Relevant bibliographies by topics / Fibre-reinforced composites

Academic literature on the topic 'Fibre-reinforced composites'

Author: Grafiati
Published: 4 June 2021
Last updated: 20 February 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Fibre-reinforced composites.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Fibre-reinforced composites"

1

Vedanarayanan, V., B. S. Praveen Kumar, M. S. Karuna, A. Jayanthi, K. V. Pradeep Kumar, A. Radha, G. Ramkumar, and David Christopher. "Experimental Investigation on Mechanical Behaviour of Kevlar and Ramie Fibre Reinforced Epoxy Composites." Journal of Nanomaterials 2022 (February 2, 2022): 1–10. http://dx.doi.org/10.1155/2022/8802222.

Full text
Abstract:
Natural fibre composites have been replacing synthetic fibre composites in practical applications for the last several years because of the features such as low densities, low weight, relatively inexpensive, recyclability, and excellent mechanical qualities unique to the substance. Thus, the current study examines how Kevlar/Ramie/Nano SiC hybrid fibre reinforced composites are made and their mechanical properties, and it compares them to those made using a single natural fibre reinforced composite. It was found that natural fibre composite densities and hardness were all within acceptable ranges by performing composites’ tensile and flexural strength tests. The hand-lay-up technique used ASTM standards samples to construct the composite specimens with various fibre weight percentages. Increase in mechanical characteristics was achieved by adding the glass and the epoxy fibres into the epoxy matrix. The hybrid composite’s performance is promising, especially those of individual fibre-reinforced composites.
APA, Harvard, Vancouver, ISO, and other styles
2

Hernandez-Estrada, Albert, Jörg Müssig, and Mark Hughes. "The impact of fibre processing on the mechanical properties of epoxy matrix composites and wood-based particleboard reinforced with hemp (Cannabis sativa L.) fibre." Journal of Materials Science 57, no. 3 (January 2022): 1738–54. http://dx.doi.org/10.1007/s10853-021-06629-z.

Full text
Abstract:
AbstractThis work investigated the impact that the processing of hemp (C. sativa L.) fibre has on the mechanical properties of unidirectional fibre-reinforced epoxy resin composites loaded in axial tension, and particleboard reinforced with aligned fibre bundles applied to one surface of the panel. For this purpose, mechanically processed (decorticated) and un-processed hemp fibre bundles, obtained from retted and un-retted hemp stems, were utilised. The results clearly show the impact of fibre reinforcement in both materials. Epoxy composites reinforced with processed hemp exhibited 3.3 times greater tensile strength when compared to the un-reinforced polymer, while for the particleboards, the bending strength obtained in those reinforced with processed hemp was 1.7 times greater than the un-reinforced particleboards. Moreover, whether the fibre bundles were processed or un-processed also affected the mechanical performance, especially in the epoxy composites. For example, the un-processed fibre-reinforced epoxy composites exhibited 49% greater work of fracture than the composites reinforced with processed hemp. In the wood-based particleboards, however, the difference was not significant. Additionally, observations of the fracture zone of the specimens showed different failure characteristics depending on whether the composites were reinforced with processed or un-processed hemp. Both epoxy composites and wood-based particleboards reinforced with un-processed hemp exhibited fibre reinforcement apparently able to retain structural integrity after the composite’s failure. On the other hand, when processed hemp was used as reinforcement, fibre bundles showed a clear cut across the specimen, with the fibre-reinforcement mainly failing at the composite's fracture zone.
APA, Harvard, Vancouver, ISO, and other styles
3

Methven, J. M. "Fibre reinforced composites." Materials & Design 11, no. 5 (October 1990): 276–77. http://dx.doi.org/10.1016/0261-3069(90)90214-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kaya, Figen. "Damage Detection in Fibre Reinforced Ceramic and Metal Matrix Composites by Acoustic Emission." Key Engineering Materials 434-435 (March 2010): 57–60. http://dx.doi.org/10.4028/www.scientific.net/kem.434-435.57.

Full text
Abstract:
In this work damage micro-mechanisms of two different types of fibre reinforced composites are investigated by acoustic emission, AE. Ceramic based oxide fibre reinforced mullite matrix composite and metallic based SiC fibre reinforced titanium matrix composites exhibit different fracture mechanisms during loading and AE technique could pinpoint these damage mechanisms based on the AE responses detected simultaneously. The results show that in a ceramic matrix composite, the identification of fibre fracture and matrix cracking requires careful analysis of the AE data as both fibres and matrix break in brittle manner. Whereas the separation of fibre fracture from the ductile tearing of matrix ligaments could be easier in metallic based composites, such as titanium matrix composites.
APA, Harvard, Vancouver, ISO, and other styles
5

Abbas, Al-Ghazali Noor, Farah Nora Aznieta Abdul Aziz, Khalina Abdan, Noor Azline Mohd Nasir, and Mohd Nurazzi Norizan. "Kenaf Fibre Reinforced Cementitious Composites." Fibers 10, no. 1 (January 4, 2022): 3. http://dx.doi.org/10.3390/fib10010003.

Full text
Abstract:
Increased environmental awareness and the demand for sustainable materials have promoted the use of more renewable and eco-friendly resources like natural fibre as reinforcement in the building industry. Among various types of natural fibres, kenaf has been widely planted in the past few years, however, it hasn’t been extensively used as a construction material. Kenaf bast fibre is a high tensile strength fibre, lightweight and cost-effective, offering a potential alternative for reinforcement in construction applications. To encourage its use, it’s essential to understand how kenaf fibre’s properties affect the performance of cement-based composites. Hence, the effects of KF on the properties of cementitious composites in the fresh and hardened states have been discussed. The current state-of-art of Kenaf Fibre Reinforced Cement Composite (KFRCC) and its different applications are presented for the reader to explore. This review confirmed the improvement of tensile and flexural strengths of cementitious composites with the inclusion of the appropriate content and length of kenaf fibres. However, more studies are necessary to understand the overall impact of kenaf fibres on the compressive strength and durability properties of cementitious composites.
APA, Harvard, Vancouver, ISO, and other styles
6

P, Balaji. "An Experimental Investigation of Glass Fibre with Prosopis Juliflora as Reinforced Polymer Composites." International Journal for Research in Applied Science and Engineering Technology 10, no. 2 (February 28, 2022): 638–43. http://dx.doi.org/10.22214/ijraset.2022.40331.

Full text
Abstract:
Abstract: The main objective of this project is to investigate the mechanical properties of glass fibre reinforced with prosopis juliflora ash as reinforced polymer composite .(Glass fibre + Prosopis Juliflora ash) Composite is fabricated by adding prosopis julifora ash powder of 10% weight of glass fibre. In this research, fibre reinforced polymer were prepared with glass fibre and prosopis juliflora ash of glass fibre thickness 4-5mm. The resins used in this study are epoxy. The resins were synthesized at 10:1 fibre-resin weight percentages. The prepared composites were tested under ASTM standards to study the mechanical properties of the FRP composites such as Tensile strength, Flexural strength and Impact strength. Keywords: Glass fibre, prosopis juliflora, ASTM standards, epoxy resin, composite material.
APA, Harvard, Vancouver, ISO, and other styles
7

Adekomaya, O., and K. Adama. "GLASS-FIBRE REINFORCED COMPOSITES: THE EFFECT OF FIBRE LOADING AND ORIENTATION ON TENSILE AND IMPACT STRENGTH." Nigerian Journal of Technology 36, no. 3 (June 30, 2017): 782–87. http://dx.doi.org/10.4314/njt.v36i3.17.

Full text
Abstract:
The primary objective of this research work is to analyse the effect of fibre loading and orientation on the tensile and impact strength of the polymeric composite materials. Fibre reinforced composite materials have been reported to have attracted many applications in view of its low weight and superior strength when compared with the metal matrix composite. While researches have established the weight reduction of fibre reinforced polymer material, few works have reported the impact of orientation on the manufacturing of polymer composite. In this study, series of experimental works were done to demonstrate the manufacturing of glass-fibre reinforced epoxy resin with special attention on the influence of oriented reinforced composite material. The composites were manufactured using hand-lay technique with three different fibre loadings (10, 20, and 30 wt. %) and at two different fibre orientations (30o and 60o). Key of the finding drawn from this research form the basis of discussion and, composite with 60o fibre orientation showed better tensile strength when compared with the neat resin and other oriented (G10E30) fibre reinforced composite. Similar observations were also noticed on the impact strength of these composites which signify the improved mechanical properties of oriented reinforced composite materials. http://dx.doi.org/10.4314/njt.v36i3.17
APA, Harvard, Vancouver, ISO, and other styles
8

Xu, Xin, Sheng Yin Song, Yong Gang Liu, and Yao Rong Feng. "Optimal Design of Sisal Fibre Reinforced Resin Matrix Composite." Advanced Materials Research 284-286 (July 2011): 444–49. http://dx.doi.org/10.4028/www.scientific.net/amr.284-286.444.

Full text
Abstract:
Using a friction-abrasion testing machine with a constant speed, the friction and wear properties of sisal fibre reinforced resin composites containing different sisal fibre contents at a series of friction temperatures were investigated, and its tribology mechanisms were discussed. The results shown that the friction and wear properties of sisal fibre reinforced composites reach the optimum value when the mass ratio of resin to sisal fibre is 3/4. To compare with asbestos fibre, mineral fibre and steel fibre, the optimized sisal fibre reinforced composite has the best stability of friction coefficient with a low wear rate at different friction temperatures. The sisal is an ideal substitute of asbestos for resin matrix frictional composite.
APA, Harvard, Vancouver, ISO, and other styles
9

Yeomans, J. A. "Fibre reinforced ceramix composites." Composites 23, no. 5 (September 1992): 373. http://dx.doi.org/10.1016/0010-4361(92)90337-t.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Thompson, A. "Fibre Reinforced Composites 1986." Materials & Design 8, no. 3 (May 1987): 182. http://dx.doi.org/10.1016/s0261-3069(87)90378-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Fibre-reinforced composites"

1

Bisanda, Elifis T. N. "Sisal fibre reinforced composites." Thesis, University of Bath, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.278675.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Farooq, Mohammed. "Development of FRP based composite fibre for fibre reinforced cementitious composites." Thesis, University of British Columbia, 2016. http://hdl.handle.net/2429/57668.

Full text
Abstract:
This thesis describes a method of development of a novel fibre based on fibre reinforced polymers (FRP), for use fibre reinforcement in concrete. Thermosetting epoxy resin matrix were reinforced with E-glass, S-glass, and Carbon fibre to produce different types of composite fibres. The FRP panels were produced using the Vacuum Infusion technique, and then cut to different fibre sizes. The volume fractions of reinforcements within the FRP fibre were controlled by using woven and unidirectional fabrics. The number of layers of reinforcing fibres were also changed, to obtain the optimal thickness of the fibres. The FRP material was characterized by means of tensile tests and microscope image analysis. Four different compositions of FRP were produced with tensile strengths ranging from 195 MPa to 950 MPa. The different combinations in geometry broadened the total number of fibres investigated to 12. Single fibre pullout tests were performed to obtain the fundamental fibre-matrix interfacial bond parameters for the different FRP fibres. The FRP fibres, being hydrophilic, along with having a unique rough surface texture, showed a good bond with cement matrix. A bond strength superior to industrially available straight steel fibres and crimped polypropylene fibres has been observed. The 3 best fibres were then chosen to examine the flexural behaviour FRP fibre reinforced concrete beams. The optimized FRP fibres, one each of Glass FRP and Carbon FRP were then further investigated to study the effect of matrix maturity, temperature, fibre inclination, and loading rate on the fibre-matrix interfacial behaviour using single fibre pullout tests. Scanning Electron Microscope (SEM) analysis was carried out to identify the effect of above-mentioned factors on the surface characteristics of the fibre. An attempt was also made to optimize the fibre-matrix interface to achieve an optimized failure mechanism by coating the fibre with oil. The ability of the fibre to transfer stresses across a cracked section over extended periods has been investigated by means of fibre-relaxation tests. Finally, to assess durability, the fibres were conditioned at high pH and high temperature after which single fibre pullout, direct tension tests, & SEM analysis were conducted.
Applied Science, Faculty of
Civil Engineering, Department of
Graduate
APA, Harvard, Vancouver, ISO, and other styles
3

Shawkataly, Abdul Khalil H. P. "Acetylated plant fibre reinforced composites." Thesis, Bangor University, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.267327.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Ho, Christopher Sui-keung. "Mesostructure quantification of fibre-reinforced composites." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape3/PQDD_0017/MQ49722.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Dyer, S. J. R. "Elastic anisotropy in fibre reinforced composites." Thesis, University of Leeds, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.373548.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Wooldridge, Andrew. "Fibre reinforced composites via coaxial electrospinning." Thesis, University of Warwick, 2016. http://wrap.warwick.ac.uk/95272/.

Full text
Abstract:
This study shows that an all-thermoplastic (nano- or micro-fibre) polymer can be created using coaxial electrospinning to create fibre mats akin to pre-impregnated fabric, which can be formed into a composite without the addition of other materials. This has not yet been accomplished by using the coaxial electrospinning production process. Experimentation to investigate the maximum fibre volume ratio found that these composites were successfully formed at 0.73 fibre volume fraction, which is higher than the maximum found in traditionally formed composites (0.60 – 0.70). The formation of the composite from the fibre mats was investigated, and found that the composites formed at the lowest temperature and pressure (70 °C and 1 bar) exhibited the higher tensile strength, up to 84 % higher than at other temperatures and pressures. Higher pressure and temperature caused deformation in the reinforcing fibres, resulting in lower tensile strength. The composites were shown to have more consistent Young’s modulus and higher tensile strength compared to a composite made from the same materials, but with the fibres and matrix materials produced separately, and combined during the composite forming procedure. The finalised composite produced in this research exhibited an average Young’s Modulus of 2.5 GPa, ultimate tensile strength of 33.2 MPa, and elongation at break of 3.8 %.
APA, Harvard, Vancouver, ISO, and other styles
7

Jia, Weiwei. "Polylactic acid fibre reinforced biodegradable composites." Thesis, University of Manchester, 2015. https://www.research.manchester.ac.uk/portal/en/theses/polylactic-acid-fibre-reinforced-biodegradable-composites(732904c8-584b-4fbb-b68a-3cf14dc84e9f).html.

Full text
Abstract:
Polylactic acid (PLA) is a well-known biodegradable and sustainable polymer, derived from renewable agricultural sources. Its high price in the past limited its applications to mainly biomedical materials such as bone fixation devices. As the growth of awareness in global environment protection and sustainable development, PLA has attracted increased attention and development. Nowadays, the applications of PLA have been broadened into plastics, textiles and composites etc. Composites have been widely used in industrial applications for several decades, due to their high strength-to-weight ratio and good structural properties. However, most traditional composite materials are composed of two distinct fossil fuel based components. They are not eco-friendly and are difficult to recycle. This study aims at the development of PLA biodegradable composites and the optimisation of the processing parameters to achieve the best mechanical properties of PLA self-reinforced composites (PLA-SRC) for various end-uses. A variety of polymer analytical techniques were used to evaluate crystallinity, thermal properties, and chemical structures of the PLA reinforcement and matrix. Further study was carried out to assess the effects on mechanical properties of PLA-SRC caused by the processing temperature, pressure and holding time. The composites produced at high temperature and/or high pressure have significantly better matrix penetration (fibre wetting), which enhances mechanical properties. However, holding time was found to have no significant effect on the properties of PLA-SRC.
APA, Harvard, Vancouver, ISO, and other styles
8

McCombe, Greg. "Fibre Reinforced Composites with Integrated Electromagnetic Functionality." Thesis, University of Bristol, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.525467.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Moukhomodiarov, Rinat R. "Asymptotic models for incompressible fibre-reinforced composites." Thesis, University of Salford, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.402110.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Shyha, Islam Saad Elsayed Mohamed. "Drilling of carbon fibre reinforced plastic composites." Thesis, University of Birmingham, 2010. http://etheses.bham.ac.uk//id/eprint/1353/.

Full text
Abstract:
Following an extensive literature survey focusing on the machinability of carbon fibre reinforced plastics (CFRP), three main phases of experimental work were undertaken to evaluate the drilling of CFRP and associated stack materials. Phase 1 and 2 involved small diameter holes (1.5 mm) in thin CFRP laminates (3 mm thick) while Phase 3 addressed the feasibility of one-shot drilling (6.35 mm diameter holes) in multilayer workpiece stacks comprising titanium, CFRP and aluminium. Machinability was assessed in terms of tool life/wear, force/torque, hole size and geometrical accuracy, workpiece surface integrity and chip morphology.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Fibre-reinforced composites"

1

Goh, Kheng Lim. Discontinuous-Fibre Reinforced Composites. London: Springer London, 2017. http://dx.doi.org/10.1007/978-1-4471-7305-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Sidney, Mindess, ed. Fibre reinforced cementitious composites. London: Elsevier Applied Science, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Sidney, Mindess, ed. Fibre reinforced cementitious composites. 2nd ed. London: Taylor & Francis, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

M, Haddad Y., and North Atlantic Treaty Organization. Scientific Affairs Division., eds. Advanced multilayered and fibre-reinforced composites. Dordrecht: Kluwer Academic, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Ho, Christopher Sui-keung. Mesostructure quantification of fibre-reinforced composites. Ottawa: National Library of Canada, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Sultan, Mohamed Thariq Hameed Sultan, Murugan Rajesh, and Kandasamy Jayakrishna. Failure of Fibre-Reinforced Polymer Composites. Boca Raton: CRC Press, 2021. http://dx.doi.org/10.1201/9781003128861.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Haddad, Y. M., ed. Advanced Multilayered and Fibre-Reinforced Composites. Dordrecht: Springer Netherlands, 1998. http://dx.doi.org/10.1007/978-94-007-0868-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Haddad, Y. M. Advanced Multilayered and Fibre-Reinforced Composites. Dordrecht: Springer Netherlands, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

North Atlantic Treaty Organization. Advisory Group for Aerospace Research and Development. Characterisation of fibre reinforced titanium matrix composites. Neuilly sur Seine, France: AGRD, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

North Atlantic Treaty Organization. Advisory Group for Aerospace Research and Development. Characterisation of fibre reinforced titanium matrix composites. Neuilly sur Seine, France: AGARD, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Fibre-reinforced composites"

1

Hall, Wayne, and Zia Javanbakht. "Fibre-Reinforced Composites." In Advanced Structured Materials, 1–12. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-78807-0_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Wang, Ben, and Hang Gao. "Fibre Reinforced Polymer Composites." In Advances in Machining of Composite Materials, 15–43. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-71438-3_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Correia, João Ramôa. "Fibre-Reinforced Polymer (FRP) Composites." In Materials for Construction and Civil Engineering, 501–56. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-08236-3_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Rand, B., and R. J. Zeng. "Fibre Reinforced Ceramic-Matrix Composites." In Carbon Fibers Filaments and Composites, 367–98. Dordrecht: Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-015-6847-0_16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Will, Peter, and Sonja Helbig. "Fracture of Fibre-Reinforced Composites." In MICC 90, 767–72. Dordrecht: Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-011-3676-1_140.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kumar, Garje C. Mohan, and Sabuj Mallik. "Natural Fibre-Reinforced Polymer Composites." In Failure of Fibre-Reinforced Polymer Composites, 1–11. Boca Raton: CRC Press, 2021. http://dx.doi.org/10.1201/9781003128861-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Goor, Gianpietro, Peter Sägesser, and Karl Berroth. "Electrically Conductive Ceramic Composites." In Advanced Multilayered and Fibre-Reinforced Composites, 311–22. Dordrecht: Springer Netherlands, 1998. http://dx.doi.org/10.1007/978-94-007-0868-6_20.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Jemioło, Stanislaw. "Constitutive Equations for Fibre-Reinforced Material." In Brittle Matrix Composites 3, 429–38. Dordrecht: Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-011-3646-4_46.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hu, Hong, Minglonghai Zhang, and Yanping Liu. "Auxetic fibre–reinforced composites." In Auxetic Textiles, 285–335. Elsevier, 2019. http://dx.doi.org/10.1016/b978-0-08-102211-5.00009-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Bagherpour, Salar. "Fibre Reinforced Polyester Composites." In Polyester. InTech, 2012. http://dx.doi.org/10.5772/48697.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Fibre-reinforced composites"

1

Schwarzova, Ivana, Nadezda Stevulova, and Tomas Melichar. "Hemp Fibre Reinforced Composites." In Environmental Engineering. VGTU Technika, 2017. http://dx.doi.org/10.3846/enviro.2017.044.

Full text
Abstract:
The conventional homogeneous materials can no longer effectively satisfy the growing demands on product capabilities and performance, due to the advancement in products design and materials engineering. Therefore, the fibre reinforced composites with better properties and desirable applications emerged. Natural fibres have high strength to low weight ratios and have good sound and thermal insulation properties. Combination of organic filler and inorganic matrix creates high-quality products such as fibre boards and composites. The great importance is attached to industrial hemp as source of the rapidly renewable fibres and as non-waste material. Industrial hemp fibre has great potential in composite materials reinforcement. However, improving interfacial bonding between fibres and matrix is an important factor for its using in composites. This paper deals with hemp fibre reinforced composites in civil engineering as component part of sustainable construction. Prepared lightweight composites based on original and pre-treated hemp hurds are characterized by selected physical and mechanical properties (density, thermal conductivity, water absorbability, compressive and tensile strength) in dependence on used inorganic binder (traditional Portland cement and alternative MgO-cement).
APA, Harvard, Vancouver, ISO, and other styles
2

Mentges, N., S. Mirkhalaf, and M. Fagerström. "Modelling the Effect of Fibre Length Distributions in Short Fibre Reinforced Composites." In VIII Conference on Mechanical Response of Composites. CIMNE, 2021. http://dx.doi.org/10.23967/composites.2021.122.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Scholz, Marc-S., Bruce W. Drinkwater, and Richard S. Trask. "Ultrasonic assembly of short fibre reinforced composites." In 2014 IEEE International Ultrasonics Symposium (IUS). IEEE, 2014. http://dx.doi.org/10.1109/ultsym.2014.0091.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

McCool, Raurí, Adrian Murphy, Ryan Wilson, Zhenyu Jiang, and Mark Price. "Thermoforming of Continuous Fibre Reinforced Thermoplastic Composites." In THE 14TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2011. AIP, 2011. http://dx.doi.org/10.1063/1.3589630.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Takagi, H., and Y. Hagiwara. "Fracture behaviour of natural fibre reinforced composites." In HPSM 2010. Southampton, UK: WIT Press, 2010. http://dx.doi.org/10.2495/hpsm100211.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

de Araujo Alves Lima, Rosemere, DANIEL KIOSHI CAVALCANTI, Jorge Neto, and DOINA BANEA. "CHARACTERIZATION OF NATURAL FIBRE REINFORCED HYBRID COMPOSITES." In X Congresso Nacional de Engenharia Mecânica. ABCM, 2018. http://dx.doi.org/10.26678/abcm.conem2018.con18-0215.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Etches, Julie, Ian Bond, and Philip Mellor. "Applications of magnetically active fibre reinforced composites." In Smart Structures and Materials, edited by William D. Armstrong. SPIE, 2005. http://dx.doi.org/10.1117/12.598769.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Vladimirov, Victor, and Ioan Bica. "MECHANICAL RECYCLING: SOLUTIONS FOR GLASS FIBRE REINFORCED COMPOSITES." In International Symposium "The Environment and the Industry". National Research and Development Institute for Industrial Ecology, 2017. http://dx.doi.org/10.21698/simi.2017.0020.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Chang, W. C., E. Harkin-Jones, M. Kearns, and M. McCourt. "Multilayered Glass Fibre-reinforced Composites In Rotational Moulding." In THE 14TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2011. AIP, 2011. http://dx.doi.org/10.1063/1.3589598.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Takagi, H., H. Mori, and M. Nakaoka. "Damping performance of bamboo fibre-reinforced green composites." In MATERIALS CHARACTERISATION 2015. Southampton, UK: WIT Press, 2015. http://dx.doi.org/10.2495/mc150221.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Fibre-reinforced composites"

1

Poole, M., and M. Gower. Mechanical Characterisation of 3D Fibre-Reinforced Plastic (FRP) Composites. National Physical Laboratory, May 2022. http://dx.doi.org/10.47120/npl.mgpg151.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Trask, Richard S., Mark Hazzard, and Tom Llewellyn-Jones. Additive Layer Manufacturing of Biologically Inspired Short Fibre Reinforced Composites. Fort Belvoir, VA: Defense Technical Information Center, March 2014. http://dx.doi.org/10.21236/ada606966.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Beaver, P. W. A Review of Multiaxial Fatigue and Fracture of Fibre-Reinforced Composites. Fort Belvoir, VA: Defense Technical Information Center, January 1987. http://dx.doi.org/10.21236/ada191990.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Salmeron Perez, N., R. M. Shaw, and M. R. L. Gower. Mechanical testing of fibre-reinforced polymer matrix composites at cryogenic temperatures (-165ºC). National Physical Laboratory, November 2022. http://dx.doi.org/10.47120/npl.mat112.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Dissanayake, N. Assessment of Data Quality in Life Cycle Inventory (LCI) for Fibre-reinforced Polymer (FRP) composites. National Physical Laboratory, August 2022. http://dx.doi.org/10.47120/npl.mat106.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Pemberton, R. G., D. Edser, and MRL Gower. Optimisation of acid digestion conditions for volume fraction measurements of hard to digest fibre-reinforced polymer composites. National Physical Laboratory, September 2020. http://dx.doi.org/10.47120/npl.mn12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Salmeron Perez, N., R. M. Shaw, and M. R. L. Gower. Mechanical testing of fibre-reinforced polymer matrix composites at cryogenic temperatures. Requirements for mechanical test capability at -269°C (4 K). National Physical Laboratory, June 2022. http://dx.doi.org/10.47120/npl.mat102.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Spetsieris, N., and D. Edser. Framework for dynamic uncertainty budget evolution for mode I fracture toughness measurements of fibre-reinforced plastic (FRP) composites: a user’s guide to uncertainty budget calculation tool. National Physical Laboratory, June 2022. http://dx.doi.org/10.47120/npl.mat104.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

REVIEW OF VARIOUS SHEAR CONNECTORS IN COMPOSITE STRUCTURES. The Hong Kong Institute of Steel Construction, December 2021. http://dx.doi.org/10.18057/ijasc.2021.17.4.8.

Full text
Abstract:
Shear connectors are devices that provide shear connection at the interface of steel girders and reinforced concrete slabs in composite structures to accomplish composite action in a flexure. The seismic response of composite structures can be controlled using properly designed shear connectors. This state-of-the-art review article presents considerable information about the distinct types of shear connectors employed in composite structures. Various types of shear connectors, their uniqueness and characteristics, testing methods and findings obtained during the last decade are reviewed. The literature, efficacy, and applicability of the different categories of shear connectors, for example, headed studs, perfobond ribs, fibre reinforced polymer perfobonds, channels, pipes, Hilti X-HVB, composite dowels, demountable bolted shear connectors, and shear connectors in composite column are thoroughly studied. The conclusions made provide a response to the flow of the use of shear connectors for their behaviours, strength, and stiffness to achieve composite action.
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Fibre-reinforced composites' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography