Relevant bibliographies by topics / Fiber Bragg Grating Seismic Sensor

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Fiber Bragg Grating Seismic Sensor'

Author: Grafiati
Published: 6 September 2023
Last updated: 7 September 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Fiber Bragg Grating Seismic Sensor.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Fiber Bragg Grating Seismic Sensor"

1

Laudati, A., F. Mennella, M. Giordano, G. D'Altrui, C. Calisti Tassini, and A. Cusano. "A Fiber-Optic Bragg Grating Seismic Sensor." IEEE Photonics Technology Letters 19, no. 24 (December 2007): 1991–93. http://dx.doi.org/10.1109/lpt.2007.909628.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Li, Yuqing, Kuo Li, Guoyong Liu, Juan Tian, and Yanchun Wang. "A pre-relaxed FBG accelerometer using transverse forces with high sensitivity and improved resonant frequency." Photonics Letters of Poland 12, no. 1 (March 31, 2020): 4. http://dx.doi.org/10.4302/plp.v12i1.918.

Full text
Abstract:
Fiber Bragg grating (FBG) accelerometers using transverse forces have higher sensitivity but lower resonant frequency than ones using axial forces. By shortening the distance between the two fixed ends of the FBG, the resonant frequency can be improved without lowing the sensitivity. Here, a compact FBG accelerometer using transverse forces with a slightly pre-relaxed FBG and 25mm distance between the two fixed ends has been demonstrated with the crest-to-trough sensitivity 1.1nm/g at 5Hz and the resonant frequency 42Hz. It reveals that making the FBG slightly pre-relaxed rather than pre-stretched also improves the tradeoff between the sensitivity and resonant frequency. Full Text: PDF References:Kawasaki, B. S. , Hill, K. O , Johnson, D. C. , & Fujii, Y. , "Narrow-band Bragg reflectors in optical fibers", Optics Letters 3, 66 (1978) [CrossRef]K. O. Hill, and G. Meltz, "Fiber Bragg grating technology fundamentals and overview", Journal of Lightwave Technology 15, 1263 (1997) [CrossRef]B. Lee, "Review of the present status of optical fiber sensors", Optical Fiber Technology, 9, 57-79 (2003) [CrossRef]Laudati, A. , Mennella, F. , Giordano, M. , D"Altrui, G. , Tassini, C. C. , & Cusano, A., "A Fiber-Optic Bragg Grating Seismic Sensor", IEEE Photonics Technology Letters, 19, 1991 (2007) [CrossRef]P. F. Costa Antunes, C. A. Marques, H. Varum, and P. S. Andre, "Biaxial Optical Accelerometer and High-Angle Inclinometer With Temperature and Cross-Axis Insensitivity", IEEE Sens. J. 12, 2399 (2012) [CrossRef]Guo, Y. , Zhang, D. , Zhou, Z. , Xiong, L. , & Deng, X., "Welding-packaged accelerometer based on metal-coated FBG", Chinese Optics Letters, 11, 21 (2013). [CrossRef]Zhang, Y. , Zhang, W. , Zhang, Y. , Chen, L. , Yan, T. , & Wang, S. , et al., "2-D Medium–High Frequency Fiber Bragg Gratings Accelerometer", IEEE Sensors Journal, 17, 614(2017) [CrossRef]Xiu-bin Zhu, "A novel FBG velocimeter with wind speed and temperature synchronous measurement", Optoelectronics Letters, 14, 276-279 (2018) [CrossRef]Li, K. , Yau, M. H. , Chan, T. H. T. , Thambiratnam, D., "Fiber Bragg grating strain modulation based on nonlinear string transverse-force amplifier", & Tam, H. Y. , Optics Letters, 38, 311 (2013) [CrossRef]Li, K. , Chan, T. H. T. , Yau, M. H. , Nguyen, T. , Thambiratnam, D. P. , & Tam, H. Y., "Very sensitive fiber Bragg grating accelerometer using transverse forces with an easy over-range protection and low cross axial sensitivity", Applied Optics, 52, 6401 (2013) [CrossRef]Li, K. , Chan, T. H. T. , Yau, M. H. , Thambiratnam, D. P. , & Tam, H. Y., "Biaxial Fiber Bragg Grating Accelerometer Using Axial and Transverse Forces", IEEE Photonics Technology Letters, 26, 1549 (2014). [CrossRef]Li, K. , Chan, T. H. , Yau, M. H. , Thambiratnam, D. P. , & Tam, H. Y., "Experimental verification of the modified spring-mass theory of fiber Bragg grating accelerometers using transverse forces", Applied Optics, 53, 1200-1211(2014) [CrossRef]
APA, Harvard, Vancouver, ISO, and other styles
3

Johni, Riyam, Kanar Tariq, Roshen Ahmadhamdi, and David Forsyth. "Investigation into Fiber Optic Seismic Sensor incorporating Fiber Bragg Grating Array." Passer Journal of Basic and Applied Sciences 4, no. 2 (December 1, 2022): 92–99. http://dx.doi.org/10.24271/psr.2022.318987.1111.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Jalil, Muhammad Arif Bin. "Simulation of Fibre Bragg Grating as Strain Sensor for Property Intrusion." International Journal for Research in Applied Science and Engineering Technology 9, no. 12 (December 31, 2021): 1862–68. http://dx.doi.org/10.22214/ijraset.2021.39539.

Full text
Abstract:
Abstract: This study will demonstrate a strain sensor based on the optical Fibre Bragg Grating (FBG) sensing technology as it is known to have stable and reliable wavelength and response as function of the applied strain. This kind of sensor can perform accurate measurements of small ground vibration and monitor seismic activity thanks to their high sensitivity to dynamic strains induced by acceleration variation which can use to prevent property intrusion or burglary. To understand the FBG sensor more, few of its characteristics such as strain, spectral reflectivity and bandwidth and their connection with the fibre grating length and refractive index is being studied. Keywords: Fibre Bragg Grating(FBG); strain sensor; strain; spectral reflectivity; bandwidth; fibre grating length; refractive index; safety; property intrusion.
APA, Harvard, Vancouver, ISO, and other styles
5

Zhou, Jinghai, Li Sun, and Hongnan Li. "Study on Dynamic Response Measurement of the Submarine Pipeline by Full-Term FBG Sensors." Scientific World Journal 2014 (2014): 1–9. http://dx.doi.org/10.1155/2014/808075.

Full text
Abstract:
The field of structural health monitoring is concerned with accurately and reliably assessing the integrity of a given structure to reduce ownership costs, increase operational lifetime, and improve safety. In structural health monitoring systems, fiber Bragg grating (FBG) is a promising measurement technology for its superior ability of explosion proof, immunity to electromagnetic interference, and high accuracy. This paper is a study on the dynamic characteristics of fiber Bragg grating (FBG) sensors applied to a submarine pipeline, as well as an experimental investigation on a laboratory model of the pipeline. The dynamic response of a submarine pipeline under seismic excitation is a coupled vibration of liquid and solid interaction. FBG sensors and strain gauges are used to monitor the dynamic response of a submarine pipeline model under a variety of dynamic loading conditions and the maximum working frequency of an FBG strain sensor is calculated according to its dynamic strain responses. Based on the theoretical and experimental results, it can be concluded that FBG sensor is superior to strain gauge and satisfies the demand of dynamic strain measurement.
APA, Harvard, Vancouver, ISO, and other styles
6

Wang, Jin-Yu, Guang-Dong Song, Xiao-Hui Liu, Chang Wang, and Tong-Yu Liu. "A High Sensitive Micro-Seismic Fiber Bragg Grating(FBG) Sensor System." Procedia Engineering 26 (2011): 765–71. http://dx.doi.org/10.1016/j.proeng.2011.11.2235.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Hong, Li, Yufeng Zhang, Lixin Li, Peng Zhang, and Jiaxuan Liu. "Low-frequency FBG vibration sensors for micro-seismic monitoring." Measurement Science and Technology 34, no. 10 (July 12, 2023): 105120. http://dx.doi.org/10.1088/1361-6501/ace4e7.

Full text
Abstract:
Abstract Vibration sensors are key components in low-frequency micro-seismic monitoring, and their performance directly determines the accuracy of monitoring results. In response to the current problem that fiber Bragg grating (FBG) vibration sensors are difficult to effectively monitor micro-seismic low-frequency vibration signals, a rigid L-shaped beam FBG vibration sensor based on bearings is proposed. Firstly, a sensor model is established and theoretically analyzed; secondly, key parameters are optimized using differential evolution algorithm and imported into COMSOL simulation software for static stress analysis and dynamic characteristic analysis; finally, the sensor prototype is developed and a low-frequency vibration test system is set up to verify the sensor performance. The results reveal that the inherent frequency of the sensor is 57 Hz, with a flat response band of 0.3–35 Hz, a frequency lower limit of 0.05 Hz, a transverse interference degree of 4.5%, an average sensitivity of over 800 pm g−1, a dynamic range of 67.75 dB, favorable linearity, and the ability to achieve temperature self-compensation. Research findings provide new insights into low-frequency micro-seismic monitoring.
APA, Harvard, Vancouver, ISO, and other styles
8

Weng, Yinyan, Xueguang Qiao, Tuan Guo, Manli Hu, Zhongyao Feng, Ruohui Wang, and Jing Zhang. "A Robust and Compact Fiber Bragg Grating Vibration Sensor for Seismic Measurement." IEEE Sensors Journal 12, no. 4 (April 2012): 800–804. http://dx.doi.org/10.1109/jsen.2011.2166258.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Yu, Junzhe, Pengbai Xu, Zhangjun Yu, Kunhua Wen, Jun Yang, Yuncai Wang, and Yuwen Qin. "Principles and Applications of Seismic Monitoring Based on Submarine Optical Cable." Sensors 23, no. 12 (June 15, 2023): 5600. http://dx.doi.org/10.3390/s23125600.

Full text
Abstract:
Submarine optical cables, utilized as fiber-optic sensors for seismic monitoring, are gaining increasing interest because of their advantages of extending the detection coverage, improving the detection quality, and enhancing long-term stability. The fiber-optic seismic monitoring sensors are mainly composed of the optical interferometer, fiber Bragg grating, optical polarimeter, and distributed acoustic sensing, respectively. This paper reviews the principles of the four optical seismic sensors, as well as their applications of submarine seismology over submarine optical cables. The advantages and disadvantages are discussed, and the current technical requirements are concluded, respectively. This review can provide a reference for studying submarine cable-based seismic monitoring.
APA, Harvard, Vancouver, ISO, and other styles
10

Wang, Jin-Yu, Tong-Yu Liu, Chang Wang, Xiao-Hui Liu, Dian-Heng Huo, and Jun Chang. "A micro-seismic fiber Bragg grating (FBG) sensor system based on a distributed feedback laser." Measurement Science and Technology 21, no. 9 (July 28, 2010): 094012. http://dx.doi.org/10.1088/0957-0233/21/9/094012.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Fiber Bragg Grating Seismic Sensor"

1

Sethuraman, Gopakumar. "Fiber Bragg Grating (FBG) Based Chemical Sensor." VCU Scholars Compass, 2008. http://scholarscompass.vcu.edu/etd/1575.

Full text
Abstract:
In this work, reagentless fiber optic-based chemical sensors for water quality testing were fabricated by coating fiber Bragg gratings with the glassy polymer cellulose acetate. With this polymeric matrix capable of localizing or concentrating chemical constituents within its structure, immersion of the coated grating in various chemical solutions causes the rigid polymer to expand and mechanically strain the glass fiber. The corresponding changes in the periodicity of the grating subsequently result in altered Bragg-reflected responses. A high-resolution tunable fiber ring laser interrogator is used to obtain room temperature reflectance spectrograms from two fiber gratings at 1550 nm and 1540 nm wavelengths. Rapidly swept measurements of the full spectral shapes yield real-time chemical detection and identification. With deionized water as a reference, wavelength shifts in the reflectivity transition edge from –82 pm to +43 pm and changes in response bandwidth from –27 pm to +42 pm are used to identify uniquely a diverse selection of chemical analytes.
APA, Harvard, Vancouver, ISO, and other styles
2

Shengnan, Geng, Wang Xinglai, and Feng Hui. "FIBER BRAGG GRATING SENSOR SYSTEM FOR MONITORING COMPOSITE AEROSPACE STRUCTURES." International Foundation for Telemetering, 2016. http://hdl.handle.net/10150/624242.

Full text
Abstract:
To investigate strain-sensitive characteristics of fiber Bragg grating (FBG) sensors, a minimal sensing system consisting of multiplex FBG sensors and signal demodulating and processing instruments was constructed. FBG sensors were designed with different package structures for respectively sensing strain or temperature parameters, and they returned measurand-dependent wavelengths back to the interrogation system for measurement with high resolution. In this paper, tests were performed on structure samples with step-wise increase of deformations. Both FBG sensing system and strain gages were tested and compared. Experimental work proved that the FBG sensing system had a good level of accuracy in measuring the static response of the tested composite structure. Moreover the additional advantages such as damp proofing, high sampling rates and real-time inspection make the novel system especially appropriate for load monitoring and damage detection of aerospace structures.
APA, Harvard, Vancouver, ISO, and other styles
3

Al-Tarawneh, Mu'ath. "Traffic Monitoring System Using In-Pavement Fiber Bragg Grating Sensors." Diss., North Dakota State University, 2019. https://hdl.handle.net/10365/31539.

Full text
Abstract:
Recently, adding more lanes becomes less and less feasible, which is no longer an applicable solution for the traffic congestion problem due to the increment of vehicles. Using the existing infrastructure more efficiently with better traffic control and management is the realistic solution. An effective traffic management requires the use of monitoring technologies to extract traffic parameters that describe the characteristics of vehicles and their movement on the road. A three-dimension glass fiber-reinforced polymer packaged fiber Bragg grating sensor (3D GFRP-FBG) is introduced for the traffic monitoring system. The proposed sensor network was installed for validation at the Cold Weather Road Research Facility in Minnesota (MnROAD) facility of Minnesota Department of Transportation (MnDOT) in MN. A vehicle classification system based on the proposed sensor network has been validated. The vehicle classification system uses support vector machine (SVM), Neural Network (NN), and K-Nearest Neighbour (KNN) learning algorithms to classify vehicles into categories ranging from small vehicles to combination trucks. The field-testing results from real traffic show that the developed system can accurately estimate the vehicle classifications with 98.5 % of accuracy. Also, the proposed sensor network has been validated for low-speed and high-speed WIM measurements in flexible pavement. Field testing validated that the longitudinal component of the sensor has a measurement accuracy of 86.3% and 89.5% at 5 mph and 45 mph vehicle speed, respectively. A performed parametric study on the stability of the WIM system shows that the loading position is the most significant parameter affecting the WIM measurements accuracy compared to the vehicle speed and pavement temperature. Also the system shows the capability to estimate the location of the loading position to enhance the system accuracy.
APA, Harvard, Vancouver, ISO, and other styles
4

Bigué, Jason. "Development of a novel serially multiplexed fiber Bragg grating sensor system using Fourier analysis." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1997. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp01/MQ28815.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Abdi, Abdeq M. "Structural Monitoring With Fiber Bragg Grating Strain Sensor Array and Optical Frequency Domain Reflectometry." Diss., Tucson, Arizona : University of Arizona, 2005. http://etd.library.arizona.edu/etd/GetFileServlet?file=file:///data1/pdf/etd/azu%5Fetd%5F1399%5F1%5Fm.pdf&type=application/pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Li, Kuo. "A novel method of Fiber Bragg Grating (FBG) strain modulation and its application in FBG accelerometers." Thesis, Queensland University of Technology, 2014. https://eprints.qut.edu.au/76108/4/Kuo_Li_Thesis.pdf.

Full text
Abstract:
This thesis has systemically investigated the possibility of improving one type of optical fiber sensors by using a novel mechanism. Many parameters of the sensor have been improved, and one outcome of this innovation is that civil structures, such as bridges and high-rise buildings, may be operated more safely and used longer.
APA, Harvard, Vancouver, ISO, and other styles
7

Egorov, Jacob. "Wavelength accuracy study for high-density Fiber Bragg grating sensor systems using a Rapidly-Swept Akinetic-Laser source." DigitalCommons@CalPoly, 2016. https://digitalcommons.calpoly.edu/theses/1654.

Full text
Abstract:
This thesis studies the center wavelength accuracy of a Fiber Bragg Grating Sensor system that has a large number of sensor elements both as a function of wavelength and as a function of position. Determining the center wavelength of each of the fiber optic sensors is a critical parameter that ultimately determines sensor accuracy. The high density environment can result in degradation of accuracy of the center wavelength measurement. This thesis aims to quantify this measurement error both with theoretical and experimental studies. There are many sensing applications where optical fiber sensors are preferred over electrical sensors, such as the oil and gas industry where fiber optic sensors are used to monitor wells and pipelines due to their low signal degradation over long distances and immunity to harsh physical environments. Fiber Bragg grating (FBG) sensors in particular have widespread use because of their versatility, measurement sensitivity, and distributed multiplexing abilities. In conventional wavelength multiplexing, up to 50 FBG sensors are spread out over a band of 100nm, each with a center wavelength difference large enough so that each element can be individually measured. However, numerous sensing applications require several hundred to over a thousand sensors cascaded together on a single fiber. These sensor arrays use a combination of WDM and TDM for measurements, where many FBG sensors with the same center wavelength are separated by a long enough length of fiber so that the reflected signals are separated in time. These Wavelength-to-Time Domain Multiplexing (W-TDM) measurements are enabled by Insight Photonic’s new ‘akinetically’ swept, all-semiconductor laser. This laser is a Vernier-Tuned Distributed Bragg Reflector (VT-DBR) device, capable of rapidly sweeping through different wavelengths without any moving parts. Attributes that make this laser superior to mechanically-swept lasers include: 1) short and long term consistent sweep-sweep reliability, 2) availability at many wavelengths, 3) a narrow linewidth with single longitudinal mode, and 4) the ability to do non-traditional sweep patterns that facilitate measurement of high-density sensor networks. In this thesis, experiments will be performed in the lab with the Insight VT-DBR laser to determine how accurately the center wavelength of a single Fiber Bragg grating can be measured. Experiments will also be performed with two and three FBGs to compare different algorithmic approaches to measurements. The second part of the thesis will simulate both single and multiple FBG sensor environments, comparing the center wavelength measurement accuracy results for different parameters including signal-to-noise ratios, wavelength point density, FBG loss and width, and multiple algorithmic approaches. The results of these experiments and simulations will demonstrate how accurate a FBG sensor system is at particular parameters, which will be useful to those designing a sensor network or performing similar experiments.
APA, Harvard, Vancouver, ISO, and other styles
8

Musa, Shah M. "Real-Time Signal Processing and Hardware Development for a Wavelength Modulated Optical Fiber Sensor System." Diss., Virginia Tech, 1997. http://hdl.handle.net/10919/30679.

Full text
Abstract:
The use of optical fiber sensors is increasing widely in civil, industrial, and military applications mainly due to their, (a) miniature size, (b) high sensitivity, (c) immunity from electro-magnetic interference, (d) resistance to harsh environments, (e) remote signal processing ability, and, (f) multiplexing capabilities. Because of these advantages a variety of optical fiber sensing techniques have evolved over the years having potentials for myriad of applications. One very challenging job, for any of these optical fiber sensing techniques, is to implement a stand alone system with the design and development of all the signal processing models along with the necessary hardware, firmware, and software satisfying the real-time signal processing requirements. In this work we first develop the equations for the system model of the wavelength modulated extrinsic Fabry-Perot interferometric (EFPI) optical fiber sensor, and then design and build all the hardware and software necessary to implement a stand-a
Ph. D.
APA, Harvard, Vancouver, ISO, and other styles
9

Wang, Zhuang. "Intrinsic Fabry-Perot Interferometric Fiber Sensor Based on Ultra-Short Bragg Gratings for Quasi-Distributed Strain and Temperature Measurements." Diss., Virginia Tech, 2006. http://hdl.handle.net/10919/30213.

Full text
Abstract:
The health monitoring of smart structures in civil engineering is becoming more and more important as in-situ structural monitoring would greatly reduce structure life-cycle costs and improve reliability. The distributed strain and temperature sensing is highly desired in large structures where strain and temperature at over thousand points need to be measured simultaneously. It is difficult to carry out this task using conventional electrical strain sensors. Fiber optic sensors provide an excellent opportunity to fulfill this need due to their capability to multiplex many sensors along a single fiber cable. Numerous research studies have been conducted in past decades to increase the number of sensors to be multiplexed in a distributed sensor network. This dissertation presents detailed research work on the analysis, design, fabrication, testing, and evaluation of an intrinsic Fabry-Perot fiber optic sensor for quasi-distributed strain and temperature measurements. The sensor is based on two ultra-short and broadband reflection fiber Bragg gratings. One distinct feature of this sensor is its ultra low optical insertion loss, which allows a significant increase in the sensor multiplexing capability. Using a simple integrated sensor interrogation unit and an optical spectrum based signal processing algorithm, many sensors can be interrogated along a single optical fiber with high accuracy, high resolution and large dynamic range. Based on the experimental results and theoretical analysis, it is expected that more than 500 sensors can be multiplexed with little crosstalk using a frequency-division multiplexing technology. With this research, it is possible to build an easy fabrication, robust, high sensitivity and quasi-distributed fiber optic sensor network that can be operated reliably even in harsh environments or extended structures. This research was supported in part by U.S. National Science Foundation under grant CMS-0427951.
Ph. D.
APA, Harvard, Vancouver, ISO, and other styles
10

Rugeland, Patrik. "Applications of monolithic fiber interferometers and actively controlled fibers." Doctoral thesis, KTH, Laserfysik, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-118750.

Full text
Abstract:
The objective of this thesis was to develop applications of monolithic fiber devices and actively controlled fibers. A special twin-core fiber known as a ‘Gemini’ fiber was used to construct equal arm-length fiber interferometers, impervious to temperature and mechanical perturbations. A broadband add/drop multiplexer was constructed by inscribing fiber Bragg gratings in the arms of a Gemini Mach-Zehnder interferometer. A broadband interferometric nanosecond switch was constructed from a micro-structured Gemini fiber with incorporated metal electrodes. Additionally, a Michelson fiber interferometer was built from an asymmetric twin-core fiber and used as a high-temperature sensor. While the device could be readily used to measure temperatures below 300 °C, an annealing process was required to extend the range up to 700 °C. The work included development, construction and evaluation of the components along with numerical simulations to estimate their behaviors and to understand the underlying processes. The thesis also explored the use of electrically controlled fibers for filtering in the microwave domain. An ultra-narrow phase-shifted fiber Bragg grating inscribed in a fiber with internal electrodes was used as a scanning filter to measure modulation frequencies applied to an optical carrier. A similar grating was used inside a dual-wavelength fiber laser cavity, to generated tunable microwave beat frequencies. The studied monolithic fiber interferometers and actively controlled fibers provide excellent building blocks in such varied field as in microwave photonics, telecommunications, sensors, and high-speed switching, and will allow for further applications in the future.
Syftet med denna avhandling var att utveckla tillämpningar av monolitiska fiber komponenter samt aktivt kontrollerbara fiber. En speciell tvillingkärnefiber, även kallad ’Geminifiber’ användes för att konstruera fiber interferometrar med identisk armlängd som ej påverkas av termiska och mekaniska variationer. En bredbanding utbytarmultiplexor konstruerades genom att skriva in fiber Bragg gitter inuti grenarna på en Gemini Mach-Zehnder interferometer. Geminifibrer med interna metallelektroder användes för att konstruera en bredbandig nanosekundsnabb interferometrisk fiberomkopplare. Därtill användes en tvillingkärnefiber som en hög-temperatursensor. Även om komponenten direkt kan användas upp till 300 °C, måste den värmebehandlas för att kunna användas upp till 700 °C. Arbetet har innefattat utveckling, konstruktion och utvärdering av komponenterna parallellt med numeriska simuleringar för att analysera deras beteenden samt få insikt om de underliggande fysikaliska processerna. Avhandlingen behandlar även tillämpningar av en elektriskt styrbar fiber för att filtrera radiofrekvenser. Ett ultrasmalt fasskiftat fiber Bragg gitter skrevs in i en fiber med interna elektroder och användes som ett svepande filter för att mäta modulationsfrekvensen på en optisk bärfrekvens. Ett liknande gitter användes inuti en laserkavitet för att generera två olika våglängder samtidigt. Dessa två våglängder användes sedan för att generera en svävningsfrekvens i mikrovågsbandet. De undersökta monolitiska fiberinterferometrarna och de aktivt styrbara fibrerna erbjuder en utmärkt byggsten inom så pass skiljda områden som Mikrovågsfotonik, Telekommunikation, Sensorer samt Höghastighets-omkopplare och bör kunna användas inom många olika tillämpningar i framtiden.

QC 20130226

APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Fiber Bragg Grating Seismic Sensor"

1

Bigué, Jason. Development of a novel serially multiplexed fiber Bragg grating sensor system using Fourier analysis. Ottawa: National Library of Canada = Bibliothèque nationale du Canada, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bigué, Jason. Development of a novel serially multiplexed fiber Bragg grating sensor system using Fourier analysis. [Toronto]: Univsity of Toronto Institute for Aerspace Studie, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Fiber Bragg Grating Seismic Sensor"

1

Du, Yanliang, Baochen Sun, Jianzhi Li, and Wentao Zhang. "Fiber Bragg Grating Sensor." In Optical Fiber Sensing and Structural Health Monitoring Technology, 77–148. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-2865-7_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Rao, Y. J. "Fiber Bragg grating sensors: principles and applications." In Optical Fiber Sensor Technology, 355–79. Boston, MA: Springer US, 1998. http://dx.doi.org/10.1007/978-1-4615-5787-6_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Ning, Y. N., and B. T. Meggitt. "Fiber Bragg grating sensors: signal processing aspects." In Optical Fiber Sensor Technology, 381–417. Boston, MA: Springer US, 1998. http://dx.doi.org/10.1007/978-1-4615-5787-6_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Bartelt, Hartmut. "Fiber Bragg Grating Sensors and Sensor Arrays." In Advances in Science and Technology, 138–44. Stafa: Trans Tech Publications Ltd., 2008. http://dx.doi.org/10.4028/3-908158-12-5.138.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Yu, Yang, Guoliang Wang, and Bo Liu. "Research on Fiber Bragg Grating Acoustic Emission Sensor." In Springer Proceedings in Physics, 37–48. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-12111-2_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Gul, Baseerat, and Faroze Ahmad. "Comparative Performance Analysis of Tanh-Apodized Fiber Bragg Grating and Gaussian-Apodized Fiber Bragg Grating as Hybrid Dispersion Compensation Model." In IoT and Analytics for Sensor Networks, 71–82. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-2919-8_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Lyu, Guohui, Yu Sun, Yan Zhang, Chaozheng Wang, Xiaohang Liu, and Xu Jiang. "High Temperature Sensor Based on Regenerative Fiber Bragg Grating." In Lecture Notes in Electrical Engineering, 89–97. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-8595-7_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Li, Yuliang, Wei Wang, and Libo Qiao. "A Novel Hinge Structure of Fiber Bragg Grating Acceleration Sensor." In Lecture Notes in Electrical Engineering, 445–55. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-6508-9_54.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Bai, Bing, Yubin Guo, Xiaohui Zhao, Jiayu Huo, and Tiegang Sun. "Temperature and Strain Characteristic Analysis of Fiber Bragg Grating Sensor." In Lecture Notes in Electrical Engineering, 641–47. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-34528-9_67.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Karam, L. Z., R. L. Patyk, F. A. M. Saccon, and H. J. Kalinowski. "Walk Frequency Measurements Using a Fiber Optic Bragg Grating Sensor." In V Latin American Congress on Biomedical Engineering CLAIB 2011 May 16-21, 2011, Habana, Cuba, 128–31. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-21198-0_33.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Fiber Bragg Grating Seismic Sensor"

1

Laudati, A., F. Mennella, M. Esposito, A. Cusano, M. Giordano, G. Breglio, S. Sorge, et al. "A fiber optic Bragg grating seismic sensor." In Third European Workshop on Optical Fibre Sensors. SPIE, 2007. http://dx.doi.org/10.1117/12.738396.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Dantala, Dinakar, Putha Kishore, Pachava Vengal Rao, and Kamineni Srimannarayana. "Fiber Bragg grating seismic sensor using inverted spring-mass system." In SPIE Photonics Europe, edited by Francis Berghmans, Anna G. Mignani, and Piet De Moor. SPIE, 2014. http://dx.doi.org/10.1117/12.2052803.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Zhang, Yan, Sanguo Li, Z. Yin, Robert Pastore, Jr., Kurt O'Donnell, Michael Pellicano, John Kosinski, and Hong-Liang Cui. "Fiber Bragg grating sensors for seismic wave detection." In Bruges, Belgium - Deadline Past. SPIE, 2005. http://dx.doi.org/10.1117/12.623728.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Daxini, Swapnil, Deniz Aydin, Jack Barnes, and Hans-Peter Loock. "Remote fiber optic strain sensing with π-shifted fiber Bragg gratings." In Optical Fiber Sensors. Washington, D.C.: Optica Publishing Group, 2022. http://dx.doi.org/10.1364/ofs.2022.th4.69.

Full text
Abstract:
We present a strain sensing system capable of measuring strain over 75 km using a diode laser locked to a π-shifted grating. The system has applications in remote sensing of ocean turbulence and seismic activity.
APA, Harvard, Vancouver, ISO, and other styles
5

Zhang, Yan, Sanguo Li, Robert Pastore, Zhifan Yin, and Hong-liang Cui. "Detection of seismic signal using fiber Bragg grating sensors." In Optics East 2006, edited by Michael A. Marcus, Brian Culshaw, and John P. Dakin. SPIE, 2006. http://dx.doi.org/10.1117/12.686166.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Tait, Gregory, and Allen Ervin. "The detection and characterization of weak seismic waves using optical fiber Bragg grating sensor." In Fiber Optic Sensors and Applications XV, edited by Henry H. Du, Alexis Mendez, and Christopher S. Baldwin. SPIE, 2018. http://dx.doi.org/10.1117/12.2303443.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Sun, Zhihui, Meng Wang, Shujuan Li, Li Min, Yuanyuan Yang, Jiasheng Ni, and Chang Wang. "A high sensitivity fiber Bragg grating seismic sensor system for intrusion detection." In Joint TC1 - TC2 International Symposium on Photonics and Education in Measurement Science 2019, edited by Bernhard Zagar, Pawel Mazurek, Maik Rosenberger, and Paul-Gerald Dittrich. SPIE, 2019. http://dx.doi.org/10.1117/12.2532728.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Li, Ming, Meng Wang, Xiaolei Zhang, Zhong Zhao, Guanghu Hao, Gang-Ding Peng, Zhihui Sun, Shaodong Jiang, Lin Zhang, and Chang Wang. "A high sensitivity fiber Bragg grating seismic system and oil exploration test." In International Conference on Optical Instruments and Technology 2017: Advanced Optical Sensor and Applications, edited by Liquan Dong, Xuping Zhang, Hai Xiao, and Francisco Javier Arregui. SPIE, 2018. http://dx.doi.org/10.1117/12.2295465.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Zhou, Ruixiang, Xunli Yin, and Xueguang Qiao. "Ultrasonic imaging of seismic physical models using fiber Bragg grating Fabry-Perot probe." In 25th International Conference on Optical Fiber Sensors, edited by Youngjoo Chung, Wei Jin, Byoungho Lee, John Canning, Kentaro Nakamura, and Libo Yuan. SPIE, 2017. http://dx.doi.org/10.1117/12.2262283.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Chang, Sung-Jin, and Nam-Sik Kim. "Development of smart seismic bridge bearing using fiber optic Bragg-grating sensors." In SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, edited by Jerome P. Lynch, Chung-Bang Yun, and Kon-Well Wang. SPIE, 2013. http://dx.doi.org/10.1117/12.2009629.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Fiber Bragg Grating Seismic Sensor"

1

Crespo, Antonio. Error Measurements in an Acousto-Optic Tunable Filter Fiber Bragg Grating Sensor System. Fort Belvoir, VA: Defense Technical Information Center, May 1994. http://dx.doi.org/10.21236/ada283912.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Fiber Bragg Grating Seismic Sensor' for particular source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography