Relevant bibliographies by topics / FINCS

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'FINCS'

Author: Grafiati
Published: 9 March 2023
Last updated: 10 March 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'FINCS.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "FINCS"

1

Hinojosa-Cuéllar, José Alfonso, Jorge Oliva-Hernández, José Candelario Segura-Correa, and Glafiro Torres-Hernández. "Importancia del peso de la oveja al parto en el comportamiento predestete de corderos Pelibuey." Revista de Investigaciones Veterinarias del Perú 30, no. 4 (February 4, 2020): 1569–78. http://dx.doi.org/10.15381/rivep.v30i4.17267.

Full text
Abstract:
El objetivo de este estudio fue evaluar la influencia del peso al parto de la oveja Pelibuey sobre características de crecimiento predestete de sus corderos en condiciones de clima cálido y húmedo. El estudio fue de tipo retrospectivo y se realizó con información productiva de dos fincas ovinas. Se analizaron 242 observaciones de corderos en la finca 1 y 66 en la finca 2 de los pesos al nacer, ganancia de peso predestete y peso de destete ajustado a 61 días. La información se obtuvo de 147 ovejas en la finca 1 y 42 en la finca 2. El modelo estadístico incluyó, en ambas fincas, los efectos fijos de peso de la oveja al parto (por abajo y por encima del promedio), número de parto (primíparas, multíparas), sexo del cordero (hembra y macho) y tipo de nacimiento (simple y múltiple). El peso al parto y el tipo de nacimiento afectaron (p<0.05) todas las variables dependientes en ambas fincas. El sexo del cordero (p<0.05) influyó sobre el peso de destete en la finca 1. El número de parto afectó el peso al nacer y de destete en la finca 1 (p<0.01) y peso al nacer en la finca 2 (p<0.05). En conclusión, el peso al parto afectó el comportamiento predestete de los corderos en ambas fincas. Los corderos de ovejas con un peso al parto por encima del promedio fueron más pesados al nacimiento y al destete que los corderos de ovejas con un peso al parto por debajo del promedio, y se confirma que los corderos machos, únicos y provenientes de ovejas multíparas tienen mejor comportamiento predestete con respecto a corderos hembras, múltiples y los de ovejas primíparas, respectivamente.
APA, Harvard, Vancouver, ISO, and other styles
2

Díaz, Lauro, and Nery Dominguez. "Determinación de cadmio y plomo en almendras de cacao (theobroma cacao) provenientes de fincas de productores orgánicos del cantón Vinces." Investigación, Tecnología e Innovación 7, no. 7 (November 30, 2015): 119–33. http://dx.doi.org/10.53591/iti.v7i7.169.

Full text
Abstract:
El Ecuador es el primer productor mundial de cacao fino y de aroma (produce más del 60 % de la producción mundial), utilizado en la fabricación de chocolates de alta calidad y tipo gourmet. Las exportaciones ecuatorianas del cacao, en especial hacia los mercados Europeos, se pueden ver amenazadas por indicios de contaminación o la presencia de nivele s superiores a los permitidos por Normativas Alimentarías de la Comunidad Europea (NACE), de meta les pesados como el cadmio (Cd) y el plomo (Pb) en las almendras. El objetivo del trabajo fue determinar cadmio y plomo en almendras de cacao provenientes de finca s de pro­ ductores orgánicos del cantón Vinces. Se seleccionaron 25 fincas como unidades útiles . Para la evaluación de los resultados se aplicó la estadística no paramétrica. El mayor valor en cadmio en almendras se registró en la parroquia Antonio Sotomayor en la finca APOVinces con 0,98 ppm, y el menor valor 0,099 ppm se encontró en Poza-Seca en la finca APOVinces, con l15. En la testa el mayor valor de cadmio se registró en la finca APOVinces-NN9 Antonio Sotomayor, con 6,14 ppm y el menor con 0,081 ppm, se encontró en la finca APOVinces-21. En cuanto al plomo los mayores valores en almendras se registraron en APOVinces-NN8 y NN IO con 5,44 y 5,39 ppm, respectivamente. En cinco fincas no se detectó Pb en la testa. Los valores más altos se encontraron en las fincas APOVinces-NN 11 y NN8 con 7,57 y 7,01 ppm de Pb, respectivamente.
APA, Harvard, Vancouver, ISO, and other styles
3

Ayora Garagate, Lorenzo, José Ramírez Maldonado, and Luis Javier Cabana. "Tipificación y modelado gráfico de fincas agrícolas en la cuenca hidrográfica media y baja del río Supe (provincia de Barranca)." APORTE SANTIAGUINO 10, no. 2 (December 26, 2017): 283. http://dx.doi.org/10.32911/as.2017.v10.n2.170.

Full text
Abstract:
<p>El objetivo de la investigación fue clasificar y tipificar a los productores que conducen fincas agrícolas con cultivos prevalentes en la cuenca hidrográfica media y baja del río Supe; representar el desempeño actual de las fincas, mediante diagramas cualitativos de flujo; y diseñar mediante modelos de representación gráfica, los sistemas de fincas agrícolas mejorados; proponiendo alternativas técnicas de mejora para los niveles de agroecosistema, finca y región. La metodología utilizada consistió en efectuar el análisis multivariado utilizando un programa estadístico, seleccionando las variables más pertinentes, y determinando las tipologías de productores. Se identificaron limitaciones y potencialidades aplicando el análisis FODA, luego se procedió a jerarquizar los problemas clasificándolos según su grado de causalidad o consecuencia; se determinó cuáles son los problemas activos, pasivos, críticos e indiferentes; y su impacto en los sistemas agropecuarios de la zona en estudio. Para el diseño de las fincas, se construyeron modelos gráficos cualitativos a partir de las tipologías encontradas, considerando los datos económicos y técnicos que caracterizan los sistemas de finca.</p>
APA, Harvard, Vancouver, ISO, and other styles
4

Issar Nur Cahya, Tiara Arti, Abu Fanani, and Amiq Amiq. "INDIVIDUALISM IN ALL THE BRIGHT PLACES BY JENNIFER NIVEN." JEELL (Journal of English Education, Linguistics and Literature) English Departement of STKIP PGRI Jombang 9, no. 1 (September 1, 2022): 20. http://dx.doi.org/10.32682/jeell.v9i1.2518.

Full text
Abstract:
This article analyzes the individualism of the supporting characters towards the main character, Theodore Finch. Using descriptive and dramatic approach as the method and individualism as well as new criticism as theories, the researcher finds that the main character, Theodore Finch becomes the victim of the individualism of his teacher as well as his classmates. How the supporting characters are characterized in the analysis and how the main character is described becomes clear that individualism attached to the society Finch lives.
APA, Harvard, Vancouver, ISO, and other styles
5

Julca, Alberto. "Caracterización de Fincas Productoras de Kion (Zingiber officinale) en la Microcuenca de Alto Cuyani, Distrito de Pichanaki (Chanchamayo, Junín, Perú)." Revista Científica Pakamuros 6, no. 1 (December 21, 2018): 8. http://dx.doi.org/10.37787/pakamuros-unj.v6i1.55.

Full text
Abstract:
Este estudio se realizó en la localidad de Alto Cuyani, distrito de Pichanaki (Chanchamayo, Junín, Perú), con el objetivo de caracterizar las fincas productoras de kion. Se trabajó con una organización que cuenta con 450 productores de los cuales se tomó una muestra de 23 productores, usando el “Método de las proporciones”. Se realizó una encuesta estructurada con preguntas relacionadas a aspectos económicos, sociales y ecológicos. Los resultados muestran que el responsable de la finca es generalmente varón, mayor de 30 años con estudios de primaria completa. La finca mayormente es de 4 a 10 ha, pero sólo de 0,75 a 1,5 ha se encuentra sembrada con kion; predomina la producción orgánica, con rendimientos que van de 20 a 35 t.ha-1 y se considera a las plagas y enfermedades como los factores más limitantes del cultivo. El análisis de conglomerados por el Método de Ward con una distancia Euclidiana cuadrada de 1000, reunió las fincas en cinco grupos, estando el grupo más grande conformado por nueve fincas, lo que representa el 39,1% del total.
APA, Harvard, Vancouver, ISO, and other styles
6

Jiménez, Wilberth. "Huertos mixtos en la economía familiar en fincas del noratlánticode Costa Rica." Revista de Ciencias Ambientales 33, no. 1 (June 1, 2007): 33. http://dx.doi.org/10.15359/rca.33-1.5.

Full text
Abstract:
Se presenta los resultados de una investigación, efectuada en cinco fincas diversificadas ubicadas en los cantones de Sarapiquí, Pococí y Guácimo (región noratlántica costarricense), enfocada en los huertos mixtos tropicales familiares existentes en dichas fincas y enfilada a determinar el peso de cada huerto en cada economía familiar. A partir del estudio de casos comúnmente empleado en la investigación bajo el enfoque epistemológico histórico-cultural, se analizó cada huerto en el conjunto de cada finca, en términos de su composición y manejo; se entrevistó a los productores y productoras sobre las bondades de los huertos y se colectó información económica de éstos. Los huertos familiares estudiados no suelen sobrepasar el 10 por ciento del área de cada finca, proveen productos para el autoconsumo familiar y están vinculados al mercado de las ferias de agricultores dadas en sus cercanías. Esos huertos constituyen para las familias de pequeños/as productores/as parte de una estrategia de diversificación productiva de sus fincas, la cual garantiza parte de su seguridad alimentaria y permite contrarrestar las oscilaciones de los precios de los productos en los mercados.
APA, Harvard, Vancouver, ISO, and other styles
7

Olaya, Diana María Sánchez, Oscar Gerardo Velandia Tibáquira, and Juan Carlos Suárez Salazar. "Contribución de sistemas productivos en la generación de ingresos en familias cacaoteras, departamento del Caquetá." Revista de Ciencias Agrícolas 32, no. 1 (July 1, 2015): 37. http://dx.doi.org/10.22267/rcia.153201.23.

Full text
Abstract:
El estudio se realizó en el departamento del Caquetá, municipio de Cartagena del Chairá con el objetivo de evaluar la contribución de los sistemas productivos en la generación de ingresos en familias cacaoteras. Se definieron 22 variables cualitativas y cuantitativas, que se agruparon en cinco categorías: (i) caracterización social, (ii) características de la finca, (iii) tamaño de la finca y uso del suelo, (iv) producción pecuaria, (v) producción agrícola y forestal. En torno a las cinco categorías se generaron grupos a partir de un Análisis de Correspondencia Múltiple (ACM). Finalmente, los grupos se conglomeraron en tres clúster que presentaron diferencias significativas (P<0,05) en las variables uso del suelo e ingresos por actividades agropecuarias. Las Fincas ganaderas grandes presentaron áreas en pasturas de 109,75 ha e ingresos anuales de $15.321.250, provenientes de la actividad pecuaria. Las fincas agrícolas pequeñas tuvieron áreas en bosque de 48,78 ha, y se obtuvieron ingresos anuales de $1.170.000 derivados del bosque. Las Fincas agropecuarias medianas presentaron áreas en cultivos agrícolas de 6,89 ha, sin embargo estas fincas obtuvieron ingresos no relacionados con la producción agropecuaria de $2.052.916. Se concluye que las familias cacaoteras requieren de diferentes actividades productivas para obtener ingresos debido a que el cultivo de cacao es de subsistencia.
APA, Harvard, Vancouver, ISO, and other styles
8

Hillsman, Sally T. "Fines and Day Fines." Crime and Justice 12 (January 1990): 49–98. http://dx.doi.org/10.1086/449164.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Garcia Arboleda, Mauricio, and Nancy Barrera Marín. "Diversidad de Artrópodos en tres sistemas de manejo agronómico de café en el Municipio de Líbano – Colombia." Revista de Investigación Agraria y Ambiental 10, no. 2 (June 19, 2019): 37–50. http://dx.doi.org/10.22490/21456453.2725.

Full text
Abstract:
Se colectó, se codificó y se identificó taxonómicamente a los individuos artrópodos, hallados en 45 muestras de tres fincas, bajo el cultivo de café, sembradas en sistema orgánico, convencional o mixto, en el municipio del Líbano (Tolima, Colombia), durante el año 2014, en una investigación sobre la exergia. Se obtuvo que los artrópodos del suelo de la finca convencional (Tipo I) presenta mayor índice de diversidad que la finca orgánica y esta última mayor índice que la finca mixta. A pesar de ello, la finca orgánica presenta una mayor población de artrópodos que duplican las poblaciones de finca convencional y quintuplican las de la finca mixta. Los cual demuestra la alta interacción entre los artrópodos y la dinámica de la materia orgánica, en el rol de transformación de macromoléculas lignoceluliticas y de residuo diversidad, hacia formas más mineralizadas y en busca de la relación C/N estándar de la naturaleza.
APA, Harvard, Vancouver, ISO, and other styles
10

Ghidaglia, Jean-Michel, and Frédéric Pascal. "Passerelles volumes finis — éléments finis." Comptes Rendus de l'Académie des Sciences - Series I - Mathematics 328, no. 8 (April 1999): 711–16. http://dx.doi.org/10.1016/s0764-4442(99)80240-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "FINCS"

1

PETRAKIS, NIKOLAOS. "Objective Bayes Structure Learning in Gaussian Graphical Models." Doctoral thesis, Università degli Studi di Milano-Bicocca, 2020. http://hdl.handle.net/10281/262921.

Full text
Abstract:
Graphical models are used to represent conditional independence relationships among variables by the means of a graph, with variables corresponding to graph's nodes. They are widely used in genomic studies, finance, energy forecasting, among other fields. More specifically, for a collection of q variables with conditional independence structure represented by an undirected graph, we assume that the underlying graph's structure is unknown. We are interested in inferring the graph's structure from data at hand. This procedure the bibliography is referred to as Structure Learning, where we use certain techniques for selecting a graphical model to depict conditional independence relationships between these q variables. We start from defining a model space which is consisted by a set of all possible graphical models; then we define a scoring function which enables us to score the different models of the model space and finally, we construct a search algorithm that will navigate through the model space to identify the optimal model that explains the problem at hand. The choice of a scoring function is crucial for optimizing the search procedure through the model space. Our approach to this problem is purely Bayesian for handling uncertainty in a more elaborate fashion. We will use estimates of posterior model probabilities for ranking the models at hand. The specification of a conditional prior on the column covariance matrix is not trivial because each graph under consideration induces a different independence structure and it affects the parameter space. Under this context, we cannot directly use improper priors, since they would result to indeterminate Bayes factors, thus we are required to carefully elicit a prior distribution under each graph, a task that becomes infeasible in higher dimensions. For creating an automated Bayesian scoring technique, we resort to Objective Bayes approaches, which are initiated by an improper prior distribution and their output is a fully usable prior distributions. In this thesis, we propose the use of two alternative Objective Bayes approaches for estimating posterior probabilities of models, namely the Expected Posterior prior approach and the Power-Expected Posterior Prior approach. Both approaches utilize the device of imaginary observations for providing usable prior distributions and are theoretically sounder than the Fractional Bayes Factor of O'Hagan. Our goal is to introduce both the Expected and Power-Expected Posterior prior approaches to the field of structure learning of undirected graphical models and evaluate their performance using certain stochastic search techniques. Diverse simulation scenarios are considered as well as a real-life data application.
Graphical models are used to represent conditional independence relationships among variables by the means of a graph, with variables corresponding to graph's nodes. They are widely used in genomic studies, finance, energy forecasting, among other fields. More specifically, for a collection of q variables with conditional independence structure represented by an undirected graph, we assume that the underlying graph's structure is unknown. We are interested in inferring the graph's structure from data at hand. This procedure the bibliography is referred to as Structure Learning, where we use certain techniques for selecting a graphical model to depict conditional independence relationships between these q variables. We start from defining a model space which is consisted by a set of all possible graphical models; then we define a scoring function which enables us to score the different models of the model space and finally, we construct a search algorithm that will navigate through the model space to identify the optimal model that explains the problem at hand. The choice of a scoring function is crucial for optimizing the search procedure through the model space. Our approach to this problem is purely Bayesian for handling uncertainty in a more elaborate fashion. We will use estimates of posterior model probabilities for ranking the models at hand. The specification of a conditional prior on the column covariance matrix is not trivial because each graph under consideration induces a different independence structure and it affects the parameter space. Under this context, we cannot directly use improper priors, since they would result to indeterminate Bayes factors, thus we are required to carefully elicit a prior distribution under each graph, a task that becomes infeasible in higher dimensions. For creating an automated Bayesian scoring technique, we resort to Objective Bayes approaches, which are initiated by an improper prior distribution and their output is a fully usable prior distributions. In this thesis, we propose the use of two alternative Objective Bayes approaches for estimating posterior probabilities of models, namely the Expected Posterior prior approach and the Power-Expected Posterior Prior approach. Both approaches utilize the device of imaginary observations for providing usable prior distributions and are theoretically sounder than the Fractional Bayes Factor of O'Hagan. Our goal is to introduce both the Expected and Power-Expected Posterior prior approaches to the field of structure learning of undirected graphical models and evaluate their performance using certain stochastic search techniques. Diverse simulation scenarios are considered as well as a real-life data application.
APA, Harvard, Vancouver, ISO, and other styles
2

CARDOSO, Ricardo Alves. "Cadastro Geotécnico dos solos finos lateríticos para fins de pavimentação no município de Goiânia- GO." Universidade Federal de Goiás, 2010. http://repositorio.bc.ufg.br/tede/handle/tde/654.

Full text
Abstract:
Made available in DSpace on 2014-07-29T15:03:32Z (GMT). No. of bitstreams: 1 Dissertacao Ricardo Alves Cardoso.pdf: 84040 bytes, checksum: 709198a5f0c45658ebfc111df474a0dc (MD5) Previous issue date: 2010-08-24
This work aims at the register of geotechnical areas in Goiania-GO, showing the occurrence of fine lateritic soils with potential for use in flooring. The methodology is based on work developed by Nogami and Villibor (1995). From surveys and collecting 17 samples in field tests were conducted from MCT (Mini-MCV, Loss of mass by immersion, compression and Mini-CBR) and verified the mechanical and hydraulic properties of these soils. The samples were collected at sites previously chosen using as reference the pedological map of Goiania, trying to distribute them to all soil units of this map. The surveys were performed to a depth of 2 m in each hole the soils were mixed, representing what occurs in practice during the operation of a loan area. The samples collected for the study were those who had only fine soil grains with diameters of less than 2 mm (sieve nº. 10). Tests were also carried out conventional characterization (particle size, Atterberg limits and specific gravity) of the samples collected to better identify these soils. The results obtained with all samples have the intention to form a database for future research in the area of pavement. It was found that in Goiania most soils are lateritic clay and can be applied in the construction of paviments with low traffic volume.
Este trabalho tem por objetivo o cadastro geotécnico de áreas no Município de Goiânia-GO,que apresentem a ocorrência de solos finos lateríticos com potencialidade para serem utilizados em pavimentação. A metodologia utilizada se baseia no trabalho concebido por Nogami e Villibor (1995). A partir de sondagens e coletas de 17 amostras no campo foram realizados ensaios da Metodologia MCT (Mini-MCV, Perda de Massa por Imersão, Compactação e Mini-CBR) e verificadas as propriedades mecânicas e hidráulicas desses solos. As amostras foram coletadas em locais previamente escolhidos utilizando-se como referência o mapa pedológico de Goiânia, procurando distribuí-las em todas unidades de solos deste mapa. As sondagens foram executadas até a profundidade de 2 m e em cada furo os solos foram misturados, representando o que ocorre na prática durante a exploração de uma área de empréstimo. As amostras coletadas para o estudo foram somente aquelas constituídas por solos finos com diâmetros dos grãos inferiores a 2 mm (peneira nº 10). Também foram realizados ensaios convencionais de caracterização (granulometria, limites de consistência e peso específico) das amostras coletadas para melhor identificação desses solos. Os resultados obtidos de todas as amostras objetivaram formar um banco de dados para pesquisas futuras na área de pavimentação. Verificou-se que em Goiânia a maioria dos solos estudados são lateríticos argilosos e podem ser aplicados na construção de pavimentos com baixo volume de tráfego.
APA, Harvard, Vancouver, ISO, and other styles
3

Garambois, Pierre. "Modèles éléments-finis mixtes réduits pour l'optimisation en dynamique des structures." Thesis, Ecully, Ecole centrale de Lyon, 2015. http://www.theses.fr/2015ECDL0036/document.

Full text
Abstract:
L’utilisation de structures fines est croissante dans bon nombre d’industries. En ce sens, leur représentation mécanique et optimisation est un enjeu majeur de la recherche actuelle. De façon classique, l’optimisation s’effectue avec un critère de contrainte, obtenue à partir d’une modélisation éléments-finis en déplacements. L’idée de ces travaux est de construire un modèle éléments-finis mixte déplacements-contraintes et de développer des méthodes de réduction adaptées, de façon à améliorer l’efficacité des méthodes d’optimisation existantes. On construit d’une part deux modèles élément-finis mixtes déplacements-contraintes généralisées, pour des analyses dynamiques de structures “plaque” fines et épaisses. Ces derniers présentent l’avantage de donner des résultats identiques aux modèles classiques en déplacements, avec un meilleur temps de reconstruction des champs de contraintes. Cependant, ils s’avèrent être délicats pour plusieurs raisons : la taille des matrices associées, la difficulté de faire une analyse modale rapide, et un temps d’assemblage accru. C’est la raison pour laquelle nous développons par la suite des méthodes de sous-structuration et de double synthèse modale spécifiquement dédiées aux modèles mixtes. L’idée est d’utiliser des bases modales tirées du modèle équivalent en déplacements pour composer une nouvelle base mixte réduite. Dix méthodes sont implémentées, basées sur des modes encastrés, libres et de branche, parmi lesquelles certaines s’avèrent très efficaces pour réduire le nombre de degrés de liberté du système mixte, sans passer par ses modes propres. Enfin, nous intégrons les modèles mixtes sous-structurés sous forme de super- éléments mixtes dans un algorithme génétique, dans le but de mener une optimisation multi-objectif de structures “plaque” académiques sous chargement dynamique, avec critères de contrainte et paramètres d’épaisseur. Les modèles précédemment définis sont ainsi paramétrés en épaisseur, et ne nécessitent plus d’être ré-assemblés pour chaque configuration. Nous disposons désormais d’un modèle mixte “plaque”, qui conserve les avantages d’un accès direct aux contraintes, tout en étant affranchi de sa taille importante par le biais des méthodes de réduction, et de son assemblage grâce au paramétrage. Il en résulte des modèles mécaniques originaux et efficaces, permettant de réduire les coûts de calcul des algorithmes d’optimisation classiques. Ce type de méthode, couplé à de puissants algorithmes génétiques, permet d’avoir une bonne vue d’ensemble des solutions optimales, et laissent augurer des perspectives intéressantes pour une utilisation industrielle
The use of thin structures is increasing in many industries. Their mechanical representation and optimization is therefore a major challenge in modern research. Usually, the optimization is done with a stress criterion which is determined through displacements finite-element model. The idea of this work is to build a mixed displacements-stresses finite-element model and to develop adapted reduction procedures, in order to improve the efficiency of existing optimization methods. On the one hand, we build two mixed displacements-generalized stresses finite element models, for thin and thick dynamic plate structures analysis. They afford the advantage of giving identical results as classical displacements models with a better computational time to re-build the stress fields. Nevertheless, they turn out to be tricky for some reasons : the bigger matrices size, the difficulty of modal analysis and an assembling time higher. That is the reason why we develop afterwards some sub-structuring methods and double modal synthesis specifically dedicated to mixed models. The idea is to use modal basis taken from the equivalent displacement model so as to build a new mixed reduced basis. Ten methods are implemented, based on fixed modes, free modes, and branch modes. Some of them turn out to be very efficient to drastically reduce the amount of degrees of freedom of the mixed model, without using its eigenmodes. Finally, we embed the sub-structured mixed model in the form of Mixed Super- Element in a genetic algorithm, with the aim of conducting a multi-objective optimization of academic plate structures under dynamic loads, with stresses criterion and thicknesses parameters. The models previously defined are configured with thicknesses as parameters, and therefore don’t need to be re-assembled for each configuration. We now dispose of a powerful thickness-parametrized mixed reduced plate finite element model : it keeps the advantages of an easy access to the stresses and is free of its important size thanks to the reduction method and of its assembling thanks to the parametrization. The result is an original and efficient mechanical model that reduces the computational cost of classical optimization algorithms. That type of model, coupled with powerful genetic algorithms, permits a global optimization with a good overview of the solutions and promises interesting perspectives for industrial uses
APA, Harvard, Vancouver, ISO, and other styles
4

Gabrielii, Sofie. "Tänk om ingen annan finns som jag finns?" Thesis, Mittuniversitetet, Avdelningen för humaniora, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-33150.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Ospina, Vargas Luis Alejandro. "Prise en compte de milieux fins dans la méthode des éléments finis pour la modélisation en contrôle non-destructif par courants de Foucault." Paris 11, 2010. http://www.theses.fr/2010PA112127.

Full text
Abstract:
Le contrôle non destructif (CND) par courants de Foucault (CF) est l'une des principales techniques lorsqu'il s'agit du contrôle de pièces métalliques. Cette technique a une bonne sensibilité pour la détection de défauts et pour la mesure de paramètres constitutifs (conductivité, épaisseur, etc. ). Cependant, la mesure peut être affectée par différents paramètres influents. Il est donc utile de recourir à des modèles plus ou moins complexes afin de déterminer, de façon précise, le comportement d'une sonde à CF et de le caractériser en fonction des différents changements constitutifs ou géométriques de la pièce sous contrôle. Les travaux présentés dans cette thèse traitent de la modélisation du CND par CF avec la méthode des éléments finis (MEF). La MEF est bien adaptée aux problèmes avec des géométries complexes. Cependant, si le maillage est réalisé avec des éléments simpliciaux, il pourra être difficile de trouver un maillage approprié s'il existe des zones minces. Afin de surmonter ces inconvénients, un type d'élément, appelé élément coque, est appliqué à la modélisation du CND par CF avec de régions de faible épaisseur (ex : lift-off, bobines plates). Différentes analyses ont été effectuées afin d'évaluer les performances des éléments coques. Deux formulations duales (magnétique et électrique) ont été implantées. Deux exemples ont été validés : la modélisation du lift-off et celle de bobines circulaires plates. L'utilisation d'un maillage avec des éléments coques pour le traitement des problèmes comprenant des régions minces a montré une réduction du nombre d'itérations nécessaires à l'inversion du système d'équations. Les différentes applications mises en œuvre participent à l'élargissement des applications des éléments coques dans la modélisation électromagnétique
The eddy current non destructive testing is a widely used technique for the analysis of metallic parts. This technique has a good sensibility for the detection of cracks and the measure of constitutive parameters (conductivity, thickness, etc. . ). However, these measures can be affected by different parameters. Thus, it is useful to make models more or less complex that can determine, in a precise way, the behaviour of an eddy current sensor and characterize the responses in function of the constitutive or geometrical piece parameters. The works presented in this doctoral thesis are about modelling of eddy current sensor in non destructive testing applications with the finite element method (FEM). The FEM is well adapted to problems with complex geometries. However, if the mesh is constructed with simplicial elements, to find an acceptable mesh if thin zones are presented in the problem geometry should be difficult. A kind of finite element, called “shell element”, is introduced to solve these problems and applied to model eddy current sensors with geometries that contain thin regions. Different analyses are used in order to evaluate the performances of shell elements. Two dual formulations (magnetic and electric) are implemented. Two examples are evaluated: the lift-off model and a planar coil model. The use of different mesh with shell elements was shown a reduction in the number of iterations needed to find the matrix inverse. The applications developed enlarge the shell element applications in the field of electromagnetic modelling
APA, Harvard, Vancouver, ISO, and other styles
6

Johansson, Anneli. "Internetmäklare - finns de?" Thesis, University of Gävle, Department of Business Administration and Economics, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-687.

Full text
Abstract:

Syfte: På dagens fastighetsmäklarbransch finns det olika aktörer och samtliga säljare ställs inför ett val då de ska sälja sin bostad, sälja själv, genom en kontorsmäklare eller genom en Internetmäklare. Mitt syfte med uppsatsen är att öka kunskapen om Internetmäklare och dess förhållande till kontorsmäklare. För att kunna uppnå syftet har jag arbetat utifrån frågeställningen på vilket sätt kontorsmäklarens tjänst skiljer sig från Internetmäklarens tjänst.

Metod: För att besvara min frågeställning har jag valt att arbeta utifrån en hermeneutiskt utgångspunkt. Genom att utföra 4 personliga intervjuer samt 30 telefonintervjuer har jag kunnat skapa en bild av hur marknaden ser ut idag. Hur allmänheten ser på situationen har jag kunnat få fram genom att genomföra en enkätundersökning med frågor kring en potentiell bostadsförsäljning. Den teori jag valt att behandla i studien berör tjänsteutveckling samt konkurrensstrategier. Resultaten från dessa intervjuer samt enkätundersökningen har redovisats i löpande text för att sedan vävas samman med teoridelen i ett avslutande analys kapitel.

Resultat & slutsats: I dagsläget finns det en okunskap hos allmänheten kring Internetmäklare samt vad de har att erbjuda. Kontorsmäklarna har inte accepterat Internetmäklarnas position på marknaden och lever efter tron att Internetmäklare endast tar från självsäljarna och att de inte utgör ett direkt hot. Internetmäklarna i sin tur ser sig som ett komplement till kontorsmäklarna och anser att det är viktigt att arbeta tillsammans för att inta en accepterad position på marknaden. Internetmäklare är här för att stanna men behöver stärka sin position på marknaden och bli accepterade av allmänheten samt sina konkurrenter.

Förslag till fortsatt forskning: Att titta närmare på hur Internetmäklarna på bästa sätt kan ta sig in på marknaden. En mer grundlig undersökning av dessa företag skulle bidra till att marknaden på ett bättre sätt skulle kunna acceptera Internetmäklare som ett alternativ. Att om några år studera utvecklingen för Internetmäklarna är ett annat förslag.

Uppsatsens bidrag: Uppsatsen bidrar till att informera om att det finns andra aktörer på marknaden än kontorsdrivna fastighetsmäklarföretag. Det visar nyexaminerade att mäklare att det finns olika former av fastighetsmäklare samt att det går att arbeta på olika sätt. Främst bidrar uppsatsen till att understryka att ett tjänsteföretag aldrig slutar att utvecklas.

APA, Harvard, Vancouver, ISO, and other styles
7

Olsson, Olof. "Finns det svängrum?" Thesis, Stockholm University, The Stockholm Institute of Education, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:su:diva-7705.

Full text
Abstract:

Utgångspunkten för den här uppsatsen var en fråga om vilket svängrum det finns för elever med invandrarbakgrund för att välja förhållningssätt till sin etniska bakgrund i skolan. Finns det utrymme för dem som vill uttrycka en etnisk identitet och använda sig av kunskaper och erfarenheter i skolarbetet som den etniska bakgrunden gett dem? Kan de som inte vill använda sig av sin etniska bakgrund i skolarbetet låta bli, eller förväntas de vara representanter för sina föräldrars hemländer? Med syftet att undersöka hur elever med invandrarbakgrund upplever och tänker kring sin etniska bakgrunds betydelse i skolarbetet, intervjuades fem elever i år 9 på Bergabyskolan och fyra elever i årskurs 1 på Ringlunda gymnasium. Under bearbetningen av materialet gjordes en jämförelse mellan Bergabyskolan, som är en invandrartät skola med en uttalad ambition att vara en plats där olika kulturer ska kunna mötas och uttryckas, och Ringlunda gymnasium som har en mindre andel elever med invandrarbakgrund. Resultatet visade att flertalet informanter var intresserade av att använda sig av sin etniska bakgrund i skolarbetet. En del av informanterna redogjorde för hur de redan gjorde detta och andra, som inte gjorde det i någon större utsträckning, uttryckte att de starkt skulle uppskatta om de uppmuntrades till detta av sina lärare. Ingen av informanterna vittnade om att de känt sig tvingade att representera sina föräldrars hemländer i skolan. Skolorna i undersökningen skilde sig åt genom att informanterna från Ringlunda gymnasium föreföll att se svenskhet som mer eftertraktat, i mindre utsträckning uttryckte stolthet över sitt etniska ursprung, hade svårare att ge exempel på tillfällen då de haft nytta av sin etniska bakgrund i skolan samt tycktes uppleva sig som mindre respekterade av sina lärare än informanterna Bergabyskolan. I analysen av resultatet anges Bergabyskolans ambition att vara en mötesplats för olika kulturer som en tänkbar orsak till skillnaden mellan skolorna. Att andelen med invandrarbakgrund är högre bland såväl lärare som elever på Bergabyskolan lyfts också fram som tänkbara faktorer till skillnaderna skolorna emellan.

APA, Harvard, Vancouver, ISO, and other styles
8

Englund, Camilla, and Niklas Brandt-Holmström. "Olyckskorpen - finns han?" Thesis, KTH, Byggvetenskap, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-96606.

Full text
Abstract:
Detta examensarbete utreder frågeställningen om den såkallade "olyckskorpen" – alltså yrkesarbetaren som är inblandad i flertalet arbetsplatsolyckor – verkligen existerar. Frågan är lite av kontroversiell typ och har diskuterats sedan 1940-talet, utan något avsevärt utslag eller dokumenterat alster. Samarbetspartner blev NCC Construction och två av deras stora arbetsplatser i Stockholmsområdet valdes som mätfält; Söderby samt Frösunda. Undersökningen baserades på datainhämtning genom enkätformular till yrkesarbetare och ledning på de utvalda arbetsplatserna, genom erfarenhetsinhämtning från platschefer och lagbasar inom NCCs organisation samt från YTH-studenter på byggprogrammet. Författarnas egen erfarenhet från branschen har också vägts in i bearbetningen. Resultatet gav ingen olyckskorp att sätta fingret på, men en indikation från samtliga håll att egenskaper som kan knytas till olyckskorpen förekommer i branschen. Detta gav upphov till en teoretisk modell att användas för att ringa in olyckskorpar på individuell nivå i en vidare undersökning.
This diploma work investigates the issue about the so called " wearer of mishap" – if the construction worker that is involved in a large number of workplace accidents - actually exists. The question is of controversial type and has been discussed in Sweden since the 1940s, without any considerable rash or documented products. Collaborative partner became NCC Construction and two of their big workplaces in the Stockholm area were chosen; Söderby and Frösunda. The survey was based on questionnaire forms to construction workers and management on the selected workplaces, interviews with construction site managers and foremen within NCCs organisation and from YTH-students on the construction programme. The authors' own experience from the sector has also been weighed into the processing. The result gave no actual "wearer of mishap", but indications from all directions that attributes that can be linked to the "wearer of mishap" occurs in the sector. This gives us a chance to a theoretical mock-up to be used in order to locate a "wearer of mishap" on individual level in a further survey.
APA, Harvard, Vancouver, ISO, and other styles
9

Borg, Tommy, Anton Andersson, and Christoffer Urborn. "Var finns kvinnorna?" Thesis, Mittuniversitetet, Avdelningen för medie- och kommunikationsvetenskap, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-22091.

Full text
Abstract:
I den här uppsatsen gör Anton Andersson, Christoffer Urborn och Tommy Borg under sin andratermin på Journalistprogrammet en kvantitativ analys av könsfördelningen i Sundsvalls Tidning ochDagbladet. I undersökningen analyserades både text och bild i en veckas upplagor av bådatidningarna under våren 2014. Analysen omfattar endast tidningarnas egna material och inköptaartiklar. Material inskickat av läsare eller företagsannonser ingår inte i undersökningen.!Studien visar att tidningarnas namnomnämningar i text domineras av det manliga könet, endast varfjärde namn som fanns att läsa var ett kvinnligt. I bildsättningen var könsfördelningen mer jämn,men även där är männen överrepresenterade. Sportdelen sticker ut som den minst jämställda delendär endast var tionde person som omnämns är kvinna, medan förstasidan och de allmänna nyheternahåller en relativt jämn fördelning.
APA, Harvard, Vancouver, ISO, and other styles
10

Andersson, Caroline, and Jenny Ekberg. "Vardagsmatematiken : finns den?" Thesis, Högskolan i Borås, Institutionen för Pedagogik, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-19294.

Full text
Abstract:
BAKGRUND:Vi är intresserade av, och kommer i detta arbete att undersöka, om vardagsmatematikförekommer som en naturlig del i förskolan och grundskolans verksamhet. Vardagsmatematikär den matematik som inte sker genom undervisningen i skolan, utan den vi stöter på i vårtvardagliga liv. Det vi vill undersöka är om pedagogerna kopplar ihop matematiken medbarnens erfarenhetsvärld i förskolans verksamhet, och i skolans undervisning.SYFTE:Vårt syfte är att ta reda på om matematik används i förskolans och skolans vardag, samt omresultatet visar på en skillnad mellan förskola och skola?METODVi valde att genomföra vår undersökning genom observationer av pedagoger i förskola ochskola. Detta på grund av att vi ansåg att observationer på bästa sätt kan besvara vårt syfte.RESULTAT:När vi genomfört vår undersökning såg vi att den vardagliga matematiken förekom både iförskola och i skola. Vi såg att pedagogerna får in matematiken iverksamheten/undervisningen på ett naturligt sätt för barnen samtidigt som de knyter an tillbarnens egna erfarenheter.
Uppsatsnivå: C
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "FINCS"

1

Finch. London: Corvus, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Finks. New York: Dramatists Play Service, 2013.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Janis, Gay Scheuer. Finis. Franklin, OH: Eldridge Pub., 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Just for Fins: Fins #3. New York: Katherine Tegen Books, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Fins are Forever: Fins #2. New York: Katherine Tegen Books, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Forgive My Fins: Fins #1. New York: Katherine Tegen Books, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Forgive my Fins: Fins #1. Dorking, Surrey: Templar, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Just for Fins: Fins #3. Dorking: Templar Publishing, 2013.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Fins. Chambéry: Comp'act, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Baby finds. Northwood: Tamarind, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "FINCS"

1

Wolkersdorfer, Christian. "Finis." In Reinigungsverfahren für Grubenwasser, 273–74. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. http://dx.doi.org/10.1007/978-3-662-61721-2_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Gooch, Jan W. "Fines." In Encyclopedic Dictionary of Polymers, 305. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_4954.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Killian, Jeremy. "Finis." In Eugene O'Neill's Philosophy of Difficult Theatre, 153–64. London: Routledge, 2022. http://dx.doi.org/10.4324/9781003055693-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Brooks, Alasdair. "Finch, Jonathan." In Encyclopedia of Global Archaeology, 4227–29. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-30018-0_1387.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Chianese, Angelo. "Fines Removal." In Industrial Crystallization Process Monitoring and Control, 175–84. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2012. http://dx.doi.org/10.1002/9783527645206.ch15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

"Fines." In Elgar Encyclopedia of Crime and Criminal Justice. Edward Elgar Publishing, 2023. http://dx.doi.org/10.4337/9781789902990.fines.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

"fines." In Dictionary Geotechnical Engineering/Wörterbuch GeoTechnik, 523. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-41714-6_60953.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

"Finis." In Seventy Years of Exploration in Oceanography, 99–102. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-12087-9_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

KOSTER, R. "Finis." In The Budget Book for Film and Television, 323. Elsevier, 2004. http://dx.doi.org/10.1016/b978-0-240-80620-4.50057-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

"Fines." In Encyclopedic Dictionary of Polymers, 407. New York, NY: Springer New York, 2007. http://dx.doi.org/10.1007/978-0-387-30160-0_4871.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "FINCS"

1

Serra, Gleyciane Almeida, Daniel Jardim Almeida, Antonio Carlos Rodrigues Guimarães, and Maria Esther Soares Marques. "ESTUDO DO COMPORTAMENTO MECÂNICO DE SOLOS FINOS DA ILHA DO MARANHÃO PARA FINS DE PAVIMENTAÇÃO." In Congresso Brasileiro de Mecânica dos Solos e Engenharia Geotécnica. ABMS, 2020. http://dx.doi.org/10.4322/cobramseg.2022.0611.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Razelos, P., and S. Das. "Optimization of Arrays of Rectangular Longitudinal Fins and Circular or Elliptical Cross-Section Spines." In ASME 2010 International Mechanical Engineering Congress and Exposition. ASMEDC, 2010. http://dx.doi.org/10.1115/imece2010-40057.

Full text
Abstract:
The purpose of this study is to illustrate a method for obtaining the thermal performance and optimum dimensions of arrays consisting of rectangular longitudinal fins, cylindrical and elliptical cross-section spines. Since the majority of fin problems in an array have constant boundary temperatures, our endeavor is focused on the analysis and optimization of these types of fins. The temperature distribution, heat released to the environment, and the fins’ optimum dimensions in the array have been determined. Our analysis is based on a new set of dimensionless parameters, which are more suitable than those frequently used in fin analyses in the available literature. The effects of the boundary temperature ratio on the temperature variation in the fin have been examined and the results are shown graphically. Three salient results are derived regarding the thermal characteristics of these types of fins. They are: (1) the fin’s heat dissipation is expressed exactly with the same expression which describes the optimum heat dissipated by a fin with insulated tip, having half the fin’s dimensionless height. (2) The optimum fins’ dimensionless height and thickness are identical with those obtained for a fin with adiabatic tip of twice the dimensionless height (3) The optimum semi-axes ratio of elliptical-cross section spines is uniquely defined. In addition, it is shown that this approach can be successfully applied to solve problems in several practical applications, including pin fins having elliptic-cross sections. Two examples serve to illustrate the usefulness of our method.
APA, Harvard, Vancouver, ISO, and other styles
3

Das, S., and P. Razelos. "Analysis and Optimization of Rectangular Longitudinal and Circular Pin Fins With Space Variable Heat Transfer Coefficient." In ASME 2009 International Mechanical Engineering Congress and Exposition. ASMEDC, 2009. http://dx.doi.org/10.1115/imece2009-10788.

Full text
Abstract:
Extended surfaces, referred in the literature as fins, are usually metallic strips of different shapes and forms. These fins are attached to a primary surface of a structure, for the specific purpose of enhancing the heat transfer between the surface and the surrounding ambient fluid. For the last sixty three years, fins have attracted considerable attention and a vast literature exists on this subject. The aim of this study is to portray the analysis and optimization of rectangular longitudinal and pin fins of cylindrical cross sections. For this purpose a new method of analyzing fins is briefly discussed. Herein, specifically we examine the analysis and optimization of longitudinal fins with linear, exponential and other forms of space variable heat transfer coefficients taken from the existing literature. For pin fins, we examine the case where the heat transfer coefficient depends on the pin fin’s diameter. The results from the optimization process are presented in a concise fashion with practical examples.
APA, Harvard, Vancouver, ISO, and other styles
4

Mendes, Marcelo R. N., Pedro Bizarro, and Paulo Marques. "FINCoS." In the ACM/SPEC international conference. New York, New York, USA: ACM Press, 2013. http://dx.doi.org/10.1145/2479871.2479941.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Razelos, Panagiotis. "Fundamental Concepts and an Innovating Approach for Extended Surface Heat Transfer." In ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-83057.

Full text
Abstract:
In this work we re-examine the main fin equation qf = ηfAfΔT, proposed by Gardner [1] that has been used for the last sixty years to determine the performance of fins. The fundamental concepts of extended surface heat transfer are introduced, and their mathematical expressions are derived. The vital role of fin effectiveness, a term also introduced by Gardner [1] is established. It is shown that the effectiveness is inextricably linked in proving the validity of the simplifying assumptions that most of the fins’ endeavors are based on. It is also shown that the common practice of using the efficiency to predict the fin’s performance leads to serious errors. A novel approach to fin analysis, based on a proposed transformation of coordinates, is presented, which can be employed to considerably simplify the pertinent differential equations and obtain more friendly expressions describing the fin’s performance. The heat dissipation is expressed in a non-dimensional form and for several practical cases polynomial expressions have developed, that will help students to engage in rudimentary fin designs. It is also shown that, the one-dimensional approach can be used to obtain solutions involving extended surfaces made from anisotropic material. Three examples serve to illustrate the usefulness of our method.
APA, Harvard, Vancouver, ISO, and other styles
6

Torii, Shuichi, and Wen-Jei Yang. "Thermal Transport Phenomena Over Slot-Perforated Flat Fins With Heat Sink in Forced Convection Environment." In ASME 2004 Heat Transfer/Fluids Engineering Summer Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/ht-fed2004-56028.

Full text
Abstract:
A theoretical study is performed to investigate unsteady thermal and fluid flow transport phenomena over flat fins with heat sink, which are placed in a forced convection environment. Emphasis is placed on the effects of Reynolds number and fin pitch on heat transfer performance and velocity and thermal fields. It is found from the study that (i) in the high Reynolds number region, the alternating changes in the fluid flow take place for larger fin pitch, (ii) the alternating flow in the space area between two fins is mutually interacted by the corresponding one from the adjacent in-line plate fines, resulting in an amplification of heat transfer performance, and (iii) heat-transfer performance is intensified with a decrease in the fin pitch, whose trend becomes larger in the higher Reynolds number region considered here.
APA, Harvard, Vancouver, ISO, and other styles
7

Cunningham, James, Jim Davis, Kyle Tarplee, and Juan Vasquez. "S-FINCH: An Optimized Streaming Adaptation to FINCH Clustering." In 2022 26th International Conference on Pattern Recognition (ICPR). IEEE, 2022. http://dx.doi.org/10.1109/icpr56361.2022.9956513.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Torii, Shuichi, Wen-Jei Yang, and Naoko Iino. "Thermal Fluid Flow Transport Phenomenon Over Vertical Slot-Perforated Flat Fins With Heat Sink in Natural Convection Environment." In ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-79634.

Full text
Abstract:
A theoretical study is performed to investigate unsteady thermal and fluid flow transport phenomena over vertical slot-perforated flat fins with heat sink, which are placed in a natural convection environment. Emphasis is placed on the effects of Rayleigh number and fin pitch on heat transfer performance and velocity and thermal fields. It is found from the study that (i) in the high Rayleigh number region, the alternating changes in the fluid flow take place for larger fin pitch, (ii) the alternating flow in the space area between two fins is mutually interacted by the corresponding one from the adjacent in-line plate fines, resulting in an amplification of heat transfer performance, and (iii) heat-transfer performance is intensified with an increase in the fin pitch, whose trend becomes larger in the higher Rayleigh number region considered here.
APA, Harvard, Vancouver, ISO, and other styles
9

Bozic, Caslav. "FINDS - Integrative services." In 2009 IEEE/ACS International Conference on Computer Systems and Applications. IEEE, 2009. http://dx.doi.org/10.1109/aiccsa.2009.5069302.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

"FINCoS 2013: Reviewers." In 2013 International Conference on Intelligent Networking and Collaborative Systems (INCoS). IEEE, 2013. http://dx.doi.org/10.1109/incos.2013.173.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "FINCS"

1

Hinterhuber, Veronica. Appendix - Lists of Finds. Verlag der Österreichischen Akademie der Wissenschaften, February 2020. http://dx.doi.org/10.1553/acrossborders2_appendix_list-of-finds.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Cropek, Donald M., and Brian Dankowski. Sonolysis of Nitrocellulose Fines. Fort Belvoir, VA: Defense Technical Information Center, May 2000. http://dx.doi.org/10.21236/ada377921.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kaplan, Lawrence. Foreign Policy Continuity: War Finds Us. Fort Belvoir, VA: Defense Technical Information Center, March 2010. http://dx.doi.org/10.21236/ada515803.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Price, J. T., D. Cameron, and P. Couturier. Potential of briquetting QIT rotary kiln fines. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1993. http://dx.doi.org/10.4095/304577.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Rudisill, T. S. Immobilization of Rocky Flats Graphite Fines Residue. Office of Scientific and Technical Information (OSTI), April 1999. http://dx.doi.org/10.2172/6002.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Rudisill, T. S. Immobilization of Rocky Flats Graphite Fines Residue. Office of Scientific and Technical Information (OSTI), April 1999. http://dx.doi.org/10.2172/6049081.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Piehl, Anne Morrison, and Geoffrey Williams. Institutional Requirements for Effective Imposition of Fines. Cambridge, MA: National Bureau of Economic Research, October 2010. http://dx.doi.org/10.3386/w16476.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Craig N. Eatough. Clean Production of Coke from Carbonaceous Fines. Office of Scientific and Technical Information (OSTI), November 2004. http://dx.doi.org/10.2172/1012550.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Choudhry, V. Recovery of coal fines from preparation plant effluents. Office of Scientific and Technical Information (OSTI), January 1991. http://dx.doi.org/10.2172/5917615.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

E. James Davis. ELECTROKINETIC DENSIFICATION OF COAL FINES IN WASTE PONDS. Office of Scientific and Technical Information (OSTI), December 1999. http://dx.doi.org/10.2172/766750.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'FINCS' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography