Relevant bibliographies by topics / Finite sections

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Finite sections'

Author: Grafiati
Published: 28 September 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Finite sections.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Finite sections"

1

Li, Hai Feng, Yue Li, and Bo Yang. "Calculation of Internal Force on Arbitrary Cross Section Based on Direct Force Method with Finite Element." Advanced Materials Research 1065-1069 (December 2014): 2053–57. http://dx.doi.org/10.4028/www.scientific.net/amr.1065-1069.2053.

Full text
Abstract:
Direct force method based on finite element for the calculation of the internal force of cross section has the advantages of high accuracy and stability. However, the method can only be applied to the sections with element boundary surface, which limits the application scope of the method. Given the advantages of direct force method based on finite element in calculating the internal force of cross section, a new approach for calculating internal force of cross sections in any location is proposed in this study. In this approach, the inverse isoparametric mapping and the direct force method based on finite element are combined together to solve the internal force of cross section at any location in a finite element model.
APA, Harvard, Vancouver, ISO, and other styles
2

Xu, Mingyao. "The power structure of finite p-groups." Bulletin of the Australian Mathematical Society 36, no. 1 (August 1987): 1–10. http://dx.doi.org/10.1017/s0004972700026241.

Full text
Abstract:
In this survey article we give an exposition of some work on the power structure of p-groups; especially work of the author's. The titles of the three sections are: Section 1. p-groups which have regular power structure; Section 2. Some weaker power structure properties; Section 3. p-central series of p-groups.
APA, Harvard, Vancouver, ISO, and other styles
3

Lee, M. M. K., T. Pine, and T. B. Jones. "Automotive box section design under torsion: Part 1: Finite element modelling strategy." Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 214, no. 4 (April 1, 2000): 347–59. http://dx.doi.org/10.1243/0954407001527673.

Full text
Abstract:
Behaviour under torsion is an important performance-related property of automotive box sections. A previous experimental study has identified joining technique, section thickness and section area as the major influencing factors on the torsional behaviour of box hat sections. Using these test results as the basis, a finite element modelling strategy that can simulate the behaviour of adhesively bonded and spot-welded automotive box sections subjected to torsion is presented. The numerical study investigated the effects of material representation, mesh density and layout, and joining technique representation on the stiffness, elastic limit and ultimate strength of the box sections. The final model, calibrated and validated against test results obtained from previous work, was used in an extensive study, presented in the companion paper (Part 2), to further the understanding of the behaviour of torsionally loaded box sections and its implications on weight reduction of automotive structures.
APA, Harvard, Vancouver, ISO, and other styles
4

Boudjelal, M. T., D. Beaulieu, and M. Fafard. "Analyse non linéaire par éléments finis des pièces comprimées et fléchies à parois minces." Canadian Journal of Civil Engineering 21, no. 6 (December 1, 1994): 966–79. http://dx.doi.org/10.1139/l94-102.

Full text
Abstract:
A finite element analysis of the ultimate strength of steel thin-walled beam–columns is discussed in this paper. The numerical model used was developed by Akoussah, Beaulieu, and Dhatt and is based on a Lagrangian formula of thin-walled bars. In this model, the law of multiaxial elastic–plastic behaviour was adopted and incorporated on the section's surface by Radau or Gauss type points. Case studies were performed in which different parameters likely to influence the behaviour of beam–columns were used. Corresponding interaction curves were plotted. The results obtained were compared with those of other authors for H sections under biaxial bending, for square or rectangular tubular sections under biaxial bending, and for H sections bended in relation to each of the principal axes. The results emphasize the key role played by shear stress on the bearing capacity of open section compressed members under bending. Key words: shear, compression, finite elements, bending, interaction, elasticity, plasticity.
APA, Harvard, Vancouver, ISO, and other styles
5

Gourvenec, Susan M., and William Powrie. "Three-dimensional finite element analyses of embedded retaining walls supported by discontinuous earth berms." Canadian Geotechnical Journal 37, no. 5 (October 1, 2000): 1062–77. http://dx.doi.org/10.1139/t00-033.

Full text
Abstract:
A series of three-dimensional finite element analyses has been carried out to investigate the effect of the removal of sections of an earth berm supporting an embedded retaining wall. For the particular wall-berm geometry and ground conditions considered in these analyses, relationships between the wall movement, the length of berm section removed, the spacing between successive unsupported sections, and the time elapsed following excavation are presented and discussed. The analyses show that, for a given elapsed time, wall movements are proportional to the length of the excavated berm section provided that the unsupported sections are sufficiently widely spaced. If the spacing between unsupported sections is reduced below some critical value, wall movements then depend on both the length of and distance between the excavated berm sections.Key words: finite element analyses, diaphragm walls, earth berms, construction sequence, three-dimensional effects.
APA, Harvard, Vancouver, ISO, and other styles
6

Weinzierl, S. "Infrared finite cross sections at NNLO." Nuclear Physics B - Proceedings Supplements 135 (October 2004): 46–50. http://dx.doi.org/10.1016/j.nuclphysbps.2004.09.009.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Lindner, Marko, and Steffen Roch. "Finite Sections of Random Jacobi Operators." SIAM Journal on Numerical Analysis 50, no. 1 (January 2012): 287–306. http://dx.doi.org/10.1137/100813877.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Robert, Leonel, and Luis Santiago. "Finite sections method for Hessenberg matrices." Journal of Approximation Theory 123, no. 1 (July 2003): 68–88. http://dx.doi.org/10.1016/s0021-9045(03)00067-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Roch, Steffen. "Finite sections of band-dominated operators." Memoirs of the American Mathematical Society 191, no. 895 (2008): 0. http://dx.doi.org/10.1090/memo/0895.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Percus, J. K. "Finite sections of toeplitz-like matrices." Communications on Pure and Applied Mathematics 38, no. 6 (November 1985): 835–44. http://dx.doi.org/10.1002/cpa.3160380612.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Finite sections"

1

Boubez, Toufic I. "Three-dimensional finite-element mesh generation using serial sections." Thesis, McGill University, 1986. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=63804.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kucukarslan, Sertac. "A Finite Element Study On The Effective Width Of Flanged Sections." Master's thesis, METU, 2010. http://etd.lib.metu.edu.tr/upload/12612180/index.pdf.

Full text
Abstract:
Most of the reinforced concrete systems are monolithic. During construction, concrete from the bottom of the deepest beam to the top of slab, is placed at once. Therefore the slab serves as the top flange of the beams. Such a beam is referred to as T-beam. In a floor system made of T-beams, the compressive stress is a maximum over the web, dropping between the webs. The distribution of compressive stress on the flange depends on the relative dimensions of the cross section, span length, support and loading conditions. For simplification, the varying distribution of compressive stress can be replaced by an equivalent uniform distribution. This gives us an effective flange width, which is smaller than the real flange width. In various codes there are recommendations for effective flange width formulas. But these formulas are expressed only in terms of span length or flange and web thicknesses and ignore the other important variables. In this thesis, three-dimensional finite element analysis has been carried out on continuous T-beams under different loading conditions to assess the effective flange width based on displacement criterion. The formulation is based on a combination of the elementary bending theory and the finite element method, accommodating partial interaction in between. The beam spacing, beam span length, total depth of the beam, the web and the flange thicknesses are considered as independent variables. Depending on the type of loading, the numerical value of the moment of inertia of the transformed beam crosssection and hence the effective flange width are calculated. The input data and the finite element displacement results are then used in a nonlinear regression analysis and two explicit design formulas for effective flange width have been derived. Comparisons are made between the proposed formulas and the ACI, Eurocode, TS-500 and BS-8110 code recommendations.
APA, Harvard, Vancouver, ISO, and other styles
3

Goudet, Catherine A. "Finite element analysis of diseased cross-sections of human carotid arteries." Thesis, Georgia Institute of Technology, 1995. http://hdl.handle.net/1853/16816.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Roodbaraky, K. "Finite element modelling of tubular cross joints in rectangular hollow sections." Thesis, University of Nottingham, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.384702.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Nukala, Ramanand. "Efficient finite element modeling of WT sections subjected to uniaxial tension." Morgantown, W. Va. : [West Virginia University Libraries], 2001. http://etd.wvu.edu/templates/showETD.cfm?recnum=2091.

Full text
Abstract:
Thesis (M.S.)--West Virginia University, 2001.
Title from document title page. Document formatted into pages; contains vii, [90] p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 62-63).
APA, Harvard, Vancouver, ISO, and other styles
6

Riquelme, Faúndez Edgardo. "Algorithms for l-sections on genus two curves over finite fields and applications." Doctoral thesis, Universitat de Lleida, 2016. http://hdl.handle.net/10803/393881.

Full text
Abstract:
We study \ell-section algorithms for Jacobian of genus two over finite fields. We provide trisection (division by \ell=3) algorithms for Jacobians of genus 2 curves over finite fields \F_q of odd and even characteristic. In odd characteristic we obtain a symbolic trisection polynomial whose roots correspond (bijectively) to the set of trisections of the given divisor. We also construct a polynomial whose roots allow us to calculate the 3-torsion divisors. We show the relation between the rank of the 3-torsion subgroup and the factorization of this 3-torsion polynomial, and describe the factorization of the trisection polynomials in terms of the galois structure of the 3- torsion subgroup. We generalize these ideas and we determine the field of definition of an \ell-section with \ell \in {3, 5, 7}. In characteristic two for non-supersingular hyperelliptic curves we characterize the 3-torsion divisors and provide a polynomial whose roots correspond to the set of trisections of the given divisor. We also present a generalization of the known algorithms for the computation of the 2-Sylow subgroup to the case of the \ell-Sylow subgroup in general and we present explicit algorithms for the computation of the 3-Sylow subgroup. Finally we show some examples where we can obtain the central coefficients of the characteristic polynomial of the Frobenius endomorphism reduced modulo 3 using the generators obtained with the 3-Sylow algorithm.
En esta tesis se estudian algoritmos de \ell-división para Jacobianas de curvas de género 2. Se presentan algoritmos de trisección (división por \ell=3) para Jacobianas de curvas de género 2 definidas sobre cuerpos finitos \F_q de característica par o impar indistintamente. En característica impar se obtiene explícitamente un polinomio de trisección, cuyas raíces se corresponden biyectivamente con el conjunto de trisecciones de un divisor cualquiera de la Jacobiana. Asimismo se proporciona otro polinomio a partir de cuyas raíces se calcula el conjunto de los divisores de orden 3. Se muestra la relación entre el rango del subgrupo de 3-torsión y la factorización del polinomio de la 3- torsión, y se describe la factorización del polinomio de trisección en términos de las órbitas galoisianas de la 3- torsión. Se generalizan estas ideas para otros valores de \ell y se determina el cuerpo de definición de una \ell-sección para \ell=3,5,7. Para curvas no-supersingulares en característica par también se da una caracterización de la 3-torsión y se proporciona un polinomio de trisección para un divisor cualquiera. Se da una generalización, para \ell arbitraria, de los algoritmos conocidos para el cómputo explícito del subgrupo de 2-Sylow, y se detalla explícitamente el algoritmo para el cómputo del subgrupo de 3-Sylow. Finalmente, se dan ejemplos de cómo obtener los valores de la reducción módulo 3 de los coeficientes centrales del polinomio característico del endomorfismo de Frobenius mediante los generadores proporcionados por el algoritmo de cálculo del 3-Sylow.
En aquesta tesi s'estudien algoritmes de \ell-divisió per a grups de punts de Jacobianes de corbes de gènere 2. Es presenten algoritmes de trisecció (divisió per \ell=3) per a Jacobianes de corbes de gènere 2 definides sobre cossos finits \F_q de característica parell o senar indistintament. En característica parell s'obté explícitament un polinomi de trisecció, les arrels del qual estan en bijecció amb el conjunt de triseccions d'un divisor de la Jacobiana qualsevol. De manera semblant, es proporciona un altre polinomi amb les arrels del qual es calcula el conjunt dels divisors d'ordre 3. Es mostra la relació entre el rang del subgrup de 3-torsió i la factorització del polinomi de la 3-torsió, i es descriu la factorització del polinomi de trisecció en termes de les òrbites galoisianes de la 3-torsió. Es generalitzen aquestes idees a altres valors de \ell i es determina el cos de definició d'una \ell-secció per a \ell=3,5,7. Per a corbes nosupersingulars en característica 2 també es proporciona una caracterització de la 3-torsió i un polinomi de trisecció per a un divisor qualsevol. Es dóna una generalització, per a \ell arbitrària, dels algoritmes coneguts per al càlcul explícit del subgrup de 2-Sylow, i es detalla explícitament en el cas del 3-Sylow. Finalment es mostren exemples de com obtenir els valors de la reducció mòdul 3 dels coeficients centrals del polinomi característic de l'endomorfisme de Frobenius fent servir els generadors proporcionats per l'algoritme de càlcul del 3-Sylow.
APA, Harvard, Vancouver, ISO, and other styles
7

Sousa, Yuri Teixeira e. "Kinematically exact elastoplastic analysis of steelo rods with compact cross sections." Universidade de São Paulo, 2017. http://www.teses.usp.br/teses/disponiveis/3/3144/tde-05122017-134523/.

Full text
Abstract:
In this work, we present the formulation and implementation of two elastoplastic constitutive equations for kinematically exact thin-walled rod models. The first uses the fact that first order strains due to cross sectional shear stresses and warping are considered to formulate a small strains three-dimensional elastoplastic constitutive model. Given the kinematical hypothesis of non-deformability of the cross section in the projection of its plane, we may also assume that plastic deformations may occur due only to the cross sectional normal stresses, thereby allowing us to formulate a second, simple one-dimensional framework. Our approach adopts a standard additive decomposition of the strains together with a linear elastic relation for the elastic part of the deformation. Both ideal plasticity and plasticity with (linear) isotropic hardening are considered. The models have a computational implementation within a finite element thin-walled rod model and, following the kinematics adopted, we implement this equation on models with consideration of the warping of the cross sections, having 7 degrees of freedom. The formulation and implementation presented is validated by the analysis of problems known in the literature and comparison of the results. We believe that simple elastoplastic models combined with robust thin-walled rod finite element may be a useful tool for the analysis of thin-walled rod structures, such as, e.g., steel structures.
Neste trabalho, apresentamos a formulação e implementação de duas equações constitutivas elastoplásticas simples para modelos de barra de parede fina cinematicamente exatos. O primeiro usa o fato de deformações de primeira ordem devido a esforço cortante na seção transversal e empenamento serem considerados para formular um modelo constitutivo elastoplástico tridimensional para pequenas deformações. Dada a hipótese cinemática de não deformabilidade da seção transversal da barra na projeção de seu plano, podemos também assumir que deformações plásticas ocorrem devido apenas às tensões normais à seção transversal, nos permitindo formular um segundo modelo unidimensional simples. Nossa abordagem adota uma decomposição aditiva padrão das deformações com uma relação elástica linear para a parte elástica das deformações. Tanto plasticidade ideal quanto plasticidade com encruamento isótropo (linear) são considerados. Os modelos resultantes têm uma implementação computacional com elementos finitos de barras e, de acordo com a cinemática adotada, implementamos esta equação com consideração do empenamento das seções transversais, possuindo 7 graus de liberdade. A formulação e implementação apresentadas são validadas pela análise de problemas conhecidos na literatura e comparação dos resultados. Acreditamos que modelos elastoplásticos simples combinados com um elemento finito de barras robusto podem ser uma ferramenta útil para a análise de estruturas reticuladas como, por exemplo, estruturas de aço.
APA, Harvard, Vancouver, ISO, and other styles
8

Cheng, Shanshan. "Fire performance of cold-formed steel sections." Thesis, University of Plymouth, 2015. http://hdl.handle.net/10026.1/3316.

Full text
Abstract:
Thin-walled cold-formed steel (CFS) has exhibited inherent structural and architectural advantages over other constructional materials, for example, high strength-to-weight ratio, ease of fabrication, economy in transportation and the flexibility of sectional profiles, which make CFS ideal for modern residential and industrial buildings. They have been increasingly used as purlins as the intermediate members in a roof system, or load-bearing components in low- and mid-rise buildings. However, using CFS members in building structures has been facing challenges due to the lack of knowledge to the fire performance of CFS at elevated temperatures and the lack of fire design guidelines. Among all available design specifications of CFS, EN1993-1-2 is the only one which provided design guidelines for CFS at elevated temperatures, which, however, is based on the same theory and material properties of hot-rolled steel. Since the material properties of CFS are found to be considerably different from those of hot-rolled steel, the applicability of hot-rolled steel design guidelines into CFS needs to be verified. Besides, the effect of non-uniform temperature distribution on the failure of CFS members is not properly addressed in literature and has not been specified in the existing design guidelines. Therefore, a better understanding of fire performance of CFS members is of great significance to further explore the potential application of CFS. Since CFS members are always with thin thickness (normally from 0.9 to 8 mm), open cross-section, and great flexural rigidity about one axis at the expense of low flexural rigidity about a perpendicular axis, the members are usually susceptible to various buckling modes which often govern the ultimate failure of CFS members. When CFS members are exposed to a fire, not only the reduced mechanical properties will influence the buckling capacity of CFS members, but also the thermal strains which can lead additional stresses in loaded members. The buckling behaviour of the member can be analysed based on uniformly reduced material properties when the member is unprotected or uniformly protected surrounded by a fire that the temperature distribution within the member is uniform. However if the temperature distribution in a member is not uniform, which usually happens in walls and/or roof panels when CFS members are protected by plaster boards and exposed to fire on one side, the analysis of the member becomes very complicated since the mechanical properties such as Young’s modulus and yield strength and thermal strains vary within the member. This project has the aim of providing better understanding of the buckling performance of CFS channel members under non-uniform temperatures. The primary objective is to investigate the fire performance of plasterboard protected CFS members exposed to fire on one side, in the aspects of pre-buckling stress distribution, elastic buckling behaviour and nonlinear failure models. Heat transfer analyses of one-side protected CFS members have been conducted firstly to investigate the temperature distributions within the cross-section, which have been applied to the analytical study for the prediction of flexural buckling loads of CFS columns at elevated temperatures. A simplified numerical method based on the second order elastic – plastic analysis has also been proposed for the calculation of the flexural buckling load of CFS columns under non-uniform temperature distributions. The effects of temperature distributions and stress-strain relationships on the flexure buckling of CFS columns are discussed. Afterwards a modified finite strip method combined with the classical Fourier series solutions have been presented to investigate the elastic buckling behaviour of CFS members at elevated temperatures, in which the effects of temperatures on both strain and mechanical properties have been considered. The variations of the elastic buckling loads/moments, buckling modes and slenderness of CFS columns/beams with increasing temperatures have been examined. The finite element method is also used to carry out the failure analysis of one-side protected beams at elevated temperatures. The effects of geometric imperfection, stress-strain relationships and temperature distributions on the ultimate moment capacities of CFS beams under uniform and non-uniform temperature distributions are examined. At the end the direct strength method based design methods have been discussed and corresponding recommendations for the designing of CFS beams at elevated temperatures are presented. This thesis has contributed to improve the knowledge of the buckling and failure behaviour of CFS members at elevated temperatures, and the essential data provided in the numerical studies has laid the foundation for further design-oriented studies.
APA, Harvard, Vancouver, ISO, and other styles
9

Brackus, Travis R. "Destructive Testing and Finite-Element Modeling of Full-Scale Bridge Sections Containing Precast Deck Panels." DigitalCommons@USU, 2010. https://digitalcommons.usu.edu/etd/861.

Full text
Abstract:
Full-depth, precast panel deck systems are becoming more common in bridge installation and repair. The objective of these systems is to achieve the performance of cast-in-place systems while simultaneously saving time and money. The structural behavior of these systems has been the subject of scrutiny in recent research. The Utah Department of Transportation demolished a steel I-girder bridge containing a precast panel deck system and provided two full-scale specimens for this project. Destructive testing was performed at Utah State University on the specimens to investigate three failure modes: flexural, beam shear, and punching shear. Finite-element models were created using ANSYS software to replicate experimental behavior. Overall, it was found that the elastic, post-elastic, and ultimate behavior of the full-scale bridge sections containing precast panel deck systems can be accurately predicted in analytical models. Another aspect of this project was to investigate changes in dynamic behavior as the system was subjected to flexural yield and failure. Point loads were applied and removed in increments, and dynamic testing was conducted at each load level. It was found that significant damage is somewhat noticeable by monitoring the changes in natural frequencies.
APA, Harvard, Vancouver, ISO, and other styles
10

Ori, Miklós. "Local Buckling of Doubly-Symmetric I-Sections Subjected to Warping Torsion : The limitations of the Reduced Cross-Section Method under unconventional loading." Thesis, KTH, Bro- och stålbyggnad, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-251031.

Full text
Abstract:
In regular design practice, when it comes to conventional loading, such as uniaxial compression and bending, the local buckling of thin plates is taken care of through cross section classification. The effect of warping torsion, which also gives rise to normal stresses in the section, however, is typically not considered in the process. Present work aimed to uncover the influence of warping torsion on the phenomena of local plate buckling and to investigate the limitations of the effective width method when it was applied against its intended use. In the case of varying results, a simple correction to the calculation method was to be developed to improve accuracy. The examined I-sections were tested to failure and results were obtained with two different approaches: with finite element method and a Eurocode-based hand-calculation. The finite element models were refined to closely mimic physical experiments and their results were accepted as the true resistance of the sections, while the calculation method tried to capture the structural response in a practical, easily understandable way. The calculated results showed reasonably good accuracy with that of the finite element analysis. However, what really stood out was how similar the change in resistance was when the section parameters were manipulated. Through a properly chosen function, this allowed for the creation of an exponent that could modify the calculated results to achieve an even greater accuracy. The eccentricity of the applied load on the system was also manipulated to alter the proportion of normal stresses due to the two examined effects. It became clear that the stresses from warping in the applied calculation model were underestimated and the otherwise conservative method of effective width lost much of its safety margin when its application was extended to warping as well. Consequently, the consideration of stresses from warping in the regular design process and stability control of commonly used thin walled open sections seemed to be justified. The effective width method could not reliably cover the issue with retaining its original margin of safety.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Finite sections"

1

Wu, Jie. A least-squares finite element method for electromagnetic scattering problems. [Cleveland, Ohio]: National Aeronautics and Space Administration, Lewis Research Center, Institute for Computational Mechanics in Propulsion, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Jie, Wu. A least-squares finite element method for electromagnetic scattering problems. [Cleveland, Ohio]: National Aeronautics and Space Administration, Lewis Research Center, Institute for Computational Mechanics in Propulsion, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wen, Shuwen. Elastic-plastic finite-element modelling of section rolling. Birmingham: University of Birmingham, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Robert, Oliver. Reduced fusion systems over 2-groups of sectional rank at most 4. Providence, Rhode Island: American Mathematical Society, 2016.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Ciccarelli, G. Structural analysis of the 1.8 meter blast tube driver section (U). Ralston, Alta: Defence Research Establishment Suffield, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Demuren, A. O. Calculation of turbulence-driven secondary motion in ducts with arbitrary cross section. Cleveland, Ohio: Institute for Computational Mechanics in Propulsion, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Morse, Robert Fitzgerald, editor of compilation, Nikolova-Popova, Daniela, 1952- editor of compilation, and Witherspoon, Sarah J., 1966- editor of compilation, eds. Group theory, combinatorics and computing: International Conference in honor of Daniela Nikolova-Popova's 60th birthday on Group Theory, Combinatorics and Computing, October 3-8, 2012, Florida Atlantic University, Boca Raton, Florida. Providence, Rhode Island: American Mathematical Society, 2013.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Danièle, Mazingarbe, ed. Les reliques sacrées d'Hitler. Paris: Cherche midi, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

From riches to raags: 3-manifolds, right-angled artin groups, and cubical geometry. Providence, Rhode Island: Published for the Conference Board of the Mathematical Sciences by the American Mathematical Society, Providence, Rhode Island with support from the National Science Foundation, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Flannery, D. L. (Dane Laurence), 1965-, ed. Algebraic design theory. Providence, R.I: American Mathematical Society, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Finite sections"

1

Stix, Jakob. "Sections over Finite Fields." In Lecture Notes in Mathematics, 197–205. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-30674-7_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Hagen, Roland, Steffen Roch, and Bernd Silbermann. "Around finite sections of integral operators." In Spectral Theory of Approximation Methods for Convolution Equations, 337–55. Basel: Birkhäuser Basel, 1995. http://dx.doi.org/10.1007/978-3-0348-9067-0_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Rabinovich, Vladimir, Bernd Silbermann, and Steffen Roch. "Finite Sections of Band-dominated Operators." In Limit Operators and Their Applications in Operator Theory, 303–44. Basel: Birkhäuser Basel, 2004. http://dx.doi.org/10.1007/978-3-0348-7911-8_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Lindner, Marko, and Hagen Söding. "Finite sections of the Fibonacci Hamiltonian." In The Diversity and Beauty of Applied Operator Theory, 381–96. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-75996-8_20.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Silbermann, Bernd. "Toeplitz-Like Operators and their Finite Sections." In Recent Developments in Operator Theory and Its Applications, 386–98. Basel: Birkhäuser Basel, 1996. http://dx.doi.org/10.1007/978-3-0348-9035-9_18.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Rabinovich, Vladimir S., and Steffen Roch. "Finite Sections of Band-dominated Operators on Discrete Groups." In Recent Progress in Operator Theory and Its Applications, 239–53. Basel: Springer Basel, 2012. http://dx.doi.org/10.1007/978-3-0348-0346-5_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kulkarni, Swati Ajay, and Gaurang Vesmawala. "Parallel Flange I-Beam Sections—Theoretical Study and Finite Element Analysis." In Advances in Structural Engineering, 559–66. New Delhi: Springer India, 2014. http://dx.doi.org/10.1007/978-81-322-2190-6_45.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Seidel, Markus, and Bernd Silbermann. "Finite Sections of Band-dominated Operators – Norms, Condition Numbers and Pseudospectra." In Operator Theory, Pseudo-Differential Equations, and Mathematical Physics, 375–90. Basel: Springer Basel, 2012. http://dx.doi.org/10.1007/978-3-0348-0537-7_19.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Roch, Steffen, and Pedro A. Santos. "A Tour to Compact Type Operators and Sequences Related to the Finite Sections Projection." In Operator Theory, Operator Algebras and Applications, 311–23. Basel: Springer Basel, 2014. http://dx.doi.org/10.1007/978-3-0348-0816-3_19.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Pham, Ngoc Hieu, Cao Hung Pham, and Kim J. R. Rasmussen. "Incorporation of Measured Geometric Imperfections into Finite Element Models for Cold-Rolled Aluminium Sections." In Lecture Notes in Civil Engineering, 161–71. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-6713-6_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Finite sections"

1

"Analytical Study of Torsional Moment Induced by Shifting of Shear Center of RC Cross Sections." In SP-237: Finite Element Analysis of Reinforced Concrete Structures. American Concrete Institute, 2006. http://dx.doi.org/10.14359/18253.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Mathiyazhagan, G., and N. Vasiraja. "Finite element analysis on curved beams of various sections." In 2013 International Conference on Energy Efficient Technologies for Sustainability (ICEETS). IEEE, 2013. http://dx.doi.org/10.1109/iceets.2013.6533377.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Mital, Subodh K., Robert K. Goldberg, and Peter J. Bonacuse. "Two-Dimensional Nonlinear Finite Element Analysis of CMC Microstructures." In ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/gt2011-45930.

Full text
Abstract:
Detailed two-dimensional finite element analyses of the cross-sections of a model CVI (chemical vapor infiltrated) SiC/SiC (silicon carbide fiber in a silicon carbide matrix) ceramic matrix composites are performed. High resolution images of the cross-section of this composite material are generated using serial sectioning of the test specimens. These images are then used to develop very detailed finite element models of the cross-sections using the public domain software OOF2 (Object Oriented Analysis of Material Microstructures). Examination of these images shows that these microstructures have significant variability and irregularity. How these variabilities manifest themselves in the variability in effective properties as well as the stress distribution, damage initiation and damage progression is the overall objective of this work. Results indicate that even though the macroscopic stress-strain behavior of various sections analyzed is very similar, each section has a very distinct damage pattern when subjected to inplane tensile loads and this damage pattern seems to follow the unique architectural and microstructural details of the analyzed sections.
APA, Harvard, Vancouver, ISO, and other styles
4

IMAYOSHI, YOICHI, and TOSHIHIRO NOGI. "A REMARK ON HOLOMORPHIC SECTIONS OF CERTAIN HOLOMORPHIC FAMILIES OF RIEMANN SURFACES." In Proceedings of the 13th International Conference on Finite or Infinite Dimensional Complex Analysis and Applications. WORLD SCIENTIFIC, 2006. http://dx.doi.org/10.1142/9789812773159_0009.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Yao, Jian, Jia Xu, and Li Xing. "Finite element analysis of bonding connections between cold-formed steel Z sections." In 2011 Second International Conference on Mechanic Automation and Control Engineering (MACE). IEEE, 2011. http://dx.doi.org/10.1109/mace.2011.5988356.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Ramírez-López, A., D. Muñoz-Negron, M. Palomar-Pardeve, M. A. Romero-Romo, and V. Cruz-Morales. "Using finite difference to solve heat removal in metallic sections industrially produced." In NUMERICAL ANALYSIS AND APPLIED MATHEMATICS ICNAAM 2012: International Conference of Numerical Analysis and Applied Mathematics. AIP, 2012. http://dx.doi.org/10.1063/1.4756654.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Sancaktar, Erol, and Kiran Narayan. "A Unified Approach to Mechanical Adhesion by Finite Element Analysis of Straight Sections." In ASME 1998 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/imece1998-1114.

Full text
Abstract:
Abstract The primary objective of this study was to optimize the geometry and volume of the substrate in lap, butt and scarf adhesive joints under various loading and boundary conditions by finite element analysis. The finite element models are validated by evaluating for convergence and by calculating theoretical values using strength of materials and applied elasticity. The results of this study are significant in optimizing mechanical adhesion because any real joint surface may contain a combination of the above model joints on a smaller scale. Studying the behavior of these basic models will help in optimizing topography of surfaces to be bonded. As a novel approach for design purposes new parameters involving stress times joint volume and stress divided by joint volume as well as stress gradients are considered. Finite element meshes of the basic lap, butt and four scarf joints (30°, 45°, 60°, 75°) having 25.4 mm adhesive length are completed. Upon validation of these models, they are subjected to various loading and boundary conditions and results obtained. Several models are created to evaluate the effect of the volume of substrate in the lap and butt joints. Considering the fact that large strain gradients result in failure, this study focuses not only on the magnitudes, but also on the gradients of stresses and strains in optimizing the joint strength. This study has concluded that there exist significant differences in the interfacial stresses with respect to the scarf angle, considering lap and butt to be special cases of scarf with 0° and 90° angles, as well as with respect to the adhesive material properties.
APA, Harvard, Vancouver, ISO, and other styles
8

Couturier, Philippe, and Steen Krenk. "General Beam Cross-Section Analysis Using a 3D Finite Element Slice." In ASME 2014 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/imece2014-36721.

Full text
Abstract:
A formulation for analysis of general cross-section properties has been developed. This formulation is based on the stress-strain states in the classic six equilibrium modes of a beam by considering a finite thickness slice modelled by a single layer of 3D finite elements. The displacement variation in the lengthwise direction is in the form of a cubic polynomial, which is here represented by Hermitian interpolation, whereby the degrees of freedom are concentrated on the front and back faces of the slice. The theory is illustrated by application to a simple cross-section for which an analytical solution is available. The paper also shows an application to wind turbine blade cross-sections and discusses the effect of the finite element discretization on the cross-section properties such as stiffness parameters and the location of the elastic and shear centers.
APA, Harvard, Vancouver, ISO, and other styles
9

ROY, RINTO, MARCO GHERLONE, and CECILIA SURACE. "Shape Sensing of Beams with Complex Cross-sections Using the Inverse Finite Element Method." In Structural Health Monitoring 2019. Lancaster, PA: DEStech Publications, Inc., 2019. http://dx.doi.org/10.12783/shm2019/32104.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

TESCHKE, ULF. "The Expansion of the Bernoulli Equation to Finite Flow Cross Sections at One Level." In 38th IAHR World Congress. The International Association for Hydro-Environment Engineering and Research (IAHR), 2019. http://dx.doi.org/10.3850/38wc092019-0724.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Finite sections"

1

Ajeesh, S. S., and Jayachandran S. Arul. ELASTIC BUCKLING OF COLD-FORMED STEEL COMPLEX CROSS SECTIONS USING CONSTRAINED SPLINE FINITE STRIP METHOD (CSFSM). The Hong Kong Institute of Steel Construction, December 2018. http://dx.doi.org/10.18057/icass2018.p.147.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Roesler, Jeffery, Roberto Montemayor, John DeSantis, and Prakhar Gupta. Evaluation of Premature Cracking in Urban Concrete Pavement. Illinois Center for Transportation, January 2021. http://dx.doi.org/10.36501/0197-9191/21-001.

Full text
Abstract:
This study investigated the causes for premature, transverse cracking on urban jointed plain concrete pavements in Illinois. A field survey of 67 sections throughout Illinois coupled with ultrasonic evaluation was completed to synthesize the extent of premature cracking on urban JPCP. The visual survey showed some transverse and longitudinal cracks were a result of improper slab geometry (excessive slab length and width). Ultrasonic tests over the contraction joints determined some notched joints had not activated and adjacent transverse cracks were likely formed as a result. Three-dimensional finite-element analyses confirmed that cracking would not develop as a result of normal environmental factors and slab-base frictional restraint. The concrete mixture also did not appear to be a contributing factor to the premature cracks. Finally, the lack of lubrication on dowel bars was determined to potentially be a primary mechanism that could restrain the transverse contraction joints, produce excessive tensile stresses in the slab, and cause premature transverse cracks to develop.
APA, Harvard, Vancouver, ISO, and other styles
3

Martín, A., L. Cirrottola, A. Froehly, R. Rossi, and C. Soriano. D2.2 First release of the octree mesh-generation capabilities and of the parallel mesh adaptation kernel. Scipedia, 2021. http://dx.doi.org/10.23967/exaqute.2021.2.010.

Full text
Abstract:
This document presents a description of the octree mesh-generation capabilities and of the parallel mesh adaptation kernel. As it is discussed in Section 1.3.2 of part B of the project proposal there are two parallel research lines aimed at developing scalable adaptive mesh refinement (AMR) algorithms and implementations. The first one is based on using octree-based mesh generation and adaptation for the whole simulation in combination with unfitted finite element methods (FEMs) and the use of algebraic constraints to deal with non-conformity of spaces. On the other hand the second strategy is based on the use of an initial octree mesh that, after make it conforming through the addition of templatebased tetrahedral refinements, is adapted anisotropically during the calculation. Regarding the first strategy the following items are included:
APA, Harvard, Vancouver, ISO, and other styles
4

McCormack, Thomas. A finite difference soil-structure interaction study of a section of the Bonneville Navigation Lock buttress diaphragm wall utilizing pressuremeter test results. Portland State University Library, January 2000. http://dx.doi.org/10.15760/etd.5599.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Jeon, Byoung Kyu, Won Sik Yang, Kang Seog Kim, and Kevin T. Clarno. Development of Ultra-Fine Multigroup Cross Section Library of the AMPX/SCALE Code Packages. Office of Scientific and Technical Information (OSTI), January 2018. http://dx.doi.org/10.2172/1437904.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Midwinter, D., T. Hadlari, and K. Dewing. Upper Triassic to Lower Jurassic stratigraphy along the northeastern margin of the Sverdrup Basin, Axel Heiberg and Ellesmere islands, Nunavut: new data from measured sections. Natural Resources Canada/CMSS/Information Management, 2022. http://dx.doi.org/10.4095/329398.

Full text
Abstract:
Two stratigraphic sections were measured through Late Triassic - Early Jurassic aged strata in the Blue Mountains map area (NTS 340-B/11) on Ellesmere Island and the Depot Point map area (NTS 049-G/7) on Axel Heiberg Island. These sections are subdivided in terms of established member and formation names based on previous mapping along the north-eastern margin of the Sverdrup Basin. The lowermost strata in the Heiberg Formation, the Romulus Member (510-575 m thick), is a coarsening-upward succession of mudstone to fine-grained sandstone from a prodelta to delta plain environment. The overlying Fosheim Member (317-425 m) is a coal-bearing and sandstone-rich interval from a mixed alluvial-marine environment, such as a delta plain. It is overlain by the Remus Member (100-112 m); a sandstone-rich unit representative of shallow marine deposits. The Heiberg Formation at Depot Point is of similar thickness (1009 m) to the Blue Mountains (1035 m) and may represent a marginally more distal basinal setting with a thinner Fosheim Member but a slightly thicker Romulus and Remus members.
APA, Harvard, Vancouver, ISO, and other styles
7

Ingersoll, D. T., J. E. White, R. Q. Wright, H. T. Hunter, C. O. Slater, N. M. Greene, R. W. Roussin, and R. E. MacFarlane. Production and testing of the VITAMIN-B6 fine group and the BUGLE-93 broad-group neutron/photon cross-section libraries derived from ENDF/B-VI nuclear data. Office of Scientific and Technical Information (OSTI), January 1995. http://dx.doi.org/10.2172/10108149.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

White, J. E. Production and Testing of the VITAMIN-B6 Fine Group and the BUGLE-93 Broad-Group Neutron/Photon Cross-Section Libraries Derived from ENDF/B-VI Nuclear Data. Office of Scientific and Technical Information (OSTI), April 2001. http://dx.doi.org/10.2172/779795.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Risner, J. M., D. Wiarda, M. E. Dunn, T. M. Miller, D. E. Peplow, and B. W. Patton. Production and Testing of the VITAMIN-B7 Fine-Group and BUGLE-B7 Broad-Group Coupled Neutron/Gamma Cross-Section Libraries Derived from ENDF/B-VII.0 Nuclear Data. Office of Scientific and Technical Information (OSTI), September 2011. http://dx.doi.org/10.2172/1411183.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Brophy, Kenny, and Alison Sheridan, eds. Neolithic Scotland: ScARF Panel Report. Society of Antiquaries of Scotland, June 2012. http://dx.doi.org/10.9750/scarf.06.2012.196.

Full text
Abstract:
The main recommendations of the Panel report can be summarised as follows: The Overall Picture: more needs to be understood about the process of acculturation of indigenous communities; about the Atlantic, Breton strand of Neolithisation; about the ‘how and why’ of the spread of Grooved Ware use and its associated practices and traditions; and about reactions to Continental Beaker novelties which appeared from the 25th century. The Detailed Picture: Our understanding of developments in different parts of Scotland is very uneven, with Shetland and the north-west mainland being in particular need of targeted research. Also, here and elsewhere in Scotland, the chronology of developments needs to be clarified, especially as regards developments in the Hebrides. Lifeways and Lifestyles: Research needs to be directed towards filling the substantial gaps in our understanding of: i) subsistence strategies; ii) landscape use (including issues of population size and distribution); iii) environmental change and its consequences – and in particular issues of sea level rise, peat formation and woodland regeneration; and iv) the nature and organisation of the places where people lived; and to track changes over time in all of these. Material Culture and Use of Resources: In addition to fine-tuning our characterisation of material culture and resource use (and its changes over the course of the Neolithic), we need to apply a wider range of analytical approaches in order to discover more about manufacture and use.Some basic questions still need to be addressed (e.g. the chronology of felsite use in Shetland; what kind of pottery was in use, c 3000–2500, in areas where Grooved Ware was not used, etc.) and are outlined in the relevant section of the document. Our knowledge of organic artefacts is very limited, so research in waterlogged contexts is desirable. Identity, Society, Belief Systems: Basic questions about the organisation of society need to be addressed: are we dealing with communities that started out as egalitarian, but (in some regions) became socially differentiated? Can we identify acculturated indigenous people? How much mobility, and what kind of mobility, was there at different times during the Neolithic? And our chronology of certain monument types and key sites (including the Ring of Brodgar, despite its recent excavation) requires to be clarified, especially since we now know that certain types of monument (including Clava cairns) were not built during the Neolithic. The way in which certain types of site (e.g. large palisaded enclosures) were used remains to be clarified. Research and methodological issues: There is still much ignorance of the results of past and current research, so more effective means of dissemination are required. Basic inventory information (e.g. the Scottish Human Remains Database) needs to be compiled, and Canmore and museum database information needs to be updated and expanded – and, where not already available online, placed online, preferably with a Scottish Neolithic e-hub that directs the enquirer to all the available sources of information. The Historic Scotland on-line radiocarbon date inventory needs to be resurrected and kept up to date. Under-used resources, including the rich aerial photography archive in the NMRS, need to have their potential fully exploited. Multi-disciplinary, collaborative research (and the application of GIS modelling to spatial data in order to process the results) is vital if we are to escape from the current ‘silo’ approach and address key research questions from a range of perspectives; and awareness of relevant research outside Scotland is essential if we are to avoid reinventing the wheel. Our perspective needs to encompass multi-scale approaches, so that ScARF Neolithic Panel Report iv developments within Scotland can be understood at a local, regional and wider level. Most importantly, the right questions need to be framed, and the right research strategies need to be developed, in order to extract the maximum amount of information about the Scottish Neolithic.
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Finite sections' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography