating. Inline real-time foam measurements provide highly desired opportunities for optimization and control of foaming processes. This paper presents inline digital microscopy measurements of aqueous foams in foaming processes. It presents methods for providing detailed information on foam quality parameters, such as foam density and foam homogeneity in real time from the process. In addition, this study evaluates the performance of transillumination and front-light illumination in imaging of foams. The tests show very good results for the transillumination approach. Limitations of the image-based optical technique are discussed, and the precision of bubble size distribution measurement is assessed with a certificated reference substance. The measured foam densities are compared against the reference foam densities in the range 100–300 g/L, providing a linear correlation with R2 value of 0.99. In the case of heterogenous foams with a wide bubble size distribution, the bubble size-dependent dimensionless depth of field must be taken into account to obtain accurate estimates of foam density. Bubble-scale foam homogeneity is described by the standard deviation of bubble size distribution in foam.
APA, Harvard, Vancouver, ISO, and other styles
8

Babcsán, N., F. Garcia-Moreno, D. Leitlmeier, and John Banhart. "Liquid-Metal Foams – Feasible In Situ Experiments under Low Gravity." Materials Science Forum 508 (March 2006): 275–80. http://dx.doi.org/10.4028/www.scientific.net/msf.508.275.

Full text
Abstract:
Metal foams are quite a challenge to materials scientists due to their difficult manufacturing. In all processes the foam develops in the liquid or semiliquid state. Liquid-metal foams are complex fluids which contain liquid metals, solid particles and gas bubbles at the same time. An X-ray transparent furnace was developed to monitor liquid metal foam evolution. Aluminium foams - similar to the commercial Metcomb foams - were produced by feeding argon or air gas bubbles into an aluminium composite melt. The foam evolution was observed in-situ by X-ray radioscopy under normal gravity. Drainage and rupture were evaluated during the 5 min foam decay and 2 min solidification. Argon blown foams showed significant drainage and cell wall rupture during the first 20 s of foam decay. Air blown foams were stable and neither drainage nor rupture occurred. We demonstrated the feasibility of experiments during parabolic flight or drop tower campaigns. However, the development of a foam generator for low gravity is needed.
APA, Harvard, Vancouver, ISO, and other styles
9

Lee, W., S. Lee, M. Izadi, and S. I. Kam. "Dimensionality-Dependent Foam Rheological Properties: How To Go From Linear to Radial Geometry for Foam Modeling and Simulation." SPE Journal 21, no. 05 (April 22, 2016): 1669–87. http://dx.doi.org/10.2118/175015-pa.

Full text
Abstract:
Summary Numerous laboratory and field tests reveal that foam can effectively control gas mobility and improve sweep efficiency, if correctly designed. It is believed that there is a significant gap between small laboratory-scale experiments and large field-scale tests because of two main reasons: (1) Typical laboratory flow tests are conducted in linear systems, whereas field-scale foam enhanced-oil-recovery (EOR) processes are performed in radial (or spherical partly) systems and (2) through the complicated in-situ lamella creation/coalescence mechanisms and non-Newtonian behavior, foam rheology depends on the geometry and dimensionality. As a result, it is still an open question as to how to translate laboratory-measured data to field-scale treatments. Motivated by earlier studies of Kovscek et al. (1994, 1997), this study investigates how such dimensionality-dependent foam rheological properties are affected by different injection conditions on small and large scales, with a mechanistic foam-modeling technique. Complex foam-flow characteristics such as three foam states (weak-foam, strong-foam, and intermediate states) and two steady-state strong-foam regimes (high-quality regime and low-quality regime) lie in the heart of this analysis. The calculation results from small radial and spherical systems showed that (1) for strong foams in the low-quality regime injected, foam mobility decreased [or mobility reduction factor (MRF) increased] significantly with distance showing a good sweep efficiency; (2) for strong foams in the high-quality regime, the situation became more complicated—near the well, foam mobility decreased, but away from the well, foam mobility increased with distance, which eventually gave a relatively low sweep efficiency; and (3) for weak foams injected, foam mobility increased with distance showing a poor sweep efficiency. The results implied that the use of a fixed value of MRF, which is a common practice in field-scale reservoir simulations, might lead to a significant error. When the method was applied to a larger scale, it was shown that strong foams could propagate deeper into the reservoir at higher injection rate, higher injection pressure, and at lower injection foam quality. Foam-propagation distance was very sensitive to these injection conditions for strong foams in the high-quality regime, but much less sensitive for strong foams in the low-quality regime.
APA, Harvard, Vancouver, ISO, and other styles
10

Amir, N., Mohamed Syakir Mohamed Hisham, and Kamal Ariff Zainal Abidin. "Study of Physical Properties and Shock Absorption Abilities of Starch Polymer Foam as Cushioning Material for Packaging." MATEC Web of Conferences 225 (2018): 06010. http://dx.doi.org/10.1051/matecconf/201822506010.

Full text
Abstract:
Lack of information about the formulation and fabrication process of starch polymer foam and lack of study in the shock absorption ability of starch polymer foam were the reasons this research was executed. In this project starch polymer foam was produced to be used as cushioning material for packaging. Starch polymer foam were developed from starch, polyvinyl alcohol (PVA), urea, citric acid, and deionised water. Water amount with drying and curing process were the variables manipulated to produce the best starch polymer foam. It was determined then, that the optimized ratio of starch:PVA:citric acid was 1:1:4. The amount of water used was 10 ml/gram of starch/PVA weight. The suitable foaming mixing was done at a speed of 1500 rpm for 40 minutes. Drying process was done at 70°C for 24 hours, followed by curing process at 100°C for 1 hour to produce closed-cell foam. While for the open-cell foam, the foam was dried and cured at 100ºC for 6 hours. The open-cell and closed-cell foams produced were cut to 6 cm height x 6 cm width x 0.5 cm thick. The average density was calculated and then the foams were subjected to weight drop destructive test. The test was done by placing a foam on top of a piece of mirror, and a weight is dropped onto the foam, with increasing height until the mirror break. Three weights were used with mass of 50 g, 100 g and 200 g. The starch foams were compared to polyurethane and polystyrene foams in terms of the minimum height that can cause the mirror to break. The results showed that starch closed-cell foam absorbed the highest impact energy followed by polystyrene foam, starch open-cell foam and polyurethane foam.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Foam"

1

Braz, Dulce Alexandra. "Particle-stabilised foams and foam films." Thesis, University of Hull, 2009. http://hydra.hull.ac.uk/resources/hull:2185.

Full text
Abstract:
This thesis aimed to investigate and understand the properties of foams and foam liquid films stabilised by colloidal solid particles, in the absence of any surface active substances, e.g. surfactants. Foams occur as end products or during the processing of products in many industries, including detergents, food and the cosmetic industries. A controlled level of foam formation is desirable in many consumer products. Therefore understanding the mechanisms for their control was also important in this research. Colloidal particles act in many ways like traditional surfactant molecules but offer distinct advantages. The main advantage is that particle-stabilised foams offer longer stability in comparison to surfactant-stabilised foams. Most of the studies, however, were focused on mixtures of surfactant systems and solid particles. Physical mechanisms for foam formation in the presence of colloidal particles alone are less known. However, in response to an increasing interest for this subject, a number of research papers on foams stabilised by solid particles alone have been published recently and during the past 5 years.
APA, Harvard, Vancouver, ISO, and other styles
2

Bhattacharjee, Samita. "Prediction Of Separation Factor In Foam Separation Of Proteins." Thesis, Indian Institute of Science, 1994. https://etd.iisc.ac.in/handle/2005/132.

Full text
Abstract:
Polyhedral foams offer large gas-liquid interfacial area associated with a small amount of liquid. Therefore, if a solute adsorbs preferentially at the interface, the concentration of the solute in the foam will be greater than in the solution from which the foam has been generated. This effect provides a simple method of concentrating materials which have a tendency to adsorb on the gas-liquid interface. This is particularly relevant to biomaterials like whole cells, proteins, enzymes etc., which are surface active and are present in low concentrations in the broth. Foam separation has therefore attracted considerable attention, and several reports exist in literature on concentrating cells, proteins and enzymes using foams. Foam separation is based on the difference in surface activity of the components to be separated. A surface active molecule consists of a lyophobic and a lyophilic group. (As water is commonly used as a solvent, the lyophilic and lyophobic groups are called hydrophilic and hydrophobic groups, respectively). When dissolved in a solvent, the presence of lyophobic groups in the interior of the solvent distorts the solvent liquid structure, thereby increasing the free energy of the system.
APA, Harvard, Vancouver, ISO, and other styles
3

Bhattacharjee, Samita. "Prediction Of Separation Factor In Foam Separation Of Proteins." Thesis, Indian Institute of Science, 1994. http://hdl.handle.net/2005/132.

Full text
Abstract:
Polyhedral foams offer large gas-liquid interfacial area associated with a small amount of liquid. Therefore, if a solute adsorbs preferentially at the interface, the concentration of the solute in the foam will be greater than in the solution from which the foam has been generated. This effect provides a simple method of concentrating materials which have a tendency to adsorb on the gas-liquid interface. This is particularly relevant to biomaterials like whole cells, proteins, enzymes etc., which are surface active and are present in low concentrations in the broth. Foam separation has therefore attracted considerable attention, and several reports exist in literature on concentrating cells, proteins and enzymes using foams. Foam separation is based on the difference in surface activity of the components to be separated. A surface active molecule consists of a lyophobic and a lyophilic group. (As water is commonly used as a solvent, the lyophilic and lyophobic groups are called hydrophilic and hydrophobic groups, respectively). When dissolved in a solvent, the presence of lyophobic groups in the interior of the solvent distorts the solvent liquid structure, thereby increasing the free energy of the system.
APA, Harvard, Vancouver, ISO, and other styles
4

Verdugo, Rodriguez Rogelio Alberto. "Carbon foam characterization tensile evaluation of carbon foam ligaments." Texas A&M University, 2003. http://hdl.handle.net/1969.1/56.

Full text
Abstract:
A methodology for ligament isolation and specimen preparation for tensile testing of single ligaments from the unit cell of open-cell carbon foams has been successfully developed and implemented. Results are presented for ligaments of three different carbon foam designations. Two of them are reticulated vitreous carbon (RVC) foams of 20 and 45 pores-per- inch (ppi) coated with SiC by chemical vapor deposition (CVD) and the other is a RVC 20 ppi foam without coating. Scanning electron microscopy and digital imaging analysis is used to analyze the fracture surfaces posts tests. The ultimate strength of each ligament evaluated. Weibull statistics is used to describe the strength distribution of ligaments. While the distribution of strengths of the carbon foam ligaments (RVC) could be described with a one-population distribution, it is found that a two-population Weibull distribution is necessary to describe the distribution of strength of the SiC coated ligaments.
APA, Harvard, Vancouver, ISO, and other styles
5

Keltner, Noelle Joy. "Study of PocoFoam (TM) as a heat exchanger element in cryogenic applications." Thesis, Georgia Institute of Technology, 2014. http://hdl.handle.net/1853/51774.

Full text
Abstract:
Superconductors present great potential for weight reduction and increased power delivery when compared to traditional copper power delivery systems, but current systems require cryogenic cooling systems. Traditional superconductor cooling systems consist of helium cooled by helical heat exchangers made of Oxygen Free High thermal Conductivity (OFHC) copper tube. The helium is cooled by bulky heat exchangers consisting of OFHC copper coils wrapped around a cryogenic cooler heat sink for heat transfer into the working fluid. Metal foams have recently been studied in a variety of heat transfer applications, and could greatly reduce the weight of heat exchanger modules in superconductor cooling systems while simultaneously providing increased heat transfer effectiveness. Aluminum and Copper foams have been available for several years, but more recently, graphite foams, such as PocoFoam™, have been developed which have particularly good heat transfer characteristics. Using Computational Fluid Dynamics (CFD) to model a cryogenic heat exchanger application, this study examines the effectiveness and pressure drop of several metal foam heat exchangers, and compares their performance with the traditional helical coil design for superconductor cooling applications. The CFD simulation results show that a heat exchanger with the same heat sink contact area as existing helical heat exchangers weighs up to 95 percent less and can be up to 25 percent more effective, depending on system conditions such as pressure, cryogenic cooler temperature and helium inlet temperature. Aluminum and copper foam heat exchangers had comparable weight to the PocoFoam heat exchanger, but were significantly less effective than the helical or PocoFoam heat exchanger models.
APA, Harvard, Vancouver, ISO, and other styles
6

Yüksel, Sinan Güden Mustafa. "Crushing behaviour of aluminum foam-filled composite tubes/." s.l.]: [s.n.], 2005. http://library.iyte.edu.tr/tezler/master/makinamuh/T000380.pdf.

Full text
Abstract:
Thesis (Master)--İzmir Institute of Technology, İzmir, 2005.
Keywords:crushing, aluminum foam, foam filling, energy absorber, composite tubes. Includes bibliographical references (leaves. 93-96).
APA, Harvard, Vancouver, ISO, and other styles
7

Blandin, Christopher. "Production of dielectric materials." Thesis, Atlanta, Ga. : Georgia Institute of Technology, 2008. http://hdl.handle.net/1853/26568.

Full text
Abstract:
Thesis (M. S.)--Mechanical Engineering, Georgia Institute of Technology, 2009.
Committee Chair: Colton, Jonathan; Committee Member: Schultz, John; Committee Member: Zhou, Min. Part of the SMARTech Electronic Thesis and Dissertation Collection.
APA, Harvard, Vancouver, ISO, and other styles
8

Paknejad, Amir Saman. "Foam drilling simulator." Texas A&M University, 2005. http://hdl.handle.net/1969.1/4792.

Full text
Abstract:
Although the use of compressible drilling fluids is experiencing growth, the flow behavior and stability properties of drilling foams are more complicated than those of conventional fluids. In contrast with conventional mud, the physical properties of foam change along the wellbore. Foam physical and thermal properties are strongly affected by pressure and temperature. Many problems associated with field applications still exist, and a precise characterization of the rheological properties of these complex systems needs to be performed. The accurate determination of the foam properties in circulating wells helps to achieve better estimation of foam rheology and pressure. A computer code is developed to process the data and closely simulate the pressure during drilling a well. The model also offers a detailed discussion of many aspects of foam drilling operations and enables the user to generate many comparative graphs and tables. The effects of some important parameters such as: back-pressure, rate of penetration, cuttings concentration, cuttings size, and formation water influx on pressure, injection rate, and velocity are presented in tabular and graphical form. A discretized heat transfer model is formulated with an energy balance on a control volume in the flowing fluid. The finite difference model (FDM) is used to write the governing heat transfer equations in discretized form. A detailed discussion on the determination of heat transfer coefficients and the solution approach is presented. Additional research is required to analyze the foam heat transfer coefficient and thermal conductivity.
APA, Harvard, Vancouver, ISO, and other styles
9

Everington, Ashley Steven. "Foam diagram summation." Thesis, University of Cambridge, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.620047.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Cheng, Liang. "Modeling and simulation studies of foam processes in improved oil recovery and acid-diversions." Access restricted to users with UT Austin EID Full text (PDF) from UMI/Dissertation Abstracts International, 2002. http://wwwlib.umi.com/cr/utexas/fullcit?p3077619.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Foam"

1

Ekserova, D. R. Foam and foam films: Theory, experiment, application. Amsterdam: Elsevier, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Stevenson, Paul, ed. Foam Engineering. Chichester, UK: John Wiley & Sons, Ltd, 2012. http://dx.doi.org/10.1002/9781119954620.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Osis, Vicki. Sea foam. [Corvallis, Or.]: Oregon Sea Grant, Oregon State University, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Daniel, Klempner, Sendijareviʹc Vahid, and Aseeva R. M, eds. Handbook of polymeric foams and foam technology. 2nd ed. Munich: Hanser Publishers, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Daniel, Klempner, and Frisch Kurt Charles 1918-, eds. Handbook of polymeric foams and foam technology. Munich: Hanser, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

illustrator, Wolcott Karen, ed. Fabulous fun foam! New York: Sterling Innovation, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Morris, Skip. Tying foam flies. Portland, Or: F. Amato, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Bermudez-Onopa, R. David. The FOAM ship. Hato Rey, P.R: Publicaciones Puertorriqueñas, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Allison, Drew. The foam book. Charlotte, N.C: Grey Seal Press, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Woodworth, Steven P. Fighting fires with foam. New York: Van Nostrand Reinhold, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Foam"

1

Cornick, Marc. "Foam." In Phenolic Resins: A Century of Progress, 189–208. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-04714-5_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Tadros, Tharwat. "Foam." In Encyclopedia of Colloid and Interface Science, 524–25. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-20665-8_90.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Gooch, Jan W. "Foam." In Encyclopedic Dictionary of Polymers, 320. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_5193.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Li, Xueliang, and Paul Stevenson. "Foam Fractionation." In Foam Engineering, 307–30. Chichester, UK: John Wiley & Sons, Ltd, 2012. http://dx.doi.org/10.1002/9781119954620.ch14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Weaire, Denis, Steven T. Tobin, Aaron J. Meagher, and Stefan Hutzler. "Foam Morphology." In Foam Engineering, 5–26. Chichester, UK: John Wiley & Sons, Ltd, 2012. http://dx.doi.org/10.1002/9781119954620.ch2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Koehler, Stephan A. "Foam Drainage." In Foam Engineering, 27–58. Chichester, UK: John Wiley & Sons, Ltd, 2012. http://dx.doi.org/10.1002/9781119954620.ch3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Pitois, Olivier. "Foam Ripening." In Foam Engineering, 59–73. Chichester, UK: John Wiley & Sons, Ltd, 2012. http://dx.doi.org/10.1002/9781119954620.ch4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Denkov, Nikolai D., Slavka S. Tcholakova, Reinhard Höhler, and Sylvie Cohen-Addad. "Foam Rheology." In Foam Engineering, 91–120. Chichester, UK: John Wiley & Sons, Ltd, 2012. http://dx.doi.org/10.1002/9781119954620.ch6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Stevenson, Paul, and Xueliang Li. "Pneumatic Foam." In Foam Engineering, 145–67. Chichester, UK: John Wiley & Sons, Ltd, 2012. http://dx.doi.org/10.1002/9781119954620.ch8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Stevenson, Paul. "Introduction." In Foam Engineering, 1–4. Chichester, UK: John Wiley & Sons, Ltd, 2012. http://dx.doi.org/10.1002/9781119954620.ch1.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Foam"

1

Durian, Douglas, and Gregory Zimmerli. "Foam Optics and Mechanics (FOAM)." In 2001 Conference and Exhibit on International Space Station Utilization. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2001. http://dx.doi.org/10.2514/6.2001-4961.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Tobis, Michael, Chad Schafer, Ian Foster, Robert Jacob, and John Anderson. "FOAM." In the 1997 ACM/IEEE conference. New York, New York, USA: ACM Press, 1997. http://dx.doi.org/10.1145/509593.509620.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Liaposhchenko, А., О. Khukhryanskiy, V. Moiseev, and Е. Manoilo. "Foam layered apparatus with foam stabilization." In Chemical technology and engineering. Lviv Polytechnic National University, 2019. http://dx.doi.org/10.23939/cte2019.01.072.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

NG, Y. JACK. "QUANTUM FOAM." In Proceedings of the MG10 Meeting held at Brazilian Center for Research in Physics (CBPF). World Scientific Publishing Company, 2006. http://dx.doi.org/10.1142/9789812704030_0286.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Khajehpour, Maryam, S. Reza Etminan, Jon Goldman, Fred Wassmuth, and Steven Bryant. "Nanoparticles as Foam Stabilizer for Steam-Foam Process." In SPE EOR Conference at Oil and Gas West Asia. Society of Petroleum Engineers, 2016. http://dx.doi.org/10.2118/179826-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Yu, Jianjia, Cheng An, Di Mo, Ning Liu, and Robert L. Lee. "Foam Mobility Control for Nanoparticle-Stabilized Supercritical CO2 Foam." In SPE Improved Oil Recovery Symposium. Society of Petroleum Engineers, 2012. http://dx.doi.org/10.2118/153336-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Meng, Yingfeng, Liping Wan, Long Yang, and Jing Wang. "Discussion of Foam Corrosion Inhibition in Air Foam Drilling." In SPE International Symposium on Oilfield Corrosion. Society of Petroleum Engineers, 2005. http://dx.doi.org/10.2118/94469-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Karnakov, Petr, Sergey Litvinov, Jean M. Favre, and Petros Koumoutsakos. "Video: Breaking waves: to foam or not to foam?" In 72th Annual Meeting of the APS Division of Fluid Dynamics. American Physical Society, 2019. http://dx.doi.org/10.1103/aps.dfd.2019.gfm.v0018.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Rossen, William Richard, and Christian S. Boeije. "Fitting Foam Simulation Model Parameters for SAG Foam Applications." In SPE Enhanced Oil Recovery Conference. Society of Petroleum Engineers, 2013. http://dx.doi.org/10.2118/165282-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Cheng, L., A. B. Reme, D. Shan, D. A. Coombe, and W. R. Rossen. "Simulating Foam Processes at High and Low Foam Qualities." In SPE/DOE Improved Oil Recovery Symposium. Society of Petroleum Engineers, 2000. http://dx.doi.org/10.2118/59287-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Foam"

1

Neilsen, Michael K., Wei-Yang Lu, Brian T. Werner, William M. Scherzinger, and Chi S. Lo. Flexible Foam Model. Office of Scientific and Technical Information (OSTI), March 2018. http://dx.doi.org/10.2172/1426546.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Moffat, Harry K., David R. Noble, Thomas A. Baer, Douglas Brian Adolf, Rekha Ranjana Rao, and Lisa Ann Mondy. Foam process models. Office of Scientific and Technical Information (OSTI), September 2008. http://dx.doi.org/10.2172/942055.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

KIDD, JUSTIN, and JENNIFER WOHLWEND. RADIATION HARDENED FOAM COLD TEST PLAN - PHASE II: FOAM CHARACTERIZATION TESTING AND ENVIRONMENTAL CHAMBER TESTING OF FOAMBAG FIXATIVE FOAM. Office of Scientific and Technical Information (OSTI), March 2023. http://dx.doi.org/10.2172/1962582.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Chambers, K. T., and C. J. Radke. Micromodel foam flow study. Office of Scientific and Technical Information (OSTI), October 1990. http://dx.doi.org/10.2172/6499074.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Rossiter, Walter J. Urea-formaldehyde foam insulations :. Gaithersburg, MD: National Bureau of Standards, 1985. http://dx.doi.org/10.6028/nbs.tn.1210.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Murphy, Andrew, Andrew Murphy, Michael Stender, and Matthew Kury. Foam Recession Deficiency Study. Office of Scientific and Technical Information (OSTI), October 2022. http://dx.doi.org/10.2172/1898279.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

MacFarlane, J. J., M. S. Derzon, T. J. Nash, G. A. Chandler, and D. L. Peterson. On the transparency of foam in low-density foam Z-pinch experiments. Office of Scientific and Technical Information (OSTI), December 1998. http://dx.doi.org/10.2172/307955.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Fletcher, Thomas H., Kyle Richard Thompson, Kenneth L. Erickson, Kevin J. Dowding, Daniel Clayton, Tze Yao Chu, Michael L. Hobbs, and Theodore Thaddeus III Borek. CPUF - a chemical-structure-based polyurethane foam decomposition and foam response model. Office of Scientific and Technical Information (OSTI), July 2003. http://dx.doi.org/10.2172/917122.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Charles E. Bates, Harry E. Littleton, Don Askeland, Taras Molibog, Jason Hopper, and Ben Vatankhah. Advanced Lost Foam Casting Technology. Office of Scientific and Technical Information (OSTI), November 2000. http://dx.doi.org/10.2172/790580.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Overturf, G., B. Reibold, B. Cook, and D. Schroen-Carey. Foam shell project: Progress report. Office of Scientific and Technical Information (OSTI), March 1994. http://dx.doi.org/10.2172/10150267.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Foam' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography