Academic literature on the topic 'Fibre'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Fibre.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Fibre"
Hasham, Md, V. Reddy Srinivasa, M. V. Seshagiri Rao, and S. Shrihari. "Flexural behaviour of basalt fibred concrete slabs made with basalt fibre reinforced polymer rebars." E3S Web of Conferences 309 (2021): 01055. http://dx.doi.org/10.1051/e3sconf/202130901055.
Full textParasakthibala, Ms G., and Mrs A. S. Monisha. "A Review on Natural Fibers; Its Properties and Application Over Synthetic Fibers." International Journal for Research in Applied Science and Engineering Technology 10, no. 8 (August 31, 2022): 1894–97. http://dx.doi.org/10.22214/ijraset.2022.46530.
Full textAmir, Norlaili, Faiz Ahmad, and Puteri S. M. Megat Yusoff. "Char Strength of Wool Fibre Reinforced Epoxy-Based Intumescent Coatings (FRIC)." Advanced Materials Research 626 (December 2012): 504–8. http://dx.doi.org/10.4028/www.scientific.net/amr.626.504.
Full textKatarpawar, Raghvendra. "Review on Strengthening the Characteristics of Concrete Using Oil Coated Coconut Fibre." International Journal for Research in Applied Science and Engineering Technology 9, no. VI (June 30, 2021): 3844–50. http://dx.doi.org/10.22214/ijraset.2021.35954.
Full textOrtega, Raquel, Mario D. Monzón, Zaida C. Ortega, and Eoin Cunningham. "Study and fire test of banana fibre reinforced composites with flame retardance properties." Open Chemistry 18, no. 1 (April 7, 2020): 275–86. http://dx.doi.org/10.1515/chem-2020-0025.
Full textGhazzawi, Yousof M., Andres F. Osorio, and Michael T. Heitzmann. "Fire performance of continuous glass fibre reinforced polycarbonate composites: The effect of fibre architecture on the fire properties of polycarbonate composites." Journal of Composite Materials 53, no. 12 (October 23, 2018): 1705–15. http://dx.doi.org/10.1177/0021998318808052.
Full textUwaremhevho Momodu, Daniel. "SURFACE FUNCTIONALIZATION OF LINEN FIBER AND ITS DYE-FASTNESS ASSESSMENT USING (4-[(E)-(4-AMINO-2-HYDROXYPHENYL) DIAZENYL] BENZENE- 1-SULPHONIC ACID AND 4-[(E)-(4-{(Z)-[4-(DIMETHYLAMINO) PHENYL] DIAZENYL}-2-HYDROXYPHENYL) DIAZENYL] BENZENE-1-SULPHONIC ACI." Suranaree Journal of Science and Technology 30, no. 3 (December 14, 2023): 030118(1–9). http://dx.doi.org/10.55766/sujst-2023-03-e03039.
Full textXiao, Jie, Han Shi, Lei Tao, Liangliang Qi, Wei Min, Hui Zhang, Muhuo Yu, and Zeyu Sun. "Effect of Fibres on the Failure Mechanism of Composite Tubes under Low-Velocity Impact." Materials 13, no. 18 (September 17, 2020): 4143. http://dx.doi.org/10.3390/ma13184143.
Full textMathew, Merin, Kamalakanth Shenoy, and Ravishankar K. S. "Evaluation of Porosity and Water Sorption in Conventionally Cured Modified Polymethyl Methacrylate Resin - An In Vitro Study." Journal of Evolution of Medical and Dental Sciences 10, no. 13 (March 29, 2021): 930–34. http://dx.doi.org/10.14260/jemds/2021/201.
Full textSchabowicz, Krzysztof, Tomasz Gorzelańczyk, and Mateusz Szymków. "Identification of the Degree of Degradation of Fibre-Cement Boards Exposed to Fire by Means of the Acoustic Emission Method and Artificial Neural Networks." Materials 12, no. 4 (February 21, 2019): 656. http://dx.doi.org/10.3390/ma12040656.
Full textDissertations / Theses on the topic "Fibre"
Goh, Kheng Lim. "Fibre reinforcement in fibre composite materials : effect of fibre shape." Thesis, University of Aberdeen, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.395069.
Full textDavid, Marie. "Optimisation de la dispersion des fibres pendant le cycle de malaxage des bétons industriels." Thesis, Paris Est, 2014. http://www.theses.fr/2014PEST1157/document.
Full textFibers are added to the concrete to give it news properties. The homogeneity of these characteristics is assured by a constant presence of fiber as the whole material. The dispersion of one species within another is governed by convection and/or diffusion mechanisms. Concerning objects having the size of steel fiber, these two phenomena are caused by the shearing applied to the material, an unknown and difficult to measure datum in the case of concrete mixer. To begin, a method allowing to estimate the mixer's shearing is suggested. This method is based on the measurement of the medium diameter of cement aggregates produced in the mixer. The link between the medium diameter and the mean shearing is established. In a second time, a mean to measure fiber dispersion from electrical resistivity measurements during the concrete mixing is presented. Then, in a third time, fiber dispersion are measured during mixing. The link between necessary time to obtain an homogeneous distribution and the mixer's shearing ability is established
Hyensjö, Marko. "On fibre suspension flow modelling : mechanical fibre flocculation and fibre orientation /." Stockholm, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-344.
Full textMartinez, Pinon F. "Characterizing single-mode fibres and single-mode fibre lenses." Thesis, University of Southampton, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.383403.
Full textHale, Zoe Miranda. "Fibre optic sensors using adiabatically tapered single mode fibres." Thesis, University of Cambridge, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.320155.
Full textLarsson, Per. "Dimensional Stability of Paper Influence of Fibre-Fibre Joints and Fibre Wall Oxidation." Licentiate thesis, KTH, Fibre and Polymer Technology, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-4635.
Full textPapper är ett mycket mångsidigt material. Trots detta finns det ett flertal egenskaper som begränsar papperets användbarhet. Ett av de större problemen med cellulosa- och lignocellulosafibrer är att de sänker sin fria energi genom att sorbera vatten, och denna sorption förändrar papperets dimensioner. Detta fenomen kallas vanligtvis för bristfällig dimensionsstabilitet och uppträder i form av registerfel vid flerfärgstryck eller som krullning, buckling och vågiga papperskanter vid utskrift, kopiering och lagring, eller med en vidare definition som förkortad livslängd hos lådor på grund av mekanosorptivt kryp.
Avsikten med denna avhandling har varit att studera och kvantifiera vilka egenskaper som styr, och hur de påverkar, den vatteninducerade dimensionsförändringen som sker hos ett fibernätverk, samt hur dess dimensionsstabilitet kan förbättras. Detta har studerats både genom att ändra fiberns fuktsorptionsegenskaper och genom att förändra adhesionen och kontaktgraden mellan fibrerna i fiber-fiberfogarna. Fogegenskaperna har också varierats genom att tillverka laboratorieark torkade under inspänning samt ark torkade fritt för att minimera mängden inbyggda spänningar i arket.
Blekt kraftmassa har behandlats med polyelektrolytmultilager (PEM) för att förbättra adhesionen mellan fibrerna och för att öka kontaktgraden mellan fibrerna i fogen. Kontaktgraden har även minskats genom förhorning av fibrerna före arkformning. För de ark som fick torka fritt gav PEM-behandlingen en ökad hygroexpansionskoefficient, det vill säga dimensionsförändringen normaliserad mot förändringen i fuktinnehåll, vid samma förändring i relativ luftfuktighet medan förhorningen minskade hygroexpansionskoefficienten något. Om arken emellertid torkades under inspänning observerades ingen skillnad i hygroexpansionskoefficient mellan de olika fibermodifieringarna. Detta tolkades som ett resultat av en ökad kontaktzon och en större utbredning ut ur fogens plan, när arken torkades utan inspänning. En utbredning som medför att en större del av fiberns transversella expansion överförs som expansion i pappersplanet.
Fibrernas fuktsorptionsegenskaper förändrades genom natriumperjodatoxidering av 1,4-glukanernas C2-C3-bindning. Detta skapade sannolikt tvärbindningar i fiberväggen som förbättrade fiberväggens tålighet både genom att låsa fibrillerna närmare varandra och genom att ta bort potentiella adsorptionssäten som annars är tillgängliga för vattenadsorption. Perjodatoxidationen minskar också fibrernas kristallinitet och således frigjorde oxidationen hydroxylgrupper där vattenmolekyler kan adsorbera. Detta innebar att oxidationen både minskade och ökade interaktionen mellan vatten och fibervägg, men dock på olika strukturell nivå. Tvärbindningarna visade sig också märkbart reducera sorptionshastigheten när arken utsattes för en förändrad luftfuktighet så länge de inte tidigare utsatts för relativa luftfuktigheter nära mättnad. Som ett resultat av den lägre förändringen i fuktinnehåll vid en förändring i luftfuktighet från 20 till 85 % RF minskade dimensionsförändringens amplitud för de tvärbundna arken upp till 30 %. Emellertid uppvisade de tvärbundna arken en högre hygroexpansionskoefficeint, vilket innebär att de blev mer känsliga för absoluta förändringar i fuktinnehåll.
Paper is a very versatile material. Nevertheless, there are several factors limiting its usefulness, and one of the major issues is that cellulosic and ligno-cellulosic fibres lower their free energy by sorbing water and this water changes the dimensions of the paper. This phenomenon is usually referred to as a lack of dimensional stability and is often evident as misregister during multicolour printing or curl, cockle and wavy edges during printing, copying and storage or, with a wider definition, also as a shortened life-time of boxes during storage due to mechano-sorptive creep.
The work described in this thesis aims to study and quantify the importance of the different mechanisms causing water-induced dimensional changes in a fibre network and to investigate how to improve the dimensional stability of ligno-cellulosic materials. This has been done both by altering the fiber properties such as the moisture sorptivity and by changing the adhesion and degree of contact within the fibre-fibre joints. The properties of the fibre-fibre joints have been varied by drying laboratory sheets both under restraint and freely to minimise the generation of built-in stresses.
Bleached kraft fibres were treated using the polyelectrolyte multilayer (PEM) technique to improve the adhesion between the fibres and to increase the molecular contact within the joints. In contrast, the degree of contact was impaired by hornifying the fibres before sheet preparation. For sheets allowed to dry freely, the PEM-treatment increased the hygroexpansion coefficient, i.e. the dimensional movement normalised with respect to the change in moisture content, when subjected to changes in relative humidity whereas the hornification process resulted in a slightly lowered hygroexpansion coefficient. However, when the sheets were dried under restraint, the different joint and fibre modifications led to no difference in hygroexpansion coefficient. This was interpreted as being a result of an increase in the total contact zone between the fibres when the sheets were dried under restraint, with a greater extension in the outof- plain direction of the joint resulting in a transfer of a larger part of the transverse swelling to the in-plane expansion.
The sorptivity of the fibres was changed by oxidising the C2-C3 bond of the 1,4- glucans with periodate. This most likely created covalent cross-links in the fibre wall both improved the integrity of the fibre wall by locking adjacent fibril lamellae to each other and also removed possible sites for water sorption onto the cellulose surfaces. Periodate oxidation also led to a decrease in the crystallinity of the cellulose within the fibres, making more cellulose hydroxyl groups available for the adsorption of water molecules. This means that the oxidation both decreased and increased the interaction between the fibre wall and moisture but, on two different structural levels. The crosslinks significantly reduced the sorption rate when the papers was subjected to changes in relative humidity, as long as the fibres were not subjected to humidities close to saturation. The smaller change in moisture content when the relative humidity was changed between 20 and 85 % RH meant that the dimensional stability of the crosslinked sheets was increased. On the other hand, the hygroexpansion coefficient was increased in the case of papers made from fibres with the highest degree of oxidation, i.e. the sheets became more sensitive to absolute changes in moisture content.
Larsson, Per A. "Dimensional Stability of Paper : Influence of Fibre-Fibre Joints and Fibre Wall Oxidation." Licentiate thesis, KTH, Fiberteknologi, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-4635.
Full textPaper is a very versatile material. Nevertheless, there are several factors limiting its usefulness, and one of the major issues is that cellulosic and ligno-cellulosic fibres lower their free energy by sorbing water and this water changes the dimensions of the paper. This phenomenon is usually referred to as a lack of dimensional stability and is often evident as misregister during multicolour printing or curl, cockle and wavy edges during printing, copying and storage or, with a wider definition, also as a shortened life-time of boxes during storage due to mechano-sorptive creep. The work described in this thesis aims to study and quantify the importance of the different mechanisms causing water-induced dimensional changes in a fibre network and to investigate how to improve the dimensional stability of ligno-cellulosic materials. This has been done both by altering the fiber properties such as the moisture sorptivity and by changing the adhesion and degree of contact within the fibre-fibre joints. The properties of the fibre-fibre joints have been varied by drying laboratory sheets both under restraint and freely to minimise the generation of built-in stresses. Bleached kraft fibres were treated using the polyelectrolyte multilayer (PEM) technique to improve the adhesion between the fibres and to increase the molecular contact within the joints. In contrast, the degree of contact was impaired by hornifying the fibres before sheet preparation. For sheets allowed to dry freely, the PEM-treatment increased the hygroexpansion coefficient, i.e. the dimensional movement normalised with respect to the change in moisture content, when subjected to changes in relative humidity whereas the hornification process resulted in a slightly lowered hygroexpansion coefficient. However, when the sheets were dried under restraint, the different joint and fibre modifications led to no difference in hygroexpansion coefficient. This was interpreted as being a result of an increase in the total contact zone between the fibres when the sheets were dried under restraint, with a greater extension in the outof- plain direction of the joint resulting in a transfer of a larger part of the transverse swelling to the in-plane expansion. The sorptivity of the fibres was changed by oxidising the C2-C3 bond of the 1,4- glucans with periodate. This most likely created covalent cross-links in the fibre wall both improved the integrity of the fibre wall by locking adjacent fibril lamellae to each other and also removed possible sites for water sorption onto the cellulose surfaces. Periodate oxidation also led to a decrease in the crystallinity of the cellulose within the fibres, making more cellulose hydroxyl groups available for the adsorption of water molecules. This means that the oxidation both decreased and increased the interaction between the fibre wall and moisture but, on two different structural levels. The crosslinks significantly reduced the sorption rate when the papers was subjected to changes in relative humidity, as long as the fibres were not subjected to humidities close to saturation. The smaller change in moisture content when the relative humidity was changed between 20 and 85 % RH meant that the dimensional stability of the crosslinked sheets was increased. On the other hand, the hygroexpansion coefficient was increased in the case of papers made from fibres with the highest degree of oxidation, i.e. the sheets became more sensitive to absolute changes in moisture content.
QC 20101117
Lee, Ching Hao. "Fire retardant behavior of Kenaf fibre reinforced Floreon composite." Thesis, University of Sheffield, 2018. http://etheses.whiterose.ac.uk/19908/.
Full textDraghetti, Michela. "Fibre naturali nel settore dei compositi: confronto fibre di lino vs. fibre di carbonio." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2019. http://amslaurea.unibo.it/18602/.
Full textApriyanto, Haris. "Study, analysis and experimental validation of fiber refractometers based on single-mode, multimode and photonic crystal fibers for refractive index measurements with application for the detection of methane." Thesis, Toulouse, INPT, 2019. http://www.theses.fr/2019INPT0022.
Full textRefractive index measurement has been studied since Ernest Abbé initially designed a refractometer in 1869, which is named the Abbé refractometer. Since then, numerous types of refractometers have been developed by employing either the optical prism-based refractometer or the optical fiber-based refractometer, due to their wide-ranging applications such as for sensingvarious physical, biological and chemical parameters. Recently, a large number of researchers have been developing refractometers based on optical fibers, exploiting mechanisms such as surface plasmon resonance (SPR), multimode interference, fiber Bragg gratings (FBG), long period gratings (LPG), tapered optical fibers, and striped-cladding multimode fibers (MMF), for their advantages in immunity against electromagnetic interference, electrical passivity at the sensing probe, and capability to long term in-situ measurement. This thesis concerns the development of comprehensively functional and accurate models for optical fiber refractometers based on optical intensity modulation, in particular for stripped-cladding MMF refractometry as well as hybrid systems involving a combination of single-mode-multimode fiber refractometery and the all-fiber hybrid refractometer using photonic crystal fibers. A key objective of this work is to characterize the performance of these intensity-based optical fiber refractometers in terms of their power response, sensitivity, resolution, and dynamic range. The simulation results which are corroborated experimentally demonstrate very high sensitivity being obtained in Zone II (i.e. the sensing regime typically employed for measuring a sensing medium index higher than the cladding index but less than or equal to the core index) for all three types of refractometers. However, the sensitivity in Zone III (i.e. the sensing regime for which the sensing medium index is higher than the core index) is very low. A hybrid single-mode fiber - multimode fiber configuration is used to improve the sensitivity in Zone III. On other hand, the sensitivity for Zone I (i.e. the sensing regime typically employed for measuring a sensing medium index lower than the cladding index) has been improved by increasing evanescent wave absorption using the all-fiber hybrid refractometer based on solid-core photonic crystal fibers. As a further potential of the fiber refractometer for applications in biochemical sensing, the proof-of-concept for a methane gas sensor has been demonstrated using supramolecular cryptophane-A which enables to trap the methane molecules. Cryptophane-A incorporated into a functionalized film of StyreneAcrylonitrile (SAN) host is applied to a de-cladded region of the sensor as the sensitive region. The refractive index of this functionalized layer increases proportionally with increasing methane concentration, subsequently inducing variations in the transmitted optical power along the fiber sensor
Books on the topic "Fibre"
Selle, Giovanni. Fibre. Italy: Il Ceppo, 1988.
Find full textEngineers, Institution of Electrical, ed. Optical fibre. London, U.K: P. Peregrinus on behalf of the Institution of Electrical Engineers, 1988.
Find full textC, Trowell H., Burkitt D. P, and Heaton K. W, eds. Dietary fibre, fibre-depleted foods and disease. London: Academic Press, 1985.
Find full textvan der Kamp, J. W., N. G. Asp, J. Miller Jones, and G. Schaafsma, eds. Dietary Fibre. The Netherlands: Wageningen Academic Publishers, 2004. http://dx.doi.org/10.3920/978-90-8686-662-5.
Full textvan der Kamp, Jan Willem, Julie Jones, Barry McCleary, and David Topping, eds. Dietary fibre. The Netherlands: Wageningen Academic Publishers, 2010. http://dx.doi.org/10.3920/978-90-8686-692-2.
Full textHusemoller, Dale. Fibre Bundles. New York, NY: Springer New York, 1994. http://dx.doi.org/10.1007/978-1-4757-2261-1.
Full textCarty, Peter. Fibre properties. 2nd ed. Gosforth: Formword, 1994.
Find full textFoundation, British Nutrition. Dietary fibre. London: British Nutrition Foundation, 1988.
Find full textHusemöller, Dale. Fibre bundles. 3rd ed. New York: Springer-Verlag, 1994.
Find full textGurr, M. I. Dietary fibre. Washington, D.C: ILSI Press, 1994.
Find full textBook chapters on the topic "Fibre"
Leech, C. M. "Fibre Geometry and Fibre Mechanics." In Solid Mechanics and Its Applications, 5–36. Dordrecht: Springer Netherlands, 2013. http://dx.doi.org/10.1007/978-94-007-7841-2_2.
Full textSampson, William Wyatt. "Poisson Fibre Processes I: Fibre Phase." In Engineering Materials and Processes, 105–57. London: Springer London, 2009. http://dx.doi.org/10.1007/978-1-84800-991-2_4.
Full textFerguson, A. I., M. W. Phillips, D. C. Hanna, and A. C. Tropper. "Fibre Lasers." In Laser Spectroscopy VIII, 422–25. Berlin, Heidelberg: Springer Berlin Heidelberg, 1987. http://dx.doi.org/10.1007/978-3-540-47973-4_135.
Full textDuplij, Steven, Steven Duplij, Paulius Miškinis, Steven Duplij, Allen Parks, Cosmas Zachos, Artur Sergyeyev, Robert Marnelius, and Wojciech Florek. "Fibre Bundle." In Concise Encyclopedia of Supersymmetry, 148. Dordrecht: Springer Netherlands, 2004. http://dx.doi.org/10.1007/1-4020-4522-0_193.
Full textGadea, P. M., and J. Muñoz Masqué. "Fibre Bundles." In Analysis and Algebra on Differentiable Manifolds, 183–232. Dordrecht: Springer Netherlands, 2009. http://dx.doi.org/10.1007/978-90-481-3564-6_5.
Full textSibley, M. J. N. "Optical Fibre." In Optical Communications, 6–75. London: Macmillan Education UK, 1995. http://dx.doi.org/10.1007/978-1-349-13524-0_2.
Full textSibley, M. J. N. "Optical Fibre." In Optical Communications, 7–46. London: Palgrave Macmillan UK, 1990. http://dx.doi.org/10.1007/978-1-349-20718-3_2.
Full textGuaraldo, Francesco, Patrizia Macrì, and Alessandro Tancredi. "Fibre Bundles." In Topics on Real Analytic Spaces, 149–60. Wiesbaden: Vieweg+Teubner Verlag, 1986. http://dx.doi.org/10.1007/978-3-322-84243-5_8.
Full textSimmonds, Andrew. "Fibre Optics." In Data Communications and Transmission Principles, 132–52. London: Macmillan Education UK, 1997. http://dx.doi.org/10.1007/978-1-349-13900-2_6.
Full textStarr, Trevor F. "Fibre Cables." In Glass-Fibre Databook, 236–42. Dordrecht: Springer Netherlands, 1993. http://dx.doi.org/10.1007/978-94-011-1492-9_14.
Full textConference papers on the topic "Fibre"
Dantas, Lucas Cristiano, Everton Cavalcante, and Thais Batista. "Facilitando o Desenvolvimento de Aplicações de Internet das Coisas: Um Estudo Experimental." In Workshop do Testbed FIBRE. Sociedade Brasileira de Computação, 2021. http://dx.doi.org/10.5753/fibre.2021.15767.
Full textOliveira-Jr, Antonio, Ciro Macedo, Gabriel M. F. de Almeida, Leonardo Rodrigues, Marcos Abreu, Sand Correa, and Kleber Cardoso. "Experimentos da Proposta de Integração SOFTWAY4IoT e FIWARE-Lab@RNP para Internet das Coisas (IoT)." In Workshop do Testbed FIBRE. Sociedade Brasileira de Computação, 2021. http://dx.doi.org/10.5753/fibre.2021.15768.
Full textCoelho, Igor M., and Vitor N. Coelho. "NeoCompiler Eco: experimentação de consenso em blockchain e contratos inteligentes." In Workshop do Testbed FIBRE. Sociedade Brasileira de Computação, 2021. http://dx.doi.org/10.5753/fibre.2021.15770.
Full textPrates Jr., Nelson G., Allex Magno Andrade, Emerson Ribeiro de Mello, Michelle Silva Wangham, and Michele Nogueira. "Um Ambiente de Experimentação em Cibersegurança para Internet das Coisas." In Workshop do Testbed FIBRE. Sociedade Brasileira de Computação, 2021. http://dx.doi.org/10.5753/fibre.2021.15771.
Full textAlmeida, Francielly S., Gustavo T. Laureano, Leandro A. Freitas, and Sand L. Correa. "Desenvolvimento de uma Aplicação para Escritórios Inteligentes Usando a Plataforma FIWARE e o ambiente FIWARE-Lab@RNP." In Workshop do Testbed FIBRE. Sociedade Brasileira de Computação, 2021. http://dx.doi.org/10.5753/fibre.2021.15766.
Full textTrindade, Yan, Luiz Henrique Calixto de Souza, Lucas C. Jorge, Andre G. Damaceno, and Jacir L. Bordim. "Desenvolvimento de Aplicação IoT utilizando a Plataforma Integrada Softway4IoT e Fiware." In Workshop do Testbed FIBRE. Sociedade Brasileira de Computação, 2021. http://dx.doi.org/10.5753/fibre.2021.15769.
Full textNassif, Nadia A., Luciano Martins, Luciano A. Domingos, Fernando N. N. Farias, José L. S. Lopes, Lucas Borges, Niudomar S. A. Chaves, Marcos Schwarz, and Rafael C. Figueiredo. "Aplicação Northbound baseada em Transport API (TAPI) usando Controlador ONOS e transponder configurável de padrão aberto para a criação de circuito óptico fim a fim." In Workshop do Testbed FIBRE. Sociedade Brasileira de Computação, 2021. http://dx.doi.org/10.5753/fibre.2021.15765.
Full textWeber, HP, and W. Lüthy. "Fibre lasers for surgery." In The European Conference on Lasers and Electro-Optics. Washington, D.C.: Optica Publishing Group, 1996. http://dx.doi.org/10.1364/cleo_europe.1996.cthm1.
Full textRao, C. B. Kameswara, S. R. R. Teja Prathipati, and Hanuma Kasagani. "Impact of the Fiber Distribution Characteristics on the Uniaxial Behaviour of Fiber-Reinforced Composites- An Experimental Study." In The 2nd International Conference on Civil Infrastructure and Construction. Qatar University Press, 2023. http://dx.doi.org/10.29117/cic.2023.0083.
Full textDianov, E. M., K. M. Golant, V. M. Mashinsky, O. I. Medvedkov, I. V. Nikolin, O. D. Sazhin, and S. A. Vasiliev. "Highly Photosensitive Germanosilicate Fibre Codoped with Nitrogen." In Bragg Gratings, Photosensitivity, and Poling in Glass Fibers and Waveguides. Washington, D.C.: Optica Publishing Group, 1997. http://dx.doi.org/10.1364/bgppf.1997.bme.2.
Full textReports on the topic "Fibre"
McCloghrie, K. Fibre Channel Management MIB. RFC Editor, May 2005. http://dx.doi.org/10.17487/rfc4044.
Full textZhang, Lin. High Extinction Ratio In-Fibre Polarisers by Exploiting Tilted Fibre Bragg Grating Structures for Single-Polarisation High-Power Fibre Lasers and Amplifiers. Fort Belvoir, VA: Defense Technical Information Center, November 2009. http://dx.doi.org/10.21236/ada524631.
Full textWeber, R., M. Rajagopal, F. Travostino, M. O'Donnell, C. Monia, and M. Merhar. Fibre Channel (FC) Frame Encapsulation. RFC Editor, December 2003. http://dx.doi.org/10.17487/rfc3643.
Full textDeSanti, C., V. Gaonkar, H. K. Vivek, K. McCloghrie, and S. Gai. Fibre-Channel Name Server MIB. RFC Editor, April 2006. http://dx.doi.org/10.17487/rfc4438.
Full textDeSanti, C., K. McCloghrie, S. Kode, and S. Gai. Fibre Channel Routing Information MIB. RFC Editor, September 2006. http://dx.doi.org/10.17487/rfc4625.
Full textDeSanti, C., H. K. Vivek, K. McCloghrie, and S. Gai. Fibre Channel Zone Server MIB. RFC Editor, August 2007. http://dx.doi.org/10.17487/rfc4936.
Full textJones, Sid. Fibre Channel Avionics Bus Monitor. Fort Belvoir, VA: Defense Technical Information Center, February 2001. http://dx.doi.org/10.21236/ada389673.
Full textPiggott, Michael R. Mesomechanical Model for Fibre Composites. Fort Belvoir, VA: Defense Technical Information Center, July 1990. http://dx.doi.org/10.21236/ada226792.
Full textRajagopal, M., R. Bhagwat, and W. Rickard. IP and ARP over Fibre Channel. RFC Editor, June 1999. http://dx.doi.org/10.17487/rfc2625.
Full textRajagopal, M., E. Rodriguez, and R. Weber. Fibre Channel Over TCP/IP (FCIP). RFC Editor, July 2004. http://dx.doi.org/10.17487/rfc3821.
Full text