Academic literature on the topic 'Filter clogging'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Filter clogging.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Filter clogging":
Liu, Chunye, Rui Wang, Wene Wang, Xiaotao Hu, Wanying Wu, and Fulai Liu. "Different Irrigation Pressure and Filter on Emitter Clogging in Drip Phosphate Fertigation Systems." Water 14, no. 6 (March 9, 2022): 853. http://dx.doi.org/10.3390/w14060853.
Bang, Ki Woong, Jin Chul Joo, Jin Ho Kim, Eunbi Kang, Jongsoo Choi, Jung Min Lee, and Yonghyok Kim. "Application of Bottom Ash as Filter Media for Construction Site Runoff Control." Water 12, no. 4 (April 1, 2020): 990. http://dx.doi.org/10.3390/w12040990.
Wu, Zhengguang, Yanjuan Qi, Aihong Kang, Bo Li, and Xueling Xu. "Evaluation of Particulate Matter Capture and Long-Term Clogging Characteristics of Different Filter Media for Pavement Runoff Treatment." Advances in Materials Science and Engineering 2020 (August 27, 2020): 1–15. http://dx.doi.org/10.1155/2020/5012903.
Reddi, Lakshmi N., Ming Xiao, Malay G. Hajra, and In Mo Lee. "Physical clogging of soil filters under constant flow rate versus constant head." Canadian Geotechnical Journal 42, no. 3 (June 1, 2005): 804–11. http://dx.doi.org/10.1139/t05-018.
Lee, Byungsik. "Convolutional Neural Network Model for Estimating Clogging of Ash-Mixed Sand Filters." Journal of the Korean Society of Hazard Mitigation 21, no. 4 (August 31, 2021): 159–68. http://dx.doi.org/10.9798/kosham.2021.21.4.159.
Alimohammadi, Hossein, Kristina Vassiljeva, Eduard Petlenkov, Martin Thalfeldt, Alo Mikola, Tuule Mall Kull, and Ahmet Köse. "Gray Box Time Variant Clogging behaviour and Pressure Drop Prediction of the Air Filter in the HVAC System." E3S Web of Conferences 246 (2021): 10002. http://dx.doi.org/10.1051/e3sconf/202124610002.
Alavi Moghaddam, M. R., Y. Guan, H. Satoh, and T. Mino. "Filter clogging in coarse pore filtration activated sludge process under high MLSS concentration." Water Science and Technology 54, no. 10 (November 1, 2006): 55–66. http://dx.doi.org/10.2166/wst.2006.728.
Dalri, Alexandre B., Gilmar O. Santos, Geffson de F. Dantas, Rogério T. de Faria, José R. Zanini, and Luiz F. Palaretti. "Performance of drippers in two filtering systems using sewage treatment effluent." Revista Brasileira de Engenharia Agrícola e Ambiental 21, no. 6 (June 2017): 363–68. http://dx.doi.org/10.1590/1807-1929/agriambi.v21n6p363-368.
Shuraits, A. L., A. V. Birykov, and A. P. Usachev. "DEVELOPMENT OF A CALCULATION METHODFOR TWO-STAGE NATURAL GAS PURIFICATION PLANTS FROM MECHANICAL IMPURITIES." Russian Journal of Building Construction and Architecture, no. 1(49) (February 24, 2021): 54–65. http://dx.doi.org/10.36622/vstu.2021.49.1.005.
Valmari, Tuomas, Matti Lehtimäki, and Aimo Taipale. "Filter Clogging by Bimodal Aerosol." Aerosol Science and Technology 40, no. 4 (April 2006): 255–60. http://dx.doi.org/10.1080/02786820500543282.
Dissertations / Theses on the topic "Filter clogging":
Biswas, Sharbaree. "Study of cohesive soil-granular filter interaction incorporating critical hydraulic gradient and clogging." Access electronically, 2005. http://www.library.uow.edu.au/adt-NWU/public/adt-NWU20060221.100311/index.html.
Sliwinski, Kristoffer. "A Machine Learning Approach to Predictively Determine Filter Clogging in a Ballast Water Treatment System." Thesis, KTH, Skolan för industriell teknik och management (ITM), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-263931.
Sedan Ballast Water Management-konventionen introducerades har fartyg behövt använda barlastvattensystem för att behandla barlastvattnet i ett försök att hämma spridningen av bakterier och andra mikrober som kan vara farliga för främmande ecosystem. Ett sätt att förbehandla vattnet innan behandling är genom att låta det passera genom ett filter. När filtret samlar på sig partiklar börjar det att klogga och kan potentiellt klogga igen snabbt när koncentrationen av partiklar i vattnet är hög. Kloggning kan äventyra systemets säkerhet. Det här examensarbetet ämnar att undersöka om maskininlärning genom neurala nätvärk kan implementeras i systemet för att prediktivt bestämma filtrets kloggningsgrad genom att undersöka lämpligheten hos två populära nätverksstrukturer för tidsserieanalys. Problemet handlade initialt om att bedömma olika kloggningsgrader för filterelementet baserat på samplade sensordata från barlastvattensystemet. Datan kördes sedan för regressionsanalys genom två neurala nätverk, ett av typen LSTM och ett av typen CNN för att prediktivt bestämma paramterarna. LSTM-nätvärket uppskattade variabelvärden och kloggningsgrad för de kommande 5 sekundrarna medan CNN:et uppskattade variabelvärden och kloggningsgrad för de kommande 30 sekunderna. Den uppskattade datan verifierades sedan genom klassificering av ett LSTM nätverk och två CNN. LSTM nätverket för regression uppnådde ett r 2 -resultat på 0.981 och LSTM nätverket för klassificering uppnådde en klassificeringsgrad på 99.5%. CNN:et för regression uppn˚adde ett r 2 -resultat på 0.876 och CNN:et för klassificering uppnådde en klassificeringsgrad på 93.3%. Resultatet visar att ML kan användas för att identifiera olika kloggningsgrad men ytterligare forskning krävs för att bestämma om alla kloggningsstadier kan klassificeras.
Andersson, Karolina. "Igensättning av långsamfilter i Östby vattenverk i Kramfors : studie av påverkande faktorer." Thesis, Uppsala University, Department of Earth Sciences, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-9281.
Östby waterworks in the community of Kramfors has since 2003 had problems of fast clogging of the slow sand filters. As the clogging appears more often, they must be cleaned more frequently which has made the drinking water preparation difficult. Wintertime it has sometimes been impossible to clean the filters which has led to their closing and this has influenced the water quality negatively.
The waterworks is a surface waterworks which takes its raw water from the lake Sjöbysjön. The water is flocculated and filtered in a contact filter with the flocculent EKOFLOCK 91. Thereafter it is alkalinized before it reaches the outdoors placed slow sand filters. After the filters the water is alkalinized and disinfected before it reaches the customers.
This thesis work has looked into which factors influence the clogging and trials have been made in order to optimize the waterworks and thereby reduce the clogging. The raw water has been studied with aspect to biology and chemistry, the filtered water has been studied with aspect to chemistry and also the pressures in the slow sand filters have been studied.
The colour of the raw water from Sjöbysjön and its catchment area has increased since the beginning of the 90-ies and also the bio volume has increased in the lake.
The contents of aluminium before the slow sand filters are far higher than the contents after, which leads to the conclusion that aluminium is accumulated in the filters. The differential pressure over the sand bed increases with time after a cleaning. This indicates an accumulation of particles which increases with the load. Observations of the filter surface before cleaning showed that it was covered by a brown, jelly-like film. The internal resistance in the filter beds increases successively after a cleaning and one month after cleaning it is highest in the upper part of the sand bed. All this points to that flocculated aluminium is gathered in the slow sand filters, on the surface, causing clogging.
While the thesis work has been going on a process of alkalinizing before the contact filters has been reengaged and this has influenced the flocking of organic materials. When raising the pH the dose of flocculent was increased and this combined increased the amount of flocculated material. The contact filters could not bear this increased amount of flock load but showed instead a breakthrough.
In a few lab scale trials the flocking pH was varied as well as the dose flocculent to the raw water and after this the water was filtrated. A tendency was seen that the separation of aluminium, colour and turbidity increased with increasing pH and dose flocculent. At the pH 6.2 and the chemical dose of 60 g/m3 the content of aluminium, the colour and the turbidity showed the lowest values in the filtrate.
Vattenverket i Östby, Kramfors kommun, har sedan 2003 haft problem med för snabba igensättningar i långsamfiltren. Ju oftare de sätter igen desto mer frekvent måste de rensas vilket har försvårat dricksvattenberedningen. Vintertid har rensningar ibland inte kunnat utföras och långsamfiltren har därför stängts av vilket har påverkat vattenkvaliteten negativt.
Verket är ett ytvattenverk som tar sitt råvatten från Sjöbysjön. Vattnet flockas och filtreras i kontaktfilter med fällningskemikalien EKOFLOCK 91. Därefter mellanalkaliniseras det innan det går till de utomhus placerade långsamfiltren. Efter långsamfiltren efteralkaliniseras och desinficeras det innan det når konsumenterna.
I detta examensarbete har faktorer som påverkar igensättningarna undersökts och försök har också gjorts för att optimera driften och därmed minska igensättningarna. Råvattnet har undersökts avseende dess biologi och kemi, filtraten i verken har undersökts med avseende på deras kemi och tryckbildningar i långsamfiltren har studerats.
Färgtalet i råvattentäkten Sjöbysjön och dess tillrinningsområde har ökat sedan början av 90- talet och dessutom har biovolymen i sjön ökat.
Halterna aluminium före långsamfiltren är mycket högre än halterna efter, vilket antyder att aluminium ansamlas i filtren. Differentialtrycket över sandbädden ökar med tiden efter en rensning. Detta tyder på en ansamling av partiklar som ökar med belastningen. Observationer av filterytan innan rensning visade att den täcktes av en brun geléaktig hinna. Motståndet i filtren ökar successivt efter en rensning och är en månad efter rensning störst i den övre delen av sandbädden. Allt detta pekar på att aluminiumflock ansamlas i långsamfiltren, på ytan, och orsakar igensättningarna.
Under examensarbetets gång har en föralkalinisering återinförts i vattenverkets process och den har påverkat fällningen av det organiska materialet. Då pH höjts har också dosen fällningskemikalie ökats vilket har ökat mängden flock. Denna ökade flockmängd har kontaktfiltren inte kunnat bära utan istället släppt igenom.
I några försök i labbskala varierades fällnings-pH och dos fällningskemikalie till råvatten med en efterföljande filtrering. Tendenser som kunde ses var att avskiljningen av aluminium, färg och turbiditet ökade med ökat pH och ökad dos fällningskemikalie. Vid pH 6,2 och kemikaliedos på 60 g/m3 var aluminiumhalterna, färgen och turbiditeten som minst i filtratet.
Mitchell, Ged. "An investigation into the factors affecting the behaviour of Highway Filter Drains, with a particular emphasis on the Scottish Trunk Road Network." Thesis, Abertay University, 2017. https://rke.abertay.ac.uk/en/studentTheses/768779b0-366a-434d-a28d-e9313885d37b.
Pinto, Marinaldo Ferreira. "Desenvolvimento e avaliação de um sistema de filtragem com reversão de fluxo de alta frequência." Universidade de São Paulo, 2013. http://www.teses.usp.br/teses/disponiveis/11/11143/tde-12072013-082758/.
Emitters clogging have been a barrier to trickle irrigation. Just a few studies have been performed concerning equipments which assist in preventing emitters clogging in recent years, especially regarding to development equipment. Studies carried out on this issue are usually linked to the characterization of systems in use. The aim of this study was to develop a filtering system with automatic flow reversal of high frequency. The system is designed to operate with low quality water, with reverse flow and automatic cleanings and with minimum volume of water to perform the cleaning. Decisions by the controller of the filtration system are based on head loss, obtained by pressure transducers installed at the upstream and downstream of the system. The final prototype consists of three screen filters and eleven electronically controlled solenoid valves. The curve of head loss was determined as a function of water flow, retention efficiency and minimum volume of water required for cleaning the filters. The efficiency in particle retention was determined following a completely randomized experimental design in a factorial scheme in which three factors were tested: reversal time (15 and 30 s) increase in head loss (25 and 50%) and solids concentration (500 and 1000 mg L-1). The total solids retention efficiency was 71.7 and 78.3% for concentrations of 500 and 1000 mg L-1, respectively, presenting a significant difference at 1%. However, when analyzing the retention efficiency of solids larger than 50 ?m (Ed> 50), none of the treatments was significant at 1%, whose efficiency was 98.6 ± 0.7%. The mean volume of water expended during the cleaning was 5.39 L. It represented a volume of water for cleaning per volume of filtered water from 8.0 and 12.6 L m-3, to concentrations of 500 and 1000 mg L-1, respectively. The energy efficiency values of filtering system ranged from 80 to 90% considering flow rate of 2 m3 h-1 and inlet pressure ranging from 15 to 40 mca. The filtering system cleaning was not totally effective in reestablishing the head loss, with an upward trend over time. The reverse flow with frequency of 11.11 and 22.22 mHz influenced the head loss evolution of the filtration system, making it slower than the trend for the system running without flow reversal. The developed filtration system has potential for filtering low quality irrigation water, but it requires periodic maintenance to clean the filter element. The allowable head loss of the filter system should be the most restrictive value between the criterion of particle retention performance and the flow variation of the irrigation system because of the increase in head loss in the filters.
Boudhan, Rachid. "Performance of pulse-jet bag filter regarding particle removal for nano-waste incineration conditions." Thesis, Ecole nationale supérieure Mines-Télécom Atlantique Bretagne Pays de la Loire, 2017. http://www.theses.fr/2017IMTA0022/document.
Filtration performance of a pulse-jet bag filter was evaluated at the laboratory-scale regarding submicronic particles with a nanosized fraction during clogging/unclogging cycles. The particle size distribution was representative to those encountered at the outlet of a nano-waste incineration device at laboratory-scale. The bag filter was operated in conditions as similar as possible to those found in flue gas treatment of waste incineration plants, in terms of temperature, humidity, filtration velocity, injection of sorbent reagents and unclogging conditions. The air flow and the bag filter were heated to 150°C, the water content was maintained in the air flow in the range of 10-12% (3% of relative humidity RH), and filtration velocity throughout the bag filter was fixed at 1.9 cm.s⁻¹. A mixture of submicronic suspended particles of activated carbon and sodium bicarbonate, both used in flue gas treatment systems mainly for the removal of dioxins/furans and acid gases, was generated simultaneously with the aerosol representative of combustion emissions.The study focused on the filtration performance at the beginning of the bag filter’s lifetime filter for the 11 first clogging-unclogging cycles before stabilizing the residual pressure drop reached after pulse-jet unclogging. The maximum pressure drop was set at 150 Pa for all filtration cycles. Once the maximum pressure drop was reached, the filter was unclogged using the pulse-jet system. The performance of the bag filter was evaluated in terms of the evolution of pressure drop, fractional and total particle collection efficiencies, during the clogging/unclogging cycles.Moreover, an experimental and theoretical study was carried out on the influence of different parameters on the filtration performance of bag filter and flat filter, such as influence of humidity (3% RH versus 0% RH at 150°C), temperature (150°C versus 24°C), filtration velocity (1.9 cm.s⁻¹ versus 1.4 cm.s⁻¹) and the influence of the injection of sorbent reagents.The main results of this study are: (i) high collection efficiency of the bag filter in representative conditions of flue gas treatment of waste incineration: minimun particle collection efficiency of 98.5% for particle diameter of 74 ± 15 nm (electrical mobility diameter), (ii) influence of residual particle cake at the beginning of the filtration cycles on the bag filter performance, (iii) significant influence of humidity on the porosity of the particle cake due to the capillary condensation of water between the particles in presence of humidity (150°C - 3% RH i.e. almost 100 g of water per kg of dry air). Faster increase of bag filter pressure drop in presence of humidiy (150°C - 3% RH) as compared to the dry conditions (150°C - 0% RH)
Gervais, Pierre-Colin. "Études expérimentale et numérique du colmatage de filtre plissé." Thesis, Université de Lorraine, 2013. http://www.theses.fr/2013LORR0007/document.
Pleated filters are widely used in air treatments because of the advantageous effective surface to overall dimension ratio they offer. Their major drawback though resides in their reduced lifetime which still needs to be controlled. Indeed, when clogging, the pressure drop considerably increases, the filtration flow is then no longer maintained which might lead to the deterioration of the media. It is then crucial to characterize the evolution of the pressure drop under operating conditions in order to best design these equipments. Part of our work consisted in studying how the operating conditions influence the geometry of the deposit. To do so, we used Single-Photon Emission Computed Tomography (SPECT), a non-destructive imaging technique that keeps intact the particle structuring. The visualization of aerosol deposit at the beginning of the filtration process allows observing preferential particle deposition on the whole height of the pleat. A numerical approach was used to study the permeability of bimodal fibrous media and we experimentally studied the local velocity as well as the biphasic flow inside pleated filter media. Comparison between experiments and simulations allowed us to validate the Geodict code for a wide range of media properties and velocities. Regarding bimodal fibrous media, the fast data acquisition has allowed testing several existing models which resulted in classifying them in a unique way. If the experimental results on the initial deposition in pleated filters are encouraging, those related to beforehand clogging point to several improvements regarding the technique we used
Japuntich, Daniel A. "Clogging of fibrous filters with monodisperse aerosols." Thesis, Loughborough University, 1991. https://dspace.lboro.ac.uk/2134/7132.
Le, Maout-Alvarez Coralie. "Étude expérimentale des effets chimiques sur le colmatage des filtres dans l’industrie nucléaire." Electronic Thesis or Diss., Université de Lorraine, 2023. http://docnum.univ-lorraine.fr/ulprive/DDOC_T_2023_0015_ALVAREZ.pdf.
During a LOCA accident (Loss Of Coolant Accident) occurring to a nuclear Pressurized Water Reactor (PWR), debris are generated and can be partially transported to the RIS-EAS filter in the sumps located in the bottom of the nuclear reactor containment. These debris can contribute to the « physical » clogging of the filters. Another effect called « chemical effects » corresponds to the presence of cations in solution resulting from the debris' corrosion and the possible corrosion of the metal surface present in the reactor containment vessel. In the case of a severe accident with core fuel meltdown, additional loads debris are to be considered as presence of particles formed of structural materials, control rod material, fission products and concrete particles resulting from corium-concrete interaction. To ensure the long term liquid recirculation functionality, the chemical effect have to be understood: nature of these chemical effects, conditioning parameters and potential effect on the clogging. The thesis aims at studying the chemical effects after designing a dedicated experimental loop: a parametric approach , coupled with several chemical and pressure drop measurements. Chemical speciation in solution and precipitate characterizations will/can be respectively performed by ICP and MEB-EDX, DRX and XPS techniques
Grippari, Florence. "Caractérisation et filtration des aérosols nonastructurés : application aux fumées de projection thermique des métaux." Thesis, Université de Lorraine, 2012. http://www.theses.fr/2012LORR0158/document.
This study deals with the filtration of metallic particles contained in the metallization fumes. Experience feedback specific to the filtration of metallization fumes by dust collectors report a rapid clogging of filters and the inefficiency of pneumatic cleaning techniques commonly used. This leads to a high reduction in filters lifetime. The objective of this study is characterize clogging then unclogging in order to improve the performance of dust cartridge filter against metallization fumes. Three research axes were explored on a dedicated bench : - Metallization fumes characterization. It allows describing the spatial structure of the particle by the fractal dimension and the dynamic shape factor with the DMA-ELPI serial coupling and thanks to an original data analysis methodology validated on various aerosols. The characteristics obtained explain the clogging properties of metallization fumes. - Characterization of the cake generated during the filtration phase (or clogging). It shows a incompressible structure in the velocities filtration range of industry. The experimental porosity of the cake formed by filtering metallization fumes is estimated thanks to these studies. - Study on cleaning. It describes and explains the inefficiency of pneumatic cleaning techniques employed in industry. It appears that only a very small surface of the pleated media is unclogged. The precoating alternative is shown to be very efficient provided that it is combined with off-line cleaning procedures
Books on the topic "Filter clogging":
Koerner, Robert M. Landfill leachate clogging of geotextile (and soil) filters: Project summary. Cincinnati, OH: U.S. Environmental Protection Agency, Risk Reduction Engineering Laboratory, 1991.
McKnight, Suzanne Jane. The potential causes of clogging of geotextile filters in landfill sites. [London]: Queen Mary and Westfield College, 1992.
Koerner, Robert M. Leachate clogging assessment of geotextile and soil landfill filters: Project summary. Cincinnati, Ohio: National Risk Management Research Laboratory, Office of Research and Development, U.S. Environmental Protection Agency, 1995.
Japuntich, Daniel A. Clogging of fibrous filters with monodisperse aerosols. 1991.
Book chapters on the topic "Filter clogging":
Dudczig, Steffen, Enrico Storti, and Christos G. Aneziris. "Registration of Filtration Efficiency of Active or Reactive Filters in Contact with Steel Melt in a Steel Casting Simulator." In Multifunctional Ceramic Filter Systems for Metal Melt Filtration, 489–517. Cham: Springer International Publishing, 2024. http://dx.doi.org/10.1007/978-3-031-40930-1_19.
Wetzig, Tony, Andreas Baaske, Sven Karrasch, Steffen Dudczig, and Christos G. Aneziris. "Cleanness of Molten Steel—Active and Reactive, Exchangeable Filter Systems for the Continuous Casting of Steel." In Multifunctional Ceramic Filter Systems for Metal Melt Filtration, 741–68. Cham: Springer International Publishing, 2024. http://dx.doi.org/10.1007/978-3-031-40930-1_29.
Hu, Junlong, Yao Xie, Jing Wang, and Deyong Wang. "Anti-clogging performance of coconut fiber filter of drainage body in vacuum preloading." In Urban Construction and Management Engineering IV, 372–78. London: CRC Press, 2024. http://dx.doi.org/10.1201/9781032626444-48.
Kandra, Harpreet Singh, David McCarthy, and Ana Deletic. "Review of clogging processes in stormwater treatment filters." In Sustainable Civil Engineering, 247–79. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003368335-15.
Yaşar, Fevzi. "Biodiesel Production from Algae Oil." In Algal Biotechnology for Fuel Applications, 59–72. BENTHAM SCIENCE PUBLISHERS, 2022. http://dx.doi.org/10.2174/9789815051001122060006.
"piggeries increased. In that time limits to farm size were seldom determined by farm waste disposal and air polution. At present there are local regions where is a surplus of slurry. Due to the low value as a fertilizer transport to other regions is too expensive and in some cases over manuring will exceed. Separation of slurry offers the possibility of obtaining solid manure with a high fertilizer value and a liquid with a low value. On this way it becomes more worthwhile to transport the solid manure over longer distances, So it reduces over manuring. However slurry separation with a high efficiency is costly about £4,-/pigplace by adding flocculants and expensive complicated separations (1). Underslat slurry storage also influences environnement as well inside as outside the piggery because gases are released from the slurry. On the other hand anaerobic digestion processes will be avoid by daily removal and separate storage of faeces and urine. That factors were for IMAG a motive to develop a reliable combined manure filter and removal system for piggeries. 2. SEPARATION EFFICIENCY In a preliminary investigation the separation efficiency of different separation techniques under slatted floors was defined. Separation efficiency means which part of the total components in faeces and urine remains in the faeces. This research was carried out in a pen with 8 pigs. The pigs were given wet feed without drinkwaterprovisions. In Fig.l the separation result is mentioned for a filter net of meshsize 0.78x0.78 mm. From Fig.l it is apparent that about 35% of the total faeces and urine is removed as a solid and that about 90% of the total dry matter is in the faeces. Also for a number of minerals, p2°5’ Ca(^ » and Cu> amounts to more than 90%. Nitrogen and potassium were separated in smaller amounts, about 60% and 40% respectively, being retained in the solid. On basis of this result and after comparative research with concern for filtering, clogging and cleaning the above mentioned filternet is now being used for the final mechanized filter and removal system. 3* THE MECHANIZED FILTER INSTALLATION A combined filter and manure system must be completely reliable, since it is not easy to make repairs under “the slats.v After 2-3 years of experience a system which works well has been developed.(2,3,4) In Fig.2 a schematic diagram of the filter system is shown under the slatted floor. In the channel under the slats two angle sections (1) are attached one above the other and fixed over the whole length to both walls. These are covered from above with protective plates (2) joined underneath the slats. The filter net (3) is provided with." In Odour Prevention and Control of Organic Sludge and Livestock Farming, 228–31. CRC Press, 1986. http://dx.doi.org/10.1201/9781482286311-91.
Conference papers on the topic "Filter clogging":
Bonne, Samuel, and Nicolas Arnault. "Oil Filter Clogging Rule - Correlation between Mileage and Lab Test Clogging." In SAE 2012 International Powertrains, Fuels & Lubricants Meeting. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2012. http://dx.doi.org/10.4271/2012-01-1754.
Youssef, Alilou, Bourrous Soleiman, Thomas Dominique, Bardin-Monnier Nathalie, Nérisson Philippe, and Gélain Thomas. "Experimental Characterization of Airflow Within a Clean HEPA Filter Used for the Containment of Radioactive Contamination in Nuclear Facilities." In 2016 24th International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/icone24-60901.
Ono, Takuya, Koji Watanabe, Shinsuke Tashiro, Yuki Amano, and Hitoshi Abe. "HEPA Filter Clogging and Volatile Material Release Under Solvent Fire Accident in Fuel Reprocessing Facility." In 2017 25th International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/icone25-67626.
Gupta, Rohit Dev, Paolo Sironi, and Luca Della Chisea. "Remote Diagnostics of Air-Filter Clogging in a Network Equipment." In 2021 20th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (iTherm). IEEE, 2021. http://dx.doi.org/10.1109/itherm51669.2021.9503243.
Greenlee, Alison, Timothy Murray, Victor Lesniewski, Mark Jeunnette, and Amos G. Winter. "Design and Testing of a Low-Cost and Low-Maintenance Drip Irrigation Filtration System for Micro-Irrigation in Developing Countries." In ASME 2014 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/detc2014-35351.
Yamano, Hidemasa, Hiroyuki Nishino, Kenichi Kurisaka, Yasushi Okano, Takaaki Sakai, Takahiro Yamamoto, Yoshihiro Ishizuka, et al. "Development of Risk Assessment Methodology of Decay Heat Removal Function Against Natural External Hazards for Sodium-Cooled Fast Reactors: Project Overview and Volcanic PRA Methodology." In 2016 24th International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/icone24-60023.
Elrahmani, Ahmed, and Riyadh I. Al-Raoush. "The Dependent Clogging Dynamics and Its Impact on Porous Media Permeability Reduction." In The 2nd International Conference on Civil Infrastructure and Construction. Qatar University Press, 2023. http://dx.doi.org/10.29117/cic.2023.0152.
Vishal, S. Randive, Katkar Omkar Prataprao, Nashte Adarsh Pravin, and A. Rammohan. "Investigation of effect of air filter clogging on performance and emissions from engine." In 2017 International conference on Microelectronic Devices, Circuits and Systems (ICMDCS). IEEE, 2017. http://dx.doi.org/10.1109/icmdcs.2017.8211699.
Cowart, Jim, Patrick Moore, Harrison Yosten, Leonard Hamilton, and Dianne Luning Prak. "Diesel Engine Acoustic Emission Airflow Clogging Diagnostics With Machine Learning." In ASME 2018 Internal Combustion Engine Division Fall Technical Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/icef2018-9601.
Yamada, Naohiro, Seiichi Nakano, Yusuke Koike, Rika Suzuki, Sachiko Okuda, and Shozaburo Konishi. "Low Ash SP/GF-6 Fuel Eco Gasoline Engine Oil." In 2023 JSAE/SAE Powertrains, Energy and Lubricants International Meeting. 10-2 Gobancho, Chiyoda-ku, Tokyo, Japan: Society of Automotive Engineers of Japan, 2023. http://dx.doi.org/10.4271/2023-32-0036.
Reports on the topic "Filter clogging":
Tien, Chi. Summary of studies on filter clogging. Office of Scientific and Technical Information (OSTI), September 1993. http://dx.doi.org/10.2172/10108339.
Ito, Atsushi, Tsubasa Ishii, Hideaki Ando, Fujio Umebayashi, and Keita Kinoshita. Research on Clogging Mechanism of Multilayered Fuel Filters and Extension of Filter Life Span in Ethanol Blended Fuel. Warrendale, PA: SAE International, November 2011. http://dx.doi.org/10.4271/2011-32-0570.